hi, i have 2 questions:
1) I think this Newbie Guide have human mistakes.
if i wasn't wrong,
PDA should be "CODE_S5830xxxxxx" ,
Phone should be "MODEM_S5830xxxxxx" and
EFS should be " DO NOT PLACE ANYTHING"
http://forum.xda-developers.com/showthread.php?t=1225493
i hope somebody can verify this.
thanx.
OPS - Select the file named Cooper_v1.0.ops (or anything like that)
BOOT - Select the file named "APBOOT_S5830xxxxx_CL514579_REV03_user_low_true.ta r.md5"
where "xxxxx" = Your firmware version
Phone - Select the file named "CODE_S5830xxxxx_CL514579_REV03_user_low_true.tar. md5"
where xxxxx = firmware version
PDA - DO NOT PLACE ANYTHING
CSC - Select the file named "GT-S5830-MULTI-CSC-xxxxxx.tar.md5"
where "xxxxxx" = the CSC region
EFS - Select the file named "MODEM_S5830xxxxx_CL514579_REV03.tar.md5"
xxxxx = firmware version (Be VERY VERY careful with this EFS part)
After you're done , click on "Start" and let the magic reveal itself slowly......
Click to expand...
Click to collapse
------------------
2) :may i know the why we need to install Android Software Development Kit (SDK) ??
refer to another guide:
Q&A for [GUIDE] How to upgrade, root & flash Samsung Galaxy Ace S5830 [DOWNLOAD LINKS | CWM5]
http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
AFAIK , we only need Android USB Drivers of Samsung Kies + ODIN +OPS to flash the Stock ROM.
and the step to root and unroot (androind 2.2 or 2.3.x) , the phone read the update file directly from the SDCARD.
I have no experience with Flash Custom Revory and Custom Rom yet, but from the fisrt post of this thread, seems that they don't need Android SDK too.
I think this Newbie Guide have human mistakes.
Click to expand...
Click to collapse
First of all, XDA community is wonderful.
I have read maybe thousands of posts here. And I learned many, many interesting things here.
However, I have noticed that not all the explanations, or helps, are very precise, and accurate.
In order not to make a mistake with what you're doing, it is better to search and read many explanations on XDA or on the other sites, about what you want to do, until you are convinced that you did understand.
On the other hand any beginner must divide the actions in 2 parts.
1. Dangerous for the phone
2. Not Dangerous
1.
Dangerous are: root the phone, unlocking the network, install CWM (a wrong one), flash a new Custom ROM (a wrong one), flash a firmware with Odin (with wrong files), and maybe others.
2.
Not Dangerous are: make a backup and restore, flash the same Custom ROM (that you know), modifying an apk and flash it, and so.
The point here is to choose what is good for you.
And, what you do, you do it at your own risk.
Can you please explain more detail , if you do know the answer ?
too sorry about that , I'm not quite understanding what u mean.
randomlizard said:
Can you please explain more detail , if you do know the answer ?
too sorry about that , I'm not quite understanding what u mean.
Click to expand...
Click to collapse
If the man says, PDA - DO NOT PLACE ANYTHING
you have to DO NOT PLACE ANYTHING to PDA
I have put a print screen with the steps.
View attachment 3246528
Step 1 - OPS file for SGA S5830 Cooper, it is not for S5830i
Step 2 - check mark on One Step
Step 3 - firmware that you downloaded and want to put on your phone.
Step 4 - Start and wait about 5 minutes, to write PASS.
And, of course, take your risk.
It's OK now?
randomlizard said:
Can you please explain more detail , if you do know the answer ?
too sorry about that , I'm not quite understanding what u mean.
Click to expand...
Click to collapse
Is it correct that for Odin you just need SAMSUNG_USB_Driver_for_Mobile_Phones
But if you move forward, and you want to work with multiple tools or applications for Android, you will still need the SDK.
What I meant to post 2, is that you have to read between the rows, not word by word.
Because no one can say that: "what works for me, will work for you."
Simply, because here we are not at school.
By the way, I just want to help.
Greetings
beegeero said:
If the man says, PDA - DO NOT PLACE ANYTHING
you have to DO NOT PLACE ANYTHING to PDA
I have put a print screen with the steps.
View attachment 3246528
Step 1 - OPS file for SGA S5830 Cooper, it is not for S5830i
Step 2 - check mark on One Step
Step 3 - firmware that you downloaded and want to put on your phone.
Step 4 - Start and wait about 5 minutes, to write PASS.
And, of course, take your risk.
It's OK now?
Click to expand...
Click to collapse
hi, so glad to have your replies again.
but , my first question is for FULL Package instructions , not the One Package Instructions 。
i have no any problems or questions with One Package. (actually , i think i was quite familiar to One package).
if we google the full package odin instructions , the most of results we got is sth like this:
Bootloader =APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.t ar.md5
PDA=CODE_I9003DDLF2_CL1153545_REV08_user_low_ship. tar.md5
Phone=MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5
CSC=GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5
You see, the parts that hightlight with red color on the top post ,is totally differrent from the google one .
so i need some advice from the veteran people here . (maybe both are correct? just different situation? just a wild guess)
-----------------------------
beegeero said:
Is it correct that for Odin you just need SAMSUNG_USB_Driver_for_Mobile_Phones
But if you move forward, and you want to work with multiple tools or applications for Android, you will still need the SDK.
What I meant to post 2, is that you have to read between the rows, not word by word.
Because no one can say that: "what works for me, will work for you."
Simply, because here we are not at school.
By the way, I just want to help.
Greetings
Click to expand...
Click to collapse
ok, thanks.
so , let's simply assume that android SDK is just for future use with more advanced purpose.
:good:
I think i had found the answer of second question for myself .
Android SDK is for legacy root method that use adb comand to push and root the handphone device from the PC .
so it can be ommited if using something like SuperOneClick or
root by using update from sdcard method .
I think this is my last post for this thread, if no one else reply .
I hope somebody can verify which of below is the correct one:
OPS-OPS, Boot-APBOOT, Phone-CODE, PDA-[EMPTY], CSC-CSC ,EFS-MODEM (leave One Package empty)
(or)
OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
thankx
Related
A successful root method from chinese forum!
from: http://bbs.gfan.com/android-3604178-1-1.html
The only root method so far, is to exchange the recovery in v20B and install root tools through recovery.
step 1) copy Superuser.zip to the root directory in SD card.
step 2) shut down your OB, take out the battery, press volume + and plug the USB cable (which means enter the S/W mode)
Step 3) extract LGP970.7z and obtain v20.bin and v20v.fls files.
step 4) open B_SmartFlashTool_Extern.exe and select:
ROM copy D/L
cp:V20B.fls
ap:V20B.bin
select mode:normal mode
step 5) click start button to start flashing, all data in OB(sms, contacts, game records) won't be lossed.
After flash procedures, you will come to the recovery interface, then, select install zip from SDcard and choose the superuser.zip that you place before.
Reboot and you got the rooted 2.3.4
All files(superuser, LGP970.7z ) can be downloaded from here:
http://115.com/file/cl3smym3
(for someone who don't know chinese:
after you get into the site, you will see 3 color buttons at the middle
green, blue and red, the download link(grey button) is at the right of the red button)
We already know that...
Check this out http://forum.xda-developers.com/showthread.php?t=1480392&page=11
or first page: http://forum.xda-developers.com/showthread.php?t=1480392
N00BY0815 said:
We already know that...
Check this out http://forum.xda-developers.com/showthread.php?t=1480392&page=11
or first page: http://forum.xda-developers.com/showthread.php?t=1480392
Click to expand...
Click to collapse
Is the v20B in the teaching post using Hong Kong version?
exe127 said:
Is the v20B in the teaching post using Hong Kong version?
Click to expand...
Click to collapse
No, as written in the threads linked by N00BY.
Please read before you post.
Nor the rooted V20b uploaded to the Chinese forum the Hong Kong stock ROM, as reported by some in their replies.
The "new" method posted on the Chinese forum is actually the one posted by SnegovikRZN on xda.
But the poster didn't give proper credit to the source.
The only thing you need, is ubuntu or other linux distributions, the bin files of your firmware (u can get em like this: http://csmg.lgmobile.com:9002/csmg/b2c/client/cs_auth_model_check.jsp?esn=imei) replace IMEI, btw.
And this guide: http://forum.xda-developers.com/showpost.php?p=22329293&postcount=106
noranyan said:
No, as written in the threads linked by N00BY.
Please read before you post.
Nor the rooted V20b uploaded to the Chinese forum the Hong Kong stock ROM, as reported by some in their replies.
The "new" method posted on the Chinese forum is actually the one posted by SnegovikRZN on xda.
But the poster didn't give proper credit to the source.
Click to expand...
Click to collapse
Because the one post in xda is using v20B which is equally to the HongKong OB stock rom = v20B, so my question is , is that v20B is the HK's v20B ?
exe127 said:
Because the one post in xda is using v20B which is equally to the HongKong OB stock rom = v20B, so my question is , is that v20B is the HK's v20B ?
Click to expand...
Click to collapse
IT DOESNT MATTER which one it is, just download the bin file YOU need, and follow the guide then. Ask in the thread, which version it is. I cant answer this to you, since I am using a N version of GB. I already gave you the link, of how to get the right BIN files, via your IMEI, and if you couldnt get the official update yet, ask another one about it. Or simply try the ROM. It is rooted, so you can enter CWM quickly and also restore the previous version, if needed.
N00BY0815 said:
IT DOESNT MATTER which one it is, just download the bin file YOU need, and follow the guide then. Ask in the thread, which version it is. I cant answer this to you, since I am using a N version of GB. I already gave you the link, of how to get the right BIN files, via your IMEI, and if you couldnt get the official update yet, ask another one about it. Or simply try the ROM. It is rooted, so you can enter CWM quickly and also restore the previous version, if needed.
Click to expand...
Click to collapse
Thank you for your link, I get this sw_url:
but how can I download it?
I copy it to my browser but nothing appear. Thanks for your help
<sw_url>http://csmg.lgmobile.com:9002/ezls/MESSW/LGP970/HKG/SWP/3/BIN_LGP970AT-00-V20b-454-XXX-DEC-31-2011+0.zip</sw_url>
</cs_auth_model_check>
</response>
The request for the zip file that you get when making the request with a German IMEI always return a 404 (not found). I wonder where has the user SnegovikRZN taken them from.
Ok, sorry then, I thought LG already released the bin files. I've been wrong there it seems.
Idk where he got em from. Maybe ask him via PM or in his thread.
N00BY0815 said:
Ok, sorry then, I thought LG already released the bin files. I've been wrong there it seems.
Idk where he got em from. Maybe ask him via PM or in his thread.
Click to expand...
Click to collapse
if I get the file from this:
http://csmg.lgmobile.com:9002/ezls/...IN_LGP970AT-00-V20b-454-XXX-DEC-31-2011+0.zip
Is that I can directly flash the bin file(extract from the above link) by smartflash?
Yes, you can flash the with Smart Flash, just as described here: http://forum.xda-developers.com/showpost.php?p=22304591&postcount=91 (of course by replacing the names of the fls/bin file with your own).
I would have one request from you, I am not able to download that zip from LG, but if you can, can you please share it somewhere ? I would like to have that in case that i have to bring the telephone back to the shop for warranty - it's a "just in case" scenario .
Dan
ok, if I can get the zip file from LG, I will post here
ok, I will post it if I know how to download the zip from LG
Hi there
Yes I know there are articles about this (damn long articles with strange terms). And I have read through a lot posts about how to root Samsung Galaxy Note - there seems to be 1001 ways to do it but none of them worked on my model KL3 (purchased from Starhub in Singapore)
-> Tried one-click root method - doesnt work anymore for KL3
-> Tried odin method, can't find the place to download the revised ROM (just wondering why will the author still post the URL that is invalid?)
So please anyone out there, if you have done any successful root on KL3, please let me know how you did it.
I am willing to pay you some $$ to get the no-nonsense answer - I have wasted 1 day digging around and I don't want to waste more time.
Tony
http://forum.xda-developers.com/attachment.php?attachmentid=864276&stc=1&d=1327042915
download the above file ... extract and Execute "not-rooted-yet.bat" and follow the instructions.
as simple as that...
it depend on ur firmware, i bought mine from msia..
it was 2.3.6 so i did downgrade to 2.3.5 using odin, after that i use the method describe in this http://forum.xda-developers.com/atta...1&d=1327042915
and happily rooted mine to using RR and others ROM as well..i kept changing ROM when ever they hv new one..haha
u can contact me ..im usig starhub too nine zero six nine seven two nine seven
tonygutao said:
Hi there
Yes I know there are articles about this (damn long articles with strange terms). And I have read through a lot posts about how to root Samsung Galaxy Note - there seems to be 1001 ways to do it but none of them worked on my model KL3 (purchased from Starhub in Singapore)
-> Tried one-click root method - doesnt work anymore for KL3
-> Tried odin method, can't find the place to download the revised ROM (just wondering why will the author still post the URL that is invalid?)
So please anyone out there, if you have done any successful root on KL3, please let me know how you did it.
I am willing to pay you some $$ to get the no-nonsense answer - I have wasted 1 day digging around and I don't want to waste more time.
Tony
Click to expand...
Click to collapse
First downgrade your firmware, then Root it. after applying Root, you can back to Singapore KL3 or watever new ROM you desire, by using CWM or Mobile Odin
Hi sorry to hijack yr thread OP,but i am also from Singapore.i bought a set from singtel.
my firmware are as follow:
PDA:N7000DXKL3
PHONE:N7000DXKL2
CSC:N7000OLBKL2
Baseband:N7000DXKL2
Kernel:2.6.35.7-N7000DXKL3-CL825081 [email protected]#2
i am confused on which one to look at as both pda and phone has different KL version..so which one should i be looking at for rooting purposes and can my current fw be rooted directly?
Look at kernel version. You are on KL3.
Follow dr.ketan's post above.
thanks for replies.
what puzzles me is that,i read dr.ketan's pdf guide and found that N7000DXKL3 is direct rootable.have u tried and it failed?
JxXxn said:
thanks for replies.
what puzzles me is that,i read dr.ketan's pdf guide and found that N7000DXKL3 is direct rootable.have u tried and it failed?
Click to expand...
Click to collapse
Actually xxkl3 was released early that was direct rootable, but some newer version released under kl3 are not rootable
Actuallt kl* are non rootable, except some early kl3. So you shud try to root it directly, if not success you should consider it as non rootable.
Sent from my GT-N7000 using xda premium
Let me try to help you guys.
1. download this zip file to your PC.
2. Uzip.
3. On your Note:
Settings/Applications/Unknown Sources - Check!
Settings/Applications/Development/USB Debugging - Check!
4. Connect USB cable to Note, then to PC
5 Back to your PC folder where you have unpacked the zip
5. Start not-rooted-yet.bat
6. Follow the instructions, and you'll be rooted in a couple of seconds.
Hope this helps.
For those in Singapore...Either post on https://www.facebook.com/SamsungMobileSingapore
or send me a PM and i will help u personally.
Can someone help? While running the not-rooted-yet.bat, got a error message "
--- pushing zImage
failed to copy 'zimage\zImage' to '/data/local/zImage': Permission denied
Thanks...
chasmodo said:
Let me try to help you guys.
1. download this zip file to your PC.
2. Uzip.
3. On your Note:
Settings/Applications/Unknown Sources - Check!
Settings/Applications/Development/USB Debugging - Check!
4. Connect USB cable to Note, then to PC
5 Back to your PC folder where you have unpacked the zip
5. Start not-rooted-yet.bat
6. Follow the instructions, and you'll be rooted in a couple of seconds.
Hope this helps.
Click to expand...
Click to collapse
leongyw said:
Can someone help? While running the not-rooted-yet.bat, got a error message "
--- pushing zImage
failed to copy 'zimage\zImage' to '/data/local/zImage': Permission denied
Thanks...
Click to expand...
Click to collapse
Mmm.
I m from singapore also.
I can tell u, i don't care which version i am.
Normally i will just download the newest version from www.sammobile.com and flash through odin, and on ICS, if i loose my root, i will use http://forum.xda-developers.com/showthread.php?t=1746794. To get my root back. Easy and fast.
Ps: i never do full wipe on ics, i tried once and brick my device.
Sent from my GT-N7000 at the corner of this rounded earth.
Hi guys,
I know it has been asked many times but still......I bought my note 2 days back.Its on LB1-BaseBand and LB2-build number.now:
1.Can I root this firmware and install cwm?If so pls guide me.I'm still a noob.
2.Is note unbrickable like sgs?I dont need my device getting bricked.thanks guys
http://forum.xda-developers.com/showthread.php?t=1329360
No u cant root it directly..u have to downgrade to an older rom which is rootable
Sent from my GT-N7000 using xda premium
You need to downgrade your ROM to get it rooted.
download this
start guide n just select 'I have non rootable ROM' n follow instruction to the letter.
It is same as praetorius said you, but simplified guide with steps like 1 2 3
Thanks everyone.....Now my second question still unanswered...Is note practically unbrickable like sgs?
vijai2011 said:
Thanks everyone.....Now my second question still unanswered...Is note practically unbrickable like sgs?
Click to expand...
Click to collapse
No, it is not.
Oh why is it so???Thn what are the chances for bricking it??What is the pit file for note??
vijai2011 said:
Oh why is it so???Thn what are the chances for bricking it??What is the pit file for note??
Click to expand...
Click to collapse
There many chances of bricking your Note. Just read This thread. Many people already bricked their Note.
Pit file is used for Partitions management.
ranjan.alva said:
There many chances of bricking your Note. Just read This thread. Many people already bricked their Note.
Pit file is used for Partitions management.
Click to expand...
Click to collapse
Lol.I know about pits and flashing.I have done it thousand times in my i9000.I have even developed roms for sgs.I'm new to the newer boot loaders,binary counters and triangles and other stuffs..... as sgs dont have these problems.
K things apart.What it the pit file to use while using wipe rom?And when I enter dl mode it asks for confirmation.If I accept,will it ask again when I enter dl mode later though I dint flash any rom?
dr.ketan said:
You need to downgrade your ROM to get it rooted.
download this
start guide n just select 'I have non rootable ROM' n follow instruction to the letter.
It is same as praetorius said you, but simplified guide with steps like 1 2 3
Click to expand...
Click to collapse
Thanks for your help.
1.Now the multiupload link is down which is needed to download the rom.
2."Mirror for Above file:
Download this three files
http://hotfile.com/dl/146422380/030d3db/SGN_XX_OXA_KJ1_FACTORYFS.zip.001.html
http://hotfile.com/dl/146410213/f6738db/SGN_XX_OXA_KJ1_FACTORYFS.zip.002.html
http://hotfile.com/dl/146409567/c333e30/SGN_XX_OXA_KJ1_FACTORYFS.zip.003.html "
Is this the mirror for the rom or should I download all of it?
3.You have provided the link to download the tool to join the three files and given the mirrors below it.Thn what is this for?
"Tool to join them, run the following file and locate the .001 file.
http://www.mediafire.com/?btrusgmd1v2d72q"
Thanks for helping.P.S the text within quotes from your link for rooting a nonrootable rom.
mirror three media fire is working, some one reported just y'day.
Multiupload file / hotfile/mediafire all are same
1.multiupload
2nd mirror hotfile
3rd mirror media fire
as multiupload not working, you can use mirror 2 or 3
mirrors are interchangable e,g, if you have downloaded 001 file from hotfile you can download 002, 003 from mediafire too.
total you need to download three main file ending name, 001,002, 003 + 1 tool that will join three files to make single.
hotfie/mediafire not allowing to update > 200MB file size. so in mirror main file is splitted to three part, you have do download three files 001,002 n 003
then you have to join this parts with file joiner tool, then it will become single ROM file.
dr.ketan said:
mirror three media fire is working, some one reported just y'day.
Multiupload file / hotfile/mediafire all are same
1.multiupload
2nd mirror hotfile
3rd mirror media fire
as multiupload not working, you can use mirror 2 or 3
mirrors are interchangable e,g, if you have downloaded 001 file from hotfile you can download 002, 003 from mediafire too.
total you need to download three main file ending name, 001,002, 003 + 1 tool that will join three files to make single.
hotfie/mediafire not allowing to update > 200MB file size. so in mirror main file is splitted to three part, you have do download three files 001,002 n 003
then you have to join this parts with file joiner tool, then it will become single ROM file.
Click to expand...
Click to collapse
Thanks man!!!Can you answer for questions asked in post #9?BTW the first and third hotfile mirror for the rom is deleted....
vijai2011 said:
Thanks man!!!Can you answer for questions asked in post #9?BTW the first and third hotfile mirror for the rom is deleted....
Click to expand...
Click to collapse
below is answer
I told you earlier mirror 3(mediafire) is working.
vijai2011 said:
K things apart.What it the pit file to use while using wipe rom?And when I enter dl mode it asks for confirmation.If I accept,will it ask again when I enter dl mode later though I dint flash any rom?
Click to expand...
Click to collapse
U need not to use pit, unless it is specially advised. it has no relation with wipe/nonwipe ROM.
DL mode will ask everytime to continu to use as DL mode/Reboot normally.
dr.ketan said:
below is answer
I told you earlier mirror 3(mediafire) is working.
U need not to use pit, unless it is specially advised. it has no relation with wipe/nonwipe ROM.
DL mode will ask everytime to continu to use as DL mode/Reboot normally.
Click to expand...
Click to collapse
K now will flashing your rom give triangle and increase binary counter?And when I need to revert back to stock rom is there anything to be disabled like voodoo lag fix as in sgs???and is cwm included in your rom?
No it won't give triangle,Nor it raise counter, if you follow guide to the letter.
You can revert back with just flashing stock ROm with PC odin.
After flashing modified ROM(which U have downloaded in 3part), you will have just Root, you have to get CWM after.
Just download guide from here n follow it, for further assistance.
dr.ketan said:
No it won't give triangle,Nor it raise counter, if you follow guide to the letter.
You can revert back with just flashing stock ROm with PC odin.
After flashing modified ROM(which U have downloaded in 3part), you will have just Root, you have to get CWM after.
Just download guide from here n follow it, for further assistance.
Click to expand...
Click to collapse
K thanks now according to my knowledge,Flashing custom kernel should give triangle and flashing custom rom increases binary value right?If so getting cwm will give triangle and when flashing stock rom will remove it ri8?Can a usb jig be used to remove both triangle and binary counter?
when custom rom/kernel flashed with pc odin then only it give triangle.
If u fillow my guide to get cwm it wont.
Use of jig is apart from topic right here, get from sticky over deve sectiin for detail
Sent from my GT-N7000 using xda premium
ranjan.alva said:
There many chances of bricking your Note. Just read This thread. Many people already bricked their Note.
Pit file is used for Partitions management.
Click to expand...
Click to collapse
On this point....
From what i've read in the first pages of this thread a few days ago, They catch this doomed kernel on a Chinese forum....
+ that's originally for the i9220 ( the chinese version of the Note )
This situation only proves that the I9220 is not SO close to the N7000 for me.
(or if what i 've read today in the last pages of the thead is right, they(the angelom team) messed up the fstab file (i don't even see why they edited this file, it's the best way to kill a Linux based OS, that's where the partition layout is stocked....Even for a new way to root a kernel...).
All that for a sneak peak on an unfinished ICS leak ( with almost as much problems as the first ones for the SGS2 ).
If you're past the FAD phase (Flash Addict Disorder, we all have it for a time , mine was during the last year, for my SGS2 ^^ ) , or if you are able to read a HowTo , I don't see how you can brick the Note
Amrael said:
On this point....
From what i've read in the first pages of this thread a few days ago, They catch this doomed kernel on a Chinese forum....
+ that's originally for the i9220 ( the chinese version of the Note )
This situation only proves that the I9220 is not SO close to the N7000 for me.
(or if what i 've read today in the last pages of the thead is right, they(the angelom team) messed up the fstab file (i don't even see why they edited this file, it's the best way to kill a Linux based OS, that's where the partition layout is stocked....Even for a new way to root a kernel...).
All that for a sneak peak on an unfinished ICS leak ( with almost as much problems as the first ones for the SGS2 ).
If you're past the FAD phase (Flash Addict Disorder, we all have it for a time , mine was during the last year, for my SGS2 ^^ ) , or if you are able to read a HowTo , I don't see how you can brick the Note
Click to expand...
Click to collapse
that was useful thanks.
Hi All - very new to the forum an very new to Android. I have SGS I9070 DDLK2 (i am from India). Airtel is the provider.
I have been going thru the forum and tried to root the SGS, with the method in the below link:
h t t p: / / techdraginfo . blogspot . com / 2012 / 10 / how-to-root-samsung-galaxy-s-advance
After that i installed the SU and Busybox from Google Play, but on my SU log's it reads - Binary outdated? i tap to update the update being, get error "no root access".. the busybox too i am unable to install (symfile is selected) its gives error "boot recovery" and the install fails. BUT i have both SU and Busybox in my application list? Is my phone rooted ?
I do not want to upgrade to JB, need GB only. as the software that i have will work only on 4.0.x... i need help from the forum to guide me on how to gain complete root access on I9070 with BG as OS... I am very novice at all this - was able to root as there were screen shots in the link that i used for rooting my SGS I9070.
Would appreciate your help... pls pls
Одг: [Q] Root SGS I9070 DDLK2
vidyamit said:
Hi All - very new to the forum an very new to Android. I have SGS I9070 DDLK2 (i am from India). Airtel is the provider.
I have been going thru the forum and tried to root the SGS, with the method in the below link:
h t t p: / / techdraginfo . blogspot . com / 2012 / 10 / how-to-root-samsung-galaxy-s-advance
After that i installed the SU and Busybox from Google Play, but on my SU log's it reads - Binary outdated? i tap to update the update being, get error "no root access".. the busybox too i am unable to install (symfile is selected) its gives error "boot recovery" and the install fails. BUT i have both SU and Busybox in my application list? Is my phone rooted ?
I do not want to upgrade to JB, need GB only. as the software that i have will work only on 4.0.x... i need help from the forum to guide me on how to gain complete root access on I9070 with BG as OS... I am very novice at all this - was able to root as there were screen shots in the link that i used for rooting my SGS I9070.
Would appreciate your help... pls pls
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1660419
Read first two posts carefuly. If you have problem making kernel for step 10, tell me to do it.
Sent from Galaxy S Advance
shut_down said:
http://forum.xda-developers.com/showthread.php?t=1660419
Read first two posts carefuly. If you have problem making kernel for step 10, tell me to do it.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thank you for a quick reply. This is the same method i used to root my phone. As i have DDLK2 i went ahead and used the xxld1.tar.md5. after this i downloaded the SU and Busybox? Its the error's i have in SU and Busybox isnt getting installed?
Can you help me with the kernel ?
Thanks in advance...
vidyamit said:
Thank you for a quick reply. This is the same method i used to root my phone. As i have DDLK2 i went ahead and used the xxld1.tar.md5. after this i downloaded the SU and Busybox? Its the error's i have in SU and Busybox isnt getting installed?
Can you help me with the kernel ?
Thanks in advance...
Click to expand...
Click to collapse
Download your stock firmware from www.sammobile.com/firmware or http://samsung-updates.com/tag/firmware/ and attach me kernel.bin.md5 from that file. I will repack it for step 10. You can post that on that thread for rooting, maybe someone else needs it. And it will be easier to find there, then here on this one.
shut_down said:
Download your stock firmware from w w w . s a m m o b i l e . c o m / f i r m w are or h t t p : / / s amsung-updates . c o m / t ag / firmware/ and attach me kernel.bin.md5 from that file. I will repack it for step 10. You can post that on that thread for rooting, maybe someone else needs it. And it will be easier to find there, then here on this one.
Click to expand...
Click to collapse
Thank you. I am Downloading: I9070DDLK2_I9070ODDLJ1_INU.zip (sammobile)
once the download is done will share the kernel.bin.md5. Would you need anything else do let me know. I truly appreciate your help...
vidyamit said:
Thank you. I am Downloading: I9070DDLK2_I9070ODDLJ1_INU.zip (sammobile)
once the download is done will share the kernel.bin.md5. Would you need anything else do let me know. I truly appreciate your help...
Click to expand...
Click to collapse
Just that. After that you will repeat all from that guide for rooting. And by this method you increase binary counter. Triangle away can reset it now for our phone.
shut_down said:
Just that. After that you will repeat all from that guide for rooting. And by this method you increase binary counter. Triangle away can reset it now for our phone.
Click to expand...
Click to collapse
Ok, i downloaded the I9070DDLK2_I9070ODDLJ1_INU.zip from SAMMOBILE
i have a ZIP file and it has 2 contents
1) I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 - 700MB file
2) SS_DL.dll - 2.76 MB fiile
I tried to extract the I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 and i get is the same file again I9070DDLK2_I9070ODDLJ1_HOME.tar.md5.
How do i get kernel.nib.md5 ?
vidyamit said:
Ok, i downloaded the I9070DDLK2_I9070ODDLJ1_INU.zip from SAMMOBILE
i have a ZIP file and it has 2 contents
1) I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 - 700MB file
2) SS_DL.dll - 2.76 MB fiile
I tried to extract the I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 and i get is the same file again I9070DDLK2_I9070ODDLJ1_HOME.tar.md5.
How do i get kernel.nib.md5 ?
Click to expand...
Click to collapse
Oops ! i had to 7zip the file..:victory:
Here you go Sir...
vidyamit said:
Oops ! i had to 7zip the file..:victory:
Here you go Sir...
Click to expand...
Click to collapse
Here, just unzip it. And use for step 10.
shut_down said:
Here, just unzip it. And use for step 10.
Click to expand...
Click to collapse
Thank you soooo much. I really appreciate your help.. one last thing, let me know if the below steps are correct:
i will follow the link that you gave me to root
will download GT-I9070-root.rar, will extract ODIN
will enable USB debugging and mock location on the phone
turn off the phone and put it on download mode
Under PIT file browse for GT-I9070_EUR_XX_8G_20111220_KL6.pit, you have extracted this file before.
Under PDA choos rootkernel.tar.md5
Then check what options are checked (Selected), be sure to UNCHECK (remove selction) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected)
When this is set just press Start and wait for phone to reboot
Now repeat steps from 4 to 9, with one exception at step 7 I will CHOOSE THE FILE THAT YOU REPACKED FOR ME....
let the phone boot
Install SU / Busybox and Traingle away....
and i will be done - pls let me know.... :fingers-crossed::fingers-crossed::fingers-crossed:
vidyamit said:
Thank you soooo much. I really appreciate your help.. one last thing, let me know if the below steps are correct:
i will follow the link that you gave me to root
will download GT-I9070-root.rar, will extract ODIN
will enable USB debugging and mock location on the phone
turn off the phone and put it on download mode
Under PIT file browse for GT-I9070_EUR_XX_8G_20111220_KL6.pit, you have extracted this file before.
Under PDA choos rootkernel.tar.md5
Then check what options are checked (Selected), be sure to UNCHECK (remove selction) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected)
When this is set just press Start and wait for phone to reboot
Now repeat steps from 4 to 9, with one exception at step 7 I will CHOOSE THE FILE THAT YOU REPACKED FOR ME....
let the phone boot
Install SU / Busybox and Traingle away....
and i will be done - pls let me know.... :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
I think you even do not need to use pit file. Yes, that is it. And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.
Op : so you mail me, i give you the method and you make a new thread? I mean what the fcuk?
:annoyed:
I do not respond to tech support via PM
Shaaan said:
Op : so you mail me, i give you the method and you make a new thread? I mean what the fcuk?
:annoyed:
I do not respond to tech support via PM
Click to expand...
Click to collapse
No - I posted in XDA, one was kind to reply. He also helped me with the Kernel.... i am just following his step by step instructions... I never made any thread... Pls read thru the entire thread...
shut_down said:
... And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.
Click to expand...
Click to collapse
Can you give more details? Eventually links from Google Play with that Superuser?
Thanks a lot
PS: I use SuperSU now and I think that is not so fine.
R_a_z_v_a_n said:
Can you give more details? Eventually links from Google Play with that Superuser?
Thanks a lot
PS: I use SuperSU now and I think that is not so fine.
Click to expand...
Click to collapse
I use SuperSU on JB now, but on GB I didn't have root access when I used it (didn't work at all). No need to change.
LOL, you can easy find it. Here.
Need to uninstall first SuperSU.
Huh, thinking I use an wrong application , but from what I read, chainfire (SuperSU) update released more than chainsDD tuned, and that's why I asked more details about that.
Here what i read: http://forum.xda-developers.com/showthread.php?t=1704441
shut_down said:
I think you even do not need to use pit file. Yes, that is it. And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.
Click to expand...
Click to collapse
Hi - i did follow the steps, and also flashed your kernel, but guess its its creating some issues? unable to download Superuser, WIFI is hanging upp and also unable to make calls... any help pls..
vidyamit said:
Hi - i did follow the steps, and also flashed your kernel, but guess its its creating some issues? unable to download Superuser, WIFI is hanging upp and also unable to make calls... any help pls..
Click to expand...
Click to collapse
I know there are issues when you do not go back to stock kernel. You are sure you flashed this stock one I give you?
shut_down said:
I know there are issues when you do not go back to stock kernel. You are sure you flashed this stock one I give you?
Click to expand...
Click to collapse
Yes - very much? I am resetting the device as of now... Was able to install the Superuser but wasnt working properly...
i restarted the phone - was able to do calls... so that is a breather... now as i told i am restoring factory settings... and it is at the Android screen where i touch it and start configurations.... now what next (((
vidyamit said:
Yes - very much? I am resetting the device as of now... Was able to install the Superuser but wasnt working properly...
i restarted the phone - was able to do calls... so that is a breather... now as i told i am restoring factory settings... and it is at the Android screen where i touch it and start configurations.... now what next (((
Click to expand...
Click to collapse
So now everything works fine? Install app superuser from play store, open it and find in options update binary. You will have it I think when you go in left once.
Hello to you guys,
with this thread I wanna help people who get a Live Demo Unit of Galaxy S5 and wanna "unlock" it, removing Retail Mode and getting an official firmware on it. A Live Demo Unit is recognizable cause the phone has an "X" after the "SM-G900" signature.
Before start explain, I wanna remember to all that with a Live Demo Unit YOU CAN'T DO PHONE CALLS or TEXT MESSAGING due to its nature. So, this custom friwmare will transform your Live Demo Unit in a beautiful and complete Galaxy S5 "WiFi Version" .
Ok, lets do this!
What you need for a great job is:
Samsung USB Drivers on your PC
Odin, downloadable from here http://odindownload.com/ (vers. 3.09)
TWRP Recovery, .tar extension (here is the link for the download http://techerrata.com/browse/twrp2/klte)
Firwmare of your country. You can get it form sammobile.com. I've done this with the G900F version and I've tested only with it but I think this kind of guide works for all devices. Be sure to download the correct Firmware of your device!!
A program named "cgywin" for create your own firmware for the Live Demo Unit http://cygwin.com/setup.exe
Do this AT YOUR OWN RISK!! If you're not sure to have understand something, please do not go any further.
Ok, so let's start to explain what to do. If you'll follow step by step this procedure, you'll reach the goal for sure
First, I think is better to do a good and complete backup of your actual firmware and system. To do that follow those steps:
Install Samsung USB driver in your PC (if you don't have it already). Be sure that the phone is visible by your PC.
Turn off the device and go into Download mode (pressing VolDown+Home+Power).
Open Odin and connect your device to the PC.
Now flash the TWRP Recovery (select "AP" voice on Odin and choose TWRP .tar file you have already downloaded)
Ok, now you can do a Nandroid backup of your entire phone, including system, with Recovery. So, turn off the device and go into Recovery, then choose "Backup" and flag ALL the voices (so you'll be sure to backup all). Save it in external MicroSD so you can get it simply if you need it.
After the complete backup, it's time to "prepare" the custom firmware:
Install cgywin (for a complete guide for How To Install this program, Google it)
Download the right firmware for your device
Once file is downloaded you will have something looking like this G900FXXU1ANCE_G900FITV1ANC7_ITV (this is the one I've used)
Extract the .zip file to get an .md5
Rename it with like ldu900x.tar
Go into the folder were you've install cgywin and put the ldu900x.tar here
Now, launch cgywin.exe and type those command
$ tar --delete --file=ldu900x.tar NON-HLOS.bin
$ tar --delete --file=ldu900x.tar modem.bin
After that, the ldu900x should have only those files on it:
- boot.img
- cache.img.ext4
- hidden.img.ext4
- recovery.img
- system.img.ext4
If there are other files that are not those I've checked above, please delete them using the command $ tar --delete --file=samrom.tar FileName on cgywin as explained. The final .tar file gotta have only those 5 files I've listed above.
Once the final ldu900x.tar is ready, you can flash it with Odin.
Before the flash, use TWRP for a TOTAL WIPE of the device (including system but do not wipe the extSDcard). This is for to be sure that the device will be ready for a good and clear flash.
After the flash with Odin, reflash the TWRP Recovery (following the steps above) so you can do other backup or restore the old firmware if you need it.
Hope this guide can help all the guys who need to use their LDU completely (excluding calls and SMS as said). Personally my LDU doesn't have Private Mode, Finger Scanner, S-Health, UltraPowerSavingMode and other stuff, but with this "custom" firmware made by myself, now works ALL! :victory:
Bugs: The only thing that does not work here is the upgrading of SHealth Services that does not allow to upgrade it to SHealth 3.1 version. If anyone know how to solve this I appreciate
Thank you guys for your support and thanks to:
@Dees_Troy for TWRP
@Sirus2012 for have opened the way
@jopa7 for suggestions
Fell free to offer me a beer (or a meat can for my 5 cats )
Have a good flash to all!
Reserved
Cool might be helpful
Sent from my SM-G900H using XDA Premium 4 mobile app
Got pumped when I saw rom.... Been waiting for aosp Lol...
Sent from my SM-G900F using Tapatalk
bjc112 said:
Got pumped when I saw rom.... Been waiting for aosp Lol...
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Same here... But might be helpful anyway [emoji106]
Great work , pm you to send you a beer! You could upload the tar to somewhere and put here the link.
Cheers
Sent from my HTC One max using xda app-developers app
Thank you guys! Sorry for give you an illusion of a SUPERPOWERFUL ROM @jopa7 I'm uploading it on my Dropbox. If you give me your email I can share it to you!
iorya984 said:
Thank you guys! Sorry for give you an illusion of a SUPERPOWERFUL ROM @jopa7 I'm uploading it on my Dropbox. If you give me your email I can share it to you!
Click to expand...
Click to collapse
You can install a superpower rom, mate. Install omega with omega kernel after root with chain CF auto root and install TRWP. Install latest omega zip via trwp chosing omega kernel too. You will get 37000 antutu score or more . By the way, GPS signal works
jopa7 said:
You can install a superpower rom, mate. Install omega with omega kernel after root with chain CF auto root and install TRWP. Install latest omega zip via trwp chosing omega kernel too. You will get 37000 antutu score or more . By the way, GPS signal works
Click to expand...
Click to collapse
Jopa7 are you talking about to flash Omega Rom on LDU? Did you do that?
iorya984 said:
Jopa7 are you talking about to flash Omega Rom on LDU? Did you do that?
Click to expand...
Click to collapse
works like charm!
Have you flashed the entire ROM, also with modem.bin?
iorya984 said:
Have a good flash to all!
Click to expand...
Click to collapse
Thanks a lot for instructions ...
it works
Question
hello to everybody, i have a question, i have an s5 ldu and when i enter those commands in cygwin says that those files doesnt exist in the archive but that's not true, some help? TY:silly:
gzincu said:
hello to everybody, i have a question, i have an s5 ldu and when i enter those commands in cygwin says that those files doesnt exist in the archive but that's not true, some help? TY:silly:
Click to expand...
Click to collapse
I was having same problem and then I downloaded Ubuntu live cd to delete those files
You will have to use terminal for that
Or you can pm author of this thread for precompiled version
help
He doesn't seem to be active on this forum, i would be very happy if you cand send to me the precompiled archive. Thanks alot!
gzincu said:
He doesn't seem to be active on this forum, i would be very happy if you cand send to me the precompiled archive. Thanks alot!
Click to expand...
Click to collapse
Send me your dropbox id through pm
Pre-Compiled version by iorya984
Pre-Compiled version by iorya984
Download Links:-
http://ul.to/dwe11uck
http://ul.to/uvu2vbt0
All Credit goes to iorya984
Proper Tutorial
jopa7 said:
You can install a superpower rom, mate. Install omega with omega kernel after root with chain CF auto root and install TRWP. Install latest omega zip via trwp chosing omega kernel too. You will get 37000 antutu score or more . By the way, GPS signal works
Click to expand...
Click to collapse
Hi all and thank you for this great tutorial. How did you manage to get the gps to work? It shows it's searching for gps signal but never gets it... did you flash a certain modem file?
Anyone get S health to work??
Thank all!!!
aaa82 said:
Anyone get S health to work??
Click to expand...
Click to collapse
same question from me
hello
thankyou for the precompiled files, i am a boot, i dont know what to do exactly, where i have to add the ldu900x.tar in odin? BL, AP,CP or CSC?