Attached Pics:
Attached Pics:
a. the flat bottom screen protector.
b. the view of the camera from the back. As can be seen it is very open and does not affect exposure.
c. the packaging (plastic)
Review:
Price: £1.89 + £ree p&p
(not the cheapest case i've ever bought: £0.10 for Crystal N95 Case + Screen Protector, but hey what can you do )
The case took about 10 days to be delivered.
The packaging was alright not a cardboard box but the contents were not affected in anyway and for free delivery what can you expect
I was happy that they sent 2 screen protectors, as can be seen in the pics they are not the same. One of which protects some protection to the bottom of the phone beside the keys. One of which does not. I have not yet attached the screen protectors as I do not see as being currently necessary and I'm rubbish at applying screen protectors ( Get bubbles everywhere )
The case itself has a nice orange stitching and a soft velvety interior finish. The velvet itself can be seen to be a dust magnet. I have tested out the compass and the magnetic clasp does not affect it.
Update 24/06/10:
As highlighted by JonPickles below the plastic case securing the phone to the case is tight. I am slightly worried whether repeated removal and installation of the phone will cause damage to the paint of the casing. Also if the phone is not taken out properly the tight fitting can cause the battery cover to come of. As of now I have not found a good way to remove the phone. I am wondering it repeated removal will losen the fitting making it easier to remove. If anyone else has this case or any other tight fitting cases please share any tips on how best to remove it.
link to current posting of case (as of 22/06/10):
http://cgi.ebay.co.uk/LEATHER-CASE-..._MobilePhonesCasesPouches&hash=item2eada05b87
Store of ebay seller:
http://stores.ebay.co.uk/wwfangestore
i bought one too and didnt like how the phone was squeezed into the plastic holder and my battery cover came off when i took it out of holder plus didnt like the securing tab in my ear when makin/answerin a call so bought another that was completely leather and the tab was not in the way for £3.50 from hong kong which came in ten days also
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190399620812&ssPageName=STRK:MEWAX:IT
I didn't like the leather insert into which the phone goes. But everyone has their own tastes.
Great case for that price, it's really cheap and do the job perfectly, thanks for this share
Just got it
It barely fits the phone with INVISIBLE FULL BODY ZAGG SHILED ! My zagg shield got ripped of my phone and destroyed zagg shield. + it did not fit. My batteri cover came of and its really hard to take the phone out , dont like it at all
Thanks for the info m4sta2k, I'll stay clear of this one then.
The same story
jonpickles70 said:
i bought one too and didnt like how the phone was squeezed into the plastic holder and my battery cover came off when i took it out of holder plus didnt like the securing tab in my ear when makin/answerin a call so bought another that was completely leather and the tab was not in the way for £3.50 from hong kong which came in ten days also
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190399620812&ssPageName=STRK:MEWAX:IT
Click to expand...
Click to collapse
The same story - slightly different characters:
Beware of snap-on hard cases! I mean you have to be very careful and do not go for the cheapest ones. My sad experience with one of them, very similar to this one brought me to this rather obvious conclusion. What happened is that in 3 weeks gray paint/covering of my HD2 was damaged wherever it touched the sturdily snapping hard case - on the corners battery cover (where the gray plastic body of HD2 slightly is raised comparing to lower battery cover) - I will post photos of it.
Then I ordered a leather pull-case, and i am happy with it. Here is my positive review for it
Ok so i dont think many of us are impressed with the current available cases for out n7's
we seem to have to pick between protection-price-visual appeal.
we dont seem to have a case with all 3 .
so im implying my project idea,
im goin to check in at my old high school. where i remember in "Design&tech" we used "vacuum forming" machines to heat hard plastic sheets and re-mould them into covers and shapes over a pre-made wooden mould.
im goin to put forth an idea to create a case from shock-absorbent hard plastic front and back that either clip or screw closed. the next part of the project would be to imply some kind of clear glass screen area. one that conducts touch-responsiveness, good for display, and scratch/shatter resistance,.
im thinking after a few attempts we may be able to pre-cut the required "pattern" to perfectly fit to each edge while heat-moulding if so would could then attempt cutting the button/rocker area's then re-attaching them with a stretchy silicone between the actual button cover to make a professional finish to the buttons
so we would end up with a Hard shock resistant Full back/corner surface cover with clear scratch resistant full screen glass face and silicone set button rockers and attached plugs to insert into usb/headphone ports to keep out dust.
this is a 1 hour idea so far do you guys think its worth pursuing?
im think the school maybe interested as if this project works and can be made at a cheap price they could look into marketing it.
i would make sure xda'ers get a discount thou lol :good:
i too hate all the cases. ended up settling for a fitfolio which provides the protection i want without covering the edges of the screen.
however, the ideal case i think would be one that provide protection for corners, silver bezel (just the silver bezel, not wider), and raised edge for front protection. an added bonus would be a sturdy kickstand like the ones on the trident kraken case.
does it have to be hard plastic?
i think TPU material would be better for shock absorption.
TPU
I have an idea, we buy one of these or similar, then 2 small magnets in the nexus 7 back plate, then make a magnetically attached flap, like in the ipad
http://www.cruzerlite.com/cases/asus/nexus7/cruzerlite-androidified-clone-army-for-asus-nexus-7
Sagar96 said:
I have an idea, we buy one of these or similar, then 2 small magnets in the nexus 7 back plate, then make a magnetically attached flap, like in the ipad
http://www.cruzerlite.com/cases/asus/nexus7/cruzerlite-androidified-clone-army-for-asus-nexus-7
Click to expand...
Click to collapse
I like the idea, and maybe add groves in the front flap so we can stand the device up to watch movies too?
chismay said:
Ok so i dont think many of us are impressed with the current available cases for out n7's
we seem to have to pick between protection-price-visual appeal.
we dont seem to have a case with all 3
Click to expand...
Click to collapse
If you want to design one yourself go for it and let us see the results but don't try to get consensus on what is ideal because you will be waiting forever, you can't make a case that's all things to everybody.
NewbCentral said:
I like the idea, and maybe add groves in the front flap so we can stand the device up to watch movies too?
Click to expand...
Click to collapse
Im just wondering if i mount magnets in the inside of the back cover on the left hand side, will it affect any of the electronics (they will be mounted near the corners so it doesn't trigger the magnet switch. Then i can get my mom to sew me a flap with magnets, and have a legit apple style "smart cover"
I loved the one for the M7 and had to get it for the M8. Pics in the imgur link.
IMO the best aluminum bumper out there.
They fixed the tactileness of the volume button and cutouts are perfect. I particularly love how they cut out the top for the IR blaster. The edges are flush with my glass screen protector. The bolts are now allen key hex head with bigger bolt heads. PS didn't affect my reception on both the M7 and M8 for Tmo US.
http://imgur.com/a/EmIRy#0
Warning didn't sort.
PcFish said:
I loved the one for the M7 and had to get it for the M8. Pics in the imgur link.
IMO the best aluminum bumper out there.
They fixed the tactileness of the volume button and cutouts are perfect. I particularly love how they cut out the top for the IR blaster. The edges are flush with my glass screen protector. The bolts are now allen key hex head with bigger bolt heads. PS didn't affect my reception on both the M7 and M8 for Tmo US.
http://imgur.com/a/EmIRy#0
Warning didn't sort.
Click to expand...
Click to collapse
Looks really nice. Price is a little too steep for me though. $50 for an aluminium bumper when there are a few for less than half that. I am wondering if it is worth the premium.
kennonk said:
Looks really nice. Price is a little too steep for me though. $50 for an aluminium bumper when there are a few for less than half that. I am wondering if it is worth the premium.
Click to expand...
Click to collapse
You're right. I have bought a couple $10 ones off eBay. Those were flimsy compared to the DevilCase and the buttons never worked for me. The DC is easy to slip on and it seems like they put effort into it if that helps.
Though I'm the kind of guy that would buy $70 custom dbrand skins.
What did this cost you if you don't mind me asking? Have you noticed any issues with signal?
The lanyard loop on the bottom has basically sold me on this case.
I saw a 60FPS sample video from a concert on Reddit. That video sold this phone to me.
However I WILL NOTE bring my phone to a concert as crazy as I go with no wrist-strap.
This is the only case I've seen so far with one. Anyone know of some others with lanyard loops?
Finally, a proper bumper for M8.
I've tried *all* the cheap variants, ~$10 each(likely produced by same factory), extremely thin, their fits are not snug, your phone may slide around, even scratch itself on the case. I added a layer of soft electrical tape all around the internals to get them to fit better. Impacts on the corners will easily dent/bend the cases such that they may not fit anymore. One of them even sliced INTO the back of my phone, chipping the corners(a painful sight). After a while(~1 week), they'll start expanding, becoming looser around the middle and developing a soft bulge.
This costs roughly $32 USD, I'm not sure about shipping(I can only read simplified chinese). If I'm not wrong, each package comes with 5 sets of stickers for the front and back(shown in the video). Best part is that the bumper is designed just well enough to keep elevate the back of the phone off the table when placed on its back(shown in last image), none of the cheaper variants do that, though one of them do have thick fronts, suggesting to place the phone screen-down(no contact).
OP, please help clarify what I couldn't! And nice find!
This case looks great. I don't know of any cases off hand that have an IR cutout. I can't believe they make so many cases without that.
ULAMSS5 said:
Finally, a proper bumper for M8.
I've tried *all* the cheap variants, ~$10 each(likely produced by same factory), extremely thin, their fits are not snug, your phone may slide around, even scratch itself on the case. I added a layer of soft electrical tape all around the internals to get them to fit better. Impacts on the corners will easily dent/bend the cases such that they may not fit anymore. One of them even sliced INTO the back of my phone, chipping the corners(a painful sight). After a while(~1 week), they'll start expanding, becoming looser around the middle and developing a soft bulge.
This costs roughly $32 USD, I'm not sure about shipping(I can only read simplified chinese). If I'm not wrong, each package comes with 5 sets of stickers for the front and back(shown in the video). Best part is that the bumper is designed just well enough to keep elevate the back of the phone off the table when placed on its back(shown in last image), none of the cheaper variants do that, though one of them do have thick fronts, suggesting to place the phone screen-down(no contact).
OP, please help clarify what I couldn't! And nice find!
Click to expand...
Click to collapse
They're $49.99 on Amazon Prime. (USA) I wanted a premium bumper for my premium phone.
http://www.amazon.com/DevilCase-Alu...=merchant-items&ie=UTF8&qid=1407767057&sr=1-2
Black, Titanium Gray, Silver, Red, Champagne Gold.
Looks like all that's available are Red, Blue and Silver
I don't think US customers get a skin (mine didn't)
DevilCase only officially sells through Amazon to the US. I have my dbrand on anyway.
EDIT: The skins are about $8 USD
http://www.amazon.com/DevilCase-Bac..._3_m?s=wireless&ie=UTF8&qid=1407767701&sr=1-3
Half the price of the dbrand (Except it looks like the front doesn't wrap around like the dbrand)
But yeah, I had the same bumper for the M7 and threw my phone around no problems. No flex to the bumper at all.
xHighAlert said:
The lanyard loop on the bottom has basically sold me on this case.
I saw a 60FPS sample video from a concert on Reddit. That video sold this phone to me.
However I WILL NOTE bring my phone to a concert as crazy as I go with no wrist-strap.
This is the only case I've seen so far with one. Anyone know of some others with lanyard loops?
Click to expand...
Click to collapse
Yeah, they actually boast about it on their website lol.
EDIT: Just got to work, where I normally have crappy T-Mo US coverage. It's about the same. Don't notice any difference in signal when I'm redditting.
Hey just so you guys know, you can order from the taiwan website! They will ship it international and include a guide to purchase for foreigners as well. The grey seems to be out of stock on anything but the taiwan site, so I am going to try ordering from there!
I hope they make it in plastic or polycarbonate. Metal just kills the reception.
citronbull said:
I hope they make it in plastic or polycarbonate. Metal just kills the reception.
Click to expand...
Click to collapse
I think that's why they left the top of the phone uncovered. Since the M8 is wrapped in metal except for the top and the screen, most of the antenna are likely to be at the top, so this wouldn't interfere with signals so much. Then again, this is just a guess.
The previous bumpers I've used which wraps around entirely do noticeably affect signal strength, though.
ULAMSS5 said:
I think that's why they left the top of the phone uncovered. Since the M8 is wrapped in metal except for the top and the screen, most of the antenna are likely to be at the top, so this wouldn't interfere with signals so much. Then again, this is just a guess.
The previous bumpers I've used which wraps around entirely do noticeably affect signal strength, though.
Click to expand...
Click to collapse
The antenna goes under the white strips on the back.
The top is just for the IR blaster, really.
PcFish said:
The antenna goes under the white strips on the back.
The top is just for the IR blaster, really.
Click to expand...
Click to collapse
Received mine here in Germany from Taiwan today, ordered directly from their website. Took 9 days, price including shipping was 37,50 €, plus 7,19 € import tax, which I payed when I picked it up from customs.
No reception loss, fits perfect, and the skins are included (all available colours).
Best decision since buying the One M8. :good:
Ordered mine one week ago from France.
For those people like me from country where it is impossible to ordered in amazon.com, here is my workaround, shipito.com.
Make an account on that site, pay 5 dollars, get an US address, send the DevilCase to the US address.
When shipito receive it, send it to your address.
Will post pictures when getting mine
Bumper
So just to clarify, if you have the face up the back is completely off the surface it's laid on? And likewise if the screen is down? I really like the look of it, and really interested.
NegativeOne13 said:
So just to clarify, if you have the face up the back is completely off the surface it's laid on? And likewise if the screen is down? I really like the look of it, and really interested.
Click to expand...
Click to collapse
Correct, Face down, the bumper is flush with my glass screen protector. Just enough to lay flat but not touch the front. On the back the lip is higher on the top and bottom and it's curved a little bit.
After reading this thread and since I wanted to switch to a more pocket-friendly protection (used UAG Maverick semi-clear case before hand, which was excellent but slightly bulging in pocket), I decided to order this bumper from their Taiwanese website.
Ordered the gray color, a perfect match to the gunmetal M8 if you ask me.
Had to pay approx. 9.7$ (USD, that is) for customs fee, which is slightly annoying but that's not Devilcase's fault.
The bumper itself is very well build and precisely cut, feels very durable, volume buttons are responsive and easy to press, cut outs for USB + headphone + IR blaster are generous and the lanyard hole is a nice extra (if a matching color lanyard was included that could be nice too ).
The bumper came with five stickers: Gold, Blue, Black and 2 different shades of Gray. The stickers have brushed metal texture on them but the texture goes vertically whereas the M8 had a horizontally textured body.
Personally, I have a naked SlickWraps sticker on my device so I haven't tested Devilcase's stickers but someday in the future I'll probably want to change things up a bit and will find them useful.
Protection is excellent as the front has a tiny lip and the back has a curve that lifts the device from the surface it sits on.
Overall, excellent bumper. Not a cheap case, price-wise and quality-wise.
Very recommended for those who want minimum bulk yet high quality material and fashionable protection.
Thank you for letting me know about this case and hope this mini-review helped others too
@PcFish - Where'd you get that back cover from?
I just ordered them today ! cant wait until I get them.. ive been living off incipio case for awhile
nice find OP
HarryManback said:
@PcFish - Where'd you get that back cover from?
Click to expand...
Click to collapse
https://dbrand.com/
This case is not sold in the US yet but I got mine on ebay for $50.
The case is not what I expected. I thought the flip cover would clasp or stay closed but the cover slides when using one handed.
Pros:
Case adds slight bumper on top, bottom and sides of device.
Good material, very soft
Easy NFC pairing
Volume and camera buttons are protected.
Cons:
Not transparent (off blue)
Nothing to keep flip cover in place (maybe velcro or a double sided tape might help)
Flip cover constantly slides
Takes away from the aesthetics of the device
Tbh, I'd like to remove the flip cover. I wish Sony would've released a case w/o gimmicks.
A couple extra photos since I can't add more thru the mobile app ?
I have this one as well as the leather solid front version which folds back behind a lot easier once the leather softens... this clear (frosty semi clear ) version, I think, is meant to be held sort of like a book with one hand holding it open while the other uses the touch screen. At least that's how I see most people using it on the trains in Tokyo.
The original Sony cases seem to be unnecessarily expensive.
If you get them in Japan the yen vs dollar helps ease that a bit. They are very well made though .
Does anyone have a dump of the nfc data contents of this Style cover?
So I'm about to replace my S6 Edge with an S7 Edge in Black Onyx. The only thing I hate about not having an iPhone is the general lack of good leather back covers.
Now obviously Samsung do an official leather cover for the S7/S7 Edge, and I've seen reviews Etc., but I can't find anything on how it holds up long-term.
Does the leather develop a nice patina like the official iPhone cases, or does it wear and start to peel like cheap PU leather cases? Would love to see some pics. Also I'd like the brown but I've heard it's more of a tan colour, does it darken with age, or is the black better for a black phone?
Aside from that if you've used it, do you recommend it as a long-term prospect? If not what did you end up using?
Thanks
I have the leather case for the S7E for about 9 Months now. Basically, it is damaged now, so last week I ordered a new case. The leather on the backside is okay (you see a few scratches but it is not bad). On the sides, the leather is pretty much gone, through the friction when I pull it out of my pocket it quite smooth now, so no leather feeling anymore.
Biggest problem is one corner, don't know how but it’s got a crack a few weeks ago. With the time, this crack got bigger and now the corner broken off.
But the protection was very well, dropped the phone a few times no damage on the phone at all (the crack do not come from one of the drops before someone asks)
All in all, I would not buy this case again, at least not for the price I paid back then.