Here's a pre-rooted stock Lollipop for locked & Unlocked bootloaders (I've not tested on Unlocked Bootloader) with [Nut]'s Dual recovery.
Made on latest D6502 23.1.A.0.726 Indian version might work on other variations of Z2.
Install Instructions
1) Reboot in recovery and flash the zip
2) Flash The Zip: D6502 23.1.A.0.726 IN.zip
3) Reboot
Link: https://drive.google.com/file/d/0B7hR3gLMx07tOHFhNE9WdmZYTUk/view?usp=sharing
Anyone is welcome to mirror the link
Credits: @[NUT]
Sony for the stock Rom
Sorry for the typo in the subject the LP version is 5.0.2 =
is there any way to get recovery on the rooted lollipop rom?
adi7yli3 said:
is there any way to get recovery on the rooted lollipop rom?
Click to expand...
Click to collapse
This rom contains the recovery. If you are already on a rooted 5.0 rom then you can try installing the recovery from http://forum.xda-developers.com/showthread.php?t=2785598
I'm curious of which customization version is this, like R7C.
Waiting deodexed version from you
Hello, i'm on the existenz 4.5 D6502 , Can i flash this lollipop rom ?
If yes give me the procedure.
Thank u
moba1700 said:
Hello, i'm on the existenz 4.5 D6502 , Can i flash this lollipop rom ?
If yes give me the procedure.
Thank u
Click to expand...
Click to collapse
as far as i know the procedure for installing lollipop is same as all roms before so it goes like that... 1.go to recovery 2.wipe(factory setings) 3. flash this rom and reboot. this rom contains STOCK FIRMWARE so no need to flash stripped ftf also it has ROOT and RECOVERY so there is no worries of loosing it.hope i helped u
Thank u cocagenda2 , but what about the kernel
Should i flash a lollipop kernel ? becouse i'm on kitkat now
I tried to update from 690 w/o wipe nothing, it's working but do not use .690 mods like framework or else - not compatible
moba1700 said:
Thank u cocagenda2 , but what about the kernel
Should i flash a lollipop kernel ? becouse i'm on kitkat now
Click to expand...
Click to collapse
no need to flash lollipop kernel becouse this rom has it in flashable zip so it will flash a lollipop kernel when u install this rom...if u end up somehow in bootloop then u CAN flash KERNEL but i think u wont need that :fingers-crossed:
After flash this fw i have no Signal. no baseband
fumanschuh said:
After flash this fw i have no Signal. no baseband
Click to expand...
Click to collapse
you sure you have D6502 model and not D6503? wont work on that.
Damn you are right i have a D6503. And now?
ok now it works
flashed and working fine
thank u
Sorry guyz for the delayed response down was down with flu....
babydown said:
Waiting deodexed version from you
Click to expand...
Click to collapse
Tried to deodex but was getting many FC's so din't upload the deodex file
cocagenda2 said:
as far as i know the procedure for installing lollipop is same as all roms before so it goes like that... 1.go to recovery 2.wipe(factory setings) 3. flash this rom and reboot. this rom contains STOCK FIRMWARE so no need to flash stripped ftf also it has ROOT and RECOVERY so there is no worries of loosing it.hope i helped u
Click to expand...
Click to collapse
Thanks @cocagenda2 for replying to other users and helping on installation queries....
Which version of NUT recovery is there in this zip?
hello @puneethv...well since im on android for a few years already and have flashed tons of roms on different devices i think i can try my best to help those who are new to this...hope i sad it right for that instaling procedure, cuz for me it worked flawesly. cheers
get installed .zip successfully but the rom seems to be not installed
i reboot to recovery, wipe then flash the zip file.
am i doin it wrong?
used twrp and cwm, they said md5 file not found so i think thats the problem?
cdorepm said:
get installed .zip successfully but the rom seems to be not installed
i reboot to recovery, wipe then flash the zip file.
am i doin it wrong?
used twrp and cwm, they said md5 file not found so i think thats the problem?
Click to expand...
Click to collapse
try to re-download the file. i think it got corrupted.
kunaltyagii said:
try to re-download the file. i think it got corrupted.
Click to expand...
Click to collapse
finally succeed..but now, i have new issue.. memory unavailable in album
---------- Post added at 03:43 PM ---------- Previous post was at 03:10 PM ----------
cdorepm said:
finally succeed..but now, i have new issue.. memory unavailable in album
Click to expand...
Click to collapse
ok, its fine now.done factory reset
---------- Post added at 03:44 PM ---------- Previous post was at 03:43 PM ----------
cdorepm said:
finally succeed..but now, i have new issue.. memory unavailable in album
Click to expand...
Click to collapse
ok, its fine now.done factory reset
Related
Hi this is CWM for locked bootloaders Alot of stuff is working test it yourself.
Download here: http://www.mediafire.com/?885wnu7x259r5q3
Instruction
1. Root your phone
2. Enable usb debugging
3. Run install file in CWM folder
How to Enter Recovery
Boot the phone and keep pressing volume down key and you will be booted into recovery. Move up and down with volume key and press power button to select
CWM Flashable Zip: http://www.mediafire.com/?5qdmrqpppmqsi97
Flashable Superuser: http://www.mediafire.com/?22zetxlmoh2hgj2
Flash this after flashing rom otherwise your phone will keep rebooting if you try to edit system files: http://www.mediafire.com/?1pxba0sjo2n3gzu
This was orignaly made for xperia GX and SX but it works fine on xperia T tested by myself
Thanks to crazy_Doze for modding the recovery
Sharaz22 said:
Hi this is CWM for locked bootloaders
Instruction
1. Root your phone
2. Run install file in CWM folder
Click to expand...
Click to collapse
Many thanks, but can you edit the title to say this is for only the older firmware, as people with locked bootloaders cannot root the newer firmware, it may cause false hope and lots of annoying questions....
many thanks dude, lot of people are waiting for that ... i test it now and report
---------- Post added at 06:01 PM ---------- Previous post was at 05:28 PM ----------
vinss68 said:
many thanks dude, lot of people are waiting for that ... i test it now and report
Click to expand...
Click to collapse
all is ok cwm run on my phone. i download some rom for testing.
some report. of course cm paranoid ... arn't run with this BUT...romaur it's ok but not recommanded... AND the new firmware deodexed by gregbradley run and it's rooted with locked bootloader ssoooo gooood rom is very fast . greg put it on your allinone i think it's a good news
will do, but will do tomorrow, sleep now
of course it's not a hollydays for all eheh.
how can i flash it on windows?
is there any guide for doing step by step?
erhangulsum said:
how can i flash it on windows?
is there any guide for doing step by step?
Click to expand...
Click to collapse
connect phone to computer and just run the install.bat file
gregbradley said:
connect phone to computer and just run the install.bat file
Click to expand...
Click to collapse
It doesnt install cmw for me. i have rooted a1.303 stock rom.
it didnt work.
Hi !
first, thanks ! it's amazing !
second, I have a question, after installed this, we can flash all the rom like AOKP, CM... or just rom who are make for locked bootloader (like http://forum.xda-developers.com/showthread.php?t=2007736) ?
Thanks a lot men !
Meelouw said:
Hi !
first, thanks ! it's amazing !
second, I have a question, after installed this, we can flash all the rom like AOKP, CM... or just rom who are make for locked bootloader (like http://forum.xda-developers.com/showthread.php?t=2007736) ?
Thanks a lot men !
Click to expand...
Click to collapse
no, you need unlocked bootloader for those. You will have to stick to stock based roms like mine
gregbradley said:
no, you need unlocked bootloader for those. You will have to stick to stock based roms like mine
Click to expand...
Click to collapse
ok Thanks !
this worked ok, but after flashing Assaye V 003, i can't get into recovery, i re-ran install.bat, still the same, pressing volume down does not enter recovery anymore.
I was rooted the second time round too.
spida_singh said:
this worked ok, but after flashing Assaye V 003, i can't get into recovery, i re-ran install.bat, still the same, pressing volume down does not enter recovery anymore.
I was rooted the second time round too.
Click to expand...
Click to collapse
volume up to get to recovery
doh.. cheers mate
Volume up doesnt work either, does when on .303, but after flashing .195, no joy in getting into recovery
Would this work on the Xperia TL running .303 rooted?
spida_singh said:
doh.. cheers mate
Volume up doesnt work either, does when on .303, but after flashing .195, no joy in getting into recovery
Click to expand...
Click to collapse
Hmmm... It works for me
Just after flash .195, I re-installed recovery - install.bat
I think we need to make sure we are on stock 195 kernel. Try flashing this in flashtool and see if it works then
Im on a stock kernel, now on the FTF Kernel your provided in your ROM thread, for some reason, when i flash your ROM, CWM gets removed, i can't go back into it, i have to flash .303, and then use CWM to flash your ROM, i had to do this to upgrade form 003 to 004.
Locked bootloader, running Assaye v4. thanks to CWM. we just need a flashable version to flash after we flash roms.
You rock bro.
Device : Xperia T locked to rogers, rooted and free from carrier apps.
Im on a stock kernel, now on the FTF Kernel your provided in your ROM thread, for some reason, when i flash your ROM, CWM gets removed, i can't go back into it, i have to flash .303, and then use CWM to flash your ROM, i had to do this to upgrade form 003 to 004.
Click to expand...
Click to collapse
There's an easy fix for this as i just came from the xperia s and had to deal with a locked boot loader on it as well.
We need a flashable version of CWM. this way after you flash a rom before you reboot your device you install CWM, then reboot. then you have ROM and CWM.
I guess you could also try and run the bat file again. (didn't work.)
Hi,
I am using Xperia SP, C5302, with Android version: 4.3 and Firmware: 12.1.A.205. I want to install CyanogenMod 11 in my mobile.
Going though different tips and tricks, I was able to root my phone, as well as unlock the bootloader. However, I'm unable to install a custom recovery. It is advised everywhere not to proceed with installing any custom ROM without installing custom recovery.
Currently not able to install CWM recovery in my phone. Also when I tried to boot my phone into recovery, it is not working. Is it because there are no custom recovery installed?
If anyone can tell me how to install the custom recovery in my system, will be very helpful. I've tried installing ROM Manager from Play Store, but it is unable to recognize my device. Also Quick Boot app from Play Store is not able to boot into recovery mode. Also tried using Flashtool and fastboot, not working either. :crying:
Right now, I'm not able to proceed with installing CM11 ROM in my Xperia because I'm afraid I will not be able to boot into recovery mode and hence will not be able to complete the installation and ultimately end up with a bricked phone.
Any help will be greatly appreciated..!!
Regards,
~Ayan
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Nevermind...
deathviper said:
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Click to expand...
Click to collapse
Thanks deathviper. Followed the instructions and got it installed. Also completed installing CM11 ROM in my Xperia. The link was very helpful. I also followed this link: http://www.teamandroid.com/2014/03/...11-xperia-sp-c5302-c5303-kitkat-custom-rom/2/ to install CM11 ROM in my Xperia SP.
Thanks again..!!
rbertoche said:
I've allways thought that a locked bootloader would break your boot to a non-stock kernel. I think I read it from doomlord.
Now I wonder if it only blocks fastboot...
Recently I saw a post about CM10.2 working on locked devices... Now you're saying the same, maybe it started working lately somehow...
Though... Sure you saw that work?
I'm about to relock my device and take my chances, should get to it
Update: You may not want to test something for the first time... This one is tested: http://forum.xda-developers.com/showthread.php?t=2649923
It's a much longer way. To start with you must get root and CWM recovery on 4.1.2, only to get ROOT on 4.3.
Click to expand...
Click to collapse
i was talking bout ubl.... not lbl
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
rbertoche said:
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
no prb.... always try to clear your thought and others tooo...
deathviper said:
no prb.... always try to clear your thought and others tooo...
Click to expand...
Click to collapse
I flashed my xperia sp ( same firmware ) to candy5 using the same method . But I did not flash Gapps in one go . After booting the new ROM everything works fine but I am unable to get into recovery now( remains stuck in sony logo) . I used Rashr , the CWM SP too which I used it when my phone was on stock ROM . Left without essential Gaaps . Please help .
you can do this
Download xperia recovery manager from play store
Hey guys!
As Google recently announced Lollipop update for Android one in upcoming weeks, Everyone want to go back to stock ROM to get the official update. SO here I present you the stock ROM flashable zip
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE!!!
Why this?
Yes, there are other ways of reverting too, but why this method?
Easy to use
No risk of IMEI erase
No additional software/drivers required
Stock recovery not required
Hastle free
How to?
Its easy. Just flash as any other custom ROM
Download the zip and place it in your sdcard
Reboot to recovery
Wipe data, cache, factory data reset
Install zip from sdcard
Navigate to zip and install
Reboot
Screenshots
Downloads and F.A.Qs in second post
Download
http://www.mediafire.com/download/k470f8wohaf0pg0/sprout_stock_KPW53.zip
F.A.Q
Will I get lollipop update?
You might get lollipop update, but mostly, you won't be able to update
Will this work on my phone?
It works on the first three Android One phones i.e. Micromax Canvas A1, Karbonn sparkle V, Spice Dream UNO Mi-498.
This is tested in Micromax Canvas A1 only, though
Is it rooted?
No. It is the full stock firmware
Do I need to install gapps?
No. The stock firmware already has Google apps
Which recovery should I use?
It is tested in Philz recovery. But TWRP and CWM should work too
Any tweaks applied?
No. Its just stock
deodexed or odexed?
I just said it is 'stock' ROM, like 3 three times now. You still ask?
can this rom be flashed over cm11 or pac rom?
drsiddique5700 said:
can this rom be flashed over cm11 or pac rom?
Click to expand...
Click to collapse
Yes just check the installation method
For ota I need stock recovery and locked BL, right?
Joyarup said:
For ota I need stock recovery and locked BL, right?
Click to expand...
Click to collapse
Right. But I'll try to make it compatible with custom recoveries too
Reply please
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Kickstan said:
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Click to expand...
Click to collapse
It would be great if you can give me more details on the error. And if you are on lollipop, make sure you formated system partition before flashing
Urgent reply please
Sir..i not on lollipop..I am using cm 12.1..so I wanted to go back to stock from..so as it was written..I downloaded the zip and pasted in SD card..den u turned it off...went to philz recovery..den I searched for the file...I clicked on install new rom...den I searched the file in external SD card..den as soon as I clicked on in..something happened down the procedure and error dats all...I want to know dat I am currently using cm 12.1...by using our zip file will I go back to stock or not..as it say error...I'll send u a screen shot soon...but do reply on dis urgent thank you sir...
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Will this work on aq4502 ?
Did this actually work for anyone?
ASHU9668 said:
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Click to expand...
Click to collapse
Flash this stable KPX44 version of Android 4.4.4 rom on your device, this is the last & latest Kitkat build for our devices.
Link - KPX44 Kitkat
Compatibility -
*.Sprout4 & sprout8.
Credits -
*. 1cefire
plz upload the link of karbonn sparkle v h/w v1.1 s/w kpw53
5.1.1 OTA (only for karbonn sparkle v) is attached with this post. I received it today morning.
It is official OTA from google and can be flashed via stock recovery.(only for karbonn sparkle v)
For all android one devices:
CWM backup flashable via philz recovery can be found here..
https://mega.co.nz/#!A5s0TRgQ!0wYaJ7ZCqEKQBx5zxQJ9d8JeSigKKTXdV4q6v9U-Z_Y
Steps for flashing:
1. unzip the downloaded file.
2. CREATE FOLDER clockworkmod/backup inside ext sdcard
3. place the extracted folder (2010-01-01.00.02.00_LMY47V) in clockworkmod/backup.
4. reboot into philz recovery and go to backup and restore.
5. then select custom restore from external sd card, select only system and boot.img.
6. select 2010-01-01.00.02.00_LMY47V and click on boot.img
7. reboot to system. (first boot may take some time)
Enjoy...
Hit thanks if i helped u.. it wont cost u anything
FAQ
1. will it work on canvas a1, dream uno etc...?
- yes it will work on all android one devices
2. what are changes in 5.1.1?
- camera (especially video recording is smooth)
3. what doesn't work in 5.1.1?
- Everything works (viper4android, dolby, xposed alpha 5.1.1, gravitybox, Lolistat, Lpthemer and other modules )
4. I am on stock rom, bootloader unlocked, unrooted what should i do?
- download update.zip attached in this post, place it in sdcard, apply update.zip from stock recovery (will work only on karbonn sparkle v)
will it work on canvas a1? i om on currently cm 12.1 beta 4 with philz recover? will it work?
Can you Give me the Oem.prop of Sparkel V
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
sagar27691 said:
will it work on canvas a1? i om on currently cm 12.1 beta 4 with philz recover? will it work?
Click to expand...
Click to collapse
You Need to go back on stock rom And Need to Edit oem.prop. otherwise it not installed...
Sorry for my bad English
Md Belayet said:
Can you Give me the Oem.prop of Sparkel V
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
You Need to go back on stock rom And Need to Edit oem.prop. otherwise it not installed...
Sorry for my bad English
Click to expand...
Click to collapse
Oem.prop
Here u go
Press thanks if it helped
ohk thanks for the reply bro... otherwise 1 person tried to make fun of my this question on fb group
Thanks i will revert back to stock... one more question can i directly get the 5.1.1 update after reverting back to stock kitkat or i have to be on 5.1 to get this 5.1.1?
abhijitkadam03 said:
Oem.prop
Here u go
Press thanks if it helped
Click to expand...
Click to collapse
Thanks
abhijitkadam03 said:
5.1.1 OTA is attached with this post. I received it today morning.
It is official OTA from google and can be flashed via stock/custom recovery.
Click to expand...
Click to collapse
what about canvas a1?
This works only if you have a 100% stock ROM. I have 5.1 with ROOT,Xposed Framework,deleted useless system apps and it fails.
abhijitkadam03 said:
5.1.1 OTA is attached with this post. I received it today morning.
It is official OTA from google and can be flashed via stock recovery.
Click to expand...
Click to collapse
If possible please upload stock recovery of LMY47V.
Thank u.
can anyone please provide stock recovery of lollipop
can I use it on spice... w/o editing oem.prop
thesaurabh7777 said:
can I use it on spice... w/o editing oem.prop
Click to expand...
Click to collapse
Nope.. U can't. I already tried editing oem.prop and it didn't work. I guess we need stock recovery of LMY47O.
Sent from my Mi-498 using XDA Forums
abhijitkadam03 said:
5.1.1 OTA is attached with this post. I received it today morning.
It is official OTA from google and can be flashed via stock recovery.
Click to expand...
Click to collapse
danutzgtx480 said:
This works only if you have a 100% stock ROM. I have 5.1 with ROOT,Xposed Framework,deleted useless system apps and it fails.
Click to expand...
Click to collapse
I have enabled multiuser by editing build.prop, reduced the size of boot animation and have rooted several times but currently I'm on stock ROM with stock recovery unrooted and locked BL. Will it work on my A1?
Because Previously i tried in the morning it went into a Bootloop.
Help!
Sent from my Micromax AQ4501
Which recovery (kitkat or LMY47O)?
prspuri9 said:
I have enabled multiuser by editing build.prop, reduced the size of boot animation and have rooted several times but currently I'm on stock ROM with stock recovery unrooted and locked BL. Will it work on my A1?
Because Previously i tried in the morning it went into a Bootloop.
Help!
Sent from my Micromax AQ4501
Click to expand...
Click to collapse
Solution 1:
1.Put phone in fastboot mode
2.Boot into TWRP using
Code:
fastboot boot twrp-2.8.6.0-sprout.img
3.Make a backup
4.Reboot into stock recovery and flash update.zip
5.Boot again into TWRP and wipe dalvik cache
6.Reboot and should work
Solution 2:
1.Flash stock Android 5.0 using SP Flash TOOL
2.Flash update.zip using stock recovery
danutzgtx480 said:
Solution 1:
1.Put phone in fastboot mode
2.Boot into TWRP using
Code:
fastboot boot twrp-2.8.6.0-sprout.img
3.Make a backup
4.Reboot into stock recovery and flash update.zip
5.Boot again into TWRP and wipe dalvik cache
6.Reboot and should work
Solution 2:
1.Flash stock Android 5.0 using SP Flash TOOL
2.Flash update.zip using stock recovery
Click to expand...
Click to collapse
Will Philz Work?
Sent from my Micromax AQ4501
prspuri9 said:
Will Philz Work?
Sent from my Micromax AQ4501
Click to expand...
Click to collapse
Sure.Any custom recovery.
Thanks for publishing this update installed on my sparkle V made is very much responsive
stock recovery
Can i flash through stock recovery
ajitshenoy said:
Can i flash through stock recovery
Click to expand...
Click to collapse
If u have karbonn sparkle V ( with unharmed system ) u can flash the ota update via stock recovery. Else download the file given in OP and flash via philz
Hit thanks if i have helped
Friends please help me to return to stcok ROM. I am using custom ROM and TWRP recovery. I want full stock i.e. Stock ROM+Stock Recovery. My device model is x526 Snapdragon. Please tell me easy procedure.
Thanks in advance.
fadingstar said:
Friends please help me to return to stcok ROM. I am using custom ROM and TWRP recovery. I want full stock i.e. Stock ROM+Stock Recovery. My device model is x526 Snapdragon. Please tell me easy procedure.
Thanks in advance.
Click to expand...
Click to collapse
https://drive.google.com/uc?id=0B9GVPtVxpn-tOHNHc3lWWFRFekE&export=download
download above zip. and download eui 5.8.019s from official page(full rom)
then extract the recovery.img from above linked zip and flash that recovery...
now you can easily flash your stock rom from this recovery.
i did same.
saurabh1234 said:
download above zip. and download eui 5.8.019s from official page(full rom)
then extract the recovery.img from above linked zip and flash that recovery...
now you can easily flash your stock rom from this recovery.
i did same.
Click to expand...
Click to collapse
I have downloaded this file "S2_X526-OS-OP-IIXOSOP5801910121S-5.8.019S.zip" of about 1.8 GB. Can you please check and tell if this is right file?
And I can flash file as it is or I have to rename it like "Update.zip"?
Successfully reverted back to stock ROM.
Just one question, Should I relock bootloader or it won't affect anything?
fadingstar said:
Successfully reverted back to stock ROM.
Just one question, Should I relock bootloader or it won't affect anything?
Click to expand...
Click to collapse
it will not affect anything
I need to give my phone to the service center. If I return to stock, and relock the bootloader, will they be able to tell that I'd installed a custom ROM?
[email protected] said:
I need to give my phone to the service center. If I return to stock, and relock the bootloader, will they be able to tell that I'd installed a custom ROM?
Click to expand...
Click to collapse
no they will not...they only need stock rom and recovery in device
Could someone who's gone back to stock clarify the instructions?
From what I've gathered we need place the stock ROM on the SD card,(but do we rename it first?) and then flash the stock recovery via fastboot, but I'm kind of lost on what happens next.
fadingstar said:
Successfully reverted back to stock ROM.
Just one question, Should I relock bootloader or it won't affect anything?
Click to expand...
Click to collapse
Bro tell me how did you do that?
[email protected] said:
Could someone who's gone back to stock clarify the instructions?
From what I've gathered we need place the stock ROM on the SD card,(but do we rename it first?) and then flash the stock recovery via fastboot, but I'm kind of lost on what happens next.
Click to expand...
Click to collapse
Rename it as update.zip and save on root folder. Boot into recovery and install the zip as an update.
---------- Post added at 04:09 PM ---------- Previous post was at 03:38 PM ----------
Jaimin25993 said:
Bro tell me how did you do that?
Click to expand...
Click to collapse
First flash twrp recovery by Ycjeson. Download the stock 19s zip file. Flash the the zip file via twrp recovery. You will be reverted back to stock recovery and stock ROM .
Can anyone please upload stock rom on drive or mega. I guess LeEco has discontinued the website in India.
PowerAP said:
Can anyone please upload stock rom on drive or mega. I guess LeEco has discontinued the website in India.
Click to expand...
Click to collapse
It doesn't exist. I've searched and searched, there is no stock 19s ROM available for download. I know, it's kinda ridiculous
emkorial said:
It doesn't exist. I've searched and searched, there is no stock 19s ROM available for download. I know, it's kinda ridiculous
Click to expand...
Click to collapse
i have this version X520_BB72_ML_BASED_INDIA_19S_r3 ?
Any one please upload 5.8.019s version in Google drive or maga drive and share links
---------- Post added at 05:57 PM ---------- Previous post was at 05:53 PM ----------
fadingstar said:
I have downloaded this file "S2_X526-OS-OP-IIXOSOP5801910121S-5.8.019S.zip" of about 1.8 GB. Can you please check and tell if this is right file?
And I can flash file as it is or I have to rename it like "Update.zip"?
Click to expand...
Click to collapse
Please upload your stock room in Google drive or maga drive anand share us links
PowerAP said:
Can anyone please upload stock rom on drive or mega. I guess LeEco has discontinued the website in India.
Click to expand...
Click to collapse
bok27 said:
i have this version X520_BB72_ML_BASED_INDIA_19S_r3 ?
Click to expand...
Click to collapse
prakashwaran said:
Any one please upload 5.8.019s version in Google drive or maga drive and share links
---------- Post added at 05:57 PM ---------- Previous post was at 05:53 PM ----------
Please upload your stock room in Google drive or maga drive anand share us links
Click to expand...
Click to collapse
Hi guys I have uploaded stock (stable) Le 2 rom. If you want you can download from this link.
S2_X526-OS-OP-IIXOSOP5801910121S-5.8.019S.zip :
https://www.androidfilehost.com/?fid=962187416754464899
S2_X526-OS-OP-IIXOSOP5801910121S-5.8.019S.zip
Rk585 said:
Rename it as update.zip and save on root folder. Boot into recovery and install the zip as an update.
---------- Post added at 04:09 PM ---------- Previous post was at 03:38 PM ----------
First flash twrp recovery by Ycjeson. Download the stock 19s zip file. Flash the the zip file via twrp recovery. You will be reverted back to stock recovery and stock ROM .
Click to expand...
Click to collapse
please provide the link of recovery
Recently that chinese recovery won't start after flashing ,but others work fine do u know why
Battery Life
After installing stock rom with stock recovery and unrooting my phone,i am getting very bad sot .. very less comparing when i had not installed any custom rom. Any help ??? i ve locked bootloader too but that not helps in exceeding battery life
I have installed pixel experience in my LeEco le 2 x526 using twrp. But I want to return to EUI stock rom. I tried installing it using twrp but after the installation completes and reboots it is stuck on LeEco logo. Are you sure installing it with your method will work?
Give me which steps working for u?
Give the step please
I also want to go back to stock after useing lineage os
fadingstar said:
Successfully reverted back to stock ROM.
Just one question, Should I relock bootloader or it won't affect anything?
Click to expand...
Click to collapse
---------- Post added at 09:20 AM ---------- Previous post was at 09:18 AM ----------
Friend this link is deleted from drive please give new link
saurabh1234 said:
https://drive.google.com/uc?id=0B9GVPtVxpn-tOHNHc3lWWFRFekE&export=download
download above zip. and download eui 5.8.019s from official page(full rom)
then extract the recovery.img from above linked zip and flash that recovery...
now you can easily flash your stock rom from this recovery.
i did same.
Click to expand...
Click to collapse