Database Develop

Fixed my connectivity and battery life

Let me preface this by saying that after changing this setting and 20 hours later with multiple separations of phone and watch, I have yet to miss a notification and battery life is much much better. My specific problems were: Watch would randomly stop receiving notifications. I would realize this after a few hours go by without any notifications and pull my phone out and see what I've missed. This would happen despite the Wear app showing 'connected' status. Another issue I had was giving a voice command and after a few seconds the watch would return a 'disconnected'message, again the Wear app showed connected. All of this under known working network connections, whether Wi-Fi or cellular. I was also experiencing what I feel is short battery life at about 14 hours per day. I've had and used the watch for two weeks now and have restarted it many many times.
The following is the ONLY thing I have changed since the major improvement in performance. I don't have the depth of knowledge to prove or describe why this worked for me, and maybe it wasn't the cause, but I (knock wood) have a perfectly operating watch now with the battery life indicating about 2 days remaining at noon today.
Go to Settings> Bluetooth> and select the settings icon on your connected device. Then select 'connection access' and choose 'automatic'. Mine defaulted to 'always ask'.. I'm guessing this caused a hangup with the connection between Wear app and watch leading to my problems.
Edit: I'll add that my phone is an LG G2 on 4.4.2 , rooted and running xdabbeb's Rom.
Edit 2: I reset my watch, synced the watch via the Wear app on phone and NOT the Bluetooth screen and now I'm running strong after two days. Made sure automatic was checked as well.

Bugger
I don't have that option in my bluetooth settings

I don't have any problems with mine so far but just checked my settings and it was on always ask.
Could anyone confirm what it should be set as? I have changed mine to automatic anyways.
Thanks for the heads up.
Phil

Not seeing that option in Android 5.0.1 on my HTC One GE. But I have not been having any of the issues mentioned in the OP.
Sent from my Nexus 10 using Tapatalk

Here is a pic of the screen where you make selection. Always Ask is NOT what you want, which is what is pictured. Select Automatic. Sounds like this isn't available on Android 5.0 from what I see in responses so far.

I don't think I saw this option on any of the ROMs I ran, but there may be devices out there that have it and default to it, and this one would really break wear connectivity - so it may help someone someday.

I'm on 5.0, lg g3 and have both options.
Although i havnt had a problem with always ask and only switched it to automatic tonight.

Judging from the description, it will work as long as the watch stays connected, but a reconnect from the watch side would ask for confirmation (and could be possibly even silently denied under some circumstances).
Phone -> Watch = no problem
Watch -> Phone = problem
and it's possible (and likely) there are more connections going on than just the primary one, and if the connection is flaky there might be a dead one and a new one from either side...
you could just have been lucky, so far

My issues returned last night. I left my watch at home and went to dinner and out with friends, came back home after several hours. I left the watch in theater mode while I was out and over night. I woke up this morning, put watch on and realized the battery had tanked overnight and I was no longer receiving notifications, again, wear app showing connected. I looked at the battery graph for the watch and it is totally flat while I was out last night and appears to tank fast as soon as I got home and my phone was in proximity to the watch again. It's like it is constantly trying to handshake with the phone or something. The only thing that fixes this problem is a reboot of the Watch itself. I still think the connection setting was helpful because I have yet to see battery life like that or a solid link for that long. I would love to know what exactly is going on here. Bad hardware?

For the sake of comparison, I have android wear in my pull down bar saying 'connected, running sync loop' 100% of the time. It never goes away. Is this what everyone else sees?

That's what I have also since I own the watch.

Stbrightman said:
For the sake of comparison, I have android wear in my pull down bar saying 'connected, running sync loop' 100% of the time. It never goes away. Is this what everyone else sees?
Click to expand...
Click to collapse
That would be because you have Android Debugging turned on in the phone settings.. Means nothing..

mic18u said:
That would be because you have Android Debugging turned on in the phone settings.. Means nothing..
Click to expand...
Click to collapse
Nope, shows also when out of the box so without android debugging.
Just a normal operation notification

I just discovered another possible contributor to connectivity issues: I just tried to use my watch to voice dial and after multiple attempts I got the disconnected message. I took my phone out and Wear app says connected and I had full 4G signal. My phone is set with a pattern lock. After unlocking it and checking the above mentioned, I tried the watch again and it worked. Could locking your phone have something to do with these problems?

Did I get a bad watch? (Bluetooth range)

I just got a used g watch r from cowboom. It looks pretty much brand new but one thing I've noticed is that the Bluetooth range seems really short and spotty. For example right now I'm in my living room and the watch is in the kitchen on a table about 20 feet away with no walls and it's not connected. If I get back within 5 feet or so it will reconnect but it takes awhile. I also have a moto 360 and that thing will hold a connection all over the house. With the 360 I can be upstairs with the phone downstairs and it will stay connected. If I do manage to disconnect it connects very fast within range.
So is this normal for the g watch r or did I get a but device?

Think there might be something wrong. I can leave my phone at my desk at work and move up or down one floor and it will stay connected. If I leave my phone beside my bed, there's not a room in the house I can go in that it won't still be connected. It's rock solid. Sounds like there's something going on here...

trmiv said:
I just got a used g watch r from cowboom. It looks pretty much brand new but one thing I've noticed is that the Bluetooth range seems really short and spotty. For example right now I'm in my living room and the watch is in the kitchen on a table about 20 feet away with no walls and it's not connected. If I get back within 5 feet or so it will reconnect but it takes awhile. I also have a moto 360 and that thing will hold a connection all over the house. With the 360 I can be upstairs with the phone downstairs and it will stay connected. If I do manage to disconnect it connects very fast within range.
So is this normal for the g watch r or did I get a but device?
Click to expand...
Click to collapse
I have found that these watches are finicky. I have seen the watch disconnect from Bluetooth every 5 seconds and reconnect almost immediately afterwards. It's annoying as hell.
If I were you, I would perform the following steps:
1) In android wear - tell android wear app on your phone to forget the watch
2) Go into settings -> Applications -> Android Wear and clear data and clear the cache
3) Complete factory reset of the watch
4) reboot the watch and start Android Wear and re-pair
Also, I have found some custom ROMs do not play well with Android Wear, so if you have a custom ROM, you may want to try a different ROM.
Good luck.
Cheers,
B.D.

almost same issue for me: with my "old" gear 2 (tizen watch from samsung) i have a stable connection (voice calls working) through my whole flat, even if i'm downstairs it will maintain a stable connection.
since friday i own a g watch r, and it wont keep a stable connection for anything more then ~5m. if i'm in a different room >> no connection!
sounds like some g-watch-r have bluetooth problems?

Same here. The range is not the same as my Gear S. But the most frustrating thing is that when it disconnects, sometime it takes a few minutes to reconnect when in range or not at all!!! Were as the Gear S would connect imminently when it is in range again.

I have only had problems when there is an update, and it clears after a few minutes. I expect it needs to update the watch and do a hotboot or something. After the wear update yesterday it was maybe 5 minutes before I could do anything. Normally I don't have any problems disconnecting and I live in a really old stone house, up to 36 inch thick stone walls, cell signal in front of windows and 3 Wifi APs to get coverage. I think it may be a bad batch, or software glitch. if forgetting and reconnecting does not help try a factory reset, or call LG.

I'm still unsure if my watch is faulty or not - because the bluetooth range is really bad, especially compared with my Samsung Gear 2! I do not have a stable connection when I'm more then a few meters away... I did a reset of the watch and this changes nothing...

I've actually noticed a shorter BT range ever since the 5.1.1 update. Used to be able to walk around my relatively small apartment and stay connected on opposite sides, but now it'll often lose connection unless it's in a central area.

Losing Bluetooth Connection

I have a weird problem with my Moto X 2014 (Pure Edition). It's randomly losing bluetooth connection in a background (basically any BT connection – to auto, smartwatch, etc.) but the phone itself says everything is fine (Bluetooth is on and devices are connected). But actual connection is not working: unable to play music via BT, unable to discover a new BT device, notifications not coming through to a smartwatch, etc. Bluetooth devices continue to show as connected even if I power them off, and when I turn them back on, they won't reconnect.
I meet this problem every 1-2 hours, sometimes even 10-20 minutes. The only way to fix this problem - to turn off BT and then turn it on again. Or keep Wi-Fi always off.
I tried to use another Moto X (2014, same software build version), to pair and unpair devices, to clean cache and even do a factory reset (with and without backup restoring) – the problem is still here. That's weird but this problem start appears 2-3 weeks ago, before everything was just fine.
Phone: Moto X 2014 Pure Edition @ T-Mobile, Lollipop 5.1 (TMO_Pure_5.1_LPE23.32-21.3_5_23.16.3.victara_tmo.tmo.en.US)
Devices: Pebble Time, Pebble Time Steel, Ford SYNC2, Moto Stream.
Things I tried that didn't help: deleting and re-pairing devices, deleting all old device profiles, clearing cache, reflash, factory reset, safe mode, flash CM12.

BT HCI Logs:
A disconnect at 1:28pm
dropbox.com/s/q3pka5egagq3e5g/01_btsnoop_hci.log?dl=0
A disconnect at at 3:09pm (or so)
dropbox.com/s/f2kl4rowr12lypt/02_btsnoop_hci.log?dl=0

Same issue here with a VZW XT1096, since OTA to 5.1. Factory reset does not help.

Up

Same issue here, same device & carrier & software build version & Pebble Time Steel. As long as I'm constantly making use of a BT connection, it seems to stay alive just fine, but as soon as it sits idle for more than a couple minutes, the connection drops (according to the BT device, but not according to the phone). I've tried all the same things with the same total lack of success. I have nothing new/helpful to offer, but at least you're not suffering alone.

That's weird by the issue seems to be fixed somehow. Everything works just fine for almost 24 hours now, even with an active Wi-Fi.
Still testing.

Just to say I have the same problem with a Pebble Time Steel and my 2014 Moto X. Have e to disable BT and dependable BT to get phone to connect to Pebble to only be dropped a few minutes later from Pebble side.
Lyre

AlexanderKirov said:
That's weird by the issue seems to be fixed somehow. Everything works just fine for almost 24 hours now, even with an active Wi-Fi.
Still testing.
Click to expand...
Click to collapse
I'm having the same problems and have also had it "go away" for extended periods of time only to reappear after a day or two. Mine will drop the BT connection even if I'm actively listening to audio over my headset.

Registered because I'm having the same issue. I'm running stock 5.1, no root. The connection to my Pebble Time Steel is very unreliable. The Bluetooth settings thinks it's still connected, the Pebble Time app on my phone thinks it's still connected, but my watch shows no connection and there's no communication to or from my watch. Sometimes it'll work for hours just fine and then drop, sometimes it'll only be a few minutes. It seems to be when the phone screen is off. Turning BT off and on always fixes it, it'll immediately automatically reconnect and show it on the watch.
I've tried the Pebble troubleshooting online (factory reset & recovery mode on watch, uninstall Pebble Time app, forget pairing on all devices, remove all other BT apps, reboot phone, reinstall Pebble Time app, re-pair) but the problem remains.
In the past, I've had it where my Fitbit One seems to have dropped the connection. Since the sync is so infrequent, I don't notice it much but I did catch it where it hadn't synced in a few days. (That app was uninstalled while I try to figure the Pebble thing out)
Next step is factory reset on the phone, but it sounds like that's not a fix for some people. That, or design a watchface that sends a keep alive signal to the phone, which runs an app to reset the BT when the connection drops. Since it's still listed as connected, I don't think Tasker will fix it.

Same issue. My phone is a Verizon Moto X and I've tried factory reset. Hoping that whenever they update to 6 that it will fix the issue, but I'm ready to smash my Moto x over this

AlexanderKirov said:
That's weird by the issue seems to be fixed somehow. Everything works just fine for almost 24 hours now, even with an active Wi-Fi.
Still testing.
Click to expand...
Click to collapse
While I hope your problem is "fixed" I would not be too hopeful. I have had this problem as long as I've had the phone. Sometimes it goes away for a while but it always returns. Right after I unlocked my bootloader and it did a complete factory reset the problem went away for a week but it eventually returned. I've seen similar problems reported with all the MX14 variations and nobody seems to have a solution. There was a thread on the Moto forums with folks reporting these issues to Moto but nothing ever came of it. Seems to be connected to wifi somehow because I don't seem to drop the BT connection if wifi is turned off. Not really a useful solution but it does seem to work. I just gave up and put a BT toggle button on my homescreen.

I had the same problem using marshmallow, I downgraded to 5.1 and it went to normal

Count me in on this 'issue' too. 5.1 XT1096 rooted and BL unlocked. It seems to have started around mid-December and I can't think of any particular change that caused it. Pretty much have to toggle BT 2-3 times a day at this point. FWIW, I started having the problem before the BL unlock so basically factory reset did nothing to fix the issue.
Is there perhaps a way to have the BT automatically toggle at fixed intervals a couple of times a day?

jimbo0914 said:
Count me in on this 'issue' too. 5.1 XT1096 rooted and BL unlocked. It seems to have started around mid-December and I can't think of any particular change that caused it. Pretty much have to toggle BT 2-3 times a day at this point. FWIW, I started having the problem before the BL unlock so basically factory reset did nothing to fix the issue.
Is there perhaps a way to have the BT automatically toggle at fixed intervals a couple of times a day?
Click to expand...
Click to collapse
Update: I changed over to Android M on CM13 and no longer have this issue. Nice not to have to power toggle the BT function a couple times a day anymore.
YMMV

Met the same problem after updating to Android M.
I often connect to BT during driving and after a few days working normally, my headset will be disconnect without any "notification".
My solution is to wipe cache, after that BT connection will work well for another few days.
Never met this issue in Android L, but I just love M so much.
Looking for better solution / fix.

I found this thread while searching for some solution for my BT+Android Wear problems. I have them since circa february / march 2017.
But today, I got a problem with non-Wear watch (Fossil Q Grant). I noticed my phone was locked even if I have smart lock set up. I checked fossil q app, the watch was connected, it received notifications so far. But in the phone settings, in smart lock, all my devices vanished. I checked the BT setting and saw the same. All my paired devices disappeared! It happened after nothing more than a restart, after my fossil lost connection earlier today and did not want to reconnect. So I restarted the phone.
This happened to me the second time already, but first time I somehow did not pay attention because I was frustrated by the Wear app problems and weekly factory resets to get my Wear watches working.
Could our issues be related? Some bluetooth software bug in phone? THIS IS PURE HELL!
Moto X4 cant come soon enough.

Phone keeps forgetting Bluetooth pairs.

My Nexus 6 keeps forgetting my Bluetooth pairs. I'll wake up and notice that my pairs are gone. Which is an annoyance with my car and Android Wear watch. It happened once before but then when it happened last night I know there is an issue. It started after I upgraded to Marshmallow. I'm running the MRA58R build. Any ideas?

I have the same issue...ever since marshmallow...both 6.0.0 official and 6.0.1 official, both times before installs the phone was wiped...but never the less it always forgets my bluetooth pairs
it seems to correlate to when the phone fully dies. If the phone fully dies 1-2 out of 5 times it will boot back up without the bluetooth pairings.
Also if I don't pair my Wear watch(original 360) this does not seem to happen either

I'm having this issue as well. My phone will randomly ask to pair with my car, even though it's been paired already. And sometimes it will just ask me to allow it to share Messaging, which was also already set. It's frustrating. I've only noticed it with Marshmallow.
For me it doesn't seem to correlate with charge level.

Having the same problem here and now that you mention it, it does seem to happen when it fully dies. Until someone comes up with a solution I'm going to see about backing them up and restore if it happens again.

Allowing your phone to completely die is a bad idea. The sudden shut down is what is corrupting it.
Also restoring that type of system data is just asking for other random issues, also not a great idea.
While I run an AOSP based rom I have never had my device forget any of my 5 BT pairings.

I agree don't let phone die.
Also if low battery plays a role (before phone dies), it could be related to battery saver features that can activate at low batteries level. (Adjustable in settings)
For the android wear app, turn off battery optimization (to prevent it from being interrupted by doze. )
I have had zero disconnection between my n6 and my moto 360 g1 android wear watch in the last month.

I have the same problem with my car pairing. I never let the battery for or get into battery saver mode so it's definitely not battery related for me.

Blown 89 said:
I have the same problem with my car pairing. I never let the battery for or get into battery saver mode so it's definitely not battery related for me.
Click to expand...
Click to collapse
My phone has done this now twice in three days on N Preview 3. Has anyone found a solution?

mine does it too. but it will forget ALL my paired devices. it's pretty annoying

This is happening to me as well. Nexus 6 is forgetting all paired bluetooth devices.
Most annoying is the Android Wear issue because I've been having to factory reset the watch to get it to pair again. Some of this might be the watch because I'm running a Samsung Gear 2 with Android Wear but I also have several other devices that I have to repair every time.
Also seems to correlate with the battery dying.

There has to be a common bug. As all my devices have no issue remembering the pairing. Mind you I also dont pair to my car.
Also keep in mind that it was found long ago that OEM put in lists of cars that it will not work with in their roms. We found it on samsung devices years ago where it would block all connections to BMW, Audi and a few others.

N6 running 6.0.1 (no root)
This just started happening to me yesterday but has happened twice so far in two days. My phone has not died as seems to be a symptom for others here. It did get below 10% today but I charged it up without issue. it wasn't until several hours later that it wiped all of its paired devices. below is a list of my paired devices:
Samsung ATIV book 8 (windows 10)
UE Mobile BoomBox
Moto360 2nd Gen
2014 Infiniti Q50
2015 Nissan Murano
After it wiped everything yesterday I re-paired the following:
Samsung ATIV book 8
Infiniti Q50
Moto 360
After the first wipe today I paired the watch and the car.
If anyone has any ideas I would be grateful. This is a GIANT PIA!

Does not look like there is a solution to this forthcoming... is there anyone with this problem that's recently updated to N? And has it gone away? I get this usually after a forced reboot... all bt settings gone. Totally a problem.

Any update on this. I think it started happening after I updated to 7 and then went back to 6 after having battery issues?
rkshack

Giant PIA
Blown 89 said:
I have the same problem with my car pairing. I never let the battery for or get into battery saver mode so it's definitely not battery related for me.
Click to expand...
Click to collapse
I have this same problem too. Running Android 6.0.1 on a Samsung Galaxy A5. I drive a lot for work, and need my phone paired to a JVC headunit (listed as JVC UNIT on my phone) in my van so I can take phone calls handsfree, and listen to podcasts. Every now and again, maybe once a day, with no rhyme or reason that I can discern, I get into the van and notice that my phone is not paired. It's a pain to have to pull over and re-pair the phone, and then set it up a a trusted bluetooth device again (so as to avoid entering my passcode whenever unlocking the screen).
- Definitely nothing to do with battery levels. My phone is normally fully charged and plugged in to a charger.
- I don't lose all paired devices, as my UE Boom 2 (not often used) is still listed as a paired device, whereas the JVC UNIT drops off fairly often.
Please could someone sort this issue out! It sounds like quite a few people are experiencing it.
thanks,
Phil

Phil in NZ said:
I have this same problem too. Running Android 6.0.1 on a Samsung Galaxy A5.
Click to expand...
Click to collapse
Not likely to get sorted for your phone in this N6 thread. [emoji6]

I am on Android 11 and it still happens to me, my car pairing is being forgotten from time to time. Happens to any of you?

Switched from Huawei Watch 2 to LGWS - connections failing, battery abysmal

Searched and searched so posting here and will try in general thread in case it's not tied to the watch itself.
Background: IOS user for phone, have to - developer, had Apple Watch (hated it). Got myself a Huawei Watch 2 on a deal and loved everything about it except the useless bezel and tiny screen size. Seeing as I had a great experience, I started a hunt for an LGWS. Hunt because not a single store sold one and I'm in Chicago with LOTS of stores. So online we go. There too - few resellers. Finally found one. New. Manufacture date of May 2017.
The Watch 2 worked flawlessly as functions go. Sycn'd, stayed connected, battery life of full use (all functions on - obviously no LTE), brightness at 8, raise to view on, always on display on... end of the day going to bed around 10:30 still had 50% of battery left at worst! The only issue other than cosmetic that it had was WIFI would not connect so "automatically" so to speak. So when I sent a watchmaker face, I always had to go to settings, connectivity, wifi and wait until the SSID showed connected. Then all is fine. Transferred over and enjoyed.
So the LGWS shows up. I unpair the Watch 2, connect up the LGWS and love it. The display I expected, size is great for me and off to the races. Within an hour it went from 95% to 60%. I figured - setup blues. Ignore it. Let it fully bake and see what happens. Another hour later I'm at 30%... ok onto the charger we go. Did a full charge at 6pm, by 9pm it was flat.
LGWS background: GW 2.8 loaded, Watch 2 was still running 2.0. LGWS - cellular off, raise to view on, display brightness 4, wifi connected...
But here's what I noticed: on my phone, it consistently says disconnected - tap card to connect. I tried that about 20 times, no joy. Rebooted watch and phone... no joy. Reset watch, deleted app on phone and deleted Bluetooth pairing. Re-installed Wear app, re-paired watch, left all at stock settings except shut-off cellular and OK Google listening.
That last bit is the 6-9pm going totally flat.
So. Any ideas here? Things I see - 8 vs 2 OS... obviously IOS (I get it, but why did the Huawei work so well?) and there is nothing I can do about that. Don't know if I can downgrade to 2 to see if that makes a difference... if I do, will it self-update back to 8 when it gets a chance?
I really want to keep this watch - it's exactly what I wanted (short of strap change capability). I sure hope Google doesn't give up on Wear. As a Mac/IOS dev, I can easily say this is a superior platform for the user. Truly great stuff and I want it to improve and keep improving. The iWatch bigots are really missing out!
Thanks in advance for your tips.
Cheers!

Have you tried doing a reset?
When I got mine, it upgraded straight away so I thought "great", it's a clean watch, there can't be anything wrong with it.
Nope..
Apps didn't work.
Battery life was rubbish.
Did a reset when i got a new phone.
Apps worked without issue.
Battery takes me from 5am through to 9pm with 40% left at least, LTE is off but aod is on.

Yes - reset the watch to factory when I deleted the app, pairing etc - went totally to step 0 across the board, short of formatting over the phone itself. But I did one more reset after that last night and charged it all night. So far this morning (wrote most of my note locally last night, posted this morning) I'm holding up pretty well. Nothing running on the watch - bone stock with phone shut off and Ok Google off. 2.5 hours @ 91%. Fingers crossed that this was a fluke. But in my experience today is probably the fluke LOL.

wig said:
Searched and searched so posting here and will try in general thread in case it's not tied to the watch itself.
Background: IOS user for phone, have to - developer, had Apple Watch (hated it). Got myself a Huawei Watch 2 on a deal and loved everything about it except the useless bezel and tiny screen size. Seeing as I had a great experience, I started a hunt for an LGWS. Hunt because not a single store sold one and I'm in Chicago with LOTS of stores. So online we go. There too - few resellers. Finally found one. New. Manufacture date of May 2017.
The Watch 2 worked flawlessly as functions go. Sycn'd, stayed connected, battery life of full use (all functions on - obviously no LTE), brightness at 8, raise to view on, always on display on... end of the day going to bed around 10:30 still had 50% of battery left at worst! The only issue other than cosmetic that it had was WIFI would not connect so "automatically" so to speak. So when I sent a watchmaker face, I always had to go to settings, connectivity, wifi and wait until the SSID showed connected. Then all is fine. Transferred over and enjoyed.
So the LGWS shows up. I unpair the Watch 2, connect up the LGWS and love it. The display I expected, size is great for me and off to the races. Within an hour it went from 95% to 60%. I figured - setup blues. Ignore it. Let it fully bake and see what happens. Another hour later I'm at 30%... ok onto the charger we go. Did a full charge at 6pm, by 9pm it was flat.
LGWS background: GW 2.8 loaded, Watch 2 was still running 2.0. LGWS - cellular off, raise to view on, display brightness 4, wifi connected...
But here's what I noticed: on my phone, it consistently says disconnected - tap card to connect. I tried that about 20 times, no joy. Rebooted watch and phone... no joy. Reset watch, deleted app on phone and deleted Bluetooth pairing. Re-installed Wear app, re-paired watch, left all at stock settings except shut-off cellular and OK Google listening.
That last bit is the 6-9pm going totally flat.
So. Any ideas here? Things I see - 8 vs 2 OS... obviously IOS (I get it, but why did the Huawei work so well?) and there is nothing I can do about that. Don't know if I can downgrade to 2 to see if that makes a difference... if I do, will it self-update back to 8 when it gets a chance?
I really want to keep this watch - it's exactly what I wanted (short of strap change capability). I sure hope Google doesn't give up on Wear. As a Mac/IOS dev, I can easily say this is a superior platform for the user. Truly great stuff and I want it to improve and keep improving. The iWatch bigots are really missing out!
Thanks in advance for your tips.
Cheers!
Click to expand...
Click to collapse
Sorry to bump an old thread how is your usage the last few months? I'm confused between buying this and the huawei watch 2.
Thank you @wig
Sent from my Sony Xperia XZ1 using XDA Labs

No worries. The LGWS has been pretty decent. It seems to me that its bluetooth radio gets confused. For example, when I'm in my car, sometimes the watch disconnects or the car bluetooth disconnects. When I'm in my home office where the WIFI router is, the watch seems to disconnect as well. Beyond these weird edge cases, it stays connected and just works. The disconnecting isn't really bothering me as much as the fact that when it does, it tries to connect over WIFI and drains the battery pretty quickly. I've kind of learned to live with it and the hardware in this watch is better than the HW2. That being said, my experience with connectivity was much better with the HW2. Not sure how it's going now for those who have it. Android Wear has updated both the IOS app and the core OS and apps numerous times since I posted this. So for all I know, HW2 is doing the same thing these days. It does appear Google is trying.
As for the LGWS - go to ebay, find yourself a new one that's super cheap. I ended up getting mine for around $170 which made it a no brainer. One of these days I'll throw a SIM in it just to try it, but have bigger fish to fry at the moment.
Best of luck.
P.S. I just saw you have an android phone - so your mileage may vary and in fact will probably be MUCH better. I'm on iPhone which is 90% of the issue.

wig said:
No worries. The LGWS has been pretty decent. It seems to me that its bluetooth radio gets confused. For example, when I'm in my car, sometimes the watch disconnects or the car bluetooth disconnects. When I'm in my home office where the WIFI router is, the watch seems to disconnect as well. Beyond these weird edge cases, it stays connected and just works. The disconnecting isn't really bothering me as much as the fact that when it does, it tries to connect over WIFI and drains the battery pretty quickly. I've kind of learned to live with it and the hardware in this watch is better than the HW2. That being said, my experience with connectivity was much better with the HW2. Not sure how it's going now for those who have it. Android Wear has updated both the IOS app and the core OS and apps numerous times since I posted this. So for all I know, HW2 is doing the same thing these days. It does appear Google is trying.
As for the LGWS - go to ebay, find yourself a new one that's super cheap. I ended up getting mine for around $170 which made it a no brainer. One of these days I'll throw a SIM in it just to try it, but have bigger fish to fry at the moment.
Best of luck.
P.S. I just saw you have an android phone - so your mileage may vary and in fact will probably be MUCH better. I'm on iPhone which is 90% of the issue.
Click to expand...
Click to collapse
Thank you so much for your reply I think you have sold me the watch. Now I can continue my search to try and find one. Seems at $170 that's definitely a bargain let me know if your wanting to sell ?
Sent from my Sony Xperia XZ1 using XDA Labs