Database Develop

HD Hybrid to EMMC - no recovery

Was running CM10.1 HYBRID
Went to 10.2 EMMC and cannot access recovery from EMMC - If i put the SD card back can get into recovery from there
Otherwise all works fine
Any ideas how to fix ?
TIA

Unless you flashed a custom recovery to emmc, there is only stock recovery there.
Once you have flashed a custom recovery to internal, just boot and hold the power and n buttons very briefly. Release the power button before it turns itself off. That will put you into recovery (either stock or custom depending on which you have installed)
Sent from my BN NookHD+ using xda premium

Thanks for reply
Here is recover log when I try and flash TWRP
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/0/TWRP/.twrps'.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/3024760203024104'
I:Version number saved to '/cache/recovery/.version'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/emmc/twrp-recovery-ovation-4.zip'...
Checking for MD5 file...
I:Cannot find file /emmc/twrp-recovery-ovation-4.zip.md5
Skipping MD5 check: no MD5 file found.
script aborted: assert failed: getprop("ro.product.device") == "ovation" || getprop("ro.build.product")
== "ovation"
assert failed: getprop("ro.product.device") == "ovation" || getprop("ro.build.product")== "ovation"
E:Error executing updater binary in zip '/emmc/twrp-recovery-ovation-4.zip'
Error flashing zip '/emmc/twrp-recovery-ovation-4.zip'
Updating partition details...
E:Unable to mount '/bootdata'
I:Actual block device: '/dev/block/mmcblk0p6', current file system: 'vfat'
Iata backup size is 576MB, size: 12977MB, used: 922MB, free: 11906MB, in data/media: 345MB.
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'

I know nothing about TWRP. Try CWM.
Sent from my BN NookHD+ using xda premium

Once I got CWM for the right device
it worked!
thanks for your help

[Q&A] [ROM][5.0.2][TITAN]RESURRECTION REMIX_lp[WIP][CM12]

Q&A for [ROM][5.0.2][TITAN]RESURRECTION REMIX_lp[WIP][CM12]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][TITAN]RESURRECTION REMIX_lp[WIP][CM12]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

found a small problem when playing videos, they reproduce in slow motion most of the time .. sorry my English, I am Brazilian ..

Rom is very nice, smooth and fast, great work!
Please put option to select Sim1 and Sim2 ringtones separately like BlissPop Rom

How to disable bold font on settings?
Sent from my Moto G 2014 using XDA Free mobile app

UI crashing on last REsurrection ROM Update
The UI is crashing when I change the phone position from vertical to horizontal on gallery and other apps.
I am talking about the last ROM update Resurrection Remix Lollipop 5.0.2 - v5.3.8

ROM 5.3.8, clean Flash
Swipe-Gesture doesn't work on AOSP-Keyboard
A:http://forum.cyanogenmod.org/topic/103962-no-gesture-typing-in-aosp-keyboard/

TheSword75 said:
The UI is crashing when I change the phone position from vertical to horizontal on gallery and other apps.
I am talking about the last ROM update Resurrection Remix Lollipop 5.0.2 - v5.3.8
Click to expand...
Click to collapse
I have also noticed.

Restart
Včera 2x při volání

Restart when calling 3x, 1x changing
wallpaper

heyy wen i flash this rom in TWRP
it shows an error to me nd shows failed
please help me how to install this rom

Last two builds fail when trying to flash? I'm on xt64/TWRP.
Sent from my Moto G 2014 using XDA Premium 4 mobile app

cant flash it...(
Hey @varund7726 bhai. First of all thnx work bringing RR for moto g the problem is i tried flashing it after clearing dalvik, data, system and cache but the status said failed.......i m using xt1068, twrp 2.8.5.0 also providing you the log.....
Iperation_start: 'Flashing'
Installing '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
script aborted: This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'
Error flashing zip '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'
Updating partition details...
Iata backup size is 0MB, free: 6066MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log

lolsinnerlol said:
Hey @varund7726 bhai. First of all thnx work bringing RR for moto g the problem is i tried flashing it after clearing dalvik, data, system and cache but the status said failed.......i m using xt1068, twrp 2.8.5.0 also providing you the log.....
Iperation_start: 'Flashing'
Installing '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
script aborted: This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'
Error flashing zip '/sdcard1/cm-Resurrection_Remix_LP_v5.3.9-20150320-titan.zip'
Updating partition details...
Iata backup size is 0MB, free: 6066MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Click to expand...
Click to collapse
Here's your error
This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
This package supports bootloader(s): 0x4882; this device has bootloader 0x4807.
Upgrade your bootloader to lollipop

One Question... Is in the new 5.1 Build Dual Sim full functionelly on my XT1068?

1) Can someone help me and explain what this vertical white line on the top of my lock screen is? Only appears when locking the phone. See attached screenshot.

ronnycoleman said:
1) Can someone help me and explain what this vertical white line on the top of my lock screen is? Only appears when locking the phone. See attachment.
Click to expand...
Click to collapse
most likely the carrier label with no carrier name so it's just the separator there

HouseBreaker said:
most likely the carrier label with no carrier name so it's just the separator there
Click to expand...
Click to collapse
Ah thanks. Seems the sim card somehow wasn't unlocked. After rebooting I entered my pin and the carrier name appeared.
But is there a chance to deactivate the info for a (missing/not inserted) 2nd sim card on the lock screen?

Hey, excelent rom and work, loving 5.1 with this custom.
Just one bug I have found and searched for without results: Music app FC when playing anything. I clean flashed and everything else is working fine (xt1068). Has someone faced this bug?
---------- Post added at 06:51 PM ---------- Previous post was at 06:40 PM ----------
ronnycoleman said:
Ah thanks. Seems the sim card somehow wasn't unlocked. After rebooting I entered my pin and the carrier name appeared.
But is there a chance to deactivate the info for a (missing/not inserted) 2nd sim card on the lock screen?
Click to expand...
Click to collapse
Yeah, that bar its annoying, but there is no mod for disabling it in settings
BTW, I see on your screenshot you have the same bug as me: Double network icons. This shouldnt happen, one should be there and the other one should be an unused SIM icon that actually can be hidden (on Configurations/UI/StatusBar/Show empty SIM icons). Dont confound, this last setting doesnt change the lockscreen bar you are talking about, I was just describing the two icons bug

Jeees! Best rom eva! Thx

Also I noticed that some apps are crashing sometimes when minimizing (using back/return navigation button)...never happened on stock rom. I think I'll have to collect the crash logs then..

[Q] Error while updating to lollipop

After waiting a bit for updating my XT1068 in order for xposed to stabilize a little, dispose a bit of time to do things calmly and such, today I tried to apply the OTA update my phone was suggesting me since several weeks ago.
My device is rooted, has TWRP recovery, xposed, stock rom of KK. However when updating to 5.0 on recovery something fails with this error:
Code:
I:Inserting 'install /cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'
I:Copying file /cache/recovery/log to /cache/recovery/last_log
tw_get_context got selinux context: u:object_r:fuse:s0
I:Got default contexts and file mode for storage files.
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/0/TWRP/.twrps'.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/ZX1D22BGJ8'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:TWFunc::Fixup_Time: Pre-fix date and time: 2015-03-12--07-40-09
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: Date and time corrected: 2015-03-12--07-40-10
I:Switching packages (TWRP)
I:Set page: 'action_page'
I:operation_start: 'OpenRecoveryScript'
Processing AOSP recovery commands...
I:command is: 'install'
I:value is: '/cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
Installing '/cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
installing gptupgrade updater extensions
file_contexts path is present in /tmp/file_contexts
mount point :/system location: /dev/block/platform/msm_sdcc.1/by-name/system , file system type :ext4script aborted: Package expects build fingerprint of motorola/titan_retaildsds/titan_umtsds:4.4.4/KXB21.85-23/19:user/release-keys or motorola/titan_retaildsds/titan_umtsds:5.0.2/LXB22.46-28/28:user/release-keys; this device has Motorola/omni_titan/titan:5.0.2/LRX22G/f5a9f2c204:eng/test-keys.
Package expects build fingerprint of motorola/titan_retaildsds/titan_umtsds:4.4.4/KXB21.85-23/19:user/release-keys or motorola/titan_retaildsds/titan_umtsds:5.0.2/LXB22.46-28/28:user/release-keys; this device has Motorola/omni_titan/titan:5.0.2/LRX22G/f5a9f2c204:eng/test-keys.
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'
E:Error installing zip file '/cache/Blur_Version.21.11.23.titan_retaildsds.retaildsdsall.en.03.zip'
Done processing script file
In what comes to android internals like this I'm more like a plain user than anything else. So far seems that something on the release keys of my phone isn't what the update zip or whatever expects, or that's what I've figured up so far.
Now, what can I do in order to update to 5.0? Do I look for a 5.0 stock rom and flash on top or do I have to change some config / file on my device?
If the thing comes to flashing, are stable enough the non-stock Lollipop roms around here to be used daily?
Thank you all in advance. Hoping that I've asked properly.

You cant do an OTA update from Motorola with a rooted phone. See this thread and read all the posts http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682

Yeah, that makes sense. Thank you.

[Q&A] [RECOVERY] Safestrap Recovery v3.7x [05/15/2014 V3.73 - TWRP 2.7]

Q&A for [RECOVERY] Safestrap Recovery v3.7x [05/15/2014 V3.73 - TWRP 2.7]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] Safestrap Recovery v3.7x [05/15/2014 V3.73 - TWRP 2.7]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

can't flash or restore any rom into stockslot with SS 3.75
here's what SafeStrap log says:
ApplyParsedPerms: lsetfilecon of /system/usr/iku/isu to ubject_r:system_file:s0 failed: Operation not permitted
ApplyParsedPerms: chown of /system/usr/iku/isu to 0 failed: Operation not permitted
ApplyParsedPerms: chgrp of /system/usr/iku/isu to 0 failed: Operation not permitted
ApplyParsedPerms: chmod of /system/usr/iku/isu to 420 failed: Operation not permitted
ApplyParsedPerms: removexattr of /system/usr/iku/isu to 0 failed: Operation not permitted
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/download/cm-12.1-20150413-UNOFFICIAL-umts_spyder.zip'
Error flashing zip '/sdcard/download/cm-12.1-20150413-UNOFFICIAL-umts_spyder.zip'
Updating partition details...
E:Unable to mount '/cache'
I:Actual block device: '/dev/block/mmcblk1p21-orig', current file system: 'ext2'
E:Unable to mount '/osh'
I:Actual block device: '/dev/block/mmcblk1p23', current file system: 'ext2'
I:Updating /etc/fstab...I:Fstab: Adding /dev/block/mmcblk1p25 /sdcard vfat rw
I:Fstab: Adding /dev/block/mmcblk0p1 /sdcard-ext vfat rw
I:Fstab: Adding /dev/block/mmcblk1p24-orig /data ext3 rw
I:Fstab: Adding /dev/block/mmcblk1p21-orig /cache ext2 rw
I:Fstab: Adding /dev/block/mmcblk1p20-orig /system ext3 rw
I:Fstab: Adding /dev/block/mmcblk1p23 /osh ext2 rw
I:Fstab: Adding /dev/block/mmcblk1p20-orig /systemorig ext3 rw
I:Fstab: Adding /dev/block/mmcblk1p25 /ss vfat rw
I:Set page: 'flash_done'
active fb swap failed: No such device
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'wipe'
I:Set page: 'advancedwipe'
I:Set page: 'action_page'
I:wipe list 'DALVIK;/and-sec;/data;/cache;/system;'
I:wipe_path 'DALVIK'
E:Unable to mount '/cache'
I:Actual block device: '/dev/block/mmcblk1p21-orig', current file system: 'ext2'
E:Failed to wipe dalvik
Updating partition details...
E:Unable to mount '/cache'
I:Actual block device: '/dev/block/mmcblk1p21-orig', current file system: 'ext2'
E:Unable to mount '/osh'
I:Actual block device: '/dev/block/mmcblk1p23', current file system: 'ext2'
I:Updating /etc/fstab...I:Fstab: Adding /dev/block/mmcblk1p25 /sdcard vfat rw
I:Fstab: Adding /dev/block/mmcblk0p1 /sdcard-ext vfat rw
I:Fstab: Adding /dev/block/mmcblk1p24-orig /data ext3 rw
I:Fstab: Adding /dev/block/mmcblk1p21-orig /cache ext2 rw
I:Fstab: Adding /dev/block/mmcblk1p20-orig /system ext3 rw
I:Fstab: Adding /dev/block/mmcblk1p23 /osh ext2 rw
I:Fstab: Adding /dev/block/mmcblk1p20-orig /systemorig ext3 rw
I:Fstab: Adding /dev/block/mmcblk1p25 /ss vfat rw
I:Set page: 'action_complete'
I:Set page: 'clear_vars'
I:Set page: 'advancedwipe'
I:Set page: 'wipe'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /sdcard/recovery.log

[q&a] [rom][5.1.1][blisspop][official][cancro]

Q&A for [ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Error installing ROMs
Hi all,
I got error blkdiscard failed invalid argument while flashing [ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Many said that I had to extend partition to 1.2GB, which I already did.
Here is what I have did before
-[ROM][5.1.1][CANCRO UNOFFICIAL] Resurrection Remix LP
-script extend partition
-flash TWRP
all step above failed to install[ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO] and also
[ROM][5.1.1][UNOFFICIAL] GZR Validus ROM V8.0 [R2,2015-06-09]
Here is my log from TWRP
PHP Code:
Installing '/sdcard/Custom_rom/[ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
Patching system image unconditionally...blockimg version is 2
erasing 318848 blocks
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/[ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Error flashing zip '/sdcard/[ROM][5.1.1][BLISSPOP][OFFICIAL][CANCRO]
Updating partition details...

when i want to get the logcat on my mi4...
i got this tips "Unable to open log device 'main'" , is this a bug?

when will the new build come without sod ?
or if i install the current build and dont use ambient display will it solve the sod issue?

Thanks! Works fine
But lockscreen rotates even when "lockscreen" rotation is disabled

Can't install
Am on stock partition I can't install it and it gv me error status 7 plz can u say solution

please help me!!! I'm flashing the ROM is fail . E:Error executing updater binary in zip '/sdcard/XXXX.zip. My Device: Xiaomi mi4 .:crying::crying::crying:

Plz help
zip not installed. twrp shows error executing updater binary installation aborted. plzzz helppp!!!

Flashed .. Working super cool...
Experiencing awesome customization... Kudos..
Really need camera app .. No camera app .. Tried google camera error says can't connect to the camera.. And FM app...
Do pleas help to flash these two apps
---------- Post added at 10:44 PM ---------- Previous post was at 10:40 PM ----------
sumitk3 said:
zip not installed. twrp shows error executing updater binary installation aborted. plzzz helppp!!!
Click to expand...
Click to collapse
Problem is because of partition
Hey guys you just need to flash extended partition script or modify partition through adb... You can find it in XDA forum...

Error flashing, HELP!!
Hi, I had the 2.2 version installed, I installed other ROM and when I try to flash the new Blisspop 3.5v with CMW in my Mi 4, I have an error (Status 7) or (Status 6). I tried to change the boot.img for other one than works, but it does not flash... Anyone knows why this happens?
Apology for my english :///

Heeeeelp!!!
I can't flash? Have i got to format system 2 or delete it? Pls I need an answer (((((

sergio_gnzlz said:
I can't flash? Have i got to format system 2 or delete it? Pls I need an answer (((((
Click to expand...
Click to collapse
Have you repartitioned it to 1.2 GB it wont install on stock partition. If you dont know how to repartition search on miui forum there zip files are provided
---------- Post added at 11:04 AM ---------- Previous post was at 10:47 AM ----------
Using this rom from 2 days, highly customizable, stable rom, slightly sluggish as compared to ivans but in day to day use u wont even notice. Can be used as daily driver if you dont bother about following issues
Few concerns need to be adressed-
1. Battery drain is faster than other roms. was expected as it is CM based rom and I have made lot of customizations but hey, more the merrier....
2. Camera app- Must needed as not a single app works
3. Mobile network issue- Reboot results in no network or no sim card error- workaround is mentioned in other posts- Airplane mode-ON, reboot, turn airplane mode OFF. Not sure if during sleep the phone results in not reachable to the caller.
4. Not sure about X-posed framework- can anyone update if this rom supports Xposed and Xmod games
5. Quick setting panel/notification panel dropdown is must on lockscreen and with torch support (I guess if you fix camera, torch will also work)
Thankfully no SOD or call bug in latest release of 24th June
Will wait for another 3-4 days if no update to above issues will shift to omni or CM12.1 temasek

Camera still not working
Hi Jackeagle,
Camera issue is still there even in the latest July versions also. Please do something. We love your rom

Error executing install script in BlissPop-v3.6-cancro-OFFICIAL-20150708-1540
Hi,
I have just tried to install your ROM on my cancro device. I followed all the steps.
However, everytime I try to flash the ZIP through TWRP, I get a message in red, saying that there wasn and error executing install script in BlissPop-v3.6-cancro-OFFICIAL-20150708-1540
And the flash fails. What am I doing wrong ?
Here's the log:
Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
******************************************
* BlissPop Rom
******************************************
* Created By TeamBliss
******************************************
* Build date: Wed Jul 8 15:42:18 PDT 2015
* Device: MI 3W (cancro)
******************************************
{*} Running backup scripts...
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 3
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
{*} Done.
blockimg version is 2
erasing 318848 blocks
{*} Following operation takes time, please wait...
{*} Installation is block based
Patching system image unconditionally...
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'
Error flashing zip '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'
Updating partition details...
Iata backup size is 0MB, free: 11416MB.
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Verifying zip signature...
I:read key e=3 hash=20
I:read key e=65537 hash=20
I:read key e=65537 hash=20
I:read key e=65537 hash=20
I:4 key(s) loaded from /res/keys
I:comment is 1738 bytes; signature 1720 bytes from end
I:whole-file signature verified against RSA key 0
Zip signature verified successfully.
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
minzip: Extracted 4 file(s)
******************************************
* BlissPop Rom
******************************************
* Created By TeamBliss
******************************************
* Build date: Wed Jul 8 15:42:18 PDT 2015
* Device: MI 3W (cancro)
******************************************
{*} Running backup scripts...
detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 3
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
{*} Done.
blockimg version is 2
erasing 318848 blocks
{*} Following operation takes time, please wait...
{*} Installation is block based
Patching system image unconditionally...
script aborted: blkdiscard failed: Invalid argument
blkdiscard failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'
Error flashing zip '/sdcard/BlissPop-v3.6-cancro-OFFICIAL-20150708-1540.zip'
Updating partition details...
Iata backup size is 0MB, free: 11416MB.
I:Unable to mount '/usbotg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log