[APP][Port][CM12] MaxxAudio from ColorOS - ONE Themes and Apps

Hi, this is another port of MaxxAudio from ColorOS which is ported to a CM12 ROM by a chinese developer, rom's link here
I pulled the files from the ROM and added some missing files which is required by the audio_effect.conf
I also pulled the OppoGesture from the ROM but I'm not able to integrate it into system so it's kind of useless
Before install this I recommend you to backup your system because I'm not going to make a revert zip.
**This zip is taken from the v4a for lollipop installer so it will delete your audiofx etc, I added a few lines to set permission but if it doesnt set successfully you have to set it urself (Sorry, didnt make installer zip for a long time already)
BUG: Custom setting doesnt stick after reboot, others seems worked fine, you can "logcat | grep wave" to see the status
Have to re-enable after each mode change
[EDIT][NEW UPLOAD] New zip uploaded as I forgot to put the maxxaudio apk file in the zip file, I won't mind if you call me retard, now after flash it should have the maxxaudio running as a visible service in your statusbar like my screenshot

Seems it's written in Chinese..

I think u can understand the logo dont u

Thx a lot
But i get a ´error in updatater script´when trying to flash on x9076 qhd, i know its for one plus but Soralz version flashes and works just great on my device?
Is it possible to correct this, i would really like to try this port!!

im not sure, maybe u can try manual install

Thank you for making this!!

Mecca EL said:
Thank you for making this!!
Click to expand...
Click to collapse
zip working?

ImbaWind said:
....
Click to expand...
Click to collapse
Can you also upload the maxxaudio.apk

Mecca EL said:
Thank you for making this!!
Click to expand...
Click to collapse
Can you upload the maxxaudio.apk too ..

omg please call me a f==king dumb

ImbaWind said:
omg please call me a f==king dumb
Click to expand...
Click to collapse
I didn't get it .
Did I say something wrong ?
Or is the maxxaudio.apk in the zip already ?

@aki_007 new zip uploaded, thanks for telling me !

ImbaWind said:
Hi, this is another port of MaxxAudio from ColorOS which is ported to a CM12 ROM by a chinese developer, rom's link here
I pulled the files from the ROM and added some missing files which is required by the audio_effect.conf
I also pulled the OppoGesture from the ROM but I'm not able to integrate it into system so it's kind of useless
Before install this I recommend you to backup your system because I'm not going to make a revert zip.
**This zip is taken from the v4a for lollipop installer so it will delete your audiofx etc, I added a few lines to set permission but if it doesnt set successfully you have to set it urself (Sorry, didnt make installer zip for a long time already)
BUG: Custom setting doesnt stick after reboot, others seems worked fine, you can "logcat | grep wave" to see the status
Have to re-enable after each mode change
[EDIT][NEW UPLOAD] New zip uploaded as I forgot to put the maxxaudio apk file in the zip file, I won't mind if you call me retard, now after flash it should have the maxxaudio running as a visible service in your statusbar like my screenshot
Click to expand...
Click to collapse
Flashed it on CM12.1 didn't work. Also recovery warn me about the permissions error....what do I have to fix manually? If I look into system/app/com.maxx.... i find everything set.

You can just set everything to 777 manually, I never tried it on 12.1 tho

Related

Need help deodexing my custom ROM

Hi Xda-people,
After succes building a rom for the vodafone 845 I now want to deodex the rom. I have already tried the THEME-PRO v2.9 (no error on deodexing) after flashing only getting a bootloop. I olso tried another deodexing kitchen but that got stuck on bleutooth.odex and another couple apk's and odex files.
Could someone please help me out here?
Thanx in advance
So its a stock android rom ? Try the deodex script link in my signature.
Also for bluetooth u need to add javax.obex.jar to ur classpath.
Daneshm90 said:
So its a stock android rom ? Try the deodex script link in my signature.
Also for bluetooth u need to add javax.obex.jar to ur classpath.
Click to expand...
Click to collapse
i have tried your script and got stuck on a couple of apk's + odex files that could'nt be deodexed.. could you also explain what you mean with add javax-obex.jar to ur classpath? I'm complete new to the rombuild scene..
it's based on a stock rom, i have added some features and delete some standaard apps..
freddyemmer said:
i have tried your script and got stuck on a couple of apk's + odex files that could'nt be deodexed.. could you also explain what you mean with add javax-obex.jar to ur classpath? I'm complete new to the rombuild scene..
it's based on a stock rom, i have added some features and delete some standaard apps..
Click to expand...
Click to collapse
Ok once its done deodexing, u'll have a couple of apks left that couldn't be deodexed. If its bluetooth.apk, select option 2 (custom classpath) and type javax.obex.jar
Most of the time the error u get when deodexing should tell u wht apk it needs in its classpath.
But when i use your script i don't see the errors because it's continue's to the next apk.. or framework. this rom also has 2 framework apks does that matter?
freddyemmer said:
But when i use your script i don't see the errors because it's continue's to the next apk.. or framework. this rom also has 2 framework apks does that matter?
Click to expand...
Click to collapse
Can u upload the rom, ill deodex n upload it back. ill let u know what i did.
http://www.mediafire.com/?d754c9ljn48c368
that's my rom.. Thanx in advance...
Ok cool so got the whole rom deodexed.
For bluetooth u needed javax.obex.jar and for the rest u needed com.google.android.gtalkservice.jar in ur classpath.
Uploading shortly...
Here u go
Link
For bluetooth u needed javax.obex.jar and for the rest u needed com.google.android.gtalkservice.jar in ur classpath
Click to expand...
Click to collapse
so if i got it right you choose option 2 and typte
javax.obex.jar:com.google.android.gtalkservice.jar
freddyemmer said:
so if i got it right you choose option 2 and typte
javax.obex.jar:com.google.android.gtalkservice.jar
Click to expand...
Click to collapse
Yup. I did em individually but doesn't matter that way should work as well.
Daneshm90 said:
Yup. I did em individually but doesn't matter that way should work as well.
Click to expand...
Click to collapse
help again adding the new apk and framework files i get a fc on com.android.phone.. please help..
freddyemmer said:
help again adding the new apk and framework files i get a fc on com.android.phone.. please help..
Click to expand...
Click to collapse
Are u wiping and flashing ?
Daneshm90 said:
Are u wiping and flashing ?
Click to expand...
Click to collapse
i replaced all the apps and framework in my working folder zipped and signed did a full wipe and flashed it.. then setup came up and saying fc on phone
freddyemmer said:
i replaced all the apps and framework in my working folder zipped and signed did a full wipe and flashed it.. then setup came up and saying fc on phone
Click to expand...
Click to collapse
Hmmm. Can u check ur log to see why it force-closes ? also does it let u continue or are u stuck at setup ? i want to know if other apps fc.
it won't allow me to finish the setup.. maybe stupid question but how do i get the log?
freddyemmer said:
it won't allow me to finish the setup.. maybe stupid question but how do i get the log?
Click to expand...
Click to collapse
Type "adb logcat" in command prompt.
Oke tried it but logcat is disabled on my rom.. I used the commands in recovery
echo 1 > /sys/kernel/logger/log_main/enable // ** '1' is enable log_main,
echo 2 >/sys/kernel/logger/log_main/priority // ** '2' is the log level, you can get the level number from the android source code.
but that apparently has no effect for the rom.. I think something went wrong while deodexing.. any tips how to enable the logcat?
tried deodexing it again with the 2 yar files.. it's not only phone that fc also setup fc.. trying to find out how to add catlog to my rom so i can check it..

[FIX]Offline RCTweaks by RCTeam|Sebastiaan15|Prof Peach

First, lets clarify the credits:
RCTeam provided the tweaks in the first place
Sebastiaan15 fixed tweaks scripts to use files stored od sdcard instead of hosted ones on Robociks server (which are down) for his rom (http://forum.xda-developers.com/showthread.php?t=1315961&highlight=runnymede+aio)
Prof Peach for creating a flashable zip for desire (http://forum.xda-developers.com/showthread.php?t=1517975&highlight=tweaks+fix)
all i did was fix the updater script to work on DHD, and fix the tweaks scripts where necesary, because desire uses sd-ext for some system files
what is this
this is a fix for all of us still using sense 3.5 roms with RCTweaks, which makes pretty much all of the tweaks work again without using the offline server(fonts,bootanims,oc daemons...). this changes tweaks scripts to use files stored on sdcard(included in zip). everything should work, except settings/rctweaks/extras/recommended apps(avalible in play store) and updating of the rctweaks. if you find something else not working, please report and i will do my best to fix it.
how to
i would recommend to do a nand backup first, just in case
flash zip through recovery like any other flashable zip
do not delete /sdcard/.RCTeam folder, the files needed for the tweaks are in there!
do not click on update tweaks in settings/rctweaks/extras because it will delete tweaks apk and you will have to manually push it back
i found this fix a while back while trying to locate a flashable zip of virtuous oc via google. i had no idea where it came from or how it works. Thank you Prof Peach for providing a source for that zip, so i am able to give proper credits.
tested on
for now, only RCMix 4.0
i think it should work on any sense 3.5 rom which uses RCTweaks. so if anyone is willing to test on any other rom, please report so i can add to this post
my edited update script(originally made by Prof Peach) is very basic. it works for me in 4ext, i havent tested in cwm
and for the end, standard disclaimer: i am not responsible if anything goes wrong. i will try my best to help, but my knowledge is very limited. also, please dont bug people in credits for the mistakes i might have made
download
http://www.fileswap.com/dl/WsochGJWXK/DHD_RCTeam_Fix_Signed.zip.html
if you like this, and would like to thank someone, please thank all the people in credits before me, it is mostly their work not mine
Works great, thanks!
Sent from my Inspire 4G using xda premium
Confirmed working on Pacha Xtreme V2 Rom, used CWM so confirmed that works too Thanks for this
on patchas rom bootanimations didnt work and swype to clear was removed when switching black/white systemui in tweaks. fixed in new version of rom
Yesterday I tried with android revolution HD 7.0.3 and then I get problems with status. status has disappeared completely. someone has the same problem?
pattamalati said:
Yesterday I tried with android revolution HD 7.0.3 and then I get problems with status. status has disappeared completely. someone has the same problem?
Click to expand...
Click to collapse
it cant work, because this does not contain full rctweaks, neither does arhd. if you have rctweaks installed, status bar should come back after reboot.
if none of this is the case, extract /system/app/systemui.apk from original rom zip and push via adb, or copy to same folder on your device using root explorer or something similar .dont forget to set permissions rw-r-r
thank you ,it's working with rctweaks V2 for runnydroid 5.1.......great job !!
Having an issue downloading... It won't download...
Download dont works,any help..other mirror?
Many thanks
works for me, downloading as i type on my mobile. you guys tried on mobile or desktop?
t0mas_ said:
works for me, downloading as i type on my mobile. you guys tried on mobile or desktop?
Click to expand...
Click to collapse
Wont download on my noble, r u saying it will on desktop?
it should yes. im saying that generally the download does work. might be region/isp/mobile related. i can surely post some mirror, but other download sites have the annoying waiting that i really want to avoid.
Volume Camera key not working on Pacha Xtreme Rom Any idea?
t0mas_ said:
it cant work, because this does not contain full rctweaks, neither does arhd. if you have rctweaks installed, status bar should come back after reboot.
if none of this is the case, extract /system/app/systemui.apk from original rom zip and push via adb, or copy to same folder on your device using root explorer or something similar .dont forget to set permissions rw-r-r
Click to expand...
Click to collapse
thank you. now work perfect
.RaZor. said:
Volume Camera key not working on Pacha Xtreme Rom Any idea?
Click to expand...
Click to collapse
huh, not really unfortunately. i havent tested this even in rcmix, because lyoptas camera i'm using has this option built in. check settings menu in camera app, with some luck the function will be there
pattamalati said:
thank you. now work perfect
Click to expand...
Click to collapse
very nice to hear that
.RaZor. said:
Volume Camera key not working on Pacha Xtreme Rom Any idea?
Click to expand...
Click to collapse
well, i made a test on my rom, and the scripts themselves work, but in my case camera obviously uses built in sounds(in apk), which makes it not "see" the changes. i looked in patchas roms zip and sound files are in same place then rcmix. so i guess your case is the same as mine. check camera settings
I installed lyapota camera for runny and is working great thanks
great, thats what im using
epic

[App] Viper4Droid Custom Themed Material (Tester Needed)

Viper4Android FX
Complete Revamped Material Light
I have tested this on Turbo Rom 6.0.1 and found it working flawlessly but I need some testers to try it on other custom roms running on LP or even other devices.
I have attached the screenies and the flashable zip as well as individual apk file.
INSTALLATION
Make sure your linux mode is set to premmissive.
You can use this app from here http://forum.xda-developers.com/showthread.php?t=2524485
Make sure busybox is also installed.
Download and install the official Viper4Android FX from the official site.
Then open official app and install the drivers of your own choice. Then reboot your device.
Once all is done install and open the revamped viper and check the drivers status. If the drivers are properly installed then uninstall the official app. Enjoy.
If you have already installed official Viper4Droid then uninstall it first or using root explorer replace it. :laugh:
Viper Official:- http://forum.xda-developers.com/showthread.php?t=2191223
Credits :- MoKee Open Source
Testers please let me know if it worked or not.
Don't forget to press Thanks.​
Downloading.. Will tell you abt it later!
Edit: This App Doesn't Seem To Work On Amigo OS (5.1.1) My SeLinux Is Permissive! After Openings The App I Didn't Find Any Way To Install Drivers! I Am Attaching Screenshot!
Downloading dude. Will give feedback...
---------- Post added at 01:12 PM ---------- Previous post was at 01:00 PM ----------
Sorry bro, now I'm using 4.4.2. Can't give feedback ??
thedevilashish said:
Downloading.. Will tell you abt it later!
Edit: This App Doesn't Seem To Work On Amigo OS (5.1.1) My SeLinux Is Permissive! After Openings The App I Didn't Find Any Way To Install Drivers! I Am Attaching Screenshot!
Click to expand...
Click to collapse
Oh... I thought its gonna happen. Drivers should be preinstalled. For now to get it working you have to try DivineDolbyAtmos which preinstalls viper drivers.
http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
Will update the thread with flashable zip which preinstalls the drivers.:good:
Thanks for your feedback. Alternatively you can use official app to install drivers and then replace it with the revamped one. Hope this will work and you liked the new ui too...
Arcade said:
Oh... I thought its gonna happen. Drivers should be preinstalled. For now to get it working you have to try DivineDolbyAtmos which preinstalls viper drivers.
http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
Will update the thread with flashable zip which preinstalls the drivers.:good:
Thanks for your feedback. Alternatively you can use official app to install drivers and then replace it with the revamped one. Hope this will work and you liked the new ui too...
Click to expand...
Click to collapse
I will try and let you know btw, the new app looks WOW ? Nice work mate!
---------- Post added at 09:35 PM ---------- Previous post was at 09:35 PM ----------
Arcade said:
Oh... I thought its gonna happen. Drivers should be preinstalled. For now to get it working you have to try DivineDolbyAtmos which preinstalls viper drivers.
http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
Will update the thread with flashable zip which preinstalls the drivers.:good:
Thanks for your feedback. Alternatively you can use official app to install drivers and then replace it with the revamped one. Hope this will work and you liked the new ui too...
Click to expand...
Click to collapse
I will try and let you know btw, the new app looks WOW ? Nice work mate!
prantokp said:
Downloading dude. Will give feedback...
---------- Post added at 01:12 PM ---------- Previous post was at 01:00 PM ----------
Sorry bro, now I'm using 4.4.2. Can't give feedback ����
Click to expand...
Click to collapse
Installed on CM13 RR Remix. But not found any option for installing driver!!
but I've installed driver using the official version of V4A & used yours. And its works fine!!
prantokp said:
Installed on CM13 RR Remix. But not found any option for installing driver!!
but I've installer driver using the official version of V4A & used yours. And its works fine!!
Click to expand...
Click to collapse
Same as I thought the drivers should be installed using the official app and then it can be easily replaced.
Thanks for your kind feedback. I hope you would have liked its ui and design.
Don't forget to share and press thanks.
Arcade said:
Same as I thought the drivers should be installed using the official app and then it can be easily replaced.
Thanks for your kind feedback. I hope you would have liked its ui and design.
Don't forget to share and press thanks.
Click to expand...
Click to collapse
Oh yes. I liked the theme very much. But why don't you try to add driver installation option?
It will better if you do this.
And Tnx for your hard work on v4a. ☺
Arcade said:
Same as I thought the drivers should be installed using the official app and then it can be easily replaced.
Thanks for your kind feedback. I hope you would have liked its ui and design.
Don't forget to share and press thanks.
Click to expand...
Click to collapse
prantokp said:
Oh yes. I liked the theme very much. But why don't you try to add driver installation option?
It will better if you do this.
And Tnx for your hard work on v4a.
Click to expand...
Click to collapse
@Arcade Thanks for sharing !
This is direct from the Mokee ROM port by @[email protected] right ?
I've been using this ROM/V4A on osprey XT1550 for a week or so and it's a nice, clean and intuitive interface.
The sound quality, performance and features are same as official.
The most useful change is probably the extra detail & control gained from the new EQ interface !
For those asking about drivers;
This is the newest V4A v2.4.0.1 and there is only one driver (NEON) to install per arch (arm or x86) which is why you won't see the option dialogue anymore.
There is no point installing the old version just for the drivers as this apk has its own and will not currently utilise any others.
The apk can be swapped with an already installed V4A 2401 (rename & set perm if required then reboot) and should not have any issues.
If manually changing apk in /system from an older version ie 23XX, you may encounter problems.
Source can be found here once github is updated.
edit: If someone is going to modify this apk they should include a dark theme
Any chance for 2.3.4.0 version for use with ARISE by @guitardedhero?
Roi007leaf said:
Any chance for 2.3.4.0 version for use with ARISE by @guitardedhero?
Click to expand...
Click to collapse
Working on it
Here is V4A v2.3.4.0 with Mokee theme !!
New apk (should) have the same signature so try replacing apk & setperm if v2340 is already installed
If you already have v2401 or Mokee's v6.0.1 you may have to uninstall it first.
**Has not been tested at all so 'ware dragons**
Pls provide details/screenshots of any errors and report back !!
Edit: pulled attachment, not working yet, stay tuned
Deleted
Lukest85 said:
Here is V4A v2.3.4.0 with Mokee theme !!
New apk (should) have the same signature so try replacing apk & setperm if v2340 is already installed
If you already have v2401 or Mokee's v6.0.1 you may have to uninstall it first.
**Has not been tested at all so 'ware dragons**
Pls provide details/screenshots of any errors and report back !!
Edit: pulled attachment, not working yet, stay tuned
Click to expand...
Click to collapse
Any update regarding this version bro?
Roi007leaf said:
Any update regarding this version bro?
Click to expand...
Click to collapse
I know everyone is eager to see some shiny new materialistic goodies so here's a quick update for y'all:
I've uploaded another test apk, some source files and build files to Gdrive here.
For the brave wanting to try the apk;
Download from the 'Testing' folder, swap it with your existing apk (rename if necessary and set permissions) then reboot and report back.
NB: I doubt it will work as recompiling source with no mods gave me (the same) package installer error so likely my windows build env is doing it's thing.
Details
Changes so far
Removed all references/layout for AnologX
Ported theme to the old apk
Checked/updated smali and androidmanifest (I'm still new to apk mods so could be errors)
Created an alternate apk with dark/night theme as default
To-Do
Fix compiling/porting issue
Add theme switcher for single apk
There's always more
I built some other test apks and no errors recompiling (the original one I posted was fine also) but android package installer (tried multiple ROMs) still doesn't like it.
If anyone has experience porting/theming and would like to take a look and/or contribute pls PM me !!
*nudge nudge* @Viper4713 @metaspook
I will give this some attention over the coming week/s and should have more than just a new theme to share with the next update !
Lukest85 said:
I know everyone is eager to see some shiny new materialistic goodies so here's a quick update for y'all:
I've uploaded another test apk, some source files and build files to Gdrive here.
For the brave wanting to try the apk;
Download from the 'Testing' folder, swap it with your existing apk (rename if necessary and set permissions) then reboot and report back.
NB:I doubt it will work as recompiling source with no mods gave me (the same) package installer error so likely my windows build env is doing it's thing.
Details
Changes so far
Removed all references/layout for AnologX
Ported theme to the old apk
Checked/updated smali and androidmanifest (I'm still new to apk mods so could be errors)
Created an alternate apk with dark/night theme as default
To-Do
Fix compiling/porting issue
Add theme switcher for single apk
There's always more
I built some other test apks and no errors recompiling (the original one I posted was fine also) but android package installer (tried multiple ROMs) still doesn't like it.
If anyone has experience porting/theming and would like to take a look and/or contribute pls PM me !!
*nudge nudge* @[email protected]
I will give this some attention over the coming week/s and should have more than just a new theme to share with the next update !
Click to expand...
Click to collapse
Tried the test..can't see the app in the drawer even after giving the rwrr
Roi007leaf said:
Tried the test..can't see the app in the drawer even after giving the rwrr
Click to expand...
Click to collapse
I confirm
Roi007leaf said:
Tried the test..can't see the app in the drawer even after giving the rwrr
Click to expand...
Click to collapse
RSDamasceno said:
I confirm
Click to expand...
Click to collapse
Thankyou for reporting back ! :good:
I'll post here with an update when I upload another.
Arcade said:
Viper4Android FX
Complete Revamped Material Light
I have tested this on Turbo Rom 6.0.1 and found it working flawlessly but I need some testers to try it on other custom roms running on LP or even other devices.
I have attached the screenies and the flashable zip as well as individual apk file.
INSTALLATION
Make sure your linux mode is set to premmissive.
You can use this app from here http://forum.xda-developers.com/showthread.php?t=2524485
Make sure busybox is also installed.
Download and install the official Viper4Android FX from the official site.
Then open official app and install the drivers of your own choice. Then reboot your device.
Once all is done install and open the revamped viper and check the drivers status. If the drivers are properly installed then uninstall the official app. Enjoy.
If you have already installed official Viper4Droid then uninstall it first or using root explorer replace it. :laugh:
Viper Official:- http://forum.xda-developers.com/showthread.php?t=2191223
Credits :- MoKee Open Source
Testers please let me know if it worked or not.
Don't forget to press Thanks.​
Click to expand...
Click to collapse
Working fine in my moto g 2014(xt 1068) on cm13....
Working fine on broken os(6.0.1) moto g2015
Sent from my MotoG3 using XDA-Developers mobile app

[CUSTOM ROM][TWRP][A5 2016] A510F - AOSP - MKROM | Almost Pure [29/1/2017]

WARNING !!! EMERGENCY CALLS DON'T HAVE ANY UI, U CAN"T END THEM !!!
Hi,
This ROM is based on Kyubi UX, and modified by me!
I allmost come to an AOSP version of Android, the single except is Settings app, but this will change tho to stock android settings app in the close future.
This is the first ROM I share, and it's not a .zip to flash, it's a backup to SYSTEM and BOOT partition, more easy to extract for me, cuz i don't know others methods.
System UI it's not GraceUx or TouchWiz, cuz it wouldn't look as aosp. It's Good Lock, by samsung too, but it's very nice and customizable, also look as AOSP.
Here you can download the BACKUP folder: http://www.mediafire.com/?57yi1tp2ozufoh6
-> Just unrar it, and copy BACKUPS folder into your phone in TWRP folder!
If some reasons, SUPER SU say that there is no su binary, flash this: https://download.chainfire.eu/1001/S…perSU-v2.78-20
!!!! ONLY TESTED ON A510F !!!! I AM NOT RESPONSABLE FOR ANY BRIKED DEVICE!
Here you can see the ROM running, and the first step you need to do after intial setup!
Before you make any call, make sure that you set as deafult the phone app, to do that, you need to go in Settings -> Aapplication -> 3 dot menu -> Default Application -> Call -> Check Phone | If you don't do that, when you make a call, it will call but u can't see any UI and you can't end the call.
THANKS TO:
Samsung
Chainfire - Root
Kyubi ROM
OppenGapps
Tesla Coil - Free Nova Launcher Included
Is this a themed TouchWiz rom or is the base actually AOSP?
janekmuric said:
Is this a themed TouchWiz rom or is the base actually AOSP?
Click to expand...
Click to collapse
It's not theme, no galaxy apps, just google (except settings for today, i will come back with update for them)
janekmuric said:
Is this a themed TouchWiz rom or is the base actually AOSP?
Click to expand...
Click to collapse
Check the video
micudavid said:
Check the video
Click to expand...
Click to collapse
Awesome, but what is the base? And where is the source code? I think that you have to post the original source if you didn't make the rom completely by yourself, but don't quote me on that.
janekmuric said:
Awesome, but what is the base? And where is the source code? I think that you have to post the original source if you didn't make the rom completely by yourself, but don't quote me on that.
Click to expand...
Click to collapse
I don't have any sourse, i just install kyubi rom and modify it directly from phone...
Hi men , not permision for use mi base rom..
You did not intend to contact me to ask permission to use my base
Kazica said:
Hi men , not permision for use mi base rom..
You did not intend to contact me to ask permission to use my base
Click to expand...
Click to collapse
Thread reopened as permission was asked and given
Regards
Moderation Team
WOW
Interesting rom Any bugs?
Good ...
Thank you all
Phamthanh26091993 said:
Good ...
Thank you all
Click to expand...
Click to collapse
can u tell me if it work?
i have no confirmation that it works, if it works i will post an update...
if not i will delete all files cuz i dk how to make a .zip flashable...
micudavid said:
I don't have any sourse, i just install kyubi rom and modify it directly from phone...
Click to expand...
Click to collapse
Well so the title of this thread is wrong?
Hello-o
Thank you for your rom, i just have a question.
I'm curious, but how did you enable cover art album lockscreen ? What did you modify to do this ?
This is a feature i really love but Samsung disable it.
EDIT: Ok, i just saw that i didn't have this feature because i activated the custom lockscreen wallpaper in good lock, and we can't make it work both
No, it doesn't work, unfortunately
As soon as loads, it says "com.android.phone stopped" infinitely, freezing this app also doesn't help
how install?
I haven't understood how to install it. I extracted backups folder in twrp folder (system/emulated /0/twrp right?)
And now? What do i have to do?
hi
did you port Always on Display?
Can You Do that?
and blue light filter works?
Let me try to explain
Maxooo233 said:
I haven't understood how to install it. I extracted backups folder in twrp folder (system/emulated /0/twrp right?)
And now? What do i have to do?
Click to expand...
Click to collapse
In your TWRP folder there is another folder call( Back up).in that Backup folder will be another folder by default just numbers eg:3300e77aa157.....,that is where you should paste the the files after you unrar.:good:
Could you add support for switching superuser? currently the only option is SuperSU and i'd like to switch to Magisk.
So...where is the stock settings?

[APP] Ad-Free YouTube APK

Do you want a completely ad-free YouTube app? This patched APK works perfectly like a charm! I have been using this one since its initial release and haven't encountered a single ad since then. The developer has ported or made some tweak to the YouTube adAway xposed module for him to convert it into an APK file. Works on rooted device only.
MOD edit
Developer: arter97
Main Thread:
https://forum.xda-developers.com/android/apps-games/app-patched-ad-free-youtube-apks-t3449312
helandortega said:
/* INTSRUCTIONS */
1. Download the APK. (Note: Please save the file on the default 'Download' directory.
2. Download the installer. (Note: This installer is not a complete flashable zip file! You still need the APK file above to make this work.)
3. Flash the installer in your custom recovery.
Click to expand...
Click to collapse
That's it ?
I mean just download the APK and save that Apk in Download folder, should i install that apk or not?
After flashing that installer zip file via twrp recovery the apk work automatically or should i install that save apk from download folder ?
Sorry, but actually i don't understand what should i do with apk?
Please no offence.
Normas Interruptor said:
That's it ?
I mean just download the APK and save that Apk in Download folder, should i install that apk or not?
After flashing that installer zip file via twrp recovery the apk work automatically or should i install that save apk from download folder ?
Sorry, but actually i don't understand what should i do with apk?
Please no offence.
Click to expand...
Click to collapse
Yeah. As stated on the instructions, just leave the apk there because the zip installer will automatically push it into your system app, obviously.
helandortega said:
Yeah. As stated on the instructions, just leave the apk there because the zip installer will automatically push it into your system app, obviously.
Click to expand...
Click to collapse
Cool,
One more question:
Is this work with Oxygen ROM 4.0.3 also?
Thanks already added for the above reply
Normas Interruptor said:
Cool,
One more question:
Is this work with Oxygen ROM 4.0.3 also?
Thanks already added for the above reply
Click to expand...
Click to collapse
Yup, working completely fine on my end
helandortega said:
Yup, working completely fine on my end
Click to expand...
Click to collapse
Is this update automatically with the play store or should i remove the market link from titanium app ?
Tried the same as the instructions... It just removed my YouTube app instead... I'm on Experience ROM beta 11 and modified twrp... Anything wrong with my setup?
Normas Interruptor said:
Is this update automatically with the play store or should i remove the market link from titanium app ?
Click to expand...
Click to collapse
Pls dont update via play store .
shubhaemk said:
Tried the same as the instructions... It just removed my YouTube app instead... I'm on Experience ROM beta 11 and modified twrp... Anything wrong with my setup?
Click to expand...
Click to collapse
Try to reboot your device. Did you rename the downloaded apk file?
helandortega said:
Try to reboot your device. Did you rename the downloaded apk file?
Click to expand...
Click to collapse
Maybe I didn't renamed it... What should it be ? Can't see anything in OP or maybe I'm turning blind... Thanks for the efforts Dev.
shubhaemk said:
Maybe I didn't renamed it... What should it be ? Can't see anything in OP or maybe I'm turning blind... Thanks for the efforts Dev.
Click to expand...
Click to collapse
Do not rename the apk file and make sure that it is in the 'Download' folder of your device.
helandortega said:
Do not rename the apk file and make sure that it is in the 'Download' folder of your device.
Click to expand...
Click to collapse
Sorry... It was in ADM folder.
Just a suggestion, I if you know how to change the Android script from that zip, please change it to the current folder than the absolute path used. Sorry , can you make it?
Seems to be working as intended on RR 5.8.1! Thank you for sharing :laugh:
helandortega said:
/* Downloads */
APK : bit.ly/2kBwwvB
Installer : bit.ly/2l9Cu5q
^ Direct download links are provided above. I shortened the URL to save space and Im a bit OC with formatting. Don't worry, it doesn't contain any ads.
Developer: arter97
Main Thread: goo.gl/QfkK8v
Click to expand...
Click to collapse
Did you ask permission for making direct links to @arter97's work? You shouldn't probably do that - not unless you asked for permission. It's polite to point to the thread and not linking directly.
eroigaps said:
Seems to be working as intended on RR 5.8.1! Thank you for sharing :laugh:
Click to expand...
Click to collapse
Giving thanks is highly appreciated
shubhaemk said:
Sorry... It was in ADM folder.
Just a suggestion, I if you know how to change the Android script from that zip, please change it to the current folder than the absolute path used. Sorry , can you make it?
Click to expand...
Click to collapse
Will try to make this one, good idea there mate
I don't understand the purpose of this thread. It seems to me that this is just a blatant ripoff of someone else's work. Am i missing something here?
keen36 said:
I don't understand the purpose of this thread. It seems to me that this is just a blatant ripoff of someone else's work. Am i missing something here?
Click to expand...
Click to collapse
Then don't visit this thread. No one force you to do so though. I'm just sharing this one and as you could see on the OP, all the credits are still on @arter97
For me with this version cardboard mod did not work. App crashed.
Everybody, just follow the instructions, it works. @arter97 man you never cease to amaze me, since i9300 days. Thank you.
Ps I was using a certain patching app to run yt in background on nougat. After the installation of your apk, I patched it and voila, now I have yt background playback and yt adblocker xposed functionality.

Categories

Resources