Accidentally flashed a file to root that was for KitKat (Im on Lollipop) - X 2014 Q&A, Help & Troubleshooting

So I accidentaly flashed the wrong root file thus making my systemui continuously crash. Any suggestions as to what I can do?

shahrukhraza said:
So I accidentaly flashed the wrong root file thus making my systemui continuously crash. Any suggestions as to what I can do?
Click to expand...
Click to collapse
Stock recovery or TWRP?
Are you looking to undo what you did without having to do a complete wipe, or are you open to more drastic solutions? Because you can always run the toolkit to reset to complete stock by flashing the stock images over your current system. But that would of course perform a complete wipe.

Paddington said:
Stock recovery or TWRP?
Are you looking to undo what you did without having to do a complete wipe, or are you open to more drastic solutions? Because you can always run the toolkit to reset to complete stock by flashing the stock images over your current system. But that would of course perform a complete wipe.
Click to expand...
Click to collapse
I dont really mind a complete wipe. And are you referring to this toolkit? http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3048099
if not could you please tell me which one?
And to clarify, I followed this tutorial: https://www.youtube.com/watch?v=_fPIYhzWlnw . The file that I flashed to attempt to root is in the description of that.

shahrukhraza said:
I dont really mind a complete wipe. And are you referring to this toolkit? http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3048099
if not could you please tell me which one?
And to clarify, I followed this tutorial: https://www.youtube.com/watch?v=_fPIYhzWlnw . The file that I flashed to attempt to root is in the description of that.
Click to expand...
Click to collapse
I actually used this one: http://forum.xda-developers.com/moto-x-2014/development/tool-moto-x-pure-edition-recovery-t2897819 when I was messed around, but I would imagine either would work. When I needed to return to unrooted stock, I believe that toolkit returned me to 4.4.4 unrooted stock, then I just ran the 5.0 OTA once the phone booted up.
The toolkit you referenced is the one I used to unlock the bootloader, flash TWRP, and root my phone. As long as you can get to recovery or fastboot, either toolkit should work to return you to stock. BUT I caution you, I have a pure edition, and these toolkits were made for the pure edition. If you do not have a pure edition, you'll want to read the disclaimers/instructions/other posts to make sure it will work on your phone.

Okay so this escalated quickly.
So here I am being my dumb self , I try to flash TWRP. That goes fine and then I try to wipe my data. After that I reboot it and as its turning on it foes black on the boot animation. and now I cant even get into freaking recovery mode. I dont know what I did but im pretty sure I messed up bad. I need some serious help now and anything is appreciated.

Paddington said:
I actually used this one: http://forum.xda-developers.com/moto-x-2014/development/tool-moto-x-pure-edition-recovery-t2897819 when I was messed around, but I would imagine either would work. When I needed to return to unrooted stock, I believe that toolkit returned me to 4.4.4 unrooted stock, then I just ran the 5.0 OTA once the phone booted up.
The toolkit you referenced is the one I used to unlock the bootloader, flash TWRP, and root my phone. As long as you can get to recovery or fastboot, either toolkit should work to return you to stock. BUT I caution you, I have a pure edition, and these toolkits were made for the pure edition. If you do not have a pure edition, you'll want to read the disclaimers/instructions/other posts to make sure it will work on your phone.
Click to expand...
Click to collapse
Yessir thanks for replying. However I now have a whole new problem. Do you have any suggestions for that? It is the post above^

shahrukhraza said:
Okay so this escalated quickly.
So here I am being my dumb self , I try to flash TWRP. That goes fine and then I try to wipe my data. After that I reboot it and as its turning on it foes black on the boot animation. and now I cant even get into freaking recovery mode. I dont know what I did but im pretty sure I messed up bad. I need some serious help now and anything is appreciated.
Click to expand...
Click to collapse
Hey thats an easy fix just load into the boatloader and reflash the rom through mfastboot
edit: you should be able to get all the files you need from his website http://forum.xda-developers.com/moto-x-2014/general/ota-pure-edition-lollipop-5-0-t2932625

ewalk4866 said:
Hey thats an easy fix just load into the boatloader and reflash the rom through mfastboot
edit: you should be able to get all the files you need from his website http://forum.xda-developers.com/moto-x-2014/general/ota-pure-edition-lollipop-5-0-t2932625
Click to expand...
Click to collapse
Bootloader as in vol. down + power button right? Thats not working too. I also tried other combinations to no luck. And before it was turning on but now its not even booting to the boot animation. Thanks for the link though, if it does magically boot into the bootloader then i'll know what to do at least.
Edit: Okay so theres the charging animation, so thats a start, I guess. Still no luck on the bootloader tho.

Okay got it into bootloader mode!
Now before I do any other stupid thing can somebody just confirm one thing for me? On Graffix's website, this is the img I should flash through mfastboot right
Lollipop 5.0 22.21.11 FULL IMAGE PACKAGE Zip
Just a confirmation because I dont really trust my judgement. Thanks again everybody

shahrukhraza said:
Okay got it into bootloader mode!
Now before I do any other stupid thing can somebody just confirm one thing for me? On Graffix's website, this is the img I should flash through mfastboot right
Lollipop 5.0 22.21.11 FULL IMAGE PACKAGE Zip
Just a confirmation because I dont really trust my judgement. Thanks again everybody
Click to expand...
Click to collapse
Yes that's right remember you only have to flash system

Sorry that my Toolkit suggestion messed you up. I really thought that solution would work, not make it worse.

Paddington said:
Sorry that my Toolkit suggestion messed you up. I really thought that solution would work, not make it worse.
Click to expand...
Click to collapse
Toolkit are never really a good idea it just makes people lazy and not learn how to flash or fix problems on there own.

Paddington said:
Sorry that my Toolkit suggestion messed you up. I really thought that solution would work, not make it worse.
Click to expand...
Click to collapse
Nah man that didnt mess it up, some other stupid thing did it lol. Nothing on you, rather thanks for the help.

ewalk4866 said:
Toolkit are never really a good idea it just makes people lazy and not learn how to flash or fix problems on there own.
Click to expand...
Click to collapse
I agree that Toolkits can make you lazy and not learn how to fix things on your own, but when you need a quick fix and don't have time to figure out what is going wrong, it's always nice to just boot your phone into fastboot or recovery and fix things with a few keystrokes on your computer.

I got it to work guys! Thanks for all the help. It was much appreciated.

Related

[Q] HTC First doesnt bootup..Urgent help needed !!

Dear experts, I have seen similar threads as with the issue I am facing but I wasnt sure of few parts and if the process as a whole could work for me.
Here's what I know and what the problem is all about, appreciate any help to get back the phone in working condition.
First the basics:
HTC first
GSM unlocked, Bootloader unlocked and TWRP installed
I wanted to delete and format the device as I intended to give this to my friend and I did go to TWRP menu and then clicked on advanced wipe etc and realized I did erase everything the phone needs even to bootup. This I have done without taking backup.
What it looks like now:
When I boot the device out from TWRP, the 'F' logo comes up and stays like that for ever. If I go to TWRP pressing the power and volume down together, it goes to the TWRP menu and thats it..no options seem to help me on this screen to go past the 'F' logo at startup. If I simply power down the device on the 'F' screen it restarts and goes to the same screen making it look like its in a loop. Not sure if this is called soft-brick or hard-brick but it looks like the phone is of no use to me right now.
Can you guys please help me with resolving the problem..any help will be much appreciated
kuldeep_ch said:
Dear experts, I have seen similar threads as with the issue I am facing but I wasnt sure of few parts and if the process as a whole could work for me.
Here's what I know and what the problem is all about, appreciate any help to get back the phone in working condition.
First the basics:
HTC first
GSM unlocked, Bootloader unlocked and TWRP installed
I wanted to delete and format the device as I intended to give this to my friend and I did go to TWRP menu and then clicked on advanced wipe etc and realized I did erase everything the phone needs even to bootup. This I have done without taking backup.
What it looks like now:
When I boot the device out from TWRP, the 'F' logo comes up and stays like that for ever. If I go to TWRP pressing the power and volume down together, it goes to the TWRP menu and thats it..no options seem to help me on this screen to go past the 'F' logo at startup. If I simply power down the device on the 'F' screen it restarts and goes to the same screen making it look like its in a loop. Not sure if this is called soft-brick or hard-brick but it looks like the phone is of no use to me right now.
Can you guys please help me with resolving the problem..any help will be much appreciated
Click to expand...
Click to collapse
Sideload the stock rom and then flash it I've been in your situation and that's all that was needed to be done.
Be sure to also flash the boot.img if you aren't s-off
More questions
Thanks Abraham for your quick response.
I am starter with Android so, please help me how to sideload and also on where to get stock rom. I will also be lying if I said I understood whats s-off..? Please help further
Thanks
abrahammmmmmm_ said:
Sideload the stock rom and then flash it I've been in your situation and that's all that was needed to be done.
Be sure to also flash the boot.img if you aren't s-off
Click to expand...
Click to collapse
S-ON it is
I have checked on HBOOT screen and its S-ON
kuldeep_ch said:
I have checked on HBOOT screen and its S-ON
Click to expand...
Click to collapse
No problem! just be sure to hit that thanks button
Well then you'll have to make sure you flash the boot.IMG as well,
So what you'll do is
1) find the stock ROM around these threads
2) sideload the ROM
3) flash it
4) flash the boot.IMG inside the rom
5) you're done!
Understanding what s-on/off won't be of use here really d:
And the stock ROM is somewhere around these threads. About the side loading you might find a tutorial for that on YouTube. Sorry if it seems that I'm just leaving you in the dust but I am typing this in a hurry since it's 2:50 am at my place. I will be back to whip up a tutorial for you if YouTube wasn't of much help
Okay
Let me try my best till its like a more sociable time for you tomm morning, I will post my updates on the thread on how far I go and any questions I may have..
abrahammmmmmm_ said:
Well then you'll have to make sure you flash the boot.IMG as well,
So what you'll do is
1) find the stock ROM around these threads
2) sideload the ROM
3) flash it
4) flash the boot.IMG inside the rom
5) you're done!
If you need help with a tutorial or need me to go in depth with something it'll be quite a while from now because it's 2:40 am at my place. I'll assume you're a more advanced user since you've already got twrp and sound like you know what you're talking about
Click to expand...
Click to collapse
kuldeep_ch said:
Let me try my best till its like a more sociable time for you tomm morning, I will post my updates on the thread on how far I go and any questions I may have..
Click to expand...
Click to collapse
Yeah, just be sure not to wonder off too far from these threads on to other forums and flash or do something that can brick the device
Oh and btw I edited my post bc I saw your othe reply stating that you aren't all that too advanced with this
boot.img
I should be finding the boot.img on the stock ROM itself, isnt it..?
kuldeep_ch said:
Let me try my best till its like a more sociable time for you tomm morning, I will post my updates on the thread on how far I go and any questions I may have..
Click to expand...
Click to collapse
kuldeep_ch said:
I should be finding the boot.img on the stock ROM itself, isnt it..?
Click to expand...
Click to collapse
That's correct. Unzip the ROM and it should be there
This is how far I could get
Got all stock ROM and the IMG files, installed android SDK
ADB doesnt recognize the device to copy the file for sideloading
Guess issue is with the fact USB debugging was disabled earlier on my device
Can you please advise further
Is it better to chat on google chat or something so its even faster and I could get this fixed tonight (my time)
Thank you
Finally got it fixed
Thanks for the help..it all worked fine and the device is now working fine..
Thanks for all the guidance
kuldeep_ch said:
Got all stock ROM and the IMG files, installed android SDK
ADB doesnt recognize the device to copy the file for sideloading
Guess issue is with the fact USB debugging was disabled earlier on my device
Can you please advise further
Is it better to chat on google chat or something so its even faster and I could get this fixed tonight (my time)
Thank you
Click to expand...
Click to collapse
kuldeep_ch said:
Thanks for the help..it all worked fine and the device is now working fine..
Thanks for all the guidance
Click to expand...
Click to collapse
Great! Sorry I was away but it was getting very late. I'm glad everything worked out tho
kuldeep_ch said:
Got all stock ROM and the IMG files, installed android SDK
ADB doesnt recognize the device to copy the file for sideloading
Guess issue is with the fact USB debugging was disabled earlier on my device
Can you please advise further
Is it better to chat on google chat or something so its even faster and I could get this fixed tonight (my time)
Thank you
Click to expand...
Click to collapse
wait a sec...you dont have a rom or kernel on your device at the moment right?
then there is no way to turn on usb debug on or off cause there is nothing managing the device.
um...use cmd and do adb devices. if its not there then i have no idea but if fast-boot goes into usb mode try flasing it using code
not sure what you would use, but see if "fastboot flash update nameofROM.zip"
but im not sure if that is the right code
stock rom for htc first
kuldeep_ch said:
Got all stock ROM and the IMG files, installed android SDK
ADB doesnt recognize the device to copy the file for sideloading
Guess issue is with the fact USB debugging was disabled earlier on my device
Can you please advise further
Is it better to chat on google chat or something so its even faster and I could get this fixed tonight (my time)
Thank you
Click to expand...
Click to collapse
can you provide a stock rom for htc first because i am having a same issue as yours ........ mine is s off too .....
abrahammmmmmm_ said:
No problem! just be sure to hit that thanks button
Well then you'll have to make sure you flash the boot.IMG as well,
So what you'll do is
1) find the stock ROM around these threads
2) sideload the ROM
3) flash it
4) flash the boot.IMG inside the rom
5) you're done!
Understanding what s-on/off won't be of use here really d:
And the stock ROM is somewhere around these threads. About the side loading you might find a tutorial for that on YouTube. Sorry if it seems that I'm just leaving you in the dust but I am typing this in a hurry since it's 2:50 am at my place. I will be back to whip up a tutorial for you if YouTube wasn't of much help
Click to expand...
Click to collapse
can you please provide a tutorial and and all the link because i m kinda noob . I am unable to find them .

[Q] URGENT Device boot loop I need urgent help please

I am on my. Way to return the phone to best buy. I was rooted and with an unlocked bootloader and had TWRP. I used the Nexus Toolkit and relocked the phone before flashing stock and now it won't boot. It just shows the team win logo flashing over and over. Please please help as they close in 30 minutes. Also it isn't detected in adb or fast boot.
EDIT: fixed it!
I am at this same point. How did you fix it?
chris23445 said:
I am on my. Way to return the phone to best buy. I was rooted and with an unlocked bootloader and had TWRP. I used the Nexus Toolkit and relocked the phone before flashing stock and now it won't boot. It just shows the team win logo flashing over and over. Please please help as they close in 30 minutes. Also it isn't detected in adb or fast boot.
EDIT: fixed it!
Click to expand...
Click to collapse
TheAnarchist1 said:
I am at this same point. How did you fix it?
Click to expand...
Click to collapse
Going to assume he managed to Re-flash factory images.
Moral of this story is don't use toolkits and learn how to recover from bootloops and read about potential problems that could arise.
ADB is your friend!
TheAnarchist1 said:
I am at this same point. How did you fix it?
Click to expand...
Click to collapse
Hold the power and volume down button until it boots into recovery. Then plug the phone into your computer. Download the stock 5.0.1 zip (luckily I already had it downloaded). Use the toolkit and unlock the bootloader. It will say its successful but the phone will boot loop again. Boot into recovery and should say the bootloader is unlocked. Then flash the stock zip file and it should work! I had to figure it all out as I went because I couldn't figure it out online lol.
radicalisto said:
Moral of this story is don't use toolkits and learn how to recover from bootloops and read about potential problems that could arise.
Click to expand...
Click to collapse
To be fair, I was in a huge rush and relocked the bootloader before flashing stock. Totally a user error and not a toolkit error.
Boot loops
radicalisto said:
Going to assume he managed to Re-flash factory images.
Moral of this story is don't use toolkits and learn how to recover from bootloops and read about potential problems that could arise.
Click to expand...
Click to collapse
Or, the moral is follow the toolkit developer's directions.......
aiiee said:
Or, the moral is follow the toolkit developer's directions.......
Click to expand...
Click to collapse
Yep. That/don't rush when resetting the phone and do it in the wrong order.
aiiee said:
Or, the moral is follow the toolkit developer's directions.......
Click to expand...
Click to collapse
No, it isn't because...
chris23445 said:
I had to figure it all out as I went because I couldn't figure it out online lol.
Click to expand...
Click to collapse
but if a toolkit had never been used in the first place, there would be nothing to figure out as it would all have been learned in the rooting process.
rootSU said:
No, it isn't because...
but if a toolkit had never been used in the first place, there would be nothing to figure out as it would all have been learned in the rooting process.
Click to expand...
Click to collapse
No lol I would have completely been screwed without the toolkit. All that happened was I did the steps wrong and I have no idea how to unlock the bootloader and relock it and root with adb and the toolkit was easier for me. I could have googled the adb thing but it would have been much more of a hassle.
chris23445 said:
No lol I would have completely been screwed without the toolkit. All that happened was I did the steps wrong and I have no idea how to unlock the bootloader and relock it and root with adb and the toolkit was easier for me. I could have googled the adb thing but it would have been much more of a hassle.
Click to expand...
Click to collapse
Thus proving my point.
radicalisto said:
Going to assume he managed to Re-flash factory images.
Moral of this story is don't use toolkits and learn how to recover from bootloops and read about potential problems that could arise.
Click to expand...
Click to collapse
rootSU said:
Thus proving my point.
Click to expand...
Click to collapse
Not in the slightest . Your analysis is flawed. You assume this problem was caused by not understanding the underlying structure but it wasn't. It was caused by failing to follow directions. Which would have caused him problems had he used ADB or not.
aiiee said:
Not in the slightest . Your logic is skewed. Good luck with that.
Click to expand...
Click to collapse
How is it skewed? If, when he first got his phone, he unlocked and rooted in the normal way and not used a toolkit. He would have known how to use fastboot, including how to flash stock and lock the boot loader. He would not have used a toolkit today and wouldn't have used the wrong order and this thread wouldn't exist.
If you're an advocate for the cheat way and the way that makes it harder for us to help people, so be it. But 95%.of us prefer users to learn things properly and not become a burden to the forum. But you can help them all. Good luck with that.
chris23445 said:
No lol I would have completely been screwed without the toolkit. All that happened was I did the steps wrong and I have no idea how to unlock the bootloader and relock it and root with adb and the toolkit was easier for me. I could have googled the adb thing but it would have been much more of a hassle.
Click to expand...
Click to collapse
how to properly root.
1. run the command "fastboot oem unlock" in fastboot. this unlocks your bootloader.
2. flash a custom recovery via fastboot.
3. flash the latest supersu in your new recovery.
4. reboot with root.
5. woohoo!
this takes about 3-5 minutes.
aiiee said:
Which would have caused him problems had he used ADB or not.
Click to expand...
Click to collapse
Adb is absolutely nothing to do with any of this. Another misconception of toolkit users. Which again, proves my point.
aiiee said:
Not in the slightest . Your analysis is flawed. You assume this problem was caused by not understanding the underlying structure but it wasn't. It was caused by failing to follow directions. Which would have caused him problems had he used ADB or not.
Click to expand...
Click to collapse
you dont use adb to root. nor will adb work while you are in the bootloader. fastboot is what you use
simms22 said:
you dont use adb to root. nor will adb work while you are in the bootloader. fastboot is what you use
Click to expand...
Click to collapse
You can use adb. Fastboot is used for the oem i lock and recovery flash. If you want to put the supersu file on the phone without downloading it on the phone you can just adb push and flash in recovery. Done.
Thanks
chris23445 said:
Hold the power and volume down button until it boots into recovery. Then plug the phone into your computer. Download the stock 5.0.1 zip (luckily I already had it downloaded). Use the toolkit and unlock the bootloader. It will say its successful but the phone will boot loop again. Boot into recovery and should say the bootloader is unlocked. Then flash the stock zip file and it should work! I had to figure it all out as I went because I couldn't figure it out online lol.
To be fair, I was in a huge rush and relocked the bootloader before flashing stock. Totally a user error and not a toolkit error.
Click to expand...
Click to collapse
Thanks for the clear explanation.:good:
@rootSU
For those curious. I figured I would check back in with this thread. I did not use a toolkit to begin with. I have the sdk properly set up and know my fastboot and adb commands and the difference between both. What I did:
1. Fastboot oem unlock
2. Fastboot flash recovery recovery.img (it was twrp)
3. Booted into recovery and it would not let me access the recovery, just kept flashing the TWRP splash over and over and over.
The issue I think for me, was that I did not wait until the Nexus had wiped itself and booted back into Android to rebuild the file system. Hence TWRP farting out. I simply started from scratch again, flashed all the proper stuff that was needed and followed steps, and I was alright after that.
I have since returned the device though and exchanged it with a new Nexus 6, because my back cover had started to pop up in the top right corner above the power and volume buttons....but THAT is another story for another thread : p
Cheers all!
PS: It has been a while since I have owned a Nexus device, hence my own failure to follow the rules. Things have changed a bit with this Nexus it seems, and it was my fault. I am all good now though (or I will be after I set up this new Nexus 6)
PSS: No toolkits were used, or will ever be used in the creation and resolution of this debacle. My life is hard enough without blindly wandering through the forest of Android customization with my hand held by a complete stranger.
: p
TheAnarchist1 said:
@rootSU
For those curious. I figured I would check back in with this thread. I did not use a toolkit to begin with. I have the sdk properly set up and know my fastboot and adb commands and the difference between both. What I did:
1. Fastboot oem unlock
2. Fastboot flash recovery recovery.img (it was twrp)
3. Booted into recovery and it would not let me access the recovery, just kept flashing the TWRP splash over and over and over.
The issue I think for me, was that I did not wait until the Nexus had wiped itself and booted back into Android to rebuild the file system. Hence TWRP farting out. I simply started from scratch again, flashed all the proper stuff that was needed and followed steps, and I was alright after that.
I have since returned the device though and exchanged it with a new Nexus 6, because my back cover had started to pop up in the top right corner above the power and volume buttons....but THAT is another story for another thread : p
Cheers all!
PS: It has been a while since I have owned a Nexus device, hence my own failure to follow the rules. Things have changed a bit with this Nexus it seems, and it was my fault. I am all good now though (or I will be after I set up this new Nexus 6)
PSS: No toolkits were used, or will ever be used in the creation and resolution of this debacle. My life is hard enough without blindly wandering through the forest of Android customization with my hand held by a complete stranger.
: p
Click to expand...
Click to collapse
after fastboot oem unlock, you have to reboot once before flashing the recovery. rarely it doesnt stick, so you just flash it again if nothing appears

stuck in boot loop android is starting optimizing apps after update

sorry if this has been covered but i cant find anything the same as my situation and im pretty stuck.
I have just bought a nexus 6 and the phone prompted me to update to 5.1 so i have, once it restarted i am now stuck in a boot loop with it saying optimizing apps then restarts and the same again, i have tried booting into recovery and wipe data but just get the same.
I have tried using nexus root toolkit (wugsfresh) however cannot find fastboot connectivity so im stuck there.
The phone is not rooted and i cant seem to get access through adb ( i have not turned usb debugging on as the phone is new)
I really am not too clued up so im sorry if i need things explaining abit more.
Thanks in advance
viper1402 said:
sorry if this has been covered but i cant find anything the same as my situation and im pretty stuck.
I have just bought a nexus 6 and the phone prompted me to update to 5.1 so i have, once it restarted i am now stuck in a boot loop with it saying optimizing apps then restarts and the same again, i have tried booting into recovery and wipe data but just get the same.
I have tried using nexus root toolkit (wugsfresh) however cannot find fastboot connectivity so im stuck there.
The phone is not rooted and i cant seem to get access through adb ( i have not turned usb debugging on as the phone is new)
I really am not too clued up so im sorry if i need things explaining abit more.
Thanks in advance
Click to expand...
Click to collapse
flash a factory image, your update went no good. if you havent ever done this, i DO NOT RECOMMEND using a toolkit. toolkits are good for people who know what they are doing. if you dont kniw, you will remain clueless, and could make things much worse.
simms22 said:
flash a factory image, your update went no good. if you havent ever done this, i DO NOT RECOMMEND using a toolkit. toolkits are good for people who know what they are doing. if you dont kniw, you will remain clueless, and could make things much worse.
Click to expand...
Click to collapse
am i able to flash a factory image without being able to connect the device via adb? i just wasnt able to find the device on it
Thanks for the reply
viper1402 said:
am i able to flash a factory image without being able to connect the device via adb? i just wasnt able to find the device on it
Thanks for the reply
Click to expand...
Click to collapse
factory images are only flashed while youre in your bootloader, via fastboot. thetes a stick for directions in the general thread.
simms22 said:
factory images are only flashed while youre in your bootloader, via fastboot. thetes a stick for directions in the general thread.
Click to expand...
Click to collapse
right got it sorted thanks for the help now its saying i have an update for 5.1.1 is it worth doing this or is there a strong chance it will bootloop again ?
viper1402 said:
right got it sorted thanks for the help now its saying i have an update for 5.1.1 is it worth doing this or is there a strong chance it will bootloop again ?
Click to expand...
Click to collapse
I'd suggest avoiding the OTA's and fastboot flash the latest factory image. LMY48I
IMHO....
viper1402 said:
right got it sorted thanks for the help now its saying i have an update for 5.1.1 is it worth doing this or is there a strong chance it will bootloop again ?
Click to expand...
Click to collapse
is it worth it? YES! if you want, you can flaah the factory image for 5.1.1 instead of taking the ota. but chances are that the ota will be fine.
viper1402 said:
right got it sorted thanks for the help now its saying i have an update for 5.1.1 is it worth doing this or is there a strong chance it will bootloop again ?
Click to expand...
Click to collapse
How did u get it sorted? I just had a friend call me with exactly the same problem! He's not very tech savvy so it's proving difficult talking him thru it, so if u found an easy solution for me to pass on that would be great ?
boxa72 said:
How did u get it sorted? I just had a friend call me with exactly the same problem! He's not very tech savvy so it's proving difficult talking him thru it, so if u found an easy solution for me to pass on that would be great
Click to expand...
Click to collapse
As stated before. Forget OTA. Unlock bootloader and fastboot flash the images manually. Do not take OTA with bootloader locked. If OTA fails have to RMA. No fix.
I had the same issue today and like PRDOG1 said I was talking to him on my forum post. As soon as you get the phone unlock that bootloader, then just do flashes through the bootloader. It is safer, and as long as that bootloader is unlocked you can go ahead and load up any image you want thats factory and you will be fine.
Well it should be fine then coz the carriers in Aussie don't lock bootloaders. I just told him to bring the phone to me n I'll re-flash a stock image for him but I thought u may have found another way as I'm more familiar with Samsung and Windows than I am with Nexus. It seems pretty common this bootloop stuff after OTA with the N6.
Sent from my SM-G920I using Tapatalk
I suspect you are confusing carrier SIM lock with bootloader lock.
Carriers do not usually do anything with bootloader lock - they may force a SIM lock to their SIM cards however.
On the Nexus 6 however, unlocking the bootloader is pretty easy (assuming you can boot to the OS and select the option to allow OEM unlock). I'd recommend leaving the bootloader unlocked and flashing twrp asap, in case of any issues later.
Altho in Australia they don't carrier lock bootloaders the software comes locked for security reasons. If he didn"t unlock prior to the OTA update it is bricked and will require RMA.

Won't boot into recovery

Hello. I have unlocked bootloader successfully (it says "unlocked" at screen and also "tampered"). I have all the fastboot/adb software on my windows pc and can communicate with the phone. I flash recovery via fastboot and it is successful...includes a "recovery" option under bootloader options but it just flashes a disclaimer screen and quickly goes back to bootloader screen. Without custom recovery I cannot root this phone which is my goal. I have tried to reflash other recovery images, including cmw and twrp - I believe cmw is on it now but it won't open.
Hoping someone can assist me with this.
Thank you
belowHeights00 said:
Hello. I have unlocked bootloader successfully (it says "unlocked" at screen and also "tampered"). I have all the fastboot/adb software on my windows pc and can communicate with the phone. I flash recovery via fastboot and it is successful...includes a "recovery" option under bootloader options but it just flashes a disclaimer screen and quickly goes back to bootloader screen. Without custom recovery I cannot root this phone which is my goal. I have tried to reflash other recovery images, including cmw and twrp - I believe cmw is on it now but it won't open.
Hoping someone can assist me with this.
Thank you
Click to expand...
Click to collapse
Reflash whichever recovery you plan to use then remove the battery and put it back in then hold the volume down button and then press and hold the power button at the same time and the phone should then boot to recovery. Make a backup after so you have something to fall back on just in case.
MrMike2182 said:
Reflash whichever recovery you plan to use then remove the battery and put it back in then hold the volume down button and then press and hold the power button at the same time and the phone should then boot to recovery. Make a backup after so you have something to fall back on just in case.
Click to expand...
Click to collapse
Thanks for the reply! I just now gave that a shot but it had no effect.
belowHeights00 said:
Thanks for the reply! I just now gave that a shot but it had no effect.
Click to expand...
Click to collapse
Are you actually holding both buttons down at the same time until the screen turns on? Don't let them go hold them both down until your screen lights up. Then select recovery but if it doesn't work then try below.
Try flashing this version of twrp https://twrp.me/devices/htcdesire510usa32bit.html ... If you're not in the USA I need to know.
Flashing twrp didn't change anything unfortunately. I recently tried re-locking my bootloader and attempted to flash stock images back to the phone but when I press "yes" to the question about voiding the warranty before unlocking the bootloader again...the disclaimer just flashes and the phone won't let it.
Also, I cannot seem to restore it to stock through the menu...nor the bootloader screen.
So now I have "tampered" and "Relocked" banners on top of bootloader screen.
One the upside, the phone itself works fine (I currently only use it for wifi).
Only thing I can think of is I originally flashed a corrupt recovery img (or incompatible version).
Hoping you or someone else has any ideas as to how to get this thing working again. I'd be happy with reverting completly back to stock and starting the process over..
belowHeights00 said:
Flashing twrp didn't change anything unfortunately. I recently tried re-locking my bootloader and attempted to flash stock images back to the phone but when I press "yes" to the question about voiding the warranty before unlocking the bootloader again...the disclaimer just flashes and the phone won't let it.
Also, I cannot seem to restore it to stock through the menu...nor the bootloader screen.
So now I have "tampered" and "Relocked" banners on top of bootloader screen.
One the upside, the phone itself works fine (I currently only use it for wifi).
Only thing I can think of is I originally flashed a corrupt recovery img (or incompatible version).
Hoping you or someone else has any ideas as to how to get this thing working again. I'd be happy with reverting completly back to stock and starting the process over..
Click to expand...
Click to collapse
What service provider are you using?
Don't toss the unlock code you got from HTC you're gonna need the very first one you got keep it forever.
I'm using Boost but I think I figured it out. It ended up being a corrupt download of cmw. I actually used an ruu to get back stock and now the whole process went smoothly. Just looking for a rom that fits...got any recommendations in that area?
belowHeights00 said:
I'm using Boost but I think I figured it out. It ended up being a corrupt download of cmw. I actually used an ruu to get back stock and now the whole process went smoothly. Just looking for a rom that fits...got any recommendations in that area?
Click to expand...
Click to collapse
Not really since everyone has their own tastes but I'd advise you to create a backup in your recovery so you can use it in case something goes wrong. Currently me and a friend are working on CM13/12..
MrMike2182 said:
Not really since everyone has their own tastes but I'd advise you to create a backup in your recovery so you can use it in case something goes wrong. Currently me and a friend are working on CM13/12..
Click to expand...
Click to collapse
Funny enough I never made a backup before and constantly have to re-locate stock images due to soft bricking. I now am making backups so as not to go through that again.
I have a question perhaps you could answer -- if I install a rom that doesn't include any additional tweaks such as extended personaliation options in settings (transitions, etc, etc.)..is there a mod I can flash to achieve that?
belowHeights00 said:
Funny enough I never made a backup before and constantly have to re-locate stock images due to soft bricking. I now am making backups so as not to go through that again.
I have a question perhaps you could answer -- if I install a rom that doesn't include any additional tweaks such as extended personaliation options in settings (transitions, etc, etc.)..is there a mod I can flash to achieve that?
Click to expand...
Click to collapse
For extended personalizing other than developer options, I'd use Xposed.
MrMike2182 said:
Not really since everyone has their own tastes but I'd advise you to create a backup in your recovery so you can use it in case something goes wrong. Currently me and a friend are working on CM13/12..
Click to expand...
Click to collapse
How have you started working on that, i gthink i should join too. Are you working on the USA model or UK? (X86 or X64)
Zubagy said:
How have you started working on that, i gthink i should join too. Are you working on the USA model or UK? (X86 or X64)
Click to expand...
Click to collapse
The USA model because myself and rb don't have the EU phone to even test anything on it.. We still have a lot of booting problems right now. I'd say if you wanted to help I'd have to ask what you know about building roms from source? Have you done it before?
P.S: There's already a CM-12.1 available for the EU model although it does have some issues.. You should read about it if you want to try it..
MrMike2182 said:
The USA model because myself and rb don't have the EU phone to even test anything on it.. We still have a lot of booting problems right now. I'd say if you wanted to help I'd have to ask what you know about building roms from source? Have you done it before?
P.S: There's already a CM-12.1 available for the EU model although it does have some issues.. You should read about it if you want to try it..
Click to expand...
Click to collapse
Not really, But perhaps it time to learn
Zubagy said:
Not really, But perhaps it time to learn
Click to expand...
Click to collapse
It's pretty cool and fun once you get the hang of making things and seeing them function right, and the other thing is... You'll need a pretty decent computer to compile/build with and it'll need to have at least 4GB ram (more is better) and about 50 to 100 GB hard drive space for building your rom plus the CM source code needs to be on your system too...
MrMike2182 said:
It's pretty cool and fun once you get the hang of making things and seeing them function right, and the other thing is... You'll need a pretty decent computer to compile/build with and it'll need to have at least 4GB ram (more is better) and about 50 to 100 GB hard drive space for building your rom plus the CM source code needs to be on your system too...
Click to expand...
Click to collapse
I guess then am good to go, are those the only requirements....... i dont have any source code though
Zubagy said:
I guess then am good to go, are those the only requirements....... i dont have any source code though
Click to expand...
Click to collapse
Well how fast is your internet? By the way.. I'm using a Linux operating system... What are you using? It cannot be done on Windows unless you use a VM.
Hey, I also faced this problem but I find the solution and successfully flash twrp
Hey, I also faced this problem but I find the solution and successfully flash tarp recovery.
belowHeights00 said:
Hello. I have unlocked bootloader successfully (it says "unlocked" at screen and also "tampered"). I have all the fastboot/adb software on my windows pc and can communicate with the phone. I flash recovery via fastboot and it is successful...includes a "recovery" option under bootloader options but it just flashes a disclaimer screen and quickly goes back to bootloader screen. Without custom recovery I cannot root this phone which is my goal. I have tried to reflash other recovery images, including cmw and twrp - I believe cmw is on it now but it won't open.
Hoping someone can assist me with this.
Thank you
Click to expand...
Click to collapse
MrMike2182 said:
Well how fast is your internet? By the way.. I'm using a Linux operating system... What are you using? It cannot be done on Windows unless you use a VM.
Click to expand...
Click to collapse
Sorry for the delay, yes.... i am using vm ware... my net is not that fast... but it can get things done.

I need some help. I'm bricked.

Okay. so after hours of searching and reading about unbricking my nexus 6. I am lost, and very desperate.
So, I unlocked my bootloader, and rooted my phone today using chainfire cf auto root. and all went well. The primary reason I did this was to edit the build.prop file to enable wifi tethering, and this is where my problems started. Using root explorer I added
HTML:
net.tethering.noprovisioning=true
to the end of the build.prop file. I rebooted and now I'm stuck in a bootloop on the google screen.
I did not have a custom recovery installed, so flashing a new rom isn't that easy. I have looked into flashing twrp or cwm from the stock recovery adb sideload feature, but I haven't gotten this figured out either.
So that brings me to where I am at now. I still have an unlocked bootloader, which I guess is leaving me some options, but I just don't know where to go to find information which isn't going to further muck this situation up.
Help, please. I don't have a backup phone. And I am getting desperate.
Thanks in advance
Reboot to the bootloader, flash stock system.img
Sent from my Nexus 6 using Tapatalk
very first off.. http://forum.xda-developers.com/nexus-6/general/attention-questions-t3228454
meaning, you wont get help if tou do ont post it in the right place.
secondly, you have two choices, flash twrp then flash a rom, or flash the factory image(just system.img). what your pro lem is tgat you used a toolkit, instead of learning thd very easy proper way. now you dont know how to do things. its rwally easy to flash twrp via fastboot, and its very easy to flash a factory image using fastboot as well. now ill ask a mod to move your thread into the correct area..
thanks
simms22 said:
very first off.. http://forum.xda-developers.com/nexus-6/general/attention-questions-t3228454
meaning, you wont get help if tou do ont post it in the right place.
secondly, you have two choices, flash twrp then flash a rom, or flash the factory image(just system.img). what your pro lem is tgat you used a toolkit, instead of learning thd very easy proper way. now you dont know how to do things. its rwally easy to flash twrp via fastboot, and its very easy to flash a factory image using fastboot as well. now ill ask a mod to move your thread into the correct area..
Click to expand...
Click to collapse
I am mainly a reader here and don't normally post as I can figure things out on my own normally. So, sorry for posting in the wrong forum.
Help is appreciated..
Thanks.
acscot2 said:
I am mainly a reader here and don't normally post as I can figure things out on my own normally. So, sorry for posting in the wrong forum.
Help is appreciated..
Thanks.
Click to expand...
Click to collapse
i just saw, it was your first post. i didnt mean to sound rude, for that im sorry.
but you have your answer(s). your phone isnt bricked, its just without os. and the os can be flashed, even using a toolkit.

Categories

Resources