Database Develop

[MOD] 2013 Droid Ultra Family Ghost Patch (obsolete)

The below information is obsolete. Please use the official obake version of CM12 for support on 2013 Droid devices.
A small patch I put together to make the new CM11 Ghost builds work (kinda) on the 2013 Droid Ultra series phones (Mini, Ultra, Maxx). It may also work for other Ghost based ROMs, but I haven't tested this.
So far, it's been lightly tested on the Droid Ultra M (Mini), and Droid Ultra Maxx. No guarantees, but it's been working okay so far for me.
Thanks to @an21281 for testing, and @mainbord for the original Droid Mini bins. Thanks also to the CM team for supporting us without even knowing it. =)
YOU ACCEPT RESPONSIBILITY FOR ALL RISKS BY CHOOSING TO USE THIS PATCH
- If it breaks your phone, you get to keep both halves. If it eats your data, not my problem. Etc, etc.
- If you are lazy or like to take shortcuts, definitely don't use this.
Requirements:
- Unlocked bootloader. Phone should be on newest stock bootloader, radio, etc. (4.4.4 currently)
- Philz recovery for ghost: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/ghost/
- CM11 Ghost: CM11 Ghost
- GApps. I use the PA Nano package: PA Gapps
Instructions:
- Boot to recovery, and wipe data and cache.
- Install CM11 Ghost, then GApps, then the patch
Notes:
- This is done in my free time, and isn't something I plan on supporting. If I have time, I may make updates.
- I'm not actually using CM11 on my phone at the moment, so can't test things currently.
- TWRP for ghost doesn't set the right properties. Go bug them.
- The huge "full" GApps packages can fill up /system and break ****.
Changelog:
0.6 - 4.4 bins
0.8 - 4.4.4 bins
** Please search the forum or Google your question before posting. Thanks! **

Thank you so much!!
Man, i kept trying to figure out how to rewrite the build.prop and change the binaries to be able to flash the ones that switched to the ghost source. I really, really, appreciate this patch. Maybe with the present state of BL unlock and the super cheap price on the maxx we will actually (for once) see a large amount of development for the msm8960dt branch and not just be limited to the ghost builds. thank you for this, again.

Thanks for taking the time to make this patch, everything has been working perfectly so far!

kitcostantino said:
Man, i kept trying to figure out how to rewrite the build.prop and change the binaries to be able to flash the ones that switched to the ghost source. I really, really, appreciate this patch. Maybe with the present state of BL unlock and the super cheap price on the maxx we will actually (for once) see a large amount of development for the msm8960dt branch and not just be limited to the ghost builds. thank you for this, again.
Click to expand...
Click to collapse
Glad to hear it's working for you.
At least as far as the Maxx goes, all the heavy lifting was done by the CM11 folks.
The patch for the maxx is one binary file for the button lights, two simple configs, and a few lines in build.prop.
I'll be curious if the patch works for the plain Ultra.

Rottgrub said:
Glad to hear it's working for you.
At least as far as the Maxx goes, all the heavy lifting was done by the CM11 folks.
The patch for the maxx is one binary file for the button lights, two simple configs, and a few lines in build.prop.
I'll be curious if the patch works for the plain Ultra.
Click to expand...
Click to collapse
Droid mini CM, keys and sound works!

This patch is going to be very useful if Lollipop is going to integrate the best of Motorola. This means I'll be able to flash CM ghost and still have native active display or whatever it is called in the Nexus 6. At that point, the customs ROMs will actually be relevant to the Moto X and Droid Maxx.
Sent from my iPad using Tapatalk

mainbord said:
Droid mini CM, keys and sound works!
Click to expand...
Click to collapse
Great! Thanks for getting the ball rolling! Guessing you figured out the camera problem you were having? (I was guessing maybe a gapps issue with the Google Camera?).

Problem with camera was in 19oct nightly, i installed 21 oct build and it works. Sorry for my english.

mainbord said:
Problem with camera was in 19oct nightly, i installed 21 oct build and it works. Sorry for my english.
Click to expand...
Click to collapse
Your English is fine. Thanks for the warning about that build date.

So when CM has a lollipop build (CM12?), we might be able to use this patch and have the Google version of Active (Ambient) Display? The only thing that keeps me from running CM is lack of a smooth working Active Display. This would be great news!

What happened to half of the pages in this thread
Sent from my XT1080 using Tapatalk

nubia11 said:
What happened to half of the pages in this thread
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I asked the mods to clean up the off topic posts. The posts removed were requests for information either already contained in the first post, or easily found with a quick Google search. Unfortunately, these sorts of posts contribute nothing to the discussion, and make it hard for readers to find actual data when/if they have problems.
That said, I'm glad people were able to help you out. Have you had any luck getting it working?

No. I'm not sure if I can use twrp ghost on my XT1080.... If so I will try it and let you / others
Sent from my XT1080 using Tapatalk
---------- Post added at 10:45 AM ---------- Previous post was at 10:44 AM ----------
nubia11 said:
No. I'm not sure if I can use twrp ghost on my XT1080.... If so I will try it and let you / others know
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Sent from my XT1080 using Tapatalk

It isn't working... Here is what I get... "This package is for device xt1056" also... Error executing updater binary in zip/sdcard/cmghost/cm-11 11 20141023-nightly..........and so on. Any ideas?
Sent from my XT1080 using Tapatalk

I'm just wondering if maybe I didn't flash something right. You would think that the patch would go first but I did exactly what was in the op
Sent from my XT1080 using Tapatalk

nubia11 said:
I'm just wondering if maybe I didn't flash something right. You would think that the patch would go first but I did exactly what was in the op
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Install Philz CWM recovery. Boot to recovery, and wipe data and cache.
Install CM11 Ghost, then GApps, and only then the patch.

Thank you
Sent from my XT1080 using Tapatalk

I'm getting flashing error

aneeshmbabu said:
I'm getting flashing error
Click to expand...
Click to collapse
Make sure you're using Philz recovery.
Sent from my XT1060 using Tapatalk

jakereeves31 said:
Make sure you're using Philz recovery.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I'm using twrp , how to flash philz recovery.. I already installed twrp.. Thanks for ur help , step wise help needed for flashing philz recovery.. My model xt1080,droid maxx

Xposed?

Is there a working Xposed for the HTC One? If so, where can I find it?
Sent from my SM-G925T using XDA Free mobile app

I also have this question?

Yes there is. I was dying without my xprivacy.
Search on here for xpsosed for lollipop. You need the arm64 file and you have to flash the xpsosed file via twrp. Just make sure you know If you need 5.1. Or 5.0 lollipop version. It's not easy as it was but you'll get it eventually. Actually, its a mfer I ain't gonna lie.
Sent from my HTC One M9 using JellyBombed Tapatalk 2

Josh McGrath said:
Yes there is. I was dying without my xprivacy.
Search on here for xpsosed for lollipop. You need the arm64 file and you have to flash the xpsosed file via twrp. Just make sure you know If you need 5.1. Or 5.0 lollipop version. It's not easy as it was but you'll get it eventually. Actually, its a mfer I ain't gonna lie.
Sent from my HTC One M9 using JellyBombed Tapatalk 2
Click to expand...
Click to collapse
How about a link to right place? I want to make sure I get to the right place...
Thanks
Sent from my HTC One M9 using XDA Free mobile app

Which version of lollipop are you running? 5.01 or 5.1. They are completely different for some reason
Sent from my HTC One M9 using JellyBombed Tapatalk 2

can't seem to get xposed to work on latest 2.7 fw build. anyone else able to flash successfully? I wait about 20 mins at bootup and just get stuck at boot screen
Sent from my HTC One M9 using Tapatalk

look up romracer version of xposed for x64bit phones also make sure sdk21 is for 5.0.1 sdk22 is for 5.1.1.
Also its a miss or hit best advice (not advise) is to reflash rom (dirty) if it do not work... filename for mine is xposed-v67-sdk-arm64-by-romracer-20150716.zip.
I am sure there is an updated one but thid worked for me so never checked...
Press thanks if I helped (could use them :good
Here is for 5.0 by revo89

SmIzUrF said:
look up romracer version of xposed for x64bit phones also make sure sdk21 is for 5.0.1 sdk22 is for 5.1.1.
Also its a miss or hit best advice (not advise) is to reflash rom (dirty) if it do not work... filename for mine is xposed-v67-sdk-arm64-by-romracer-20150716.zip.
I am sure there is an updated one but thid worked for me so never checked...
Press thanks if I helped (could use them :good
Here is for 5.0 by revo89
Click to expand...
Click to collapse
Yea that doesn't work. I think it's because I need to find a deodexed version of the stock ROM, but there's hardly any support for T-Mo.

zoome9 said:
Yea that doesn't work. I think it's because I need to find a deodexed version of the stock ROM, but there's hardly any support for T-Mo.
Click to expand...
Click to collapse
Well I have used it on viper and ICE, both worked on my tmobile m9. I am sure it would work for revolution and most other roms out there.

SmIzUrF said:
Well I have used it on viper and ICE, both worked on my tmobile m9. I am sure it would work for revolution and most other roms out there.
Click to expand...
Click to collapse
do you have VoLTE enabled with those ROMs?

zoome9 said:
do you have VoLTE enabled with those ROMs?
Click to expand...
Click to collapse
Yes on Viper just pick the t-mobile config when you flash.

Yup that's what's I'm running. Latest firmware on T-Mobile us viper Rom on 5.1 and xposed was easier than it was on 5.0 to get working

Issue with xposed CM12.1

Hello
Since 5 or 6 CM nightlies, my xposed stoped working. Every time I flashed, the cellphone boots normally and loads apps. After that its working like a normal one. A few seconds later it reboots.
Victara device, Moto X 2014, Lp 5.1
I did wipe cache and dalvik befere flashing.

DiogoNeiss said:
Hello
Since 5 or 6 CM nightlies, my xposed stoped working. Every time I flashed, the cellphone boots normally and loads apps. After that its working like a normal one. A few seconds later it reboots.
Victara device, Moto X 2014, Lp 5.1
I did wipe cache and dalvik befere flashing.
Click to expand...
Click to collapse
It would be useful to know which version you flashed. And you could post in that version's thread, rather than making your own.

ldeveraux said:
It would be useful to know which version you flashed. And you could post in that version's thread, rather than making your own.
Click to expand...
Click to collapse
V71 sdk22
Sorry, someone might move me to cyanogem or moto x and you know..

DiogoNeiss said:
V71 sdk22
Sorry, someone might move me to cyanogem or moto x and you know..
Click to expand...
Click to collapse
*sigh* Which version, ARM ARM64 or x86? Which version of the apk did you install as well? Did you install the apk? How did you flash the files? Which recovery version do you have? Is it up to date?
I'm not going to pry the info out of you, if you can't offer more than "V71 sdk22," you're not going to find much help here...

ldeveraux said:
*sigh* Which version, ARM ARM64 or x86? Which version of the apk did you install as well? Did you install the apk? How did you flash the files? Which recovery version do you have? Is it up to date?
I'm not going to pry the info out of you, if you can't offer more than "V71 sdk22," you're not going to find much help here...
Click to expand...
Click to collapse
Arm, 3 alpha 2, twrp recovery and i updated it to the newest today.

DiogoNeiss said:
Arm, 3 alpha 2, twrp recovery and i updated it to the newest today.
Click to expand...
Click to collapse
There's an alpha 4 version of the APK, no? Also I believe there were issues with the newest TWRP version, maybe roll back to the previous. But serisously, they know better in the thread dedicated to this project. Go there now.

ldeveraux said:
There's an alpha 4 version of the APK, no? Also I believe there were issues with the newest TWRP version, maybe roll back to the previous. But serisously, they know better in the thread dedicated to this project. Go there now.
Click to expand...
Click to collapse
Thanks man
I was using 2.8.60 before and the problem was still there. Ill check there now

Moto Apks [10.20.2015]

I have uploaded some of the latest system apps from the XT1541 EU model. Let me know if you want anything else specific.
Enjoy [emoji15]
https://mega.nz/#F!sZ01wBJT!Tk2skiE8JRuc7umeJWmJRw
Sent from Moto G Osprey

very nice , hope we get all apks for MotoX play also so that we can steal some features from it, if possible

Hmm
Sent from Moto G Osprey

Included moto device signature apk? (Might have named it wrong) it's the file that makes devices seem like an official Motorola device.

christopherrrg said:
Included moto device signature apk? (Might have named it wrong) it's the file that makes devices seem like an official Motorola device.
Click to expand...
Click to collapse
Ok. I've added:
https://mega.nz/#!FY8RCTiL!vF5ErV9ZICDYLXMvUuEsVHZb-tCyfUZPemzPd47O9Mo
Sent from Moto G Osprey

Sorry if this is a noob question, but can I install this apks on a cyanogen based ROM with this signature app, for example? I am currently using Resurrection Remix but I miss the Moto app so much (Moto Display and Moto Actions combined).

How do I install the apks? when I try to install them it tells me that the installation was unsuccessful

roniemeque said:
Sorry if this is a noob question, but can I install this apks on a cyanogen based ROM with this signature app, for example? I am currently using Resurrection Remix but I miss the Moto app so much (Moto Display and Moto Actions combined).
Click to expand...
Click to collapse
I'm currently trying to port MOTO display but from what I've found so far is it's multiple APKs in multiple directories so I haven't quite found them all to copy just yet.
The apps here may give you issues on CM.
Try this thread : http://forum.xda-developers.com/showthread.php?p=62823450

Also forgot to mention all custom roms have the MOTO actions built in it is now called CMactions.apk ( usually found somewhere within configuration settings. )

roniemeque said:
Sorry if this is a noob question, but can I install this apks on a cyanogen based ROM with this signature app, for example? I am currently using Resurrection Remix but I miss the Moto app so much (Moto Display and Moto Actions combined).
Click to expand...
Click to collapse
You can try. Often stock apps tend not to work on custom ROMs but please try and report back.

rodrigocc01 said:
How do I install the apks? when I try to install them it tells me that the installation was unsuccessful
Click to expand...
Click to collapse
Have you tried installing them as system apps and changed the permissions with root explorer?

am2012 said:
Have you tried installing them as system apps and changed the permissions with root explorer?
Click to expand...
Click to collapse
Ive install it as a system app via Luck Patcher but every time i restart my device it appears a popup that says APP has stopped or something like that. How do i install the apk correctly?

christopherrrg said:
I'm currently trying to port MOTO display but from what I've found so far is it's multiple APKs in multiple directories so I haven't quite found them all to copy just yet.
The apps here may give you issues on CM.
Try this thread : http://forum.xda-developers.com/showthread.php?p=62823450
Click to expand...
Click to collapse
hey, any progress on porting "MOTO display"?

bezao_ro said:
hey, any progress on porting "MOTO display"?
Click to expand...
Click to collapse
Currently with my son for Halloween this weekend so I haven't had a lot to look.
What I know of so far is it seems to consist of these two packages. ( it may include more. )
One is located in /system/app while the other is /system/priv-app
MotoDisplay_FWProxy_3.0.apk
MotoDisplay_3.0.apk

christopherrrg said:
Currently with my son for Halloween this weekend so I haven't had a lot to look.
What I know of so far is it seems to consist of these two packages. ( it may include more. )
One is located in /system/app while the other is /system/priv-app
MotoDisplay_FWProxy_3.0.apk
MotoDisplay_3.0.apk
Click to expand...
Click to collapse
when you have time, can you upload "motodisplay_fwproxy"?
sorry for my bad english :c

am2012 said:
I have uploaded some of the latest system apps from the XT1541 EU model. Let me know if you want anything else specific.
Enjoy [emoji15]
Sent from Moto G Osprey
Click to expand...
Click to collapse
can you upload MotoDisplay_FWProxy_3.0.apk?

bezao_ro said:
can you upload MotoDisplay_FWProxy_3.0.apk?
Click to expand...
Click to collapse
Sure!
https://drive.google.com/file/d/0B4Gyz91x5k7gRElybTFVUXhPWkU/view?usp=docslist_api
I put it on my Google drive for ya. This one is located in system/app not system/priv-app (for clarification.)

That app must not work. Does the file name clash with an existing one?

[Q] Debloated stock MM ROM?

Hello over here and there!
Recently I've bought this gorgeous phone and really loved it (after oroginal Moto G)
But I'm really disappointed with the software side: it has a ton of gapps, that cannot be uninstalled which really disappoints me
So I'm asking if someone could/would/already done a debloated flashable ZIP of MM ROM for XT1095?
I remember being with my Moto G, we had a great developer - mr. lost101. And this is an example of his work: http://forum.xda-developers.com/moto-g/development/rom-identity-crisis-6-t3324595
Plz, make it happen!
Peace

borisevstratov said:
Hello over here and there!
Recently I've bought this gorgeous phone and really loved it (after oroginal Moto G)
But I'm really disappointed with the software side: it has a ton of gapps, that cannot be uninstalled which really disappoints me
So I'm asking if someone could/would/already done a debloated flashable ZIP of MM ROM for XT1095?
I remember being with my Moto G, we had a great developer - mr. lost101. And this is an example of his work: http://forum.xda-developers.com/moto-g/development/rom-identity-crisis-6-t3324595
Plz, make it happen!
Peace
Click to expand...
Click to collapse
There is already I script in the development forums that cleans it up. It was made for 5.1. But people have used it successfully with 5.0 and 6.0 also.
Sent from my XT1095 using Tapatalk

AGISCI said:
There is already I script in the development forums that cleans it up. It was made for 5.1. But people have used it successfully with 5.0 and 6.0 also.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yeah, just found that now — NoMoto debloat script. I think that kinda solved my problem!

If that doesn't do everything youd like it to do, install Parcel Backup and Restore and remove the Apps you no longer want.
You need Root and Busybox, but it works well. I got rid of all the Gapps and a bunch of moto junk too. Slimmed out my Stock MM.
Sent from my XT1095 using Tapatalk