My Tab is stuck at GalaxyTab Samsung" boot screen after i try to flash Roto-JMI-v2, before i was running Overcome v1.1.2 rom and [Kernel] [EURO] [1.4ghz OC/UV] MCR EXT4 v12 and it work like a charm. But becurse i deside to sell my TAB i flash back to Roto JMI.
I flash with Odin 1.7 with success, but now it stuck at boot logo.
After that I try many other ROM and flash with Heimdal but no lock.
I have no problem to get download mode, and flash with odin and Heimdal. But I can't get into recovery mode (power+vol up)
I have try almost every solution in the Forum...
What to do next...??
Have you tried flashing kernel only? like the overcome kernel v1.0?
Perhaps that will get you ClockWorkMod Recovery back...and you can go from there.
I try it now, shall i use odin or Helmdall to flash kernel only
With overcome kernel v1.0 it fail in Odin
That's odd. Odin should flash the kernel fine.
Does it give an error? or it just says successful, but you still cannot get into CWM?
It give a error, and I still cannot get into CWM, shall i use a pit to flash
And I have try this....
1.Get a stock rom package (any of Rotohammer's firmwares will work)
2.Get P1_add_hidden.zip attached to this post and extract the P1_add_hidden.pit file
3.Using Odin 1.7, put stock rom (Roto-JME-Full-v4.tar for example) in PDA slot.
4.Put P1_add_hidden.pit in Pit slot
5.Check repartition box
6.Put Tab in download mode by holding Volume Down and Power, connect to the computer, and press start.
7.After this, the Tab will reboot normally. Shut it down and return to download mode.
8.Open Odin 1.7 and reconnect the Tab.
9.In the PDA slot, choose the Overcome Kernel v2.0 tar file for use with Odin. Press start
10.It will flash the kernel then reboot. Upon reboot, you should hear the sexy robot voices informing you of the status of the EXT4 conversion.
11.Once done, the Tab will boot normally. At this point you can load Overcome v1.2.2 rom (or any other Rom of your choosing)
12.NOTE - Overcome 1.2.2 includes v2.0 of the kernel, so no reflashing is required after install.
Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge. Can i only upgrade to kernel 2 when i have a JM* (Rotohammer rom?)
This is very weerd, other with some god solution
NN1123 said:
This is very weerd, other with some god solution
Click to expand...
Click to collapse
You are correct - he needs to repartition the sd card, using the .pit file because it was formatted to ext4.
Your steps are great! I do them one at a time with a reboot between each one.
sreins said:
Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge.
Click to expand...
Click to collapse
Oops - if you got your rom from samsung you have a locked bootloader. You can continue to flash those updates, or you can use a patch to remove the lock, then you can continue on.
Can someone please paste the link to the patch?
how about the Verizon gtab...
same thing is happening to me on the galaxy tab from verizon... samsung says to send it.. but i dont want to wait two weeks without my tab... thanks..
Stuck in Bootup Screen
I also have same problem,
I flashed a Rom from "samfirmware" and after it finished it stuck on bootup screen, unable to do recovery mode.
only goes to bootup screen or Dawnload .
can you guys help ?
You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.
Stuck in Bootup Screen
thanks
but I can not get the tab to load in order to run any app. it is stuck in boot screen. any suggestion ?
You cannot get into download mode? That is power + volume down.
Do you know of the adb program?
stuck on bootup screen
I havent used ADB before.
any other solution?
rangercaptain said:
You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.
Click to expand...
Click to collapse
how install apk boot pacth phone only samsung logo or only enter download mode how install boot patch ?
newbie comes here to learn how to flash kernel.
Sirs, i'm in a tragic situation. Pls help...
I rooted my galaxy mini pop plus (s5570i with gingerbread 2.3.6) and installed clockworkmod and i successfully did complete nandroid backup. Later unknowingly i installed rzRecovery. After that my phone does not boot. It stucks at samsung android logo. I am able to enter into cwm but when i try restore my backup it says error mounting /system. Is my phone bricked? Is there any solution? Kindly help
note:
1. Odin4.3 does not detect my phone,BUT odin3 does
2. The cwm i used is not permanant. when i press vol.up+home+power it always go to stock recovery. then i have to update the file samsung_pop_plus_cwm.zip
Try to flash cwm through odin and not through recovery. I think it could be a problem if stock recovery tries to replace itself with another recovery.img WHILE ALREADY USING THIS FILE
Masrepus said:
Try to flash cwm through odin and not through recovery. I think it could be a problem if stock recovery tries to replace itself with another recovery.img WHILE ALREADY USING THIS FILE
Click to expand...
Click to collapse
if i try with odin it shows FAIL; another version stucks at 'Nand writing started'. Another thing when i enter into download mode there is a heading 'ODIN MODE' in red color at the top of the window. And the logo is a green android shape. is it normal??? is it the default state???
First mistake you do, is flashing a recovery that doesn't work for you device.
Second mistake is you don't read instruction really well.
So, send it to SSC (Samsung Service Center), don't act suspicious or they'll know you root your phone.
I have an problem,my note III wont boot,it goes straight to the stock recovery.This happened after I reinstalled safetrap,but I didn't uninstall first before installing new one,so I'm guessing thats what I did wrong?after I installed,I pressed on reboot to recovery and now i'm stuck.I restarted the phone a thousand times but it keeps going straight to recovery after the note III logo screen.The Rom it was running is Alliance 9.1 Lollipop. What should I do?Please help,and sorry for my english.
Power off your device then hold the power button, volume down button and your home button all at the same time until you enter download mode. Once in download hit volume up one time the using your USB Cable
You can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613 and N900AUCUCNC2 ODIN Files http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, not the All-In-One when coming from Lollipop.
NEW To ODIN and n900a HELP
GoldieSlayer said:
Power off your device then hold the power button, volume down button and your home button all at the same time until you enter download mode. Once in download hit volume up one time the using your USB Cable
You can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613 and N900AUCUCNC2 ODIN Files http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, not the All-In-One when coming from Lollipop.
Click to expand...
Click to collapse
I am running Alliance 9.1 rom and I was searching for my Safestrap recovery. I didn't find it and so I tried busybox "reboot into recovery" script. Doing that made my phone go crazy "go to att and let the service tech" look at it. I can't boot into recovery as it gives me this error and I have to use ODIN to flash the BL file. Now I can't get into my phone because of a Pin. I think that the script from busy box is still running and if I can get passed my pin, I want to see if I can disable the script. My main issue is, can I use the aforementioned process to just start over? I was told I cannot use ODIN to flash to stock rom. I have already found out that I have tripped my knox counter. PLEASE HELP. THIS IS MY ONLY PHONE AND MY WIFE IS GOING TO KILL ME.
Thank you for your help.
So I was on the road to installing the Marshmallow Dr. Ketan ROM for Jio VOLTE.
The problem occurred because I mistakenly selected something into the 'BL' section of ODIN instead of the 'AP' section.
Ever since then I haven't been able to neither boot into the phone nor get into recovery.
What should be my next step for getting the phone to work again?
All I can do is get into download mode and restart the phone. I can't seem to catch the phone in the middle of the restart to boot into recovery for some reason. I even re installed the TWRP recovery (AP in odin) it installed fine, but I just can't seem to get into recovery.
Any and all help much appreciated!
Find and download bootloader and flash it through Odin. Then reflash recovery. That should do the trick, (make sure u download the right bootloader! Or you might hardbrick you're fone!)
I am the verizon s7 edge sm-g935v . I have download all the tools needed, superuser, odin and the root file.. This is where the problem happens i try to use odin to install the root file only its a zip file and odin only works with tar. Everyone keeps teeling to just use the custom recovery like twrp but that is not on the phone, correct me if i am wrong the phone needs to be rooted before you can have custom recoveries on them? Please someone provide me with a link of step by step instructions to root my phone. PS using one of the methods i have some how erased the factory reset ability from the phone. Right now there is no recovery. The phone is still working I just can't reset it at all. Goes into a boot lock screen if I do.