[ROM] [Stock] Galaxy Grand Prime lollipop (Port) - Galaxy Grand Prime Android Development

Hi,
I tried to port Galaxy Core Prime LTE (SM-G360F) firmware to Galaxy Grand Prime LTE (SM-G530F).
Since I don't have the device on hand, I need testers.
!!! WARNING !!!
- ROM has not been tested
- It obviously can brick your device
- It simply may not install or boot
- I'm not responsible for any problem caused to your device after flashing the rom, your device = your responsability
If you're OK with these and want to test, please download the ROM here http://www.mediafire.com/download/xk5oudn15xw0mhd/GPrime_LP_Test_Version.zip
Don't blame me if the ROM didn't boot, you've been warned
XDA:DevDB Information
GPrime LP, ROM for the Samsung Galaxy Grand Prime
Contributors
Nonta72
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Testing
Created 2015-07-24
Last Updated 2015-07-24

I will test it but my phone is G530H Dual

testing (Y)

kn06497 said:
testing (Y)
Click to expand...
Click to collapse
Nonta72 said:
Hi,
I tried to port Galaxy Core Prime LTE (SM-G360F) firmware to Galaxy Grand Prime LTE (SM-G530F).
Since I don't have the device on hand, I need testers.
!!! WARNING !!!
- ROM has not been tested
- It obviously can brick your device
- It simply may not install or boot
- I'm not responsible for any problem caused to your device after flashing the rom, your device = your responsability
If you're OK with these and want to test, please download the ROM here http://www.mediafire.com/download/xk5oudn15xw0mhd/GPrime_LP_Test_Version.zip
Don't blame me if the ROM didn't boot, you've been warned
XDA:DevDB Information
GPrime LP, ROM for the Samsung Galaxy Grand Prime
Contributors
Nonta72
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Testing
Created 2015-07-24
Last Updated 2015-07-24
Click to expand...
Click to collapse
Error install
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kn06497 said:
Error install
Click to expand...
Click to collapse
Looks like a Binary error.
Did you try with CWM ?
Also, did you ever flashed something via this TWRP ? If yes, where is the link to that rom/mod/kernel ?
Thanks for testing.

Nonta72 said:
Looks like a Binary error.
Did you try with CWM ?
Also, did you ever flashed something via this TWRP ? If yes, where is the link to that rom/mod/kernel ?
Thanks for testing.
Click to expand...
Click to collapse
I will try to CWM
---------- Post added at 04:55 PM ---------- Previous post was at 04:38 PM ----------
Nonta72 said:
Looks like a Binary error.
Did you try with CWM ?
Also, did you ever flashed something via this TWRP ? If yes, where is the link to that rom/mod/kernel ?
Thanks for testing.
Click to expand...
Click to collapse
same error

kn06497 said:
I will try to CWM
---------- Post added at 04:55 PM ---------- Previous post was at 04:38 PM ----------
same error
Click to expand...
Click to collapse
Upload your build.prop file

Nonta72 said:
Upload your build.prop file
Click to expand...
Click to collapse
I'm sorry I can not even upload
https://www.dropbox.com/s/6tc4k9jsa7kbq1w/build.prop?dl=0

kn06497 said:
I'm sorry I can not even upload
https://www.dropbox.com/s/6tc4k9jsa7kbq1w/build.prop?dl=0
Click to expand...
Click to collapse
Unzip the ROM
Delete the build.prop file in the ROM
Download the build.zip file in attachments
Unzip it
Put the build.prop from the archive in the ROM
Zip it and try to install again.

Nonta72 said:
Unzip the ROM
Delete the build.prop file in the ROM
Download the build.zip file in attachments
Unzip it
Put the build.prop from the archive in the ROM
Zip it and try to install again.
Click to expand...
Click to collapse
fail

Still same error

Testing in SM-G530BT

kn06497 said:
fail
Click to expand...
Click to collapse
BrutalPoland said:
Still same error
Click to expand...
Click to collapse
I suspect the error to come from META-INF folder.
- Download and extract the file in attachments
- Extract the ROM again
- Copy the META-INF folder in safe place, delete the same folder from the ROM
- Put the extracted one in the ROM
- Zip and try

Nonta72 said:
I suspect the error to come from META-INF folder.
- Download and extract the file in attachments
- Extract the ROM again
- Copy the META-INF folder in safe place, delete the same folder from the ROM
- Put the extracted one in the ROM
- Zip and try
Click to expand...
Click to collapse
I did everything you said
META-INF folder replace
and build.prop

kn06497 said:
I did everything you said
META-INF folder replace
and build.prop
Click to expand...
Click to collapse
That's really unusual!
It should at least install.
But let's keep retrying.
Download the file below,
Replace META-ING folder again, and also build.prop
Try and report back.
By the way, can you confirm your device is SM-G530H not SM-G530F ?

Nonta72 said:
That's really unusual!
It should at least install.
But let's keep retrying.
Download the file below,
Replace META-ING folder again, and also build.prop
Try and report back.
By the way, can you confirm your device is SM-G530H not SM-G530F ?
Click to expand...
Click to collapse
I have SM-G530FZ

BrutalPoland said:
I have SM-G530FZ
Click to expand...
Click to collapse
Does it have 4G/LTE ?

Nonta72 said:
Does it have 4G/LTE ?
Click to expand...
Click to collapse
Yes

Nonta72 said:
That's really unusual!
It should at least install.
But let's keep retrying.
Download the file below,
Replace META-ING folder again, and also build.prop
Try and report back.
By the way, can you confirm your device is SM-G530H not SM-G530F ?
Click to expand...
Click to collapse
sm-g530H will try again :fingers-crossed:

BrutalPoland said:
Yes
Click to expand...
Click to collapse
Is the processor msm8916 ? or msm8216 ! (Just found on internet that SM-G530FZ have msm8216). But I think the msm8216 = msm8916
kn06497 said:
sm-g530H will try again :fingers-crossed:
Click to expand...
Click to collapse
OK

Related

[HOW-TO]Port a Note 4's ROM to G906S/K/L and G901F

​​
Consist of 6 parts:
1.Replace Kernel
2.Fix RIL and Audio
3.Fix Sensors
4.Fix Wi-Fi
5.Fix Camera
6.Fix Telephony
To begin with,
Download a Note 4's ROM(APQ8084-based and single SIM version) such as N9108,N910F
Example:[5.1.1]Aurora.N9108.Full.Note5.Port.No.6
Link:http://pan.baidu.com/s/1dEb8FEp
Don't forget permissions
folders:0755
files:0644
bin:0755
If you have any question,just reply
I wish all ROM ported to G906&G901 using this guide can be released in order to enlarge the number of ROM of G901&G906
If this thread can help you,please click Thank.
Part 1 : Replace Kernel
1.Get Kernel from that Note4's ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Unpack Boot.img using Android Image Kitchen (http://forum.xda-developers.com/showthread.php?t=2073775)
3.Replace zImage and dtb in split_img with a 5.1.1 compatible one of G901F or G906S/K/L
4.Repack Boot.img
Run repackimg.bat
There will be an image-new.img
5.Replace boot.img in that ROM with image-new.img
Kernel source: https://github.com/jesec/android_kernel_samsung_apq8084
G906: View attachment G906-5.1.1.zip
Part 2 : Fix RIL and Audio
1.Replace system/libril.so and system/libsec-ril.so with G906S/K/L or G901's
2.Replace system/etc/*.acdb with G906S/K/L or G901's
Part 3 : Fix Sensors
1.Replace system\lib\hw\sensors.apq8084.so with G906S/K/L or G901F's
Part 4 : Fix Wi-Fi
1.Replace system/lib/libhardware_legacy.so with G906S/K/L or G901F's
2.Flash ROM to your phone please,it will let file adding and modifing easier.
With a compatible kernel,it would boot now.
Custom recovery link:
G901F:http://forum.xda-developers.com/gal...recovery-twrp-2-8-7-0-touch-recovery-t3270228
G906S/K/L:http://forum.xda-developers.com/gal...overy-teamwin-recovery-project-2-8-7-t3259606
3.Wait it boot
4.Remove this folder using Root Explorer on your phone.
system/etc/wifi
6.Add files from zip
View attachment wlan.zip
Part 5 : Fix Camera
1.Remove these files:
system\vendor\lib\H16*
system\lib\H16*
system\etc\H16*
2.Replace these files with G901F or G906's
system\bin\mm-qcamera-daemon
system\vendor\lib\libchromatix*
system\vendor\lib\libmmcamera*
3.Add these files from stock G901F or G906 ROM
system\etc\F16*
system\lib\F16*
system\vendor\lib\F16*
Part 6 : Fix Telephony
1.Copy system\framework\telephony-common.jar to your computer.
2.Decompile that jar using APK studio
3.Remove these files
com/android/internal/telephony/RIL*.smali
4.Decompile stock telephony-common.jar
5.Copy stock com/android/internal/telephony/RIL*.smali to that one from Note 4's ROM
6.Recompile that jar and sign.
7.Copy it to your Phone.
This aint for G900F?
dr460nf1r3 said:
This aint for G900F?
Click to expand...
Click to collapse
NO
jesse-chan said:
NO
Click to expand...
Click to collapse
But will this work if I take a Note 3 Rom to Port since Hardware is Mostly similar?
dr460nf1r3 said:
But will this work if I take a Note 3 Rom to Port since Hardware is Mostly similar?
Click to expand...
Click to collapse
Maybe.
jesse-chan said:
Maybe.
Click to expand...
Click to collapse
Ill go ahead and try once your guide is completed.. Was searching for such a guide for a long time
Hi dude, thanks for the nice guide.
I've got some questions about these commits you've made,
f59ed5d94676c43de84b9b919f54c4faa21094ff security: Import N9100-COK2
0d5759624adb2f0a57e6bb7cc9cfb97998ac1a1f include:Import N9100-COK2
and so on..
At first I thought you just overrided the N9100 kernel source on top of yours, but I made a diff with the original N9100 kernel source and found out that you actually didn't.
(I couldn't find COK2 source for N9100 so instead downloaded COK1 source)
I wonder how you merged the N9100 source files, maybe you created a patch by using 'diff -urN' between stock BOI5 and N9100 COK2 source and applied it with 'patch -p1'?
Will be looking forward to your answer, and again thanks for your contributions for our device.
Thanks in advance.
dr460nf1r3 said:
Ill go ahead and try once your guide is completed.. Was searching for such a guide for a long time
Click to expand...
Click to collapse
Tons of kernel-side changes are required, which have already been made by Jesse in case of G906.
Maybe you should contact a skilled kernel developer first.
jesse-chan said:
Maybe.
Click to expand...
Click to collapse
Hi, I know this is too much to ask, but can you provide tutorial to port aosp ROM too? Thanks XD
Sent from my SM-G906S using Tapatalk
jesse-chan said:
1.Copy system\framework\telephony-common.jar to your computer.
2.Decompile that jar using APK studio
3.Remove these files
com/android/internal/telephony/RIL*.smali
4.Decompile stock telephony-common.jar
5.Copy stock com/android/internal/telephony/RIL*.smali to that one from Note 4's ROM
6.Recompile that jar and sign.
7.Copy it to your Phone.
Click to expand...
Click to collapse
hi,
it is possible to perform you the above steps for G901F dwvice and add it here?
am also specify where to copy the file in the ROM?
thanks.
jesse-chan said:
Maybe.
Click to expand...
Click to collapse
Why IT don't work with g900f
Can i port with this Guide a note 3 Rom to s5
The g901 have only better cpu
[email protected] said:
Why IT don't work with g900f
Can i port with this Guide a note 3 Rom to s5
The g901 have only better cpu
Click to expand...
Click to collapse
Yes that it can work.
I'm porting SmokkieRom v5 to S5, I have almost finished, only need edit frameworks, after I will try to boot it
EDIT: If Someone want to help me you're welcome, PM to ROM Facebook Page (you can find it on my signature)
kykint said:
Hi dude, thanks for the nice guide.
I've got some questions about these commits you've made,
f59ed5d94676c43de84b9b919f54c4faa21094ff security: Import N9100-COK2
0d5759624adb2f0a57e6bb7cc9cfb97998ac1a1f include:Import N9100-COK2
and so on..
At first I thought you just overrided the N9100 kernel source on top of yours, but I made a diff with the original N9100 kernel source and found out that you actually didn't.
(I couldn't find COK2 source for N9100 so instead downloaded COK1 source)
I wonder how you merged the N9100 source files, maybe you created a patch by using 'diff -urN' between stock BOI5 and N9100 COK2 source and applied it with 'patch -p1'?
Will be looking forward to your answer, and again thanks for your contributions for our device.
Thanks in advance.
Tons of kernel-side changes are required, which have already been made by Jesse in case of G906.
Maybe you should contact a skilled kernel developer first.
Click to expand...
Click to collapse
Yeah,I merge it.And OK2 is just a mistake,I forget the number at that time.
I compare N910-BOF with N9100-COK and apply it to G906-BOJ.
stefanz08 said:
hi,
it is possible to perform you the above steps for G901F dwvice and add it here?
am also specify where to copy the file in the ROM?
thanks.
Click to expand...
Click to collapse
Just copy to where it is copied from.
Weild Hayn said:
Hi, I know this is too much to ask, but can you provide tutorial to port aosp ROM too? Thanks XD
Sent from my SM-G906S using Tapatalk
Click to expand...
Click to collapse
I lost my phone now,so i can't provide tutorial to port AOSP ROM until I find my phone.
But actually you can build by yourself,here is a fully working device tree that can build Cyanogenmod present to you by CallMESuper and me.
https://github.com/Dev-in-Advance/android_device_samsung_lentislte

[ROM][5.1.x][UNOFFICIAL] Xperia Cool™ [2016][P3100]

Fri harseno v
Click to expand...
Click to collapse
What is Rom ?
Xperia Cool the ROM has been based on CM, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thank's : CM and of course to all the supporters,Loksado team Amandit , , xperia legend
Bugs:
- Themes app
- keyboard fc
Features :
- Album
- Movie
- Walkman
- Walkman Visualizer
- Clear Audio+
- Equalizer Preset + Manual mode
- Visualizer
- Surround Sound VPT
- Clear Bass and Clear Stereo
- S-force Front Surround
- DSEE HX (Not work currently due problematic with audio primary)
- Dynamic normalizer
- Edit Music info
- Download Music Info
- SensMe
- Throw
- DLNA
- Audio setting on Movie app
- Facebook
- Twitter
4.. Xperia Home
5. Xperia Keyboard
6. Calender
7. Movie Editor
8. Photo Editor
9. Movie Creator
10. Audio Recorder
11. Ps app
SCREENSHOTs :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
ROM
Gapss:
GApps
Instructions:
First time flashing Rom your device, or coming from another ROM
WARNING : This procedure will factory reset your device! Accounts, applications, settings, etc will be lost!
Download the file Rom.zip to your phone from the links below
Download the file gapps-511-base-xx-signed.zip to your phone from the links above
Reboot your device into Recovery mode by holding PWR+VOL-UP
Format userdata, cache and dalvik cache
Install both the ROM and the GApps zip files
Reboot
Upgrading from earlier version
Download the file Rom.zip to your phone from the links above
Reboot your device into Recovery mode by holding PWR+VOL-UP
Install the ROM zip
Reboot
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.31.x
ROM VERSION: V1.0
XDA:DevDB Information
[ROM][5.1.1][UNOFFICIAL] Xperia Cool [2016], ROM for the Samsung Galaxy Tab 2
Contributors
@anonymou21
ROM Kernel: Linux 3.31.x
Based On: CyanogenMod CM12.1
ROM Created By: Fri harseno Valensia
Version Information
Status: Testing
Created: 2016-01-31
Last Updated: 2016-02-10
Last update feature new and add tweaks
Click to expand...
Click to collapse
fix error binary
Click to expand...
Click to collapse
download rom you afterwards exstrak and his meta.inf replaced finished substituted for the zip again and start is flashing
[email protected]
Wow, 500 mb
Is it for all variants?
Sent from my GT-P3100 using Tapatalk
Looks like screenshots aren't taken on tab 2. Post some more screenshots. What about SystemUI and framework? Are they themed? Sony Battery Icons, Sony Lockscreen? Mention everything clearly please.
abhatia1435 said:
Looks like screenshots aren't taken on tab 2. Post some more screenshots. What about SystemUI and framework? Are they themed? Sony Battery Icons, Sony Lockscreen? Mention everything clearly please.
Click to expand...
Click to collapse
I ported system ui sony to ayatem ui gtab
anonymou21 said:
I ported system ui sony to ayatem ui gtab
Click to expand...
Click to collapse
Well, there was no need to port. It's already ported and present in Sony Cross Device Development thread(for all CM LP ROMs). Anyway, will give it a go. Thanks.
abhatia1435 said:
Well, there was no need to port. It's already ported and present in Sony Cross Device Development thread(for all CM LP ROMs). Anyway, will give it a go. Thanks.
Click to expand...
Click to collapse
but there are many app fc
help me, i cant install, it wrote that error 6 , i dont know why plz help p3100
wheres the screenshot??
I have installed rom some screenshots
mahive said:
I have installed rom some screenshots
Click to expand...
Click to collapse
Looks good, does it have the same random reboot bug as other 5.x.x ROMs for this device tho..?
Is it only for p3100
Sent from my GT-P3100 using Tapatalk
I Have installed on my p3100. one reboot in 10 hrs.
mahive said:
I Have installed on my p3100. one reboot in 10 hrs.
Click to expand...
Click to collapse
help me, i cant install , it was error 6_ i saw it checking md5 then the error was shown, i also saw that the sd card in the error sentence.
Downloading link is disabled due to heavy traffic??yes
Sent from my GT-P3100 using Tapatalk
John Aisling said:
help me, i cant install , it was error 6_ i saw it checking md5 then the error was shown, i also saw that the sd card in the error sentence.
Click to expand...
Click to collapse
There is problem with updater-script. I don't know how to solve it. I replaced META-INF folder from this rom with META-INF folder from tipsy rom using win-rar and flashed successfully. Thanks :good::good:
mahive said:
There is problem with updater-script. I don't know how to solve it. I replaced META-INF folder from this rom with META-INF folder from tipsy rom using win-rar and flashed successfully. Thanks :good::good:
Click to expand...
Click to collapse
how can i do that? the file?
---------- Post added at 03:10 PM ---------- Previous post was at 03:03 PM ----------
maybe i wait for the stable version or more performace or bug fixed
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
im flashing this http://forum.xda-developers.com/showthread.php?p=58071362#post58071362 its amazing
extract attached file with winrar on pc. Open rom with winrar and delete META-INF folder from rom. Just drag META-INF folder you have extracted in rom. copy this new rom in sd card and flash it. no error
mahive said:
extract attached file with winrar on pc. Open rom with winrar and delete META-INF folder from rom. Just drag META-INF folder you have extracted in rom. copy this new rom in sd card and flash it. no error
Click to expand...
Click to collapse
wow , its working now, how can u do this, im very happy, are u IT or a rom maker? but when it was done, i saw it showing : succed:result :/system . I dont understand. what is that?
---------- Post added at 05:01 PM ---------- Previous post was at 04:59 PM ----------
mahive said:
extract attached file with winrar on pc. Open rom with winrar and delete META-INF folder from rom. Just drag META-INF folder you have extracted in rom. copy this new rom in sd card and flash it. no error
Click to expand...
Click to collapse
do u know how to backup imei? i have use one tool in xda but it didnt support the p3100 so...
plz provide full download links p3100 and his recovery, gapps
some sony apps stop when i click it. plz fix it and can u help the vietnamese people, almost the rom dont have the telex keyboard of vietnam so i hope this rom wil have that, im very like ur rom... and the camera, could u performace it for more beatiful

[4.4.2][AOSP][Unoffical][A3000-H]Kitkat for Lenovo A3000...

USE THE NEWER Version Here :
http://forum.xda-developers.com/lenovo-a3000/orig-development/rom-lenovo-a3000-h-aosp-4-4-2-t3414278
This is Pure Android 4.4.2 with a little changes to make it more beautiful....
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version). Before flashing, please make sure to be on Stock 4.2.1 a3000_prc_3gfull and use CWM or TWRP recovery. (All you need...below)
Code:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
-Real ANDROID 4.4.2 and kernel version 3.4.67
-All apps is Pure..
-some changes like Wallpaper and icons to have more beauty.
-All google apps is included
-Camera is full working (google camera)
-No storage bugs
-Pre-Rooted
-ART works fine
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUGs:
No Bugs...but there is some issue in rotation (you can fix by Xposed)
You may till me if you found something else.
Download & Install
look below...
CREDITs
•XDA Developers
•4pda Developers
•kupyxa4444
XDAevDB Information
4.4.2 AOSP for the Lenovo A3000-H, ROM for the Lenovo A3000
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status:Stable
Download :
Rom : http://www.mediafire.com/download/zcdre3rualsyh6x/AOSP442.zip
TWRP: http://www.mediafire.com/download/ufxg3rkveth3cui/TWRP_recovery.zip
Stock Frimware : https://www.mediafire.com/download/0cayc8cycad0z53
Tweak to Resize Storage : http://www.mediafire.com/download/yectd3deic7gdqh/EBRtweak.zip
install
-be sure that you on AOSP 4.2.1 a3000_prc_3gfull
-Download TWRP and Flash it Using SP_Flash_Tool
-Download Rom Zip and flash it by Recovery
Note: if you want to change internal storage you can use Tweak I have attached above.
*Run EBRtweak.exe
*Select size you want
*flash New ERB1 & ERB2 by SP_Flash_Tool
thank you.......
is SD card=Internal Storage because it make my device slowly??
is ART work really??
Happy-Droid said:
thank you.......
is SD card=Internal Storage because it make my device slowly??
is ART work really??
Click to expand...
Click to collapse
No SD card=SD card and internal=internal
and ART working fine, if you have problem with it tell me
nice work...thanks
Great Rom...everything work perfect.
Hesham Sleem, gladto see one more stable Rom for MTK6589. I know, this is a A3000 thread. I would like to ask, how difficult would it be to bring it on Lenovo S6000-H? Both devices are similar to each other. As I know, the screen size is different.
Thank you for reply.
Hans_Werner
it shows an error not all images are found
first time install rom
hi , i have problem here i install a rom on my a3000 now the sim is not working , and i can't fix it > plz is there video to help me install this rom on my tab and make it work right ???
Hans_Werner said:
Hesham Sleem, gladto see one more stable Rom for MTK6589. I know, this is a A3000 thread. I would like to ask, how difficult would it be to bring it on Lenovo S6000-H? Both devices are similar to each other. As I know, the screen size is different.
Thank you for reply.
Hans_Werner
Click to expand...
Click to collapse
it may be easy because the two devices have same chipset...you may have problem with screen size.
karim600 said:
hi , i have problem here i install a rom on my a3000 now the sim is not working , and i can't fix it > plz is there video to help me install this rom on my tab and make it work right ???
Click to expand...
Click to collapse
try to reflash your modem...if you still have the problem tell me
How difficult would it be for someone with no porting skills? I don't know how to start. I am looking forward to get a newer android version.
Gesendet von meinem D6503 mit Tapatalk
I get an Error when installing it from the recovery mode by TWRP
*Skipping MD5 check: no MD5 fil found.
*Warning: No file_contexts
*symlink: some symlinks failed
*E :Error executing updater binary in zip ' /sdcard/Android OS/AOSP442.zip'
*Updating partition details...
Then it stops and I can choose to (Wip Cache/Dalvik) or (Home) or (Reboot System)
So what to do please help me
yousif amr said:
I get an Error when installing it from the recovery mode by TWRP
*Skipping MD5 check: no MD5 fil found.
*Warning: No file_contexts
*symlink: some symlinks failed
*E :Error executing updater binary in zip ' /sdcard/Android OS/AOSP442.zip'
*Updating partition details...
Then it stops and I can choose to (Wip Cache/Dalvik) or (Home) or (Reboot System)
So what to do please help me
Click to expand...
Click to collapse
OK.. First please be sure you have flashed the TWRP Recovery i have attached in post #2 and put the Rom zip file in the root of SD card not in any folder.. and try again
[/COLOR]
Hesham Sleem said:
OK.. First please be sure you have flashed the TWRP Recovery i have attached in post #2 and put the Rom zip file in the root of SD card not in any folder.. and try again
Click to expand...
Click to collapse
I had flashed the TWRP by an app named Flashify on the playstore.
And I copied the ZIP file to the Sdcard not in a folder and still have the errors
---------- Post added at 02:06 PM ---------- Previous post was at 01:24 PM ----------
yousif amr said:
[/COLOR]
I had flashed the TWRP by an app named Flashify on the playstore.
And I copied the ZIP file to the Sdcard not in a folder and still have the errors
Click to expand...
Click to collapse
Now it can't boot and when I connect it to the charger I only see the Lenovo Logo and it stucks on it...
please help me ASAP...
Hesham Sleem said:
No Bugs...but there is some issue in rotation (you can fix by Xposed)
Click to expand...
Click to collapse
Could you write something more about this? What is exactly the problem? Which Xposed module/s should I install to fix it?
Thanks in advance
yousif amr said:
[/COLOR]
I had flashed the TWRP by an app named Flashify on the playstore.
And I copied the ZIP file to the Sdcard not in a folder and still have the errors
---------- Post added at 02:06 PM ---------- Previous post was at 01:24 PM ----------
Now it can't boot and when I connect it to the charger I only see the Lenovo Logo and it stucks on it...
please help me ASAP...
Click to expand...
Click to collapse
My tablet got Bricked and I can't unbrick it...
Can anyone help me???
I am busy right now… please give me two days and i will help you..
yousif amr said:
My tablet got Bricked and I can't unbrick it...
Can anyone help me???
Click to expand...
Click to collapse
Now...i attached the Stock frimware you must flashed on you Tablet
try to flash the frimware and try again.
AOSP 4.4.2
Hesham Sleem,
This is works very well, thank you!!! I have been looking for an "update" for the A3000 and this solves my issue.
Few things I noted from tha past 2 days since I upgraded to this ROM:
1) Rotation issue (Already stated by you) . This happens specifically during calls where the display switches to portait mode.Yet to try Xposed to fix this issue though. Which module would you recommend to fix this issue?
2) Garbled screen during bootup, before the 4 coloured circles appear. Not sure what the issue is or why it happens, but it happens everytime I start up the tablet.
3) Battery life seems to have dropped. Hopefully it will get better over the next few charge cycles.:fingers-crossed:
Apart from these, I find the tablet way better and responsive compared to the stock ROM.
Thank you for all your efforts!! :good:

[rom][unofficial][6.0.1] aokp [z00ed/z00rd]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1: Verify that you're using the latest version of TWRP
2: Perform a FULL WIPE as described below if coming from another ROM or a different version of Android (A full wipe is when you wipe system/data/cache)
3: Flash the latest version of this ROM
4: Flash GAPPS
5: Reboot and ENJOY!!
Z00ED/Z00RD: https://www.androidfilehost.com/?fid=385035244224382917
Check out the ROM source on github. Open source, in the spirit of community kangage.
CREDITS:
Thanks to Cyanogen-mod
Contributors
STELIX
Source Code: http://github.com/AOKP
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, TWRP
Based On: CyanogenMOD
Version Information
Status: Unknown
Created Oct 06, 2016
Last Updated Oct 06, 2016
WARNING:
I'm not the creator of this ROM as I just found it while searching AFH website. Also STELIX (the guy who made this ROM ) is shown in AOKP as one of "THE KANGLINGS" in the ROM Control app so this ROM may be an Official one. I'm not sure
If you get ERROR 7 when installing this ROM here is the fix.
Big thanks to STELIX and AOKP team.
Fix for Rebot after Uninstalling apps:
Remove:
/system/lib/hw/keystore.msm8916.so and /system/lib64/hw/keystore.msm8916
Announcement:
Use the ROM from the link bellow instead of this one because this ROM is made from an old CM full with bugs that were fixed in the CM14 made by audahadi.
You can use this ROM but some features like off screen gestures and GPS are not working proprely
http://forum.xda-developers.com/zenfone-2-laser/development/rom-cyanogenmod-13-0-t3520986
vraciu' said:
I'm not the creator of this ROM as I just found it while searching AFH website. Also STELIX (the guy who made this ROM ) is shown in AOKP as one of "THE KANGLINGS" in the ROM Control app so this ROM may be an Official one. I'm not sure
If you get ERROR 7 when installing this ROM here is the fix.
Big thanks to STELIX and AOKP team.
Click to expand...
Click to collapse
I've been using this roms before you made this post because I am the first to test this roms from developer.
Sent from my ASUS_Z00RD using Tapatalk
Adhe_88 said:
I've been using this roms before you made this post because I am the first to test this roms from developer.
Sent from my ASUS_Z00RD using Tapatalk
Click to expand...
Click to collapse
Awesome.
I hope there is no problem if I made this thread and why there is not thread for this ROM? I know this is still buggy like the others ROM but we could help. Also it seems that there is the same problem on every ROM for this model based on CM13 so the problem could be the CM13 ROM? Just a thought.
vraciu' said:
Awesome.
I hope there is no problem if I made this thread and why there is not thread for this ROM? I know this is still buggy like the others ROM but we could help. Also it seems that there is the same problem on every ROM for this model based on CM13 so the problem could be the CM13 ROM? Just a thought.
Click to expand...
Click to collapse
I've hangouts to developers. Because developers do not have to make a thread on xda. This Roms smooth n no problem, but a bug in the security setting (fc). I thank you've made this thread ,dude
Sent from my ASUS_Z00RD using Tapatalk
Adhe_88 said:
I've hangouts to developers. Because developers do not have to make a thread on xda. This Roms smooth n no problem, but a bug in the security setting (fc). I thank you've made this thread ,dude
Sent from my ASUS_Z00RD using Tapatalk
Click to expand...
Click to collapse
Thanks! Also I think you are talking about the phone reboot bug that happens when you change the pattern or when you uninstall the app what can be fixed if you delete some files from system/
I made an update to the first post about what files need to be deleted
This based on source code from cm rom, right ?
vraciu' said:
Thanks! Also I think you are talking about the phone reboot bug that happens when you change the pattern or when you uninstall the app what can be fixed if you delete some files from system/
I made an update to the first post about what files need to be deleted
Click to expand...
Click to collapse
okay thanks dude it's problem solved
Sent from my ASUS_Z00RD using Tapatalk
hiimpig1 said:
This based on source code from cm rom, right ?
Click to expand...
Click to collapse
Yes
Here's patched updater-script for Z00ED device
Which version refers codename Z00ED/Z00RD??
They refer to ZenFone 2 Laser ZE500KL and ZenFone 2 Laser ZE500KG (codename Z00E) ?!
Thank you very much for the support
Is this smoother than CM13?
Does the bugs on CM13 fixed?(Sorry for my bad English)
pickandrew said:
which version refers codename z00ed/z00rd??
They refer to zenfone 2 laser ze500kl and zenfone 2 laser ze500kg (codename z00e) ?!
Thank you very much for the support
Click to expand...
Click to collapse
z00ed→ze500kl
z00rd→ze500kg
After installing rom phone wont trn on!
So i have the z00ed version Ze500kl , I installed through teamwin twrp making wipe data and flashing the zip changing the script updater for my version.After installing the phone wont turn on it is blocked to asus logo.Can anyone help me
henriune said:
So i have the z00ed version Ze500kl , I installed through teamwin twrp making wipe data and flashing the zip changing the script updater for my version. After installing the phone wont turn on it is blocked to asus logo.Can anyone help me
Click to expand...
Click to collapse
You don't need to flash the updater-script.rar. You use that if you get the ERROR 7 and you don't flash it you just unzip it and you should get a file called updater-script. After this you unzip the ROM zip file, and you replace the updater-script in META-INF/com/google/android directory and after you are done you rezip the ROM folder you uziped and flash the ROM.
Try to flash the ROM again (not the updater-script.rar) and see if is working and if you get the ERROR 7 then do what I said before.
Sorry for my bad writing
vraciu' said:
You don't need to flash the updater-script.rar. You use that if you get the ERROR 7 and you don't flash it you just unzip it and you should get a file called updater-script. After this you unzip the ROM zip file, and you replace the updater-script in META-INF/com/google/android directory and after you are done you rezip the ROM folder you uziped and flash the ROM.
Try to flash the ROM again (not the updater-script.rar) and see if is working and if you get the ERROR 7 then do what I said before.
Sorry for my bad writing
Click to expand...
Click to collapse
I will try and reply the results
Hi,
I'm trying to flash a ZE500KL.
I always get the error 7 ...
I tried with the patched updater-script inside the zip.
I tried the delete the first line of this script too.
The error is still present
An idea ?
Orange74 said:
Hi,
I'm trying to flash a ZE500KL.
I always get the error 7 ...
I tried with the patched updater-script inside the zip.
I tried the delete the first line of this script too.
The error is still present
An idea ?
Click to expand...
Click to collapse
I have no idea. Check your zip file again maybe you didn't apply the modifications.
Also check the link bellow and install that ROM because is more stable than this one
http://forum.xda-developers.com/zenfone-2-laser/development/rom-cyanogenmod-13-0-t3520986
Ok, I will test with this other rom.
Thank you !
Adhe_88 said:
I've been using this roms before you made this post because I am the first to test this roms from developer.
Sent from my ASUS_Z00RD using Tapatalk
Click to expand...
Click to collapse
Hi again. Can you talk to STELIX and ask him if he can update the ROM using the CM14 from here? This is a better version with all bugs from the old CM14 fixed. I plan to delete this thread and let him post his updated ROM in "Android Development" section.
Send me a reply I soon as the new thread is created so I can delete this ASAP.
Cheers!

[RECOVERY] [unofficial] TWRP 3.1.1-0 Asus Zenfone 5

Well since you are here you should know what is TWRP . Anyways here is Wikipedia For You
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
I wanted to use the latest version of TWRP and hence started working on this project. It did take a lot of time and failures and HELP..!! from a lot of people especially @tank0412 who helped me to solve a lot of errors during compiling.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Changelog for reference :
Changelog 3.1.1-0 : https://goo.gl/YHGVXu
Changelog 3.1.0 : https://goo.gl/JDR3EB
Download
Fastboot Image
Flashable Zip(coming soon)( Came )
How to Install :
Currently It is available in Fastboot mode only. I will upload a TWRP flashable zip ASAP..
1. Boot in fastboot mode (DroidBoot Mode aka Bootloader)
2. Connect your phone via USB cable and flash using the following command.
fastboot flash recovery recovery.img
3. That is it. Enjoy the latest Version of TWRP.
Credits
@tank0412 (for source and help)
@flex1911 (for his source)
TWRP Team
Source Code : device | kernel | vendor | TWRP
I have Made Some changes in sources. Will update them on Github Soon.
Bugs :
- let me know if you find any. I will try to fix them.
Note : I have flashed SUaddon, RR, Gapps, everything works fine
- I haven't tested flashing all the ROMs available for ZF5 so not sure if it can successfully Flash Them. Kindly let me know if it doesn't.
​
I have try build Twrp 3.1.1 but it error touch , you fix it how ?
https://github.com/hungximbexx/android_device_asus_zenfone5
amazing, support stock asus ???
adekcan said:
amazing, support stock asus ???
Click to expand...
Click to collapse
Haven't tested it yet.. why don't u try and let everyone know.. :good:
nguyenhung9x said:
I have try build Twrp 3.1.1 but it error touch , you fix it how ?
https://github.com/hungximbexx/android_device_asus_zenfone5
Click to expand...
Click to collapse
Can you give more information? Logs or a GIF?
You do not recognize my adopted storage, is there any configuration for this?
NylSky said:
You do not recognize my adopted storage, is there any configuration for this?
Click to expand...
Click to collapse
Try sending me a log. In twrp goto Advanced -> Copy log. Reboot.. send me recovery.log from internal storage.
narueon said:
Haven't tested it yet.. why don't u try and let everyone know.. :good:
Click to expand...
Click to collapse
latest twrp working fine . no touch issues or whatsoever was found by me. i was able to make a clean install of aicp nougat (without gapps). i can confirm its working .Thank you
edit : if you need i can upload a flashable zip as i flashed it using twrp
TWRP Flashable Zip
Update : TWRP flashable zip is Available in OP
here's the link : https://goo.gl/NtgDqC
Thanks you very much
nguyenhung9x said:
yes .
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Click to expand...
Click to collapse
Suggestion : please use services like pastebin or Zerobin for showing logs.
Well there is nothing wrong in these logs.. everything looks fine.
narueon said:
Suggestion : please use services like pastebin or Zerobin for showing logs.
Well there is nothing wrong in these logs.. everything looks fine.
Click to expand...
Click to collapse
Oke i am build twrp , i will send log later
Possible Fix
nguyenhung9x said:
Oke i am build twrp , i will send log later
Click to expand...
Click to collapse
If you still face the issue try reading this post by me. It is related to touch(I dnt know if you are facing this issue)
https://goo.gl/k1Wpni
narueon said:
Suggestion : please use services like pastebin or Zerobin for showing logs.
Well there is nothing wrong in these logs.. everything looks fine.
Click to expand...
Click to collapse
Log
https://drive.google.com/file/d/0B7enqhEcDpTkQVlrNHFuOHdqNjQ/view?usp=sharing
TWRP theme doesnt work with https://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
It says version not match even though same version 3.1.1 both twrp and theme
fuzuy said:
TWRP theme doesnt work with https://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
It says version not match even though same version 3.1.1 both twrp and theme
Click to expand...
Click to collapse
The problem was with the version in zip file(of theme). I have modified it. Download from here : https://goo.gl/eDgHAf
Send me link if you want any other theme to be compatible.
I will update TWRP soon so it accepts most of the themes.
narueon said:
The problem was with the version in zip file(of theme). I have modified it. Download from here : https://goo.gl/eDgHAf
Send me link if you want any other theme to be compatible.
I will update TWRP soon so it accepts most of the themes.
Click to expand...
Click to collapse
I prefer white or dight
link https://www.androidfilehost.com/?fid=817550096634777637 and https://www.androidfilehost.com/?fid=889764386195907621
---------- Post added at 05:19 PM ---------- Previous post was at 05:15 PM ----------
as i see on your modified zip(theme) you were changed only this line <themeversion>3</themeversion> right? so, i could apply on other zip to value 3
fuzuy said:
I prefer white or dight
link https://www.androidfilehost.com/?fid=817550096634777637 and https://www.androidfilehost.com/?fid=889764386195907621
---------- Post added at 05:19 PM ---------- Previous post was at 05:15 PM ----------
as i see on your modified zip(theme) you were changed only this line <themeversion>3</themeversion> right? so, i could apply on other zip to value 3
Click to expand...
Click to collapse
Yes.. it should work...
narueon said:
Try sending me a log. In twrp goto Advanced -> Copy log. Reboot.. send me recovery.log from internal storage.
Click to expand...
Click to collapse
Log.
NylSky said:
Log.
Click to expand...
Click to collapse
Is your external SD's size is 32 GB ??

Categories

Resources