Hi, first i'd like to say sorry for my bad english, i'm from Argentina and I talk spanish. Well, I just flashed 4.4.2 to Moto X and everything went nice, with the Bootloader unlocked, the 4.4.4 OTA arrived, i click "upgrade" and the phone download the ROM, when i click on "install" the phone just die. Now it doesn't turns on, just a green led comes over when I plug it to the charger. I need help please....
Did you have low battery when you upgraded
aliyangohar4 said:
Did you have low battery when you upgraded
Click to expand...
Click to collapse
I was ugrading with 63% of battery
Try holding the power down and volume down buttons and see if that does anything
aliyangohar4 said:
Try holding the power down and volume down buttons and see if that does anything
Click to expand...
Click to collapse
No, it doesn't. Nothing happens.
connect device to pc and press windows+R and type devmgmt.msc and look for "QHSUSB_DLOAD"
miju12 said:
connect device to pc and press windows+R and type devmgmt.msc and look for "QHSUSB_DLOAD"
Click to expand...
Click to collapse
Nothing appears.
DaftAns said:
Nothing appears.
Click to expand...
Click to collapse
Do you have Motorola Device Manager on your PC? If not, install it.
With your phone plugged into the wall, press and hold the power button to see if you can get any response. If not, press and hold the volume down for about 3 seconds, then without releasing the volume down, press and hold the power button. Keep both buttons pressed together for about 3 seconds and release. If nothing happens, press volume up and see if you can get into bootloader mode.
Had you downgraded to 4.4.2 from 4.4.4?
If you can't get into bootloader mode, your only hope other than paying for a repair is this thread here:
http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
DaftAns said:
Nothing appears.
Click to expand...
Click to collapse
when you connect it to pc do you heard the connecting disconnecting sound? try pressing power button while connected to pc. you can also follow the thread given by @JulesJam
JulesJam said:
Do you have Motorola Device Manager on your PC? If not, install it.
With your phone plugged into the wall, press and hold the power button to see if you can get any response. If not, press and hold the volume down for about 3 seconds, then without releasing the volume down, press and hold the power button. Keep both buttons pressed together for about 3 seconds and release. If nothing happens, press volume up and see if you can get into bootloader mode.
Had you downgraded to 4.4.2 from 4.4.4?
If you can't get into bootloader mode, your only hope other than paying for a repair is this thread here:
http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Click to expand...
Click to collapse
I tried everything you said, and nothing works :c, checking the link that you gave me, thanks!
miju12 said:
when you connect it to pc do you heard the connecting disconnecting sound? try pressing power button while connected to pc. you can also follow the thread given by @JulesJam
Click to expand...
Click to collapse
Yes, when I connect it to my laptot the "connected-device" sounds, and after seven seconds, comes the "disconnected-device" sound.
JulesJam said:
Do you have Motorola Device Manager on your PC? If not, install it.
With your phone plugged into the wall, press and hold the power button to see if you can get any response. If not, press and hold the volume down for about 3 seconds, then without releasing the volume down, press and hold the power button. Keep both buttons pressed together for about 3 seconds and release. If nothing happens, press volume up and see if you can get into bootloader mode.
Had you downgraded to 4.4.2 from 4.4.4?
If you can't get into bootloader mode, your only hope other than paying for a repair is this thread here:
http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Click to expand...
Click to collapse
Hi, some of the download links in the URL you gave me are dead.
DaftAns said:
Hi, some of the download links in the URL you gave me are dead.
Click to expand...
Click to collapse
which ones?
DaftAns said:
Yes, when I connect it to my laptot the "connected-device" sounds, and after seven seconds, comes the "disconnected-device" sound.
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x/orig-development/bootloader-tool-motoflasher-t2959081. do check any changes in the device manager when your phone gets connected. Any exclamation mark in the device manager while you connect it under usb ports? try changing usb cable and pc and ports.
If it "died" right after you hit install and still connects to PC I doubt it's dead. Try pressing Volume Down and then Power Key, hold both for more than 2 Minutes (yes, more than 120 seconds!) then release both and see if it reboots (which it should if your problem is what I suspect) or you can turn it on again or enter bootloader.
Was the 4.4.2 you tried to upgrade to 4.4.4 modified in any way? SuperSU installed or any changes to system files?
miju12 said:
http://forum.xda-developers.com/moto-x/orig-development/bootloader-tool-motoflasher-t2959081. do check any changes in the device manager when your phone gets connected. Any exclamation mark in the device manager while you connect it under usb ports? try changing usb cable and pc and ports.
Click to expand...
Click to collapse
I can't see any changes in the device manager because 5 seconds after i plug in the phone, it "disconnects" so i have no time to check.
Hardmood said:
If it "died" right after you hit install and still connects to PC I doubt it's dead. Try pressing Volume Down and then Power Key, hold both for more than 2 Minutes (yes, more than 120 seconds!) then release both and see if it reboots (which it should if your problem is what I suspect) or you can turn it on again or enter bootloader.
Was the 4.4.2 you tried to upgrade to 4.4.4 modified in any way? SuperSU installed or any changes to system files?
Click to expand...
Click to collapse
No. It was a stock rom, with Usa retail i think
DaftAns said:
I can't see any changes in the device manager because 5 seconds after i plug in the phone, it "disconnects" so i have no time to check.
Click to expand...
Click to collapse
Open device manager than connect the device. Which os you are using?
miju12 said:
Open device manager than connect the device. Which os you are using?
Click to expand...
Click to collapse
Windows 8.1 Pro. But when I connect my phone de device manager seems to refresh all the device, then my phone disconnects.
DaftAns said:
Windows 8.1 Pro. But when I connect my phone de device manager seems to refresh all the device, then my phone disconnects.
Click to expand...
Click to collapse
i also get problems with windows 8.1 pro try windows 7 or xp
Related
so the other day i decided to root my phone it went all well i also installed CWM it also worked. so i also decided to install a custom rom i cant remember the rom since it was download to my phones memory. either way i delete everything cache dalvek etc.. after it installed through recovery menu it said it needed a reboot so i did, but when i rebooted it came to the sony logo. since then its been stuck in the sony logo until it runs out of battery i can't access anything it wont go pass that not even the recovery menu. i don't know what to do. ALSO MY COMPUTER WILL NOT DETECT WHEN I PLUG MY PHONE IN SO I CAN'T USE PCC, Flash tool or seus... any help?
killmehere said:
so the other day i decided to root my phone it went all well i also installed CWM it also worked. so i also decided to install a custom rom i cant remember the rom since it was download to my phones memory. either way i delete everything cache dalvek etc.. after it installed through recovery menu it said it needed a reboot so i did, but when i rebooted it came to the sony logo. since then its been stuck in the sony logo until it runs out of battery i can't access anything it wont go pass that not even the recovery menu. i don't know what to do. ALSO MY COMPUTER WILL NOT DETECT WHEN I PLUG MY PHONE IN SO I CAN'T USE PCC, Flash tool or seus... any help?
Click to expand...
Click to collapse
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Have you tried flash mode
Sent from my One X using XDA Premium 4 mobile app
it doesnt connect to the pc i cant do anything.
FaiselW said:
Have you tried flash mode
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i let it charge for a little and tried the volume up plus power buttom it vibrated but boot it back to sony screen.
Alex5699 said:
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Click to expand...
Click to collapse
killmehere said:
it doesnt vibrate when it turns on. also tried what you said but didnt work. THIS CASE IS RARE AND MAYBE CAN HAVE A SOLUTION. JUST NEED TO DIG IN.
Click to expand...
Click to collapse
I think what should be focused on first is getting juice back in that battery. Plug it in to the charger and let it sit for a few hours (like, at least 8 hours). It may boot loop but maybe it will still get some juice? (not sure about this..). Then you can try again to get into Flashmode. (Are you experienced in flashing stock FTF's with flashtool?)
no... i let it charge for a little and tried the volume up plus power buttom it vibrated but boot it back to sony screen.
LaZiODROID said:
I think what should be focused on first is getting juice back in that battery. Plug it in to the charger and let it sit for a few hours (like, at least 8 hours). It may boot loop but maybe it will still get some juice? (not sure about this..). Then you can try again to get into Flashmode. (Are you experienced in flashing stock FTF's with flashtool?)
Click to expand...
Click to collapse
By turning it on with VolUp+Power, what were you expecting to happen?
i am not sure. when i tried connecting it. it connects for 5 secs then disconnects.
LaZiODROID said:
By turning it on with VolUp+Power, what were you expecting to happen?
Click to expand...
Click to collapse
Alex5699 said:
im sorry to hear this bro .have u tried holding the volume up key plus the power key together wait for it to vibrate once keep holding it an it would vibrate 3 more times and power off ( this should be done while phone is on that stucked sony logo) . after it turn off then try connecting it with fastboot mode and see if that works " hold volume down then plug in usb "
Click to expand...
Click to collapse
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
killmehere said:
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
Click to expand...
Click to collapse
Go to the original post in this thread and click the Edit Post button. Then near the Save button should be a "Go Advanced" button. You can edit the thread title in there. Glad to hear it worked out for you.
killmehere said:
AT FIRST IT didn't work now it did thanks. how do i put it as solved?
Click to expand...
Click to collapse
sure, the very first post u made with your initial question, When you press edit, press on "go advanced and then u can change it up from there :good:
Hi guys. My phone suddenly turn off. im not able to turn it on again.
so i decided to use the hard reset using the back button however it doesn't work at all. So i decide to use the flashtool yet it doesnt work either.
When im trying to connect the phone using volume down + power button then plug in cable it doesn't work. it just virbrate 3 times.
any idea how to fix this?
You only have to push the volume down button and plug in the USB cable.
Don't press the power button!
Gamm86 said:
You only have to push the volume down button and plug in the USB cable.
Don't press the power button!
Click to expand...
Click to collapse
it doesn't work either it only vibrate 3 times
So you can't connect in flash mode, nor in fastboot mode?
Has flashtool worked in the past? If not or if this is the first time you use it, it could be due to missing or wrong drivers.
i used the flashtool before using flashmode however i never tried to use the fastboot.
Will google the tutorial regarding in fastboot and feedback as soon as possible
Press and hold the backside off button till 3 vibrations.
Then try to flash a stock rom with Flashtool. It must work. You can't brick a LBL-ed SP.
air001 said:
Press and hold the backside off button till 3 vibrations.
Then try to flash a stock rom with Flashtool. It must work. You can't brick a LBL-ed SP.
Click to expand...
Click to collapse
i tried that and hole for 10 seconds nothing happen
Where does it even boot up to.. And is there any light when you hold volume down and insert the cable. It Shld be green. There is no need to press the power button at all. Just volume down and plug I'm the cable. Make sure you have to drivers installed.
Fat_boy555 said:
Where does it even boot up to.. And is there any light when you hold volume down and insert the cable. It Shld be green. There is no need to press the power button at all. Just volume down and plug I'm the cable. Make sure you have to drivers installed.
Click to expand...
Click to collapse
i tried all the option that i know. Some people advise to bring it to the nearest sony service center. And also they said maybe the jtag is the last option.
Flashtool does not recognize my device
I can't access Fastboot or Flashmode.
When I press the power button nothing happens.
When I plug the phone into my computer or a wall outlet and hold the UP volume button the LED flashes red then turns blue. It stays blue.
When I plug the phone into my computer or a wall outlet and hold the DOWN volume button the LED flashes red then green then the LED turns off.
Any help is greatly appreciated.
drdoomed said:
Flashtool does not recognize my device
I can't access Fastboot or Flashmode.
When I press the power button nothing happens.
When I plug the phone into my computer or a wall outlet and hold the UP volume button the LED flashes red then turns blue. It stays blue.
When I plug the phone into my computer or a wall outlet and hold the DOWN volume button the LED flashes red then green then the LED turns off.
Any help is greatly appreciated.
Click to expand...
Click to collapse
It doesnt matter that flashtool doesnt recognize your phone
1- Download the firmware you want
2-Open flashtool
3-Press the flash icon
4-Select flashmode mode
5-Wait until it says to plug in your phone
6-Hold volume down and connect your phone
7-Wait until the proccess ends
8-Done
ExCuTioN said:
It doesnt matter that flashtool doesnt recognize your phone
1- Download the firmware you want
2-Open flashtool
3-Press the flash icon
4-Select flashmode mode
5-Wait until it says to plug in your phone
6-Hold volume down and connect your phone
7-Wait until the proccess ends
8-Done
Click to expand...
Click to collapse
When I get to step 6 nothing happens. it's like I can't get into Flashmode. It just repeats connect your device. No matter how many times I do it or how long I hold the button. It's not recognizing the device. PC companion doesnt recognize it either.
drdoomed said:
When I get to step 6 nothing happens. it's like I can't get into Flashmode. It just repeats connect your device. No matter how many times I do it or how long I hold the button. It's not recognizing the device. PC companion doesnt recognize it either.
Click to expand...
Click to collapse
you dont see the led flash red/green?
Did anything happend to the phone?Did it fell or did it get wet?
ExCuTioN said:
It doesnt matter that flashtool doesnt recognize your phone
1- Download the firmware you want
2-Open flashtool
3-Press the flash icon
4-Select flashmode mode
5-Wait until it says to plug in your phone
6-Hold volume down and connect your phone
7-Wait until the proccess ends
8-Done
Click to expand...
Click to collapse
ExCuTioN said:
you dont see the led flash red/green?
Did anything happend to the phone?Did it fell or did it get wet?
Click to expand...
Click to collapse
Yes. I broke the charger connector thing in the phone. I had it repaired and it was working. I honestly think the place that repaired it messed with the phone to get more money out of me.
They fixed it and when I took it, once it ran out of battery it started to do the same thing again. I cant figure out what it is.
drdoomed said:
Yes. I broke the charger connector thing in the phone. I had it repaired and it was working. I honestly think the place that repaired it messed with the phone to get more money out of me.
They fixed it and when I took it, once it ran out of battery it started to do the same thing again. I cant figure out what it is.
Click to expand...
Click to collapse
it seems that they didnt fix your phone at all. I suggest you go to a more reliable store or even if there is one near you to a sony repair store
drdoomed said:
Flashtool does not recognize my device
I can't access Fastboot or Flashmode.
...
When I plug the phone into my computer or a wall outlet and hold the UP volume button the LED flashes red then turns blue. It stays blue.
Click to expand...
Click to collapse
VOL UP (Blue LED) is fastboot. This is working . Thats a good thing.
1. Turn the Handy off
2. Press and hold VOL+UP
3. Connect the cable
4. Wait till the LED is blue and take your fingers from the phone
The display will indicates nothing in this mode.. It's normal.
Now you can Download TWRP Recovery for C6603.
Have you got an open bootloader.
which rom you wanted to install? stock? custom?
1. Download the boot-twrp-v2.img from (please take the right version for your phone):
http://forum.xda-developers.com/xpe...t/recovery-stable-twrp-2-4-3-0-touch-t21821122. Make your PC available for adb+fastboot:
http://www.android.gs/install-android-sdk-adb-windows/
&
http://www.chip.de/downloads/Minimal-ADB-and-Fastboot_62500183.html3. Go in folder with "fastboot.exe"
4. Press "Shift+Mouse-Right-Click"
5. "open command windows here"
6. C:\Flashtool\adb>fastboot.exe flash boot boot-twrp-v2.img
Go in Recovery and wipe/factory reset (or flash a new rom, ...)
Should work. Good Luck.
you could try to recover your os via Sony PC Companion
www.chip.de/downloads/Sony-PC-Companion_47336379.html
Xperience Z said:
VOL UP (Blue LED) is fastboot. This is working . Thats a good thing.
1. Turn the Handy off
2. Press and hold VOL+UP
3. Connect the cable
4. Wait till the LED is blue and take your fingers from the phone
The display will indicates nothing in this mode.. It's normal.
Now you can Download TWRP Recovery for C6603.
Have you got an open bootloader.
which rom you wanted to install? stock? custom?
1. Download the boot-twrp-v2.img from (please take the right version for your phone):
http://forum.xda-developers.com/xpe...t/recovery-stable-twrp-2-4-3-0-touch-t21821122. Make your PC available for adb+fastboot:
http://www.android.gs/install-android-sdk-adb-windows/
&
http://www.chip.de/downloads/Minimal-ADB-and-Fastboot_62500183.html3. Go in folder with "fastboot.exe"
4. Press "Shift+Mouse-Right-Click"
5. "open command windows here"
6. C:\Flashtool\adb>fastboot.exe flash boot boot-twrp-v2.img
Go in Recovery and wipe/factory reset (or flash a new rom, ...)
Should work. Good Luck.
you could try to recover your os via Sony PC Companion
www.chip.de/downloads/Sony-PC-Companion_47336379.html
Click to expand...
Click to collapse
your solution is not going to help because its a hardware problem and pc companion wont help since the phone wont even boot up
in a similar (or worse) problem :
was just using the phone when it hangs .. Instead being smart and patient, I tried to hard-reset it .. the screen goes dark, my android wear disconnect .. but then I literally got nothing ..
tried to put it to the cradle, connect the USB to computer, no lights, nothing
fastboot mode : volume up + connect USB, no lights, nothing
hold power button : no lights, nothing ..
the phone feels cold, so the procs seems to be sleeping ...
any ideas ?
ari197 said:
in a similar (or worse) problem :
was just using the phone when it hangs .. Instead being smart and patient, I tried to hard-reset it .. the screen goes dark, my android wear disconnect .. but then I literally got nothing ..
tried to put it to the cradle, connect the USB to computer, no lights, nothing
fastboot mode : volume up + connect USB, no lights, nothing
hold power button : no lights, nothing ..
the phone feels cold, so the procs seems to be sleeping ...
any ideas ?
Click to expand...
Click to collapse
believe me hard reset didnt do that. Either your battery died and now you need a new battery or you phone died and now you need a new phone
oem and usb debugging activated, but it don´t boot in Download Mode.
Power off, Power on+Bixby Button + Volume Down -- Hold them but it start not the Downloadmode.
Whats wrong?
Poweroff, hold volume down and bixby, then plug usb to computer.
Player04 said:
Poweroff, hold volume down and bixby, then plug usb to computer.
Click to expand...
Click to collapse
Thanks, that procedere have changed
I want to flash the ASE7 DBT with odin, without root, actually i have the ASE5 DTM. I hope it works and don´t tripping knox
Edit: Have do it. Works and don´t tripping knox
Really? Procedure changed? I just a firmware update on my s10+. It hasnt changed. You think it's user error?
Player04 said:
Really? Procedure changed? I just a firmware update on my s10+. It hasnt changed. You think it's user error?
Click to expand...
Click to collapse
Maybe he referring from older models like s8 s9 where it volume down, bixby, power.
This is s10 forum. Maybe he/she is lost.
Player04 said:
This is s10 forum. Maybe he/she is lost.
Click to expand...
Click to collapse
He has a s10 but didn't realize how to get to download mode because it different than from how it was on s9 etc.
When I got my s10e I had to read how to get it into download mode
When did the change in button routine to enter download mode change? I recently got my hands on an exynos s10+ and I found that the button routine change must have happened recently because all the guides on rooting still say to enter recovery/DL mode using [vol up - bixby - power].
How are you supposed to trigger recovery mode during root process now?
Any and all help is appreciated.
h8thisphone said:
When did the change in button routine to enter download mode change? I recently got my hands on an exynos s10+ and I found that the button routine change must have happened recently because all the guides on rooting still say to enter recovery/DL mode using [vol up - bixby - power].
How are you supposed to trigger recovery mode during root process now?
Any and all help is appreciated.
Click to expand...
Click to collapse
Turn off your phone. Press and hold the Bixby and Volume-down button, then connect with USB to your computer. (The cable shouldn't be connected until after you press the buttons).
Within seconds of USB connection the Download screen will appear.
Player04 said:
Poweroff, hold volume down and bixby, then plug usb to computer.
Click to expand...
Click to collapse
not working
kakrala17 said:
not working
Click to expand...
Click to collapse
if someone still has problems there is another way around... turn off your phone, hold volume UP (!) bixby and power button. you will enter recovery mode. in recovery mode you can reset to bootloader (download mode).
Player04 said:
Poweroff, hold volume down and bixby, then plug usb to computer.
Click to expand...
Click to collapse
Thank you so, so, so much. I though that was it for me and my phone.
I'm actually crying as a very important person to me got me this phone and I thought I had stuffed it.
Thank you again.
robbo1947 said:
Turn off your phone. Press and hold the Bixby and Volume-down button, then connect with USB to your computer. (The cable shouldn't be connected until after you press the buttons).
Within seconds of USB connection the Download screen will appear.
Click to expand...
Click to collapse
Just want to add this worked for me, I couldn't get into download mode using the usual method.
Holding Power & Volume Down beginning screen says Bootloader Unlocked Cannot Be trusted and then goes to Android Recovery. Tried to Factory Data reset several times, but keeps coming back to Bootloader Unlocked. I can not even tell if I am over charging or if it is charged at all. Can I get Samsung files from Samsung site to download? Which ones do you think would be best course. I just want it to be factory data reset. HELP! My recovery screen pics are attached.
NeedTablet said:
Holding Power & Volume Down beginning screen says Bootloader Unlocked Cannot Be trusted and then goes to Android Recovery. Tried to Factory Data reset several times, but keeps coming back to Bootloader Unlocked. I can not even tell if I am over charging or if it is charged at all. Can I get Samsung files from Samsung site to download? Which ones do you think would be best course. I just want it to be factory data reset. HELP! My recovery screen pics are attached.
Click to expand...
Click to collapse
Why are you holding vol down? Holding vol down and power is the method used to boot to recovery. And once the bootloader is unlocked you will always get the nag screen saying it is unsafe. Ignore it. What happens if you just push the power button WITHOUT pushing vol down?
lewmur said:
Why are you holding vol down? Holding vol down and power is the method used to boot to recovery. And once the bootloader is unlocked you will always get the nag screen saying it is unsafe. Ignore it. What happens if you just push the power button WITHOUT pushing vol down?
Click to expand...
Click to collapse
I thought that is what I said that I was holding Power & Volume down. I was holding them both.
NeedTablet said:
I thought that is what I said that I was holding Power & Volume down. I was holding them both.
Click to expand...
Click to collapse
I know that is what you said. I'm still asking why? You are complaining that that takes you to Android recovery but that is what that key combination is supposed to do.
lewmur said:
I know that is what you said. I'm still asking why? You are complaining that that takes you to Android recovery but that is what that key combination is supposed to do.
Click to expand...
Click to collapse
Oh Sorry, That is the only thing I can get to come up on tablet after Samsung Logo and Bootloader Unlocked. Then just blank screen. So I have trying to find ways to load OS/Firmware back on system since the factory data reset didn't work.
NeedTablet said:
Oh Sorry, That is the only thing I can get to come up on tablet after Samsung Logo and Bootloader Unlocked. Then just blank screen. So I have trying to find ways to load OS/Firmware back on system since the factory data reset didn't work.
Click to expand...
Click to collapse
Then you need to boot to download mode, not recovery. Plug the USB cable into a PC and not the tablet. Turn the tablet off. Then, while holding both vol down and vol up, plug the cable into the tablet. You can download the latest firmware using frija.exe. Flash the firmware using Odin on the PC.
lewmur said:
Then you need to boot to download mode, not recovery. Plug the USB cable into a PC and not the tablet. Turn the tablet off. Then, while holding both vol down and vol up, plug the cable into the tablet. You can download the latest firmware using frija.exe. Flash the firmware using Odin on the PC.
Click to expand...
Click to collapse
lewmur said:
Then you need to boot to download mode, not recovery. Plug the USB cable into a PC and not the tablet. Turn the tablet off. Then, while holding both vol down and vol up, plug the cable into the tablet. You can download the latest firmware using frija.exe. Flash the firmware using Odin on the PC.
Click to expand...
Click to collapse
I was able to successfully download the firmware and flashed it with odin. The only problem now is odin indicates PASS! in green on PC and seems to be finished, but the odin screen on PC has not closed. The tablet downloading screen remains open with the progress bar all the way at the end. Should I hit exit or reset on odin on PC or alternatively select AutoStart in options?
NeedTablet said:
I was able to successfully download the firmware and flashed it with odin. The only problem now is odin indicates PASS! in green on PC and seems to be finished, but the odin screen on PC has not closed. The tablet downloading screen remains open with the progress bar all the way at the end. Should I hit exit or reset on odin on PC or alternatively select AutoStart in options?
Click to expand...
Click to collapse
I don't know. The Odin screen remaining open is normal. But, unless you unchecked the auto-reboot in Odin options, the tablet should have rebooted when it finished flashing. If it doesn't, I guess the only thing you can do is manually reboot the tablet by holding vol down and power for about 7 seconds.
lewmur said:
I don't know. The Odin screen remaining open is normal. But, unless you unchecked the auto-reboot in Odin options, the tablet should have rebooted when it finished flashing. If it doesn't, I guess the only thing you can do is manually reboot the tablet by holding vol down and power for about 7 seconds.
Click to expand...
Click to collapse
I did uncheck the auto-reboot which the directions I had said to do so. So I just let it sit there for about 6-7 hours plugged into PC. I figured then there was no way it wasn't done installing so i unplugged from PC. After like 5 minutes or so the tablet came on with the beginning screen for setting up tablet. Now I just have to figure how much crap I really need on it. I wish I could get rid of Samsung Flow so I could use the tablet for Fan Duel. Thanks for your help. Have a good weekend.