[ROM][5.1.1][MS345] Unofficial CyanogenMod 12.1 for LG Leon - LG Leon ROMs, Kernels, Recoveries, & Other Develop

DISCLAIMER: Neither I, or anyone else is responsible for anything YOU do to your device. YOU are flashing this ROM at YOUR own risk!!!
This ROM is for MetroPCS LG Leon Only. What is LEPT-Development? We are a team of Developers who work on Low-End devices (Low-End Project Team Development)
@Unjustified Dev
@chevanlol360
@Jonhaney
@AndroidAddict||AA aka MikeHoncho
Requirements:
Root
Unlocked Bootloader (must be on stock 10B)
New TWRP Recovery
Version: 2015-07-12
Built By: @Unjustified Dev
Status: Stable
People to Thank:
@chevanlol360
@vm03 - Helping me when I have questions
@Jonhaney
@Unjustified Dev - Building and sharing his tree with the Leon users and fixing bugs
Testers:
antonioblee1
@bichofelix
If I forgot anyone, please let me know and I will fix it. If I got your contributions wrong then send me a PM and I will gladly fix it.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Working:
Almost Everything
Not Working:
Camera
GPS
You tell me??
Install (Make a backup once in recovery):
Download .zip and save to sdcard
Boot to recovery
Wipe Data/Factory Reset
Wipe Cache and Dalvik Cache
Install CM12 zip via New TWRP
Reboot
Downloads:
cm-12.1-20150820-UNOFFICIAL-ms345.zip
Older Versions:
cm-12.1-20150712-UNOFFICIAL-ms345.zip
cm-12.1-20150714-UNOFFICIAL-ms345.zip
GApps: http://forum.xda-developers.com/android/software/tk-gapps-t3116347
Device Tree:
https://github.com/TeamRegular/android_device_lge_c50-common
https://github.com/TeamRegular/android_device_lge_msm8916-common
Kernel:
https://github.com/TeamRegular/android_kernel_lge_msm8916

Thanks for the rom. I tried to pm you on your other account on Android forums but I don't think you saw it lol. Thanks for the work on the rom. I love it

Is it okay if I post logs? I have some errors in my catlog app. I'm not sure what the local even is, but I check it just for fun and I see what all the phone does. It's pretty cool to me, even though I don't know what any of it means lol

Any idea why I would be experiencing the "E:Error executing updater binary in zip "/external_sd/cm-12.1-20150714-UNOFFICIAL-ms345.zip'"? It's stopping me from flashing the rom.

Bobsteriffic said:
Any idea why I would be experiencing the "E:Error executing updater binary in zip "/external_sd/cm-12.1-20150714-UNOFFICIAL-ms345.zip'"? It's stopping me from flashing the rom.
Click to expand...
Click to collapse
You need to update TWRP to the blue one in the OP. If you are already using the blue one, then you possibly forgot to wipe data/factory reset first

I'm running TWRP 2.8.7.0 and I did wipe my data... what else could be causing it?
---------- Post added at 10:57 PM ---------- Previous post was at 10:55 PM ----------
AndroidAddict||AA said:
You need to update TWRP to the blue one in the OP. If you are already using the blue one, then you possibly forgot to wipe data/factory reset first
Click to expand...
Click to collapse
I'm running TWRP 2.8.7.0 and I did wipe my data... what else could be causing it?

I was able to flash the rom, but now it keeps crashing and rebooting before I can even initially set up WiFi.

Bobsteriffic said:
I was able to flash the rom, but now it keeps crashing and rebooting before I can even initially set up WiFi.
Click to expand...
Click to collapse
Did you clean install the rom? I did the advanced wipe, and it worked fine. The wipe that deletes all the cache, internal storage and all that. You may not need to do that, but that's what I did. Hope I helped.

GreenDinoXD said:
Did you clean install the rom? I did the advanced wipe, and it worked fine. The wipe that deletes all the cache, internal storage and all that. You may not need to do that, but that's what I did. Hope I helped.
Click to expand...
Click to collapse
When you say Advanced Wipe, did you select everything? I select everything except external SD, flash the rom, wipe the dalvik cahce, and yet the rom still crashes after about 5 seconds.

Hmm.. I haven't heard of anything like that happen to anyone.. Sorry I don't know alot, but you might be able to find a fix at androidforums. That's where the original thread is. Also, what company is your phone with?
Here's the link to Android forums: http://androidforums.com/index.php?threads/928887/

any option to have cm 12/12.1 on lg h340n?

KovaL1990MK said:
any option to have cm 12/12.1 on lg h340n?
Click to expand...
Click to collapse
Is that the T-Mobile variant? I've heard that people got it to work on T-Mobile version, but I think some people had problems also. The link I posted in my last post has the link. Maybe some of the posts will help you with that. Hope I helped.

No, this is not t-mobile version.

Can someone explain exactly how to unlock bootloader of LG Leon?

GreenDinoXD said:
Is that the T-Mobile variant? I've heard that people got it to work on T-Mobile version, but I think some people had problems also. The link I posted in my last post has the link. Maybe some of the posts will help you with that. Hope I helped.
Click to expand...
Click to collapse
I have been running on my T-Mobile variant, no issues ever except for battery bug which is known. Works way better than stock.
---------- Post added at 09:12 PM ---------- Previous post was at 08:37 PM ----------
Fobos531 said:
Can someone explain exactly how to unlock bootloader of LG Leon?
Click to expand...
Click to collapse
just root. Put twrp and install

Thanks for the answer. I own a LG Spirit 4G LTE (H440n) and if you compare it to LG Leon, they are basically the same devices. However, we at LG Spirit can't manage to unlock bootloader and I don't understand why. I rooted my LG Spirit using LG One Click Root. I can flash TWRP via Flashify but when I try to boot to recovery, I get secure boot failed; boot verification error, sth like that. What method do you use for rooting?

Anyone tried to install on other version LG Leon 4G lte?

KovaL1990MK said:
Anyone tried to install on other version LG Leon 4G lte?
Click to expand...
Click to collapse
What variant is the H340? I know the H320 is the Poland variant and I started to work on it but stopped since the tester vanished from the forums

@AndroidAddict||AA I have h340n variant

*** OP Updated ***
New 8-20-15 build
All credit for these fixes go to Unjustified-Dev
Fixed:
Battery Issues
CPU Issues
Still not working:
Camera
GPS

Related

[ROM][JB]MIUIAndroid for Atrix 3.2.1 [PORT]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For
Motorola Atrix
ROM INFO
Latest MIUI Version: 3.2.1
AOKP Version: Milestone 1 FINAL
NOTE!!! THIS VERSION DOES NOT HAVE THE MIUI TOOLBOX
Click to expand...
Click to collapse
How To Flash​
Place ROM onto phone storage
Reboot to recovery
Make a Nandroid
Install Rom: Wipe INSIDE ROM
When you select "Reboot Not", you'll get a CWM error, IGNORE IT
Install OPTIONS or Gapps
WIKI/FAQ Located: To be reworked
Click to expand...
Click to collapse
Bugs??:
KNOWN ISSUES:
Videocamera : Use VideoCam Illusion
Slight Lag possible on screen transitions
USB tether
The graphics related issues are due to not having proper drivers to use for this. Don't ask for an ETA on a fix. Moto won't be giving us the drivers, so there is no fix
If you need to report a NEW bug, report it once, and the next TWO people VERIFY it. I don't need everyone reporting same bug 20 times. I you can, provide me the following information:
Version you're using
What type of fwipe you did and what ROM you came from
Have you restored any data from something like Titanium Backup
What app is misbehaving and what you were doing when it started
Logcats<--THIS IS PREFERRED.
If you don't know how to logcat, go HERE and learn. This really nice guy took the time to write out a good how to
When you have a LOGCAT and would like to post it, please go to pastebin and post it in there, then LINK that location in this thread...I don't want to see them posted directly in here.
Click to expand...
Click to collapse
Downloads:
Rom file is located HERE
Options Chooser is Located HERE
My latest CWM: V1 as well as Aroma-Prep
can be downloaded HERE
Click to expand...
Click to collapse
Credits:​
MIUIAndroid-For this most Excellent Rom
scott.hart.bi=for helping me with source building
Jokersax11-for being my initial inspiration on Photon, being a cool guy, and helping me along in my early days
Amarullz=for creating the Aroma Installer
Spleef-for collaborating on those first builds that got me into Android and initial MIUI Ports
Stevendeb25-for his help with my first ports in Atrix
Alcapone263-for donating an Atrix coming to a home near me
Proxisuser-For the Guide we initially used on these builds
All my testers and users (especially ATRIXXIRTA, LoanerDave, and Unforgivenmercy)
Anyone else I may have forgotten
Click to expand...
Click to collapse
Kernel Source: HERE
Click to expand...
Click to collapse
See Post 2 for More Info
Mine
Mine 2
its b/c of your work, that i decided to resurrect my atrix, replacement screen showed up today, dismantling tomorrow but currently running your miui
Bill I ran this as described, everything boots and works fine, but it wont load the launcher, it just says miuihome isnt responding and it loops "loading" I'll wipe my cashe and report back.
jeffreygtab said:
Bill I ran this as described, everything boots and works fine, but it wont load the launcher, it just says miuihome isnt responding and it loops "loading" I'll wipe my cashe and report back.
Click to expand...
Click to collapse
Check the new build. It's up now
I had forgotten one of the bin files that is needed to get the MIUI shell to run, which in turn lets the Home app properly load
hi th3bill, thanks for the new build, will try it after reach home and feed back to u
@bill did u find any luck with porting the kernel from lg optimus 2x
Sent from my MB860 using xda premium
Let me answer that for you. No.
Language
Hi Th3Bill,thanks for your great works :good:
That Rom have multi-lang?
As soon as the call ends i loose my network signal after 15 seconds it comes back
Sent from my MB860 using xda premium
Hey Bill i'm getting random reboots after about 30 seconds on this, after full wipe tweaked, emmc.
I Got the log right after the reboot starts, lot of errors in the beginning. Trying a reflash. Same thing.
http://pastebin.com/x0CUzrvC
this might be better i think i caught it quicker, i cant seem to get a long enough log for all of it.
http://pastebin.com/m7vtA8fL
Just upgraded to 2.12.4, and it's the same issue as 2.12.7 originally: no sound through either the speaker, headphones or handset speaker. No Logcat because I'm not sure how to record a Logcat for the sound not working (as there's no specific fail point or error message).
i am a international atrix user
i got bootloop after flashing this rom and your Liquid Smooth rom too
my recovery is cwm touch
also, i have tried to use twrp 2.3.1 to flash it
but it doesn't work
what should i do?
ROM is Rebooting unpredictably.
andrea_marcello said:
Hi Th3Bill,thanks for your great works :good:
That Rom have multi-lang?
Click to expand...
Click to collapse
no multi unfortunately
mindstorms54 said:
i am a international atrix user
i got bootloop after flashing this rom and your Liquid Smooth rom too
my recovery is cwm touch
also, i have tried to use twrp 2.3.1 to flash it
but it doesn't work
what should i do?
Click to expand...
Click to collapse
What wipe did u do? Are you coming from a diff ROM?
Sent from my LG Optimus G
bottedumal said:
no multi unfortunately
Click to expand...
Click to collapse
Actually there are language packs at miuiandroid.com
Sent from my LG Optimus G
Th3Bill said:
What wipe did u do? Are you coming from a diff ROM?
Sent from my LG Optimus G
Click to expand...
Click to collapse
i made a full wipe and reformat /system and /data
Found my answer thanks fellows.

[MOD][HACK] Mobile Hotspot Hack for Xperia Z3V [23.0.E.1.44]

This mod enables the Mobile Hotspot feature on your Xperia Z3V without checking for tether entitlement. (In other words, you can use the mobile hotspot feature even if you are not paying for it on your Verizon account.)
Prerequisites:
1. You must have a rooted Xperia Z3V on build 23.0.E.1.44.
2. You must have the XZ Dual Recovery installed. http://nut.xperia-files.com/
3. Reboot into either TWRP or PHILZ and flash the attached file. View attachment TetherNativeTWRP.zip
4. Reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Under settings--> About Phone--> Build Number it will show "XperiaPop 1.0" That's because this mod is from my XperiaPop Rom. This shouldn't affect anything.
If I helped you in any way, don't forget to THANK ME!
Chance for lollipop update?
Also, this module was working for me on stock and updated 4.4 http://forum.xda-developers.com/moto-x/themes-apps/xposed-moto-x-4-4-native-tether-apk-t2601859
Testing now on lollipop as well without issue
Sorry, not to step on your thread by any means. Thanks so much for your time and development on the z3v
darker_slayer said:
Also, this module was working for me on stock and updated 4.4 http://forum.xda-developers.com/moto-x/themes-apps/xposed-moto-x-4-4-native-tether-apk-t2601859
Testing now on lollipop as well without issue
Sorry, not to step on your thread by any means. Thanks so much for your time and development on the z3v
Click to expand...
Click to collapse
I updated to lollipop a few weeks ago. Just today I booted into recovery to flash this file and I am now in a boot loop. Probably gonna have to factory reset now. Do not recommend flashing.
The file in the op or the xposed module I quoted?
darker_slayer said:
The file in the op or the xposed module I quoted?
Click to expand...
Click to collapse
The file in the OP. Took me hours to get my phone back... Guess I will have to revert to older firmware now, root, and then update to be lollipop rooted again. Dangit.
Go ahead and try the xposed module I linked next time around. Works for me, from the built in hotspot app as well as the power toggles homescreen widget by painless apps (which is what I regularly use)
please help... need mod for lollipop also.....
Just install xposed installer apk and download xtheter in the app........ Problem solved! Hit thanks
Does installing exposed cause any issues with 5.02 firmware?
Aphex33 said:
Does installing exposed cause any issues with 5.02 firmware?
Click to expand...
Click to collapse
No
GigaSPX said:
No
Click to expand...
Click to collapse
Hi, thanks for the confirmation. Can you send me a link to the compatible Xposed thread? Thx in advance.
Aphex33 said:
Hi, thanks for the confirmation. Can you send me a link to the compatible Xposed thread? Thx in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3034811
Next time, just Google it yourself. As far as which file it is, it's one of them that's just "--arm" and no numbers following it. I don't remember.
Aphex33 said:
Does installing exposed cause any issues with 5.02 firmware?
Click to expand...
Click to collapse
no issues dude... working fine.
p.shashikiran94 said:
no issues dude... working fine.
Click to expand...
Click to collapse
Awesome, thanks. Gonna back up and flash!
did you solve the problem?? I did the same as you did and I even did Factory Reset and still unable to get out of the loop! did I break my Z3v???
---------- Post added at 09:33 PM ---------- Previous post was at 09:25 PM ----------
Jdelta9889 said:
I updated to lollipop a few weeks ago. Just today I booted into recovery to flash this file and I am now in a boot loop. Probably gonna have to factory reset now. Do not recommend flashing.
Click to expand...
Click to collapse
I going through the same problem. I even trying to Factory Reset and it's not working. Did you ever get out of the infinite loop??
salouri said:
did you solve the problem?? I did the same as you did and I even did Factory Reset and still unable to get out of the loop! did I break my Z3v???
---------- Post added at 09:33 PM ---------- Previous post was at 09:25 PM ----------
I going through the same problem. I even trying to Factory Reset and it's not working. Did you ever get out of the infinite loop??
Click to expand...
Click to collapse
I have a different phone now, but I believe I had to reset the phone while pressing the buttons to get it into download mode.. not to be confused with recovery mode. When you are in download mode use the flash tool to flash original firmware. Let me know if you need more help.
Worked it out
Jdelta9889 said:
I have a different phone now, but I believe I had to reset the phone while pressing the buttons to get it into download mode.. not to be confused with recovery mode. When you are in download mode use the flash tool to flash original firmware. Let me know if you need more help.
Click to expand...
Click to collapse
Luckily I had the stock firmware on my SD card so I flashed it. (after switching to recovery from the boot loop). I found another post about hacking the Hotspot and that one worked just fine for me.
Thanks.
can you provide the link?

[ROM][MM] CandySiX [3.2][I9506][KS01LTE][6.0.1] 04.09.2016

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is CandySiX. Built straight from source with commits from a variety of different Sources/ROMS. We wanted to give the users a fun, fully customizable ROM. We aim to add more features as this project progresses.
Disclaimer: We here at The CandyShop are not responsible for any bricks you may obtain. Please follow the thread rules and steps and everything will be gravy. Remember, backing up before flashing is always recommended.
Installation Files
Rom
Open Gapps
Installation
1) Download CandySiX.zip
2) Download 6.0 Gapps (pico recommend)
3) Boot into recovery
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash the Rom and GAPPs
6) Reboot
XDAevDB Information
Candy SIX, ROM for S4 I9506
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Stable
Created 24.08.2016
Source Code Rom
Source Code Device
Source Code Kernel
Awesome initiative! Flashed RR yesterday, until the weekend I will try to flash this gem! Thanks again, and again, and again...
Sent from my GT-I9506 using Tapatalk
This is your surprise AOSP rom?
Hi Eliminater, have you got a link fot Swell Kernel ? thx
Thanks for initiative, Eliminater! Ive flashed in 08/23 (I found in your root android files). Excellent battery life and customizations. Only CMTE not working for me (anyone too?)
Bluetooth, data, wifi, IR working fine.
Is possible to put Swell Kernel link, please?
edit
Flashed again and no problems with CMTE.
Where is the link for the Swell Kernel?
jqm_ said:
Thanks for initiative, Eliminater! Ive flashed in 08/23 (I found in your root android files). Excellent battery life and customizations. Only CMTE not working for me (anyone too?)
Bluetooth, data, wifi, IR working fine.
Is possible to put Swell Kernel link, please?
Click to expand...
Click to collapse
Hm... CMTE have no problem for me. @@
Is this rom kernel supports volte plz tell.
Can u plz post me the screenshot of setting-more-mobile network/cellular network-(is there any option to enable volte of enhanced 4g calling) plz tell.
Can anyone please upload the Swell Kernel. I tried a normal Marshmallow AOSP kernel but its stuck in bootloop
I can not find the settings for recent applications
sorry guys there is no swall kernel for this device, its just a copy and past mistake fixed in op
recommended is arters kernel
Eliminater said:
sorry guys there is no swall kernel for this device, its just a copy and past mistake fixed in op
recommended is arters kernel
Click to expand...
Click to collapse
Thanks for the upload. Im a newbie so maybe you could help me out. I downloaded the kernel from the folder AOSP_M and its version is 11.3. Is that the right kernel?? Thanks again
SexyGandalf said:
Thanks for the upload. Im a newbie so maybe you could help me out. I downloaded the kernel from the folder AOSP_M and its version is 11.3. Is that the right kernel?? Thanks again
Click to expand...
Click to collapse
yes
stefanmaximum2 said:
yes
Click to expand...
Click to collapse
Tried it. Bootloop. Any ideas ?
SexyGandalf said:
Tried it. Bootloop. Any ideas ?
Click to expand...
Click to collapse
yea i just tried..bootloop not sure why
Settings/candy interface penultimate option. screenshot
To activate home button by recent settings, goes to Candy Interface/buttons/home key and set long press by recents.
Anyone with MMI codes problem? Signal in my country is a sh*t, maybe be this. Not yet tested calls.
About RAM: http://i.imgur.com/o20CJH9.jpg this is my new daily drive rom =D.
Soon I feedback my battery usage.
EDIT
About my MMI and call issues: fixed changing data settings to GSM/WCDMA/LTE. This settings are found by pressing in Data signal icon.
stefanmaximum2 said:
yea i just tried..bootloop not sure why
Click to expand...
Click to collapse
Maybe wrong kernel, or maybe the first boot takes longer that usual
stefanmaximum2 said:
yea i just tried..bootloop not sure why
Click to expand...
Click to collapse
For me, only arter's 11.1 works on tamasek build, never can boot up with 11.2 or 11.3. I'm using f2fs and seems arter's new build broked compatibility with f2fs. Try 11.1, maybe it boot up.
jefferzombie said:
For me, only arter's 11.1 works on tamasek build, never can boot up with 11.2 or 11.3. I'm using f2fs and seems arter's new build broked compatibility with f2fs. Try 11.1, maybe it boot up.
Click to expand...
Click to collapse
Ok give me 5 mins :good:
---------- Post added at 10:51 PM ---------- Previous post was at 10:25 PM ----------
SexyGandalf said:
Ok give me 5 mins :good:
Click to expand...
Click to collapse
Took me a little longer than 5 mins.... But still no effect, bootloop. Any other ideas?
SexyGandalf said:
Ok give me 5 mins :good:
---------- Post added at 10:51 PM ---------- Previous post was at 10:25 PM ----------
Took me a little longer than 5 mins.... But still no effect, bootloop. Any other ideas?
Click to expand...
Click to collapse
Did you flash kernel over 11.3? Try to do all from scratch, wipe, flash Rom, flash kernel and boot.

[HOW TO] Get Ting LTE or Other MVNO Data Working on CM13 ROMS

Ok so the issue of Ting LTE not working with CM13 ROMS has be bothering me for sometime now but this past weekend I finally found a fix for it.
Just as a side note the ROM I used with this fix was, OctOs Oct-MM R2 but in theory it should work with all CM13 ROMS for the L720. Also the tool I used is NOT MY WORK! It is the work of xda user, Deega and Buzbe2. I take no credit.
This fix requires the MVNO Slayer tool by Deega and Buzbe2 to work.
http://forum.xda-developers.com/showpost.php?p=65917850&postcount=30
These are the exact steps I took to flash the ROM and get data up and running.
1. Flash the CM13 ROM in twrp. (May work with CWM but i have not tested)
2. Without rebooting flash Gapps.
3. Reboot the device.
4. Once the device boots set up the device and wait for it to connect the cell tower. At this time you will not have data of any kind.
5. Reboot to recovery once more and flash MVNO Slayer. You must flash Buzbez2's version if you want Ting LTE.
6. Select the MVNO you wish and reboot.
7. Enjoy fully working LTE.
Screenshot of working Ting LTE on OctOS Oct-MM R2:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Worked for me, thanks!
I started at step 5 because I have been using CM13 for a few days already. My cellular network said “Sprint” and I could make and receive calls and texts but did not have LTE. Then I did steps 5 and 6 in this post and now my cellular network says “Ting” and LTE is working.
Data
Just out of curiosity,
Will this work with boost mobile phones? Sorry if it seems like a dumb question but I am new to all of this and started learning about ROMs last December.
Also will this work with Resurrection Remix 7.1 rom? I dont really know if it is CM13 or not?
Zer
ZerxeZ said:
Just out of curiosity,
Will this work with boost mobile phones? Sorry if it seems like a dumb question but I am new to all of this and started learning about ROMs last December.
Also will this work with Resurrection Remix 7.1 rom? I dont really know if it is CM13 or not?
Zer
Click to expand...
Click to collapse
Welcome to the world of Android. Yes this should work with Boot Mobile and in theory it will work on Resurrection Remix even though it's not cm 13 but I've not personally tested it
andyman2017 said:
Welcome to the world of Android. Yes this should work with Boot Mobile and in theory it will work on Resurrection Remix even though it's not cm 13 but I've not personally tested it
Click to expand...
Click to collapse
Could you please test it?!? I am actually testing it with Octo-N and it doesn't seem to be working. Thank you in advance
I just installed this for OctO-N on my sph720t. In SIM status it still says Sprint. I am a Ting user. Should I clear the cache or dalvik before installing the MVNOBuzbee zip?
How do you chose your mvno in step 6? Im still new to android modding
ScottaBlast said:
How do you chose your mvno in step 6? Im still new to android modding
Click to expand...
Click to collapse
When you begin the installation a pop up on TWRP will appear and give you multiple options of cellular company towers and when you pick it, it will continue the installation of MVNO.
ZerxeZ said:
When you begin the installation a pop up on TWRP will appear and give you multiple options of cellular company towers and when you pick it, it will continue the installation of MVNO.
Click to expand...
Click to collapse
That's weird when I did that no pop up popped up. I'll make sure TWRP is up to date and try again.
---------- Post added at 12:41 AM ---------- Previous post was at 12:39 AM ----------
ZerxeZ said:
When you begin the installation a pop up on TWRP will appear and give you multiple options of cellular company towers and when you pick it, it will continue the installation of MVNO.
Click to expand...
Click to collapse
This might be something bigger than just this file too. I remember the aroma version of Gapps not working for me, and that uses a gui to install the individual apps
ScottaBlast said:
That's weird when I did that no pop up popped up. I'll make sure TWRP is up to date and try again.
---------- Post added at 12:41 AM ---------- Previous post was at 12:39 AM ----------
This might be something bigger than just this file too. I remember the aroma version of Gapps not working for me, and that uses a gui to install the individual apps
Click to expand...
Click to collapse
Try also getting the latest gapps because I tried a new ROM and it wouldn't work on my older gapps till I updated.
trying to install mvno slavyer made twrp freeze. It then rebooted into my custom rom without showing a menu. According to this some of the new TWRPs have issues with the aroma installer, I'll try an old one https://forum.xda-developers.com/mo...hable-lte-fix-moto-e-6-x-boost-t3290719/page6
What phone and ROM are you trying to do and what android version u gonna use?
THANK YOU
Alright so I found out the issue and fixed it. My current version of TWRP didn't work with aroma installers. I regressed to version 3.0, did the steps, and now it works. Thanks man, I've been working on this for like a week
---------- Post added at 04:27 AM ---------- Previous post was at 04:25 AM ----------
ZerxeZ said:
What phone and ROM are you trying to do and what android version u gonna use?
Click to expand...
Click to collapse
I just solved this but since you're curious
SM - G900P (Samsung Galaxy S5)
They'll both be on nougat
Resurrection Remix or Cyanogen 14.1, gonna go install the latter and see how it fares (I know there's Lineage now but last I checked there were only nightly builds for my phone, not stable)
Oh in that case, I want to suggest a ROM that I'm using. It is amazing and runs better but RR has amazing customization unlike JDCteam LineageOS. But it is highly optimized.
Yeah I'm currently using Lineage, had too many issues with RR. However, one issue im still having is the inability to send text messages. Everything else works, but I just can't send them. I've been looking for other fixes, but I can't find any specifically for ting. Have you guys had any luck?

[ROM] [UNOFFICIAL] [10.0] [WAYNE] PixelExperience

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Mi 6X [wayne]​
What is this?
Pixel Experience is an AOSP/CAF based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Known issues
none
Download
Donate
Liked my work? Give me a beer
Translation
Help with project translation
​
********update**********
fix headset volume,qcrilmsgtunnel crash,dzone
**************************
Build author: THLIVSQAZ and TH779
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Telegram Group:https://t.me/PixelExperienceWayne
Thanks, let's take a look!
Dont even take the time downloading this... You cant get through the setup because it keeps crashing.
when the "dev" is not even testing his own build...
balazs312 said:
Dont even take the time downloading this... You cant get through the setup because it keeps crashing.
when the "dev" is not even testing his own build...
Click to expand...
Click to collapse
Well thks pal, I just so happy that my Wayne can get PE with Q. But uh when you say so I think I should just wait few more days. ?
balazs312 said:
Dont even take the time downloading this... You cant get through the setup because it keeps crashing.
when the "dev" is not even testing his own build...
Click to expand...
Click to collapse
we don't have this problem
Thanks, it works well
Here maybe a bug report:
"com.qualcomm.qcrimsgtunnel" stops everytime when I reboot the phone
But it seems nothing wrong so I can just leave it ?
Thanks again pal
fail to install
I got fastboot when installed this rom for my wayne, how can fix it? I want to use this rom so much Y.Y
balazs312 said:
Dont even take the time downloading this... You cant get through the setup because it keeps crashing.
when the "dev" is not even testing his own build...
Click to expand...
Click to collapse
Yup, happened to me too, apparently if you take out the SIM card the setup doesn't crash; testing it atm
hdkhoa1302 said:
I got fastboot when installed this rom for my wayne, how can fix it? I want to use this rom so much Y.Y
Click to expand...
Click to collapse
before you flash the rom ,make sure you are in pie,or you can flash xiaomi Firmware latest first
here is working great!! keep up with the good job
THLIVSQAZ said:
we don't have this problem
Click to expand...
Click to collapse
Thanks good work.
marciocruz15 said:
here is working great!! keep up with the good job
Click to expand...
Click to collapse
thanks, i waiting for get the offical
mexifunk said:
Thanks, let's take a look!
Click to expand...
Click to collapse
Thanks for this build, I don't know why but the first time i was having the FC with setup wizard, after a couple of days I tried again and is working great!
Thanks for this beautiful ROM, tried to install as instructed, worked perfectly!!
Can anyone give me instructions for flashing this rom please??, Like step by step, what gapps for this rom, twrp, magisk, ..... Sorry my bad english. Thank youu
Great work! Haven't found any bugs yet.
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
HSaputra_ said:
Can anyone give me instructions for flashing this rom please??, Like step by step, what gapps for this rom, twrp, magisk, ..... Sorry my bad english. Thank youu
Click to expand...
Click to collapse
Get twrp image from the official twrp site.
Boot into fastboot.
Use adb command to flash the image to recovery partition.
Boot into twrp recovery.
Format data if you came from MIUI.
Wipe Dalvik, cache, data, system, vendor.
Flash pixel experience zip.
Flash magisk if you want, but NO need to flash Gapps.
Reboot.
MarcusMario0605 said:
Great work! Haven't found any bugs yet.
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
Get twrp image from the official twrp site.
Boot into fastboot.
Use adb command to flash the image to recovery partition.
Boot into twrp recovery.
Format data if you came from MIUI.
Wipe Dalvik, cache, data, system, vender.
Flash pixel experience zip.
Flash magisk if you want, but NO need to flash Gapps.
Reboot.
Click to expand...
Click to collapse
yeah,you are right ,if you want to use magisk ,you can use magisk canary version
Hello, thank you for this work, I notice that the handsfree speaker does not work. And it gives me a lot of lag in the animations. I installed it without formatting, is that why it doesn't work properly?
manologs309 said:
Hello, thank you for this work, I notice that the handsfree speaker does not work. And it gives me a lot of lag in the animations. I installed it without formatting, is that why it doesn't work properly?
Click to expand...
Click to collapse
It should be fixed in the latest update regardless if you formatted the data or not.
so, if im not flashing magisk, i need to flash gapps? and which gapps i need to flash?
---------- Post added at 06:33 PM ---------- Previous post was at 06:12 PM ----------
i just follow the instruction and flash the rom, but why my phone reboot into the fastboot again after click reboot? did i miss something?

Categories

Resources