I'm on ATT running the T-Mobile build LMY47M, I've always been on ATT I just did the swapped Sim card to trick it into the 5.1 update.
So my first question is, have I been taking off the ATT update path now?
If yes, do I need to load the factory LMY47Z in order to get to 5.1.1 or wait for an ATT OTA image?
Thanks for all your help.
choclab said:
I'm on ATT running the T-Mobile build LMY47M, I've always been on ATT I just did the swapped Sim card to trick it into the 5.1 update.
So my first question is, have I been taking off the ATT update path now?
If yes, do I need to load the factory LMY47Z in order to get to 5.1.1 or wait for an ATT OTA image?
Thanks for all your help.
Click to expand...
Click to collapse
There is already a Factory Image for 5.1.1 of both AT&T and T-Mobile. You can flash your AT&T Factory image to return to Stock 5.1.1.
I haven't seen an ATT factory image. On the google developers site it has a 47Z for sprint and USC, and a 28E for T-Mobile.
choclab said:
I haven't seen an ATT factory image. On the google developers site it has a 47Z for sprint and USC, and a 28E for T-Mobile.
Click to expand...
Click to collapse
AT&T is receiving the Z build.
choclab said:
I haven't seen an ATT factory image. On the google developers site it has a 47Z for sprint and USC, and a 28E for T-Mobile.
Click to expand...
Click to collapse
Oh am sorry, got confused between Sprint and ATT. The Sprint (7Z) version is International image so I am pretty sure that would be fine to flash. I am not sure how the carrier OTA would differ much from the International version since I don't use Sprint or ATT.
OK thanks. Do you think being on the M build takes me out of the ATT OTA loop?
Otherwise I was going to try wugfresh to flash the Z build.
choclab said:
OK thanks. Do you think being on the M build takes me out of the ATT OTA loop?
Otherwise I was going to try wugfresh to flash the Z build.
Click to expand...
Click to collapse
If you check the OTA url thread, you see that Z comes from D, E and I but not M.
http://forum.xda-developers.com/showthread.php?t=2906493
OK thank you, I'll flash Z tonight then.
Related
Has anyone one got a upgrade for the android 5.1 for nexus 6 on the att network?I was told i was getting update from google but for some reason i not see my update for the android 5.0.1 so the question is why is it not show android 5.1?
perlsyntax said:
Has anyone one got a upgrade for the android 5.1 for nexus 6 on the att network?I was told i was getting update from google but for some reason i not see my update for the android 5.0.1 so the question is why is it not show android 5.1?
Click to expand...
Click to collapse
Not me, not yet.
MHB1638 said:
Not me, not yet.
Click to expand...
Click to collapse
So it not me So tha make me feel better.thanks
perlsyntax said:
Has anyone one got a upgrade for the android 5.1 for nexus 6 on the att network?I was told i was getting update from google but for some reason i not see my update for the android 5.0.1 so the question is why is it not show android 5.1?
Click to expand...
Click to collapse
The *network* has nothing to do with it.
Google trickles the updates out over a period of several WEEKS.
You either wait for it to hit your SERIAL NUMBER, or you download it from the google factory images page.
I sideloaded through adb on my 100% stock att N6. Really quick and easy.
CraigP17 said:
I sideloaded through adb on my 100% stock att N6. Really quick and easy.
Click to expand...
Click to collapse
I have a question for you. Would you be able to pull the OEM partition and send me it? I had AT&T n6 and didn't think to back it up. I'm all root and custom roms
CraigP17 said:
I sideloaded through adb on my 100% stock att N6. Really quick and easy.
Click to expand...
Click to collapse
Which Factory image did you sideload? Theres a LMY47D and LMY47E... Also did you have any issues sideloading it on the ATT N6?
detective_27 said:
Which Factory image did you sideload? Theres a LMY47D and LMY47E... Also did you have any issues sideloading it on the ATT N6?
Click to expand...
Click to collapse
I sideloaded D on my AT&T N6 without any issues.
detective_27 said:
Which Factory image did you sideload? Theres a LMY47D and LMY47E... Also did you have any issues sideloading it on the ATT N6?
Click to expand...
Click to collapse
I also have a AT&T Nexus running 5.1 factory image. I flashed the D version. Its preloaded with 4 AT&T apps that you can delete. Seems smooth and the towel root method works with no issues. I flashed VIA fastboot method.
Anyone running 47E with the 98R radio on AT&T? If so, thoughts? Working well?
slider112 said:
Anyone running 47E with the 98R radio on AT&T? If so, thoughts? Working well?
Click to expand...
Click to collapse
yes
slider112 said:
Anyone running 47E with the 98R radio on AT&T? If so, thoughts? Working well?
Click to expand...
Click to collapse
I started with D. Then flashed E image. I could not see any difference in radio performance (nor anything else for that mater). Back to D.
I'm on the e build the radio is faster on the e build on at&t in my area,plus they just posted a newer factory image its an I build
Will an ota push to put the n6 on a verizon build like LMY47E if its currently on LMY47M and I put a vzw sim in it? Everything works now, just curious if it'll come automatically or if i need to load it manually.
Restola said:
Will an ota push to put the n6 on a verizon build like LMY47E if its currently on LMY47M and I put a vzw sim in it? Everything works now, just curious if it'll come automatically or if i need to load it manually.
Click to expand...
Click to collapse
Probably not. If you're not on E, when Verizon finally releases the OTA, you won't get it.
Thanks. Decided to unlock and flash lmy47e to avoid any issues.
Hi,
Can you please tell me how did you flash lmy47e?
I tried doing that with wugs toolkit, but it just hangs.
Thanks.
NeoMorpheus1337 said:
Hi,
Can you please tell me how did you flash lmy47e?
I tried doing that with wugs toolkit, but it just hangs.
Thanks.
Click to expand...
Click to collapse
Properly, without a toolkit.
Images are here:
https://developers.google.com/android/nexus/images
You need to use fastboot.
All guides and info threads are in general > Sticky roll-up
I'm right in assuming there will be a Verizon specific factory image at some point, correct? I got the OTA notification yesterday, but don't want to go back to stock just to update. And the LMY47Z image that's on Google's page obviously says "For Sprint, USC only."
Thanks
EvanVanVan said:
I'm right in assuming there will be a Verizon specific factory image at some point, correct? I got the OTA notification yesterday, but don't want to go back to stock just to update. And the LMY47Z image that's on Google's page obviously says "For Sprint, USC only."
Thanks
Click to expand...
Click to collapse
Disregard what Google has titled the image. That is the build Verizon users are getting via OTA.
EvanVanVan said:
I'm right in assuming there will be a Verizon specific factory image at some point, correct? I got the OTA notification yesterday, but don't want to go back to stock just to update. And the LMY47Z image that's on Google's page obviously says "For Sprint, USC only."
Thanks
Click to expand...
Click to collapse
47Z is being pushed to numerous other devices (and used successfully) in spite of Google's label. AT&T, and numerous international users. Several VZW users also report satisfactory performance with 47Z.
Ah, thank you to you both.
Hello all, I am an AT&T nexus 6 user. I am unlocked and rooted. I of course tried the OTA, didn't expect it to work since I'm rooted and it of course didn't work. I checked the factory images and there are only sprint and T-mobile versions of the 5.1.1. My question is can I flash the T-mobile version and have a functioning device? I'm sick of this system notification showing up every day telling me that I need to update. Thanks for the heads up
TheEmpyre said:
Hello all, I am an AT&T nexus 6 user. I am unlocked and rooted. I of course tried the OTA, didn't expect it to work since I'm rooted and it of course didn't work. I checked the factory images and there are only sprint and T-mobile versions of the 5.1.1. My question is can I flash the T-mobile version and have a functioning device? I'm sick of this system notification showing up every day telling me that I need to update. Thanks for the heads up
Click to expand...
Click to collapse
You can flash anyone you like. They'll all work with various results. AT&T users, however, are getting LMY47Z as an OTA. Ignore Google's labels.
Evolution_Tech said:
You can flash anyone you like. They'll all work with various results. AT&T users, however, are getting LMY47Z as an OTA. Ignore Google's labels.
Click to expand...
Click to collapse
Hell Ya, thanks for the response so fast. Gonna get flashing
Evolution_Tech said:
You can flash anyone you like. They'll all work with various results. AT&T users, however, are getting LMY47Z as an OTA. Ignore Google's labels.
Click to expand...
Click to collapse
Google finally changed the image label to "5.1.1 (All carriers except T-Mobile US) (LMY47Z)".
The other day I bought a nexus 6 used and didn't know what carrier it was from.. Well I dug around in the settings and found out that it was Verizon. The phone worked fine with my T-Mobile sim just like it should but when I tried flashing 5.1.1 Verizon build lmy48i it just would not flash right... It would just bootloop and nexus root toolkit said everything failed to flash but the bootloader. But I tried again after taking the sim out and it worked first try. Everything is okay, but why does a sim make so much of a difference? Should I be flashing T-Mobile img's?
dude_itsdevon1 said:
The other day I bought a nexus 6 used and didn't know what carrier it was from.. Well I dug around in the settings and found out that it was Verizon. The phone worked fine with my T-Mobile sim just like it should but when I tried flashing 5.1.1 Verizon build lmy48i it just would not flash right... It would just bootloop and nexus root toolkit said everything failed to flash but the bootloader. But I tried again after taking the sim out and it worked first try. Everything is okay, but why does a sim make so much of a difference? Should I be flashing T-Mobile img's?
Click to expand...
Click to collapse
First, you shouldn't use toolkits unless you already know how to use fastboot.
Second, use fastboot and flash the latest T-Mobile factory image if you're using your device on T-Mobile.
Follow method #2 from here:
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Evolution_Tech said:
First, you shouldn't use toolkits unless you already know how to use fastboot.
Second, use fastboot and flash the latest T-Mobile factory image if you're using your device on T-Mobile.
Follow method #2 from here:
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Click to expand...
Click to collapse
Thanks for the super quick reply, I am familiar with fasboot and doing it manually but I'm lazy that's all. It just makes it so simple. thanks for letting me know which image to use. I just had to set up the apn settings to get my data to work right. Will I get otas if I flash the T-Mobile factory image and use their service?
dude_itsdevon1 said:
Thanks for the super quick reply, I am familiar with fasboot and doing it manually but I'm lazy that's all. It just makes it so simple. thanks for letting me know which image to use. I just had to set up the apn settings to get my data to work right. Will I get otas if I flash the T-Mobile factory image and use their service?
Click to expand...
Click to collapse
As long as you're 100% stock and using a T-Mobile sim, you'll be able to get and install T-Mobile OTA's.
LMY48I is not a T-Mobile version. You want LYZ28E or LYZ28J.