Related
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Now restore or install any ROM.
Napstar said:
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Click to expand...
Click to collapse
Now it would sound so silly to you Napstar, but I have to accept it that I don't know how and I dont want to take a wrong direction. Since I'm very new to this, can you help guiding me on how to install ROMs. Yes, you are right I can still get into recovery mode, but I just don't know how to continue and where I can get all those ROMs. Please bear with me.
Thank you, Pitt.
just go to android development section and look at the beginner guide its easy don't worry
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
need guide to install ROMs
kshitij_bhatt said:
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
Click to expand...
Click to collapse
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
pittms said:
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
Click to expand...
Click to collapse
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
take A99 from here : https://www.sugarsync.com/share/ddhcyiw66cyqt
do as i mentioned above and ud be ok
haree said:
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
do as i mentioned above and ud be ok
Click to expand...
Click to collapse
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
okk now u got it all wrong/// uc kernals are NOT ROMS u need to download the .zip file for them and copy to sd card reboot into cwm recovery and install zip from sd card
u are getting it all wrong these are Not roms these are kernals ./... and i will suggest u not to install as i can see its a heavy thing and u r not familiar with kernals and roms...
first of all u need to download software update tool
then u need stock firmware which u could find here
mostly all the files u need are available HERE
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
haree said:
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
Click to expand...
Click to collapse
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
pittms said:
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
Click to expand...
Click to collapse
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
Which recovery version are you using?
CWM v5.0.2.3 has an option for mounting sdcard as USB device.
Boot into recovery
Connect your device to PC via USB
Option mount and storage >> mount USB storae
Stay in that menu till you want to use your sdcard (for copying files)
If you have recovery menu v2.
Choose CWM recovery first and do nb0 file copying by following above instructions.
Then reboot into recovery (advanced >> reboot recovery)
Choose stock recovery and choose install firmware.nb0 option.
If this gives any errors post it here. Someone amongst us will surely help you.
Best of luck!
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
hi
i dont get it
1. is ur USB cable not working
if working then all u need to do is connect ur phone to pc and copy the fbo to root of sd and do the flash
2. u can do Napsters method
3. if u have a Sd adapter then use it and copy the Fb0 to root of sd and do the needfull
goodluck
Now it is back to work again. Thank you very much for all the hands!!
Sent from my CSL-MI410 using XDA App
WELLCOM A99(Thai) i need ROM PLZ help me
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
cazwj said:
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
Click to expand...
Click to collapse
hi
a little bit of searching would have solved ur problem
it is available in the rollup thread anyway take it from below link
Link : http://www.mediafire.com/FB400
guys i have a bigg problem i have a galaxy S i9000 and im using the 2.3.6 xxjvt gamerzrom but when i flash the clackworkmod recovery with rom manager it gives that the operation has finished well but when i reboot in recovery it gives me a recovery like stock recovery i cant do a backup i cant restore i cant do anything plz guys if there an other way the make a backup help me
thank you guys very much i really apreciat it
haboo 200 said:
guys i have a bigg problem i have a galaxy S i9000 and im using the 2.3.6 xxjvt gamerzrom but when i flash the clackworkmod recovery with rom manager it gives that the operation has finished well but when i reboot in recovery it gives me a recovery like stock recovery i cant do a backup i cant restore i cant do anything plz guys if there an other way the make a backup help me
thank you guys very much i really apreciat it
Click to expand...
Click to collapse
Flash a kernel with CWM, http://forum.xda-developers.com/showthread.php?t=1112908
Backups can be made by titanium backup or backup apps from market
if i flash this kernel will ,my apps be gone or what ????
haboo 200 said:
if i flash this kernel will ,my apps be gone or what ????
Click to expand...
Click to collapse
nope, your apps will be all there
thank you very much man than you :good: :good: :good:
haboo 200 said:
thank you very much man than you :good: :good: :good:
Click to expand...
Click to collapse
Did you notice that thanks button? or my signature:laugh:
glad its what you wanted
What to do
choose the 3rd option in the normal recovery mode twice and you will go to the cwm recovery.
Try to read a little more.
http://forum.xda-developers.com/showthread.php?t=928149
Hai guys
I've rooted my ace, and I've installed cyanogenmod 9 rc2 from maclaw studio's. But I want to go back to the stockrom. I've made a backup before (by clockwork mod), so my question is, can I restore it and use my original rom (android 2.3.5). I haven't tried it before. Should I do something else before. Need I Odin. Plz help.
Hi pal!
You could restore your previous nandroidbackup from the recovery without any problem.
Sent from my GT-S5830
You can restore,but if you have bootloop after restoring just wipe both caches
Sent from my GT-S5830 using xda app-developers app
Tnx guys!
I'll try it
Tob1234 said:
Tnx guys!
I'll try it
Click to expand...
Click to collapse
You're welcome.
Good luck!
But my phone isn't rooted any more. (After the update, I don't know why). Must my phone be rooted before the restore, or isn't it necessary.
I think you need CWM recovery; and so, yes, you need root before.
Anyway, before doing anything you may do another nandroid backup of your new firmware..
Good luck
Edit:
You could read this link
"Nielli's [GUIDE] Guides and Tips How to Root SGA, Install CWM5 and install Mods + Downloads"
In the link you'll find the last stable recovery -version 5.0.2.6- and much more.
Good luck again!
Sent from my GT-S5830
R: [Q] How to get back to Stock rom ace HELP please
Root is not needed in order to use the CWM correctly. If you restore your backup successfully and everything works you're ok I few time ago I installed CM 7.2 on my Ace with CWM without pre-rooted rom on.
Inviato dal mio GT-S5830
Hi, have u tried to flash the official firmware by Odin?
It's Very Easy my friend
Simple Bro , Download the firmware files from sammobile.com then Google for Galaxy Ace Odin ..I guess the version is 4.38 or something like that ..and make sure you download the cooper file with it then flash the original firmware using Odin.So then your phone is back to how it was when you bought it..now flash CWM Recovery again and then restore your back up.
I hope this was helpful.
If you want the instructions on how to do this ..let me know ..I'll give you think link for the files also
Vishrut Chhajer said:
Simple Bro , Download the firmware files from sammobile.com then Google for Galaxy Ace Odin ..I guess the version is 4.38 or something like that ..and make sure you download the cooper file with it then flash the original firmware using Odin.So then your phone is back to how it was when you bought it..now flash CWM Recovery again and then restore your back up.
I hope this was helpful.
If you want the instructions on how to do this ..let me know ..I'll give you think link for the files also
Click to expand...
Click to collapse
But can I simply restore the backup from clockworkmod with the firmware in it, or should I do it with Odin.
BajoPrimate said:
I think you need CWM recovery; and so, yes, you need root before.
Anyway, before doing anything you may do another nandroid backup of your new firmware..
Good luck
Edit:
You could read this link
"Nielli's [GUIDE] Guides and Tips How to Root SGA, Install CWM5 and install Mods + Downloads"
In the link you'll find the last stable recovery -version 5.0.2.6- and much more.
Good luck again!
Sent from my GT-S5830
Click to expand...
Click to collapse
Should I install the same root file by clockworkmod, or another file, because it's the second time. I have already superuser on my phone, but it don't give privileges at my apps. It's very strange. Thanks for your help.
Tob1234 said:
Should I install the same root file by clockworkmod, or another file, because it's the second time. I have already superuser on my phone, but it don't give privileges at my apps. It's very strange. Thanks for your help.
Click to expand...
Click to collapse
Hi Tob1234!
The rooting method depends on phone's firmware (and android version), search for yours.
If one method doesn´t work for you, you could try another, eventually you'll get it.
You also could install from recovery -CWM- (acording to the OP's instructions) any stock ROM from the threads thus, as you know, they are already rooted.
BTW, I'm on a sotck one: NaTHaN's ROM with Space Kernel and, for me, all goes like a charm.
Good luck!
BajoPrimate said:
Hi Tob1234!
The rooting method depends on phone's firmware (and android version), search for yours.
If one method doesn´t work for you, you could try another, eventually you'll get it.
You also could install from recovery -CWM- (acording to the OP's instructions) any stock ROM from the threads thus, as you know, they are already rooted.
BTW, I'm on a sotck one: NaTHaN's ROM with Space Kernel and, for me, all goes like a charm.
Good luck!
Click to expand...
Click to collapse
Hi
My phone's firmware is maclaw studios rc 2 (sept. 2012). My version is android 4.0.4. Need I a root file from android 4.0.4 to go back to the default rom? I only want to go back to android 2.3.5. When I restore my backup, is my firmware than the same like before, or not.
Thanks for your help
You could try hubix's guide http://forum.xda-developers.com/showthread.php?t=1034145
Good luck!
Sent from my GT-S5830
BajoPrimate said:
You could try hubix's guide http://forum.xda-developers.com/showthread.php?t=1034145
Good luck!
Sent from my GT-S5830
Click to expand...
Click to collapse
Hi, thanks for the link. But when I restore my backup, made with my old rom, I would be back to that rom, or not. That sounds easier. And, if I need Odin, is it possible that I can use it, because I've read on a site that you can't use Odin when you have used clockworkmod.
Tob1234 said:
Hi, thanks for the link. But when I restore my backup, made with my old rom, I would be back to that rom, or not. That sounds easier. And, if I need Odin, is it possible that I can use it, because I've read on a site that you can't use Odin when you have used clockworkmod.
Click to expand...
Click to collapse
Hi Tob1234!, when you restore your backup, made with your old rom, you go back to that rom as it was when you did that backup (apps, settings and all).
You don't need Odin for doing that, just use CWM recovery if you want to restore your old backup made with CWM.
You can use Odin, but with other special files, NOT with nandroid backups.
To have CWM or not doesn't matter for using Odin.
BTW, all this stuff is in the links.
Good luck, Tob!
BajoPrimate said:
Hi Tob1234!, when you restore your backup, made with your old rom, you go back to that rom as it was when you did that backup (apps, settings and all).
You don't need Odin for doing that, just use CWM recovery if you want to restore your old backup made with CWM.
You can use Odin, but with other special files, NOT with nandroid backups.
To have CWM or not doesn't matter for using Odin.
BTW, all this stuff is in the links.
Good luck, Tob!
Click to expand...
Click to collapse
I'm going to try that.
Thanks for your help!
BajoPrimate said:
Hi Tob1234!, when you restore your backup, made with your old rom, you go back to that rom as it was when you did that backup (apps, settings and all).
You don't need Odin for doing that, just use CWM recovery if you want to restore your old backup made with CWM.
You can use Odin, but with other special files, NOT with nandroid backups.
To have CWM or not doesn't matter for using Odin.
BTW, all this stuff is in the links.
Good luck, Tob!
Click to expand...
Click to collapse
My last question :s
Should I delete all before I restore my backup? (System settings, cache, dalvik) by clockworkmod?
Tob1234 said:
My last question :s
Should I delete all before I restore my backup? (System settings, cache, dalvik) by clockworkmod?
Click to expand...
Click to collapse
Yes !
pimp my rom bricked my 1890n please help me it freezes at s3 min logo. I can only access download mode the 3 button recovery has never worked i tryed flashing the 3 button recovery from odin several times but it wont work. I need a way to flash a clean build.prop via odin or for someone who has the 1890n to do a nandroid then reset there phone do a nandroid of the reset version then send me the nandroid of the reset version and then you can load up your non reset backup. please help my mums going to kill me i just got this phone last month. im a noob when it comes to rooting
stephen.brader said:
pimp my rom bricked my 1890n please help me it freezes at s3 min logo. I can only access download mode the 3 button recovery has never worked i tryed flashing the 3 button recovery from odin several times but it wont work. I need a way to flash a clean build.prop via odin or for someone who has the 1890n to do a nandroid then reset there phone do a nandroid of the reset version then send me the nandroid of the reset version and then you can load up your non reset backup. please help my mums going to kill me i just got this phone last month. im a noob when it comes to rooting
Click to expand...
Click to collapse
Wow..take it easy man .. if you can access download mode I don't see any problem..just flash stock firmware via Odin and you're good to go...search around...
can you send me a link to stock firmware
download this param and flash via odin dl.xda-developers.com/attachdl/723b...1497d4/5173f146/1/5/4/4/1/7/5/PARAM_I8190.zip (Y)
Sent from my GT-I8190 using xda app-developers app
stephen.brader said:
can you send me a link to stock firmware
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/
make sure you're flashing the right one for your model....
Ok.. so I've CWM with CoCore kernel installed on stock JB... I want to get the new CM 11 by TC but am afraid of risk... I've taken a nandroid backup of my phone through CWM... so after installing CM11 if I don't like it can I get into stock ROM BYU restoring my Nandroid backup??? if not then how can I restore my stock ROM without downloading it again????
jfreak27 said:
Ok.. so I've CWM with CoCore kernel installed on stock JB... I want to get the new CM 11 by TC but am afraid of risk... I've taken a nandroid backup of my phone through CWM... so after installing CM11 if I don't like it can I get into stock ROM BYU restoring my Nandroid backup??? if not then how can I restore my stock ROM without downloading it again????
Click to expand...
Click to collapse
If you want to revert back to stock from cm11.you have to flash the stock ROM through Odin then root it then flash cocore kernel and restore nandroid backup.
If not want to go through PC then
First flash custom ROM 4.3 make all wipes and format then flash cm 10.1 with all wipes and format (especially /preload partition) flash cocore again wipe all then restore nandroid backup.
Sent from my GT-I9070 using XDA Premium 4 mobile app
I want nandroid backup of any stock rom
I accidentally forgot to backup it ...
Please reply me...
PM me...
Please...
Sent from my GT-S5570
Suraj08 said:
I want nandroid backup of any stock rom
I accidentally forgot to backup it ...
Please reply me...
PM me...
Please...
Sent from my GT-S5570
Click to expand...
Click to collapse
Why would somebody give you this backup considering that it contains data, settings and personal information?
As I see in your signature you have a totally different phone model than Galaxy S Advance GT-I9070, can you be more specific with what you need?
up
R_a_z_v_a_n said:
Why would somebody give you this backup considering that it contains data, settings and personal information?
As I see in your signature you have a totally different phone model than Galaxy S Advance GT-I9070, can you be more specific with what you need?
Click to expand...
Click to collapse
Thanks
So how to go back to stock?
I tried on my lapi.
it doesnt detect device...
so i tried on other versions of odin but fails again...
so if i want to go back to stock, how to solve it...?
Suraj08 said:
Thanks
So how to go back to stock?
I tried on my lapi.
it doesnt detect device...
so i tried on other versions of odin but fails again...
so if i want to go back to stock, how to solve it...?
Click to expand...
Click to collapse
Install Samsung Android usb drivers (google it). Put phone in Download mode and use Odin.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Install Samsung Android usb drivers (google it). Put phone in Download mode and use Odin.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I installed kies but even it not worked for me....
let it be...
m on future next now...
tell me the best rom....:good:
Suraj08 said:
I installed kies but even it not worked for me....
let it be...
m on future next now...
tell me the best rom....:good:
Click to expand...
Click to collapse
There is no "best rom".
I told you to install Samsung USB drivers, not Kies. Sometimes Kies is making you a problem when you are in Download mode. Turn it off on PC, remove it in Task manager too.