WHAT IS THE USE OF .pit FILE?
.pit FILE IS USED TO DIRECT THE PARTITION OF THE WHOLE ANDROID SYSTEM..JUST LIKE WE ARE DOING GRUB IN PC...HERE ALSO WE NEED TO PARTITION THE SYSTEM FOR FLASHING THE FIRMWARE PROPERLY.. AND HERE THE .PIT IS USED
1. Get your phone into download mode..
2. connect to computer. Make sure that usb drivers installed and you have the firmware.tar file.
3. Now open odin 3.10
4. click on PIT and select ZEROLTE_USA_TMO.pit
5. Make sure that partition is tick
6. click on PDA and select firmware.tar file
7. Now start button and wait...You are done
link:
The file is not a suitable version 5.1.1
You do realize this is the 920T section, not the 925T?
update
SHATTAH said:
I know what I wrote and I tried it
it is only for g925T not g920T
Click to expand...
Click to collapse
Then you should probably go post it in the g925T section.
ops....
You're right
I did not see where I publish
I move it there now
:crying::cyclops::good:
Lol on this thread........
jeffreylin_ said:
You should also remove the link in the OP so that people don't accidently flash it.
How did you extract the PIT? I don't seem to have any luck doing so on my G920T.
Click to expand...
Click to collapse
OK
Within a few hours I also raised the PIT for G920T
SHATTAH said:
OK
Within a few hours I also raised the PIT for G920T
Click to expand...
Click to collapse
Do you have the pit file for the 920t?
Fightoffyoredeamons said:
Do you have the pit file for the 920t?
Click to expand...
Click to collapse
It looks like the OP did get it for us.
Check his last reply, and then look at the last time he edited the first post.
SHATTAH said:
OK
Within a few hours I also raised the PIT for G920T
Click to expand...
Click to collapse
Did you dump the pit or make the pit with pit magic? If it's dumped can you please tell us how because we need the three different storage sizes for every variant.
Anyone have this please? Trying to return my s6 back to stock with my Mac
SHATTAH said:
WHAT IS THE USE OF .pit FILE?
.pit FILE IS USED TO DIRECT THE PARTITION OF THE WHOLE ANDROID SYSTEM..JUST LIKE WE ARE DOING GRUB IN PC...HERE ALSO WE NEED TO PARTITION THE SYSTEM FOR FLASHING THE FIRMWARE PROPERLY.. AND HERE THE .PIT IS USED
1. Get your phone into download mode..
2. connect to computer. Make sure that usb drivers installed and you have the firmware.tar file.
3. Now open odin 3.10
4. click on PIT and select ZEROLTE_USA_TMO.pit
5. Make sure that partition is tick
6. click on PDA and select firmware.tar file
7. Now start button and wait...You are done
link:
https://drive.google.com/folderview...dONG56UlBrd2s1eVZocmY0YzQ3a00&usp=sharing_eid
Click to expand...
Click to collapse
Does someone have another link? Can't seem to get this to download.
Cummins4 said:
Does someone have another link? Can't seem to get this to download.
Click to expand...
Click to collapse
Count yourself lucky you cant. He hasn't stated what storage size this is made for and doesn't seem interested in replying to questions. He probably made it with pit magic and you could do the same. I looked into it and it looks easy enough but it would take quite a while to make one so I decided not to since I personally don't need it. It is very important that storage size matches your phone otherwise your 128gb phone could turn into a 32 or the reverse (you wouldn't gain any space but You would get data corruption).
ThePagel said:
Count yourself lucky you cant. He hasn't stated what storage size this is made for and doesn't seem interested in replying to questions. He probably made it with pit magic and you could do the same. I looked into it and it looks easy enough but it would take quite a while to make one so I decided not to since I personally don't need it. It is very important that storage size matches your phone otherwise your 128gb phone could turn into a 32 or the reverse (you wouldn't gain any space but You would get data corruption).
Click to expand...
Click to collapse
Thanks, I'll look into it tonight. Not sure if this will help my situation, not like I can break it, my phone is useless as is. Just figured there would be a way back as long as you could get into download.
Hello need a pit file for G920T Please help where can i download ?
---------- Post added at 05:10 PM ---------- Previous post was at 05:07 PM ----------
Cummins4 said:
Does someone have another link? Can't seem to get this to download.
Click to expand...
Click to collapse
Your Link is Not Working Bro No File Found
jrock79 said:
Anyone have this please? Trying to return my s6 back to stock with my Mac
Click to expand...
Click to collapse
Try using Samsung Kies.
Related
Here is a good NAE PIT file for anyone who needs it.
https://www.dropbox.com/s/g4vurphkhc8o83p/Sprint_NAE_L720-16GB.pit?dl=0
The md5sum of the PIT I printed from my MK2 phone has a different value than the PIT you posted, but I have used it to flash things without issue. Do the PITs change with each update (ie MK2 -> NAE)?
i have no idea what this is even for.
jackrabbit72380 said:
i have no idea what this is even for.
Click to expand...
Click to collapse
PIT stands for Partition Information Table, and is used in conjunction with ODIN or heimdall to flash Samsung devices. Here are two quick reads that explain the basics of PIT files. And as for my question above, it appears that the PIT file can change with new firmware releases.
Sleepycloud said:
Here is a good NAE PIT file for anyone who needs it.
https://www.dropbox.com/s/g4vurphkhc8o83p/Sprint_NAE_L720-16GB.pit
Click to expand...
Click to collapse
I'm not sure this is ever needed except in dire circumstances.
AFAIK if you get a PIT file missing (or not found, or needed, or whatever PIT error) that just means that you need to plug your USB cable directly into the back of your computer in a port that is on the motherboard and not a hub or pci card. With the factory cable.
I've ran into a PIT error two times, and both times "fixed" it by going direct. Actually it fixed itself.
That being said... Thank you for providing it, can't hurt to download it just in case.
How does one make a PIT file tho? Im cause so I can get some of the Cricket S4 PIT files.
Warboy said:
How does one make a PIT file tho? Im cause so I can get some of the Cricket S4 PIT files.
Click to expand...
Click to collapse
Use heimdall on a linux system to print your PIT file. If you're not command line savvy (like me) there is a GUI available that is pretty straightforward.
Edit: also check out this thread.
Sleepycloud said:
Here is a good NAE PIT file for anyone who needs it.
https://www.dropbox.com/s/g4vurphkhc8o83p/Sprint_NAE_L720-16GB.pit
Click to expand...
Click to collapse
Sir can you please post another link because this one doesn't work. Thanks
otikokoso said:
Sir can you please post another link because this one doesn't work. Thanks
Click to expand...
Click to collapse
I updated the link bro. Hit the thanks button please sir. Need anything else message me.
mxmr said:
The md5sum of the PIT I printed from my MK2 phone has a different value than the PIT you posted, but I have used it to flash things without issue. Do the PITs change with each update (ie MK2 -> NAE)?
Click to expand...
Click to collapse
Not usually. A PIT file is just a partition information table. Usually they don't change. You should research before you use anything though bro. Message me if you need anything else.
I"m on the Sprint Note 5 now if anybody else is go to that forum.
wilzard said:
I'm not sure this is ever needed except in dire circumstances.
AFAIK if you get a PIT file missing (or not found, or needed, or whatever PIT error) that just means that you need to plug your USB cable directly into the back of your computer in a port that is on the motherboard and not a hub or pci card. With the factory cable.
I've ran into a PIT error two times, and both times "fixed" it by going direct. Actually it fixed itself.
That being said... Thank you for providing it, can't hurt to download it just in case.
Click to expand...
Click to collapse
Hey... I posted it because when you flash something you run the risk of malicious code being injected. Extra partitions contaning these malicious codes stay unless you nand erase and flash a .tar with a PIT file. This is why I provided the link. There are ton's of bad guys here. Many get banned when they are caught, but many are clever. When in doubt, nand erase the device and use a pit file with your .tar Wahlah.... I'm a helpful whitehat.
Just recently purchased a Note 4 off craiglist but didn't check if the firmware was genuine (my mistake), As I tried to root the device it stated its missing the PIT partition. Does anyone by any chance have these files? I also tried reflashing stock rom to see if that would fix the issue but the same issue comes up.
cchong4 said:
Just recently purchased a Note 4 off craiglist but didn't check if the firmware was genuine (my mistake), As I tried to root the device it stated its missing the PIT partition. Does anyone by any chance have these files? I also tried reflashing stock rom to see if that would fix the issue but the same issue comes up.
Click to expand...
Click to collapse
I asked a while ago and no one had. Tried to pull it myself and failed. Good luck
BAD ASS NOTE 4
Full file name?
Do you have the whole file name?
jarazmek said:
Do you have the whole file name?
Click to expand...
Click to collapse
It not a file you can pull from a file explorer.
BAD ASS NOTE 4 + BAD ASS GEAR S
cchong4 said:
Just recently purchased a Note 4 off craiglist but didn't check if the firmware was genuine (my mistake), As I tried to root the device it stated its missing the PIT partition. Does anyone by any chance have these files? I also tried reflashing stock rom to see if that would fix the issue but the same issue comes up.
Click to expand...
Click to collapse
Don't know if you still need it but here you go. Hope it helps somebody.
https://www.dropbox.com/s/uuzxds728f1ffam/Airtioteclint-n910t.pit?dl=0
Airtioteclint said:
Don't know if you still need it but here you go. Hope it helps somebody.
https://www.dropbox.com/s/uuzxds728f1ffam/Airtioteclint-n910t.pit?dl=0
Click to expand...
Click to collapse
Thanks! I was just about to comment on this saying that I didn't think we could still pull the .pit file from these phones, lol. If you don't mind me asking, how did you get ahold of this? I would like to know just for future knowledge just incase I run into something on another phone.
147aaron said:
Thanks! I was just about to comment on this saying that I didn't think we could still pull the .pit file from these phones, lol. If you don't mind me asking, how did you get ahold of this? I would like to know just for future knowledge just incase I run into something on another phone.
Click to expand...
Click to collapse
dd if=/dev/block/mmcblk0 of=/sdcard/(name).pit bs=1 skip=17408 count=2396
The count number is the length in bytes. 2396 is the size of my note 10.1 so I used it again here as they should be the same
Could someone PLEASE share the PIT file? I'm having an /efs issue so need this to factory wipe.
Thank You
Fas
No pit file can be pulled from this phone.
BAD ASS NOTE 4
Did you try this?
I want you to create or build your own “PIT” Re-Partition Table file using PIT Magic app, please grab it forum.xda-developers.com-thread-1916936 and then Create New PIT Files from scratch as the PIT Magic can control them and we can see the contents. Using a PIT data partition when flashing is something risky as it targets the system memory, one messed up the system memory could lead-up to undesirable outcomes, so that is why I want you to build your PIT file own, so when something might went wrong its your own creation.
Once you have your own Pit file, then proceed into flashing. Again make sure the battery is fully charge (recharge the battery using external battery charger or borrow from your neighbors Galaxy Note 4)
1. Boot the Galaxy Note 4 into download mode screen then connect to PC.
2. This time load the N910W8.pit Pit file on Odin’s PIT Button
3. Load your original stock firmware on the Odin’s PDA button.
4. Click on “Start” to flash the stock firmware and PIT file then wait.
southphillysean said:
Did you try this?
I want you to create or build your own “PIT” Re-Partition Table file using PIT Magic app, please grab it forum.xda-developers.com-thread-1916936 and then Create New PIT Files from scratch as the PIT Magic can control them and we can see the contents. Using a PIT data partition when flashing is something risky as it targets the system memory, one messed up the system memory could lead-up to undesirable outcomes, so that is why I want you to build your PIT file own, so when something might went wrong its your own creation.
Once you have your own Pit file, then proceed into flashing. Again make sure the battery is fully charge (recharge the battery using external battery charger or borrow from your neighbors Galaxy Note 4)
1. Boot the Galaxy Note 4 into download mode screen then connect to PC.
2. This time load the N910W8.pit Pit file on Odin’s PIT Button
3. Load your original stock firmware on the Odin’s PDA button.
4. Click on “Start” to flash the stock firmware and PIT file then wait.
Click to expand...
Click to collapse
AWESOME, I'll give it a shot. Thank You. We had them all for Note 3 (The CP/AP and BL files but can't find them for this phone. I'm having the Factory Mode on issue that stems from a bad/missing or corrupt /efs partition so trying to find a fix. I'll check it out and report back. +1!
Fas
faslane said:
AWESOME, I'll give it a shot. Thank You. We had them all for Note 3 (The CP/AP and BL files but can't find them for this phone. I'm having the Factory Mode on issue that stems from a bad/missing or corrupt /efs partition so trying to find a fix. I'll check it out and report back. +1!
Fas
Click to expand...
Click to collapse
Definetly let us know
BAD ASS NOTE 4
BACARDILIMON said:
Definetly let us know
BAD ASS NOTE 4
Click to expand...
Click to collapse
Just fixed my Factory Mode issue. I restored ONLY the EFS from a nandroid backup I had in TWRP. Hit restore, navigate to twrp/backups select the rom of like kind (Mine was from late 2014 even but same KK rom) and then restored ONLY the EFS file and rebooted. Factory Mode error gone and it automatically connected to wifi as per usual/norm which is one of the things this Factory Mode specifically mentions. All good!!!
Fas
Airtioteclint said:
Don't know if you still need it but here you go. Hope it helps somebody.
https://www.dropbox.com/s/uuzxds728f1ffam/Airtioteclint-n910t.pit?dl=0
Click to expand...
Click to collapse
hi friend. can you repost this? been going crazy looking for this. thankyou
PIT file
Hello Airtioteclint or whoever has the PIT file,
Sorry to bother you but I've searched all ends of the interweb and I can not for the love of me find that pit file for the SM-N910P. I was wondering if you can repost that file because I've been trying to flash my phone for the past 3 days now. It would be much appreciated and in return just name it. I will do everything in my power to return the favor. Thank you.
I know this is an old thread but if someone should happen to come across it here's a link to all the pit files from sammobile, hopefully this helps someone
https://www.sammobile.com/forum/showthread.php?t=30022
Anyone have a .pit file for a 870A, i've looked all over the place and can't find one.
Also, 16GB variant S5 Active for AT&T
Thank you!
I downloaded the stock rom to put it back like it was, says the rom doesn't include the PIT file. Please anyone can help let me know as soon as possible.. thanks
Found it... http://forum.xda-developers.com/showthread.php?t=2737448
drarkanex said:
Found it... http://forum.xda-developers.com/showthread.php?t=2737448
Click to expand...
Click to collapse
Where? I don't see a PIT file for SM-G870. They're all for the SM-G900.
Mattzees said:
Where? I don't see a PIT file for SM-G870. They're all for the SM-G900.
Click to expand...
Click to collapse
page 5 on the thread -- https://forum.xda-developers.com/t/...ract-post-your-pit-file.2737448/post-55071120
Thanks for replying. As it turns out, my phone's bootloader can't be unlocked, and so I don't need the PIT file.
Okay guys I think I've exhausted all of my options here's the short version of what's going on. I started the OTA update on my s5 and it got interrupted ( I don't really know how ) and it won't go past the Samsung boot screen (and it now says custom with an unlocked pad). After doing extensive research and downloads I can get the phone into Odin mode and into recovery mode. I tried flashing the stock rom, down grade roms and kernels of all variants through Odin and through recovery with no luck . Odin fails at secure system check and stock recovery says failed to find /system build.prop (no such file or directory). Viewing the recovery log It says my os is (oc4) and my bootloader is (oi5) no help from Samsung or AT&T. In Odin I am able to flash the oc4 kernel, modem and stock partitions. It says current binary SAMSUNG official system status custom Knox warranty void 0x0
Any advice would be greatly appreciated.
If anybody could help or is willing please let me know
Cam Shaft08 said:
If anybody could help or is willing please let me know
Click to expand...
Click to collapse
Try flashing this rom it is uploaded by muniz_ri
androidfilehost
. com
/
?fid=24052804347848936
it is oi5 it will pass secure check try it
it helped me with same problem
syedrazaabbas said:
Try flashing this rom it is uploaded by muniz_ri
androidfilehost
. com
/
?fid=24052804347848936
it is oi5 it will pass secure check try it
it helped me with same problem
Click to expand...
Click to collapse
I'm down loading it now. If it is the same one that has been up it won't work because I need an md5 and it will not sideload. I have to odin flash an md5.
Cam Shaft08 said:
I'm down loading it now. If it is the same one that has been up it won't work because I need an md5 and it will not sideload. I have to odin flash an md5.
Click to expand...
Click to collapse
make it odin flashable by using any tar.md5 program and then flash it the required files i do the same
syedrazaabbas said:
make it odin flashable by using any tar.md5 program and then flash it the required files i do the same
Click to expand...
Click to collapse
What program do you recommend
Cam Shaft08 said:
What program do you recommend
Click to expand...
Click to collapse
kindly tell me which files do you required i will convert and upload it for you
syedrazaabbas said:
kindly tell me which files do you required i will convert and upload it for you
Click to expand...
Click to collapse
Modem, kernel, recovery, stock partition. Basically I am trying to flash the rom in md5 section. Unless you want to convert the whole rom to md5 flashable for me.
Thank you for all of your help.
Cam Shaft08 said:
Modem, kernel, recovery, stock partition. Basically I am trying to flash the rom in md5 section. Unless you want to convert the whole rom to md5 flashable for me.
Thank you for all of your help.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BzQYyLb6zJczbE9SY0k5UVljMWs/view?usp=sharing
here are the files you are asking each file is seperate use AP button for boot and recovery and CP button for modem and Non-hlos
cheers
syedrazaabbas said:
https://drive.google.com/file/d/0BzQYyLb6zJczbE9SY0k5UVljMWs/view?usp=sharing
here are the files you are asking each file is seperate use AP button for boot and recovery and CP button for modem and Non-hlos
cheers
Click to expand...
Click to collapse
I am downloading them now. Thank you so much for all of your help. I will let you know what happens!! You have been a huge help.
OK I flashed all of those files with no errors. All 4 took perfect. Still stuck though. Could you upload the system file? An .md5 system file. I think it's system.ext4 when I watch odin flash. Thank you again for all your help.
Bump
Cam Shaft08 said:
Bump
Click to expand...
Click to collapse
hi sorry for the late as i was out of town so i will convert and upload the system.ext4 soon as it is a big file it need some time to upload dont worry will upload it today
syedrazaabbas said:
hi sorry for the late as i was out of town so i will convert and upload the system.ext4 soon as it is a big file it need some time to upload dont worry will upload it today
Click to expand...
Click to collapse
No need to be sorry. I understand you have a life outside of xda . I'm trying to be as patient as I can its just that I miss my phone
Cam Shaft08 said:
No need to be sorry. I understand you have a life outside of xda . I'm trying to be as patient as I can its just that I miss my phone
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=0BzQYyLb6zJczdDhQS2hyTXpMQ0E&usp=sharing
here you go
step 1 : Download all 14 parts according to order and put them into a new folder
step 2 : download winrar and install it if you already have skip it
step 3 : open part 1 in winrar and extract it , it will auto detect all 14 parts
finally you will have the file , it took me so many hours to upload the full file .
Cheers
syedrazaabbas said:
https://drive.google.com/folderview?id=0BzQYyLb6zJczdDhQS2hyTXpMQ0E&usp=sharing
here you go
step 1 : Download all 14 parts according to order and put them into a new folder
step 2 : download winrar and install it if you already have skip it
step 3 : open part 1 in winrar and extract it , it will auto detect all 14 parts
finally you will have the file , it took me so many hours to upload the full file .
Cheers
Click to expand...
Click to collapse
Awesome!!! THANK YOU!!!!!!!!!
syedrazaabbas said:
https://drive.google.com/folderview?id=0BzQYyLb6zJczdDhQS2hyTXpMQ0E&usp=sharing
here you go
step 1 : Download all 14 parts according to order and put them into a new folder
step 2 : download winrar and install it if you already have skip it
step 3 : open part 1 in winrar and extract it , it will auto detect all 14 parts
finally you will have the file , it took me so many hours to upload the full file .
Cheers
Click to expand...
Click to collapse
This is what I keep getting.
Cam Shaft08 said:
This is what I keep getting.
Click to expand...
Click to collapse
try to fresh your bootloader oi5
https://www.androidfilehost.com/?fid=24052804347851013
then after flashing this try the file again I hope it will help again
syedrazaabbas said:
try to fresh your bootloader oi5
https://www.androidfilehost.com/?fid=24052804347851013
then after flashing this try the file again I hope it will help again
Click to expand...
Click to collapse
It didn't work. Do you have any other suggestions or do you knew how to or can upload the kernel md5, modem md5, recovery md5, or can you do the full rom? Sorry to be such a pain but I just don't know what else to do. Ya know getting any help around is like pulling teeth.
Cam Shaft08 said:
It didn't work. Do you have any other suggestions or do you knew how to or can upload the kernel md5, modem md5, recovery md5, or can you do the full rom? Sorry to be such a pain but I just don't know what else to do. Ya know getting any help around is like pulling teeth.
Click to expand...
Click to collapse
hey syedrazaabbas im having the exact same problem. i flashed the files you kindly provided and same problem wont flash the system file. Im pretty compident with programs and phones so if there is a program i can use i will make a .tar.md5 oidin file myself if it is posible to do. thanks again, sorry i also searched and searched. it seems as if the att S5 section of XDA is a ghost town, i know it can be over whelming at times (i know im a mechanic and deal with my fair share) but i dont beleve in not helping if i have the means to do so.
Tom
hi everyone so i really need you help iv been using my note 5 for awhile now but now something is wrong with it i cant make calls or send text on it.. but if shows my carrier and everything and that i have service but at the same time i dont i dont know what to do to fix it iv cleared cache iv done factory reset and still nothing like again shows my carrier (Fido) in top corner and that i have bars but it will not make calls or send messages i put my sim in my other phone a LG G3 and works perfectly fine can someone please please help me
OMGDilts said:
hi everyone so i really need you help iv been using my note 5 for awhile now but now something is wrong with it i cant make calls or send text on it.. but if shows my carrier and everything and that i have service but at the same time i dont i dont know what to do to fix it iv cleared cache iv done factory reset and still nothing like again shows my carrier (Fido) in top corner and that i have bars but it will not make calls or send messages i put my sim in my other phone a LG G3 and works perfectly fine can someone please please help me
Click to expand...
Click to collapse
Try flashing just the radio which is inside of the firmware and you'll need to extract it. It's called modem.bin.. If that doesn't help at all you'll need to double check your APN settings.
MrMike2182 said:
Try flashing just the radio which is inside of the firmware and you'll need to extract it. It's called modem.bin.. If that doesn't help at all you'll need to double check your APN settings.
Click to expand...
Click to collapse
iv already tried the apn settings how do i do the other thing?
MrMike2182 said:
Try flashing just the radio which is inside of the firmware and you'll need to extract it. It's called modem.bin.. If that doesn't help at all you'll need to double check your APN settings.
Click to expand...
Click to collapse
i really dont wanna ruin or mess up my phone so wanna do it perfect
OMGDilts said:
i really dont wanna ruin or mess up my phone so wanna do it perfect
Click to expand...
Click to collapse
If your phone is rooted maybe flash stock modem for ur note 5 model or custom kernel or if not rooted not sure if u can use odin to flash modem or kernel
p3t3r7 said:
If your phone is rooted maybe flash stock modem for ur note 5 model or custom kernel or if not rooted not sure if u can use odin to flash modem or kernel
Click to expand...
Click to collapse
im not rooted
p3t3r7 said:
If your phone is rooted maybe flash stock modem for ur note 5 model or custom kernel or if not rooted not sure if u can use odin to flash modem or kernel
Click to expand...
Click to collapse
i should be able to still flash stuff tho
OMGDilts said:
i should be able to still flash stuff tho
Click to expand...
Click to collapse
Double check your APN settings first.
MrMike2182 said:
Double check your APN settings first.
Click to expand...
Click to collapse
i have multiply times
OMGDilts said:
i have multiply times
Click to expand...
Click to collapse
Also extracting the modem.bin isn't going to be doing anything wrong it's the same thing an entire firmware update would do except it's one file instead of flashing all the files and losing everything.. There's nothing wrong with flashing the files extracted separately.
MrMike2182 said:
Also extracting the modem.bin isn't going to be doing anything wrong it's the same thing an entire firmware update would do except it's one file instead of flashing all the files and losing everything.. There's nothing wrong with flashing the files extracted separately.
Click to expand...
Click to collapse
how can i get the latest one for my phone im with fido
OMGDilts said:
how can i get the latest one for my phone im with fido
Click to expand...
Click to collapse
Check updato.com it's got the fastest download speeds! Click firmware at the top and then enter your model e.g (SM-N920V) and look through them.
MrMike2182 said:
Check updato.com it's got the fastest download speeds! Click firmware at the top and then enter your model e.g (SM-N920V) and look through them.
Click to expand...
Click to collapse
my note 5 model is sm-n920w8
MrMike2182 said:
Check updato.com it's got the fastest download speeds! Click firmware at the top and then enter your model e.g (SM-N920V) and look through them.
Click to expand...
Click to collapse
also what am i exactly looking for to download
MrMike2182 said:
Check updato.com it's got the fastest download speeds! Click firmware at the top and then enter your model e.g (SM-N920V) and look through them.
Click to expand...
Click to collapse
i dont see anything about radios/modems or nothing just firware
OMGDilts said:
i dont see anything about radios/modems or nothing just firware
Click to expand...
Click to collapse
Basically what you look for is the ENTIRE firmware for SM-N920W8 and you download the entire file the whole entire 2GB and then after its finished you use an extraction application to extract it the FIRST time which will produce a .md5 file that's like 4GB in size or a little more inside this one is where all the files you need are so extract it ONE more time and then you'll see the entire list of files e.g boot.img recovery.img system.img sboot.bin modem.bin etc etc.. then you connect your phone in download mode and select the AP slot and navigate to the folder with all those extracted files in them and select just ONE which is the modem.bin and then flash it! Your phone should reboot and then check your APN settings once again just to be sure. If none of this works I guarantee you need to go get another sim card it's happened to me before it worked fine in my HTC 10 but refused to in my Note 5 only after getting a new sim card did it work. By the way I use 7zip for extracting files.
MrMike2182 said:
Basically what you look for is the ENTIRE firmware for SM-N920W8 and you download the entire file the whole entire 2GB and then after its finished you use an extraction application to extract it the FIRST time which will produce a .md5 file that's like 4GB in size or a little more inside this one is where all the files you need are so extract it ONE more time and then you'll see the entire list of files e.g boot.img recovery.img system.img sboot.bin modem.bin etc etc.. then you connect your phone in download mode and select the AP slot and navigate to the folder with all those extracted files in them and select just ONE which is the modem.bin and then flash it! Your phone should reboot and then check your APN settings once again just to be sure. If none of this works I guarantee you need to go get another sim card it's happened to me before it worked fine in my HTC 10 but refused to in my Note 5 only after getting a new sim card did it work. By the way I use 7zip for extracting files.
Click to expand...
Click to collapse
wont flash in ap and only let me flash in cp but when i try stops at file analysis
OMGDilts said:
wont flash in ap and only let me flash in cp but when i try stops at file analysis
Click to expand...
Click to collapse
After you extract the modem.bin then zip the file back up as a .zip file and then do it again using the AP slot.. Don't use CP that's not for this.