[26/08][KERNEL][3.10.87][NEW THERMAL CONFIG]RAZORREBORN� V2.0r2[UBER][UNIVERSAL][KCAL
ENJOY RAZOR SHARP OPTIMIZATIONS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.[/LEFT]
*/
FANPAGE (FACEBOOK ) : https://www.facebook.com/razorreborn
Features :
Built on new cyanogensources.. yep with bugs fixed.. latest sources.. better stability
LEDFIX inbuit.. thanks to black.Dragon74
Better battery management.. Respect HMP.. Better Conservative . tweaked little
Use all cores for booting
TCP added,Custom IOSCHEDULERS ADDED
ALUCARD Gov Added..
Custom governors include ALUCARD, ELEMENTALX, DARKNESS, IMPULSE, YANKACTIVE
Custom Hotplugs Include ALUCARD,BRICKED and THUNDERPLUG,INTELLIPLUG
Dynamic Fsync.. thanks to Varun Chitre
KCAL drivers added..
Powersuspend..
disabled KSM
VIbrator Intensity Control
Charging Current Control upto 1.5A.. users can select..(Thanks to Varun Chitre)
disabled crc Check upto 30% performance improvement
misc tweaks,Stability tweaks
Little tweaks with sampling rates and scaling..
-ofast optimisation
Thermal Throttle temp control from userspace .. Thanks @franciscofranco
Bumped Kernel version to 3.10.54
default VFC pressure Decreased..
More Zram Devices
Compiled Using Latest Toolchain.. UBERTC6.0 based on gcc6.0
Fix high load average from uninterruptible waits
-ofast optimizations
Booting on BLISSPOP..
CHANGELOG
* Update v2.0r2
Updated new Thermal Config... Thanks to @vishalraj08
* Update v2.0
Updated to 3.10.87 ( THANKS TO neobuddy89)
FiX Notification Leds
Default settings.. not necessary to tune
bring back color enhancement..
Many Fixes...
* Update v1.8
Add Governors:-
Adaptive
dancedance
despair
hellsactive
intelliactive
lionheart
nightmare
wheatly
zzmoove
barryAllen
SmartMax
BioShock
Pegasusq
Live Display Driver
Add Driver for FiiO USB DAC
Supports MIUI
* Update v1.6
Undervolt Cpu
Synced with latest CM source
Updated Prima Drivers
Added Adreno Idler
Added Quickwake drivers
Change SElinux to Permissive
android: drivers: workaround debugfs race in binder
Disable some debugs.. and Enabled Diag..
* Update v1.4
Fix frequency Scaling issue
Synced with latest tree.. commits till today.
Change Compiler and use many optimizations
Added Hyper and Blu Active governor
ipv6: Don't reduce hop limit for an interface
sync: don't block the flusher thread waiting on IO
SelinUX fIX... Change to Enforcing...
Working on Bliss, Exodus and almost all roms...
* Update v1.3
Merged with latest source...
solved booting problem with many roms..
-ofast optimizations for better zram and performance
Faster and bettery battery backup.. and tweaks..
* Update v1.2
Fix frequency Scaling issue in some governors
Added latest commits from Cyanogenmod
No issue with keyboard.. high sensitivity..
Added more Hotplugs - AutoSMP , Zen Decision , MAKO
Tweaked Yankactive
Disabled all hotplugs by default.. now only Thunderplug will be enabled by default
Bumped Kernel Version
Added Zen IOscheduler
*Initial Release
KERNEL PREFERED APP :- KERNEL AUDITOR
CREDITS
kairi_zeroblade
Varun Chitre
AudioGod
RaZorReborn Testers(amit,ajai,nijendra,devan,jeevan,mayflower,niranjan,parag,paras,zerocool,nikil)
DOWNLOAD LINK
Build V2.0r2
DOWNLOAD LINK AUGUST 26TH V2.0r2
UBER BUILD - https://www.androidfilehost.com/?fid=24052804347801084
Build V2.0
DOWNLOAD LINK AUGUST 25TH V2.0
UBER BUILD - https://www.androidfilehost.com/?fid=24052804347800751
OLDER BUILDS
Build V1.8
DOWNLOAD LINK AUGUST 15TH V1.8
UBER BUILD - https://db.tt/rTyOrctU
SABER BUILD - https://db.tt/ch0TNoEl
Build V1.6
DOWNLOAD LINK AUGUST 10TH V1.6 - https://db.tt/h0YxwpPH
MIRROR :- https://www.mirrorcreator.com/files/CVDCX2DB/RRV1.6TOMATO-2015-08-10(08.53PM).zip_links
FORUM CROSS LINKS
[64 bit][26/07][KERNEL][LP] RazorReborn v2 [SABER][UNIVERSAL][KCAL][1.25A][-o2] - XDA
RECOMMENDED SETTINGS
Hotplug :Thunderplug
INTERVAL : 550 ms
GOVERNOR : Darkness
CPU FREQ : 200-1651 MHz
IOSCHEDULER : bfq
TCP : bic
XDA:DevDB Information
[64 bit][05/07][KERNEL][LP] RazorReborn [UBERTC6][OC1.65][KCAL][1.25A][Max SOT], Kernel for the YU Yureka
Contributors
Kiran Anto
Source Code: https://github.com/kirananto/RAZOR
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: RazorReborn v2.0r2
Stable Release Date: 2015-07-26
Beta Release Date: 2015-06-07
Created 2015-06-07
Last Updated 2015-08-28
Reserved 1
Reserved 2
Thanks for the new Kernel mate. Before flashing, I'd like to know if it works for both 5.0.2 and 5.1.1. And what ROMs have you already tried it on? Not that I won't try it otherwise, but it's better to start with caution right?
Kiran Anto said:
....TeamYureka(Mallu group)....
Click to expand...
Click to collapse
where? on xda? or, fb? or, wa?
like it. installed on bliss rom latest rom.
quick notes
- mobile reboots often while running antutu,
- screen is breathing in dark(periodic black lock screen coming), could be bliss rom as well.
- For Thermal both core control and temperature throttle is selected by default, not sure if it's a problem, but kernel auditor suggests to select only one of them.
only bug i see here is antutu reboots..
thats probably due to overclocking.. and yurekas thermal design is poor.. so it cant work on oc 1.6Ghz for more than a minute..
i do not favour the idea of overclocking.. especially yureka.. even with its 1.47Ghz.. the phone is burning hot... so what happens at 1.6 is what all of you can guess,. but with a good governor you can make use of it easily.....
I hope you know that your's is the only kernel that works right now with the new 5.1.1 roms. Thanks.
Thread Got Updated guys .,
i was thinkng why no one noticed it....
so here is a ping
Kiran Anto said:
Thread Got Updated guys ....
Click to expand...
Click to collapse
how? download link is still fetching v1.1 battery edition dt. 11/06.
Dude Check Bottom... i mean .. the changelog for new download link
Kiran Anto said:
...Check Bottom... i mean .. the changelog for new download link
Click to expand...
Click to collapse
:laugh: this?
XDAevDB Information
[64 bit][21/06][KERNEL][LP] RazorKernel v1.2 [SABERMOD][OC1.6][LED][BRICKED][MAX SOT], Kernel for the YU Yureka......
...................................
...................................
......Last Updated 2015-06-22
Click to expand...
Click to collapse
i see no clickable links.
ooh sorry .. forgot to update the thread. here it is..
thread updated. check op
THANKS
thanks for great kernel bro
Vicky049 said:
thanks for great kernel bro
Click to expand...
Click to collapse
you are always welcome...
Love it. Using since 1 day. No issues.
However with hot plug on by default and with interactive governor I don't see cpu cores going offline ever. Should it not ghi offline? But again no complaints with battery backup. Thanks.
And yes, antutu runs just fine with almost 37700 score. Thanks.
Wi-fi issue
wi-fi doesn't turn on after installing this kernel.
Using official 5.0
munna_jast said:
wi-fi doesn't turn on after installing this kernel.
Using official 5.0
Click to expand...
Click to collapse
abeyhere said:
Love it. Using since 1 day. No issues.
However with hot plug on by default and with interactive governor I don't see cpu cores going offline ever. Should it not ghi offline? But again no complaints with battery backup. Thanks.
And yes, antutu runs just fine with almost 37700 score. Thanks.
Click to expand...
Click to collapse
Vicky049 said:
thanks for great kernel bro
Click to expand...
Click to collapse
Guys Thread Updated.. check op for more info
exciting part is its working with blisspop..
compiled using latest ubertc6.0
So far so good. Well I have reverted back to stock cms 5.0 so don't know if it works in newer roms. However working solid on 5.0. Alucard hotplug is new in market. . Sticking to it for a while. Stable.
Have been using it for a day without any issues. Speed is also good. On official 12.0S. @Kiran Anto, you removed the zzzmove governor. It had lots and lots of options. Do you want to put it back?
Related
ATTACKED-KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING THIS KERNEL WORKS IN STOCK LOLLIPOP 5.0.2 ONLY
Hi all, im not a DEV, so please go easy on me, im still learning...
This kernel works in STOCK LOLLIPOP 5.0.2 Roms... DOESNT WORK CM / AOSP BASED ROMs !!
The main goal is to have a stable and optimized Kernel, with usefull features ...
The features Are :
Compiled Using Linaro 4.9.3 Cortex A7 Optimized
Reclaimed RAM from loggers
Added Power Suspend 1.5
CPU Underclocking
Enabled Power Eficcient Worqueues
Added SmartMax Governor
Added Yankactive Governor
Added Alucard Governor
Added Intellimm Governor
Added Impulse Governor
Added Zzmoove Governor
Added TripNdroid I/O Schreduler
Added SIO I/O Schreduler
Added ZEN I/O Schreduler
Added fiops I/O Schreduler
Some Kernel Optimizations
GPU Overclock (533Mhz) (thanks to pinkflozd)
GPU Underclock (100Mhz) (thanks to pinkflozd)
Added Conservative GPU Governor
Permissive SElinux
Added LCD_KCAL
Added -02 optimization flags
Enabled Kernel NEON Mode
Init.d Support
Added Optimized ARM RWSEM algorithm
Added USB Fast Charge V2
Added KEXEC HARDBOOT PATCH
Added MSM HotPlug
Added Bricked HotPlug
Added Intelli HotPlug
Added Alucard Hotplug
Enabled On/Off Support for ARCH_POWER & GENTLE FAIR SLEEPERS
Added PegasusQ Governor
Added Fauxs Sound
Added High Performance Headphone Mode
Added Fsync On/Off Support
Updated CPU Boost Driver
Lots Of Tweaks and Optimizations
Update linux kernel 3.4.42 >> 3.4.107
Added DT2W & S2W VERSION
This kernel has now inbuilt SYNAPSE suport :highfive: , Big thanks and credits to @apb_axel for UKM
To tweak you will have to download Synapse from PlayStore created by Andrei Lux it includes all kernel features...
DOWNLOAD
ATTACKED-KERNEL V8
ATTACKED-KERNEL V8 (DT2W & S2W VERSION)
OLD DOWNLOADS
STOCK KERNEL FOLDER
XDA:DevDB Information
ATTACKED KERNEL - STOCK, Kernel for the Moto G
Contributors
attack11, attack11, faux123, savoca, varun chitre , pinkflozd ,franciscofranco ,shivamk11, ion-storm, alin23, anarkia1976, neobuddy89 ,blechd0se ,myfluxy, F4k, hurtsky
Source Code: https://github.com/attack11/kernel-msm-lollipop
Kernel Special Features: Simple & Stable Kernel
Version Information
Status: Stable
Current Stable Version: V8
Stable Release Date: 2015-05-26
Created 2015-04-06
Last Updated 2015-06-08
Reserved
Changelog:
06-04-15
First Release
07-04-15
Second Release
Added Init.d Support
Added Optimized ARM RWSEM algorithm
Fixed Governors
Other changes check Git
09-04-15
Third Release
Added Alucard Governor
Added Fast Charge V2
Added KEXEC HARDBOOT PATCH (test please)
Fixed version not showing in settings
Tweaked SmartMax more battery friendly
Fixed weird frequencies
Disabled 96MHz overclock frequency (seems to work better at minimum 192 MHz)
Updated MSM HotPlug, It works a lot better now
Enabled ARCH_POWER and disabled GENTLE FAIR SLEEPERS
14-04-15
Fourth Release
Added Inbuilt SYNAPSE support (read OP)
Enabled On/Off Support for ARCH_POWER & GENTLE FAIR SLEEPERS
Added PegasusQ Governor
Added Fauxs Sound
Added Fsync On/Off Support
Lots Of Tweaks and Optimizations
Disabled CPU boost & SmartMax Governor for now (was causing issues)
22-04
Fiveth Release
Improved Synapse a little more for our device
Fixed some bugs
Added back SmartMax Governor
Added Alucard Governor
Added Intellimm Governor
Added Impulse Governor
Added Zzmoove Governor
Added back CPU Boost On/Off Support
02-05
Sixth Release
Update linux kernel 3.4.42 >> 3.4.107
Added DT2W
Added S2W
Added Alucard Hotplug
Disabled MPdecision & Touch Boost
Updated Installer script to install busybox & others...
04-05
Seventh Release
Reverted DT2W
Reverted S2W
Reverted Disabled MPdecision & Touch Boost
Updated Installer script & others...
26-05
Built From the scratch
Updates from Motorola & CM sources
New Updated Installer Script
Updated msm_hotplug
Added intelli_hotplug
Added Bricked_hotplug
Updated Cpu Boost Driver
Updated Interactive & Ondemand CPU Governor
Updated simple_ondemand GPU Governor
Added High Performance Headphone Mode
Update UKM with more stuff
Update S2W & DT2W VERSION
Some other stuff... Check git !
The Governors are working fine now !
Love u
Really waiting for it
Beauty!! I'm waiting long time for stock kernel
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Awesome! I have been waiting for so long, does it have fauxsound support?
Cjit26 said:
Awesome! I have been waiting for so long, does it have fauxsound support?
Click to expand...
Click to collapse
No, read op, not in that list
init.d support? WIP or already included?
iDynamics said:
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Click to expand...
Click to collapse
Is your /data partition ext4 or f2fs?
iDynamics said:
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Click to expand...
Click to collapse
Great! so it works on GPE 5.1 too, Thanks!
Cjit26 said:
Awesome! I have been waiting for so long, does it have fauxsound support?
Click to expand...
Click to collapse
No, im not planning to add that feature yet, maybe its better to wait faux new kernel
celikbasm said:
init.d support? WIP or already included?
Click to expand...
Click to collapse
I am working on it, hopefully today i release a new version with fixed governors and init.d support
Oh okay, it works great so far man,good job :good:
attack11 said:
ATTACKED-KERNEL
Click to expand...
Click to collapse
This guy is making lot of good contribution to the Moto G XDA community in the recent past.
I think we can repay him with a little gesture of appreciation.
I thought of making him a new sig.. Hope you like it attack11.. If no, let me know what changes you need.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for your kernels.
Cheers!!
The /data partition is ext4.
hmnk said:
This guy is making lot of good contribution to the Moto G XDA community in the recent past.
I think we can repay him with a little gesture of appreciation.
I thought of making him a new sig.. Hope you like it attack11.. If no, let me know what changes you need.
Thanks for your kernels.
Cheers!!
Click to expand...
Click to collapse
Wow, Thanks a lot! Its Perfect!
V2 its Out !
Changes:
Added Init.d Support
Added Optimized ARM RWSEM algorithm
Fixed Governors
Other changes check Git
There are some weird issues with some frequencies, please test, Cheers!
I cant able to download this kernel from AFH . I have no idea why this happens
I'll flash this on stock 5.0.2 later today and report in case i run into any issues. I wish that this version for stock roms becomes as good as the version for aosp / cm
Well for me on 5.1 GPE the camera gets broken and now when getting back to stock kernel the Wi-fi won't turn on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void. Nah! Just kidding No warranty is void in YU. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Reloaded Kernel was build keeping in mind the the stability and performance of your device.
A lots of battery Saving tweaks also applied to keep the battery consumption minimal.
Experience your zeus like never before.
Features
CPU Governors
ElementalX
Conservative
Darkness
Impulse
Intelliactive
Interactive
Ondemand
Performance
Powersave
Smartmax_eps
CPU Hotplug
ThunderPlug
Alucard
IO Schedulers
BFQ
FIOPS
NOOP
ROW
DEADLINE
CFQ
SIO
SIOPLUS
ZEN
Common
Kernel Upstream to 3.10.104
OverClocked Big Cluster upto 1.71GHz
OverClocked Little Cluster upto 1.21GHz
CPU Optimization
GPU Optimization
Kexec and F2FS Support
Added support for zRAM and zsmAlloc with LZ4 Compression
Reloaded Thermal System (Based on IntelliThermal v3.1)
KCal(Screen/Vibrance-Control) v2
PowerSuspend Drivers v1.7
Tweaks for better Performance and Battery life
Optimization on Interactive Governor
Support for Fast Charging (ThunderCharge 2.1)
Support for Adreno Idler
Support for Dynamic Sync
Support for Power Efficient Work Queues
WakeLock Toggles
Vibration Controller
Low-Memory Killer
Wake-Up Gestures
Interactive init.d script for better performance
Credits
CM Team
YU Televentures
Shoaib05 (for kernel upstream and many important commits)
Aayushrd7 (For Helping)
darshan1205 (For helping)
If you like my work, consider buying me a cup of coffee
XDA:DevDB Information
Reloaded Kernel, Kernel for the YU Yureka
Contributors
riteshsaxena, CM Team, Yu Televentures, Sanyam Jain, Aayush Bucha, Shoaib Anwar, Darshan Manjrekar
Source Code: https://github.com/RiteshSaxena/Reloaded_tomato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: X6
Stable Release Date: 2017-05-08
Created 2017-02-15
Last Updated 2017-05-08
Notes
Use Kernel Adiutor-MOD to apply settings! Download Link for Kernel Adiutor-MOD--https://github.com/yoinx/kernel_adiutor/raw/master/download/app/app-release.apk
Changelogs and Downloads
X6
Changelogs and Download
X5
Changelogs and Download
X4
Changelogs and Download
X3
Changelogs and Download
X2
Changelogs and Download
Old Build available here:http://forums.yuplaygod.com/threads...ed-mn-n-f2fs-kexec-random-reboot-fixed.46152/
Recommended Settings
===============PERFORMANCE===============
CPU Tab
Big Cluster
Max-1700MHz
Min-800MHz
Governor-intelliactive
Little Cluster
Max-1200MHz
Min-800MHz
Governor-intelliactive
GPU
Max-550
Min-220
Governor-msm-adreno-tz
Adreno Idler-> OFF
============BALANCED (BAISED TOWARDS PERFORMANCE)============
CPU Tab
Big Cluster
Max-1700MHz
Min-200MHz
Governor-interactive with init.d tweaks
Little Cluster
Max-1200MHz
Min-200MHz
Governor-interactive with init.d tweaks
GPU
Max-550
Min-220
Governor-msm-adreno-tz
Adreno Idler- ON
============BALANCED (BAISED TOWARDS BATTERY)============
CPU Tab
Big Cluster
Max-1500MHz
Min-200MHz
Governor-smartmax_eps
Little Cluster
Max-1000MHz
Min-200MHz
Governor-impulse
GPU
Max-465
Min-220
Governor-Simple ondemand
=============EXTREME BATTERY===============
CPU Tab
Big Cluster
Max-600MHz
Min-200MHz
Governor-Smartmax_eps
Little Cluster
Max-800MHz
Min-200MHz
Governor-smartmax_eps
GPU
Max-400
Min-220
Governor-Simple ondemand
===============COMMON===============
CPU Hotplug
As Per your Preference
Thermal
Set Temp limit to 50
Wake Locks
Turn off all. Enable them if any problem arises.
Power and Battery
Enable Charge Rate
Charge Rate -> 1250
IO Scheduler
ZEN for Internal and BFQ for External
Wake Controls
As per your Preference.
Misc
Turn off android logging
Turn on Dynamic Fsync
Update: Reloaded X2Changelogs
*Merge Latest Lineage upstream
*Merge latest CAF Code i.e., Branch 1.11
*Fixed Random Reboot on low Wi-Fi
*Completely Removed Sound Mod
*Removed GPU OC
*Better interactive init.d script added.
*Removed the Optimize for size flag, so that means improved performance.
*Proper -O3 Optimizations for GPU, much better gaming
*More Optimizations for Fluid Performance
*Battery Tweaks
*Removed many useless tweaks
Downloads
[SIZE="4"]http://ouo.io/FEwnSS[/SIZE]
Will it work with resurrection remix v5.8.0?
ndasarathy said:
Will it work with resurrection remix v5.8.0?
Click to expand...
Click to collapse
Yes.
riteshsaxena said:
Yes.
Click to expand...
Click to collapse
Download link not working, could you please provide a mediafire or androidhost link?
KuntalBiswas said:
Download link not working, could you please provide a mediafire or androidhost link?
Click to expand...
Click to collapse
Click on skip ad and you will be redirected to android file host
Work in Cm 12.1???
Update: Reloaded X3
Changelogs
*latest lineage upstream
*more balanced interactive script
*minor bug fixes
*more optimization for smoothness.
*Added TripNDroid IOSCHED
*Faux Sound Mod v3.6 (Optional)
Downloads
Without Sound Mod: http://ouo.io/H0Gpt
Sound Mod: http://ouo.io/7Dyg1
Enjoy the Fluidity
Regards,
Ritesh
will it work in lineage 0s 14.1?
Jeet Joshi said:
will it work in lineage 0s 14.1?
Click to expand...
Click to collapse
Yep
Thnx
Will try X3 on RR5.8.2
riteshsaxena said:
Changelogs
*latest lineage upstream
*more balanced interactive script
*minor bug fixes
*more optimization for smoothness.
*Added TripNDroid IOSCHED
*Faux Sound Mod v3.6 (Optional)
Downloads
Without Sound Mod: http://ouo.io/H0Gpt
Sound Mod: http://ouo.io/7Dyg1
Enjoy the Fluidity
Regards,
Ritesh
Click to expand...
Click to collapse
Thx for the X3
What is the functionality of the Sound Mod. Does it require any additional changes?
Can u guide on this
Im gonna use it on Official RR5.8.2 (for your reference)
It can be used to alter sound volumes beyond the system available values.
mohammad.nomaan said:
Thx for the X3
What is the functionality of the Sound Mod. Does it require any additional changes?
Can u guide on this
Im gonna use it on Official RR5.8.2 (for your reference)
Click to expand...
Click to collapse
It can be used to alter sound volumes beyond the system available values. You need kernel auditor to use it.
riteshsaxena said:
It can be used to alter sound volumes beyond the system available values. You need kernel auditor to use it.
Click to expand...
Click to collapse
Thnx for the information
I flashed X3 on YU+ RR5.8.2 official ROM
Settings to be edited via Kernel auditor app.
Can u share settings
Thnx
Sent from my YU5510 using Tapatalk
mohammad.nomaan said:
Thnx for the information
I flashed X3 on YU+ RR5.8.2 official ROM
Settings to be edited via Kernel auditor app.
Can u share settings
Thnx
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Its there in the second post.
riteshsaxena said:
Its there in the second post.
Click to expand...
Click to collapse
Thnx
I used the settings for Performance and Common as per 2nd post in the Kernel adiutor app.
Can't find settings for sound mod.
Do I need to do any extra settings???
Sent from my SM-N920C using Tapatalk
Update: Reloaded X4Changelogs
*Latest Lineage upstream
*F2FS Fixed and tested
*Reverted smartmax to its original values, means better battery.
*Removed intellithermal due to heating issues.
*Added temp limit in msm thermal
*Updated the interactive script
*Re-added lionfish cpu governor and VR iosched
*Lot of internal changes and minor bug fixes.
Downloads
Without Sound Mod: https://www.androidfilehost.com/?fid=817550096634751128
With Sound Mod: https://www.androidfilehost.com/?fid=817550096634751129
This is the most stable and battery efficient version of Reloaded but still the performance isn't sacrificed.
Will it work with CRdroid v2.3 & resolve random boot issue on wifi??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!DISCLAIMER!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war or your phone flies away because its fast. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
----NOTICE----
ATM this kernel is only compatible with 7.x/8.x LOS/AOSP and other based roms.Please don't expect performance of a one plus 5 and battery life of an inverter.
NOTE- the stock settings for kernel is for battery life and light gaming so in case you feel any lag,then please tune it up to your liking!
!!!!WARNING!!!!
Before posting, DO read EACH and EVERY "OP" POST made by me!! Any post which is rude, report bugs incorrectly,USELESS POSTS or ask for ETAs, WILL be REPORTED to the MODS!
All information you may be looking for can be found either in this thread or under F.A.Q or by performing a simple search. Think before you post.You have been warned!!!
Kernel features:-
Upstreamed to Linux 3.10.108
Build with Latest Linao GCC 6.4 Toolchain
Based on CAF tag LA.BR.1.3.6_rb1.23
Based on Prima tag LA.BR.1.3.6_rb1.23
Synced with latest changes by LineageOS
Goodix Support
UV CPU
CPU Voltage Control[-60 mV by default(stable)]
-O3,Justarchi's,cortex a72-a53 and other optimisations
Spectrum App Support
enabled arch power
New CPU Governers-zzmove,despair,elementalx,cafactive,bioshock,relaxed,bluactive,cultivation
Big clusters OC at 1958Mhz & small clusters at 1440 Mhz
Several new i/o-Maple,zen,sioplus,fiops,etc
Added LazyPlug Hotplug
Using Anykernel2 by osmosis
Included slimbus overclock
Wake Controls by flar2
USB FastCharge
Fingerprint Boost
AdrenoBoost
exfat and NTFS support
Added Kcal Support
Franco' QC 2.0t
Dynamic Fsync
Added powersuspend and frandom
Fully permissive kernel
Sound Control by Flar2
disabled loads of craps
Latest Busybox
Enabled Advanced Tcps(default:Westwood)
entropy updates and tuned zram values with tuned up governers
miscellaneous updates
More(i forgot)
****NOTICE****
This is a kernel,so please do not expect REGULAR builds.New builds can be rolled out the same day or once in a week or maybe once in a month.
I will not add lots of fancy stuffs.whatever you see here goes under several tests first and if it performs well,then it is added.Suggestions are always welcomed!
Do not post external links or make mirros without my permission!
Please read FAQ properly, will try to answer all questions there and don't post uselessly and get yourself in trouble.
Recommended app for tuning: EX Kernel Manager/Kernel Adiutor/Spectrum
HOW To FLASH
The lastest version TWRP IS RECOMMENDED!
Keep the kernel.zip in your ext sd/internal sd.
Boot to latest TWRP(recommended)
dirty flash your stock boot.img
Flash the Kernel.zip
Reboot!
Bugs:
Tell me.
Not working on:
idk,you tell me :v
Downloads and Changelog in Post #2
NOTE:First boot may take some time,so while its booting,don't forget to press the thanks button!(its free)
Credits:
@TheStrix for the initial bringup:good:
@AmolAmrit @warlord_rk @TheDarkStrix @AKabhishek @Wizper99 and all my teammates and telegram users who always bugged me and never tested my builds
@nicknitewolf, @ktomov @flar2 , @Santhosh M @thomas1991_12, @osm0sis, @neobuddy89 (my inspiration ), @DespairFactor and all other great developers!
(If i forgot your name,then please Drop me a PM!!)
XDA:DevDB Information
Infected Kernel, Kernel for the Xiaomi Redmi Note 3
Contributors
neonkat
Source Code: https://github.com/neonkat/kenzo_kernel.git
Kernel Special Features: flash it and you will know.
Version Information
Status: Stable
Current Stable Version: R11
Stable Release Date: 2017-11-10
Created 2017-02-18
Last Updated 2017-11-10
Downloads
----Downloads----
Unified Builds
AndroidFileHost(Click ME!)
-----------------------------------------------------------------------------
DO NOT CREATE MIRRORS!!IF LINKS ARE NOT WORKING THEN TELL ME!!!
Changelog:
R11(10-11-2017)
*rebased kernel on rb1.23,most of the old stuffs have been removed.fixing a lot of issues.
*Linux 3.10.108
*Merged battery issue patches
*updated zram and lz4 modules
*upstream updates and fixes
OLDER:
R10(14-10-2017)
*merge LA.BR.1.3.6_rb1.22
*fix video recording issue
*merge latest changes from los
*check git lulz
R9(05-09-2017)
*initial O support(still in testing)
*switch to linaro GCC 6.4.1 2017.08
*new flashlight hal compatibility
*enabled slimbus,should improve sound quality(can't say,try yourself )
*builds are now full -O3
*lots of upstream updates and fixes
R8(11-08-2017)
*Merge Caf/Prima LA.BR.1.3.6_rb1.21
*Switch to Linaro GCC 6.4 toolchain
*switch back to old fp boost drivers
*Merge Lineage kernel changes
*enable 621mhz gpu freq for both speed bins
*merge latest f2fs changes
*enable ksm
*misc. updates and fixes
R7(12-07-2017)
*Linux 3.10.107
*Merge Caf/Prima LA.BR.1.3.6_rb1.20
*Switch to stock GCC 6.4 toolchain
*Fixed zram
*CPU Voltage Control by billchen
*Merge cpu boost,lz4,etc updates
*Fingerprint boost drivers
*Upstreams updates
*Kate support
*Update all profiles
R6(18-06-2017)
*Linux 3.10.106
*Merge Caf/Prima LA.BR.1.3.6_rb1.19
*Switch back Linaro 6.3.1 2017.06-dev1
*upstream updates
*Added bugs
R523-05-2017)
*Merge CAF/Prima LA.BR.1.3.6_rb1.18
*Builds are now are fully compatible with billchen's ramdisk,settings will apply correctly now
*Switch to stock GCC 6.3 toolchain(Compiled from gcc 6 branch,no modification)
*Added Support for Spectrum! Download from Goolge Play , more info here
*Updated lazyplug and Maple i/o
*Merged latest changes by LOS
*Lots of upstream updates
*new interactive governer tunings and stock settings updated(stock settings is balanced profile)
R410-05-2017)
*Unified for both fp
*LA.BR.1.3.6rb_1.17
*add cultivation cpu governer
*sync with los trees
*enabled cpu boost to reduce micro stuttering
*franco' qc 2.0
*Dynamic Fsync
R323-03-2017)
*Add bluactive Governer
*remove fifo,tripndroid,sio,vr i/o
*fix safety net and bootloop on newer magisk
*Upstream Updates
*Fixed zen i/o crash
*adrenoboost implemented
*relaxed and interactive governer updates
R203-03-2017)
*UV cpu by 1.5 mA
*add zzmove profiles
*merge LA.BR.1.3.6_rb1.14 & Prima WLAN drivers
*minor update and fixes
R1-Goodix26-02-2017)
*Initial Release
R1-FPC18-02-2017)
*initial release
Reserved
#Gaming(performance)
big clusters-elementalx/performance
small clusters-elementalx/performance
max cpu freqs
gpu governer-performance
i/o-zen/fiops
turn off adreno idler
#Balanced
big clusters-interactive/zzmove/relaxed
small clusters-bioshock/relaxed
i/o-sioplus
#Heavy Multi-tasking
big clusters-interactive
small clusters-bioshock
i/o-bfq/sioplus
#Mother of GOD battery life(ofcourse laggy)
both cpu-powersave
big clusters-off
small clustters-1190mhz
i/o-noop/fifo
#Personal Setup
big clusters-interactive
small clusters-bioshock
i/o-sioplus
i/o readahead-1024
have a good profile?let me know so can add here!
P.s-very few stuffs but will be updated as new things will be added to kernel.
Want your our setup?follow this.
Nice!
Nice ! This kernel is for FPC or Goodix ?
Waiting the download link
Reserved
And here is pruh cat with pruh kernel
*Jihad mode working*
Great bro
Do you used over volte for over clocking,???
Sent from my Redmi Note 3 using Tapatalk
SharkEzz said:
Nice ! This kernel is for FPC or Goodix ?
Waiting the download link
Click to expand...
Click to collapse
I have FPC so building for FPC only atm,will soon get Goodix builds too as soon as i get testers.
Finally! Nice work Bud
Gonna test and comment how good it is!!
Thanks and regards!!
Nice i will try in roms nos ?
zamzam_asad said:
Nice i will try in roms nos
Click to expand...
Click to collapse
thanks!hope you like it, btw this only supports fpc.
important:if you have fpc,then flash fpc kernel by the nos developer first and then flash my kernel.
Encryption error with f2fs formatted /data , megax91 recently patched this issue on his kernel it's about 1commit , could you contact him and patch this ?
@neonkat
My impressions:
-Smooth
-Looks not to eat lot of battery... Although I have seen on EXKM, (every app closed), and leaving the phone there small clusters frequencies are going up and down and up and down (on default settings -relaxed governor forma small cluster-)
-LazyPlug is not working (I tried Scream Manager and EXKM), any core is turned on or off and configurations are not being saved (forma example maximum cores).
Thanks and regards!!
---------- Post added at 08:21 PM ---------- Previous post was at 08:20 PM ----------
neonkat said:
thanks!hope you like it, btw this only supports fpc.
important:if you have fpc,then flash fpc kernel by the nos developer first and then flash my kernel.
Click to expand...
Click to collapse
On NOS, FPC drivers are wiped (it doesn't occur with Guyver/Zetsubou/Scream Kernel).
Thanks and regards!
neonkat said:
thanks!hope you like it, btw this only supports fpc.
important:if you have fpc,then flash fpc kernel by the nos developer first and then flash my kernel.
Click to expand...
Click to collapse
Aamiin. Nope im fpc user ?? . Oh what in karnel audio must seetting again or no? Fast charging work?
Using this kernel on DU and it is ****ing smooth.. best kernel for now Thanks @neonkat for great work
aaz03 said:
Encryption error with f2fs formatted /data , megax91 recently patched this issue on his kernel it's about 1commit , could you contact him and patch this ?
Click to expand...
Click to collapse
yeah,i talked it him and he told me about that,will soon merge them and get you a build!
miguelang611 said:
My impressions:
-Smooth
-Looks not to eat lot of battery... Although I have seen on EXKM, (every app closed), and leaving the phone there small clusters frequencies are going up and down and up and down (on default settings -relaxed governor forma small cluster-)
-LazyPlug is not working (I tried Scream Manager and EXKM), any core is turned on or off and configurations are not being saved (forma example maximum cores).
Thanks and regards!!
---------- Post added at 08:21 PM ---------- Previous post was at 08:20 PM ----------
On NOS, FPC drivers are wiped (it doesn't occur with Guyver/Zetsubou/Scream Kernel).
Thanks and regards!
Click to expand...
Click to collapse
lazyplug is on by default,for some reason it is not showing up in kernel adiutor.lazyplug doesn't shut down cores quickly,it keeps cpu on for a specific interval of time and when there is no load on the cpu,it shuts it down,saving the time dealy between turning on/off any cpu.no such issue for me in exkm app,maybe update your app.
fpc drivers wiped?could you please explain it?
ik fpc drivers are shipped in different kernel(fpc fix).what i recommended is flash the fpc kernel first and then flash my kernel(because using anykernel).
zamzam_asad said:
Aamiin. Nope im fpc user . Oh what in karnel audio must seetting again or no? Fast charging work?
Click to expand...
Click to collapse
kernel audio?sorry didn't get that.
btw flar2' sound control is there and yeah,usb fast charge added too!(disabled by default)
neonkat said:
yeah,i talked it him and he told me about that,will soon merge them and get you a build!
lazyplug is on by default,for some reason it is not showing up in kernel adiutor.lazyplug doesn't shut down cores quickly,it keeps cpu on for a specific interval of time and when there is no load on the cpu,it shuts it down,saving the time dealy between turning on/off any cpu.no such issue for me in exkm app,maybe update your app.
fpc drivers wiped?could you please explain it?
ik fpc drivers are shipped in different kernel(fpc fix).what i recommended is flash the fpc kernel first and then flash my kernel(because using anykernel).
Click to expand...
Click to collapse
My fault... I reflashed NOS and I forgot to reflash fpc-fix...
And about LazyPlug, it doesn't seem to be very effective, then...
Thanks and regards!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't own that device.Kubix99 own
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* BOOM goes the Dynamite
*/
Hi.
My name is Rafal. I'm from Poland.
I come back to collab with Kubix99 to make this device still alive.
Here is a page about my fifth kernel of my harfix series and Kubix's first kernel.
Kernel is based on LineageOS14.1 kernel by nijel8.
We highly recommend to use it with 7.1.x ROMs.
Features:
- Interactive, ondemand, conservative, powersave, userspace, performance governors
- NOOP, Deadline, BFQ, CFQ, ROW, FIOPS I/O schedulers
- Compiled using latest Google NDK
- Quick Charge
- Adreno idler
- ZRAM with LZ4 and LZO compressions
- Input boost
Changelog:
Real-time changelog
1.3 27.09.17
- Hardware flags
- Fingerprint unlock boost
- GPU lower frequencies
- Add Frandom
- Optimized Task-Search
- Reduced Wakelocks
- Optimized SQRT
- Fix input boost
- More Tweaks and optimizations
1.1 23.09.17
- Add KCAL v2
- Add sound control
- Add fcnyc on/off toggle
- Add backlight dimmer on/off toggle
- Cpufreq, cpuboost tweaks
- Improve network speed
- Remove userspace governor
- Optimise CFQ for SSDs
- Boot with 6 CPUs
- Remove few ineffective optimizations
1.0 13.09.17
- Fix build errors and typos
- Compile using stable Google NDK r15c
- Add hk config
- Add Anykernel2 as installator
- Add Harfix builder v1.1
Bugs:
You tell me
Download:
If You want to support me, please use openload and disable adblock. Thanks
Openload:
Stable:
1.3
1.1
1.0
Google drive:
Stable:
1.3
1.1
1.0
Credits:
All people who is marked in source.
Helpers:
Nobody :'(
Testers:
Nobody :'(
Donators:
Nobody :'(
Like my project?
hit thanks!
Want to make this project more popular?
or want notification on site update?
follow this project!
Love my project?
Donate!
All values are welcome
XDA:DevDB Information
Harfix Kubix Kernel, Kernel for the Xiaomi Mi Max
Contributors
rafciowis1999, Kubix99
Source Code: https://github.com/wisniew/HK-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-09-23
Created 2017-09-13
Last Updated 2017-09-27
Reserved.
thanks
Very willing to try right away
Helium support Sir???
hans william said:
Helium support Sir???
Click to expand...
Click to collapse
Yes, helium support is here!
can i flash this on RR rom?
Thanks....
Super.. Downloaded and flashed in RR and running fine.
Kubix99 said:
Yes, helium support is here!
Click to expand...
Click to collapse
Thank you Sir, I will try, downloading now...
Seems to work well for me!
Can you add cpu hotplug, undervolt (including custom voltage table support if possible) and gamepad drivers please?
That's all I really desire tbh.
Thankyou for your hard work!
Thanks for your work, bro. This kernel works well for me, stable enough.
Any news for Oreo's kernel of MIMAX?
Hit thanks of course.
rafciowis1999 said:
Click to expand...
Click to collapse
Hello! tell me, is there a way to add kcal to your new kernel? Thank you
arbitrarygrill said:
Seems to work well for me!
Can you add cpu hotplug, undervolt (including custom voltage table support if possible) and gamepad drivers please?
That's all I really desire tbh.
Thankyou for your hard work!
Click to expand...
Click to collapse
Hotplug and gamepad support will be in next builds but I do not want to add uv to this Kernel.
Neil.gwx said:
Thanks for your work, bro. This kernel works well for me, stable enough.
Any news for Oreo's kernel of MIMAX?
Hit thanks of course.
Click to expand...
Click to collapse
For now we will focus on 7.1.x kernel only
STuXu9I said:
Hello! tell me, is there a way to add kcal to your new kernel? Thank you
Click to expand...
Click to collapse
KCAL will be soon as Kubix99 will add what He want.
Great to have you back rafciowis1999
It will be great if sound control can be included in the kernel
thanks
guys, I have a question.
if i happened to update from my previous rom with HKK, to a new one,
should I re-flash HKK?
bluviper said:
guys, I have a question.
if i happened to update from my previous rom with HKK, to a new one,
should I re-flash HKK?
Click to expand...
Click to collapse
Yes, You need to reflash it. This kernel use AnyKernel2 so too much installs will not damage anything.
rafciowis1999 said:
Yes, You need to reflash it. This kernel use AnyKernel2 so too much installs will not damage anything.
Click to expand...
Click to collapse
now thats a relief!
much thanks!
Just one issue with this kernel..
In the LiveDisplay feature on LOS be nijel8 ...
The automatic mode doesnt work as intended..
It stays in night mode for a long time and suddenly changes to day mode at seriously strange timings...
QwertySDuos2 said:
Just one issue with this kernel..
In the LiveDisplay feature on LOS be nijel8 ...
The automatic mode doesnt work as intended..
It stays in night mode for a long time and suddenly changes to day mode at seriously strange timings...
Click to expand...
Click to collapse
This kernel for now don't have ANY changes then nijel8 kernel. This is stock with installator and nothing else.
rafciowis1999 said:
This kernel for now don't have ANY changes then nijel8 kernel. This is stock with installator and nothing else.
Click to expand...
Click to collapse
What do u mean ???
Ur kernel and los stock kernel are same ??
Btw my issue is also in stock los nijel8 kernel..
Its due to deep sleep of the phone during the night...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
* DQIC Sources
* MTweaks Support
* Disabled adb notification
* Spectrum support and profiles
* CPU & GPU Voltage settings
* Battery settings
* GPU Voltage & Overclock settings
* F2FS and NTFS Support (Coming soon)
* Updated Ondemand and Conservative governors
* Add "Custom" voltage profile
* Wakelocks settings
* Busybox 1.27.2
* Max Freq. big A72 -> 2800MHz
* Max Freq. LITTLE A53 -> 1794MHz
* Min Freq. CPU big A72 -> 208MHz
* Min Freq. CPU LITTLE A53 -> 130MHz
* Toolchain UBER 6.3.1
* Safetyfnet: PASS
* SELinux Permissive
* IO Schedulers: noop, maple, cfq,zen,deadline,fiops (More coming soon)
* CPU Governors: blu_active, smartmax_eps, interactive, performance, powersave, bioshock, smartass2 (More Coming Soon if Requested)
* Reduced wifi wakelocks
* CRC check Enable/Disable setting
* Init.d support
(More features & optimizations coming soon when i have time. As you can understand this kernel is pretty new and will be improved by day by.)
OPS!:
If you have installed other Kernels before, you need to reflash your rom and after than flash this kernel. Otherways you will get bootloop!
Changelogs:
Version v1.5:
(*) Added zen, fiops, deadline
(*) (YOSS!)Gpu Voltage Controls!
(*) ThunderPlug Driver
(*) Powersuspend for better battery
(*) Spectrum profile updates
(*) Overall optimizations
Dracula Kernel 1.0:
Maple iosched
Added cpufreq: blu_Active, smartass2, bioshock,smartmax_eps
Added configurable voltage & led contols
Optimizations and Spectrum support
TELEGRAM
If you want news & changelogs and download as fast as possible, you can join our Telegram News Channel.
Click below to join:
http://t.me/draculak
DOWNLOAD
Samsung Galaxy S7 Edge (hero2lte): Click here
Samsung Galaxy S7 Flat (herolte): Click here
Feel free to donate if you want.
XDA:DevDB Information
[KERNEL][AOSP][G93X/F/FD/W8/S/K/L] Dracula Kernel 1.5 [BETA] , Kernel for the Samsung Galaxy S7 Edge
Contributors
sdiown, morogoku
Source Code: http://github.com/MuhammedKpln/AOSP-Dracula-Kernel/
Kernel Special Features:
Version Information
Status: Beta
Stable Release Date: 2017-10-12
Current Beta Version: 1.0.0
Created 2017-10-07
Last Updated 2018-01-06
Battery life if someone thinks about it.
ReservedNew!! Changelog:
Version v1.5:
(*) Added zen, fiops, deadline
(*) (YOSS!)Gpu Voltage Controls!
(*) ThunderPlug Driver
(*) Powersuspend for better battery
(*) Spectrum profile updates
(*) Overall optimizations
Please clear Mtweaks data for an bug-free expreience!
Download:
S7 Edge(hero2lte); Click here to download
Optional Link for S7 EDGE (Click Here)
S7 Flat(herolte); Click here to download
Optional Link for S7 FLAT (Click Here)
Tanks
Please correct link to https://androidfilehost.com/?fid=817906626617937108&
for edge
topsecret78 said:
Please correct link to https://androidfilehost.com/?fid=817906626617937108&
for edge
Click to expand...
Click to collapse
İt's problem with androidfilehost. İt seems to br good right now. Try vpn if its not connecting
This kernel doesnt work in aokp ROM. Lost sound and microsd card not mounted
Thanks Muhammed KAPLAN @sdiown
rafik25 said:
This kernel doesnt work in aokp ROM. Lost sound and microsd card not mounted
Click to expand...
Click to collapse
İt works great, if you have installed previously any kther kernel like prime kernel, reflash your rom again then flash this kernel.
hasanben35 said:
Thanks Muhammed KAPLAN @sdiown
Click to expand...
Click to collapse
Thanks .
sdiown said:
İt works great, if you have installed previously any kther kernel like prime kernel, reflash your rom again then flash this kernel.
Thanks .
Click to expand...
Click to collapse
hello bro no other kernel installed before ur kernel
rafik25 said:
hello bro no other kernel installed before ur kernel
Click to expand...
Click to collapse
Can u please add me on telegram. @XELISam
Note 8 FE planned?
Thanks
sdiown said:
Can u please add me on telegram. @XELISam
Click to expand...
Click to collapse
No using telegram ur kernel works fine with crdroid
No permissive kernel?
Happymeal1887 said:
Note 8 FE planned?
Click to expand...
Click to collapse
Not yet..
5dprince said:
Thanks
Click to expand...
Click to collapse
Thanks
rafik25 said:
No using telegram ur kernel works fine with crdroid
No permissive kernel?
Click to expand...
Click to collapse
Fine, you can change it in miscellaneous with mtweaks
0% Deep Sleep with this Kernel on herolte
Link is out
lfpeacemaker said:
Link is out
Click to expand...
Click to collapse
Try the new version
timo.helfer said:
0% Deep Sleep with this Kernel on herolte
Click to expand...
Click to collapse
Can you try v1.5?
sdiown said:
Try the new version
Can you try v1.5?
Click to expand...
Click to collapse
bootloop on 1.5 in s7 edge
66% Deep Sleep now