Database Develop

[Q] Help Needed! Two strange isseus after iHakers 1.1 install!

Hi!
Just flashed iHackers V1.1-CR last night by following 100% the tutorial:
CR-Link: http://forum.xda-developers.com/showthread.php?t=2539008
HowTo:
Install Oficial FTF for Firmware 14.1.G.1.534.
Root Your Phone Using VRoot or KingoApp Root.
Backup TA Partition.
Copy the ROM to External SDCard.
Install Dual Recovery for LB.
Reboot into Recovery.
Make Sure to do a Wipe Data/Factory Reset before Installing the ROM.
Start the Installation. (Install Zip >> Choose Zip for External SDCard).
Switch Off Your Phone (Do Not Reboot). Select No to Disable Flash Recovery Confirmation.
Install Kernel.ftf .257 C6903 or Kernel.ftf .257 C6902 with Flashtool
Reboot and Enjoy.
I did as following:
- installed ADB-drivers
- installed Kingo-Root
- installed Flashtool-drivers
- installed Flashtool
- unpacked Dual-CWM-files
- unpacked TA-Backup
- unbox Z1
- boot
- check firmware (was something about 51x or so)
- downloaded firmware 534
- started Z1 within Flashmode
- connected Z1 with USB-cable to PC
- pressed 'volume -* + green LED blinked
- started installed 'Flashtool'
- pressed the 'Flash'
- picked 'Flashmode'
- picket 534-firmwarefile
- flashed
- unplugged cable
- reboot
- set up google-account
- DID not made OTA-Update
- stopped Auto-App-restore from Google Play
- went to XPERIA-conectivity-options
- PC-Compagnion-install disabled
- picked correct USB-connection-modus
- ticket allow unknown source-install
- ticket USB-debugging within developer-menu
- started Kingo
- plugged Z1 with USB-cable
- waited till driver/stuff was synched
- 'Root'-option was able to be clicked
- clicked
- 'Root succeeded' appears
- did an TA-Backup and ticked SuperSu-request while backing up
- put iHackers V1.1 onto external SD-card
- went to 'Dual-CWM'-folder and double-clicked 'Run.bat'
- CWM-window appeared
- clicked 1 (= SuperSU)
- once done, Z1 rebooted into recovery
- rebooted into recovery once again
- did complete Nandroid-backup
- did Wipe Data, factory Reset + Davlik
- installed ROM by using my options I would have to be installed
- installed 257-Kernel with Flashtool -> Flashmode -> pickde Kernelfile -> flashed
- Reboot
- installed ALL needed apps
- did ALL settings I would like to use
ISSUES:
1) Dual-CWM:
- has gone -> tried to re-install -> failed -> 'Waiting for Device' for a long time without any progress
2) Camera:
- while ticking 'camera' it shows message: 'Sorry but camera was shut down' -> OK
HOW TO GET DUAL-CWM BACK?
HOW TO GET CAMERA BACK TO NORMAL?
Once those two issues are solved, HOW TO GET NEW iHACKERS V1.2 INSTALLED WITHOUT GETTING THOSE TWO ISSUES AGAIN?
Thanks a lot,
DES75

Did you unlock your bootloader? that can explain the camera issue. btw you should post of the IHackers Thread not create your own thread in general section

1) downgrade and try again, this time flash the .zip for dual recovery AFTER flashing the rom and BEFORE rebooting (EDIT before trying that, make sure you have granted ADB shell root access in superuser app)
2) Clear data in settings/app/camera common

Morlock O said:
Did you unlock your bootloader? that can explain the camera issue. btw you should post of the IHackers Thread not create your own thread in general section
Click to expand...
Click to collapse
Hi!
I did all written stuff! I didn't unlock BL at all! Within all those stuff, nothing appeared to open BL!
OR
Is there an option within FLASHTOOL which will open BL while flashing Firmware and/or 257-Kernel?
BTW:
I'm not allowed to post within iHackers-thread!
Thx + BR,
DES75

DESASTER75 said:
Is there an option within FLASHTOOL which will open BL while flashing Firmware and/or 257-Kernel?
Click to expand...
Click to collapse
If you do not know the answer to that I would you suggest you stay away from unlocking the bootloader until you have learned a few basics

gregbradley said:
If you do not know the answer to that I would you suggest you stay away from unlocking the bootloader until you have learned a few basics
Click to expand...
Click to collapse
Hi!
How to do downgrade!
thx

DESASTER75 said:
Hi!
How to do downgrade!
thx
Click to expand...
Click to collapse
Flash a 534 FW in flashtool, you did it before on your list

gregbradley said:
Flash a 534 FW in flashtool, you did it before on your list
Click to expand...
Click to collapse
534 flah
something to umcheck within flashtool
after flash, how to proceed to het Ihackers installed

DESASTER75 said:
534 flah
something to umcheck within flashtool
after flash, how to proceed to het Ihackers installed
Click to expand...
Click to collapse
Like this
DESASTER75 said:
Hi!
- started Z1 within Flashmode
- connected Z1 with USB-cable to PC
- pressed 'volume -* + green LED blinked
- started installed 'Flashtool'
- pressed the 'Flash'
- picked 'Flashmode'
- picket 534-firmwarefile
- flashed
- unplugged cable
- reboot
- set up google-account
- DID not made OTA-Update
- stopped Auto-App-restore from Google Play
- went to XPERIA-conectivity-options
- PC-Compagnion-install disabled
- picked correct USB-connection-modus
- ticket allow unknown source-install
- ticket USB-debugging within developer-menu
- started Kingo
- plugged Z1 with USB-cable
- waited till driver/stuff was synched
- 'Root'-option was able to be clicked
- clicked
- 'Root succeeded' appears
- did an TA-Backup and ticked SuperSu-request while backing up
- put iHackers V1.1 onto external SD-card
- went to 'Dual-CWM'-folder and double-clicked 'Run.bat'
- CWM-window appeared
- clicked 1 (= SuperSU)
- once done, Z1 rebooted into recovery
- rebooted into recovery once again
- did complete Nandroid-backup
- did Wipe Data, factory Reset + Davlik
- installed ROM by using my options I would have to be installed
Before rebooting and after flashing the rom flash this Z1-lockeddualrecovery2.7.43-BETA.zip (7.58MB) from here
- installed 257-Kernel with Flashtool -> Flashmode -> pickde Kernelfile -> flashed
- Reboot
- installed ALL needed apps
Click to expand...
Click to collapse

gregbradley said:
Like this
Click to expand...
Click to collapse
Hi!
So just do the whole procedure (beginning from first line) once again? It's not the prob, just want to be 100% safe!
And after that, you think that ...
- Dual-CWM will be installed
- Camera-issue will have been gone
- iHackers V1.2 will be installed
Thx

DESASTER75 said:
Hi!
So just do the whole procedure (beginning from first line) once again? It's not the prob, just want to be 100% safe!
And after that, you think that ...
- Dual-CWM will be installed
- Camera-issue will have been gone
- iHackers V1.2 will be installed
Thx
Click to expand...
Click to collapse
There is no need to do it all again, but the issue will be gone if you flash that file when I say and if you clear data in settings/app/camera common

gregbradley said:
There is no need to do it all again, but the issue will be gone if you flash that file when I say and if you clear data in settings/app/camera common
Click to expand...
Click to collapse
Hi!
1) So I should use Flashtool to get this *.zip flashed onto Z1 NOW or should it be flashed onto Z1?
2) Already cleaded data from 'camera common' but still same camera-prob
Thanks for your great support

1) Use flashtool to flash 534
2) Root it
3) Let it update OTA
4) Install DualRecovery from here
5) Enter Recovery, factory reset, clear cache, clear dalvik.
6) Follow the installation guide to install the rom of your choice. The only thing to do differently is AFTER flashing the rom.zip and BEFORE rebooting flash the .zip file I mentioned in the earlier post.
6) Reboot
7) Done

gregbradley said:
1) Use flashtool to flash 534
2) Root it
3) Let it update OTA
4) Install DualRecovery from here
5) Enter Recovery, factory reset, clear cache, clear dalvik.
6) Follow the installation guide to install the rom of your choice. The only thing to do differently is AFTER flashing the rom.zip and BEFORE rebooting flash the .zip file I mentioned in the earlier post.
6) Reboot
7) Done
Click to expand...
Click to collapse
Hi!
Sorry, I'm really a bit nooby and just want to be 100% safe!
1) Use flashtool to flash 534 (connect Z1 with PC, start flashtool, flash, Flashmode, pick 534-firmware, flash)
1-2) reboot
2) Root it (Kindo)
2-1) reboot
3) Let it update OTA (just download OTA + install)
4) Install DualRecovery (file name: ZU-lockeddualrecovery2.7.42-BETA.windows.zip) - (unpack on PC, double-click *.bat, install by using 'supersu')
4-1) reboot and hold 'Volume +'
5) Enter Recovery, factory reset, clear cache, clear dalvik.
5-1) iHacker 1.2 on external card
5-2) install zip from ... + follow instructions
6) Follow the installation guide to install the rom of your choice.
6-1) NO REBOOT
6-2) stay in recovery and install zip from external card and flash the 'Z1-lockeddualrecovery2.7.42-BETA.zip''
6) Reboot
7) Done
That's it?
Please finally confirm,
DES75

yes

gregbradley said:
yes
Click to expand...
Click to collapse
you are probably the most patient person on a forum I ever met.

jontr said:
you are probably the most patient person on a forum I ever met.
Click to expand...
Click to collapse
I have my moments
Sent from my C6903 using XDA Premium 4 mobile app

Hello!
I did like following but got problem (marked in red)! Do someone know how to get that fixed?
1) Use flashtool to flash 534 (connect Z1 with PC, start flashtool, flash, Flashmode, pick 534-firmware, flash)
1-2) reboot
2) Root it (Kindo)
2-1) reboot
3) Let it update OTA (just download OTA + install)
4) Install DualRecovery (file name: ZU-lockeddualrecovery2.7.42-BETA.windows.zip) - (unpack on PC, double-click *.bat, install by using 'supersu')
4-1) reboot and hold 'Volume +'
5) Enter Recovery, factory reset, clear cache, clear dalvik.
RECOVERY IS NOT ABLE TO LOCATE/GET FILE FROM EXTERNAL SD!!! ALL FILES ARE ON EXTERNAL SD BUT RECOVERY SHOWS EXTERNAL SD WITH 0BYTES!!! SO HOW TO GET MY EXTERNAL SD WORKING WELL???
BTW (before someone is asking):
The external SD already checked on PC and on PC, on an EEEPC and on an other smartphone, that SD is working well!
would like to proceed the following steps, too:
5-1) iHacker 1.2 on external card
5-2) install zip from ... + follow instructions
6) Follow the installation guide to install the rom of your choice.
6-1) NO REBOOT
6-2) stay in recovery and install zip from external card and flash the 'Z1-lockeddualrecovery2.7.42-BETA.zip''
6) Reboot
7) Done
Thanks a lot for your kind support and have a nice weekend,
DES75

Just put the required file on the internal sdcard...

gregbradley said:
Just put the required file on the internal sdcard...
Click to expand...
Click to collapse
Hi!
That's not working, too!
Anyone an other idea?
Thx,
DES75

Xiaomi Note (WCDMA) All in One Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thread Closed
Specifications:
Xiaomi Redmi Note Enhanced Version MTK6592 1.7GHz Octa Core 2G Ram 8G Rom 5.5 Inch.
- MTK6592 Octa Core 1.7GHz
- 5.5 inch 1280 * 720 HD IPS OGS Screen
- 2G RAM + 8G ROM
- MIUI V5 Android 4.2 Smartphone
- 13.0MP Rear Camera + 5.0MP Front Camera
- Support 3G, GPS, WIFI, Bluetooth 4.0 LTE, Play Store, OTG, Wifi Direct, etc
THREAD ClOSED !!!
Tested With Windows 7
1. Restore Miui V5 Rom With SP Flash Tool v5 And Fix IMEI And Backup and Restore IMEI
2. Root
3. CWM Recovery And TWRP Recovery
4. WSM Manager
5. XExtStorage
6. Update Rom
7. MT GPS EPO Fix
8. Multi Lang Custom Rom And Xposed
9. Full Backup And Restore Rom With TWRP Recovery And MTK Tools
10. Backup and Restore Apps + data
11. How to Fix sms Sent error
12. Odex Tool
13. Extra
Thread Updated 20/05/2015/23:25
---
I am not responsible for any damage on your phone !
---
Code:
1. Restore Miui v5 Rom With SP Flash Tool v5 350Mb
Thanks to mtmwielgosz
Thread : http://miuipolska.pl/forum/topic/2581-flash-tool-odceglij-swoją-komórkę/
Download: USB VCOM Driver MT6589.zip unzip and install driver
Download: SP Flash Tool v5.1352.01 + Redmi Note rom.rar
Unrar and Run as Administrator the flash_tool.exe file
Select Scatter-Loading and Navigate to the MT6592_Android_scatter.txt in the same folder Select Download
Remove Battery,SdCard From phone and connect to pc you will see a red bar to appear.
Flash procedure will start and let it finish.
After Downloading OK Disconnect phone from pc and place your battery and Reboot
Driver MT6589.zip Link: https://drive.google.com/folderview?id=0B0txCS7uoGPoLTN5WDh0Tklnazg&usp=sharing
Miui V5 Rom With SP Flash Tool Link: https://docs.google.com/file/d/0Byw1bz3UxGznaTYyQzB1b0VKSXc/edit
Note - If you stuck at 100% red bar and nothing happens have a DRam Error Or Formatted Phone Use this MT6592_Android_scatter.txt
Open Flash tool and Navigate to the unzipped Downloaded restore usine 23.0 Folder/ MT6592_Android_scatter.txt
It works with a Fully formatted Xiaomi Note
Rooted Restore Rom Link: https://mega.co.nz/#!hwwlwYwJ!ixRW-XY9IFNVRFC-XGOr3A_Ku5MUeS17ncQRxdKvOzA
also Look Step 9 Flash Custom Rom from Backup with MTK Tools
1. Fix your IMEI (The Easiest Way) on Android 4.2.2
First find your IMEI code on inside of your Xiaomi Note or your Box
Root Your Phone And Install and open The MTK Tools From
Select MTK Settings
Select Connectivity
Select CDS Information
Select Radio Information
Watch the video for instruction.
Tool: https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter
Video: https://www.youtube.com/watch?v=3uFpVU9xdF0&app=desktop
Reboot Phone
To Check IMEI on your phone enter this Code *#06#
Writing random or other people's IMEI and MAC addresses is illegal !
2. Fix your IMEI on KitKat 4.4.2 And 4.4.4/5.1.0
METHOD (3) with MTK DROID TOOLS
USB debugging must be activated !
Thread Link: http://sheershbansl.blogspot.be/2014/08/how-to-fix-invalid-imei-3-methods.html?m=1
Driver Auto Installer Link:
https://www.mediafire.com/?os7qwu8n9e19c33
MTK Droid Tool Link:
https://www.mediafire.com/?fp3gpchvs9ymiai
---
1. Backup IMEI
Android 4.2.2
Android 4.4.2
Install Moileuncle MTK Tool
Select IMEI Backup Restore (MTK)
Select Backup IMEI to SDCARD2(MTK)
Location - SDCARD/IMEI.bak
Backup with Android 4.4.2/4.4.4
Connect phone (USB debugging) with Open MTKTools
Click Root click IMEI then Backup
2. Restore IMEI
Copy the IMEI.bak to SDCARD
Select IMEI Backup Restore (MTK)
Select Restore IMEI to SDCARD2(MTK)
Select Ok
Reboot Phone Ok
Link: https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox
Backup with Android 4.4.2/4.4.4/5.0.1/5.0.2
Connect phone (USB debugging) with Open MTKTools
Click Root Click IMEI then restore
If Not Working Restore IMEI backup 2x Times reboot
---
Remove (NVRAM WARNING) in Wifi Box The (Easiest Way)
Thanks to Nilendu
1. Download and unrar 2 files on Sdcard
2. Go with Root Explorer Pro to root/data/nvram/APCFG/APRDEB Folder
3. delete WIFI and WIFI_CUSTOM
4. Copy from sdcard The unrar WIFI and WIFI_CUSTOM to the APRDEB folder
5. Reboot Phone
Thread: http://forum.xda-developers.com/showthread.php?t=2730486
Root Explorer Pro : https://play.google.com/store/apps/details?id=com.speedsoftware.rootexplorer
Wifi files: http://forum.xda-developers.com/attachment.php?attachmentid=2707382&d=1398400409
Note Make a Backup with zip-me app (Flash.zip)
link: https://play.google.com/store/apps/details?id=zip.me
---
2. Root
Thanks to MIUI.COM
1. Download Root.zip to sdcard
2. Open Miui-update app select the Root.zip and install
Root Link: http://www.mediafire.com/download/1ta2q0gubucxklq/miui_redminote_rootonly_rel.zip
Set Root Premission in miui Security app
---
1. Root & UnRoot Tool *** (Supersu)
USB debugging must be activated !
Link: http://www.kingoapp.com
SuperSU 1.86 (free) Pro Option Update Zip - Flash in Recovery
Picture: https://mega.co.nz/#F!lNUGTZLS!N_HabTs1wakjsjs4RgmzWA
Link: http://download.chainfire.eu/372/SuperSU/
2. RootGenius Tool **** (Kinguser)
USB debugging must be activated !
Link: http://www.mediafire.com/download/qislbf068ey2tyw/RootGenius_1.8.7.exe
Annoying Update Binary Supersu ?
1. install Kinguser
Open Kinguser enable Root
2. Uninstall Superuser with Root Uninstaller
Link: https://play.google.com/store/apps/details?id=com.rootuninstaller.pro&hl=nl
---
3. CWM Recovery And TWRP Recovery
Thread Thanks to Dayhlirium
Original Thread Thanks to MIUI.COM
Download and install Mobileuncle MTK Tools
Download Recovery.img and put the file on sdcard
Open Mobileuncle MTK Tools app and select Recovery Update and
On top Select the CWM OR TWRP Recovery.img
use Recovery file ? OK
Reboot into Recovery mode ? OK
Reboot System now
Mobileuncle MTK Tools link: https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox
Rashr Tool:
Select Kernel Recovery
Select other from storage
navigate to Recovery.img
Select Yes gladly
Select Yes gladly
Link: https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools&hl=nl
Recovery.img
Thread: http://forum.frandroid.com/topic/196699-redmi-note-pro-wcdma-installez-un-custom-recovery/
Thread CWM 5.5.0.4.img( Non Touch ) : https://mega.co.nz/#!cB5H1IRB!6ry4KxvPDG4q6KpmRCDYKjU8fQH2NbeH4Oqxc96Exew
TWRP 2.7.0.0.img: https://mega.co.nz/#!9FJxybbJ!_K7U5LlFGpupN1B-Q5IFF9QV5x-G7oEJz37ztJRCf10
TWRP 2.8.1.0.img -Mount in TWRP Not Working/copy large files is not possible and .. http://www.mediafire.com/download/pk1155pj1uv2kqi/recovery.img
TWRP 2.8.5 Flash zip: http://en.miui.com/thread-59937-1-1.html
Themes: http://en.miui.com/thread-59937-1-1.html
Flash Recovery.img With MTK Tools
Tested on Huawei honnor 3 Rom
1. Enable USB Debugging
2. Connect Phone
3. select Use boot from Phone
4. Click Recovery & Boot
5. Auto CWM NO !
Select and Flash Recovery.img
Select Reboot in Recovery
---
4. WSM Manager
For Reboot options,Paid Therme,Mi-Tools and....
Download WSM Manager and select install Framework
Select OK
CAREFUL DO NOT SELECT REBOOT select Cancel ! (Otherwise your phone is stuck on boot logo)
Open Root explorer Pro and navigate to System/Framework folder and delete all the .jex files !!
Then Reboot phone
WSM Manager Link: http://www.mediafire.com/download/4m0cpdsq5fg2q70/pro.burgerz.wsm.manager_v234_de90d0.apk
Root Explorer Pro Link: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer
---
5. XExtStorage
Replace internal memory by SDCard
Install XextStorage
Open XExtStorage and set
Primary SDCard1
Secondary SDCard0
Enable XExtStorage in WSM manager
Copy Android Folder from internal storage to SDCard !
Reboot Phone.
Link: http://www.mediafire.com/download/jlj4c48t1c4c2ay/XExtStorage.apk
6. Update Rom
No Root or CWM,TWRP Recovery required !
Stable Miui V5 Multi Lang 28.0.0 JDQ39 Rom 440Mb ***
install Rom with update app
After installation, you get (E:Invalid command argument) ignore !
Select and confirm with volume and power button the upper strip and phone will reboot
Link: http://media.celogeek.com/roms/andr..._multi_lcsh92_wet_jb9_WCDMA_28.0.0_jb-4.2.zip
backup Rom recommended before updating
To open Backup app go to Settings/System/Backup & reset
Reinstall Root.zip
Restore Backup
---
Stable Ota Miui V5 Multi Lang 29.0.0 JDQ39 Rom 441Mb **
No Root or CWM,TWRP Recovery required !
install with update app
Link : https://www.mediafire.com/?x684ncvm0dfhras
backup Rom recommended before updating
To open Backup app go to Settings/System/Backup & rese
Reinstall Root.zip
Restore Backup
For the last Rom check update app
---
7. MT GPS EPO Fix
Thanks to MIUI.COM
Download and install MT GPS Fix
Select Download EPO files
Select Settings/Locations Enable everything Wifi on
Reboot Phone
Original Tread: http://en.miui.com/thread-27491-1-1.html
Link: https://play.google.com/store/apps/details?id=com.chxdev.mtgps
---
8. Custom Rom 4.2.2 /4.4.2/5.0.2
Download Rom
In TWRP Recovery
Wipe cache/dalvik cache/data
Install Rom from Sdcard
If it is indicated swipe for install Root
Reboot Phone
---
Moviles Dualsim
Account=Download
Link: http://www.movilesdualsim.com/foros/roms-xiaomi-redmi-note.504/?prefix_id=14
Roms are Multi Lang and have Root access !
https://mega.co.nz/#F!hRlRDArB!z3DisJtQP6xQLwyq2go3sA
---
Android L 5.0.2 Rom (Based 4.4.2) ****
Info: http://www.needrom.com/download/android-l-4/
Link: http://pan.baidu.com/s/1o6tBwim
----
Miui.com (WCDMA)
Link: http://en.miui.com/thread-26132-1-1.html
---
Xposed Installer
Install Xposed Installer
And you can install Modules to Customize your phone
CAREFUL DO NOT SELECT REBOOT select Cancel ! (Otherwise your phone is stuck on boot logo)
Open Root explorer Pro and navigate to System/Framework folder and delete all the .jex files !!
Link: http://repo.xposed.info/module/de.robv.android.xposed.installer
Modules (Tweaks) that you may need
-Xposed Additions Wake Device USB Connection and..
http://repo.xposed.info/module/com.spazedog.xposed.additionsgb
-Gravitybox customize phone: Physical Go to sleep button, quickunlock,Ram and Closing all apps,call Vibrations
,Torch and much More settings
http://dl.xposed.info/modules/com.ceco.gm2.gravitybox_v111_70a4b6.apk
-NoSafeVolumeWarning No Warning Volume
http://dl.xposed.info/modules/com.pyler.nosafevolumewarning_v6_485a40_0.apk
-SMS Xposed Wake on sms and Flash Flashlight
http://dl-xda.xposed.info/modules/com.stephapps.smsxposed_v11_85cb23.apk
-AlternateAppPicker Select Default app
http://dl-xda.xposed.info/modules/pk.qwerty12.alternateapppicker_v3_6c8c0f.apk
-EnhancedToast (Remove Annoying toast Notifications) Select the apps that display no Toast
http://repo.xposed.info/module/de.defim.apk.enhancedtoast
-Xposed GEL Settings (FREE) Google launcher customization and .....
http://dl-xda.xposed.info/modules/de.theknut.xposedgelsettings_v95_08c0a8.apk
-Need Pro Version and also need "Miss it"for Notification Badge
https://play.google.com/store/apps/details?id=net.igecelabs.android.MissedIt&hl=nl_BE
Pictures apps: https://mega.co.nz/#F!Jc0gnKiZ!VD4c8lsvcoIycdIaSDpw5g
-3dot menu Mod Option Menu in apps
http://dl-xda.xposed.info/modules/it.tnx.xposednavbarmod_v1_35454b.apk
-Statusbar Volume Volume in statusbar and Mute Volume button
https://dl.dropboxusercontent.com/s/a5q5boptebou04e/StatusbarVolume1.3.apk?dl=1
-Bringback old Gps Icon For KK jelly Bean Gps Icon on KK
http://dl-xda.xposed.info/modules/eun.xposed.gpsnotification_v10_968e53.apk
-No Lock Home (KK) No unlock Security ad Home Wifi
http://dl-xda.xposed.info/modules/com.smartmadsoft.xposed.nolockhome_v23_2f8040.apk
-JB 4.4.2 : http://forum.xda-developers.com/xposed/modules/mod-lock-home-v0-1-wifi-unlock-t2799087
-AppOps KK app options in settings
http://dl-xda.xposed.info/modules/at.jclehner.appopsxposed_v12503_665c90.apk
-Advanced Power Menu+ (APM+) advanced Power Menu
http://dl-xda.xposed.info/modules/hk.kennethso168.xposed.apmplus_v53_4988b3.apk
Note: If the phone unexpectedly Reboot You should check which module is the cause
Stuck on Bootlogo or Cant Login = Flash Disable Zip in TWRP
http://forum.xda-developers.com/attachment.php?attachmentid=2568891&d=1391958634
---
XthemeEngine
install Xposed
install "XthemeEngine" and activate in Xposed
install therme
Open XthemeEngine and select and apply Therme
Select Soft Reboot
Link: https://drive.google.com/folderview?id=0BzS7S7VIfe-LdFA4NVByMHo4aDg
And
HKThemeManager
Link: http://repo.xposed.info/module/com.haiduongbk.hkthememanager
With this Tool you have a selection menu
Example:
Android L By Paras Theme
Link: https://drive.google.com/file/d/0B5wspZ9xT_gjbW4ycnNJa2pvQTQ/edit
Pictures
Link : https://mega.co.nz/#F!dUUngRIT!ahoeJtvgtMlQBHtdIYdJXQ
---
9. Full Backup Rom
With TWRP-Recovery And CWM-Recovery
Power off
Volume Down + Power Button (Same Time)
Select Volume Down Recovery
Confirm with volume up
With TWRP Recovery
Select Backup
System/ Data/Boot
Swipe to Backup
With CWM Recovery
Select backup and restore with volume down and power button
Select Backup with volume down and power button
TWRP Location Backup: sdcard0/TWRP/BACKUPS/HM_NOTE_1W/............
CWM Location Backup: sdcard1/clockworkmod/backup/..........
Or boot in TWRP Recovery with A Rebooter app
And Select Backup
Swipe to Backup
The easiest way
1. With TWRP Recovery Manager ***
You Need Busybox
Select Classic Backup
Select Make Backup
2.With Rom Manager ****
This Step only once
Instal Rom Manager
Select Recovery Setup
Select Below (TWRP)
Select Device Not Listed Above
Select OK
Then
Select Backup Current ROM
Full Restore Backup in the Same Rom
With TWRP Recovery
Check that the TWRP folder is on your sdcard
Power off
Volume Down + Power Button (Same Time)
Select Volume Down Recovery
Confirm with volume up
In TWRP Recovery
Select Restore
The Backup Folder will be automatically displayed
Select
Swipe to Restore
Backup Restored.
the easiest Way
Install Rom
Install Gapps if Need
In TWRP Recovery Restore System/ Data/Boot
With CWM Recovery
Check that the clockworkmod folder is on your sdcard
Power off
Volume Down + Power Button (Same Time)
Select Volume Down Recovery
Confirm with volume up
In CWM Recovery
Select backup and restore with volume down and power button
Select Restore with volume down and power button
Select with power button
Select with volume down and power button Yes- Restore
Backup Restored.
Select reboot system now with power button
Backup And Restore With MTK Droid Tools
Link: http://ofabo.com/2014/10/06/backup-restore-stock-rom-mediatek-device/
---
10. Backup only apps+data to restore in a different Rom
Helium
select apps (not system apps)
Disable (Small Backup)
select backup
select Save on sdcard
Location Backup Folder sdcard/carbon Folder
Link : http://www33.zippyshare.com/d/12251367/3435/com.koushikdutta.backup-1.1.2.8-APK4Fun.com.apk
Resore only apps+data
Install and open Helium Premium
Select Restore backup
Select apps
Select Restore
Select Restore my data
---
11. How to Fix sms Sent error
install Miui Rom
Go To settings/Advanced settings
sms center number
Enter SMS Provider Number
Sent sms to Your Self (test)
Flash the Rom you Like
---
12. Odex Tool
More Speed,stability,Battery consumption...
Android 4.2.2/4.4.2/4.4.4 Need Busybox !
Thanks to Genova
Create a TWRP backup Fist
Flash ARMEABI v1.8 in Recovery
Enable Root Acces
1.
Important First
odex all framework
Open Terminal and Type
su
Enter
odex
Enter
frame
Enter
1 for Reboot
Enter
Or Reboot Phone manually
Android Will Upgrade
2.
odex all system apps
Open Terminal and Type
su
Enter
odex
Enter
sysapp
Enter
1 for Reboot
Enter
Or Reboot Phone manually
Android Will Upgrade
Note: If you waint also partial Odex priv-app
instead of sysapp type all
and the folder priv-app will also be odexed ( Works ! But Not Always )
Note: Use the Odex Tool v 1.8 on a Clean Install (Rom) ( Avoid Stuck on Bootloop )
Note : Do first Framework ! REVERSED NOT POSSIBLE !!
Tested on 4.2.2 and 4.4.2 with v1.7
Tested 4.4.2/4.4.4/5.1.0 With v1.8
Updated ARMEABI v1.8 link: https://32bb3f88f9e82bd9d61d6f637f43f21ed08689e3.googledrive.com/host/0B2ftBoBlBHTITW9xZ2VDMHpFd2M/
Backup and Restore Odex Files With TWRP Select (Data/System/Boot)
---

Thanks very much for the very detailed thread ... Can i copy the informations to another forum?

you're welcome ! yeah but still adjusted
serge
Sent from my HM NOTE 1W using XDA Premium 4 mobile app

hello friend, did all exposed module that u mention above working in Redmi Note? Did u already test it yourself?

Excellent and very organized post.
:good:

Thank you

Yes tested everything !
Sent from my HM NOTE 1W using XDA Premium 4 mobile app

tkalli said:
Excellent and very organized post.
:good:
Click to expand...
Click to collapse
Thanks !

The SP flash tool link???
Sent from my HM NOTE 1W using XDA Premium 4 mobile app

pang34 said:
The SP flash tool link???
Sent from my HM NOTE 1W using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here you go.
SEE HERE

Hi everyone,when I open the sp flash tools I want wait about 3~4minit,any idea to fix it?
Sent from my HM NOTE 1W using XDA Premium 4 mobile app

thank u man for hard work

you're welcome
Sent from my HM NOTE 1W using XDA Premium 4 mobile app

How to check my driver is installed on my computer?
Sent from my HM NOTE 1W using XDA Premium 4 mobile app

pang34 said:
How to check my driver is installed on my computer?
Sent from my HM NOTE 1W using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If drivers are installed it should recognize the phone.
If not and you are running Windows xp, 7 or 8
SEE HERE

tkalli said:
If drivers are installed it should recognize the phone.
If not and you are running Windows xp, 7 or 8
SEE HERE
Click to expand...
Click to collapse
I have installed the driver but when I connected to computer(windows 7),the computer Did not respond,there is normally?
Sent from my HM NOTE 1W using XDA Premium 4 mobile app

4. WSM Manager
For Reboot options,Paid Therme,Mi-Tools and....
Download WSM Manager and select install Framework
Select OK
CAREFUL DO NOT SELECT REBOOT select Cancel ! (Otherwise your phone is stuck on boot logo)
Open Root explorer Pro and navigate to System/Framework folder and delete all the .jex files !!
Then Reboot phone
WSM Manager Link: http://www.mediafire.com/download/4m...234_de90d0.apk
Root Explorer Pro Link: https://play.google.com/store/apps/d...tware.explorer
unfortunately i don't delete the .jex file thus I'm stuck @ mi logo, is there something I can do?
I don't have any backup yet

Does this work for the 4g version aswell?

Everyone please help me,I don't know how to install Vcom driver,my redmi note bricked already, everyone please help me

pang34 said:
Everyone please help me,I don't know how to install Vcom driver,my redmi note bricked already, everyone please help me
Click to expand...
Click to collapse
There are many guides. Pick the one that seems easiest for you.
SEE HERE
and
HERE
and
HER
Hope one of them works for you.

[Q] How to Jelly Bean to Kitkar on Micromax A250

Dear All,
I am trying to update to kitkat but no luck, searched on net tried following things but no luck:
1) Root
a. tried with frameroot - error #9
b. tried with mt6589_rooter - dont know what happens
Even tried show here:
Micromax Canvas Turbo A250, Stock Rom V1 & V2, CWM Recovery and Rooting method MiUi Rom Planned
Read everything or risk a brick.
Standard disclaimer. Your warranty is now void. Use at your own risk. In other words, it is your choice to use this method; I am not responsible for any damage or problems. (Well this method will definitely work). Don’t do it if you don’t know what is rooting.
First ever rooting method.
Hey Friends…
This is the first ever thread dedicated to Micromax Canvas Turbo A250.
1. Specification: (Thanks to GSMArena)
http://www.gsmarena.com/micromax_canvas_turbo-5805.php
2. Price: 19000/- (I bought it from open market here in Bhopal MP)
3. Real Unboxing and review: (Thanks to Gogi and Youtube)
Actually I was thinking to review this phone by myself but when I found this. I 100% agreed with Gogi. He covered everything that I wanted to share with you friends.
http://www.youtube.com/watch?v=Zzr4TEN7Rvw
4. Stock Rom: (Thanks to NeedRom)
Unbrick your phone. Reset to factory Rom.
http://www.needrom.com/mobile/micromax-a250/
Steps for flashing:
a) You need to download Rom and SP Tool from above link. (Registration required)
// Update Link to Mediafire (Thankx to forever king for doing this)
His Original Thread: http://forum.xda-developers.com/show...php?p=47311042
Drivers-: http://www.mediafire.com/download/hl...rivers_x86.exe
stock firmware-: http://www.mediafire.com/download/de...k+firmware.rar
SP-: http://www.mediafire.com/download/8b...1312.0.139.zip
//
b) Download AND Install MTK Drivers http://www.medIafIre.com/download/nv...rivers_x86.exe Download Here).
c) Reboot your PC.
d) Unrar S9311_MP_IN_MMX_15_flasher_user.rar and unzip SP_Flash_Tool_exe_v3.1312.0.139.zip using any Unrar tool like peazip, 7zip, winrar.
e) You will have two folder S9311_MP_IN_MMX_15_flasher_user and SP_Flash_Tool_exe_v3.1312.0.139.
f) Switch of Your Phone. Make sure you have sufficient battery charged or use laptop to do this.
g) Open Flash_tool.exe from folder SP_Flash_Tool_exe_v3.1312.0.139.
h) Click Scatter-Loading button, choose MT6589_Android_scatter.txt file from folder S9311_MP_IN_MMX_15_flasher_user.
i) Wait file to be added into Flash Tool.
j) Choose Option->USB Model, click USB Model.
k) Choose Option->DA DownLoad All->Speed->High Speed, click High Speed.
l) Click Firmwave download and begin to download.
m) Software start downloading.
n) After few minutes you will see big green circle.
o) Done. Boot your phone.
5. Rooting Method
a) Install frameroot .apk
Place downloaded apk in to internal sd card and install it.
http://forum.xda-developers.com/atta...8&d=1380987775
b) select super su
c) click on Boromir
d) reboot.
e) Its Rooted.
f) Done.
6. CWM Recovery Link: http://www.mediafire.com/?33tcc9j7k3o4wgt
Patched Boot IMG Link: http://www.mediafire.com/download/4j...elaa5/boot.img
How to Flash CWM and Boot,img Mobile Uncle (Play Store App)
1. Place downloaded CWM Recover in to root of your internal storage of phone.
2. Download from play store.
3. Grand Root Permissions to it.
3. Select Update recovery.
4. Select the recovery that is in internal storage.
5. Flash.
6. Reboot.
7. Done Enjoy...
Obviously the recovery and patched boot also can be flashed via SP tool.
7. Modes: (I have not created the following MODs Thankx for the developers who worked for them)
a) http://www.mediafire.com/download/5l...cher_2.0.6.apk Xperia Launcher APK work with even on non rooted Device.
Following MODs must be flashed via CWM Recovery.
b) http://www.mediafire.com/download/dj...iaKeyboard.zip Xperia Keyboard with proper prediction and swipe feature.
c) http://www.mediafire.com/download/ja...ami_Sounds.zip Xperia Honami Sound.
8. Untouched Stock ROM Nandroid backup:- can be restore using CWM Recovery after unzipping the file and placing root of your phone's internal memory. (For Those who dont not want to use SP Tool due to some technical reasons.)
http://www.mediafire.com/download/w8...ockworkmod.zip
9. New updated stock ROM flashable via SP Tool. (Thankx to Manish). Stock ROM V2 : http://www.mediafire.com/download/de...asher_user.rar
10. Stock Boot: http://www.mediafire.com/download/ao...tjaly/boot.img
11. Stock Recovery: http://www.mediafire.com/download/8l...m/recovery.img
Now as I have compiled my own recovery.img then this post will include more MODS and custom roms. Cheers...
Press Thankx if I helped.
Custom Rom
1. MiUi Rom ported by me. (Link will be added soon)
Click to expand...
Click to collapse
But bad luck.
Can you guys please guide me how to update to kitkat? a bit step by step.
I will be very happy.
Regards,
Sandip

Rooting and Unroot Huawei P8 [6.0] [FOR All EMUI4.0.1] all [GRA-Types]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rooting and Unroot Huawei P8 GRA-xxx Marshmallow (Android 6) [All Stock-Firmwares with EMUI4.0.1]​
For newer Firmwares use following Guide: https://forum.xda-developers.com/showpost.php?p=75460388&postcount=323
Note: DONT FLASH SUPERSU OVER EXISTING ROOT - SINCE SUPERSU 2.82 IT IS REQUIRED TO UNROOT YOUR PHONE BEFORE USING NEWER VERSION!
SuperSU-v2.82-SR5-permissive.zip by Tecalote: https://www.androidfilehost.com/?fid=962187416754458671 MD5: b168a88bc815d3fac521ace97402a949
It enables init.d and SELinux Permissive (required for installing several mods like Viper4Android etc...)
NEW TWRP released by @AD2076 : https://eu.dl.twrp.me/grace/twrp-3.1.1-0-grace.img.html
This new method should work on all types of GRA (GRA-L09-TL00-CL00-UL00-UL10-TL10-CL10) for newer Firmwares from 2017 on!
For Unroot you can do it directly from SuperSU App - with restoring the boot.img (SuperSU App ask you, answer with YES) - or alternative you can flash UnSU Script with TWRP:
http://forum.xda-developers.com/showpost.php?p=63615067
If you flash unsu script - you must restore your original unmodified boot.img from TWRP Backup! This make sure you can boot straight to system after Unroot.
If you flash instead boot.img extracted from update.app you cannot boot to system before installing EMUI Recovery and doing Factoryreset.
But it is possible to Root your Phone directly after flashing boot.img to BOOT
Restoring boot.img is required after Unroot in every case! A) If you like to stay unrooted and B) if you want to Root with new Version of SuperSU. If you want Root with new SuperSU, you must restore original boot.img. After you have restored it from TWRP Backup or flashed it with adb in Fastboot Mode, you can Root directly after restoring without boot to system before.
If you cannot restore boot.img, because you have no TWRP Backup from Boot, you can download the Firmware for your build Number (Settings/About Phone) from here:
http://pro-teammt.ru/firmware-database/?firmware_model=GRA&firmware_page=0
With following Tool you can extract boot.img from UPDATE.APP - Huawei Update Extractor: https://forum.xda-developers.com/showthread.php?t=2433454
Unlocked Bootloader required
Unlocked Bootloader:
If your Bootloader is locked install the App Huawei-ID on your Phone. On newer Firmwares, the Huawei-ID App is already preinstalled.
But anyway update it to this version: https://www.androidfilehost.com/?fid=385035244224383206
After you must visit website for login and requesting the unlock-code. Visit: http://emui.huawei.com/en/plugin/hwdownload/download and click: Unlock Bootloader.
Make an Account or Login with your Huawei-ID, click again: Unlock Bootloader. Fill out form - you can find all information in Settings "About the Phone" and "Status" - for the Product-ID use dialer ( *#*#1357946#*#* ). Submit information and you receive the Unlock Code.
- On your phone activate the developer options (Settings "About the phone" press several times consecutively the "Build-Number")
- In developer options activate "USB-Debugging"
- In Settings "Security" activate "Unknown Sources" and HiSuite HDB accept
- install the latest HiSuite (from Huawei) on your PC - Download: http://consumer.huawei.com/minisite/HiSuite_en/index.html
- start HiSuite and connect your Phone with the USB-Cable with your PC. You will receive a fingerprint question on your Phone, acitvate "Always" and "Yes"
- accept also the installing of HiSuite on your Phone. As soon the drivers are installed and your phone is succesful connected, close HiSuite (even in the background).
- unzipp "Minimal ADB + Fastboot", install it on your PC - Download: https://www.androidfilehost.com/?fid=385035244224386526
- (the path will be C:\Program Files (x86)\Minimal ADB and Fastboot) - after open the Program as Administrator
- tap: adb devices (your device must listed with ID)
- tap: adb reboot bootloader (Phone restart in Fastboot-Mode) You will see, your bootloader is locked
- wait until PC installs additional drivers, after:
- tap: fastboot devices (your device must listed with ID)
- tap: fastboot oem unlock YOUR16DIGITCODE (which you have received from Huawei) - after unlock tap: fastboot reboot
If you have problems to execute fastboot-commands and you see just: "Waiting for any devices" - or if you have trouble with hardware-buttons read following information: http://forum.xda-developers.com/showpost.php?p=69440645&postcount=129
Old methods (2016) - not reccomended for newer Firmwares (2017..)
It is no more possible to Root Huawei Firmware up to EMUI 4.01 with newer Versions of SuperSU (current stable 2.78) neither with the Force Systemless Command! Dont try it, because SuperSU will destroy the original boot.img of the Firmware - See Screenshot 1. You can flash the zip but your phone would not boot and staying on the Rescue-Screen of the Bootloader.... That´s why I maked this Thread!
All methods updated 13.10.2016 - everything works now! .
For systemless rooting (like my method A) you can also use the SRKToolHuawei 2.0 by @somboons
- Download: https://www.androidfilehost.com/?fid=529152257862664925 - Thread: http://forum.xda-developers.com/mate-8/development/tool-srk-tool-huawei-t3369797
Before you going to root your phone make a full Nandroid Backup (all shown Partitions) with TWRP - if something goes wrong you can restore your backup.
Thread for German Speakers GRA-L09: http://www.android-hilfe.de/thema/huawei-p8-b380-root-anleitung.797464/
Requirements:
1) Unlocked Bootloader:
If your Bootloader is locked install the App Huawei-ID on your Phone. On newer Firmwares, the Huawei-ID App is already preinstalled.
But anyway update it to this version: https://www.androidfilehost.com/?fid=385035244224383206
After you must visit website for login and requesting the unlock-code. Visit: http://emui.huawei.com/en/plugin/hwdownload/download and click: Unlock Bootloader.
Make an Account or Login with your Huawei-ID, click again: Unlock Bootloader. Fill out form - you can find all information in Settings "About the Phone" and "Status" - for the Product-ID use dialer ( *#*#1357946#*#* ). Submit information and you receive the Unlock Code.
- On your phone activate the developer options (Settings "About the phone" press several times consecutively the "Build-Number")
- In developer options activate "USB-Debugging"
- In Settings "Security" activate "Unknown Sources" and HiSuite HDB accept
- install the latest HiSuite (from Huawei) on your PC - Download: http://consumer.huawei.com/minisite/HiSuite_en/index.html
- start HiSuite and connect your Phone with the USB-Cable with your PC. You will receive a fingerprint question on your Phone, acitvate "Always" and "Yes"
- accept also the installing of HiSuite on your Phone. As soon the drivers are installed and your phone is succesful connected, close HiSuite (even in the background).
- unzipp "Minimal ADB + Fastboot", install it on your PC - Download: https://www.androidfilehost.com/?fid=385035244224386526
- (the path will be C:\Program Files (x86)\Minimal ADB and Fastboot) - after open the Program as Administrator
- tap: adb devices (your device must listed with ID)
- tap: adb reboot bootloader (Phone restart in Fastboot-Mode) You will see, your bootloader is locked
- wait until PC installs additional drivers, after:
- tap: fastboot devices (your device must listed with ID)
- tap: fastboot oem unlock YOUR16DIGITCODE (which you have received from Huawei) - after unlock tap: fastboot reboot
If you have problems to execute fastboot-commands and you see just: "Waiting for any devices" - or if you have trouble with hardware-buttons read following information: http://forum.xda-developers.com/showpost.php?p=69440645&postcount=129
2) There is a new TWRP released by KangV from the Huawei Rom Team (HRT) v. 3.0.2 - multilingual. ​ Download: https://www.androidfilehost.com/?fid=529152257862681510
- rename the .img to "TWRP" (TWRP.img) and flash it with ADB.
- first store the TWRlP.img in C:\Program Files (x86)\Minimal ADB and Fastboot, after open the Program (Phone must be connected with USB to PC)
- tap: adb devices (your device must listed with ID)
- tap: adb reboot bootloader (Phone restart in Fastboot-Mode - you will see, your bootloader is unlocked now)
- tap: fastboot flash recovery TWRP.img
If the flashing of the Recovery is succesfully done - disconnect your Phone from USB!
- press the Vol+ button first (staying on Vol+) and simultaneously press the Power Button
- wait until the phone reboot - in the moment you see the Huawei Logo skip pressing the Power Button but stay on Vol+ until you are succesfully bootet to TWRP
- TWRP ask you by the first start for root access "Allow to modify system partion" - swype to confirm "yes"
- go to button "Backup", select your external Storage and make a complete Nandroid Backup of all shown partititions
- after you can Root your Phone now - see description
Note: If you make something wrong booting first time to TWRP and the Phone reboot to system instead of TWRP, Stock-Recovery will be reflashed and you must flash TWRP again with ADB
A) Rooting in systemless Mode (by maintaining the original Stock-Kernel)
Note: This kind of rooting your phone is for for normal use (Root-Explorer, Root-Apps) but not for Hardliner-Mods
Your TWRP should always have write permissions, if it ask you swype to confirm this! If it don`t have, you can enable this in the Mount button (disable system partition read only)
1.) Download SuperSU with your Browser (not with Downloadmanager) 2.67: https://download.chainfire.eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip?retrieve_file=1
- or download the file from the attached file below in OP and place SuperSU 2.67 on the external SD
2.) Boot to TWRP and make a complete Nandroid Backup first (if you dont have it already)
3.) In TWRP go to the Advanced button and use the Terminal.
On the first screen tap on the ok button and after write following Force Systemless Command:
echo SYSTEMLESS=true>>/data/.supersu
and quit this with the ok tab
4.) Navigate back to the main menu and use the Install button
5.) Navigate to the location of the placed SuperSU 2.67
6.) Swype to confirm flash - after use: Reboot
7.) If TWRP ask you for Root - "Your device does not appear to be rooted - Install SuperSU now?" - NO - use: DO NOT INSTALL Button!
Older Versions of TWRP ask you this - the newest TWRP 3.0.2 dont.
8.) P8 reboots now 2 times and rebooted finaly to system.
9.) Open the SuperSU App (it will be on an empty site of your home) - you have now systemless Root
10.) Open Playstore an Update the SuperSU and after say yes to Update the Binary.
11.) The Phone must be restarted and you are up-do-date with the Root.
Uninstall this kind of Root:
If you want to unroot your Phone and you have used method A, do following:
1) If you have Xposed Framework installed - uninstall it with the uninstaller.zip (matching your phone) in TWRP - directly after you must Wipe Cache and Dalvik - next step: reboot your phone.
2) If you have BusyBox installed - uninstall it with BusyBox-Cleaner.zip in TWRP - Download: https://www.androidfilehost.com/?fid=24591000424941581
3) Reboot Phone open SuperSU and tap "complete Unroot"
4) If SuperSU ask you to restore your original Boot Image - say yes!
5) If the phone reboot automatically Unroot is ready - check it with Root Checker
6) If the phone dont reboot automatically, boot into TWRP and:
7) flash unsu.zip - Download: http://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893 - reboot your Phone and Unroot is ready.
8) If the Download-Link of unsu.zip has changed, because it gets updates - you find it on this site: http://forum.xda-developers.com/showpost.php?p=63615067
B) Rooting in SYSTEM-Mode (by using modified Stock-Kernel made for Rooting with SuperSU)
1.) Download SuperSU - current version 2.79 Stable (with Browser, not with Downloadmanager): https://download.chainfire.eu/1016/SuperSU/UPDATE-SuperSU-v2.79-20161211114519.zip?retrieve_file=1- it is the original one from Chainfire, not CCMT
2.) Download the Kernel, which allow you to Root: https://www.androidfilehost.com/?fid=385035244224383592
3.) Place both zips on the external SD
4.) Reboot to TWRP Recovery
5.) Make a comlete Nandroid Backup
6.) Navigate back to the main menu
7.) Use: Install - and navigate to the place of the Kernel-for-Root-Stock-MM.zip
8.) Swype to confirm flashing the Kernel-for-Root-Stock-MM.zip
9.) Directly after this flash navigate back to the main menu
10.) Use: Install - navigate to SuperSU.zip
11.) Swype to confirm flashing SuperSU - after use: Reboot
12.) If TWRP ask you for Root - "Your device does not appear to be rooted - Install SuperSU now?" - NO - use: DO NOT INSTALL Button!
Older Versions of TWRP ask you this - the newest TWRP 3.0.2 dont.
13.) P8 reboots one times directly to the system
14 Open the SuperSU App (it will be on an empty site of your home) - you have now Root in the System with the latest stable SuperSU
Unroot this Installation of Root in System-Mode:
1) If you have Xposed Framework installed - uninstall it with the uninstaller.zip (matching your phone) in TWRP - directly after you must Wipe Cache and Dalvik - next step: reboot your phone.
2) If you have BusyBox installed - uninstall it with BusyBox-Cleaner.zip in TWRP - Download: https://www.androidfilehost.com/?fid=24591000424941581
3) Reboot Phone open SuperSU and tap "complete Unroot" - Needs some seconds, after:
4) flash unsu.zip - Download: http://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893 - reboot your Phone and Unroot is ready.
5) If the Download-Link of unsu.zip has changed, because it gets updates - you find it on this site: http://forum.xda-developers.com/showpost.php?p=63615067
6) Reboot your Phone, and if
7) If TWRP ask you for Root - "Your device does not appear to be rooted - Install SuperSU now?" - NO - use: DO NOT INSTALL Button!
Older Versions of TWRP ask you this - the newest TWRP 3.0.2 dont.
8) After Reboot check it with a Root Checker - Your devices is not Rooted!
C) Systemless Rooting (by using modified Stock-Kernel made for Rooting with SuperSU)
Note: This is the only kind of Root to install the Systemless Xposed Framework!
This Thread does not officially Support the issue "how do hide Root" . Please use other Threads made for this. But you're invited to post ideas and solutions for this issue - if you have any! Because many people searching for a good solution
1.) Download SuperSU - current version 2.79 Stable (with Browser, not with Downloadmanager): https://download.chainfire.eu/1016/SuperSU/UPDATE-SuperSU-v2.79-20161211114519.zip?retrieve_file=1 - it is the original one from Chainfire, not CCMT
2.) Download the Kernel - which allows you to Root: https://www.androidfilehost.com/?fid=385035244224383592
3.) Place both zips on the external SD
4.) Reboot to TWRP Recovery
5.) Make a comlete Nandroid Backup
6.) Navigate back to the main menu
7.) Use: Install - and navigate to the place of the Kernel-for-Root-Stock-MM.zip
8.) Swype to confirm flashing the Kernel-for-Root-Stock-MM.zip
9.) Directly after this flash navigate back to the main menu
10.) After go to the Advanced button and use the Terminal.
On the first screen tap on the ok button and after write following Force Systemless Command:
echo SYSTEMLESS=true>>/data/.supersu
and quit this with the ok tab
11.) Use the install button and navigate to SuperSU.zip
12.) Swype to confirm flashing SuperSU
13) Reboot your Phone
14.) If TWRP ask you for Root - "Your device does not appear to be rooted - Install SuperSU now?" - NO - use: DO NOT INSTALL Button!
Older Versions of TWRP ask you this - the newest TWRP 3.0.2 dont.
15.) P8 reboots now 2 times and rebooted finaly to system.
16 Open the SuperSU App (it will be on an empty site of your home) - you have now systemless Root with the latest stable SuperSU
Uninstall this kind of systemless Root:
If you like to Unroot your Phone from this systemless Root, do following steps:
1) If you have Xposed Framework installed - uninstall it with the uninstaller.zip (matching your phone) in TWRP - directly after you must Wipe Cache and Dalvik - next step: reboot your phone.
2) If you have BusyBox installed - uninstall it with BusyBox-Cleaner.zip in TWRP - Download: https://www.androidfilehost.com/?fid=24591000424941581
3) Reboot Phone open SuperSU and tap "complete Unroot"
4) If SuperSU ask you two times to restore the original Stock-Boot Image say: YES
5) Phone reboots automatically
6) Check it with Root Checker: succesfully unrooted
7) If the phone dont reboot automatically - reboot by yourself to TWRP
8) flash unsu.zip - Download: http://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893 - reboot your Phone and Unroot is ready.
9) If the Download-Link of unsu.zip has changed, because it gets updates - you find it on this site: http://forum.xda-developers.com/showpost.php?p=63615067
10) Reboot your Phone - Root is uninstalled
After you have rooted your phone - it is recommended to flash Busybox in TWRP:
I always prefere BusyBox YDS by YashdSaraf for Huawei P8. This busybox recognizes which kind of Root and architecture you have and it will install to in the right directory. It uses also arm64 Binarys - just flash it after Rooting and first boot to system with TWRP.
You can find the Thread here: http://forum.xda-developers.com/android/software-hacking/tool-busybox-flashable-archs-t3348543
Use in Download Section the Universal zip or the ARM zip (it conains arm64).
Credits:
Many thanks to @Chainfire for his grandiose SuperSU
Many thanks to @AD2076 for the new TWRP-Recovery twrp-3.1.1-0-grace.img for Huawei p8 marshmallow.
And thanks a lot to @YashdSaraf for very good BusyBox
Last Update: 06.02.2018

Will this work on GRA-UL10?
Thanks a lot.

lordcookies said:
Will this work on GRA-UL10?
Thanks a lot.
Click to expand...
Click to collapse
Sorry for my late answer. I saw your message just right now. GRA-UL10 is Chinese Unicom Dual 4G model, with Kirin 935 chipset and 64GB ROM. Which firmware version do you have? The Root Method A should work without problem. Be sure you make before rooting a complete Nandroid Backup. If something goes wrong you can reboot to TWRP with hardware keys and restore system, data and boot. So nothing bad could happened.
The Methods B and C needs to flash the Custom Kernel, I don't know if it works with GRA-UL10. But with a Full TWRP Nandroid Backup you can try... Please let me know if it works for you
Info:The TWRP should work with GRA-UL10 without problems - or do you have another one working for marshmallow? If yes, please post. Thanks

Result without success
Hi, thanks for your post. I tried with the first option with SYSTEMLESS and STOCK Kernel. Everything worked as you described but after I tried to reboot the phone was dead. I had to reinstall the B370 update I had in /dload folder. I followed very carefully your instructions step by step.
First successful rooted boot, I updated SuperSu with the binary option and rebooted without problems. But one hour after I tried to reboot the phone manually and then the problem appeared.
My phone is working now but I don't know how to make this permanent. Do you have any idea?
Ps: attached screenshot of my current build
Thanks again!

juanzete said:
Hi, thanks for your post. I tried with the first option with SYSTEMLESS and STOCK Kernel. Everything worked as you described but after I tried to reboot the phone was dead. I had to reinstall the B370 update I had in /dload folder. I followed very carefully your instructions step by step.
First successful rooted boot, I updated SuperSu with the binary option and rebooted without problems. But one hour after I tried to reboot the phone manually and then the problem appeared.
My phone is working now but I don't know how to make this permanent. Do you have any idea?
Ps: attached screenshot of my current build
Thanks again!
Click to expand...
Click to collapse
Did you have a custom Rom before? I am wondering - normally the Model number shows Huawei GRA-L09 or GRA-UL00 and not GRACE. Grace is both http://consumer.huawei.com/tz/support/products/technicalspecs/grace-tz.htm?utm_source=Viber&utm_medium=Chat&utm_campaign=Private
So, which Model do you have? Please tell me.
You said you did it step by step with my instruction. I wrote several times to make a Backup of system, data and boot with TWRP. You had TWRP, otherwise you could not flash SuperSU. If the phone got a problem you could boot it to TWRP by holding vol+ and power key and restore the backup. No need to flash again the firmware. Didn't you make a TWRP Nandroid Backup?
The other thing I cannot understand is - normally it is absolutely necessary to flash back the Original Stock Recovery before doing any stock firmware update with dload. And it is also important to unroot. I am wondering if this was successful...
Which Rom (version) did you have before? Was your phone rooted before b370? Did you unroot before upgrade to this version? Did you make a full Wipe before upgrading or a factory reset? If you use b370 your model must be GRA-L09. Because the other models have not this version yet. (if my information is right)
I don't think the problem is the Root Method A.
If your Model is really a GRA-L09 I would recommend Root Method B or C with the custom Kernel. But if you use at the moment a Custom Rom instead of the stock firmware there would no need to root because having already root.
Something in the story is not conform but I need more information to get an idea what is the specific problem. Because I tested all three Versions without any problem...

No, I did not have a custom ROM. The GRACE model appeared as soon as I updated with an official B370 Europe. In fact I have my bootloader unlocked and I had to use this Model Name to get the unlock code from Huawei. Before doing the update I had GRA-L09.
Yes, I have a TWRP backup, I made it before rooting but I didn't use it because the only way to power on the device was either bootloader or recovery (Vol- & Power / Vol+ & Power)
When I tried recovery, Huawei's recovery appeared taking my update.app on /dload (didn't have any other option at that moment, the process started automatically). I didn't lose any data, the phone after the update started normally with all my settings exactly as it was before rooting, but this time SuperSU says the phone needs to be rooted.
For some reason TWRP is not installed anymore. If I try now, the Huawei Recovery starts. I currently have B370 same as before rooting. No full wipe before upgrading neither a factory reset.
I read that Huawei Stock recovery can rewrite your custom recovery, is that possible?
J.

Of course. After flashing the Recovery you must disconnect the USB cable from Phone and PC and boot manually with vol+ and power until you see the Huawei Logo. In that moment you must leave the power button but holding vol+ until the TWRP starts. This need a while. If you don't do this, Stock Recovery will be reflashed. Only the first boot to Twrp is important. After that TWRP will not be overwritten anymore. I am wondering about Model "Grace" I had b321a before and make the update with full firmware - after it shows me also GRA-L09 and not GRACE... Anyway. Sometimes things are strange. Okay. You must flash TWRP again and immediately after successful flashing manually boot to Twrp - but disconnect from PC!
Before all doing this be sure you have the Custom Kernel and SuperSU 2.76 on your SD. Flash first the Kernel and after SuperSU 2.76 - if you want systemless then with Force systemless Command before, if you want Root in System then without this command. And you will be happy and no more having problems with Root

The problem was, that you did not manually reboot to Twrp after flashing

@juanzete - Did you solve your problems now and Root is succesful? @lordcookies Did you try one of the root method for your GRA-UL00?

Tanks
Tanks a lot.It worked for me.(GRA-UL10):good:
---------- Post added at 09:33 AM ---------- Previous post was at 09:08 AM ----------
lordcookies said:
Will this work on GRA-UL10?
Thanks a lot.
Click to expand...
Click to collapse
Yes It Works.

SMhd3000 said:
Tanks a lot.It worked for me.(GRA-UL10):good:
---------- Post added at 09:33 AM ---------- Previous post was at 09:08 AM ----------
Yes It Works.
Click to expand...
Click to collapse
Which one of the three Root method did you use? I would like to know, thanks

GRA-L09, method 3 works but root isn't systemless. I am trying to install systemless xposed but it fails because of system mode root... Any ideas?
Before you ask:
I flashed the custom kernel properly
/data/.supersu is present and contains SYSTEMLESS=true
I said NO to TWRP root offer

AD2076 said:
GRA-L09, method 3 works but root isn't systemless. I am trying to install systemless xposed but it fails because of system mode root... Any ideas?
Before you ask:
I flashed the custom kernel properly
/data/.supersu is present and contains SYSTEMLESS=true
I said NO to TWRP root offer
Click to expand...
Click to collapse
Hi, I made a new Kernel specifically for SuperSU 2.78 - you can download it: https://www.androidfilehost.com/?w=files&flid=109256
Before you try method 3 with the new Kernel and the Original SuperSU 2.78: https://download.chainfire.eu/1001/SuperSU/UPDATE-SuperSU-v2.78-20160905010000.zip - you must Unroot your Phone and after install again. It should work.
I tested method 3 several times without any problems.

Tecalote said:
Hi, I made a new Kernel specifically for SuperSU 2.78 - you can download it: https://www.androidfilehost.com/?w=files&flid=109256
Before you try method 3 with the new Kernel and the Original SuperSU 2.78: https://download.chainfire.eu/1001/SuperSU/UPDATE-SuperSU-v2.78-20160905010000.zip - you must Unroot your Phone and after install again. It should work.
I tested method 3 several times without any problems.
Click to expand...
Click to collapse
I am gonna try it. Of course I unrooted before trying.
The big problem is I have to completely unroot at every reboot if I wanna play that throw a ball to the monster game
On another device I have systemless root + systemless xposed + suhide and I can play with no problems.
Does this kernel have adb enabled?

AD2076 said:
I am gonna try it. Of course I unrooted before trying.
The big problem is I have to completely unroot at every reboot if I wanna play that throw a ball to the monster game
On another device I have systemless root + systemless xposed + suhide and I can play with no problems.
Does this kernel have adb enabled?
Click to expand...
Click to collapse
If you have then succesful rooted and Xposed Framework installed you can try Module RootCloak

Tecalote said:
If you have then succesful rooted and Xposed Framework installed you can try Module RootCloak
Click to expand...
Click to collapse
RootCloack doesn't bypass SafetyNet check, suhide does.
I can root successfully but there are problems because the root isn't really systemless and SafetyNet detects it even with suhide.
Furthermore systemless xposed fails to install and complains about the supersu version < 2.76.
Of course I used 2.78
Btw your kernel works but required some reboots to work properly. At first boot SIM was not detected and the system was very very laggy.
I am available for more testing

Which Firmware to you use? I have tested it on b370, but with SuperSU 2.76- I will try it again in the evening with 2.78
I cannot understand yet, why it dont root systemless with method 3.
And RootCloack is available also with Support MM (new version) - do you mean, this dont hide root for your game? I write again, as soon I have time solving your issue.

Tecalote said:
Which Firmware to you use? I have tested it on b370, but with SuperSU 2.76- I will try it again in the evening with 2.78
I cannot understand yet, why it dont root systemless with method 3.
And RootCloack is available also with Support MM (new version) - do you mean, this dont hide root for your game? I write again, as soon I have time solving your issue.
Click to expand...
Click to collapse
I use B370 FF Edition from Blackball.
I just noticed I have an old twrp version: 2.8.7.0 by Jemmini. I am gonna upgrade and see if suhide works, it requires twrp > 3

B370 FF Edition is prerooted in Systemmode. I think, thats why the SuperSU Installer ignore perhaps the systemless command.
Dont know if there is a way to do it. May you ask Fromfuture in his Thread.
Or you install the Original Stock Version b370.

I used the completely unroot option in supersu before rooting systemless

Sony Xperia Z4/Z3+ (E6553/6533) Downgrade Nougat to Marshmallow

After hearing a lot of people having problem with the Sony Official Nougat update (7.0 ver. 32.3.A.0.376) in past recent months, I hence decided to make a guide on how to downgrade (6.0.1 ver. 32.2.A.5.11) for N00bs​
HTML:
/*
* Your warranty will not be void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Follow instruction properly and you are good.
*/
Prerequisite
1. Xperia Z3+ drivers (adb, fastboot/s1 drivers)
2. Flashtool (optional Xperifirm, it comes with XperiFirm in built) Dev by @Androxyde -
FlashTool by Androxyde
3. Marshmallow Rom (in .ftf format)
4. Phone with atleast 70~80% battery
5. Windows 7 is higly recommended so you can install unsigned drivers for your phone without any hassle
WIndows 8 and 8.1 - Flashtool/Fastboot ADB Driver Fix​
Notes:
Make sure to Backup all your files (Internal Memoy) and keep it somewhere safe on PC or External Storage, as this method will erase everything from Phone.
This method is working on Locked Bootloader and Non Rooted device, so it is advisable to do it in the same conditions otherwise official roms won't work.
-: SO LETS BEGIN :-​
1. Install Right Drivers for your phone
Flashtool and Fastboot Drivers Pack - Only Check FlashTool Drivers and Fastboot Drivers no other divers required while installing.
S1 Boot Driver - Download and Install it via Device Manager How to Install Driver for Xperia from Device Manager​
2. Open Xperifirm, find your device on left window
In flashtool click 'XF' button on utility bar​
3. Find your Market (for example, India) and your Operator (for example, Customized IN)
4. In XperiFirm far right under your Xperia Model Preview , you can see available firmware - Download the one which you see is Marshmallow, Click Download and wait till it finishes.
(for example - 32.2.A.0.305 and 32.2.A.5.11 are same Android Marshmallow variant with different security patches and bug fixes but for different countries, UK and India respectively, so it will work just make sure it is Marshmallow by Googling the version number)
5. After firmware download completed, open FlashTool -> Tools -> Bundles -> FILESET Decrypt. And now locate your downloaded firmware files which is 'FILE_XXXXXXXX' and other many more like this in a folder, select the containing folder. Now in FlashTool window select all the files with same name structure (example: FILE_58854456) if there are any other files like 'fwinfo' or 'info' DO NOT SELECT IT, I RECOMMEND DELETE IT FROM THE FOLDER. After making selection hit the " -> " key , it will move the contents to right. Click Convert.FILESET Decrypt Tutorial with Pictures (External Site/NON-XDA)
6. After 'Decrypt' completes it will open a 'Bundler' window, here you need to select file from left and click ' -> ' to move it to the right, you need all files except xml files (example: boot_delivery.xml, fota.xml). The TA files didnt made any problems while flashing or booting in my experience. So, Include '.sin' and '.ta' files and no problem will prevail.
7. In FlashTool now, plug your phone (do not use MTP mode if asked on phone, keep in Charging Only) and you will see a message on FlashTool [ Device connected with USB debugging off ] so go to Settings -> About -> Build Number (Tap 5 Times) -> Settings -> Developer Option -> Enable USB Debugging. [Phone if asks - Allow USB Debugging on this device? - Click Always allow and then Yes/Okay]
8. In FlashTool click on Thunder icon from Utility bar, and select Flashmode. After this Open your rom folder were you downloaded (.ftf) earlier.
9. Choose your Device filter name by clicking the greyed out panel. Write Branding (= Operator from XperiFirm) and Version (in my case 32.2.A.5.11) of your Rom. Now Select eveything from '"Wipe Box" - Cache, Data, APPSLOG .etc' (will clear everything from your device, make sure to backup your internal storage)
10. Do not check or Uncheck anything from Exclude Sin and Misc. TA box. Click on flash.
11. FlashTool will show a mesaage Preparing files for Flashing wait for it, after that it will tell you to go into fastboot mode, to do this simply follow this:
-> Disconnect USB
-> Power off Device
-> Press Volume Up button Phone
-> While Pressing Volume Up Button Connect USB Cable
Now a Green and Blue led will blink and stays constant blue/green there while Fastboot starts flashing files.
12. Now after the flashing completes the device will reboot and you will get Marshmallow. :fingers-crossed:
Don't forget to say Thanks if it worked for you, It is my first time posting here on XDA Hope you liked the tutorial.
Ask questions i will try to give answers.

Thank you my brother. Will try it... I will work with marshmallows until Sony fix the big bugs on nougat

microlynz said:
Thank you my brother. Will try it... I will work with marshmallows until Sony fix the big bugs on nougat
Click to expand...
Click to collapse
Or u can do it in more easiest way!! Just download ur country ftf from Xperiablog and flash it through latest flashtool (; gud luck

Pwruser said:
Or u can do it in more easiest way!! Just download ur country ftf from Xperiablog and flash it through latest flashtool (; gud luck
Click to expand...
Click to collapse
I didn't. I found the last update of nougat (March 2017) very good. I'll stay actually on nougat and hope Sony continue updating
Thanks brother

microlynz said:
I didn't. I found the last update of nougat (March 2017) very good. I'll stay actually on nougat and hope Sony continue updating
Thanks brother
Click to expand...
Click to collapse
Ya I agree!! but still nougat is a buggy release from Sony.. It is incomplete!! U can't get that satisfaction what u got on MM!! Big cores disabled in nougat... U can't even watch the more realistic 1080p 60fps on YouTube.. Heats.. Lags..its a flight flying with one wing!! MM WAS A CHARM

My last update was 32.3.A.2.33 , what was before that one?
can someone share a list of firmwares for Xperia z3+?

whats is the difference between regions ? RU,hk, LA, etc ?

Bloatware..

I tried flashing 6.0.1 coming from 7.1.1 but wont work.
I have root access, unlocked bootloader. Do i need to relock bootloader and unroot my device to be able to downgrade from 7.1.1 to 6.0.1