Related
Q&A for [ROM][Lollipop][Z3C] Cyanogenmod 12 - Nightly
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Lollipop][Z3C] Cyanogenmod 12 - Nightly. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Ciao Guys,
actually I have rEctiFy ROM with clockworkmod recovery..do I have to flash anyway the cyanogen boot.img ?
mauroalpha said:
Ciao Guys,
actually I have rEctiFy ROM with clockworkmod recovery..do I have to flash anyway the cyanogen boot.img ?
Click to expand...
Click to collapse
I think you do. I tried it once in cwm and it failed, it could also have been a different issue but it works fine with the boot.img of the zip. Just keep in mind to store the zip on the internal storage before you flash the kernel and after wiping it.and that the recovery menu is very dim, you should avoid bright conditions.
Video or pictures
I would like to see how the cyanogenmod works on the Z3 Compact. Could you send me a video or some pictures?
Thanks!
Lukas
I have still some problems with my bluetooth headset. The connection and the controlls works, but often i dont get sound.
supermanlovers said:
I have still some problems with my bluetooth headset. The connection and the controlls works, but often i dont get sound.
Click to expand...
Click to collapse
My Bluetooth headset was acting up when i had the built in equalizer (AudioFx) turned on , try to turn it off and see if it helps.
I also installed viper4android instead which is way better.
Thanks, this worked for me
2mal16 said:
I think you do. I tried it once in cwm and it failed, it could also have been a different issue but it works fine with the boot.img of the zip. Just keep in mind to store the zip on the internal storage before you flash the kernel and after wiping it.and that the recovery menu is very dim, you should avoid bright conditions.
Click to expand...
Click to collapse
I've just installed with cyano recovery, everything was fine..
I want to report that somethimes the mic recorder loss some seconds while i'm using it..i've just updated now the nightly
need to test it again
anyway i'm really happy, the phone for me is now really faster than the stock rom.
Camera button
Anyone figure out how to remap the camera button yet?
So i'm kind of a noob here I guess but I thought to install this one would need to have their device rooted (like I had) and I have it on my device working perfectly, the only problem is the phone is telling me that it is not rooted and thus not letting me use titanium backup and greenify etc.
Is it just me, or is the Auto Updater not rebooting to recovery after downloading the cm-12-20150214-NIGHTLY-z3c -
I did extract and ABD'flashed the boot.img
And theres still an issue with the LED brightness and audio engine wakeup ( Sound seems dim at first, and sometimes notification audio is skipped, almost like it is in hibernation and cant always get out of it ) , cant seem to find it in the fixlog or changelog either
I just got cm12 setup on my galaxy tab 8.4, the only issue i notice thus far is that im finding it impossible to set a different wallpaper on my lockscreen from my gallery pics... If i want to use one of my personal backgrounds i have to use the same as my homescreen. The only way to change just the lockscreen background is to pick one from a theme i downloaded but that option sucks because i never use theme backgrounds... Anyone have a workaround or is that something well have to wait on in another nightly? I was able to do this easily in cm11, just had to go to lockscreen in settings and themes and i could pick it there
kiliimanjaro said:
So i'm kind of a noob here I guess but I thought to install this one would need to have their device rooted (like I had) and I have it on my device working perfectly, the only problem is the phone is telling me that it is not rooted and thus not letting me use titanium backup and greenify etc.
Click to expand...
Click to collapse
Go to Settings, Developer Options, then a few settings from the top you will see "Root access", click it and choose "Apps and ADB" or just "Apps only" (if you don't use ADB).
After root access is enabled you can install SuperSU from the Play Store (or just use the CM root access if you don't want SuperSU).....
Thanks that worked perfectly!
Another problem though (or else me just being silly and overlooking something simple) that when I boot to recovery it brings up the Cyanogenmod Recovery and there is no option to Backup my files. The only options I have are to wipe everything or reboot.
kiliimanjaro said:
Thanks that worked perfectly!
Another problem though (or else me just being silly and overlooking something simple) that when I boot to recovery it brings up the Cyanogenmod Recovery and there is no option to Backup my files. The only options I have are to wipe everything or reboot.
Click to expand...
Click to collapse
When you flash boot.img from the nightly .zip file you get the CM Recovery. You are correct in that there is no backup option. Use Titanium or some other app to back up your stuff. You can also use a different recovery but you may run into a different problem where the phone identifies itself as "aries" and won't flash the ROM. The CM Recovery takes care of that problem.
Anyone found a fix to the dim notification led issue? I think its related to the CM recovery. Anyone that can confirm this issue aswell?
I have a tab pro 8.4 running cm12 latest nightlies and i cant get adblock plus to work on it. Ive tried everything. It ran beautifully on cm 11 but on cm12 it FCs either right after u launch it or sometimes i can almost get done downloading the site block list. I have the wifi only version of the sm-t320 if that helps. Any ideas anyone? Either a way to fix it or an alternative app?
jflow36 said:
I have a tab pro 8.4 running cm12 latest nightlies and i cant get adblock plus to work on it. Ive tried everything. It ran beautifully on cm 11 but on cm12 it FCs either right after u launch it or sometimes i can almost get done downloading the site block list. I have the wifi only version of the sm-t320 if that helps. Any ideas anyone? Either a way to fix it or an alternative app?
Click to expand...
Click to collapse
try adaway (the newest dev build version) from this thread: http://forum.xda-developers.com/showthread.php?t=2190753
I think it worked for me when i was running cm 12.
firsty said:
Anyone found a fix to the dim notification led issue? I think its related to the CM recovery. Anyone that can confirm this issue aswell?
Click to expand...
Click to collapse
+1. Loving it but the notification LED is basically invisible compared to the stock ROM. Anyone know of a fix for this?
A couple of issues I've run into is sometimes bluetooth audio gets sped-up so my music sounds like it is playing a 2x speed (Google play music) and I'm unable to activate any accessibility services (I can get into the cancel or ok screen but can't click ok). Anybody else have these or know a workaround?
I have been using V4A for some time on my Android devices... Now finally when the Z3C could be rooted without loosing the DRM keys I went for it... Everything works just fine after the root, but I am totally unavailable to get V4A to work for some reason. Anyone that have this working with a rooted Z3C and locked boot loader? If you have, how did you manage to do it?
reguser said:
I have been using V4A for some time on my Android devices... Now finally when the Z3C could be rooted without loosing the DRM keys I went for it... Everything works just fine after the root, but I am totally unavailable to get V4A to work for some reason. Anyone that have this working with a rooted Z3C and locked boot loader? If you have, how did you manage to do it?
Click to expand...
Click to collapse
On my Xperia Z it worked just fine with a locked BL, I don't see why it would require an unlocked BL. My BL on the Z3C is unlocked so I can't say anything about that.
What problems are you having?
Sent from my D5803
Thanks for your answer Dsteppa... Well, I have this rooted Z3C and downloaded the latest V4A together with BusyBox. The driver and BusyBox installs just fine and I'm able to change V4A under sound settings... But I can't get the V4A to work. Whatever changes I make to it there's no change in sound. E.g. on my S3 everything was working just fine.
reguser said:
Thanks for your answer Dsteppa... Well, I have this rooted Z3C and downloaded the latest V4A together with BusyBox. The driver and BusyBox installs just fine and I'm able to change V4A under sound settings... But I can't get the V4A to work. Whatever changes I make to it there's no change in sound. E.g. on my S3 everything was working just fine.
Click to expand...
Click to collapse
im on locked BL too and rootted and it works great , hop you have installed the drivers
pw1nce said:
im on locked BL too and rootted and it works great , hop you have installed the drivers
Click to expand...
Click to collapse
OK... I must be missing some fundamental configuration then... Did you only install BusyBox and then the V4A driver for it to work?
What ap are you using to listen to music? Don't forget to change V4A to your default MusicFX (Settings > Sound)
Dsteppa said:
What ap are you using to listen to music? Don't forget to change V4A to your default MusicFX (Settings > Sound)
Click to expand...
Click to collapse
Hi... I have changed settings and using BubbleUPnP. Also tried the Walkman app but no difference in sound
reguser said:
Hi... I have changed settings and using BubbleUPnP. Also tried the Walkman app but no difference in sound
Click to expand...
Click to collapse
Can you confirm that @ Settings > Sound > Music Effects V4A is default?
And did you enable V4A @ Headset/Phone Speaker/Bluetooth etc..
I have V4A installed, can confirm it works with bubbleUPNP and power amp. When you download the zip and extract it, make sure you install the largest file, then open and install the drivers. Then follow what Dsteppa said... It should work
Cheers ?
Dsteppa said:
Can you confirm that @ Settings > Sound > Music Effects V4A is default?
And did you enable V4A @ Headset/Phone Speaker/Bluetooth etc..
Click to expand...
Click to collapse
Hi and thanks once again for your concern... Yes, I have tried both the V4A FX and XHIFI and enabled them in Sound/M Effects and also enabled V4A for e.g. Headset. I've installed and used V4A on nearly 10 Android devices prior to this one without any issues at all. The strange thing is that I can see that the driver is active but not producing any change in sound... I also tried to reset the phone, also did the root process once more but the same result... Really strange as I see it.
reguser said:
Hi and thanks once again for your concern... Yes, I have tried both the V4A FX and XHIFI and enabled them in Sound/M Effects and also enabled V4A for e.g. Headset. I've installed and used V4A on nearly 10 Android devices prior to this one without any issues at all. The strange thing is that I can see that the driver is active but not producing any change in sound... I also tried to reset the phone, also did the root process once more but the same result... Really strange as I see it.
Click to expand...
Click to collapse
Hmm then the only thing I can think of is you asking in the V4A topic, they should be able to help you there. Because it should work without a problem.
I have the exact same problem, viper4android installed on my D5803, rooted with locked BL, but not working. After spending some time trying to figure it out i found out that it doesn't work with the Walkman app, with google play music it's working fine. Hope that helps. I'm curious if you guys got it working with the walkman app?
mykep said:
I have the exact same problem, viper4android installed on my D5803, rooted with locked BL, but not working. After spending some time trying to figure it out i found out that it doesn't work with the Walkman app, with google play music it's working fine. Hope that helps. I'm curious if you guys got it working with the walkman app?
Click to expand...
Click to collapse
Mine worked fine with Walkman, but I prefer PowerAmp (So I use that)
Thank you for your answer, after more digging around i found out that it's working with Walkman app too, but only on the phone speakers, it does not work with the headset. If you go to driver status (on headset) it says processing no, and it does nothing, you can't feel any difference, i have to mention that i use a pair of Sennheiser momentum in ear, and have not tested with anything else. On the phone speakers it says, processing yes, and it's working...
I bought the XPERIA Z3C for its native support of High Resolution Audio (HRA). This is the problem why it's not working for me... I found out that when playing a 24 bit FLAC file the V4A driver just won't process?! It worked fine on my Galaxy S3 (i9300) but not on this. 16 bits FLAC files play just fine, but when I play HRA files the sound processing just wont happen. I don't know if it's related to that it's a separeta DAC (Wolfson 1811) in the S3 and the Z3C uses the Qualcomm 801 with embedded DAC.
I'm having problems too.
Rooted my z3c especially for this and it's not working.
I've installed the drivers and then the app asks me to reboot, after the reboot I've entered the app and again, it asks me to install drivers like I never did.
Any idea on how to fix this?
Put V4A in compability mode and it will work probably
Roye_V said:
I'm having problems too.
Rooted my z3c especially for this and it's not working.
I've installed the drivers and then the app asks me to reboot, after the reboot I've entered the app and again, it asks me to install drivers like I never did.
Any idea on how to fix this?
Click to expand...
Click to collapse
it's because of your busybox, it's either not installed or not properly installed, had the same issue.
Hi can yous confirm if this increases ringtone volume?
It's because of your duel recovery and rooting method, if you install busy box it might most likely erase your recovery on xperia z3. It happened to me actually but Viper android fx will work, if you prefer Viper android fx and no recovery go 4 it and install busy box from Google play you do a backup then reinstall your recovery via computer then restore your data from the backup
If you have duel recovery on xperia z3 or z3c it most likely has a different busy box compatible with that recovery
---------- Post added at 04:46 PM ---------- Previous post was at 04:29 PM ----------
T_money_third said:
It's because of your duel recovery and rooting method, if you install busy box it might most likely erase your recovery on xperia z3. It happened to me actually but Viper android fx will work, if you prefer Viper android fx and no recovery go 4 it and install busy box from Google play you do a backup then reinstall your recovery via computer then restore your data from the backup
If you have duel recovery on xperia z3 or z3c it most likely has a different busy box compatible with that recovery
Click to expand...
Click to collapse
I solved Viper android fx not working with duel recovery on xperia z3 XD all I did was set selinux mode to permissive and it didn't ask me to install drivers again and again it works now
Hi
In latest open beta with Magisk 15.3 , used debloater and made space in system , but on flashing anything no error is there but nothing shows in app drawer , same is happening with Magisk also . Managed to flash viper but the drivers are not getting installed showing io error while same works fine for others without manual driver installation, no idea what's wrong !!!!
Yikes. Sounds like something is glitched in there. Try wiping : system and cache ( only )and reloading the rom and then rebooting into recovery and then booting up in system.
.
If it's still glitched ( ugg ) then its wipe all ( less external data ) and factory reset and start over.
.
Um, did you make yourself a nandroid backup ?
AKHIL.cochin said:
but on flashing anything no error is there but nothing shows in app drawer.
Click to expand...
Click to collapse
What do you mean by this? Do you mean that you don't see any apps after flashing a Magisk module? Many modules don't install any apps and you either don't have to do anything to configure or run a terminal command. What modules are you talking about?
Managed to flash viper but the drivers are not getting installed showing io error while same works fine for others without manual driver installation, no idea what's wrong !!!!
Click to expand...
Click to collapse
That's a known issue with V4A on OxygenOS Oreo. Some don't experience it though, which is incredibly frustrating...
Also what version of twrp r u using
old_fart said:
Yikes. Sounds like something is glitched in there. Try wiping : system and cache ( only )and reloading the rom and then rebooting into recovery and then booting up in system.
.
If it's still glitched ( ugg ) then its wipe all ( less external data ) and factory reset and start over.
.
Um, did you make yourself a nandroid backup ?
Click to expand...
Click to collapse
did a clean flash and checked , its still there , no idea whats wrong ..
Bradl79 said:
Also what version of twrp r u using
Click to expand...
Click to collapse
twrp-3.2.1-0
Didgeridoohan said:
What do you mean by this? Do you mean that you don't see any apps after flashing a Magisk module? Many modules don't install any apps and you either don't have to do anything to configure or run a terminal command. What modules are you talking about?
That's a known issue with V4A on OxygenOS Oreo. Some don't experience it though, which is incredibly frustrating...
Click to expand...
Click to collapse
" not only magisk , have u read my post , on flashing arise magnum on twrp also gave no errors and i selected viper , dolby , dolby atmos , xperia music etc and all flashed fine but none was showing in there thats what i have mentioned i also tried many viper and dolby modules in magisk , nothing s working "
AKHIL.cochin said:
" not only magisk , have u read my post , on flashing arise magnum on twrp also gave no errors and i selected viper , dolby , dolby atmos , xperia music etc and all flashed fine but none was showing in there thats what i have mentioned i also tried many viper and dolby modules in magisk , nothing s working "
Click to expand...
Click to collapse
Yes, I did read your post, but it was lacking in detail so I needed to ask some clarifying questions. Unfortunately, your answer is also somewhat lacking in detail...
But, I'm guessing you're trying to install some audio mods. V4A isn't working properly on OOS Oreo for the OP3T. A few users have it running fine, but it seems like those are a minority.
There are not that many Dolby mods that work on Oreo yet, so you might have to look around a bit to find one that does. There'll most likely be some more readily available soon though.
Didgeridoohan said:
Yes, I did read your post, but it was lacking in detail so I needed to ask some clarifying questions. Unfortunately, your answer is also somewhat lacking in detail...
But, I'm guessing you're trying to install some audio mods. V4A isn't working properly on OOS Oreo for the OP3T. A few users have it running fine, but it seems like those are a minority.
There are not that many Dolby mods that work on Oreo yet, so you might have to look around a bit to find one that does. There'll most likely be some more readily available soon though.
Click to expand...
Click to collapse
THE FRUSTRATING THING S ITS WORKING FOR ALL THE OTHERS WITHOUT ANY ISSUES IN SAME ROM KERNEL COMBO
AKHIL.cochin said:
THE FRUSTRATING THING S ITS WORKING FOR ALL THE OTHERS WITHOUT ANY ISSUES IN SAME ROM KERNEL COMBO
Click to expand...
Click to collapse
Yes, it's frustrating, but there's no need to shout. And it does NOT work for everyone else. I haven't had an audio mod working properly on my OP3T since updating to OOS 5+...
It works for some, but not for others. You could try the OOS beta. It seems like some have better luck with that.
Either you try to help, if possible, or you change to a working ROM combo, or you wait until someone finds a fix.
I had a problem that some modules wouldn't activate (they install successfully, but after reboot I would still see "module will be updated at next reboot"). As I didn't have time and will to debug this, I reverted to OOS 4.5.1.
It calling me all time for the driver. I do that every time and I give him magisk root to do that. Any suggestion?
Did i get here some help or not? Then i looking maybe for a other Forum...
Install as system app and allow it to install through the not recommended settings.
U now have to delete it and reinstall it.. Watch the instructions in the thread pls before you become sow passive agressive mate. It is not our fault, ok?
Use this module. Flash in Magisk manager. Choose latest driver, material app, system app, lib workaround, and choose no for the last. (I don't remember what was it)
Hi, I've a Mi9 and tried to install Viper4AndroidFx.. Installation ok, driver installed, but no effect.. tried to set all to highest value to ear some difference but nothing..
Uninstalled it, i tried Viper4Android Legacy, installed as system app and by magisk and chosen all installation option with up volume button..
But still no difference with the stock speaker.. can you help me?
I would like to encrease the volume during a calling. thanks bye
take a look on mi8 or mi a1 forum in xda, there is described exactly which modules in Magisk must be installed to allow a proper function of the ViperFX. Still bootloader locked, so I cannot support by then.
catalindobre said:
take a look on mi8 or mi a1 forum in xda, there is described exactly which modules in Magisk must be installed to allow a proper function of the ViperFX. Still bootloader locked, so I cannot support by then.
Click to expand...
Click to collapse
my bootloader is unlocked to flash magisk, why it doesn't works with unlocked bootloader?
nikzodiac said:
my bootloader is unlocked to flash magisk, why it doesn't works with unlocked bootloader?
Click to expand...
Click to collapse
It only works with unlocked BL ofc. Did you tried installing "Audio Modification Library", and "Audio Compatibility Patch" from Magisk repo?
darek1995 said:
It only works with unlocked BL ofc. Did you tried installing "Audio Modification Library", and "Audio Compatibility Patch" from Magisk repo?
Click to expand...
Click to collapse
no, what I've to do exactly? I'm not an expert of modding.. thanks
make sure to have installed Magisk Manager, also latest Magisk root installed via TWRP. After this it should be pretty simple, look for the afore mentioned modules in Magisk install them one by one (each single one might require a reboot). After installing them you may install ViperFX, (version 2.3.4 as a system app).
catalindobre said:
make sure to have installed Magisk Manager, also latest Magisk root installed via TWRP. After this it should be pretty simple, look for the afore mentioned modules in Magisk install them one by one (each single one might require a reboot). After installing them you may install ViperFX, (version 2.3.4 as a system app).
Click to expand...
Click to collapse
hi, I tried to do everything you said, no one difference..
in a few days when the unlocking time will end will try it myself and in case will make it work, I will post here the process steps.
You have to install the legacy version with lib workaround. For me its working or you can try the rootless version from team_dewitt (look here in xda for it) you only need twrp and init.d injector.
Try this one.
https://forum.xda-developers.com/android/apps-games/app-viper4android-fx-2-6-0-0-t3774651
Just to install the apk, nothing else.
Working here like a charm
Hi, I tried the version linked by pokko, it works, but I can't find the way to encrease volume, it works just to have a lower volume, If I set the master volume value higher it doesn't encrease, seems like the stock volume.. is there a way to have an higher volume for the speakers?
thanks
2.7.0/2.7.1 working great on MIUI but with GSI roms it's a different story
if someone can tell me how to get an higher volume please let me know soon.. I'm really thinking to remove root frome my phone.. I've found no one good reason to have it, I don't want to change rom, so I did it just to have 3 things: adaway, encrease volume and use ps3 controller with bluetooth...
adaway doesn't block anything in site that I tried it,
with viper4android my speaker volume is still the same..
miui seems not compatible with ps3 controller.. sixaxis compatibility checker can't works with bluetooth..
the only good thing I've found is the modded youtube version with no ads and background player.. but I've seen exist a versione for no rooted phones too..
Hi,
Now they fixed the fingerprint in the ç27 update. I rooted my x2pro again with Magisk 20.4 So far so good.
Now I really wanted my viper4android Android back, but I get a bootloop when activating the driver.
I tried the aml patch but no luck so far.
Anybody tried this with success?
Luckily it's easy to undo the install in TWRP.
Just run the zip file and it would uninstall v4a.
Hellsblade said:
Hi,
Now they fixed the fingerprint in the ç27 update. I rooted my x2pro again with Magisk 20.4 So far so good.
Now I really wanted my viper4android Android back, but I get a bootloop when activating the driver.
I tried the aml patch but no luck so far.
Anybody tried this with success?
Luckily it's easy to undo the install in TWRP.
Just run the zip file and it would uninstall v4a.
Click to expand...
Click to collapse
I managed to get v4a working again after hours trying different methods
Install magisk
Get the aml and v4a rootless zip version here https://zackptg5.com/android.php not from magisk repo
First install AML through magisk install complete don't reboot now got recovery install v4a rootless zip when install complete reboot
After that install v4a apk xda labs version https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Now you have working v4a c 27 update
Wow great.
It works again. I'm what they call a happy camper ?
NB: My setup picture for my Sony WF1000 in ears. I use an old studer.irs for convolver. 2 ms deferential sound. Balance a little to left for compensation and viper clarity natural...
Thanks for helping me out.
Good evening, you can tell me how I update my realme x2pro to c27 and the rooted, I'm on the c11 rooted version and twrp installed, I did not want to update it to Android 10 not to lose the fingerprint, but now that they are fixed the problem on c27 I would like to update it. If there's someone who can help me and give me a link to a tutorial, I haven't found here on xda a tutorial that explains the root and installation of twrp. Thank you
---------- Post added at 01:45 AM ---------- Previous post was at 01:44 AM ----------
Hellsblade said:
Hi,
Now they fixed the fingerprint in the ç27 update. I rooted my x2pro again with Magisk 20.4 So far so good.
Now I really wanted my viper4android Android back, but I get a bootloop when activating the driver.
I tried the aml patch but no luck so far.
Anybody tried this with success?
Luckily it's easy to undo the install in TWRP.
Just run the zip file and it would uninstall v4a.
Click to expand...
Click to collapse
Good evening, you can tell me how I update my realme x2pro to c27 and the rooted, I'm on the c11 rooted version and twrp installed, I did not want to update it to Android 10 not to lose the fingerprint, but now that they are fixed the problem on c27 I would like to update it. If there's someone who can help me and give me a link to a tutorial, I haven't found here on xda a tutorial that explains the root and installation of twrp. Thank you
Aze0077 said:
I managed to get v4a working again after hours trying different methods
Install magisk
Get the aml and v4a rootless zip version here https://zackptg5.com/android.php not from magisk repo
First install AML through magisk install complete don't reboot now got recovery install v4a rootless zip when install complete reboot
After that install v4a apk xda labs version https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Now you have working v4a c 27 update
Click to expand...
Click to collapse
This should not disable stock dolby atmos options right?
adsubzero said:
This should not disable stock dolby atmos options right?
Click to expand...
Click to collapse
No it doesn't, but I turn it off anyway because it's adding a bit too much for my liking.
Hellsblade said:
No it doesn't, but I turn it off anyway because it's adding a bit too much for my liking.
Click to expand...
Click to collapse
Ah yeah I mean I like to use the movie preset when playing though speakers, so that's great.
Do you guys have any issues with system sounds and ringtone? If I'm not using a convolver it's fine, but with convolver active there are unusual sound glitches and audio pops.
adsubzero said:
Do you guys have any issues with system sounds and ringtone? If I'm not using a convolver it's fine, but with convolver active there are unusual sound glitches and audio pops.
Click to expand...
Click to collapse
No problems with system sounds here.
I'm using convolver with studer -1db irs.And output gain on minus 6.
Hellsblade said:
No problems with system sounds here.
I'm using convolver with studer -1db irs.And output gain on minus 6.
Click to expand...
Click to collapse
Could you please go into sound settings and then change the media volume slider so it plays that short sound? Nothing weird happens for you?
adsubzero said:
Could you please go into sound settings and then change the media volume slider so it plays that short sound? Nothing weird happens for you?
Click to expand...
Click to collapse
Yep there is always a bit of lag before the driver kick's in when playing media audio. Also when you start playing music. I don't think there's a solution for that.
I think I just got used ?
Hellsblade said:
Yep there is always a bit of lag before the driver kick's in when playing media audio. Also when you start playing music. I don't think there's a solution for that.
I think I just got used ?
Click to expand...
Click to collapse
Ah yes that's the thing, but the problem is when receiving notifications from different apps.
For instance I get a notification from Viber and there's a slight pop, but then I receive a notification from Facebook and first it plays the remaining sound from Viber then from FB and it sounds really messed up.
It's sad if there's no solution, but I guess I'll keep investigating.
Though I don't think there's no solution, since this always worked fine for me, previously on Nexus 6P, LG V30 and HTC 10.
Btw, my suggestion for the SRS_1_1_Normal_stereo.irs convolver.
Edit the EQ to something like -2dB for the bass freq and -4dB for 4KHz, the rest is up to you.
It gives incredible deep bass and better bass response to the speakers.
Edit: the partial solution for the mentioned issue is to enable attach audio effects option in V4A. I'm not sure if it works for every audio player, but it works with Poweramp. What it does is it disables V4A processing for everything but the music player. The drawback to this is when I'm listening to something in Poweramp and want to play something eg. on YouTube, there is no sound at first. It works okay when I stop/close poweramp. For my usage this is kind of fine I guess, so I thought I would share.
hello everyone and thanks for the explanation everything works correctly now
I don't know if it only happens to me or if it is normal, when I close the multitasking v4a application it stops working, I tried turning it into a system application but the same thing happens, can you help me with that question?
Aze0077 said:
I managed to get v4a working again after hours trying different methods
Install magisk
Get the aml and v4a rootless zip version here https://zackptg5.com/android.php not from magisk repo
First install AML through magisk install complete don't reboot now got recovery install v4a rootless zip when install complete reboot
After that install v4a apk xda labs version https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Now you have working v4a c 27 update
Click to expand...
Click to collapse
why i cant find xda version apk anywhere ? other versions doesnt work
peymanbeyraghi said:
why i cant find xda version apk anywhere ? other versions doesnt work
Click to expand...
Click to collapse
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
thanks , i have fixed it , i forget to install selinux on magisk . after that all versions works fine .
Aze0077 said:
I managed to get v4a working again after hours trying different methods
Install magisk
Get the aml and v4a rootless zip version here https://zackptg5.com/android.php not from magisk repo
First install AML through magisk install complete don't reboot now got recovery install v4a rootless zip when install complete reboot
After that install v4a apk xda labs version https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Now you have working v4a c 27 update
Click to expand...
Click to collapse
Hey, I have used this method previously to install V4A, but I can't get it working anymore. After trying out custom ROMs, I've gone back to clean RUI 1.0 C38, and following the same steps the V4A doesn't work. Has anyone found a reliable way to install V4A?