As suggested in the title, I cannot get the screenshot button combo to work. I press Home + Power to no avail. I've tried holding it for a second, 2, 3, 5, even 10 seconds - no dice. Out of desperation, I have tried every other combination of button presses. The palm-swipe works, but that is not always convenient. I have also disabled the palm-swipe and tried every button combo, no luck. Seems so newb, but this is bugging me out. Is there a setting somewhere to disable this, as that may have happened inadvertently? Hope someone can help! Thanks.
Home + power works for me. Try mashing power button a half second before home.
Related
Hi guys
I have been trawling this and other forums for 2 days now with no success. I cannot for the life of me get the phone into bootloader mode. I am currently using one of NRGZ28's Roms if that helps.
I have tried about 15 times to do it. Each time, powering off device, taking out and re-inserting battery, holding down volume down key as well as the power button, but the phone continually boots as per normal.
I've also re Hard-SPL'd thinking that was the issue, but apparently not.
Any pointers would be greatly appreciated!!! Thanks
Try this...
If your phone is already turned on, go to Start>Reset
While it's turning itself off, hold down the power button and the lower volume button simultaneously (at the same time) and CONTINUE TO HOLD! It should then go into bootloader.
Or take the battery out, re-insert it. Push the power button and lower volume button down at the same time and CONTINUE TO HOLD!
The important step is that you have to CONTINUE TO HOLD both buttons at the same time. Not just press them together and let go.
Hope that helps.
Every time I have been holding them the whole way through, even still holding once I hit the today screen just in case. Tried doing it your method through restarting while holding both, and the second method you suggested is the way I've been doing it each time. Taking out battery, re-inserting it, pressing both buttons at the same time and holding, but it just continues to boot as normal. I have recently had to take my phone apart due to the slide-out keyboard playing up and now some buttons are a tad hit and miss, but I have verified while the phone is on that both volume keys and the power button work as per normal
clintonius said:
Every time I have been holding them the whole way through, even still holding once I hit the today screen just in case. Tried doing it your method through restarting while holding both, and the second method you suggested is the way I've been doing it each time. Taking out battery, re-inserting it, pressing both buttons at the same time and holding, but it just continues to boot as normal. I have recently had to take my phone apart due to the slide-out keyboard playing up and now some buttons are a tad hit and miss, but I have verified while the phone is on that both volume keys and the power button work as per normal
Click to expand...
Click to collapse
if everything else fails try this app to enter bootloader
good luck
worked. very nice program! thanks a heap ay
clintonius said:
worked. very nice program! thanks a heap ay
Click to expand...
Click to collapse
glad I could be of assistance
I have an i9000 international, and I recently (attempted) to flash Darky's Rom 10 RC6, after flashing it in Odin, my phone started booting. All is fine until after 'S' logo screen. I've tried to get it into download mode frantically, but nothing is working. The 3 button press, not working. I've tried other methods, like removing the battery and plugging it into your computer, then volume buttons, but nothing...
Please help
Are you holding the Vol down + Home + Power buttons together long enough ?
Yeah, I've tried holding them down until the splash screen goes away. Just regularly boots, and then stop holding down power button when the splash screen is up. No luck. I think I might have to just jig it.
It can be tricky, in mine you first have to press home, then on+down, but in order that on goes before down...all other combinations at least in my I9000 won't work, and if it fails, remove the battery put back and try again.
SamBroomby said:
Yeah, I've tried holding them down until the splash screen goes away. Just regularly boots, and then stop holding down power button when the splash screen is up. No luck. I think I might have to just jig it.
Click to expand...
Click to collapse
You shouldn't even be seeing the splash screen.
What works for me everytime, is doing it in this order:
Press & hold down the vol-down button & home button, then (while still holding down those 2 buttons), press & hold the power button. You should be in Download mode in like 1 to 2 second. When you see the Download mode, let go of all 3 buttons.
I'm on AryaMod 5, my power button went out. I even took the phone apart and I push the button and it still work. But when I put it back together, the power button doesn't work. Is there any solution? Thanks for any suggestions or help.
For the most part, I haven't had any issues with my phone after lollipop. I'm liking the new features and the new pull down quick access buttons. For some reason though, when I boot into recovery mode, I can't seem to get the menu to pop up. I've tried every combination I can think off with the power button and volume buttons but nothing seems to work. Any ideas?
I've recently had to wipe the cache on my Turbo and the recovery mode does seem to have changed. With the phone powered off, hold the power button and volume down button until you get to the bootloader. Use the volume keys to navigate the menu and press the power button to select. Select recovery and you should see the Android icon laying down. Hold the power button FIRST for about two seconds and then tap the volume up button.
Yes, if you're wiping the cache it will take a long time. Do not freak out! :good: The ETA should be about 20+ minutes.
I've done it before on kitkat and know that it takes forever. The first time I did it though I was flipping out cause I thought it was deleting everything haha.
I did finally get it to come up using that method, and your right it has changed. You have to be really accurate when holding the power button and using the vol up arrow because I was trying that before and never could get it to come up.
Anyway thanks for the help.
After lolipop update it is reversed. Hold power button and tap on up volume... For sure
Sent from my XT1254 using Tapatalk
I am on stock ROM w/ 5.1.1
Holding the vol-down with the power button does nothing except show the volume control.
Is my Fire broken 0_o?
I get that unless I start pressing both at exact same time. Takes a couple seconds.