Build 21 Download: MEGA | XDA
This is supposed to be the last build of CM12.1, as whole CM development moved to CM13.0. You should not expect any further builds, support, or CM13.0 from me.
Questions? Use Q&A!
Suggested GAPPS
Other GAPPS
Changelog:
Build 21
- Updated sources
Build 20
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 19
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 18
- Audio related fixes mostly
- Reverted boost to speaker & headphones, as it wasn't needed and caused disortions
- Fixed broken AIF2 logic, earpiece speaker should now be much louder and with less disortions (Dhiru broke it )
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 17
- Misc audio corrections (+3db boost)
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 16
- Enabled kCollectorTypeHSpaceCompact for ART
- Changed malloc implementation to dlmalloc
# Both of above changes should greatly improve memory management and cut memory usage on low-memory devices
# Thanks to arter97 for finding them out and suggesting to use in i9300
- Disabled ZRAM by default
- Implemented dex-preoptimization for ART
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 15
- [KERNEL] Added workaround for bluetooth deadlocks found in AOSP Lollipops
- [KERNEL] Added a possibility to change wi-fi MAC address (thanks to siracuervo)
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 14
- Fallback to B13 DRM blobs to fix chromecast
- Misc HWC improvements/fixes
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 13
- One more try on fixing Netflix (changed DRM blobs)
- I decided to go back to closed-source sensors, as open-source ones still didn't satisfy me in terms of stability
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
Build 12
- Went back to closed-source sensors, as open-source ones aren't working completely perfect yet
- Fixed netflix, it should work properly now
- Updated sources
Build 11
- Increased earpiece volume slightly, as it was barely heard outdoor
- Fixed SELinux derps introduced in B10 (sysfs denials)
- Fixed more SELinux denials related to recently changed parts (open-source sensors & bluetooth)
- KERNEL: Fixed dm-crypt not accepting discard requests which resulted in failed encryption (CM10.2 regression)
- Updated sources
Build 10
- Fixed (compass) and reintroduced open-source sensors
- Misc SELinux updates
- Misc hwcomposer fixes and improvements
- Updated sources
- Android 5.1.1 revision 6 (LMY48G)
- Probably other things that I forgot already
Build 9
- Our CM sources have been rebased and resynced to fix derps and other misc issues
- Fixed most (if not all) hardware encoder/decoder issues
- Improved stability, compatibility, battery life and performance drastically while encoding/decoding movies
- hwcomposer improvements and fixes
- Wi-Fi firmware updates & cleanup
- Updated sources
Build 7
- Fixed mobile networks search (for good this time)
- Various kernel cleanups & stability improvements
- Added proper touchkey backlight support. They don't light up on screen touch anymore (stock behaviour)
- Hopefully fixed Wi-Fi dropouts during night
- Updated sources
Build 6
- Fixed mobile networks search
- Various kernel cleanups & stability improvements
- Updated sources
Build 5
- Kernel: Various improvements, zRAM should be more responsive now.
- RIL: Fixed & Updated Exynos4RIL java class, long shutdown issue resolved
- Updated sources
Build 4
- Android 5.1.1
- Kernel: Changed version type to -CM-ArchiKernel-base, hope you won't mix it up with AK now
- Kernel: Does not include BFQ anymore, CFQ is default.
- Updated sources
Build 3
- Major updates to RIL (again)
- ArchiKernel: Haptic: Made get() and store() consistent
- Updated sources
Build 2
- Major updates to RIL client (V11)
- Updated i9300 RIL header (V11)
- Major updates to RIL blobs (XXUGOA2)
- Network settings FC fixed
- MMSes fixed
- Sensors fixes
- Added vibration intensity to stock kernel
- Updated sources
Build 1
- Initial release
- Everything what worked in CM12.0 should work, too
- Fast overview: HWC, RIL, Wi-FI, RIL, Sensors, Camera are fine, rest is untested
- MMSes not yet fixed (known bug from CM12.0)
Background:
Due to lack of official maintainer for i9300 device for CyanogenMod. I, together with @Moster2 decided that we will work unofficially on i9300 device tree for CM12, to bring Lollipop goodness to our beloved Galaxy S3.
All builds provided in this thread are UNOFFICIAL, which means that:
- There is no official support for i9300
- There are no OTAs available
- There are no automated "nightglies"
At some point, we definitely will try to make proper pull requests, and maybe even support CM12 officially, but at the moment this project is in WIP - Work-In-Progress state, and many things are still broken/unusable. Until we finish, all builds are unofficial, and proper device support is not finished yet.
At the moment, this project is considered: BETA. All core functions should work, ROM shouldn't have any critical issues, but it's still not ready to mark as stable. However, it should work properly as daily driver.
Please refrain from talking about other kernels than stock. We can't track every kernel and it's problems, hence, you're using other kernels at your own risk. Please don't report bugs while you're using custom kernels.
Main developers:
- JustArchi
Thanks to:
- Moster2
- dhiru1602
- arter97
Current issues
Manifest / Sources
We work on this project for FREE. While not mandatory, donations encourage us to continue to do so, and we'd deeply appreciate them, if you feel generous.
Donate to JustArchi
Build instructions:
Follow CM build instructions for i9300. When doing repo init, don't forget to declare CM-12.1 branch (-b cm-12.1) instead of the default one.
Before "breakfast i9300", you must include our manifest and resync the sources:
Code:
croot
cd .repo
mkdir -p local_manifests
cd local_manifests
wget https://raw.githubusercontent.com/ArchiDroid/manifest/cm-12.1/roomservice.xml
croot
repo sync
Notice: Our manifest already includes proprietary_vendor_samsung, so don't execute ./extract-files.sh. Just repo sync.
Then follow "breakfast i9300" and the rest of the commands in original instructions, while keeping in mind above notice.
XDA:DevDB Information
[EOL] [5.1.1] [Build 21] [BETA] [2015-11-06] CyanogenMod 12.1 for i9300, ROM for the Samsung Galaxy S III I9300
Contributors
JustArchi, Moster2, arter97
Source Code: https://github.com/ArchiDroid
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod 12.1
Version Information
Status: No Longer Updated
Created 2015-03-29
Last Updated 2015-11-06
Reserved
If you want to thank me, Moster2, arter, Dhiru, or anybody else for what you received, consider donating, even small amount such as 1$ shows that you appreciate our time and knowledge put into those things. You're using devices worth 500x more than that, giving that money to companies like Samsung who don't care about you and your S3 anymore, consider supporting things you use and like.
That's it folks, hope you enjoyed our CM. As there is nobody from "my" team working on i9300 anymore, eventual hope for M for i9300 should go directly to Dhiru, perhaps also Haxynox guys, if they know what they're doing. I'll probably use my i9300 for a while longer, then finally change it to something else in future. You can still follow me on twitter for updates.
Good luck in this new project
I will, indeed
Here we go again,back to my favorite alpha stage,brings many good memory hh
Btw using arter97 builds for few hours and no problem, as been said last few days smoothness of the 5.1 can clearly be seen between 5.0.2 vs 5.1 lags is pretty much gone and ram management is way better on 5.1
sent from my 5.1
Great news!
There are issues with the bluetooth?
eskorpiao112 said:
There are issues with the bluetooth?
Click to expand...
Click to collapse
For me yes, listen music starts OK, than audio comes and goes until crash and reboot
After using for a few days this is my simplified report.
1. package installer FCs when installing or updating from third party (app gets installed)
2. Music volume very low and music app gets killed a few minutes after screen off
3. Settings FCs when changing status bar toggles
4. Very smooth. Alot better than 5.0 (Memory leaks fixes by Google kicks in?)
5. App info graphical error (Package name overlaps with version)
Devs @JustArchi @Moster2 @arter97 @dhiru1602 all of you are unstoppable.
Salute go on?
Video decoder working in this ROM???
[email protected] said:
Video decoder working in this ROM???
Click to expand...
Click to collapse
Yup it is working....
Only problem is when I seek the video to any other position then it already is in, the video gets stuck......(only happens when streaming online though)....
---------- Post added at 12:40 PM ---------- Previous post was at 12:26 PM ----------
Camera stops working frequently due to 'can't to connect to camera' error.....A reboot fixes it though...
And the phone overheats frequently....
Waiting for the next build
Edit:- MTP and mobile hotspot are not working.......
How to install (How it works for me):
- starting with 12.0 weekly 7
- Recovery
- wipe everything (Data/dalvik/chache/system)
- install 12.1
- wipe dalvik
- reboot
- skip all settings then reboot into recovery
- flash 5.1 minimal gapp and reboot
(http://forum.xda-developers.com/andr...ition-t2943330) link does not work...search for minimal gapps 5.1
(my Version was : gapps-5.1.x-20150324-minimal-edition-signed.zip)
-installed the bloatware removal script
(https://www.androidfilehost.com/?fid=95916177934545546)
- reboot
--> fast and smooth
Fixed Bugs/Problems
- Messenger crash ( fix with installation of textra --> play store)
- camera does not work (fix with installation of Kamera Zoom FX -->play store)
- Clock alarm crash and packageinstaller crash --> http://forum.xda-developers.com/showpost.php?p=59702454&postcount=10583
- mobile settings FC of com.android.phone --> use airplane mode, change, then back to online, works
Open bugs/problems
- encryption does not work
( try to solve it with this http://forum.cyanogenmod.org/topic/8...splash-screen/
... does not work, but it avoids to stuck in broken recovery)
Update 7.4.:
- install weekly 5.1 from justarchie with recovery
- wipe dalvik/cache
- reboot
- fine
- Thanks again to the devs
-
My test environments:
- GT-I9300
- ROM: 12.1 weekly from justarchie
- Baseband: i9300XXUGNA8
- Kernel: archiekernel 3.0.31 CM
- Recovery: TWRP openrecovery-twrp-2.8.5.0-i9300.tar http://twrp.me/site/update/2015/02/1...-released.html (newer is available)
Whoa, the way how this rom works is awesome!!! I dont have lags, its working like windows phone :3.. But one big bug for me. Rom do not detect sim card.
Devs you are unstoppable! ? thank a lot! :good
Awesome rom
Thanks...will be test
shephart said:
But one big bug for me. Rom do not detect sim card.
Click to expand...
Click to collapse
My sim card works fine. Did a clean install without wiping internal storage.
flopponator said:
My sim card works fine. Did a clean install without wiping internal storage.
Click to expand...
Click to collapse
Same here,clean wipe and everything works except for knows bugs
sent from my 5.1
boeffla kernel works in this rom?
I've tried once, but got into a bootloop. I haven't tried it again, yet...
Sent from my GT-I9300 using XDA Free mobile app
Related
This project is no longer updated, and has been deprecated by [url=http://forum.xda-developers.com/galaxy-s3/development/5-1-x-cyanogenmod-12-1-t3066864]CM12.1[/URL]
Weekly 10 Download (Mega)
Alternative Download via Google Drive
Alternative Download via 4shared
Alternative Download via Dev-Host
Alternative Download via Androidfilehost
MD5: 32b8b85205bb0f78fae710624a32d1da
SHA1: 040bfe316dda94a260bbece3301639fb55318d30
Unofficial nightly builds by [URL="http://forum.xda-developers.com/member.php?u=4898097"]@arter97 [/URL]
Changelog:
Changelog 01.04.2015
- Special April Fools' Edition
- Selinux updates
- CM sources updated
Changelog 23.03.2015
- Selinux rules updated for gps and other small things
- Activated battery percentage drawing in LPM mode (power off charging) again
- CM sources updated
Changelog 16.03.2015
- Kernel: selinux activated and set to enforcing
- Selinux rules updated for lollipop
- hardware/samsung: IntraRefreshMode support (needed for wifi direct)
- Updates to hwcomposer by NamelessRom (includes fix for mouse cursor not showing up)
- Wifi p2p fixed
- Memory management improvements (reverted kitkat lmk values)
- CM sources updated
Changelog 02.03.2015
- Kernel: powersave governor activated
- USB OTG enabled again
- Default file permissions of lowmemorykiller sysfs files reverted to pre lollipop values (664 and not 220)
- audio hal updates (removed deprecated method)
- Updated CM sources
Changelog 23.02.2015
- Advanced Display with HSDPA/3G only switch
- Screen pinning works with hardware buttons (hold menu button to disable it)
- Updated CM sources
Changelog 18.02.2015
- Kernel: Disabled zwap/vnswap, enabled zram with lz4 compression
- Zram: 4 devices, 600MB, swappiness - 80
- Fixed flashlight toggle (frameworks_base)
- Noise suppression setting added (frameworks_base, services telephony/telecomm)
- Added keydisabler - allows usage of the nav bar (hardware_samsung)
- Bootanimation memory leak fix by arter97
- Updated CM sources
Changelog 09.02.2015
- Kernel: Fix hardware key backlight
- Wifi tethering enabled (untested)
- Wifi display enabled (untested)
- Performance profiles added
- USB-charging mode added
- Updated CM sources
Changelog 02.02.2015
- Some kernel updates + config changes (API to log wakeup reason, reverted wifi updates..)
- Camera: Fix crashes when switching between front and back camera + reduced log spam
- Smdk4412: device specific flags fixed (cache size, etc.)
- Updated CM sources
Changelog 30.01.2015
- Fix incall mute
- Fix light sensor
- Bring back audio updates
- Updated CM sources
Changelog 26.01.2015
- Kernel: Zswap - version from samsung sources, not upstreamed
- Power Off Charging fixed (100% now shows green LED)
- Updated CM sources
Changelog 22.01.2015
- Kernel: Zswap activated (set to 250MB via ramdisk)
- Moving apps to sd should be fixed
- Updated CM sources
Changelog 17.01.2015
- Fixed playback of low quality videos, e.g. in youtube app
- Netflix completely working
- A2DP: only 44.1kHz (might fix issues that people have with audio via bluetooth)
- Updated CM sources
Changelog 16.01.2015
- Kernel: selinux activated (set to permissive, no active rules yet)
- Netflix working (see remark)
- Different 2g/3g data fix (might fix issues that a small amount of users experience)
- Updated CM sources (theme engine, notification drawer customisation...)
Changelog 10.01.2015
- Updated DRM libs
- Awesome player as default
- Added Adaptive Playback to video codecs
- A2DP: 44.1 and 48 kHz supported
- Fixed long sms not sending bug
- Updated CM sources
Changelog 07.01.2015
- 720p recording for front camera
- activated SMSC settings in sms/mms app
- latest memory leak fixes
- Updated CM sources
Changelog 04.01.2015
- Wifi Updates from i9305 kernel drop @DerTeufel1980
- CMA activated again
- Updated CM sources
Changelog 30.12.2014
- Fix Touchkey Backlight
Changelog 29.12.2014
- Revert audio updates (might fix audio issues that some people reported)
- Kitkat LMK values
- Updated CM sources
Changelog 24.12.2014
- HWcomposer fixed (credits to dhiru1602 and tdcfpp)
- Hardware Keys Overlay adjusted to new cm commits
- Audio Policy: use 48kHz for a2dp (potentially fixes a2dp lags)
- Power off charging should work
Changelog 22.12.2014
- Android 5.0.2
- Updated CM Sources
- Fixed Wifi issues
- RIL completely working
- Stock Camera working
- Bootloop Issues fixed
Background:
Due to lack of official maintainer for i9300 device for CyanogenMod. I, together with @Moster2 decided that we will work unofficially on i9300 device tree for CM12, to bring Lollipop goodness to our beloved Galaxy S3.
All builds provided in this thread are UNOFFICIAL, which means that:
- There is no official support for i9300
- There are no OTAs available
- There are no automated "nightglies"
At some point, we definitely will try to make proper pull requests, and maybe even support CM12 officially, but at the moment this project is in WIP - Work-In-Progress state, and many things are still broken/unusable. Until we finish, all builds are unofficial, and proper device support is not finished yet.
At the moment, this project is considered: BETA. All core functions should work, ROM shouldn't have any critical issues, but it's still not ready to mark as stable. However, it should work properly as daily driver.
Please refrain from talking about other kernels than stock. We can't track every kernel and it's problems, hence, you're using other kernels at your own risk. Please don't report bugs while you're using custom kernels.
Main developers:
- JustArchi
- Moster2
Thanks to:
- dhiru1602
- arter97
Current issues
Manifest / Sources
Build instructions:
Follow CM build instructions for i9300. When doing repo init, don't forget to declare CM-12.0 (-b cm-12.0) instead of CM-11.0.
Before "breakfast i9300", you must include our manifest and resync the sources:
Code:
croot
cd .repo
mkdir -p local_manifests
cd local_manifests
wget https://raw.githubusercontent.com/ArchiDroid/manifest/cm-12.0/roomservice.xml
croot
repo sync
Notice: Our manifest already includes proprietary_vendor_samsung, so don't execute ./extract-files.sh. Just repo sync.
Then follow "breakfast i9300" and the rest of the commands in original instructions, while keeping in mind above notice.
XDA:DevDB Information
[5.0.2] [EOL] [Weekly 10/Nightly] [2015-04-01] CyanogenMod 12 for i9300, ROM for the Samsung Galaxy S III I9300
Contributors
JustArchi, Moster2, arter97
Source Code: https://github.com/ArchiDroid
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod 12
Version Information
Status: No Longer Updated
Created 2014-11-12
Last Updated 2015-04-06
You're unstoppable, aren't you?
Well, it doesn't work. But anyway, nice black screen. I fear the next posts from some users
However, thank you bro!
Dude,you are awesome
LegendM said:
Dude,you are awesome
Click to expand...
Click to collapse
It's 7:14 AM and I'm going to sleep.
Hope we can get this baby running in notime .
Good night.
JustArchi said:
It's 7:14 AM and I'm going to sleep.
Hope we can get this baby running in notime .
Good night.
Click to expand...
Click to collapse
Thanks for making it happen
Cm12 is actually not even ready. I didnt know you would already publish a build with my commits
They were only there to make it compile. So, people shouldnt install it yet.
Wow, that was quick. I will give it a shoot and collect some logs when I am back home.
Thanks for your awesome works @JustArchi.
android L or Kitkat ?
mutaman said:
android L or Kitkat ?
Click to expand...
Click to collapse
CM12 = lollipop
S1ay3r666 said:
CM12 = lollipop
Click to expand...
Click to collapse
good but what does he mean DOES NOT WORK
mutaman said:
good but what does he mean DOES NOT WORK
Click to expand...
Click to collapse
He thought it will boot up but it doesn´t.
But i read in twitter that arter97 changed the gralloc and it booted up
S1ay3r666 said:
He thought it will boot up but it doesn´t.
But i read in twitter that arter97 changed the gralloc and it booted up
Click to expand...
Click to collapse
I think arter meant that with his build
also y'all need chin chin,(graphic glitches only in screenshots)
This is WAY better than my AOSP build
Yup, @JustArchi is unstoppable!
I look forward in cooperating with this project
---------- Post added at 07:15 PM ---------- Previous post was at 07:05 PM ----------
For those who are dying to try this out, just install my kernel after this cm-12 installation.
Already so much better than my build lol
I guess @JustArchi and @Moster2 is not done with the kernel-side..
Lukijs said:
I think arter meant that with his build
also y'all need chin chin,(graphic glitches only in screenshots)
Click to expand...
Click to collapse
Whats is working on that build?
how can i flash it .
my phone will not start
eskorpiao112 said:
Whats is working on that build?
Click to expand...
Click to collapse
Well most important, wifi and data isnt, gapps were bootlooping me too(though no use of them if there's no wifi) otherwise it functions good.
Would be nice if we could get @temasek in here as well...
mutaman said:
how can i flash it .
my phone will not start
Click to expand...
Click to collapse
and thats what happens when you dont read OP and also comments
Lukijs said:
and thats what happens when you dont read OP and also comments
Click to expand...
Click to collapse
I do not understand very much English what does he mean @Lukijs
Well according to arter97's twitter,
wifi and radio are almost fixed
and so is hwc and gralloc.
Almost daily driver Lollipops are on their way, 'beaches'! :highfive:
Donating soon!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
STATUS: DEV STOPPED, check cm-12.1 thread
This is a preview build, do not install it if you want a stable ROM.
This is a preview of what is going down on CM12.0
Rom is in beta state so many bugs are to be expected!
All the source code is available on my Github.
I do this on my free time and unfortunately I don't have much.
Any help is a appreciated!
I don't own N8000 device, so all RIL is untested, some may find it works, other may find it does not.
LINKS IN SECOND POST
Source code: https://github.com/lirokoa
Patch needed for now:
https://github.com/NamelessRom/android_frameworks_av/commit/6f0780af3afeae1455334158cb0ce5e5c47b1068
https://github.com/NamelessRom/android_frameworks_av/commit/46313ea36acecb5954c4ba1e80c6ea03107a6c94
https://github.com/NamelessRom/android_frameworks_av/commit/919f7b91b8798487e8aedc8831b51e7df738e215
https://github.com/NamelessRom/android_frameworks_av/commit/ce1a9b722ae5b70691560fd6c20472da816b1ff2
https://github.com/NamelessRom/android_frameworks_av/commit/eeebdd01315c84b4616aa0a58e6939fba61d3203
http://review.cyanogenmod.org/#/c/77755/
https://github.com/CyanogenMod/android_frameworks_native/commit/540345f70db4f0cea6ad3f1150d2cb2fac18da25
And fix all errors in android_harware_samsung
CREDITS:
The whole Cyanogenmod team
Special thanks @dhiru1602 for his awesome work on exynos 4
All people who works on the Exynos 4 SOC, they desserve it
XDA:DevDB Information
CM12.0 N8013/N8000, ROM for the Samsung Galaxy Note 10.1
Contributors
lirokoa
Source Code: https://github.com/lirokoa
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: No Longer Updated
Created 2014-11-20
Last Updated 2015-04-20
FAQ:
Keyboard does not work: enable hardware keyboard in settings.
Google chrome got graphics glitches: just disable #enable-gpu-rasterization in chrome://flags
If you don't want to see cursor while using S-Pen, you can disable it it in settings / inputs
If you have trouble with video playback you can try to disable NuPlayer in developer settings
KNOWN BUGS:
SELinux disabled
Enabled NON PIE executable to be executed (needed for GPS)
I probably forget many
CURRENT VERSIONS:
-12/03/2015:
N8013:http://forum.xda-developers.com/devdb/project/dl/?id=11520
N8000:http://forum.xda-developers.com/devdb/project/dl/?id=11521
Changelog:
- Add usb otg support
- Mouse /SPen cursor fixed with proprietary hwcomposer (can be disabled in settings), thanks @dhiru1602
- MediaProfiles updated from stock kitkat rom (used for encoding video from cam)
- Removed ambient display
- Misc changes.
- Upstream CM changes.
History:
-28/02/2015:
N8013:http://forum.xda-developers.com/devdb/project/dl/?id=11312
N8000:http://forum.xda-developers.com/devdb/project/dl/?id=11314
Changelog:
- Changed power profiles to stock one even if there values are incorrect. (for battery stats)
- Fix Bluetooth permissions for other users
- Added advanced display settings
- Added ability to change vibrator intensity
- Fixed usb charging mode
- Upstream CM changes.
-11/02/2015:
N8013:http://forum.xda-developers.com/devdb/project/dl/?id=11090
N8000http://forum.xda-developers.com/devdb/project/dl/?id=11091
Changelog:
- Added CM performance profiles
- Added stylus gesture settings
- Added ability to move apps to SD
- Reverted a2dp freq to 44.1 Khtz
- Added correct permission for consumer IR hal on N8000
- misc changes...
- Upstream CM changes.
-06/02/2015:
N8013:http://forum.xda-developers.com/devdb/project/dl/?id=11004
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=11005
Changelog:
- N80XX: support for dock keyboard
- N80XX: changed behavior of IR blaster, please report if it works better with your usual apps.
- N80XX: Bluetooth audio should be better (cm team pushed some stuff)
- N8000: Network settings FC should be fixed, please report
- Upstream CM changes.
-26/01/2015:
N8013:http://forum.xda-developers.com/devdb/project/dl/?id=10768
N8000:http://forum.xda-developers.com/devdb/project/dl/?id=10804
Changelog:
- Totally new kernel based on n7100 official kitkat source
- Full hardware composer support (same as stock, using proprietary blob)
- Netflix working
- Pen don't have cursor anymore
- upstream CM changes
If you like this, Please go say thanks to NamelessRom guyz on the Galaxy S3 thread, they desserve it, for the work thy do on exynos 4 SoC.
-14/01/2015:
N8013:http://forum.xda-developers.com/devdb/project/dl/?id=10598
N8000:http://forum.xda-developers.com/devdb/project/dl/?id=10596
Changelog:
- Fixed FC in dialer (N8000)
- Audio changes: Added 48Khtz sampling rate support on main output
- Audio changes: Removed earpiece (wed on't have one)
- upstream CM changes
-02/01/2015:
N8013:http://forum.xda-developers.com/devdb/project/dl/?id=10423
N8000:http://forum.xda-developers.com/devdb/project/dl/?id=10425
Changelog:
- Fixed stock camera app
- Added correct hardware keyboard overlay
- Fixed power off charging (use open source one)
- upstream CM changes
-22/12/2014:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=10239
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=10245
Changelog:
- Android 5.0.2
- N80XX: changed bluetooth audio sampling rate to 48khtz
- N8000: Added back Samsung STK
- upstream CM changes
-17/12/2014:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=10189
N8000: https://mega.co.nz/#!TAtHQaLJ!dufJEQpyaAQpkJWd5rvrAsh25UZhiPWb8IY40Hg4cF0
Changelog:
- N8000 First release
- N8013 bluetooth audio fixed
- upstream CM changes
-09/12/2014:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=10111
Changelog:
- Android 5.0.1
- upstream CM changes
- Fixed torch
- Fixed video with kitkat bootloader
- updated some proprietary blobs
-28/11/2014:
N8013: https://mega.co.nz/#!jcEhAZAA!unlyc7DCVa-bL02a7TYMBJQDxK0Q2pL8PGSPuSW924Y
Changelog:
- Fixed GPS
- Fixed camera: use google camera (stock camera application make device to reboot)
- upstream CM changes
-23/11/2014:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=9822&task=get
Changelog:
- Fixed gaphics glitch on screenshot / rotation
- upstream CM changes
-20/11/2014:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=9739
Nice to see our device running latest CM. Definitely will try this on the weekend.
Thank you for sharing this.
I'm on stock recovery and such. Is there an install tutorial on which cwm or twrp to use?
bmwh0r3 said:
I'm on stock recovery and such. Is there an install tutorial on which cwm or twrp to use?
Click to expand...
Click to collapse
Since this is a preview build, I suggest you steer clear of it unless you already know what you are doing. I know it's tempting to be the first on your block with Lollipop, but you can seriously damage your device if you don't already know what you're doing.
Its not my first rodeo. I returned the tablet to stock from cm11. I had a note 3 that got me familiar with Odin. Odin is my b*tch lol
Some additions
Here are some things that will help you all get started on this.
1) Make sure you have a relevant gapps package, like this one here: Gapps for CM12
2) If you want root, you're best bet is to use this SuperSU beta here: SuperSU for Lollipop BETA
Also, I have found that using Google Keyboard works better than the default AOSP keyboard, especially when it comes to emoji.
Hope this helps out a little
Thanks. What about the recovery? It took me a good month trying to figure out I needed a kk recovery for cm11 when I first started learning about android and flashing Roms. I was dumb and not reading between the lines lol
I used this recovery: http://techerrata.com/file/twrp2/p4noterf/openrecovery-twrp-2.8.1.0-gt-n8013.img
not sure what's the big difference between this and n8010 or n8000
So I gave this rom a go and it seems to work fine for the most part (other than the bugs mention in the OP). I hope that this rom will get ironed out soon!
fastest cm ever, great work.
i'll be reporting and trying to look for bugs
@lirokoa i noticed there was some strange files coming, the data stuff,
i need to setup my build env properly
i haven't build since jellybean release
and the performance is highly increased
about graphical glitches i'm sure only we have it
S-pen support seems off. It detects it, but does not pass the right values for pen tip and buttons. Almost like it is using the mouse functions instead.
Now this is awesome can't wait to see the process on this beast thanks again dev good luck!
Can I flash this rom on N8000?
Can i get a try on n8000?
mysarasaid said:
Can i get a try on n8000?
Click to expand...
Click to collapse
N8000 is not supported for now, first i'd like to get n8013 in good shape.
Sent from my Nexus 4 using XDA Free mobile app
lirokoa said:
N8000 is not supported for now, first i'd like to get n8013 in good shape.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
I was about to flash a rom I will try it before flashing the other rom ?
Mohamadreza said:
Can I flash this rom on N8000?
Click to expand...
Click to collapse
you can but don't expect to get bug's fixed
anyhow running this on N801x (with n8000 BL)
Current List Running N8000 bootloader (Tablet is N8010)
listening to music and turning torch on then off will stop the music playing and if you try to start playing it will skip two tracks.
Activating WI-FI can have some issues turning on.
display > advanced settings doesn't work
Youtube doesn't work "New BL" OLD BL Users Please Report.
Play Music Closes For No Reason (Note this is inside Lollipop Apps)
Display Bug Date And Time will show GMT+ 00 GMT+ 00
More Comes Soon
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
STATUS: BETA
This is a preview build, do not install it if you want a stable ROM.
This is a preview of what is going down on CM12.1
Rom is in beta state so many bugs are to be expected!
All the source code is available on my Github.
I do this on my free time and unfortunately I don't have much.
Any help is a appreciated!
I don't own N8000 device, so all RIL is untested, some may find it works, other may find it does not.
LINKS IN SECOND POST
Source code: https://github.com/lirokoa
CREDITS:
The whole Cyanogenmod team
Special thanks @dhiru1602 for his awesome work on exynos 4
All people who works on the Exynos 4 SOC, they desserve it
XDA:DevDB Information
CM12.1 N8013/N8010/N8000, ROM for the Samsung Galaxy Note 10.1
Contributors
lirokoa
Source Code: https://github.com/lirokoa
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: No Longer Updated
Created 2015-04-13
Last Updated 2015-12-30
DOWNLOAD LINKS:
-27/10/2015:
N8013/N8010: http://forum.xda-developers.com/devdb/project/dl/?id=14927
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=14928
Changelog:
- Kernel: Many fix, check github for full list
- Display: Refresh rate is now 60htz (was 55 htz)
- io scheduler is now BFQ by default (should improve multitasking)
- Fix chromecast screen mirroring
- Updated audio HAL
- Reworked SELinux
- SKIA hardware optimisation
- Upstream CM changes.
Old releases :
-24/09/2015:
N8013/N8010: http://forum.xda-developers.com/devdb/project/dl/?id=14521
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=14533
Changelog:
- Kernel: Rebased on N8010 kitkat official samsung source (before was based on n7100 kernel)
- Kernel: Updated lowmemory killer
- Kernel: Updated binder
- Kernel: Added BFQ io scheduler (not really stable, be aware if you decide to use it)
- Netflix should be fixed once again
- Enable dex-preoptimization to speed up first boot sequence
- Removed timeout in dex2oat
- Upstream CM changes.
-28/08/2015:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=14203
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=14210
Changelog:
- Upstream CM changes.
-03/06/2015:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=12826&task=get
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=12829&task=get
Changelog:
- Netflix fix
- Miracast / chromecast screen casting speed improvement
- Seeking video in web browser working
- Misc changes
- RIL (N8000), some try to fix call / networking scanning
- Upstream CM changes.
-08/05/2015:
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=12375
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=12377
Changelog:
- Misc. bug fixes
- Upstream CM changes.
-23/04/2015:
Before installing read carefully this post
N8013: http://forum.xda-developers.com/devdb/project/dl/?id=12106
N8000: http://forum.xda-developers.com/devdb/project/dl/?id=12108
Changelog:
- Android 5.1.1
- SELinux set to enforcing
- Fixed crash when screen timeout is set to 30 min.
- Upstream CM changes.
-17/04/2015:
N8000: https://mega.co.nz/#!qQ1TVJYZ!1CS7UxGw_ntbd-bT9J0xnH0MyAmqJwneD4ZkqX23bBY
Changelog:
- Initial release (call seems to be not working)
-13/04/2015:
N8013: https://mega.co.nz/#!CUcTCAJB!YzWpI6XWkMGCwTPjT9-G7ZCiM7zF6tVYwAVGQfLujhU
Changelog:
- Initial release
FAQ:
Which Gapps to use? the one officially supported by Cyanogenmod, you can get them here
After installing ROM + Gapss, GApps keep crashing: Just update your recovery with the provided twrp.
Keyboard does not work: enable hardware keyboard in settings.
Google chrome got graphics glitches: just disable #enable-gpu-rasterization in chrome://flags
If you don't want to see cursor while using S-Pen, you can disable it it in settings / inputs
If you have trouble with video playback you can try to disable NuPlayer in developer settings
KNOWN BUGS:
N8000: scan network
Enabled NON PIE executable to be executed (needed for GPS)
I probably forget many
Tried to upload few times this evening, and xda servers keep crashing, will try again tomorrow morning.
What about N8000?
mysarasaid said:
What about N8000?
Click to expand...
Click to collapse
lirokoa said:
FAQ:
[*] N8000 will be added when N801x is in good shape.
Click to expand...
Click to collapse
---------- Post added at 09:04 PM ---------- Previous post was at 09:03 PM ----------
Can you tell me if I can just overwrite my CM12 with this CM12.1 and do Wipe Cache? (I know I can't report bugs without all wipes, I just want to know if I can do that or it won't boot)
Build is up, but I had to up it on mega...
Enjoy
Smoother than BlissPop V2.3 ... Love it ...
Thx a lot ^_^ ...
Rotation Issue
Great 5.1 ROM to kick off. Thanks
The screen rotation will only disable into landscape mode. It is does not seem possible to disable rotate into portrait mode only.
Did I miss something?
Thanks
Installed just now. Rom feels a lot more snappy and much smoother animations than before. I have a bad habbit now of opening and closing the notification bar now just on how silky smooth it is. Great work
Sylheti said:
Great 5.1 ROM to kick off. Thanks
The screen rotation will only disable into landscape mode. It is does not seem possible to disable rotate into portrait mode only.
Did I miss something?
Thanks
Click to expand...
Click to collapse
Nop, it's probably a bug in CM. Keep in mind that cm12.1 did not reach nightly build yet. So those build are a kind of preview.
Sent from my GT-P5110 using XDA Free mobile app
Using camera may cause system reboot.
The first time reboot when I used build-in camera app. (almost no other apps installed except gapps)
The second time reboot when I used google camera installed from google play market.
Bluetooth audio may cause sound glitch.
It seems CM12's problem. Changing performance option to Performace may reduce bluetooth sound problem.
BTW, use 5G WIFI seems also reduce bluetooth sound problem.
So far good, it is a keeper for now ?
One bug
Configuration crashs when I try to raise screen timeout to 30 minutes.
Does HDMI work?
I tried once unsuccessfully.
I am a n8010 user
Added link for N8000 in 2nd post.
This is early build, and call seems to be not working but 3G is.
Please report with logcat and radio logcat if you get some trouble (especially for phone call).
lirokoa said:
Added link for N8000 in 2nd post.
This is early build, and call seems to be not working but 3G is.
Please report with logcat and radio logcat if you get some trouble (especially for phone call).
Click to expand...
Click to collapse
thank you very much
Need Full Wipe to install over the CM12?
juniorhxcx said:
thank you very much
Need Full Wipe to install over the CM12?
Click to expand...
Click to collapse
You should be able to update without wiping.
lirokoa said:
You should be able to update without wiping.
Click to expand...
Click to collapse
I did not Update Full Wipe and starts normally.
However, I believe the Gapps he had used in CM12 (used PA GAAP) was incompatible with the CM12.1. For some App have forced closure beyond the keyboard does not appear.
So I performed a clean installation, with GAAP basis 20150417 and everything works great. Thank you!
juniorhxcx said:
I did not Update Full Wipe and starts normally.
However, I believe the Gapps he had used in CM12 (used PA GAAP) was incompatible with the CM12.1. For some App have forced closure beyond the keyboard does not appear.
So I performed a clean installation, with GAAP basis 20150417 and everything works great. Thank you!
Click to expand...
Click to collapse
Yes, gapps need to be updated.
Sent from my Nexus 4 using XDA Free mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 15.1 for hero2lte
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Camera
- Camcorder
- Wifi
- Sound
- mali drivers
- USB tethering
- Video Playback
- Fingerprint Sensor
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons and their backlight
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- Stuff I didn't test yet
- HW encoding/decoding
- Charging with device powered off
- HWcomposer (HWC)
- GPS
- Screen cast
- Bluetooth in call audio
Not working
-
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
(some bugs also require dmesg and/or (last_)kmsg and/or /data/tombstones/*)
Install gapps right after installing the rom itself dont try to boot to system before that
Downloads:
Google Drive
Mega.nz
MD5: 1a864a2487da8df0bcf18f28d17afe88
OpenGapps
MindTheGapps
Root
15.0 Build and gapps
WARNING THOSE BUILD HAVE BUGS AND SHOULD NOT BE USED, THEY ARE HERE JUST FOR REFERENCE
Mega.nz
Google Drive
MD5: 3862B94FDE06F4DF904CBF502B210940
gapps:OpenGapps
If you can't boot phone up after installing OpenGapps please use A-GAPPS
I do this in my free time so bear that in mind when you notice I didn't fix known bug in next available build, Currently i work on this alone and i am not one of those kangers that just copy source and claim it as their own work,
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 8.1.0 Oreo
Changelog
18.02.2020.
- Merged february 2020 security update
- Synced with LOS source
03.12.2019.
- Merged december security update
- Misc performance and stability updates
13.06.2019.
- upstreamed kernel to 3.18.140
- Updated to June 2019 security update
- Updated to May 2019 vendor (samsung side) security update
- bsp side performance updates
30.04.2019.
- Updated kernel to 3.18.138
- Synced with april security update
- Enabled quota support on /data partition
- Synced with LOS source
17.03.2019.
- Updated to march security pattch
- Added aptx and aptxhd codecs for bt audio
- Added HealthServices and permissions (Heart rate monitor is reported by the app now but it still needs to be granted missing permissions
Ill resolve issues with that in next release hopefully)
- Misc performance and stability updates
- Synced with los source
04.03.2019.
- Merged February security update related to samsung source
- Added 2 more missing macloader mappings
(if you continue having issues send me first half of /efs/wifi/.mac.info)
- Fixed Bluetooth issues introduced with february security update
(if you continue having issues send me first half of /efs/bluetooth/bt_addr)
- merged FXXU3ERL3 source to kernel
- Updated kernel to 3.18.136
- Misc performance and stability updates
- Synced with LOS source
13.02.2019.
- Updated kernel to 3.18.134
- merged February 2019. security update
- Added another missing mac oui
*(If you are still having wifi issues send me first half of your /efs/wifi/.mac.info)
- Audio: Improved handling of ril_set_call_clock_sync which would mute calls on some devices
- Audio: Resolved issues where there was race condition when connected to bt listening to navigation and recieving a call would cause call to be muted
- Audio: Fixed call recording (Use external app from play store, Ive tested "Automatic Call Recorder" and it was working fine)
- Audio: Fixed voip over BT headset
- Audio: Fixed audioserver crash on in_get_capture_position()
- Audio : Misc cleanup and stability improvements
- General performance and stability improvements
03.02.2019.
- Updated list of mac addresses
* If you are still having issues send me first half of /efs/wifi/.mac.info, I need it for OUI lookup
- Synced with LOS source
21.01.2019.
- Updated kernel to 3.18.132
- Bumped vendor security level to january
- Added mapping for more mac addresses
*If you are still having issues send me first half of /efs/wifi/.mac.info, I need it for OUI lookup
You shouldnt have any privacy concerns as first half is used to identify wifi chip manufacturer
and this is really only way to handle it (https://en.wikipedia.org/wiki/Organizationally_unique_identifier)
- Misc performance and stability updates
- Synced with los source
10.01.2019.
- Removed old bluetooth and wifi firmwares
- Upstreamed kernel to 3.81.131
- Resolved issue where battery would drop on reboot/shutdown due to max capacity from kernel not being saved in system
- Moved wifi related configs to /data/misc/conn/ from /data/ to comply with new kernel
- Resolved issue where some wifi chips wouldnt gether right firmware on bootup
- Synced with LOS source
20.12.2018.
- Updated vendor blobs to December security patch (FXXU3ERL3)
- Added Sim Toolkit app by default
- Synced with LOS source
13.12.2018.
- Updated kernel to 3.18.128
- Merged XXU3ERJE samsung kernel source
- Added double tap to wake (Can be disabled from settings->Display)
- Moved doze to Settings->Display from main settings page
- Merged December security update
- General performance and stability improvements
- Synced with LOS source
30.11.2018.
- Updated kernel to 3.18.127
- Added missing mac address for new revisions of s7 that had weak signal due to missing mapping
- Synced with LOS source
21.11.2018.
- Updated kernel to 3.18.125
- Fixed potentional crash while in call
- Improved WBS bt handling
- Imported Novender security update blobs from samsung (ril, should imrpove its stability and battery life a bit)
- Synced with LOS source
09.11.2018.
- Merged november security update
- Resolved bluetooth in call audio issues
- fixed issue where NFC wouldn't turn on after being off for too long
- Misc stability and performance improvements
- Synced with LOS source
05.11.2018.
- Imported XXU3ERJ3 vendor blobs
(Camera, OMX, RIL)
- Fixed Emergency Alerts
- Updated Service Provider Name list
- Added thermal hal
- Misc stability and performance improvements
- Synced with LOS source
23.10.2018.
- Resolved issues with USB audio input and output devices
- Moved gps xtra server config to overlay (faster lock time on gps)
- Updated Service provider name list
- Updated to newest vendor security patch (FXXS3ERJ2/October 2018) (ril,camera,gps,wifi/bt.)
- Synced with LOS source
15.10.2018.
- Updated to linux kernel 3.18.124
- Cleaned up kernel source
- General performance and stability improvements
- Synced with LOS source
08.10.2018.
- Resolved call audio quality issues
- Synced with los source
04.10.2018.
- Updated mali drivers to R22P0 from R12P0
* This should improve graphics performance, stability and battery life
- Updated OMX libraries
- Updated gralloc
- Updated camera libraries to oreo
* This drastically improves image quality in proper light conditions
- Removed BT WBS flag that forced it into wideband speach mode
* If you are still having issues with nt calls try setting
audio_hal.force_voice_config=wide or audio_hal.force_voice_config=narrow
in build.prop
- Updated all of the other prebuilt libraries to oreo ones
- Resolved issues where camera wouldnt take video in some apps (gcam)
- General stability, security and performance improvements
- Removed unused prebuilt binaries
- Removed all of the shims that became deprecated due to switch to oreo blobs
- removed camera wrapper (new camera hal works out of the box without manipulation)
- Synced with LOS source
- Take a not that this build also has a lot of changes under the hood that
drastically improve its stability and performance
27.09.2018.
- Updated kernel to 3.18.123
- Disabled force WBS for bluetooth calls (should improve bt calls compatibility with some devices)
- Synced with los source
18.09.2018.
- Upstreamed linux kernel to 3.18.122
- Security updates
- Synced with LOS Source
09.09.2018.
- Updated kernel to 3.18.121
- September security patch merged
- Adjusted Auto brightness values
- Enabled HW mpeg2 decoder (In case app developers really feel like using it)
- Synced with LOS source
29.08.2018
- Merged linux 3.18.120
- Merged new smasung kernel drop ERH1
- Fixed issues on some devices with murata samsung wifi chip (if you are still having issues with low signal send me first half of phones mac address)
- Synced with LOS source
28.08.2018.
- Updated kernel to 3.18.119
- Fixed issues where live display wouldnt persist after locking the device
- Fixed issues with CTS props
- Updated media profiles (OMX performance)
- Reimplemeted color calibration and sunlight enhancements
- Misc stability and performance improvements (See git)
- Synced with los source
20.08.2018.
- Switched to simplified camera wrapper (This will help with camera stability and it will be easier for me to trace down which flags are causing quality issues)
- Updated build fingerprint and description (safetynet)
- Removed flag that enabled ADB by default
- Builds are now signed (No more test keys, and it also makes them more secure as it prevents non signed builds to be installed on top)
- Misc changes (Stability and performance improvements)
- Synced with LOS source
11.08.2018.
- Updated libion memory management
- Removed config that was confliciting with 5GHz wifi networks
- Switched to auto generated hidl manifest
- Removed broken livedisplay implementation (Falls back to aosp one now)
- Merged August Security Patch
- Synced with LOS source
05.08.2018.
- Updated WiFi firmware
- Updated Audio firmware
- Updated Bluetooth Firmware
- More screen cast imporvements
- Updated APN list
- Enabled BT WBS by default
- Enabled BT LE mode
- Switched to 16kHz WBS profile
- Fixed MMS Profiles
- Fixed bug where some UI elements would show that FP sensor is on the back of the device
- LiveDisplay improvements
- Synced with LOS source
04.08.2018.
- Fixed Wireless display (Screen mirroring)
- Fixed Operator name displaying as numbers for some users
- Fixed support for NV12 YUV Pixel format support
- Synced with LOS source
02.08.2018.
- Updated to ERG2 kernel sources
- Imrpoved stability battery life and it shouldnt overheat anymore
- Updated NFC drivers
- This should resolve all remaining nfc issues that were present for some users
- Synced with LOS source
01.08.2018.
- Completely swapped kernel to a new base (ERF4) and upstreamed to 3.18.91
- No more random reboots (No matter which gapps you use either)
- general stability improvements
- performance improvements
- battery life improvements
- Added new mac ranges to macloader algiorithm
- This will ensure people that had weak wifi signal will have better reception as their chip
will get properly detected (If you are still having issues with wifi range feel free to reach me
in PM ill need first half of phones mac address)
- Switched to oreo ril blobs
- This will improve signal strenght
- Battery life
- General ril stack stability (voice/data/sms)
- Fixed Drm content
- New version of netflix app will work so will apps that depend on it
- Added nfc wrapper (this should help with nfc stability)
- Removed kernel is not seandroid enforcing warning
- Fixed GPS
- Updated all of the gps and sensor blobs to ones from oreo ERF4
- This wont help you locate nearby seals tho, they dont want to be seen and will keep hidding from gps
- Synced with LOS source
31.05.2018.
- Added auto build fingerprint/description fixup function (This can replace safetynet fix) (Only works with OREO bootloader)
- Enabled SdcardFS (Improves flash memory read/write speeds, Not only sdcard)
- Revamped audio hal (Stability imporvements with audio/bt audio)
- Added custom livedisplay that looks better than previous one
- Stability improvements
- Synced with LOS source
23.04.2018.
- Updated mali driver prop to 3.20 to advertise new apis and vulkan properly
- Removed AudioFX (It was broken on all non qcom devices)
- Improved sound quality on speaker and earphones
- Switched to local APN list (This should solve issues where some users had to manually sellect their APN)
- Added auto detection in BT settings for device name so flat builds dont show as s7 edge on bluetooth as default anymore, they get properly identified as s7 flat now
- Synced with LOS source
11.04.2018.
- Updated sensor blobs
- Enabled and fixed WiFI display support (miracast,samsung smart tv and such)
- Fixed bug where touch would stay active in call
- Synced with LOS source
07.04.2018.
- Updated OMX blobs
- Switched to prebuilt libExynosOMX_Core and libExynosOMX_Resourcemanager (Should resolve issues where yt audio would start without video and decrease a chance of framedrops)
- Enabled OMX
- switched to open source implementations of :
gralloc
libexynosscaler
libexynosgscaler
libexynosv4l2
(...Insert more changes here...)
- Switched to new (private) BSP source, This should improve general system performance and stability
- Fixed HWC (Improved performance of UI since it uses gpu for it which also improves battery life)
- Synced with LOS source
- Misch changes and improvements (Sorry too lazy for changelog as this build just includes too many changes, Ill try to list them here soon)
28.03.2018.
- Improved stability of front camera in stock camera app
- Stability and performance improvements
- Synced with LineageOS source
26.03.2018.
- Switched to a new camera app
- Added 4k recording profiles for other camera apps
- Stability improvements
- Synced with LOS source
20.03.2018.
- Fixed issues introduced in previous build
19.03.2018.
- Fixed key configuration
- Switched adb to FlashFS interface from legacy
- Fixed issues with accelerometer auto rotation
- even more OMX improvements
- synced kernel defconfig with android-3.18-o-mr1 recommended config
- Improvements to fingerprint sensor hal
- audio and ril improvements (Microphone wont get muted in call anymore) and ril hal has been cleaned up
- Resolved out of memory issues with dalvik/art config which caused around 99% of random reboots
(Note biggest gapps you should ever use with rom are micro there are issues with gapps themselves)
- enabled and fixed sdcardfs (This should improve internal storage rw speed)
04.03.2018.
- Added samsungs sdfat filesystem to support exFAT formated sd cards
03.03.2018.
- Fixed charging with device powered off
- Resolved conflcts with OpenGapps
- Added support for korean device variants
- Improved stability of OMX
- NFC chip firmware now updates to latest provided firmware from drivers
- Imrpovements to audio and ril hal (Check my github if you really want to know)
- system partition now mounts early in boot proces (Should speed up boot a bit)
- Fixed delay when turning on torch
- Fingerpeint sensor doesnt look for fingerprint while screen is off anymore(Moar battery and it was unreliable
- Synced with LOS source
22.02.2018.
- Fixed HW encoding/decoding (finally)
- Fixed most of the remaining random reboot issues
- Updated media profiles and codecs config (More file formats should play now)
- Synced with LOS source
14.02.2018.
- fixed apn for MMS on some dual apn carriers
- Boosted micrphone volume
- Moved from staging/lineage-15.1 to stable branch
- Added lineage overlays for dark UI
- Synced with los source
01.02.2018
- Fixed hardware compass
- added back some HRM sensor permissions
- Added toggle for button backlight
- Fixed key disabler reseting after reboot
- Merged latest LOS source
22.01.2018.
- Audio and bluetooth hal imporovements
- Fixed LED notification light on charging and other events
- Fixed vibrator intensity changing
- Added smart dimming aka Flicker free mode to kernel ( use "echo 1 > /sys/class/lcd/panel/smart_on" to enable it, its disabled by default)
- Added advanced reboot
- Added button settings and button disabled
- Synced with LOS source (Quite a few new features have been added to LOS since last update)
09.01.2018.
- Improvements to bluetooth and audio hal
- Synced with LOS source
02.01.2018.
- Synced with LOS source (few new features are implemented to LOS)
- stability improvements
- Switched to linaro for kernel toolchain
- Misc updates and fixes
16.12.2017.
- Fixed random reboots that were present during first boot
- Enabled home button wakeup
- Added more advanced version of the doze
- Misc stability improvements
11.12.2017.
- Switched to staging/lineage-15.1 branch
- Updated device source to work with 8.1
- Fixed sensor issues 8.1 introduced
- Fixed video playback in portrait modei n stock gallery app
- Misc changes and bug fixes
2.12.2017.
- Fixed all graphical glitches that were present in UI elements (Should also fix setup wiz. in some cases)
- Updates to FP hal
- Device tree cleaned up a bit
- Enabled LTE menu when selecting network type
- Misc changes and improvements
27.11.2017.
- Enabled home button wakeup
- APK's can now be installed from stock file manager
- Fixed ril on Dual sim devices (G93*FD)
- Fixed bug where some apps couldnt access internal storage (Messenger,whtsapp,instagram)
- Misc changes and improvements to general system stability
26.11.2017.
- Fixed senors
- Fixed ril
- Misc changes (See git)
25.11.2017.
- First public release
XDA:DevDB Information
LineageOS 15.1 (Android 8.1.0) for S7 Edge, ROM for the Samsung Galaxy S7 Edge
Contributors
Ivan_Meler
Source Code: https://github.com/ivanmeler/android_kernel_samsung_herolte
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0.R
Stable Release Date: 2020-02-18
Created 2017-11-25
Last Updated 2020-02-18
Reserved
More screenshots https://imgur.com/a/jm5mR Enjoy
Nice work! Thanks
will there be future compilations for the G930F?
NCG-natsu said:
will there be future compilations for the G930F?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s7/development/lineageos-15-android-8-0-0-herolte-t3710107#
Sure thing
Is it just me or are the links not working?
Sorry I had adblocker on.
Duck4Cover said:
Is it just me or are the links not working?
Sorry I had adblocker on.
Click to expand...
Click to collapse
Adblock shouldnt have any influence on links, They go directly to google driver/mega
Ivan_Meler said:
Adblock shouldnt have any influence on links, They go directly to google driver/mega
Click to expand...
Click to collapse
It did for some reason. As soon as I turned it off it sorted it.
Awesome work. Error in reading the simcard
peur said:
Awesome work. Error in reading the simcard
Click to expand...
Click to collapse
+1 Same Issue here
shafi31 said:
+1 Same Issue here
Click to expand...
Click to collapse
same here
peur said:
Awesome work. Error in reading the simcard
Click to expand...
Click to collapse
shafi31 said:
+1 Same Issue here
Click to expand...
Click to collapse
majinawaz said:
same here
Click to expand...
Click to collapse
3 of you can read and use google right? Because it seams like you cant do either of those 2 things i am sorry for saying this but come on..
Fir of all right in the bug list what is the first thing you can see?
Not working
- Ril
Dont know what ril is? SImple enough google "What is ril" and find wikipedia article https://en.wikipedia.org/wiki/Radio_Interface_Layer
Oh and other than that i also said something else in OP
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
Thank you for not reading OP..
The f*ckin hero you are bro.
On top of already reported:
BT media works
GPS works
Cast works
MTP works
NFC works
LED workd
Capacitive buttons works
Some graphical glitches, but in general smooth,especially in this stage of development.
Good job.
Sent from my SM-G935F using Tapatalk
Ivan_Meler said:
Thank you for not reading OP..
Click to expand...
Click to collapse
That is too funny!!!!
Quick progress update, Fixed issues with rotation sensor and stuff, Still working on ril
Waiting for RIL, ready to test, good work!
Amazing to see oreo roms for the s7 family
Thank you brother, Really! U are the hero of herolte and hero2lte xD
@Ivan_Meler
I made a video about this rom including the installation instructions you can add it to the thread if you want
https://youtu.be/38_oeq-ZYb8
Oh bro Thanks you for your work this is amazing, Good Job <3
Enviado desde mi SM-G955F mediante Tapatalk
Ehm kinda big news here..
I'm Not even a developer, but a builder bot
Here is a collection of LineageOS 14.1 and other LineageOS 14.1-based Custom ROMS, these Custom are Compiled from me with the source tree of @Dinolek.
His Device Tree uses MIUI lolipop blobs instead of marshmallow alps blobs which we used for Marshmallow before.
------------------------------------------------------------------------------------------------------------------------
Working :
* Adjustable brightness
* Audio
* Auto brightness
* MTP and Mass Storage modes
* Vibration
* Rotation
* RIL
* Video
* Gallery
* Mic
* Wi-Fi
* Bluetooth
* Internet
* GPS
* Hotspot
* Camera rear/front
* SD Card
* IR Blaster
* Built-in Signature Spoofing (for MicroG)
-----------------------------------------------------------------------------------------------------------------------
Broken/Bugs :
* Camera rear/front while trying to record video from stock camera (but you can record from other camera apps too)
* SafetyNet passes only with Offical Kernel source from Micode
------------------------------------------------------------------------------------------------------------------------
I this link I have included these Custom ROMS:
- LineageOS 14.1
- DotOS 1.2
- ViperOS 3.1.1
- Dirty Unicorns 11.7.2 (AOSP-Based, experimental)
- RR 5.8.5
- crDroid
Download Link: https://mega.nz/#F!0ZgiDaCS!1qISJ4mb9jWnA1W2vfUJcg
Source Trees:
Device Tree:
https://github.com/Azizb750/android_device_xiaomi_hermes
Vendor Tree:
https://github.com/Azizb750/android_vendor_xiaomi_hermes
Kernel Tree:
Official: https://github.com/Micode/Xiaomi_Kernel_OpenSource
Upstreamed: https://github.com/Azizb750/Xiaomi_Kernel_OpenSource
Credits:
@Dinolek for his source tree (don't worry I have already took his permission before)
@Smosia for his new hennessy tree and his fixes
@nofearnohappy
@lokjianming
@danielpinto8zz6
@andrea210701
@l7ssha
@Syl157
@daniel_hk (for his updated gps hal)
@ibilux (for his help to fix the bugs)
MiCode for Publishing Finally the hermes/hennessy kernel source!
Thanks to these developers/maintainers for making our device still alive!
NOTE: The ROM's are not fully stable, So I'm not responsible for the bugs which will occur later
_______________________________________________
Troubleshooting
- Some apps are crashing for a reason what's wrong?
- if you use Magisk root some apps are crashing for a reason, to solve this change Mount NameSpace Mode to Global and disable Magisk Hide and reboot (you cn re-enable it later if you want/need it),
I discovered this solution when I used older RR N 5.8.2 and the apps will not crash anymore, another way is to set ro.debuggable to 1 using MagiskHide Props Config module and reboot. But now the custom kernel is not causing this bug anymore, but in case you will meed it.
- SafetyNet fails what to do?
- If you fail Only CTSProfile, you can use this module
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
This will help you to Pass CTSProfile using custom build fingerprint from other certified devices.
If you use xposed and want to pass CTSProfile, you can use an xposed module called "No Device Check", but as far I know its impossible to pass BasicIntegrity with xposed installed, but using this module is pretty enough to log in via snapchat and using some apps but not for Pokemon GO
Edit: SafetyNet was failing due of kernel, the kernel source from Micode (or from mine upstreamed) passes it.
-what's MicroG?
- MicroG is an lightweight and opensource re-implementation of Gapps
- how do I install it?
- same as Gapps + you will need to wipe cache/dalvik and grant for signature spoofing
- In self check I see that Phonesky/Play Store has not correct signature, why does it happen?
- you need to grant for signature spoofing manually you can do it by going to Settings->Apps->Gear(in top right corner)->App Permissions-> Spoof package signature/(or signature spoofing, depends on the rom) and giving permissions to spoof signature, you can do the same to GMSCore too in case you did still haven't granted for it before
- I have problems with sign in with my account, what to do?
- this happens mostly when you are Replacing Gapps with MicroG or reinstalling MicroG without sign out, if this happened just go and delete using root explorer this files:
/data/system_ce/0/accounts_ce.db
/data/system_de/0/accounts_de.db
/data/system/sync/accounts.xml and reboot, and now you should have sign in to your account successfully
_______________________________________________
Link for MicroG(ale5000): https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360
Link for MicroG(nanodroid): https://forum.xda-developers.com/apps/magisk/module-nanomod-5-0-20170405-microg-t3584928
_______________________________________________
Changelog:
-----------------
25082018 (except DirtyUnicorns and LineageOS*)/26082018 (for DotOS)
- Fixed GPS (credit: @daniel_hk, thanks to @ibilux)
- intergrated V1.P2 modem
* Some Users reported that LineageOS 14.1 2508 does not even boot, so I dropped it temporary
-----------------
27082018 (DotOS and RR)
- integrated Audio fix
- Added some init.mt6795.rc tweaks
- Added some new flags on BoardConfig.mk
-----------------
28082018 (LOS, DotOS and RR)
- same as 27082018 + took some .conf files from MIUI 9.6.3.0 and Disabled HW overlays Permanently
-----------------
29082018 (LOS, DotOS and RR)
Dropped as some users reported Bootloops
You can Download 2808 build instead
-----------------
01092018 (LOS, DotOS and RR)
- Added some lines in ramdisk (for video recording)
- updated BoardConfig.mk
- added new keylayout (Thanks ARTEM)
- added new tweaks in build.prop for [email protected] (thanks @ibilux for help) and removed init.d script
-----------------
03092018 (ViperOS)
- Added some lines in ramdisk (for video recording)
- updated BoardConfig.mk
- added new keylayout (Thanks ARTEM)
- added new tweaks in build.prop for [email protected] (thanks @ibilux for help) and removed init.d script
- edited build.prop to make it debuggable
-----------------
04092018 (LOS, ViperOS, DotOS, RR and crDroid)
- added some lines in ramdisk
- fixed bootloop (on 03092018 ViperOS)
------------------
06092018 (LOS, ViperOS, DotOS, RR and crDroid)
- Patched for built-in signature spoofing support for MicroG (LOS, RR and DotOS only, crDroid and ViperOS have already native support for it)
- tried to fix wakelock issues while playing music
------------------
13092018 (LOS, RR, DotOS, ViperOS and crDroid)
- tried to fix colors on camera (for video recording)
- fixed some codecs (not playing flac files)
------------------
22092018 (RR with custom kernel)
Not working:
Audio (trytofixcamera.zip from older RR may solve the problem)
touch atmel
most of sensors
camera
------------------
01102018 (eelo 0.1)
- First release
- used FM libs from @Smosia's tree (thanks @Dinolek for fixing FM and @Smosia for providing them)
- made some changes in ramdisk (init.mt6795.rc only, if you want spectrum support you can flash it by using a seperate zip)
------------------
07102018 (LOS, RR, ViperOS, DotOS)
- fixed FM Radio for sure now (thanks @Smosia and @ibilux)
- used folders from auroraroms device tree so can compile them from source (credits: )
- added camera_wrapper from @daniel_hk's tree
------------------
17102018 (LOS, RR and crDroid)
- updated some patches and some BoardConfig in the device tree (thanks @Smosia and @Dinolek)
· updated and applied newer patch to disable seccomp filtering (Credit: @Dinolek)
· updated and applied newer patch for hotspot (Credit: @Dinolek)
· applied patch to fix airplane mode bug (thanks @Smosia to adding it to the tree)
- black screen seems to be fixed this time (probably it occured due that forgot to add an flag about seccomp in BoardConfig as it was essential to disable seccomp filtering)
------------------
20/21/22/23/26/27/28102018
- reverted camera_wrapper (it makes things worse about screen recording)
all compiled by @dargonswim
------------------
05/06012019
(05012019 crDroid and ViperOS
06012019 LineageOS, DotOS and RR)
- Moved device-specific libs to Vendor as Part of preparations for Oreo and Pie(Credits: @Dinolek for doing it and @Smosia providing the tree)
- fixed triggering ringtone (credits: @Smosia)
- added a expermintal flag during compilation for VideoRecording bug (thanks: @ibilux)
------------------
16012019 (Ghost Kernel0.1)
- Source from Official Xiaomi Open Source
- everything works well
- Upstreamed kernel to 3.10.108
- added dt2w (on Focaltech only)
- Patched for oreo Binders
- Passes BasicIntegrity (Now is possible to pass CTSProfile with custom fingerprints)
------------------
18012019 (for LOS, RR and DotOS, 19012019 for CrDroid and ViperOS)
- kernel from source (thanks xiaomi for releasing kernel source)
- Upgrade Sepolicy 30
- merged some camera fixes (thanks @Smosia)
- SafetyNet passes BasicIntegry
------------------
22012019
(GhostKernel0.12)
- Added new ioscheds (credits: @andrea2107)
- Made some cherry-picks for selinux improvement
- fixed annoying /proc/self/fd/* bug found in logcat
- kernel source now is more hybris friendly
(GhostKernel0.13)
- added some cherry-pick for wifi from launchpad/ubports (with the hope to fix WiFi reconnections)
- disabled dt2w by default (you can enable it using Kernel adiutor)
(GhostKernel0.14)
- fixed kernel version not updating (probably broke the script accidentally, now it applies to system, so now updates the kernel version)
- made "bfq" io-scheduler as default (I learned that it performs much better than "cfq")
- added local version to the kernel
------------------
25012019 (LOS, RR, DOTOS, VOS, CR)
- Added new governors (Credit: @andrea2107)
- added enabled dt2w function on the kernel for focaltech (on atmel doesn't work), disabled by default, use Kernel Adiutor to enable it
- Merged New fixes and features of Ghost kernel0.14(as I use the source for compile the Rom's kernel too)
- fixed stk3x1x alsps bug
------------------
14022019
- Tried to fix Video Recording (on instagram at least it works as I saw, on camera apps still not)
- Ported codec configs to fix flac audio
- Moved modem path from /etc/firmware to /system/etc/firmware on the kernel
------------------
Well, congrats to us - Redmi Note 2 owners -.
Thanks to all contributors and developers.
Is this new version already fixed GPS and intergrated V1.P2 modem ?
LineageOS 14.1 can not read the SIM Contacts book
sanbox said:
LineageOS 14.1 can not read the SIM Contacts book
Click to expand...
Click to collapse
Yeah, but I don't know how to fix it, it looks mostly like a OS Bug
Thanks
How to save a file to external sdcard
Hi @Azizb750
First I read your post here: https://forum.xda-developers.com/showpost.php?p=77463249&postcount=1312
Coming from current RR Nougat ROM for hermes by Dinolek year ago, then I downloaded and clean installed RR-20180829 build and ended with bootloop
After you updated OP, I installed RR-20180828 build > opengapps (armv7, 7.1, pico) > reboot and system booted as it should be! :good:
So far so good, better than older ROM and it satisfied my requirement for daily driver.
Many thanks bro for keeping old Redmi Note 2 alive, even with Nougat. You;re the man. It will be perfect if Security Patch upgraded at least August 5, 2018.
Current security patch December 5, 2017 is too old!
Again, many thanks Azizb750.
Have a great day!
God bless you!
/***********
Now, current ROM is RR-5.8.5 20180828 build.
Launcher: Microsoft, Poco
Google Assistant, Google Photos, works just fine!
Rooted by Magisk 16.7 (1671). SafetyNet: invalid response.
Theme: Substratum, DNA Dark Project.
SOT: 2h 6m
xu3sno said:
Hi @Azizb750
First I read your post here: https://forum.xda-developers.com/showpost.php?p=77463249&postcount=1312
Coming from current RR Nougat ROM for hermes by Dinolek year ago, then I downloaded and clean installed RR-20180829 build and ended with bootloop
After you updated OP, I installed RR-20180828 build > opengapps (armv7, 7.1, pico) > reboot and system booted as it should be! :good:
So far so good, better than older ROM and it satisfied my requirement for daily driver.
Many thanks bro for keeping old Redmi Note 2 alive, even with Nougat. You;re the man. It will be perfect if Security Patch upgraded at least August 5, 2018.
Current security patch December 5, 2017 is too old!
Again, many thanks Azizb750.
Have a great day!
God bless you!
/***********
Now, current ROM is RR-5.8.5 20180828 build.
Launcher: Microsoft, Poco
Google Assistant, Google Photos, works just fine!
Rooted by Magisk 16.7 (1671). SafetyNet: invalid response.
Theme: Substratum, DNA Dark Project.
SOT: 2h 6m
Click to expand...
Click to collapse
Thanks a lot, BTW, about patches is something that came from the Custom ROM and I can't anything for it
DotOs installed, works perfectly thank you very much! An Oreo version soon? Otherwise it's already exellent to have gone from Lolipop to Nougat ?
VoxiBe said:
DotOs installed, works perfectly thank you very much! An Oreo version soon? Otherwise it's already exellent to have gone from Lolipop to Nougat ?
Click to expand...
Click to collapse
+1
Security patch level February 5, 2018! Newer than RR! :good:
However, I preferred RR 5.8.5 good: D
Thanks Azizb750! Thanks devs!
Have a great day!
Just tried crDroid 20180825 build. I like it so much as it's highly customizable as RR. Apart from that, it applied Security patch level July 5, 2018. :good:
It's most likely I prefer to use it as my daily driver.
However, wait until I give a try the other two hermes ROMs, LineageOS and Viper.
Again, thanks a lot Azizb750 for providing N ROMs for our obsolete device!
Have a great day!
Gave a try LineageOS 14.1 for hermes 20180828 build. Everything works just fine, according to my requirements. Sure, you may vary.
Feeling secured as Security patch from August 5, 2018! :good:
Many thanks to @Azizb750 and other devs! ?
Hope, you keep the security patch updated!
Have a great day!
I did try to install ViperOS 20180825, everything works just fine as described on OP.
Security patch of July 5, 2018.
After tried all available N ROMs as provided by OP, I decided to choose crDroid as my daily driver, based on:
1.Highly and easily customizable
2. Not so old security patch (July 5, 2018). Hopefully, Azizb750 will keep updated!
Have a great day!
xu3sno said:
I did try to install ViperOS 20180825, everything works just fine as described on OP.
Security patch of July 5, 2018.
After tried all available N ROMs as provided by OP, I decided to choose crDroid as my daily driver, based on:
1.Highly and easily customizable
2. Not so old security patch (July 5, 2018). Hopefully, Azizb750 will keep updated!
Have a great day!
Click to expand...
Click to collapse
Thanks a lot
But I will not keep them always updated as I would like to stop compiling for a while due of studies after october
But I would like to work on other roms too
viper OS
i tested viper OS, a better rom, smoothly, IR blaster also work well, but fm radio do not work and i cannot make "adb over wifi" work, i hope that can be fixed,thank u
obama88 said:
i tested viper OS, a better rom, smoothly, IR blaster also work well, but fm radio do not work and i cannot make "adb over wifi" work, i hope that can be fixed,thank u
Click to expand...
Click to collapse
adb over wifi doesnot work in Developer options, but third party app as "wifi adb" works after root
Tried latest updated LineageOS 14.1 20180901 and RR 5.8.5 20180901 build.
Security patch August 5, 2018 and December 5, 2017, respectively.
Workings and bugs as described on OP. However, Contacts can't sync, using both methods.
Reverted to crDroid
Anyway, thanks Azizb750 for keeping ROMs for hermes updated!
Have a great day!
Changelog:
-----------------
01092018 (LOS, DotOS and RR)
- Added some lines in ramdisk (for video recording)
- updated BoardConfig.mk
- added new keylayout (Thanks ARTEM)
- added new tweaks in build.prop for [email protected] (thanks @ibilux for help) and removed init.d script
-----------------
03092018 (ViperOS)
- Added some lines in ramdisk (for video recording)
- updated BoardConfig.mk
- added new keylayout (Thanks ARTEM)
- added new tweaks in build.prop for [email protected] (thanks @ibilux for help) and removed init.d script
- edited build.prop to make it debuggable
Click to expand...
Click to collapse
Feel crDroid left behind bro Azizb750!
Have a great day!
i clear all data and flash 03092018(ViperOS) rom, it's bootloop ,but 25082018(ViperOS) rom work,
flash 25082018(ViperOS) firstly, then donot clear data and flash 03092018(ViperOS) rom ,boot into system, but camera crash and adb over wifi still not work ,so 25082018(ViperOS) rom should be keep,until new rom stable