OK Guys the e1 has been an absolute mare... to root or basically do anything with so heres a guide to finally root this thing and install a custom recovery WHOOO.......
OK FIRST THINGS FIRST... UNLOCK BOOT LOADER ABSOLUTE BEST WAY AND SAFEST WAY TO DO IT.........
Please note! It will only be possible to unlock the boot loader for certain releases. You can check if it is possible to unlock the boot loader of your device in the service menu by following the steps below:
In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
Tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
Go here and check whether your smartphone is on the “unlock bootloader” list or not. If your phone is not listed there it means that you cannot use this guide for unlocking the system
.
Also, on your handset type and dial: *#*#7378423#*#*; then go to “Service info -> Configuration -> Rooting Status” and check if the “Bootloader unlock allowed” says yes. If the “no” answer will be displayed then you will not be able to unlock the bootloader of your device.
Now, extract the file named “downloadinf.zip” (which has been downloaded before) on your computer.
Then, copy the obtained file (“android_winusb.inf”) to path c:\android-sdk\extras\google\usb_driver.
Click yes if asked to overwrite something.
Type *#06# on your phone and get the IMEI number; write it down as you will need it a little bit later.
Now, go here.
On the first page click on “Yes, I’m sure”.
Agree to Sony’s legal terms and then hit “I accept”.
On the next page enter your name, email and your device’s IMEI number and click on “Submit”.
An unlock code will now be offered; note it down.
Turn off your device and connect the same with the computer by pressing on the POWER BUTTON +vol down
Install the drivers on the path mentioned above (c:\android-sdk\extras\google\usb_driver).
Now, on your computer open command prompt: “start -> run -> type cmd”.
On the cmd window enter the following commands (one at a time): cd C:\android-sdk\platform-tools; fastboot.exe -i 0x0fce getvar version; fastboot.exe -i 0x0fce oem unlock 0xKEY (replace key with the code obtained before).
That’s all, now the bootloader will be unlocked.
In the end, remove the USB cable and reboot your smartphone.
NOW OK WITH BOOT LOADER UNLOCKED ............
Firmware...............
it is best to roll back via flashtool to 20.1.A.0.47 firmware its more compatible with the custom recovery ...
download firmware..https://docs.google.com/uc?id=0B1oU02TyhZkAald4OFQ5MEVMOFk&export=download
download flashtool...https://github.com/Androxyde/Flashtool/archive/master.zip
place firmware in in firmware folder in flashtool directory connect phone holding powerand vol down and flash
NOW THE HEAD ACHE ROOTING BUT STICK WITH IT AND WE'LL DO IT
download http://www.mgyun.com/en/getvroot ( ok i understand people are sceptical of this but trust me it works it wins half the battle)
it will root xperia e1 alas! you will only have limited root privleges ((and it will install 2 apps easily uninstalled))) and it will install its own su app which does work but a bit annoying soo...
you can remove this via a delete system apps app, you do have enough privelages to do this....
install root checker it will say you dont have full root priveleges but su installed ? ok dont panic
CUSTOM RECOVERY
THIS WILL GET THEM FULL ROOT PRIVELEGES WE HAVE BEEN LONGING FOR ...
OK DOWN LOAD THIS RECOVERY IMAGE ...http://forum.xda-developers.com/attachment.php?attachmentid=3036643&d=1417104506
NOW
1. extract zip to somewhere on your computer & place img in the directory of fastboot.exe
2. Connect your phone in fastboot mode press vol + button while connecting to USB
3. Flash via fastboot ON FASHTOOL note to enter fast boot mode HOLD POWER AND VOL UP BLUE LIGHT SHOULD BE SOLID...
4.REBOOT..
OK NOW FINALLY
REBOOT INTO RECOVERY ....HOLD POWER AND VOL DOWN
NOW NAVIGATE TO ...ADVANCED MENU
OK NOW GO TO RE-ROOT SYSTEM (superSU) PRESS THIS REBOOT PHONE GO TO PLAY STORE RE-INSTALL SUPER USER APP
ROOTED...........................WHOOOOOOOO ps Check this with root checker
ALL COMMENTS WELCOME ...................................
Related
I wrote this Noob manual to help others achieve the same goal: Root the Nexus One. Thanks goes out to the XDA forums for such fantastic community support. In my quest to root, was overwhelmed and confused with the various ways to do it. Should you root by unlocking the bootloader or not, should you downgrade, then upgrade, which recovery image to use, how to flash a recovery image, everything shows "superboot" bla bla bla. We all have the same questions, but this can be a pain-staking process to find the answers. Here's a short guide that may help you root the phone.
Overview of the process: A) Unlock Bootloader B) Flash Recovery Image C) Install Rom through Recovery. D) Phone now unlocked and rooted.
1) Setup adb and confirm it's working by reading your serial number.
http://forum.xda-developers.com/showthread.php?t=613217
2) Unlock bootloader (voids warranty but htc may still repair). Turn on USB debugging (may need to toggle usb debugging off to move files to sd card, then back on for adb). Reboot phone into fastboot:
Power off device and hold down trackball while powering back on. The fastboot screen is the one with the Androids on skateboards.
Open a command prompt and navigate to your Android SDK tools folder.
Type ‘fastboot devices‘ to make sure your phone is recognized.
Type ‘fastboot oem unlock‘ to unlock the bootloader.
Use volume keys to navigate to yes and press the power button to confirm.
3) Flash Aman RA Recovery in fastboot (immediately following flash, go into recovery console before rebooting or the recovery image may not show up). The stock rom will re-flash recovery during boot because of scripts. Recovery rom should be placed in adb folder. To reboot into recovery from adb type 'reboot recovery'. Copy the recovery file to your Android SDK tools folder. Open a command prompt and navigate to your Android SDK tools folder. Type ‘fastboot flash recovery recovery.img‘ (or whatever the recovery file name is).
http://forum.xda-developers.com/showthread.php?t=611829
4) While in fastboot, select "Recovery" and new Recovery screen shows up. FRF91 signed image or custom rom should be on the sd card.
Download signed FRF91 signed image for rooting (only after adb is working, the bootloader has been unlocked and recovery image successfully flashed.
5) Flash Froyo 2.2 rooted & signed update file.
(update-nexusone-FRF91-root-signed.zip)
Get it here:
www.multiupload.com/L69XPNYDWP
www.megaupload.com/?d=XD8MYCSN
If this was done correctly, your phone is now rooted.
thx for your work
but also we have a this http://forum.xda-developers.com/showthread.php?t=636795
will this method wipe my data? and is the superboot method any easier?
Thanks!
Worked like a champ! Oh and yes it will wipe all your data... I thought maybe it wouldn't since you didn't say, but it did... oh well it's all backed up in my gmail, so it'll be ok.
I have posted the instructions bellow that I have been following.
1. I got the bootloader unlocked.
2. The fastboot flash recovery went through ok
3. Is were the problem is. The instructions say after flashing the img in place
it is time to open Cynogen Mod menu and flash in the SuperSU file. The
instructions say to reboot to bootloader > boot to recovery mode then hit the
power button. At this point the Cyanogen Mod recovery mode menu is
supposed to come up. And then navigate to were the SuperSU.zip file is.
The problem is that the Cynogen Mod menu never comes up. All I get is
the following picture bellow. Then the phone reboots to normal operating mode.
The phone works 100% but it still isn't rooted. I don't know how to fix this.
The boot loader screens aren't the same as I have seen in video turtorials that I
have seen. I can post those screen captures as well if needed.
----------------------
Complete, detailed, step-by-step root procedure for HTC Desire 626s
Credits
- I did not come up with the procedure to root this phone - that work was done by member @hackvcs - I just put this guide together using the method that he developed (and using the custom recovery that he put together). Please give all credit to @hackvcs!!! Also, the links to the files below are not my links - they are links that other members provided (member who provided them is listed below).
Pre-requistes/Downloads:
- HTC Desire 626s phone
- Official TWRP Recovery Images: https://twrp.me/devices/htcdesire626s.html - Thanks @Captain_Throwback!
- Recovery images (custom CyanogenMod recovery and stock recovery image) - provided by @hackvcs (https://mega.nz/#!sp0wCThZ!MQVTq6y_8...hnaLRq8UiqLruQ)
-SuperSU binary .zip file - link provided by @mussio (https://download.chainfire.eu/696/SuperSU)
1. Unlock bootloader
- Enable "Unknown Sources" on your phone:
- Settings->Security: Check "Unknown Sources" checkbox
- Enable "Developer Mode" and enable "USB Debugging" and "OEM Unlocking" settings
- Settings->About->Software Information->More: Tap on "Build Number" 7 or more times until it tells you that Developer Mode is enabled.
- Settings->Developer Options: Enable "OEM Unlocking" and "USB Debugging" options.
- Actually unlock the bootloader by going to the HTCdev "Unlock Bootloader" website (www.htcdev.com/bootloader) and following the directions to unlock your bootloader. You will need to create an account on this website before being able to unlock the bootloader. I'm not going to provide step-by-step instructions for the bootloader unlock procedure since the HTCdev website already provides a step-by-step procedure. However, here are a few key notes regarding this procedure:
- The bootloader unlock procedure will reset your phone back to factory defaults. Make sure to backup anything that you need on the phone before unlocking the bootloader. You can optionally install the "HTC Sync Manager" (link provided on HTCdev website) to backup your phone before starting the process.
- In the "Select your device" box on the first screen of the bootloader unlock procedure, select "HTC Desire *" as the device type.
-If you are running the latest firmware on your phone, you do not need to worry about the phone update page when you first start the unlock process - just scroll to the bottom of the screen and click the "Proceed to Step 1" button to start the procedure.
- You will need to install Java if you don't already have it installed - there is a link to download Java right on the same page as the bootloader unlock procedure.
- You will need to download and install the fastboot binaries provided in step 4 of the bootloader unlock procedure. Unzip the fastboot.exe file included in the zip to a directory that you will use to root your HTC Desire 626s (I recommend creating a new directory for this - something like "C:\HTC626s") - later, you will also put the other files you need (recovery image file and SuperSU binary .zip file) into this same directory so that everything is in one place
2. Install custom recovery
Once you have successfully unlocked your bootloader, you will need to flash a custom recovery (TWRP recommended). This recovery image will replace the stock recovery on your phone and allow to flash the SuperSU binaries in the next step.
- Connect your phone to the PC via USB cable and let the PC install the necessary drivers for the phone.
- Power off phone
- Reboot the phone into "Download" mode:
- While holding the Volume Down button, press the device Power button. Continue to hold the Volume Down button until the phone boots into "Download" mode. To confirm that the bootloader is unlocked and that you are in "Download" mode, you should see the following two lines at the top of the screen:
- "hTC download mode"
- "*** Unlocked ***"
- Once you have confirmed that you are in download mode and the bootloader is unlocked, it's time to flash the custom recovery:
- Open a Command Prompt (aka DOS prompt) window and change to the directory where you put the fastboot.exe file. If using the recommended directory, you would type this command in the Command Prompt window to change to that directory:
- Type "cd \HTC626s" and press [ENTER]
- Make sure that the recovery file is in the same directory (type "DIR" and press [ENTER] to see the files in the current directory). If it is not in the current directory, put it there before continuing (via Windows Explorer). Also, I'd recommend renaming the recovery image to "recovery.img" - it makes typing the commands a little easier and reduces the likleyhood of a typo. So before continuing, you should have both "fastboot.exe" and "recovery.img" in the current directory.
-In the command prompt window, type "fastboot flash recovery recovery.img" and press [ENTER] - this will flash the custom recovery to your device.
3. Install SuperSU superuser binaries
Now that we have the bootloader unlocked and the CyanogenMod recovery installed, we are set to flash the SuperSU binaries to actually root the device. Before continuing, make sure that you have copied the SuperSU binary .zip file to the internal storage on your phone! Once we boot into CyanogenMod, you will have to navigate to this .zip file in order to install it. It MUST be on the *internal* phone storage (not on the MicroSD card).
- Reboot your phone into recovery:
- Power off the phone
- Power on the phone while holding the "Volume Down" button. Keep holding "Volume Down" until the phone boots into Download mode.
- Scroll down to "Reboot to bootloader" and press the power button.
- Once in bootloader mode, scroll down to "Boot to recovery mode" and press the power button. At this point, you should be in the CyanogenMod recovery menu.
- Scroll down to "Apply Update" and press the power button
- Scroll down to "Choose from internal storage" and press the power button
- Navigate to where you stored the SuperSU .zip file and select it - the SuperSU binaries will be installed on the phone.
-That should do it! You should now have a rooted HTC Desire 626s. Reboot the phone into Android and confirm that you have a SuperSU icon in your app drawer and then confirm that the device is actually rooted.
Disclaimer:
You device’s warranty may be void after following below mentioned instructions. If any thing goes wrong and you end up with a bricked or semi-bricked device then neither our site or any of these app developers will be responsible. So, try these instructions at your own risk.
Work For
Zenfone laser 5.5/5.5s/6
Prerequisite for rooting Zenfone 2 Laser:
Additionally, you must have a windows PC.
Install USB drivers for your Asus Zenfone 2 Laser.
Goto Settings -> About and tap multiple times continuously on “Build number” to active “Developer options” and then goto Settings -> Developer options and enable “Usb debugging” option.
Download Rooting Tools:
-Minimal adb fastboot tool
https://devs-lab.com/download-minimal-adb-fastboot-tool.html
-Adb Drivers
http://dl.adbdriver.com/upload/adbdriver.zip
-TWRP
https://dl.twrp.me/Z00L/twrp-3.0.2-4-Z00L.img.html
https://dl.twrp.me/Z00T/twrp-3.0.2-4-Z00T.img.html
-SuperSu
https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.78-201609011115.zip
-Bootloader Unlocker
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE601KL/UnlockTool_ASUS_AndroidM_USER.apk
How to unlock Bootloader & Root Asus Zenfone 2 Laser :
1.Download all the above tools & transfer all the Apk files in your device.
2. Now Install Bootloaderunlocker.apk in Your Device.
3. open bootloaderunlocker and follow on screen instructions.
4. Extra ‘ADB Fastboot Tool.rar’
How to Install TWRP Recovery in Zenfone 2 Laser
1. On your pc install adb drivers and open the application, connect your zenfone to your pc, in adb driver it will show if the driver are installed or not, if not just click install and wait for it to finish installing.
2. Move twrp.img into extracted ‘ADB Fastboot Tool.rar’ folder.
3. Now in ADB Fastboot folder open command windows by Pressing Shift+Right click –> open command winnows here.
4. Now Enter the Following command in Command Window.
adb devices
It will return your device code which confirms you have installed all the files properly.
5. Now to reboot your device into Fastboot mode which allows flashing files, enter the below command in command prompt. or else you can Manually Reboot To Fastboot Mode By Switching off Your Phone And Press Volume Up + Power Key Together.
adb reboot bootloader
5. Now to flash the TWRP recovery, just enter the below command.
For ZOOL devices
fastboot flash recovery twrp-3.0.2-4-Z00L.img
For ZOOT devices
Fastboot flash recovery twrp-3.0.2-4-Z00T.img
IF YOU WANT TO ROOT YOUR STOCK MARSHMALLOW JUST FLASH SUPERSU.ZIP PROVIDED ABOVE.
NOTE: If you want to flash cm13/cm14.1/rr or any customized rom do an advance wipe in twrp.(Reboot To Twrp Mode By Switching off Your Phone And Press Volume down + Power Key Together. on twrp choose wipe/advance and mark the following system, data, cache, and dalvik cache.
оО
i didn't know that there is app unlocking bootloader for marshmallow
Not work for me.
I installed the bootloader unlock app and tried to unlock
but it failed and says 'an unknown error occurs which maybe a network connection issue'.But my wifi is working correctly. Please help me to unlock my bootloader. I really need to unlock my bootloader because I don't want to stay in stock rom anymore.
How To Unlock Bootloader And Flash Twrp Without Pc ?
Hey i wanna know how to flash twrp and unlock bootloader cause I'm using stock marshmallow and i dont have pc and i dont know how todo it please help
Everytime I have to unlock,flash recovery and root I can't remember how to do it....
So I'm writing this very easy guide.
This was a fiddly little phone to root!!!
First off get the One Mini 2 drivers from here:
http://www.htc.com/uk/software/htc-sync-manager/
I personally cannot stand HTC Sync, it's totally pointless but it does contain all the drivers, if you can extract just the drivers then do...
Download Android SDK Slim from here:
https://mega.nz/#!8tETTbga!iVOYHGwT7...PNuQCrX6zJxpwQ
Unzip it anywhere you like, desktop's easy but it can be anywhere...
Go to https://www.htcdev.com log in click on Get Started then Unlock Bootloader and choose One Mini 2 from the dropdown.
Click Yes and Tick the two boxes for all the legal stuff.
Now go into your One Mini 2 Phone Developer Settings and switch on USB debugging.
Next go to Power settings and switch off Fast boot.
Then connect the phone to your PC via USB cable.
Allow your PC to recognise it and download any stuff it wants to.....
Go make a cup of Tea while this is happening.
Next go to your SDK folder, wherever you ended up putting it, click through to the Platform Tools folder where you will see ADB and Fastboot.
Hold down Shift and Right Click anywhere in the folder, choose Open Command Window Here.
In Command Window Type: adb reboot bootloader
Your Phone will boot into Bootloader
Keep the Command Window open...from now until the very end!!
That has just skipped all the 4 Steps on the HTC Dev site!!!
Proceed to Step 5
Now in the Command Windows Type: fastboot oem get_identifier_token
You will see a long block of text. Copy and paste this text into the the token field on the HTC Dev site. Right Click choose Mark and highlight the square bit of code then press Enter to copy.
Paste that into the My Device Identifier Token
HTC will email you a little Unlock_code.bin file within seconds (Check your Junk folder)
Then copy or move the token to the Platform Tools folder.
Back to your Command Window which should still be open!!
Type: fastboot flash unlocktoken Unlock_code.bin
Now follow the instructions on the Phone....
The phone will Unlock the bootloader....
And Reboot your phone....
You need to go back to settings and switch on USB Debugging and switch off Fastboot (See start of tutorial)
Make sure you are still plugged into your PC
In Command Window Type: adb reboot bootloader and your phone will go back into the Bootloader screen.
Next go here: https://forum.xda-developers.com/on...recovery-twrp-3-0-2-0-unofficial-htc-t3555343
Download this TWRP
Place that file in the Platform Tools folder
Then in Command Window type: fastboot flash recovery twrp_3.0.2-0_v0.1.img
This will install your TWRP Recovery!!!
This bit took me a day to sort out... You need to install SuperuserSU but you can't do it using the TWRP "Do you want to install SuperuserSU" method...
The easiest way I found was to Reboot your phone normally into the OS.
Go to Google Play and download ESFile Explorer
Then in a browser go here: http://www.supersu.com/download and download the Recovery V2.79 Flashable.zip don't be tempted to use the 2.8 version...yet!
Now you have the SuperuserSU in downloads...
Boot into Recovery and in TWRP press Install and find the Download folder, then open that to find Recovery V2.79 Flashable.zip.
Select that and swipe to install....voila!!!
Reboot your phone into the OS
From there open the Super SU app and update your Super User Binaries...
And that's how to Unlock the Bootloader, Install TWRP Recovery and Root....
EASY!!!!
:silly::silly::silly:
If you want to S-Off you can only do it using Sunshine and you have to relock bootloader!!!
To relock bootloader connect phone to PC with USB Debugging switched on and Power/Fast boot switched off.......right click holding shift in platform tools click on open command window here...
Type: adb reboot bootloader
Once in Bootloader...
Type: fastboot oem lock
EASY!!!!
:silly::silly::silly:
ROOT Vibe K5 Note LP or MM
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired.
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device/software.
* Same statement for XDA.
*/
Finally I got the method to root Lenovo Vibe K5 Note/A7020a48. If you are the one who is tired of searching how to root your device then you are at right place
But before we get started here are the things that you need (only for marshmallow user, lollipop user need only 1 thing which is given in method section)
Requirements
1. Your Device (of course)
2. Your Current Stock Rom's Firmware(You can easily get it in firmwarefile.com)
3. A Working PC (first check whether you can successfully connect your device to your pc or not)
4. ADB and Fastboot Tools
5. A working Brain
BONUS:-You can use this method to root any (5.1+) device (if it has general unlocking system, This method is supported by 95% devices).
Now It's Time To Rock
METHOD for Lollipop users
Download and install kingroot, open it and follow the tutorial given in that app
METHOD for Marshmallow Users
1. Make complete backup of your data, Everything except ext. storage of your device will be erased.
Now Follow the steps from 2 to 11 to unlock bootloader (you can skip it if you already unlocked it)
2. Go to your phone settings>About phone, tap on build no. 7 times and then go back you will see a new { } developer option just above the about phone option
3. Go to developer option and enable OEM unlocking and USB Debugging
4. Connect your device to your pc and install adb and fastboot tool system wide
5. Open command prompt or power shell
Note- Windows 10 users have to write .\ as prefix before every command.
6. Type
Code:
adb devices
You will see a prompt on device, just click on always allow this computer and press ok or allow whatever given there. You will see your a long set of random Numbers and letters after that if its written device then your phone is successfully connected to your pc.
7. After that type
Code:
adb reboot bootloader
Your phone will reboot into bootloader mode
8.Type
Code:
fastboot getvar all
There you see at last some lines which tells you about your bootloader status if you see Unlocked = no then your bootloader is locked and if it says Unlocked = yes then it is unlocked and if it is unlocked then you can stop here
Now for those who has a locked bootloader
9. Type
Code:
fastboot oem unlock
(In some devices which is shipped with android 6.0 or higher you may have to write fastboot flash unlock don't write this command for your Vibe K5 note/A7020a48)
10. Most Important step Type
Code:
fastboot format userdata
. If you skip this you may get bootloop (I skipped that and got bootloop)
11. Type again
Code:
fastboot getvar all
Now you will see Unlocked=yes and Congrats!!! you has unlocked your phone's bootloader
12. Disconnect your device and press and hold power button until it reboots
Now follow the steps to root your device
13. Now from your stock firmware file extract boot.img which is given in the folder named firmware and copy it any where in your device
14. Install magisk manager from here -> Official website
15. After opening the app you'll see it is written that Magisk not installed click on the install button and select patch boot.img option,
16. Now select your boot.img file which you have extracted from your firmware file. After selection it will start to patch that boot.img and store patched_boot.img file in download folder of your device internal storage, copy that file at any folder in your pc (not in desktop)
17. Now go to the folder where you copied that patched_boot.img file and press right click on your mouse while holding shift button of your keyboard (Shift + Right click in simple words) and you will see an additional option of open command window/powershell here click on that and connect your device with your pc.
18. Before getting started with commands follow step 2 and 3 again
19. Repeat step 6 and 7
20. After going into bootloader mode Type
Code:
fastboot flash boot patched_boot.img
(in this code boot is partition and patched_boot.img is file name which you are going to flash).
21. Disconnect your phone ,press and hold powerkey until it reboots
Congrats Device ROOTED!!!
#reserved
But there's a much simpler method to get root access with a single click. i cant able to attach photos.
did not work
Shubham1815 said:
#reserved
Click to expand...
Click to collapse
bro after entering the cmd fastboot oem unlock my lenovo vibe k5note displayed
fastboot mode
unlock not allowed
now what should i do ......plz help
Tried but not work for MM. The bootloader cannot be unlocked. Maybe your bootloader is different from the others, would you share it out?
mihir999 said:
bro after entering the cmd fastboot oem unlock my lenovo vibe k5note displayed
fastboot mode
unlock not allowed
now what should i do ......plz help
Click to expand...
Click to collapse
Do you enabled allow oem unlocking?
Shubham1815 said:
Do you enabled allow oem unlocking?
Click to expand...
Click to collapse
I enabled oem unlocking but still it shows "unlock not allowed"
Does this really works?? I want to try it
Did you actually unlock bootloader and root the device ? As far I know, in all other threads, none has confirmed any method.
After "fastboot getvar all" command, nothing happens. (PC => waiting for device.. PHONE => stuck at "Fastbood Mode"text)
Same for "fastboot oem unlock" command
I really want to permanent root for => LENOVO K5 NOTE (a7020a48). Years gone but no luck !
If your method is true then please answer us :crying:
Got stuck at "Unsupportive project for unlock" on my vibe K5note. Any help here please?
so . for those who are stuck at fast boot try and install the driver from this link :
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
this didn't work for me and i had to download and install "rescue and smart assistant" from the lenovo website
Rescue and Smart Assistant (RSA) - Lenovo Support AU
support.lenovo.com
once downloaded and installed , i could update the "Android" driver from device manager --> selecting the moto interface (not the composite one) instead the google one ( step by step : youtube.com/watch?v=nQjg6ePnGAc )
Once that's done , reboot to fastboot via adb
Now when I type fastboot devices I can finally see my device
however... i was getting " (bootloader) Unsupportive project for unlock "
no luck . . .
Edit:
if you however do have an OTG cable maybe try this method :
GitHub - BiltuDas1/unlock-Bootloader: Unlock Bootloader of any Device using PC or Android.
Unlock Bootloader of any Device using PC or Android. - GitHub - BiltuDas1/unlock-Bootloader: Unlock Bootloader of any Device using PC or Android.
github.com
good luck
any luck guys!?!?! or should i completey give up )