Related
I have been asked by @ZEROLEMON_OFFICIAL to start a thread for the purpose of posting reviews of their Ultra Glass Armor 9H tempered glass screen protectors for the HTC M8.
***DO NOT START A SEPARATE THREAD FOR THE PURPOSE OF WRITING YOUR OWN REVIEW. ALL REVIEWS OF THIS PRODUCT SHOULD GO IN THIS THREAD ONLY. ALL OTHERS WILL BE REMOVED BY THE MODERATION TEAM***
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged and included everything to install the screen protector. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Magnum_Enforcer said:
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Click to expand...
Click to collapse
Thanks for your feedback. The pull tab-style sticker should be able to stick on the film so the film will be easy to peel off. Maybe you are just unlucky, sorry. Below is the revised version of instruction which will be applied to the new batch.
1.Please wipe off all fingerprints and oil stains from the screen with the included alcohol swab. Wipe the screen with the included microfiber cloth for drying.
2.Place phone on flat surface with screen facing up. Peel the first plastic adhesive off and align the screen protector edge with the phone's edge.
3.Gently place the screen protector on the screen. The screen protector will automatically adhere to the surface of the screen.
4. If there are bubbles between the screen protector and the phone, please use a flat card to gently push out the bubbles to the edge of the phone.
5. Installation complete.
Those instructions are much better:good:
OMG INCREDIBLE!! Of all the shields I have had, this is surely my last from anyone. I am sticking to Zerolemon from now on. My other shields was fingerprint magnets, not this one. Easy to put on, and thinner than any other shield. Here is my 5 Star review from Amazon:
""I got the shield today, it was a snap to install. Thinner than my Chinese shield, and surprisingly almost fingerprint proof. The one thing I hated about my last shield was it attracted all my fingerprints. I always was cleaning it. But this one doesn't seem to even know my fingers even touched it. I can see the prints after heavy use, but so easy to clean, and barely visible, it is remarkable. This has got to be the best shield out there. And I have had one on all my phones. But now, this is probably going to be the only one I will have in the future. It's like touching the glass without any shield. Only con is that it seems to attract dust. But given that it is so invisible to the sight and touch a little POOF and no dust at all, I think it is static, because it is new, and will soon wear off. But if you need a shield, heck, YOU DO NEED A SHIELD!! This is the one to buy...""
This has attracted my attention. It is the best one I have ever had on any of my phones. (Now if you can make those camera lens covers from this material, I would be extremely happy) :laugh:
I received mine on Saturday. Beautiful packaging. The instructions where a bit on the small side, but its pretty self explanatory. The application went well enough, but keep in mind that this glass seems to be cut exactly the same size as the glass on the M8. So when you start to apply it make sure it starts exactly where it does on the phone. If you are even a little pulled away from the start of the glass on the opposite side of the glass it wont stick down because it will be slightly on the speaker grill. After getting that straightened out it looks incredible. For the price you cant go wrong.
Anyone who knows how to take care of a phone knows you need a screen protector.
Scratch proof glass just isn't after enough time has passed. But there's a reason manufacturers stick with glass for screens. It's tactile, your finger glides over it with silky precision. It gives the phone a solid and dependable touch to it. A solid reassurance. Most importantly, glass gives the best transmission of light from the underlying pixels so it makes the display look vibrant.
Then you have to slap some cheap plastic on top of it, This was far easy to apply to the phone. The glass and the phone join together like magic, after you have aliened it over the phone the two bond together, the Best part is there isn't a bubble beneath it, which I can't stand in plastic screens.
This is a revolutionary product. I love it. There are only a few cons to having this is an ever so slight increase in thickness in your phone. Plastic screen protectors are negligibly thick but glass has to be a bit thicker to be effective. Personally, I like the added thickness, modern phones are, to me, increasingly flimsy feeling. This gives it a bit more substance (My case still fits without issues as-well). I have also found 2 out of 4 corners are a little sharp and could of been slightly more rounded.
Overall this is one amazing screen protector and I look forward to showing it off on my phone.
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I have had the Nilkin on my M8, saved the screen when it fell on the floor when I was in the doctors office. But it was thicker, and always showed my fingerprints. This screen (Even though I didn't pay for it) is the best I have had. I have had tempered glass on my screens for a couple years, almost always the cheap ones from China that takes 6+ weeks to get here. This one is local and cost is similar, would I have bought it? I don't normally shop Amazon, so unless it was on eBay I probably would not, unless I seen it on someones device, or at least heard good news about it. I didn't even know that the glass resist fingerprints. Would I but another? Yep... I have already showed it to a friend, and she is going to get her M8 this weekend and order this shield. Because it is a lot better than the one on her M7. So even though you might think that the review is biased because it was free, it isn't. It is a good shield and not bad on the price either.... :good:
I got mine in the mail today.
1. It is awesome. It covers the entire glass portion of the front of the phone. Not just the active LCD area.
2. It is extremely smooth. This makes it feel as if it is not there.
3. It's oleophobic coating is superb. Haven't seen a single finger print.
4. It is extremely clear, I cannot tell it is there.
5. I have it paired with the Otter box symmetry case and feel as if my phone has the ultimate protection.
6. The only draw back was during the installation I kept getting a raised corner. This was because Tue glass is cut to very small tolerances and matches the M8's screen perfectly. I had to slow down and focus on what I was doing.
All in all I am pretty happy with it and will be buying a second one to keep as a backup. I see this protector lasting the life of phone and keeping the resale value in since the screen will be in perfect condition whenever it is peeled off.
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I understand your concern. We are sending free samples in exchange for an honest review. We do not send samples to everyone, only legit users. You guys are welcome to compare our screen protector with other brands.
I have received my tempered glass protector from Zerolemon. Before I start I'll say that it was sent for review on condition that I review it. They told me to make an honest review, and never set any guidelines which leaves me to do and say whatever I'd like. I am in no way obliged to give a good review as they have nothing on me and have not told me otherwise.
The protector arrived in excellent, eco-friendly packaging that was simplistic yet effective in explaining what the product is and how to install it. Right away I could tell that the glass protector was of good quality and not simply a Chinese knock-off. I have used dozens of protectors including Spigen's $40.00 Nano slim, and this is comparable, if not better given the price.
The protector installed without a hassle, and aligned IDENTICALLY with my screen. The cut-out is perfect unlike other protectors, and offers maximum coverage with no exposed areas of the screen.
Included in the package are an anti-bacterial wipe and cloth to make sure you screen is very clean before installation. Once done, you take off the back film from the glass protector and simply let it adhere to the screen of your M8.
Again, this review was is in no way dictated by ZeroLemon, and I could of written anything I wanted. In fact, I already had another tempered glass protector installed so I didn't even need a 'free sample'.
I give this product a 10/10 simply because it's of top quality, and for the price, you cannot beat it.
I have recently received an ultra glass 9h tempered glass screen protector from zerolemon about a week ago. Upon first glance the packaging is well put together with the screen protector placed securely inside. The packaging comes with the tempered glass protector, a microfiber cloth, and an alcohol wipe to clean the screen off. The directions can be kind of confusing if you have never applied a screen protector or a glass screen protector before as they seem to be worded weird. If you apply to protector properly it looks extremely nice and feels as if there were no protector on it. The one thing I do not like about this glass protector is that it is a little on the thick side. With a case on the phone thou you don’t really notice how thick it is, but I do not use a case so I can feel the thickness of the protector. Without the case I need to be more careful when I put it and pull it out of my pocket to make sure that it doesn’t peel off or catch on the inside of my pocket. I have also noticed that this protector can have a little bit of glare in direct sunlight or light unlike the screen with no protector on it but it’s not that bad. All in all this a fantastic screen protector and for $8.99 you can’t really beat the price for any other screen protector, especially a glass protector. I would recommend this protector to anyone who wants to get a glass protector and give it shot!
What is the thickness of the protector?
suparnemo said:
What is the thickness of the protector?
Click to expand...
Click to collapse
0.3 I believe.
Sent from my HTC One_M8 using Tapatalk
Real World Use - PASS!!!
Ok, i was normally running naked since i've had my m8 and got a .10 cent chine film screen protector for a while but it fell off on one of my trips to the beach. I contacted zerolemon to inquire upon the free product.
Fast forward a week and i got it 3 days ago. Putting it on was a snap, its very precise with its cuts. My crappy chinese case was very close to not fitting but it did with a little adjusting.
Now yesterday at santa cruz my girlfriend put our phones on trunk lid area while we grabbed our stuff. She grabbed her phone and we started closing the lid and foolishly we slammed the trunk 2 times. i eventually notices my phone and immediately freaked out, but fortunately the only cracks was 3 in diff areas, and my actual screen was unharmed. If it wasn't for this product i would have a cracked phone right now and im still rocking my slightly cracked glass armor until i order a new one soon.
I'm giving this screen 10/10 across everything just for saving my ass. I highly reccomend this screen
Now that is a test I don't want to try. LoL
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
just lou said:
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
Click to expand...
Click to collapse
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Oditius said:
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Click to expand...
Click to collapse
Unbelievable. A "temp" review? Why not let people review the item after they actually use it, instead of telling people to leave 5 star reviews for an item they don't even have yet?
I wanted to let everyone know that I was given a ZeroLemon Ultra Glass Armor - 9H Premium tempered glass screen protector for my HTC one M8 in exchange for this review.
Now with that out of the way on with the review! The packaging at first glance was nice. It was not flashy with lots of colorful pictures. It has a plan covering almost like a paper bag but slightly lighter. The ZeroLemon logo is at the top, and has icons on the front displaying the features of the 9H. The inside of the packaging was professionally done. The 9H was on one side, and an alcohol swab and microfiber cloth were in a pocket on the other. I get the impression that the packaging was designed so that it can take impacts, and the 9H would still be protected. I removed all of the contents out of the packaging, and here is where I found an issue. The instructions for installation were in boxes behind the 9H. They have a small picture with text underneath. Each box is assumed to be a step in the installation process. I read through each step, and I was not sure what I was reading. It was like it was written in another language, and then translated to English. Just to give it the benefit of the doubt, I re-read all of the instructions, and came to the same conclusion; however, I have install dozens of screen protectors, so I figured how hard could it be.
I have a process for installing screen protectors using a hot shower to remove dust particles from the air in the bathroom. Generally, this method has served me well for getting a dust free lint free application of a screen protector, so I decided to use this method for applying the 9H. I went through my normal process, and when it was time to put the 9H on, I was very surprise how easy it was to line up and get it perfect on my screen. Because it is tempered glass, I could hold it from one end, and move it any way I wanted to. I also did not get any finger prints on the bottom of the 9H because it was rigid. After it was on and centered, I had decided that was the easiest screen protector I had “EVER” installed. At first there were a lot of small air bubbles under the screen. I kept working on pushing them out. I was a little worried because I could not get them all out. By the next day I still had some, but eventually I worked them all out. After inspecting the 9H on my M8, I could not see any imperfections. I thought it was a clean install; however, I found a small piece of lint close to the bottom of the screen. One thing about the 9H is that even with the small piece of lint, there was no air bubble around it. I don’t think I would have found it if I had not been specifically looking for it. I could not find any other imperfections in the installation.
The 9H is thicker than the last screen protector that I had, so you will need to be aware about this. I use a Seidio Surface case, and it was a little loose with my old screen protector; however, it is now a snug fit. I actually like the Seidio Surface case more now with the 9H on as I thought it should have been a better fit than it did. The surface of the 9H is very smooth, and I can’t tell I have a protector on it. It is not holding finger prints like my last protector did, and I have to admit that ZeroLemon’s claim of turning your screen into an “Anti-fingerprint ‘Oleophobic’ display” is true! The 9H does resist oil and finger prints like no other protector I have ever used. One thing to note is that the 9H is very reflective. You will get reflections off of any light source, but the screen clarity is extremely good.
My overall assessment of the 9H is excellent. The packaging could use a little work as far as the instructions go, but the rest of the packaging was very professional if a little plain. Installation was a snap that easily beat all other screen protectors on ease of installation that I have ever used. The 9H is a little thicker which could impact what case you are using so be mindful about that. Screen clarity is fantastic and the ability to resist oil and finger prints leaves the screen clean most of the time (ie no more wiping your phone on your shirt of pants..yuck). The 9H is not an anti-glare protector, so you will have to deal with the reflective surface; however, I think this is minor compared with the benefits the 9H brings to the table.
Well, that is my review; I hope it has been helpful. I plan on using the 9H as my daily driver. I normally use an anti-glare protector, but I am so impressed with the clarity, oil & finger print resistance that I am going to keep using it. Oh, other reasons to keep using it would be the protection from impacts, drops, and scratches; however, I have not encountered any of those since using this screen protector, so I did not include it in my review. Let me know if you have any questions. Thanks.
Rob
Here is my review of It
Here is what stood out to me on this overall exceptional screen protector.
1. The Fit- This is an exact fit of the screen on some glass protectors like my Mime glass there is a 0.5 mm or so border that makes installation easier, there is no such boarder on this protector which I think is good overall because it makes the phone look and feel better due to the screen protector covering 100% of the glass.
2. Installation- Even with the exact fitting glass the install is easy like most glass protectors. The way I install screen protectors is the hinge method, which makes lining up the glass go perfect every time, just look up "glass screen protector hinge method" on YouTube and you will see what I am talking about. After I got the screen protector on I just pressed out some tiny bubbles around the edges and I was good to go. Also the box comes with everything that you would need to get your screen clean.
3. Using my phone- Because this is a glass screen protector there is nothing to talk about clarity wise as it is perfectly clear. For fingerprints I would say that it is better than the naked screen but will still get fingerprints, they are very easy to wipe off and it is nowhere near the fingerprint magnet that some plastic screen protectors can be.
ZeroLemon is now my favorite brand of screen protectors I can't believe that I spent so much on Mime screen protectors when these are such a better value and quality.
Free for reviews aside-is it actually a good screen protector? My Nilikin has a chip on the corner and is starting to get cracked, so I like the idea of a cheap one with a lifetime warranty.
DevenStonow said:
Free for reviews aside-is it actually a good screen protector? My Nilikin has a chip on the corner and is starting to get cracked, so I like the idea of a cheap one with a lifetime warranty.
Click to expand...
Click to collapse
ok, so you think just because we got a free screen protector we are simply saying it is good as "Payment?" I like how people review it and say it is good and then get asked if it is really good... Sorry, just kinda annoys me.
That aside, I actualy like this one more than my Nilikin. with in a couple weeks my nilikin had a couple small chips. so far this one is chip free, but It is only a few days on my device... Time will tell to this. The nilikin was just a touch smaller than the glass screen, just a small border mainly top and bottom, but the zero lemon fits PERFECTLY. I could see this being an issue if you are not good at putting on a screen protector, but for most of us slightly anal retentive people it is freaking great.
DevenStonow said:
Free for reviews aside-is it actually a good screen protector? My Nilikin has a chip on the corner and is starting to get cracked, so I like the idea of a cheap one with a lifetime warranty.
Click to expand...
Click to collapse
I have had mine on a little longer, and I really like it. My Nilikin was a fingerprint magnet, this one resist them. I will admit my Nilikin did protect my screen when I dropped it, it took the crack and not my screen. Will this one do the same? I believe it will, but I won't purposely drop my phone to find out. And it fits perfect, edge to edge. Where the Nilikin was a little smaller. I am ordering one for my wife's M8. Less expensive and lifetime warranty.. How can you beat that?
DevenStonow said:
Free for reviews aside-is it actually a good screen protector? My Nilikin has a chip on the corner and is starting to get cracked, so I like the idea of a cheap one with a lifetime warranty.
Click to expand...
Click to collapse
My review is genuine. Just because we got a $9 screen protector for free does not mean we owe them anything other than the review we promised we would give them. If the 9H was worthless, I would have said that, but that is not the case. I spent my time to change a perfectly good screen protector, make notes and write the above review. I didn't do it to get a free screen protector that would only cost me $9. My time is worth more than that. I did it because I thought it would be a cool thing to do. If people don't believe my review is real, that is their problem as I reviewed it as I saw it. The 9H is really as good as I reviewed. :good:
Thread Closed in accordance with XDA Forum Rule #7
7. Do not spam, sell or trade on the forums.
If you wish to advertise a product, simply contact us. We can provide ads but you are not permitted to just post it in the forums. If you do, it will be removed and you're likely to receive a ban.
On the 30th Nov 2012 the Marketplace closed. The buying, selling, trading and / or exchanging of any item is now prohibited on XDA, in any forum or via Private Messages. We now use www.swappa.com
Click to expand...
Click to collapse
I've had my Note 8 for 9 days now and while I was thinking about buying a screen protector when it arrived, I must admit that I'm quite impressed by the quality of the screen. It just feels so hard to scratch, so much so that one would probably struggle trying to scratch it even on purpose. I don't really see myself scratching it by accident anytime soon, although I must admit I'm this kind of guy who never drops the phone and handles it with extreme care.
I'm just curious to read what you guys think, maybe somebody persuades me to buy a screen protector after all, who knows.
The Gorilla Glass 5 is more shatter-resistant than previous versions and that means it is softer also. I had my Note 7 only a few days before it started picking up micro scratches on the front and back. Your mileage may vary. I'm putting on a Whitestone done and a skin on the back of mine.
I bought a screen protector but am debating putting it on. I may try it and see how it goes
Many of us do fine with no protection. Others report getting scratches no matter how hard they try not to.
I've always put a protector on my previous phones but I'm using my Note 8 without a screen protector. Like you, I'm always very careful with my phone and never drop it. The pocket that I put my phone in only contains my phone; I never put loose change or key in there. My Spigen Slim Armor case protects most of the phone and keeps the screen off the table surface if I do put it face down. With all of the issues people have had with curved tempered glass screen protectors, it just seems like more hassle than it's worth. The only one I'd get is the Whitestone Dome but that costs $60 here. Bit pricey.
I always run a protectors. Better safe then sorry.
I take very good care of my stuff. If a scratch did happen you cant take it back. So there would be no way ti fit it without buying a no front glass or new phone.
With a protector you can simply remove it and put on another one.
Fwiw, 5 days and i have a scratch, no clue where it came from. Have never used screen protectors, but will now
Sent from my SM-N950U using XDA-Developers Legacy app
It's def worth it. On my S8 there was a scratch after few days and I am very careful about my phone so really don't know how it happened.
Same here...it is so minor and you cannot even feel it. Babied it too. Also a small one on the back and it had a case day 1. Something tells me it came like that
Going naked for now. Just watch out for sand, fine sand , seems to be the only thing. If it was a flat screen I would have tempered glass on it.
Sent from my Galaxy Note8 using XDA Labs
ANY sharp instrument will scratch if the point is pressed in to the display, period. It is MUCH easier to bang on it with a long blade edge and look like you did nothing than the tip of an x-acto knife. That is what those demos do. Resisting attack across a large area is really what you are seeing. Keys are small like that etc...
Finally, a big part of Gorilla Glass is that it also HIDES or better put doesnt show minor damage as much as other glass. In other words, its there you just don't see it.
I bet a screen for this will be $300-$400. How much is a protector that looks good?
Better safe than sorry. Once it's scratched it would bug the hell out of me. It's a £1000 device.
Throw a screen protector on it. In time, micro-scratches will appear on your screen if you dont!
Note FE, had it on the ironing board (and forgot about it). Folded the ironing board and it very gently slid down it onto the floor face down....very gently....resulted in a 7mm scratch.
Not got one on this yet but it does highlight how pathetically weak GG5 is.
I put one on from iq shield...works great with my ringke wave
Since its a huge pain to find a glass protector that fits and doesn't screw up touch sensitivity I just grabbed the $8 Skinomi wet install protector, works great including with the edge display and S-Pen.
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
princeasi said:
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
Click to expand...
Click to collapse
But if it still looks like a scratch....
I personally really don't get the mentality of people who put huges cases and screen protectors on their phones. Most people here are obsessive on having 'the latest' and upgrade yearly when new stuff comes out so they can have the nicest, thinnest, prettiest shiny piece of hardware - Then they go wrap it all up in a thick rubber/plastic case and make it look sh*t. Why buy a device with no bezel if you're gonna put a huge thick case bezel around it!
I've had all my smartphones without cases/screen protectors as that's how they're meant to be and to honest I look after my devices. I usually get 2 year contracts on phones and at the end of 2 years, worst case, a few micro scratches on the screen - That's it. Do these guys bubble wrap their cars? It's a phone, it's designed to be used, it'll get the odd small scratch, just enjoy it for what it is IMO.
I have dropped my Pixel XL and the screen protector cracked but the screen was fine. Same on my Nexus 6. Dropped it on it's face from about 5' and the screen protector cracked all over it but the screen remained crack free. I fell that a glass screen protector takes the abuse of a drop. Granted, I've never dropped a phone with a screen protector so not sure if they would have cracked the screen without a protector but to me, It used to be relatively cheap protection. Some of the better protectors are 40+ now so it's not as easy a decision as it used to be for me.
So got my shiny new Note 8 week ago. Also with that got the Whitestone Dome screen protector and alcantara case.
Tried to install screen protector:
1st. attempt: The screen lined up incorrectly from the bottom, tried to "lift it up to the position" just created more airbubles and the glue poured out from the sides.
After cleaning my Note 8 with the alcohol swipes, (It was a mess to try to clean the phone AND the glass screen protector)
2. attempt with the second bottle of glue..... There was a dust particle on the glue itself. Great.
Wait for a week to mobilefun to ship me another one. (while doing so i was "dry- practicing" to get it 100% correct this time)
3. attempt was a charm.... until.... when the glue spread there was 2 small air bubbles... Take the second bottle and "tap" the small air bubbles away. (while doing so being extremely nervous about that the screen protector might move or great new bubbles). Managed to get the bigger one out but there was the small one... Didn't get that out.
Light up the UV light and call it a day. Only problem is now there is small air bubble that is pretttty distracting to say the least.
So, now i am with 50€ in my account from the order. (Because i demanded that they refund me this horrible product). I am left to choose new screen protector.
My options that i have read:
- Rearth invisible defender - The problem with this is that there is "snowfall" effect and the screen is too damn sticky (according to reviews)
- IQ Shield - The problem with this is that the S-pen (according to reviews) leaves trails to the TPU protector. Because it's so soft and it will not cure overtime.
-Zagg invisible shield - Unresponsivnes and the fact that it has "raimbow" -effect on the screen.
New one that i just founded out about:
-Powerpeak Base- According to this guy (Install Jimmy is Promo's "Base Screen protector for Samsung GALAXY S8 & Note 8 here) Its pretty good. Might be ad though... Does any of you have experience on this?
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Bullitt3309 said:
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Click to expand...
Click to collapse
I am sort of guy, who can easily mess things like that up... So not going to risk it.
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
DAvid_B said:
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I did check that thanks! Only problem is that i live in EU (Finland) And Amazon will not ship that item to me.... Looked up in Ebay and they will add 20€+ to the original price...
Bummer tho,.
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Base TGSP is a piece of shot
That Jimmy guy sounds like an infomercial
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
xile6 said:
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
Click to expand...
Click to collapse
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Limeybastard said:
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Click to expand...
Click to collapse
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
KBeckett said:
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
Click to expand...
Click to collapse
Im primarily using and trying non glass type films, similar to the stuff used to protect car paint protection. My background includes being able to apply paint protection film on cars so these are all from the same mold that I have been trying. BTW, heat of a hairdryer will aid in adhering the curved edges once applied- slight tip.
I have not tried IQShield yet, sorry. So far the Spigen one fitted well coverage wise,but their film is very aggressive in the orange peel front,
I might try Skinomi next, but I have heard they cut their films short to save a few bucks.
Lets liase and share our experiences with these type of films, cheers.
Thanks for all of you for the help and responses.
Yes the IQshield and Skinomi are on the top of my list... They are around 20€ including shipping to Finland from Ebay. A bit expensive but lets see....
Im currently using IQshield version 2 (case friendly) for about a week now.
I've done a lot of wet install before so i know what to expect using this type of screen protector. Its been a week now and so far no lifting on the curve part of the screen. it is smooth to touch, sensitivity is normal and very good. Im using a VRSdesign slim case and it works well, all corners fitted very well.
I also used skinomi before and if i remember it right IQshield is more smoother than skinomi in-terms of orange peel feeling. The only problem that is s-pen will leave marks when used with this kind of screen protector. (i tried it at the very bottom and its still have mark after a week)
I can give this IQshield a 7.5/10 score. LOL
YesThisIs said:
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
Click to expand...
Click to collapse
I used the tip of placing painter's tape over the speaker. I covered the speaker enough to not interfere with the glass. It worked great! I do have three small bubbles after two tries but can't see them unless I try. My wife's has one bubble in about the same spot as mine. The lower left corner about 1/3 up the screen where the curve starts. There a number of ways to avoid the creation of bubbles. I couldn't say them all because I'm not an expert in LOCA glue and it's properties. Experimentation is the only way to find out.
Whitestone Dome Glass said:
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Click to expand...
Click to collapse
I am glad that you have started beeing more on forums and social media. I want to thank you for sending me a new one. Now i am waiting for it. Hope this time works.
To be honest, it will be difficult to actually get most tempered glass protectors to stay on this curved glass.. Its a pain and it sucks because I would actually like to get one. I just ordered the whitestore myself..., but they wont be in stock again until the 30th...
I got the PowerPeak Base and it is utter garbage. I lost atleast 30% touch sensitivity and then it just eventually slid off of my phone from me trying to swipe so hard. The middle actually dried up and there was nothing holding the middle to the phone.
I despise the wet installs. They are too soft and will leave indents as you said.. So really its either try tempered glass protectors until you find the one you want, go with indents and wet installs, or just go no screen protector like me!
I have the wet install spigen ones but I tbh would rather go with no protector than use them.
I ordered and installed this on my Note 8 : https://smile.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
Along with a Spigen Tough Armor case. It seems to work well and no real screen sensitivity issues either.
twistanesh said:
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
Click to expand...
Click to collapse
I get the case friendly 2pack. And havent had problems with lifting.
Had my note 8 since sept 8 and been caseless and no lifting.
Anyone planning on using a cheap protector with LOCA glue needs to check the strength of the LOCA. Some have reported they were not able to remove the protector after using some LOCA glue.
I had 3 attempts at the Dome Glass myself. The first one I got had a broken bridge. I could not get the glue in the right spot. Whitestone refunded me. I bought the next set from Amazon. Everything was perfect until I peeled the plastic off the back of the protector. There must have been a fleck of dirt near the side. I did not see it as I did not have enough light.
I sent the second one back to Amazon and just had to pay return shipping. With the third one I took a different approach. I used a totally level counter top in the bathroom. I ran the shower with hot water for about 10 minutes so the whole bathroom was steamed up. This kept the dust down. I cleaned the phone screen and when I removed the plastic from the protector, it somehow grabbed another piece of dirt. Due to the extreme lighting, I saw it and removed it before installing. It installed perfectly with no dust/dirt or air bubbles. I did the first cure with the UV light then took it out of the jig and wiped the sides, top and bottom with an alcohol pad. I then did the final cure. Not one ounce of glue seeped out. I did not protect the speaker or anything else. If this is done perfectly, this is the absolute best protector available IMHO. The problem is anything short of a perfect install will drive many of us with OCD crazy.
On Monday we traded in my Mothers iPhone and she went with a Note 8. The Dome Glass arrived today. This time, perfect install the first time. I wish Whitestone would include 2 pieces of glass per package since this is the most expensive Note 8 protector. Their CS is a bit slow but they did take care of me in the end. It's a bit of a ripoff to sell the kit for 49 but then only sell the glass and one tube of glue for 39. The refill pack should be 15-20 at the highest.
After a week, none of my edges are lifting at all. Some may be using cases that are not compatible. My protector does not touch my case at anyplace. I think cases that touch the protector have a good chance of raising the edges. Even if the case looks fine after install, if grabbing it makes the case touch the glass, it will eventually lift and get bubbles.
I've tried plastic, wet install, and glass..... Glass was the best in terms of clarity but much more of a finger print magnet than the original glass underneath. And more reflective... The wet install one showed the spent marks.. At this rate I'll spend more on screen protectors than a replacement screen.... Please send your recommendations. Thanks
Lol. There are like 10 screen protector threads here already !
Sent from my Galaxy Note8 using XDA Labs
Dejan Sathanas said:
Lol. There are like 10 screen protector threads here already !
Click to expand...
Click to collapse
But a lot of people are just looking for protection.... I am looking for more...
magichoward said:
I've tried plastic, wet install, and glass..... Glass was the best in terms of clarity but much more of a finger print magnet than the original glass underneath. And more reflective... The wet install one showed the spent marks.. At this rate I'll spend more on screen protectors than a replacement screen.... Please send your recommendations. Thanks
Click to expand...
Click to collapse
Feel your pain. I've done all what you have except for trying the glass ones.
Here is my experience. Get wet applied plastic one that is harder than the usual wet applied ones. A person on another thread recommend a Walmart Onn brand , I used it and it didn't leave S Pen marks at all. However, it was a ***** to fit correctly, so I being OCD I removed it and went back to the usual wet applied one again that does leave S Pen marks.
I believe Tech21 makes a screen protector similar in characteristics as the Walmart ONN one . Ain't tried that yet. But I can tell you that if the the Walmart ONN screen protector was applied correctly then I'd still be a fan.
Sent from my SM-N950U using Tapatalk
magichoward said:
But a lot of people are just looking for protection.... I am looking for more...
Click to expand...
Click to collapse
So your criteria would be: best protection available without fingerprints, reflections, or s-pen marks? Might be tough without compromising a bit on one of those aspects. I've tried 2 cheap glass ones that I took off immediately, the Spigen film protectors that leave s-pen marks, and the Whitestone Dome which which was best for me of the bunch (no s-pen marks of course, and no fingerprint issues so far. Haven't paid attention to reflection issues as of yet). The new Zagg glass looks promising too...ymmv
I like Skinomi. You get some s pen marks but they go away overnight. I use the spen alot too, it's my preferred way to interact with the screen.
Go naked and live with it. I have been there, where you say to be and feel your pain. I just gave up and live with it. In case I really manage to break or badly scratch it, I will have to get a new one or live with it. All is better than the smudgy protectors giving a bad feeling to the touch and a bad view.
corwin_amber said:
Go naked and live with it. I have been there, where you say to be and feel your pain. I just gave up and live with it. In case I really manage to break or badly scratch it, I will have to get a new one or live with it. All is better than the smudgy protectors giving a bad feeling to the touch and a bad view.
Click to expand...
Click to collapse
I'm so close to doing that but I live by the beach worried about scratches more than dropping it..
magichoward said:
I'm so close to doing that but I live by the beach worried about scratches more than dropping it..
Click to expand...
Click to collapse
Beach and sand indeed is an issue. I do not live on the beach but was there last summer (S8+, no pen, easier situation) and was so glad to have a film protector on it.
Bite the bullet and get a Whitestone dome?
If I may offer an alternative suggestion? I did not even want to risk the screen protector lottery on this phone, so I took a different approach.
I have used a case with a built-in screen protector. I feel it gives me the best of both worlds; ultimate protection from drops and screen damage when out and about, and in a couple of seconds (when at home and the soft safety of my sofa), it can be out of its case and back to a slippery naked unblemished masterpiece.
https://www.amazon.co.uk/i-Blason-Galaxy-Note-Protection-Reduction/dp/B074W3WBVC/ref=sr_1_1?ie=UTF8&qid=1516792422&sr=8-1&keywords=i-blason+note+8
Cons:
Minor reduction in finger sensitivity at the edges.
Adds significant bulk, especially in width making one-handed use impractical
Screen protector picks up scratches after a few months
Wearing polarised sunglasses makes screen hard to see (rainbow effect)
Be certain inside of screen cover is clear of grit before fitting
Pros:
Zero reduction in S Pen sensitivity.
Phone is tank-like. Has survived drops onto solid concrete no problem.
Screen protector can be popped out and used just as case if desired.
Dust caps for charging and headphone sockets
Easy to take off and have naked phone
It all balances out IMO. It might not be a perfect solution, but it is mine and I am happy with it.
I would advise against it, especially in a sandy environment. It WILL find a way in and then have a party with your screen. Also, in my personal opinion, this is way too bulky.
Personally, I am using a pitaka case. I am also having a thin, blank film on the back because ofscrarch protecting the back.
i'm using the official one for S8+ and it's very good, the s-pen does not leave any mark
I have used all types and found my favorite to be the tech21. No sensitivity issues, screen is clear, no spen marks, and decent with dealing with fingerprints. I couldn't use another after using this one.
Wouldn't it be just nice if Samsung offered a factory glass screen protector as an option when buying these devices. I'm sure they are aware of customers concerns - surely they have the technology to be able to do this, albeit probably not financially viable hence no go.
Sent from my SM-N950U using Tapatalk