[Q] Need Help for Flash A Flashable Zip File - Xperia Z1 Q&A, Help & Troubleshooting

Hi Everyone!
1st of all sorry for my english
2nd Please help me!
I have Xperia Z1 with .270 Lollipop my Bootloader is locked.
Flash tool Saying that cannot officially Unlocked!
I wana Flash a Flashable Zip file from my PC (not from SD Card) how can i do that while my bootloader is locked i have no SD Card
I have also tried the Desktop Flasher but i got error "Failed to Push Script"
Is there any possible way to Flash the Pre Rooted ROM Flashable Zip (Which i have created using PRF Creator) via Flash Tool or other then Flash tool but Easy Way because im new in this
Waiting for your Response !!!!!!!

wajeeh.ihi said:
Hi Everyone!
1st of all sorry for my english
2nd Please help me!
I have Xperia Z1 with .270 Lollipop my Bootloader is locked.
Flash tool Saying that cannot officially Unlocked!
I wana Flash a Flashable Zip file from my PC (not from SD Card) how can i do that while my bootloader is locked i have no SD Card
I have also tried the Desktop Flasher but i got error "Failed to Push Script"
Is there any possible way to Flash the Pre Rooted ROM Flashable Zip (Which i have created using PRF Creator) via Flash Tool or other then Flash tool but Easy Way because im new in this
Waiting for your Response !!!!!!!
Click to expand...
Click to collapse
First flash stock .108 firmware then root and install recovery in it
Turn on phone and copy flashable zip Created by prf creater in internal storage
Now boot into recovery twrp (you may use ndr utility app)
Wipe-> advance wipe->select dalvic catch, cache,system and data and move slider
Now back to main screen and navigate through internal storage and select flashable zip and flash it..
Done..!!

Root Issue
kathanpatel1001 said:
First flash stock .108 firmware then root and install recovery in it
Turn on phone and copy flashable zip Created by prf creater in internal storage
Now boot into recovery twrp (you may use ndr utility app)
Wipe-> advance wipe->select dalvic catch, cache,system and data and move slider
Now back to main screen and navigate through internal storage and select flashable zip and flash it..
Done..!!
Click to expand...
Click to collapse
Buddy having trouble in Rooting my device kingdo root says that root success but flash tool saying root denied.
last time i was successfully rooted my phone via flash tool by only flashing a 108 kernel but now i have installed .108 but no root. help me !!!!.

Thanks
kathanpatel1001 said:
First flash stock .108 firmware then root and install recovery in it
Turn on phone and copy flashable zip Created by prf creater in internal storage
Now boot into recovery twrp (you may use ndr utility app)
Wipe-> advance wipe->select dalvic catch, cache,system and data and move slider
Now back to main screen and navigate through internal storage and select flashable zip and flash it..
Done..!!
Click to expand...
Click to collapse
Thanks Buddy!!!!
Because of you i finally got lillpop Pre rooted now i can use Xposed and Many more features thanks again!!!!!

wajeeh.ihi said:
Thanks Buddy!!!!
Because of you i finally got lillpop Pre rooted now i can use Xposed and Many more features thanks again!!!!!
Click to expand...
Click to collapse
Awesome... ?

Related

[Q] [CWM Manager][Help needed][Flash Stock firmware option]

CWM Manager has the ability to flash firmware parts either from separate files (zImage, factoryfs.img, etc) or from .tar / .tar.md5 files that they usually come packaged in.
- Download the firmware you want to flash
- If you have a ZIP or RAR file, extract it until you have seperate files, or .tar / .tar.md5 files
- Create a folder named 'firmware' on your external SD card
- Copy the files you want to flash to this folder ( /sdcard/external_sd/firmware ). factoryfs ("system") is mandatory part at the moment.
- TIP: If you are flashing a new firmware that already has a CF-Root kernel available, put it in the 'firmware' folder as well in zImage or .tar form (NOT .zip). Select it when asked which kernel to use, then use the "Flash normally" option later on.
- Open the CWM Manager app
- Select "Flash stock firmware"
Click to expand...
Click to collapse
Is what im following. I have the RocketRom files extracted into the internal SD card /external_sd/firmware folder and one on the external SD card with the folder firmware. The rocketRom zip had META-INF - system - modem.bin - zImage. But when i click on Flash stock firmware it says it cant find anything. Did i do something wrong? Or actually im not sure what im doing wrong.
Thanks for any help!
Renren1403 said:
Is what im following. I have the RocketRom files extracted into the internal SD card /external_sd/firmware folder and one on the external SD card with the folder firmware. The rocketRom zip had META-INF - system - modem.bin - zImage. But when i click on Flash stock firmware it says it cant find anything. Did i do something wrong? Or actually im not sure what im doing wrong.
Thanks for any help!
Click to expand...
Click to collapse
Stock firmware is always .tar files, Rocket ROM is .zip file..
Put the whole Rocket ROM .zip folder in your sd card (do not unzip it), open Mobile Odin and choose flash update zip and then choose RocketRom.zip
EDIT: or you can just put the zip in your sd card, reboot into recovery, choose install zip from sd card and then reboot system
Thanks i tried that. But when it rebooted everything looked the same. Is that what the rocketrom looks like?
matius44 said:
Stock firmware is always .tar files, Rocket ROM is .zip file..
Put the whole Rocket ROM .zip folder in your sd card (do not unzip it), open Mobile Odin and choose flash update zip and then choose RocketRom.zip
EDIT: or you can just put the zip in your sd card, reboot into recovery, choose install zip from sd card and then reboot system
Click to expand...
Click to collapse
but if i use recovery wont it increase my counter?
Renren1403 said:
but if i use recovery wont it increase my counter?
Click to expand...
Click to collapse
No, recovery and mobile odin will not increase your flash counter
Flash counter will increase only if you flash custom firmware using PC Odin
Renren1403 said:
Thanks i tried that. But when it rebooted everything looked the same. Is that what the rocketrom looks like?
Click to expand...
Click to collapse
Rocket ROM is stock-like custom ROM so yes it will look the same
Go to Settings > about phone and check
Thank you so much for your help.. The official CF posts for flashing ROMs are so confusing and such. Thanks for clearing it out for me +1
matius44 said:
Rocket ROM is stock-like custom ROM so yes it will look the same
Go to Settings > about phone and check
Click to expand...
Click to collapse
I just did it via recovery mode, the animation starts then goes to a black screen. Is it rebuilding its cache?
Renren1403 said:
I just did it via recovery mode, the animation starts then goes to a black screen. Is it rebuilding its cache?
Click to expand...
Click to collapse
Did the flash went successfully?
Try to reboot couple of times, that might help..
If not, reboot to recovery, do cache and dalvik wipe..
If not, try to reboot into recovery and do factory reset/data wipe/cache/dalvik wipe and reboot..you will lose your data this way
matius44 said:
Did the flash went successfully?
Try to reboot couple of times, that might help..
If not, reboot to recovery, do cache and dalvik wipe..
If not, try to reboot into recovery and do factory reset/data wipe/cache/dalvik wipe and reboot..you will lose your data this way
Click to expand...
Click to collapse
It didnt say any errors when installing so it shouldve of went fine.
Im doing a cache wipe. and it just went to a black screen after "calling all speed demons"
Ill doo a factory wipe then and get back to you. Thanks for your help so far!
I re did the whole process this time. And it still goes black after "calling all speed demons". Should i wait during this time? In the s2 forums i read about it going like this because it is building cache or something along those lines.
I judt reread the whole RM thread. I didnt read the "flash 22 first" bit. Ill do that and hope it works that time ><!

[Q] Required complete guide for root/bootloader/cwm installation

Hi,
i have searched around but couldn't find a complete guide to install cwm, update boot-loader before installing any custom rom on LG SU-660. Can someone guide me?
My current BB:1035.21_20111120
Software version:LG-SU660-V20j
monemhamid said:
Hi,
i have searched around but couldn't find a complete guide to install cwm, update boot-loader before installing any custom rom on LG SU-660. Can someone guide me?
My current BB:1035.21_20111120
Software version:LG-SU660-V20j
Click to expand...
Click to collapse
Maybe this can help you out:
djtreo said:
here's what I did (thanks to those fellows who helped me) From stock ICS going to JB (with the old bootloader)
1. re-flash your phone using smartflash cleaner: http://forum.xda-developers.com/show....php?t=1987772 (backup first)
2. If flashing successful, you're into the Gingerbread bootloader. Power ON your phone, in CWM recovery, go to Mount USB, connect phone to PC using usb cable. It'll ask you to format, just press Yes. Internal storage will be formatted.
3. Download ROM (Raum's CM10.1): http://d-h.st/O6P -> this is what I called my base install...after download, rename it to cm-10-20130106-NIGHTLY-p990.zip
4. Download the file here: http://code.google.com/p/openstar2x/...=label:SU660 -> look for the 15A version.
5. Unzip the file 15a. Copy cm-10-20130106-NIGHTLY-p990.zip into 15a folder. Run fixall.bat. If ask what kernel, select option 4. If ask change wireless.ko, type Y. wait until finished. (Y because I got issues with wifi, bluetooth and calls with the stock wireless.ko)
6. Reboot your phone. Back to CWM recovery, again, go to Mount USB, copy cm-10-20130106-NIGHTLY-p990.zip in which it was converted to cm-10-20130106-NIGHTLY-su660-fixed.zip to your internal storage. After copy, install zip file from internal storage, select cm-10-20130106-NIGHTLY-su660-fixed.zip.
7. Should work flawlessly. After that, you can download official CM10.1 nightly, just rename it (same as step 3). You can also download custom kernel for CM10.1 here: http://upfile.vn/4J7n ...flash it after flashing the rom.
8. Enjoy!
hope this helps
Click to expand...
Click to collapse

problems with rooting my phone

i used this guide:
http://yagyagaire.blogspot.co.il/2011/08/how-to-root-samsung-galaxy-popmini.html#.UVQo5Bcqzj4
but i read in the comments that i can use the zip only with stock recovery.. and i have CWM recovery.
i tried to get back to stock recovery, but failed.
anyway to root with CWM?
thanks
Here's another way to root your phone. First,download the latest version of superuser in a flashable zip(google 'superuser downloads'). Then place the zip in your phone's sd card. Go to cwm recovery and select 'install zip from sd card'. Before this you might want to back up your rom,just in case something goes wrong. After that go to choose zip from external sd card and find the zip. Install the zip and when installation finished reboot. Your phone will be rooted after doing this.
try to go to galaxy mini themes n apps thread,and search best roots apps,thread by the alchemist...
#sorry for my bad english
just press thanks if i help u <
loldroid23 said:
Here's another way to root your phone. First,download the latest version of superuser in a flashable zip(google 'superuser downloads'). Then place the zip in your phone's sd card. Go to cwm recovery and select 'install zip from sd card'. Before this you might want to back up your rom,just in case something goes wrong. After that go to choose zip from external sd card and find the zip. Install the zip and when installation finished reboot. Your phone will be rooted after doing this.
Click to expand...
Click to collapse
thanks, but it didnt work..
use unlock root app
hey i use unlockroot app in windows pc to root my device ... i willl prefer to use atleast once
Try flashing a custom rom in your phone They usually comes up with a super user access (it means that you are rooted )
[ROM][CM7.2][ODEXED][30-04-2013] New Experience v9.8.0 - xda-developers
http://forum.xda-developers.com/showthread.php?t=1648213
This rom also comes up with many scripts/tweaks!
This is the one that I'm using
Im not saying its the best, there are many roms that have different features !
Please press thanks if I helped!:victory:

How to flash OTA Zip manually?

How can i flash a OTA Zip manually?
I tried it with CWM but get the eror Message "/system/build.prop": No such file or directory
no way Jose!
the OTA Zip is ONLY for the normal recovery.. not work in Custom recovery like CWM or TWRP ...
flash a stock ROM to works..
greetings..
:good:
mario93 said:
How can i flash a OTA Zip manually?
I tried it with CWM but get the eror Message "/system/build.prop": No such file or directory
Click to expand...
Click to collapse
You must do it from a clean system without root (in theory) and the recovery of stock
so you must prepares a clean install with RSD lite and from there you have the zip ota, you must place it on the external SD and reboot into bootloader mode and choose to enter recovery, once in the recovery you must install zip from external sd
ota file has specific restrictions in origin (compilation of your operating system) to destination are upgrading so ota files will verify that you are in the point of origin of the operating system for which it was designed that update.
see here one example
http://forum.xda-developers.com/razr-i/general/kk-brazil-retail-tested-t2917886

What I do?

I was on Oreo then I go to twrp make clean wipe
Then I flashed stock recovery but I forgot rename rom to update.zip ...how I can install ROM on my device pls help me.
How I can access my phone's internal storage .
1st Alternative : You can just reflash TWRP from fastboot and rename using TWRP's file manager. Then you can re-flash stock recovery from twrp itself.
2nd Alternative: If you have access to ADB in recovery, try this ADB file manager utility:
http://motyczko.pl/qtadb/QtADB_0.8.1_windows.zip

Categories

Resources