Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Working
Wi-fi
Bluetooth
Not Working
USSD
Video Recording
Screen shots
DOWLOAD
Wait Rom is on Testing Mode
INSTALL INSTRUCTIONS:
first download the Rom and placed it in SDcard
Switch off your Mobile
Goto Recovery mode by Pressing Volume Up & Power Button about 20-30 Second
Take a Backup your Current Rom
Wipe All (system,data, cache & dalvik cache)
Then Select The Rom Zip from SDcard And Install it
Wait some times...............
After Complete Installation Install Gapps
You have Successfully Install it
Reboot Now
Placeholder threads are not allowed. When/if you have a link ready, pm me to reopen. Also have a kernel source link ready to post too, per GPL requirements. :good:
Thread closed.
Thanks,
Darth
Forum Moderator
Related
Viper4Android for L90
Supported ROMs: CM12.1 from Quarx
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About Viper4Android
See official "About Us" page:
http://vipersaudio.com/blog/?page_id=11
More information about Viper4Android
See official XDA thread for Viper4Android:
http://forum.xda-developers.com/showthread.php?t=2191223
In this thread I would like to provide a list of tutorials for installing Viper4Android on L90 in different configurations and different scenarios. I decided to do that cause installing Viper4Android since Lollipop has become much harder for average users. This particular thread will work very simple. In here users will be allowed only to post complete tutorials with (for example) instructions how to install Viper4Android or recommended settings configuration. Q&A will be taking place in separate thread. I will also provide a recommended template for users so every instruction looked similar and friendly.
List of tutorials:
1. Installing Viper4Android on CM12.1 from Quarx (by Xemidra)
http://forum.xda-developers.com/showpost.php?p=62915714&postcount=2
Templete for creating your own tutorial:
.txt file with thread structure:
http://www10.zippyshare.com/v/Wc7LRVJD/file.html
ITS NOT ALLOWED TO MIRROR MY FILES , IF YOU WANT TO SHARE , ASK ME , AND ONLY LINK TO THIS ORIGINAL THREAD !!!
---------------------------------------------------------------------------------------------------------------------------
If you like what I'm doing. Please use Thanks! button below.
Installing Viper4Android on CM12.1 from Quarx (by Xemidra)
Installing Viper4Android on CM12.1 from Quarx (by Xemidra)
Supported ROMs: CM12.1 from Quarx.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Requirements:
1. Make sure you have ROOT privileges (Super User or SuperSU).
2. Unlocked bootloader and custom recovery (TWRP recommended) installed on your device for some optional steps.
3. Some or all files from Download section.
Download:
1. Viper4Android_on_L90.zip (required)
http://www99.zippyshare.com/v/0RaYI8EL/file.html
2. Viper4Android_on_L90_optional.zip (optional)
http://www61.zippyshare.com/v/1XC3VKa3/file.html
Instructions:
1. Check for SELinux policy.
- Go to settings > About a phone > SELinux status
- If Enforcing then:
a) Change SELinux policy to Permissive (less secure). Go to point 2
b) Install MOD allowing Viper4Android to work with Enforcing policy (recommended) (requries unlocked bootloader and custom recovery). Go to Point 3
- If Permissive then got to point 4
2. Changing SELinux policy to Permissive.
- Install SELinuxModeChanger-v3.2-release.apk
- Grant ROOT privileges
- Click on "Permissive button"
- Do NOT uninstall this app.
- Go to point 4
3. Installing MOD allowing Viper4Android to work with Enforcing SELinux policy.
- Go to Recovery (TWRP recommended)
- Flash VIPER4Android-supolicy.zip
- Restart your phone
4. Disabling AudioFX.
- Go to Settings > Apps > All
- Find AudioFX and go inside
- Click "Disable" button
- Preside to point 5
5. Installing Viper4Android.
- Download "Viper4Android_on_L90" zip...
- ...and extract "Viper4Android_on_L90" folder onto your SDCard.
- Select right Viper4Android app for you from the folder:
a) Viper4AndroidFX_Modded.apk was created by one user and has Material Design theme included but for me worked only in "compatibility" mode. Can be a security risk.
b) Official Viper4Android_FX_A4.x.apk created by author of the original app. It was NOT modified and works in "normal" mode. (recommended)
- Open the app and select right driver mode for you. (I selected High Quality).
- Configure the app for your liking.
6. That's all. Go ahead and enjoy Viper4Android music experience on LG L90.
Information from tutorial author:
- Tested with CM12.1 form Quarx with standard kernel from Quarx. Version from August 30, 2015.
- Tested with PowerAMP.
- Tested with standard Headphones included by LG.
ITS NOT ALLOWED TO MIRROR MY FILES , IF YOU WANT TO SHARE , ASK ME , AND ONLY LINK TO THIS ORIGINAL THREAD !!!
---------------------------------------------------------------------------------------------------------------------------
If you like what I'm doing. Please use Thanks! button below.
Code:
/*
* Your warranty is now (probably expired) void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
During the porting process of Ubuntu Touch for this device, I decided to share the stock Android recovery that came with the built images. It's basically the stock recovery for Android N. It's a good choice for people who want a minimal lightweight recovery, don't want to use custom recoveries like TWRP, and don't want to use the stock recovery for Android M, because it lacks some features.
Note: This is a stock recovery. I don't think it can flash ROMs, but it's still useful for basic tasks.
Features
- Reboot
- Reboot to recovery
- Reboot to bootloader
- Install ZIP from ADB, internal and external storage
- Factory reset (wipe data and cache)
- Mount /system
- Wipe /system
- Graphics test
- Power off
- MTP
Bugs
I didn't test all of the features, so please, if you find something, tell me
Download
SourceForge
Device sources
Since I built this recovery from the Halium source, check out the Ubuntu Touch port for Z00ED.
Screenshots
See attachments.
Change your mi boot logo to google boot logo it's the splash screen shown before your device starts.
1. Download zip file.
2. Take Backup of your important files (Recommended).
3. Boot into Recovery
4. Locate file and Flash the zip file.
5. Boot into recovery, fastboot , system anywhere you want you see the google boot logo.
Note : This has not been tested yet use it at your own risk.
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Warning Credit @wubaolong
Splash Tool Credit : GokulNC
Hi! I've made a splash screen for this smarthphone.
All credits to chrisch1974 and his tread about How to change the splash screen.
WARNING: Only S-OFF!
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this zip
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Steps for flashing:
1 - Boot your Desire 530 into download mode (Power+Volume Down) and enter:
fastboot erase cache
2 - Start RUU Flash mode:
fastboot oem rebootRUU
3 - Flash the custom splash screen:
fastboot flash zip 2PSTIMG.zip
4 - Make sure that there are no error messages when flashing. If you have one, send the error you got, your operator and the model (htc_a16ul or htc_a16wl)
5 - Reboot and enjoy!
mr.lfrl990 said:
Hi! I've made a splash screen for this smarthphone.
All credits to chrisch1974 and his tread about How to change the splash screen.
WARNING: Only S-OFF!
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this zip
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Steps for flashing:
1 - Boot your Desire 530 into download mode (Power+Volume Down) and enter:
fastboot erase cache
2 - Start RUU Flash mode:
fastboot oem rebootRUU
3 - Flash the custom splash screen:
fastboot flash zip 2PSTIMG.zip
4 - Make sure that there are no error messages when flashing. If you have one, send the error you got, your operator and the model (htc_a16ul or htc_a16wl)
5 - Reboot and enjoy!
Click to expand...
Click to collapse
please send me an A16 WL RUU any region please
Team Win Recovery Project 3.x, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
#include <std_disclaimer.h> /* * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you. * */
Install Instructions:
- Make sure your bootloader is unlocked. If not, unlock it first.
- Reboot to bootloader
- Execute:
fastboot flash recovery twrp_UNOFFICIAL.img
fastboot reboot
DOWNLOAD HERE
Device trees : https://github.com/Dhollmen/Twrp_device_gauguin
TWRP manifest used : https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp/tree/twrp-12.1
Enjoy and report if there are bugs
Can I support Chinese?
qwe5121255 said:
Can I support Chinese?
Click to expand...
Click to collapse
of course
Link is broken, can you re-upload it? Thanks