Database Develop

[Recovery] [YB1-X90L] TWRP

managed to get twrp working on YB1-X90L (Yoga Book - Android - LTE)
it's my very first try to create sth. like that, so I have absolutely no idea if everything works as it should. (took the twrp from yoga tab 3 pro root thread and changed it to fit my device mainly using this guide and some minor changes on my own)
if you want to try, you do it on your own risk. if sth. breaks, please don't blame me!
I strongly suggest not to flash it, but just boot it via fastboot:
1. download recovery
2. make sure adb is working
3. put the recovery into your adb folder
4. unlock bootloader (attention: unlocking the bootloader does a factory reset. so back up your data before) see here how to unlock bootloader
5. boot into bootloader (either: 'press power + volume up' or use adb typing 'adb reboot bootloader' in terminal
6. open terminal and naviagte to your adb folder (with recovery.img in it) then type: 'fastboot boot recovery_twrp.img' (adapt file name in case you changed it)
7. tablet should reboot and boot twrp
this method does not flash twrp permanently. your stock recovery remains untouched!
!!!BEFORE YOU USE TWRP TO CHANGE ANYTHING, PLEASE MAKE A FULL BACKUP!!!
download: View attachment recovery_twrp.zip
as always... I mainly relied on other people's work. so all credits go to them, e.g. twrp team, joesnose (twrp yoga tab 3pro) and HostZero
screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
as i said, it is a beginner's job. so here is what i noticed so far:
twrp freezes after a certain time when not used - I guess it is when twrp goes to 'standby', normally you wake it up again by sliding a button but it doesn't work here.

---reserved---

before you ask...
yes, of course, i have already tried to flash supersu, but unfortunately I had no luck so far. The script always aborts because it fails patching sepolicy of boot.img.
so if anyone knows a solution for this, feel free to help!
edit:
found another way to root, look here

Amazing! I never thought yb would have twrp. I've been looking for a way to install gapps since I bought yb. After my final I will definitely have a try.

Was it stable when you flashed some zip?

AndyVerne said:
Was it stable when you flashed some zip?
Click to expand...
Click to collapse
did backup 2 times and restored all partitions a several times which worked well.
only tried to install supersu, which in general went well although su couldn't patch boot.img (but has nothing to do with twrp I think)

danjac said:
did backup 2 times and restored all partitions a several times which worked well.
only tried to install supersu, which in general went well although su couldn't patch boot.img (but has nothing to do with twrp I think)
Click to expand...
Click to collapse
All right, I wil try to install supersu after take my final exam ,too .
I believe there will be a way to solve it .
(oh ,god , the root seems to have sloved , nice job!)

danjac said:
did backup 2 times and restored all partitions a several times which worked well.
only tried to install supersu, which in general went well although su couldn't patch boot.img (but has nothing to do with twrp I think)
Click to expand...
Click to collapse
I have one question, after I unlock the bootloader, it occurs the "intel ....untrusted,will boot in 5 seconds ", I wanna know how to lock the bootloader again.

AndyVerne said:
I have one question, after I unlock the bootloader, it occurs the "intel ....untrusted,will boot in 5 seconds ", I wanna know how to lock the bootloader again.
Click to expand...
Click to collapse
to lock the bootloader you must have stock recovery...hopefully you din't flash twrp.
I do not really know, whether locking the bootloader will work flawlessly due to the changes made by root
when you lock the bootloader it will once more wipe all data - so back it up before, normally root should stay (although I don't know for sure)
to lock the bootloader just use the following command in terminal:
Code:
fastboot flashing lock
if you are not sure, try to search xda for more information about relocking.

danjac said:
to lock the bootloader you must have stock recovery...hopefully you din't flash twrp.
I do not really know, whether locking the bootloader will work flawlessly due to the changes made by root
when you lock the bootloader it will once more wipe all data - so back it up before, normally root should stay (although I don't know for sure)
to lock the bootloader just use the following command in terminal:
if you are not sure, try to search xda for more information about relocking.
Click to expand...
Click to collapse
Oh, I gave it up... Thanks

Do not get me wrong but you say make a full back up with twrp before doing anything but based on your description twrp cant be installed without unlocking the bootloader which in return erases the device.
Is this catch22 or am I missing something here?
danjac said:
managed to get twrp working on YB1-X90L (Yoga Book - Android - LTE)
it's my very first try to create sth. like that, so I have absolutely no idea if everything works as it should. (took the twrp from yoga tab 3 pro root thread and changed it to fit my device mainly using this guide and some minor changes on my own)
if you want to try, you do it on your own risk. if sth. breaks, please don't blame me!
I strongly suggest not to flash it, but just boot it via fastboot:
1. download recovery
2. make sure adb is working
3. put the recovery into your adb folder
4. unlock bootloader (attention: unlocking the bootloader does a factory reset. so back up your data before) see here how to unlock bootloader
5. boot into bootloader (either: 'press power + volume up' or use adb typing 'adb reboot bootloader' in terminal
6. open terminal and naviagte to your adb folder (with recovery.img in it) then type: 'fastboot boot recovery_twrp.img' (adapt file name in case you changed it)
7. tablet should reboot and boot twrp
this method does not flash twrp permanently. your stock recovery remains untouched!
!!!BEFORE YOU USE TWRP TO CHANGE ANYTHING, PLEASE MAKE A FULL BACKUP!!!
download: View attachment 3994659
as always... I mainly relied on other people's work. so all credits go to them, e.g. twrp team, joesnose (twrp yoga tab 3pro) and HostZero
screenshots:
View attachment 3994696
View attachment 3994697
View attachment 3994698
as i said, it is a beginner's job. so here is what i noticed so far:
twrp freezes after a certain time when not used - I guess it is when twrp goes to 'standby', normally you wake it up again by sliding a button but it doesn't work here.
Click to expand...
Click to collapse
---------- Post added at 09:33 PM ---------- Previous post was at 09:30 PM ----------
So this process messed up your system? Not sure if I understand what is going on there.
AndyVerne said:
I have one question, after I unlock the bootloader, it occurs the "intel ....untrusted,will boot in 5 seconds ", I wanna know how to lock the bootloader again.
Click to expand...
Click to collapse

hajkan said:
Do not get me wrong but you say make a full back up with twrp before doing anything but based on your description twrp cant be installed without unlocking the bootloader which in return erases the device.
Is this catch22 or am I missing something here?
---------- Post added at 09:33 PM ---------- Previous post was at 09:30 PM ----------
So this process messed up your system? Not sure if I understand what is going on there.
Click to expand...
Click to collapse
to your first question:
1. well, here we are not talking about backing up your user data but your rom (stock rom so to speak). if anything goes wrong you can always go back to stock.
2. if you want to peform ota update you can't do it with modified system (ota will fail), so normally you must go back to stock, update, root again
to your second question:
it's just a warning that your bootloader is unlocked, nothing more. it shows with every boot and after 5secs just boots normally.
you can easily find out about the advantages and disadvantages of an unlocked bootloader e.g. here on xda.

I can't thank you enough for this. I live in China and was only able to buy the Chinese version of the Yoga Book, which doesn't come with Google Services installed. However, using this TWRP recovery I was able to flash Google Services (and get root) which makes my Yoga Book so much more useful! Thanks so much!

Have got as far as flashing TWRP, but find that any attempt to backup - to internal storage or sdcard - is cancelled. Have checked on googz but cannot find any specific info. Any help would be appreciated

zamzenos said:
Have got as far as flashing TWRP, but find that any attempt to backup - to internal storage or sdcard - is cancelled. Have checked on googz but cannot find any specific info. Any help would be appreciated
Click to expand...
Click to collapse
which yoga book version?
did you flash it or booted it?
how about a log (--> advanced --> copy to sdcard)?
is 'mount read-only' in 'mount' deactivated?

danjac said:
which yoga book version?
did you flash it or booted it?
how about a log (--> advanced --> copy to sdcard)?
is 'mount read-only' in 'mount' deactivated?
Click to expand...
Click to collapse
Left it overnight and tried again today. It's OK this time. I fiddled with settings, mainly to deselect the read-only system option. Each stage of this process has been pretty frustrating (I'm used to hacking sammy devices - this is first and last time with a lenny). Stuck now trying to get root - it will probably take until tomorrow! btw, ver is YB1 X90F (Europe/UK).
But thanks for taking the trouble to reply. And thanks for giving us the opportunity to hack the YB.

Worked on the wifi version too.
You may not be a developer but you are a pretty smart guy to be able to figure this out on your own, my hat is off to you. I rooted my wifi version of Yoga Book using your instruction and the only notable issue I ran into in the process was that i had to install new Android usb drivers in Windows to get the reboot-bootloader command to work, other than that little hiccup it worked like a charm. One other issue I ran into that was of my own making was that Titanium backup encouraged me to upgrade super user which led to a soft brick, thankfully I'd backed my book up and was able to restore it.
Thanks for taking the time to share this with us because rooting made this device a much better experience.

hi all, Im reslly happy to see the yb can really root. but all i want is to have the google app work on my yb china version.
am not a techy, hence most of the insturction mention here is very strange to me.
if anyone can help to write down the step by step on how to flash twrp and install google app to yb will be great thanks..
please...

kakit78 said:
hi all, Im reslly happy to see the yb can really root. but all i want is to have the google app work on my yb china version.
am not a techy, hence most of the insturction mention here is very strange to me.
if anyone can help to write down the step by step on how to flash twrp and install google app to yb will be great thanks..
please...
Click to expand...
Click to collapse
If you just want to install gapps, there is no need to root.
1. download gapps from opengapps.org. select x86_64 6.0 version. select nano or micro version if only want google play to be worked.
2. put the gapps zip file into your root of your YB.
3. just follow the instructions of this post to boot into TWRP
4. In TWRP, select install zip file from SD, then select the gapps to install
5. after finish, reboot to the system.
6. Done!
---------- Post added at 08:48 AM ---------- Previous post was at 08:44 AM ----------
The problem is that I fail to OTA updated after booting into TWRP and install gapps. Anyone can helps?

@danjac Hi, did you keep the boot to bios option in the reboot menu?

unofficial twrp for Nokia7+ By Dhruv and Maher

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
hello guys in last few daysME/Mr. Dhruv worked so hard to finally got Twrp ready to use so far we built Twrp for nokia 6.1 2018 and nokia 7 plus
Notice1:
both phones they share same kernel and tree and both have A/B partitions, this twrp based on nokia7+
to prevent issues its better to flash it in both slot, because I/We can not know on which partition you are
Notice2:
take a backup for your data and your important files or folders before you start your Warrenty will be lost
Notice3
to reboot recovery from buttons follow this steps:
first of all you have to plug your phone to pc or charger and switch off your phone totally then press and hold volume up and power at the same time untill the bootloader`s unlock message disappear after that release power button and keep holding volume up
there you are
Notice4
to boot to fastboot switch off your phone plug it to charger or pc wait till the screen charging become black now press and hold volume down and power buttons you`ll get fastboot page there you are
Notice5:
so far no issues but if you find any please let us know
and Dhruv working on complete Twrp fully funactions he will release it soon
Notice6:
If you have different model you can contact with me on Telegram link
https://t.me/Maherabed
Twrp Nokia 7 plus TA-1046
thanks to Nick he keep testing till we boot it up
https://drive.google.com/file/d/1k2G3ERyxBFJ3bTmGtKjCpF5i7vk9prbf/view?usp=sharing
Twrp Nokia 7 plus TA-1046 P DP4
https://drive.google.com/file/d/1jA7XRIXfm9zGb_YMWZq0UBZOWXOF1Iah/view?usp=sharing
Twrp Nokia 7 plus TA-1062 P DP4
https://drive.google.com/file/d/11SIAYHTto6A5qgsq_8W-gTZHkn3Zim0f/view?usp=sharing
INSTALLATION
required :
1- unlocked bootloader
2- ADB and fastboot
3- enable usb debugging in developer settings.
4- use those codes
Code:
adb shell
Code:
reboot bootloader
now we flash it in slot a
Code:
fastboot flash boot_a <image`s name>.img‏
after that we flash it also in slot b
Code:
fastboot flash boot_b <image`s name>.img‏
then
Code:
fastboot reboot
it will boot to system dirctly so reboot to recovery
Code:
adb reboot recovery
5- install magisk.zip v16.7 download it with latest apk from here (( thanks for Magisk developers )
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
6- if you like our work hit like and if you want to share cup of cappuccino with me
paypal.me/MaherAbdulghani
Nokia globle group on Telegram go here
https://t.me/joinchat/EDAqGkPkzNQG5b7q28b1yw
Nokia 7 plus globle group on Telegram go here
https://t.me/joinchat/ItSJYkcNkKEXqcUCAaWlyg
Special thanks to
Team Win Recovery Project developers
big thanks to my mate Dhruv for hard work on this twrp

Reserved

#Reserved

N7+ TA-1062, stuck on "Nokia" boot screen after flashing this. Any help getting back to a functioning system?

Nokia 7+ global group on Telegram
https://t.me/joinchat/ItSJYkcNkKEXqcUCAaWlyg

How to unlock bootloader
---------- Post added at 04:11 AM ---------- Previous post was at 04:10 AM ----------
Is there picturs of the recovery
And please make video about how to do that
---------- Post added at 04:12 AM ---------- Previous post was at 04:11 AM ----------
And when i do that can i receive update from nokia

OK. It asked for password to decrypt the data. Pressed cancel and rebooted. Now, it goes into Download Mode every time

whoknowshimself said:
OK. It asked for password to decrypt the data. Pressed cancel and rebooted. Now, it goes into Download Mode every time
Click to expand...
Click to collapse
password should be the same that you use to unlock the phone when it's up and running. for me it's a pin. at least this is how it worked on my nexus 5x

Great. Now I am stuck in download mode. Does not boot into system anymore.
donjamal said:
password should be the same that you use to unlock the phone when it's up and running. for me it's a pin. at least this is how it worked on my nexus 5x
Click to expand...
Click to collapse

whoknowshimself said:
Great. Now I am stuck in download mode. Does not boot into system anymore.
Click to expand...
Click to collapse
After rebooting when I didn't have magisk installed after installing PixelExperience img, I am now also stuck in download mode whenever I try to reboot.
EDIT: After switching which partition to boot from a couple of times in reboot menu, I finally got back into a rom. I would suggest that "Whoknowshimself" try to do similar.

Sorry guys you all stuck on Download mode because of the command was written wrong
It was falsh but it's should be flash now all is okay

In case you got download mode loop try to active slot a for june release
Slot b for July
Fastboot --set_active=a
Fastboot --set_active=b

if i'm not mistaken, android version doesn't matter, does it? can i use this on P DP4?

I flashed everything correctly and was able to get into several ROM setups; PixelExperience, RR.
On every ROM though, SIM cards do not work in any slot.
I am in the process of getting back to stock and then I will make a rooted backup of the system with no user setup yet and I will upload the backup somewhere so that others can benefit from my experiments today.
EDIT: It will take me a while to get the backup uploaded etc... so don't hold your breath anybody
EDIT 2: It will be quicker and easier for people to just do the backup themselves before messing around flashing stuff. I can still upload it at some point if someone is in need, but just MAKE SURE YOU TAKE A BACKUP BEFORE ANYTHING ELSE.

Too late for me. I tried switching the active slot but to no avail. I had a backup but it is corrupted
I cannot even flash the ROM through OST. It says ROM does not match.
Doktaphex said:
I flashed everything correctly and was able to get into several ROM setups; PixelExperience, RR.
On every ROM though, SIM cards do not work in any slot.
I am in the process of getting back to stock and then I will make a rooted backup of the system with no user setup yet and I will upload the backup somewhere so that others can benefit from my experiments today.
EDIT: It will take me a while to get the backup uploaded etc... so don't hold your breath anybody
EDIT 2: It will be quicker and easier for people to just do the backup themselves before messing around flashing stuff. I can still upload it at some point if someone is in need, but just MAKE SURE YOU TAKE A BACKUP BEFORE ANYTHING ELSE.
Click to expand...
Click to collapse

whoknowshimself said:
Too late for me. I tried switching the active slot but to no avail. I had a backup but it is corrupted
I cannot even flash the ROM through OST. It says ROM does not match.
Click to expand...
Click to collapse
Everything working perfectly for me
Can you please tell me what model you guys have
Mine is TA-1046 JULY RELEASE

donjamal said:
if i'm not mistaken, android version doesn't matter, does it? can i use this on P DP4?
Click to expand...
Click to collapse
Better not I'll manage to edit to make it work on P DP4

TA-1062 May. Cannot boot anymore. Cannot flash using OST
Maherabed1986 said:
Everything working perfectly for me
Can you please tell me what model you guys have
Mine is TA-1046 JULY RELEASE
Click to expand...
Click to collapse

whoknowshimself said:
TA-1062 May. Cannot boot anymore. Cannot flash using OST
Click to expand...
Click to collapse
The way I fixed mine was to flash the patched July boot.img from the root your a/b partitions to both boot a and boot b.
I then downloaded all the zips to downgrade to Oreo from the official firmware and ota thread.
I used the latest rollback from that thread and then the 3 ota patches.
I side-loaded each one and booted the phone between each zip flash.
I am now at stock 8.1 fully rooted with magisk 16.7 with safety net passing completely.

Doktaphex said:
The way I fixed mine was to flash the patched July boot.img from the root your a/b partitions to both boot a and boot b.
I then downloaded all the zips to downgrade to Oreo from the official firmware and ota thread.
I used the latest rollback from that thread and then the 3 ota patches.
I side-loaded each one and booted the phone between each zip flash.
I am now at stock 8.1 fully rooted with magisk 16.7 with safety net passing completely.
Click to expand...
Click to collapse
Magisk v16.7 caused random power off after 5 minutes so i prefer using 16.6

[ROM][9.0] Android Open Source Illusion Project [Pre-OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android Open Source illusion Project
What is this?
AOSiP is a quality custom ROM based purely on Google AOSP source since 6.0 release. Twisted with the latest features and blended with stability. We strive for perfection and it shows.
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
NFC
Lights
Sound / vibration
Known issues
VoLTE/IMS not working
Downloads:
AOSiP
TWRP (use latest version)
GApps
Source Code:
[url]https://github.com/AOSiP-Devices/device_huawei_kirin970-common[/URL]
[url]https://github.com/AOSiP-Devices/device_huawei_berkeley[/URL]
[url]https://github.com/AOSiP-Devices/vendor_huawei[/URL]
Team Illusion:
Josh Fox (xlxfoxxlx)
Akhil Narang
Sri Harsha (@srisurya95)
Shreesha Murthy
Brett Montague
Telegram channel
Stay tuned for something awesome
Credit/Thanks:
Everyone at AOSiP
@LuK1337
@flex1911
@dladz for being my tester for the P20 Pro!
And everyone else who helped with the trees!
​
XDA:DevDB Information
Android Open Source Illusion Project, ROM for the Huawei P20 Pro
Contributors
moto999999
Source Code: [url]https://github.com/AOSiP[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 9 Firmware
Version Information
Status: Stable
Created 2019-06-22
Last Updated 2019-06-22

Ahoy there, good to see you.
ROM is running, brilliantly.
:good:

Nice ROM.. work.. my problem is TWRP DECRYPTION ç.ç after install this rom i have problem to read file i have all folder encrypted

Does this rom require specific Pie firmware or are all compatible? I have tried a few roms on here an had nothing but problems trying to get them to boot etc even on required firmwares an dont wanna go through the nightmare of restoring it to stock functuality.

mishmac said:
Does this rom require specific Pie firmware or are all compatible? I have tried a few roms on here an had nothing but problems trying to get them to boot etc even on required firmwares an dont wanna go through the nightmare of restoring it to stock functuality.
Click to expand...
Click to collapse
I'm on 190 and it works on that, I would say that or above. Untested. Also works on 232 I think. Clumsy has it installed

First official build is up, enjoy!
Download: https://aosip.dev/charlotte

Crasim said:
Nice ROM.. work.. my problem is TWRP DECRYPTION ç.ç after install this rom i have problem to read file i have all folder encrypted
Click to expand...
Click to collapse
To update use the updater tab in settings, it should work even if you're encrypted
mishmac said:
Does this rom require specific Pie firmware or are all compatible? I have tried a few roms on here an had nothing but problems trying to get them to boot etc even on required firmwares an dont wanna go through the nightmare of restoring it to stock functuality.
Click to expand...
Click to collapse
Every Pie firmware should work just fine (old or new)

moto999999 said:
First official build is up, enjoy!
Download: https://aosip.dev/charlotte
Click to expand...
Click to collapse
Any changes to this one?m

moto999999 said:
To update use the updater tab in settings, it should work even if you're encrypted
So with the new update does it now work even if I have everything encrypted?
Click to expand...
Click to collapse

dladz said:
Any changes to this one?m
Click to expand...
Click to collapse
Nope. Well, it's now official and OTA will work
Crasim said:
So with the new update does it now work even if I have everything encrypted?
Click to expand...
Click to collapse
You won't be able to see your files within TWRP but updates through the updater will work

I'm going to try this soon, does anybody have a guide?
Does it require stock recovery to be flashed then wipe after instal or before installing rom?

mishmac said:
I'm going to try this soon, does anybody have a guide?
Does it require stock recovery to be flashed then wipe after instal or before installing rom?
Click to expand...
Click to collapse
Before installation
------------------------------
Make a back up of your data.
Download the ROM and Mind the G-Apps.
Installation
------------------
1. Copy the ROM and G-Apps to your ADB folder.
2. Install TWRP via fastboot in bootloader, I used official 3.3.0.2
fastboot flash recovery_ramdisk "name of recovery"
3. Boot to TWRP.
Fastboot reboot (pull cable and hold up straight away)
4. Push both ROM and G-Apps to /tmp from the ADB folder.
ADB push "name of ROM" /tmp
ADB push "name of G-Apps" /tmp
5. Perform a wipe in TWRP.
6. Install ROM and G-Apps.
(Not sure if the below is necessary but I did it)
7. Boot to bootloader and install stock recovery.
Fastboot flash recovery_ramdisk "name of stock recovery"
8. Boot to stock recovery and wipe / data factory reset and wipe cache.
Boot ROM.
Rooting
-------------
I used the latest magisk but magisk manager 7.2.0.
Install via TWRP, you'll need to reinstall TWRP again..
From this point OTA's will take care of further updates so no need to wipe again.

So no changes in update script needed?
Sorry for the million questions but i have never hated a phone so much as this trying to flash roms an having to restore to stock etc.
I know this isn't developers problem but trying to save myself hours of the possibility of it going wrong yet again an trying to restore stock....
Appreciate everyone's help as this looks amazing, i despise EMUI.

I have a problem , my storage is crypted,i also can't install google chrome , can't save any photo , cant do anything
---------- Post added at 04:58 PM ---------- Previous post was at 04:40 PM ----------
dladz said:
Before installation
------------------------------
Make a back up of your data.
Download the ROM and Mind the G-Apps.
Installation
------------------
1. Copy the ROM and G-Apps to your ADB folder.
2. Install TWRP via fastboot in bootloader, I used official 3.3.0.2
fastboot flash recovery_ramdisk "name of recovery"
3. Boot to TWRP.
Fastboot reboot (pull cable and hold up straight away)
4. Push both ROM and G-Apps to /tmp from the ADB folder.
ADB push "name of ROM" /tmp
ADB push "name of G-Apps" /tmp
5. Perform a wipe in TWRP.
6. Install ROM and G-Apps.
(Not sure if the below is necessary but I did it)
7. Boot to bootloader and install stock recovery.
Fastboot flash recovery_ramdisk "name of stock recovery"
8. Boot to stock recovery and wipe / data factory reset and wipe cache.
Boot ROM.
Rooting
-------------
I used the latest magisk but magisk manager 7.2.0.
Install via TWRP, you'll need to reinstall TWRP again..
From this point OTA's will take care of further updates so no need to wipe again.
Click to expand...
Click to collapse
I need your help old friend

mishmac said:
So no changes in update script needed?
Sorry for the million questions but i have never hated a phone so much as this trying to flash roms an having to restore to stock etc.
I know this isn't developers problem but trying to save myself hours of the possibility of it going wrong yet again an trying to restore stock....
Appreciate everyone's help as this looks amazing, i despise EMUI.
Click to expand...
Click to collapse
No nothing like that mate. Just make sure you back up.. and click the thanks button for those who helped.
I had to edit the original because it was made for the Honor view 10 but you will be fine now as it's been made for the pro.
---------- Post added at 05:47 PM ---------- Previous post was at 05:45 PM ----------
benkiller47 said:
I have a problem , my storage is crypted,i also can't install google chrome , can't save any photo , cant do anything
---------- Post added at 04:58 PM ---------- Previous post was at 04:40 PM ----------
I need your help old friend
Click to expand...
Click to collapse
Yea I had this problem myself, I believe it was because I didn't use the stock recovery to wipe before the first boot.
Did you follow instructions?
Your SD partition had encryption from a previous time.
If you need to return to stock then follow the guide in my sig.

dladz said:
No nothing like that mate. Just make sure you back up.. and click the thanks button for those who helped.
I had to edit the original because it was made for the Honor view 10 but you will be fine now as it's been made for the pro.
---------- Post added at 05:47 PM ---------- Previous post was at 05:45 PM ----------
Yea I had this problem myself, I believe it was because I didn't use the stock recovery to wipe before the first boot.
Did you follow instructions?
Your SD partition had encryption from a previous time.
If you need to return to stock then follow the guide in my sig.
Click to expand...
Click to collapse
Hi , i don't have any sd card , i followed instruction , i will try to follow your rescue guide thanks you
Can you come to telegram ?
Also which version of software should i use for rescue guide since i'm coming from last version aosip 9.0
Can I use the one you uploaded ?
Thanks you veryyy much :angel:

dladz said:
I had to edit the original because it was made for the Honor view 10 but you will be fine now as it's been made for the pro.
---------- Post added at 05:47 PM ---------- Previous post was at 05:45 PM ----------
Click to expand...
Click to collapse
ofc
https://github.com/AOSiP-Devices/device_huawei_berkeley
https://github.com/AOSiP-Devices/de...f149c67bc8d4ad3b757698/AndroidProducts.mk#L17
https://github.com/AOSiP-Devices/de...82e0b18fcf149c67bc8d4ad3b757698/device.mk#L20
https://github.com/AOSiP-Devices/de...82e0b18fcf149c67bc8d4ad3b757698/device.mk#L29
https://github.com/AOSiP-Devices/de...f149c67bc8d4ad3b757698/BoardConfig.mk#L19-L22
https://github.com/AOSiP-Devices/de...0b18fcf149c67bc8d4ad3b757698/aosip.mk#L27-L32
its a mix of berkeley and HonorView 10 as it is.
benkiller47 said:
Hi , i don't have any sd card , i followed instruction , i will try to follow your rescue guide thanks you
Can you come to telegram ?
Also which version of software should i use for rescue guide since i'm coming from last version aosip 9.0
Can I use the one you uploaded ?
Thanks you veryyy much :angel:
Click to expand...
Click to collapse
just flash stock huawei recovery, any version will do. format data and reboot. fixed.

kessaras said:
its a mix of berkeley and HonorView 10 as it is.
.
Click to expand...
Click to collapse
Well the one I edited would not flash as it was.
Either way, this one works is my point.
---------- Post added at 08:53 PM ---------- Previous post was at 08:51 PM ----------
benkiller47 said:
Hi , i don't have any sd card.
:
Click to expand...
Click to collapse
It's the internal memory, listed as SD card within a file explorer.

mishmac said:
So no changes in update script needed?
Sorry for the million questions but i have never hated a phone so much as this trying to flash roms an having to restore to stock etc.
I know this isn't developers problem but trying to save myself hours of the possibility of it going wrong yet again an trying to restore stock....
Appreciate everyone's help as this looks amazing, i despise EMUI.
Click to expand...
Click to collapse
You don't need to change anything from the zip, it'll work on the P20 Pro out of the box
To push the zip you can use adb sideload or an external sd card and right after you flash the rom for the first time, wipe data using the stock recovery

Can I use an Open Gapps instead of the MindTheGapps ?
Does this rom have a deep sleep problem? I mean the situation when device cannot go to the deep sleep mode after charging the phone or heavy use and I need to reboot my phone to start deep sleep working again.

Mi 9 unlocked flashed TWRP can't copy ROM

Hi all!
I bougth my Mi 9 in China. Have it unlocked. Flashed general TWRP 3.3.0 cepheus from miui.eu link.
When I boot in recovery and go to sdcard I don't see my regular file folder structure anymore. There are folders with numbers and letters only. Is it encrypted now?!
Then when I was tinkering with new TWRP, the phone just got stuck in the loop. It boots in loop to recovery. I can access fastboot
But I cannot copy files thru recovery when data is mounted. Neither uploading ROM works with adb.
What can I do now?
I din't wipe anything. Just reflashed the TWRP and it got stuck in loop and loads recovery.

Cheshire_Puss said:
Hi all!
I bougth my Mi 9 in China. Have it unlocked. Flashed general TWRP 3.3.0 cepheus from miui.eu link.
When I boot in recovery and go to sdcard I don't see my regular file folder structure anymore. There are folders with numbers and letters only. Is it encrypted now?!
Then when I was tinkering with new TWRP, the phone just got stuck in the loop. It boots in loop to recovery. I can access fastboot
But I cannot copy files thru recovery when data is mounted. Neither uploading ROM works with adb.
What can I do now?
I din't wipe anything. Just reflashed the TWRP and it got stuck in loop and loads recovery.
Click to expand...
Click to collapse
You can try format data and reboot to recovery and try once more to copy files
P.S Sorry for my bad english
P.S.S i am using twrp by manuforio

Cheshire_Puss said:
Hi all!
I bougth my Mi 9 in China. Have it unlocked. Flashed general TWRP 3.3.0 cepheus from miui.eu link.
When I boot in recovery and go to sdcard I don't see my regular file folder structure anymore. There are folders with numbers and letters only. Is it encrypted now?!
Then when I was tinkering with new TWRP, the phone just got stuck in the loop. It boots in loop to recovery. I can access fastboot
But I cannot copy files thru recovery when data is mounted. Neither uploading ROM works with adb.
What can I do now?
I din't wipe anything. Just reflashed the TWRP and it got stuck in loop and loads recovery.
Click to expand...
Click to collapse
I had the same pain in the butt
You are facing two issues:
1. You must have the correct TWRP
2. You must follow the correct steps
See my post here:
https://forum.xda-developers.com/Mi...iaomi-mi-9-t3905825/post79905261#post79905261
I am curently on RevolutionOS for MIUI.
I like it because it keeps the Fingerprint Reader and the AI Button working.
Also all the nice features of MIUI are retained but it adds more useful features.
Feel free to ask me for help if you have further trouble or if you run into problems with the GPS - I have a fix for that.
You can possibly use these instructions, but I have not testet them:
https://forum.xda-developers.com/Mi...iaomi-mi-9-t3905825/post79924068#post79924068
In case you "soft-brick" it, use the MIUI Flash Tool: https://www.xiaomiflash.com/
But then you need to download and extract a rom that has a ".tgz" ending from here: http://en.miui.com/a-234.html
Let me know how it goes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I formatted the data partition. Also wiped delvic cache. And phone reboots into Mi-Recovery 3.0. What the heck?! No sign of TWRP left! Then I choose to reboot and it installs me new ROM. I am very puzzled with Xiaomi. Never been so hard before. Anyone can suggest? How to wipe and install clean ROM? I can install TWRP again but when the phone reboots it automatically overwrites and uses Mi-Recovery...

ChingghisKhan said:
I had the same pain in the butt
You are facing two issues:
1. You must have the correct TWRP
2. You must follow the correct steps
See my post here:
https://forum.xda-developers.com/Mi...iaomi-mi-9-t3905825/post79905261#post79905261
I am curently on RevolutionOS for MIUI.
I like it because it keeps the Fingerprint Reader and the AI Button working.
Also all the nice features of MIUI are retained but it adds more useful features.
Feel free to ask me for help if you have further trouble or if you run into problems with the GPS - I have a fix for that.
You can possibly use these instructions, but I have not testet them:
https://forum.xda-developers.com/Mi...iaomi-mi-9-t3905825/post79924068#post79924068
In case you "soft-brick" it, use the MIUI Flash Tool: https://www.xiaomiflash.com/
But then you need to download and extract a rom that has a ".tgz" ending from here: http://en.miui.com/a-234.html
Let me know how it goes
Click to expand...
Click to collapse
Okay, let me try. Come back to you.

ChingghisKhan said:
I had the same pain in the butt
You are facing two issues:
1. You must have the correct TWRP
2. You must follow the correct steps
See my post here:
https://forum.xda-developers.com/Mi...iaomi-mi-9-t3905825/post79905261#post79905261
I am curently on RevolutionOS for MIUI.
I like it because it keeps the Fingerprint Reader and the AI Button working.
Also all the nice features of MIUI are retained but it adds more useful features.
Feel free to ask me for help if you have further trouble or if you run into problems with the GPS - I have a fix for that.
You can possibly use these instructions, but I have not testet them:
https://forum.xda-developers.com/Mi...iaomi-mi-9-t3905825/post79924068#post79924068
In case you "soft-brick" it, use the MIUI Flash Tool: https://www.xiaomiflash.com/
But then you need to download and extract a rom that has a ".tgz" ending from here: http://en.miui.com/a-234.html
Let me know how it goes
Click to expand...
Click to collapse
Hi!
Thanks a lot for the advice. I reinstalled unoficial TWRP. Cleared cache and internal memeory. ANd flashed the system from the MIUI eu. So far it works.
Appreciate!

Lenovo Z5s Update to ZUI 11.5 (Android 10)

Disclaimer: No guarantees. Follow at your own risk. I am not responsible for bricked phones.
Credits to 4PDA
Prerequisites:
Knowledge of OEM unlocking from Developer options, adb, and fastboot
Knowledge of QPST in case you encounter bootloop, so you can revert to a reliable stock ROM
Unlocked bootloader (from here)
1) Get your bootloader unlocked, if you haven't already.
- Visit https://www.zui.com/iunlock
- Enter the IMEI1 (Second number when you call *#06# with the phone)
- Enter the Device ID from the Bootloader/Fastboot (Hold VOL- and Power, while device is off)
- Enter your email and captcha and set the checkmark to acknowledge voiding your warranty.
- If you get an error saying that your IMEI1 is wrong, put in a sim card and wait a few hours. If it still doesn't work, write an email to [email protected]
- In the developer settings in android, enable usb debugging and oem unlock.
- Flash the sn.img file you receive with fastboot (again, hold vol- and power while the device is off). Command is 'fastboot flash unlock sn.img'. You need compatible usb drivers, qualcom drivers and adb/fastboot to do that. Use google or write me a PM if you have trouble with that.
- execute 'fastboot oem unlock-go'
- This allows you to use fastboot to flash custom system/boot/vendor/vbmeta images
Click to expand...
Click to collapse
@wzsx150's recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img MEGA Google Drive
@wzsx150's TWRP for Android 10 TWRP-3.3.2B-0508-LENOVO_Z5S-10.0-CN-wzsx150-fastboot.7z (extract the IMG file and flash using fastboot)
3) Now you can flash TWRP.
- Download ...
- Flash it from the Bootloader with 'fastboot flash recovery recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img'
- Press VOL UP / VOL DOWN to navigate to recovery.
Click to expand...
Click to collapse
11.3.169: L78071_11.3.169_DEV_FullOTA.zip
11.5.096 Update: ZUI_11.3.169_DEV_TO_ZUI_11.5.096_ST.zip
11.5.111 Update: ZUI_11.5.096_TO_ZUI_11.5.111_ST.zip
Other files, use at your own risk
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Official TWRP for jd2019
In recovery, Format data, then wipe Dalvik/ART Cache, Cache, Data
Reboot to recovery
Install in order, without rebooting, 11.3.169 -> 11.5.096 Update -> 11.5.111 Update.
Install Magisk 20.4
Install TWRP for Android 10 (above) using fastboot if the update replaces stock recovery after rebooting
Edited out from original
Wipe Data and flash Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
In order not to encrypt Data in the future, install Official TWRP immediately after installing updates. Install > Install Image > twrp-3.3.1-0-jd2019.img
Install GApps
Note: I do not know if the 11.5 update relocks the bootloader. It doesn't lock the bootloader.
I had bootloop from OpenGApps. 4PDA post advises to use BiTGApps. You can install Google Play Store from the built-in Lenovo App Center and that's what I did.
Haven't tried disabling dm-verity and forceencrypt.

Good job, my man, I'll check it out tonight and prepare ourselves an updateable package for people coming from any rom to avoid the hassle of going through all of that. As soon as I get it working will release a new TWRP for Android 10.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

carlshark said:
View attachment 5036881
Click to expand...
Click to collapse
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier

jacoghi said:
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier
Click to expand...
Click to collapse
I've been using the phone on 11.5.111 for a couple of days now.
I flashed both the 3.3.2 TWRP of @wzsx150 and the official TWRP and they seem to be working. I didn't turn off encryption so it seems to work well.
Happy to have helped in a small way. Thank you for your hard work!

links not works

vesdan said:
links not works
Click to expand...
Click to collapse
Thanks for the heads up, apparently the original poster removed the links. Will be uploading the ones I used.
Reuploading done.

Thank you very much

Thanks for the rom my friend.
Can you please upload the latest update cause i am rooted and it cannot be installed via the system.
Also guys ,does anyone knows if i can put the latest android 10 with multilanguage rom ?Thank you for everything ,i appreciate.

thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number

sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?

galardo_2 said:
sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?
Click to expand...
Click to collapse
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!

vesdan said:
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!
Click to expand...
Click to collapse
but the qpst app need an aditional content.xml file, where can i get one

Install global via fastboot, all is included or in qfil ROM is all in zip file

vesdan said:
Install global via fastboot, all is included or in qfil ROM is all in zip file
Click to expand...
Click to collapse
I tried and failed again

i tired and failed again

galardo_2 said:
thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number
Click to expand...
Click to collapse
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably

carlshark said:
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably
Click to expand...
Click to collapse
after a few atempts (3-4 days) the imei number got accepted, but now i have another problem as you can see, i flashed the gapps and now i have the bootloop and i dont have a clue how to undone it

hello friends I have all the updates installed, but it tells me that there is a new one, where can I download it?
On the other hand, what difference is there between installing by twrp and qfill?

galardo_2 said:
i tired and failed again
Click to expand...
Click to collapse
This is problem with program, drivers sahara. Try fastboot