Hi all , I have a no root P7 and I have the following problem : the phone tells me this problem :
I tried to flash the original ROM EMUI 3.0 (I downloaded from Huawei website . Then I extracted the zip file and copy the folder "dload" in SD caed) but after a while says "Fail" and the procedure stopped . After several attempts the Rom is installed but I have still yet the same problem . Why ?
When you say from Huawei site, can you please provide the link?
The link of the Rom? I don't understand what has to do with my issue
Inviato da Mountain View
If your device is under warranty, send it back.
Elia_94 said:
Hi all , I have a no root P7 and I have the following problem : the phone tells me this problem : http://fs2.directupload.net/images/150405/7o8s4gtu.jp
I tried to flash the original ROM EMUI 3.0 (I downloaded from Huawei website . Then I extracted the zip file and copy the folder "dload" in SD caed) but after a while says "Fail" and the procedure stopped . After several attempts the Rom is installed but I have still yet the same problem . Why ?[/QUOTE]
that is NOT any issue.. that is reminder if anything goes wrong..
If u dont want that message flash emui 3.0 3BTN
or check this : http://forum.xda-developers.com/ascend-p7/help/p7-l10-defect-report-reminders-t2952124
[IMG]https://cdn-images.xda-developers.com/direct/3/0/3/2/4/8/0/1416865322259.jpg
Click to expand...
Click to collapse
Elia_94 said:
The link of the Rom? I don't understand what has to do with my issue
Inviato da Mountain View
Click to expand...
Click to collapse
Few posts above you said: "I tried to flash the original ROM EMUI 3.0 (I downloaded from Huawei website ."
I wander do you have a direct link or you are talking about settings > update download.
ibeqa said:
If your device is under warranty, send it back.
Click to expand...
Click to collapse
Warranty deals with these problems?
Simona Simmy said:
that is NOT any issue.. that is reminder if anything goes wrong..
If u dont want that message flash emui 3.0 3BTN
or check this : http://forum.xda-developers.com/ascend-p7/help/p7-l10-defect-report-reminders-t2952124
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Thanks but the link that you posted is only an image , i don't understand the sense of the message .
kriticar said:
Few posts above you said: "I tried to flash the original ROM EMUI 3.0 (I downloaded from Huawei website ."
I wander do you have a direct link or you are talking about settings > update download.
Click to expand...
Click to collapse
I downloaded the Rom from Huawei Italia - Download - EMUI (official website) , now I don't have the link .
Inviato da Mountain View
Elia_94 said:
Warranty deals with these problems?
Click to expand...
Click to collapse
It depends! Was this issue from the day one when you bought your phone?
If not than follow Simona Simmy on post #5.
Elia_94 said:
Warranty deals with these problems?
Thanks but the link that you posted is only an image , i don't understand the sense of the message .
I downloaded the Rom from Huawei Italia - Download - EMUI (official website) , now I don't have the link .
Inviato da Mountain View
Click to expand...
Click to collapse
Just ignore that notification at phone start ..
It shows only when u restart phone..
Related
THIS IS ONLY A TESTPORT FOR THE P7-L10 based on the P7-L07!
This Rom is only for P7-L10 so don't try it on another Variant!
THIS ROM AS USERS ARE REPORTING IS NOT BOOTING! ON 4PDA and OTHER SIDES PEOPLE ARE WORKING ON A SOLUTION TO FLASH THE NEW ROM TO OUR L10!
IF THERE ARE ANY NEWS I WILL POST THIS HERE! BUT ON THIS ROM'S LTE IS NOT WORKING WHAT IS A ABSOLUTE NO GO FOR ME! SO I WILL WADE FOR L10 RELEASE!
This Rom is modified by me and mush safer to flash then the original L00/05/07/09 variants.
It will not update your'e Kernel or Modem software!
THIS ROM IS PREROOTED!
SO IF YOU FU**ED UP YOURE PHONE OR ANYTHING IS NOT WORKING RIGHT!
YOU FLASHED THIS AND NOT I ! SO IT WAS YOURE DECISION!
HOW TO INSTALL
Flash the rom via TWRP/CWM (MAKE A FULLWIPE!)
reboot!
DOWNLOAD:
https://mega.co.nz/#!UIFQzRoD!GpS1UwX1ge6N7XkvrQ8PTIMYkVqzw9aeglpcovKakGU
As many Users Reporting this Verison is working on L10
4PAD Version from oxalis1970
Flash it via Stock recovery
Download
https://yadi.sk/d/cGZ1_5QkcExNQ
if Lte is working or the rom is multilang i don't no this...
who has tested this pls report back
Phone does not boot
Wich firmware needs to be installed ?.
Cause i see for other P7 wariants need 126 or 125
regards
Superwitschi said:
Phone does not boot
Click to expand...
Click to collapse
What for are rom base have you used before flashing?
And did you make any modifications to the MIUI Rom from l-07 to get it Boot ?
lulisat said:
Wich firmware needs to be installed ?.
Cause i see for other P7 wariants need 126 or 125
regards
Click to expand...
Click to collapse
I think 133SP01 or 135 SP/SP02/03 as they are the latest.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
From 126, no modifications in miui rom.
natorus87 said:
What for are rom base have you used before flashing?
And did you make any modifications to the MIUI Rom from l-07 to get it Boot ?
I think 133SP01 or 135 SP/SP02/03 as they are the latest.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
i tryed all and no bootlop.
Someone was able to make the rom boot and working?
mine boot loop....
mine booting perfect and all is working wery well.
just put first 135sp03 nd then donwload emui3 L7toL10
download emui3 L7-L10 on 4pda extract and put dload folder on sd or interna; card and du the update from the local update.
you can find a link on 84 page on 4pda forum
regards
lulisat said:
mine booting perfect and all is working wery well.
just put first 135sp03 nd then donwload emui3 L7toL10
download emui3 L7-L10 on 4pda extract and put dload folder on sd or interna; card and du the update from the local update.
you can find a link on 84 page on 4pda forum
regards
Click to expand...
Click to collapse
Not bad
Have you tested lte? And is this rom root able? And language is multi?
Sent from my HUAWEI P7-L10 using XDA Free mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
haninatoon said:
Click to expand...
Click to collapse
Please Provide Steps to Flash This
Someone could put 4PDA version in a faster repo please?
haninatoon said:
Click to expand...
Click to collapse
Why the resolution is hd?
rifad20 said:
Why the resolution is hd?
Click to expand...
Click to collapse
ROG Technology from Chinese ROM-s or Screensaver option.
Thanks for this. Finally it is working. But I went back to B135. Sad to say, I can't root 3.0. I'll just go back if this rom can be rooted already.
Can someone pls extract boot.img from this rom or make a backup of it with twrp?
I can not extraxt this image from update.app..
natorus87 said:
Can someone pls extract boot.img from this rom or make a backup of it with twrp?
I can not extraxt this image from update.app..
Click to expand...
Click to collapse
Just Few Hours Back EMUI 3.0 Flashable Zip was released for P7-l07
Its on pan.baidu and i cant access the webpage .... so can someone mirror it
Link to Rom
andromodgod said:
Just Few Hours Back EMUI 3.0 Flashable Zip was released for P7-l07
Its on pan.baidu and i cant access the webpage .... so can someone mirror it
Link to Rom
Click to expand...
Click to collapse
thx but don't try this... the kernel is not right unpacked and repacked so your'e device will hang and reboot on boot splash...
How is the rom stability? I want flash this but i'm scared
Android 6.0 Marshmallow & EMUI 4.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OTA-GRA-L09C432B313
Required for updating GRA-L09C432B200 !!!
Link: https://mega.nz/#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
Mirror : https://goo.gl/2s0pJe
Thanks to raider2k9
Change log:
B200 is required for updating, with B350 it fails at 4%!!!!
hi, thanks for your share ! this version have Touchplus option ?
deraiz12 said:
hi, thanks for your share ! this version have Touchplus option ?
Click to expand...
Click to collapse
Yes
Is it flashable with TWRP or do I need to go back to stock recovery?
How i have to do update- local or with 3 buttons
just make a /dload directory in your internal storage, put the zip with update there and update it through local update
mutaf said:
Android 6.0 Marshmallow & EMUI 4.0
OTA-GRA-L09C432B313
Required for updating GRA-L09C432B200 !!!
Link: https://mega.nz/#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
Mirror : https://goo.gl/2s0pJe
Thanks to raider2k9
Change log:
Click to expand...
Click to collapse
Hi guys, but this firmware is the ufficial update? That will go OTA in Europe?
zar marco said:
Hi guys, but this firmware is the ufficial update? That will go OTA in Europe?
Click to expand...
Click to collapse
yep, that the official one, betatesters receive
raider2k9 said:
yep, that the official one, betatesters receive
Click to expand...
Click to collapse
Ok, thanks. I'm registered at betatesters's program
Inviato dal mio SGP321 utilizzando Tapatalk
Is it possible to go from B350 to B200, then instaling B313? And if yes, could anyone plz provide a B200 donwload link?
olegulen said:
Is it possible to go from B350 to B200, then instaling B313? And if yes, could anyone plz provide a B200 donwload link?
Click to expand...
Click to collapse
Well if you have time you can do it like me... I had a link with full B200 but lost it so I installed B170 from here - if you are on B350, you probably already used this method - and then updated to B200 via OTA and then to marshmallow... It takes a while though.
please, i am on b200 and created the dload folder in internal storage. the update incremental is relevated by updater but when restart in recovery "the ota don't find update.zip".... what can be? thanks
edit: solved inserting dload folder in external sd card
please, how to disable logservice tip???
thanks
myabc said:
please, how to disable logservice tip???
thanks
Click to expand...
Click to collapse
I just swipe it away and it never show again
one81 said:
I just swipe it away and it never show again
Click to expand...
Click to collapse
yes but only temporarly... at reboot it launches again. that log must be permanently disabled for privacy!
myabc said:
yes but only temporarly... at reboot it launches again. that log must be permanently disabled for privacy!
Click to expand...
Click to collapse
remember it´s a beta for testing purpose.. I think you can´t disable it to 100% because it collect information about crash, performance
when i go to install this, it says there is no update.app present and now i am stuck in a bootloop. anyone got any ideas?
brezzz said:
when i go to install this, it says there is no update.app present and now i am stuck in a bootloop. anyone got any ideas?
Click to expand...
Click to collapse
you have to flash the update.zip, not extracted update.app.. since this isn´t a full release!
In a bootloop you have to flash via fastboot the extracted boot.img, recovery.img and system.img from b200 full to get your device back to work
Can someone posts screenshots from battery stats.
Updated kangvip to version M9_B211
Download M9_B211_Кangvip: https://drive.google.com/file/d/0BxUuiDq_FRA_SGFyWFZTNWY2dFk/view?usp=sharing
Original link http: //cn.club.vmall.com/thread-12639964-1-1.html
I've flashed it now. I'll prove that it works
Im totally confused about this phone, too many versions, Im on C635 and I cant find what rom I should use without bricking my phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
lemonade747 said:
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
Click to expand...
Click to collapse
I have L29C567B183 and I flashed this rom B211. It booted up however many functions does not work properly for example I cannot get into developer option, backup and restore will reboot the phone, fingerprinting does not work, .... I flashed Kangvip B186 without problem. I do not think it will work properly on your phone unless your firmware is up to date (B211).
[email protected] said:
I have L29C567B183 and I flashed this rom B211. It booted up however many functions does not work properly for example I cannot get into developer option, backup and restore will reboot the phone, fingerprinting does not work, .... I flashed Kangvip B186 without problem. I do not think it will work properly on your phone unless your firmware is up to date (B211).
Click to expand...
Click to collapse
Thanks for your information. Im on b130 and I have no idea why it cant see any updates on my phone, maybe it's C635 not so popular. btw could you please give me a link to that Kingvip rom b183? I couldnt find it in this forum. Thanks!:fingers-crossed:
lemonade747 said:
Thanks for your information. Im on b130 and I have no idea why it cant see any updates on my phone, maybe it's C635 not so popular. btw could you please give me a link to that Kingvip rom b183? I couldnt find it in this forum. Thanks!:fingers-crossed:
Click to expand...
Click to collapse
There is no Kangvip B183 for Mate 9. Only Kangvip B175, B186, and B211. I am on C567B183 and I flashed KangVip B186 without problem. Since you are on B130 you should start with Kangvip B175 and see if it works.
bscnym said:
Click to expand...
Click to collapse
how to get that windows on screen. cant see any options for that window view on ksettings
got it on adb type: adb shell settings put global enable_freeform_support 1 and reboot then press recent an select square button next to lock app button
nougat freeform move can also be achieved by downloading Root Essentials, scrolling to the interface tab, and selecting freeform mode..
Sent from my MHA-L29 using Tapatalk
lemonade747 said:
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
Click to expand...
Click to collapse
you must have base rom B211 for flash rom kangvipB211. I think you must rebrand to rom china and update ota to B211.
Anybody here already testing it? Any clue if the GPS bug is solved?
rsm86 said:
Anybody here already testing it? Any clue if the GPS bug is solved?
Click to expand...
Click to collapse
I have C567B183 I flashed this rom (B211). It booted up but some functions did not work properly. However I just flashed the boot image from Kangvip 186 and everything works fine.
Maybe auras76 thinking ahead on RomAur 1.6??
Is there anyway to rollback firmware in p20 pro?
If not I will make a change.org petition to get it working
HiSuite
TheDevGuy9497 said:
Is there anyway to rollback firmware in p20 pro?
If not I will make a change.org petition to get it working
Click to expand...
Click to collapse
Yes - from 9.0 to 8.1. Takes a while to download - but I have done it a couple of times.
How do I do this I have no option
TheDevGuy9497 said:
How do I do this I have no option
Click to expand...
Click to collapse
Make sure you have the latest version of HiSuite loaded ( on a Winblows box ). Connect usb - accept installing client of phone - choose Upgrade - and select the downgrade option.
I don't have that option ?
ePearl said:
Make sure you have the latest version of HiSuite loaded ( on a Winblows box ). Connect usb - accept installing client of phone - choose Upgrade - and select the downgrade option.
Click to expand...
Click to collapse
here is screenshot of my hisuite
TheDevGuy9497 said:
here is screenshot of my hisuite
Click to expand...
Click to collapse
Once you select 'OK' - does it not ask if you want to downgrade? Mine does. If it doesn't present that option - not sure why.
ePearl said:
Once you select 'OK' - does it not ask if you want to downgrade? Mine does. If it doesn't present that option - not sure why.
Click to expand...
Click to collapse
Nope I don't get that option
Still have the same issue if anyone can help?
TheDevGuy9497 said:
Still have the same issue if anyone can help?
Click to expand...
Click to collapse
Dude you're still on first beta version.
Rollbacks are always risky
You can downgrade using old hi suite and rollback firmware from funky huawei (paid) or try to use firmware finder erecovery method. There are manuals here on xda, just do little search.
You can also try to upgrade to latest official version and then downgrade to oreo using official channels mentioned above.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
forever_lol said:
Dude you're still on first beta version.
Rollbacks are always risky
You can downgrade using old hi suite and rollback firmware from funky huawei (paid) or try to use firmware finder erecovery method. There are manuals here on xda, just do little search.
You can also try to upgrade to latest official version and then downgrade to oreo using official channels mentioned above.
Click to expand...
Click to collapse
Any idea what hi suite version?
what with frp lock?
what , if the device has a frp lock?
so i cannot enable HDB access in settings.
is there any other free tool ak odin for Huawei?
or can i do it in ANdroid 10 from the recovery booting with that erecovery-entry ?
TheDevGuy9497 said:
Any idea what hi suite version?
Click to expand...
Click to collapse
Man, you need this: https://forum.xda-developers.com/huawei-p20-pro/how-to/guide-force-update-using-firmware-t3963074
Select a 8.1 firmware for downgrade. You find clear instructions at the linked page.
Hello Guys ..,
i have lg g8s LMG810EAW ARE region and there is no android 10 avaiable for my region .
so , i want to flash another region like spain or ..
but , when im using lgup to flashing kdz file , i get 4% on lgup (lgup has been stoped working) .
i dont know my dll is right or wrong but , there is 1 dll dile on internet for this model
this is original firmware number on this device : G810EAW10f_00_0210.kdz Android 9
Please Help .., Thanks
1. Wrong section for this thread.
2. G810???
yes G810EAW .. because i cant find G8s section on this forum
froutanramin said:
yes G810EAW .. because i cant find G8s section on this forum
Click to expand...
Click to collapse
I`m talking about that its section for ROMs, kernels..
You must go to
LG G8 Questions & Answers
froutanramin said:
Hello Guys ..,
i have lg g8s LMG810EAW ARE region and there is no android 10 avaiable for my region .
so , i want to flash another region like spain or ..
but , when im using lgup to flashing kdz file , i get 4% on lgup (lgup has been stoped working) .
i dont know my dll is right or wrong but , there is 1 dll dile on internet for this model
this is original firmware number on this device : G810EAW10f_00_0210.kdz Android 9
Please Help .., Thanks
Click to expand...
Click to collapse
install lgup 1.16.0.3 for lab, then creates the "common" folder in the path c> program files(x86)>lg electronics>lgup>model... copy and paste these 3 files that I upload to mega.
21.53 MB folder on MEGA
4 files
mega.nz
I hope it helps you.
Your browser is not able to display this video.
..
bernavaldiesel1 said:
View attachment 5537321
Click to expand...
Click to collapse
so , in this way can i change region of my G8s (UAE) ARE region to ( Germany ) DEC region !?
there is no major issue when i want to upgrade !? because im bored , everyone is using Android 11 , while i have to use Android 9 :| even i cant find Android 10 for this region
froutanramin said:
so , in this way can i change region of my G8s (UAE) ARE region to ( Germany ) DEC region !?
there is no major issue when i want to upgrade !? because im bored , everyone is using Android 11 , while i have to use Android 9 :| even i cant find Android 10 for this region
Click to expand...
Click to collapse
if the kdz is compatible there is no problem, just that the files are necessary for lgup to recognize the device.
bernavaldiesel1 said:
if the kdz is compatible there is no problem, just that the files are necessary for lgup to recognize the device.
Click to expand...
Click to collapse
from which country do you come from?
bernavaldiesel1 said:
from which country do you come from?
Click to expand...
Click to collapse
iran
G810EAW ARE ( UAE )
bernavaldiesel1 said:
if the kdz is compatible there is no problem, just that the files are necessary for lgup to recognize the device.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
froutanramin said:
View attachment 5560405
Click to expand...
Click to collapse
about android 11 kdz I can't help you. I've googled and haven't seen anything. if you don't have lg bridge installed install it and try software update.