no i think i its time to help a bit because of
some people have issues with the cm recovery on cm12.1 roms
cm rec is not really good
some people want to use (flash) xposed or so
so here is my file (moded kernel ) for cm12.1 (also works on cr droid 02.08)
credits to
sony for the device z3tab comp lte because its the best 8inch tab
nut for the kernel repack and his xzdrec
cyanogen inc for the 06.08 nightly and the boot img
and the dev of ndr utills
Instrucktions
if you are on stock rom
1. flash cm or cr droid from dual recovery
2. flash gaaps
3.flash sgp621 kernel from attachments
4.boot to sytem
5. test to boot from system to recovery if it works all fine
6. if you see in step 5 the cm recovery boot device to fastboot
and unpack the twrp zip from attach and seleckt fastboot on flashtool then hotboot kernel or flash kernel select the twrp img and flash it now in twrp flash the attached cm kernel and reboot.
Anyone tried this yet?
Related
Hello there... i'm new on this device (SGS i9000). i updated my firmware to CM 10.1. I understand that when i update to JB, the rom updates my recovery to CWM 6. i am trying to change it to TWRP without success. My methods are 2:
1) i download a flasheable zip with the TWRP recovery. I flash it through CWM but when i reboot into recovery again, there is CWM, no TWRP.
pd: CWM didn't indicate me any error during the flash of the zip. it says that it were successful.
2) i flash the recovery image through flash_image using the terminal. it says that it was successfully wrote in the recovery partition.
i guess there's an script that reflash CWM recovery in every boot but i am not sure. If i'm correct (or not) what do i have to do to to flash TWRP permanently?
sorry for my bad english
Both Mackay and Latrop kernel have TWRP, and Devil Kernel has TWRP as an option.
Sent from my GT-P7510 using Tapatalk HD
We have two options mackay or devil to twrp
Im ZR user, not dev
New:
Omni 5.1_2015.03.30 (AOSP) port from @Olivier with kernel build from source testing
link: temp del for fix
Bug: Video not working ... and you tell me
How to flash:
- Download rom, gapps 5.1, superSU
- Flash rom first and reboot (for test rom working)
- When boot in rom, reboot to recovery and flash gapps and superSU
- Done
Notice: I tested it not much! Don't post your question in Z topic
Please thank to @Olivier for great work
OLD:
Lollipop AOSP 5.1.0 (Released 2015-03-13) for ZR port from @pabx testing
1. Download Lollipop_5_10_uncomment.zip rom from link below:
https://drive.google.com/file/d/0B-hTXkqVcs2WT1BhVjR1QWVmRDQ/view?usp=sharing
2. Extract Zip => Lollipop_5_01_uncomment Folder with 04 files:
- Lollipop_5_10_dogo.zip
- gapps-LP-signed.zip
- system.img
- update-supersu-v2.46.zip
3. Copy 03 zip files above into sdcard.
4. Reboot to recovery and wipe data, system, cache, dalvik cache (wipe all)
5. Turn off phone, flash system.img via fastboot (Beginning User can search xda about: How to flash system.img via flashtool)
Next: Flash kernel
use PC: extract boot.img from Lollipop_5_10_dogo.zip and flash it via flashtool (flash kernel)
6. Reboot phone to recovery, Flash Lollipop_5_10_dogo.zip
7. Reboot phone
8. When reboot phone complete, turn off phone and reboot to recovery
9. Flash gapps-LP-signed.zip
10. Flash update-supersu-v2.46.zip
11. Reboot. DONE
Bug known: :First reboot sim card not detect, reboot phone again for working
Big thanks: @pabx , @xenius9 , [B @Olivier[/B]
2nd mic works on this ROM? thx.
it stucks on boot animation...
@uncomment : Did u test it? How about battery and free ram?
Fix: Forgot flash kernel
CryptoRishabh said:
it stucks on boot animation...
Click to expand...
Click to collapse
Sorry, forgot edit script to flash boot.img
Fix:
extract boot.img from Lollipop_5_10_dogo.zip and flash it via flashtool (for kernel) then boot (updated OP)
will flashing via flashtool delete all internal memory?
nonono666 said:
will flashing via flashtool delete all internal memory?
Click to expand...
Click to collapse
no,
nonono666 said:
will flashing via flashtool delete all internal memory?
Click to expand...
Click to collapse
you have to delete system while using twrp recovery do a factory reset and then fastboot system.img using flashtool...
BUG??
before erasing everything I wanted to know what works:angel:
danielxg said:
before erasing everything I wanted to know what works:angel:
Click to expand...
Click to collapse
Bug: sometime sim card not detected, to fix: go to developer options and press restart baseband for working
ok thanks i try
I build kernel 3.4 from omni 5.1 source and ported omni 5.1 rom from @Olivier and tested it.
Link omni 5.1 for yuga: http://forum.xda-developers.com/xperia-z/orig-development/rom-omni-yuga-t3067440
Bug: video not working like yuga.
If anyone like it, I will upload it
nice
yes upload, is wonderful to see that the rom are still alive and matengono our ZR thx
Omni 5.1_2015.03.30 (AOSP) port for dogo testing with kernel build from source
danielxg said:
yes upload, is wonderful to see that the rom are still alive and matengono our ZR thx
Click to expand...
Click to collapse
Omni 5.1_2015.03.30 (AOSP) port from @Olivier with kernel build from source testing
link: temp delete for fix
Bug: Video not working ... and you tell me
How to flash:
- Download rom, gapps 5.1, superSU
- Flash rom first and reboot (for test rom working)
- When boot in rom, reboot to recovery and flash gapps and superSU
- Done
Notice: I tested it not much!
Please thank to @Olivier for great work
i wonder, can i flash cm12.1 kernel into 5.1 aosp?
rizqi_ir said:
i wonder, can i flash cm12.1 kernel into 5.1 aosp?
Click to expand...
Click to collapse
No!
Sent from my Xperia ZR using XDA Free mobile app
Hi
I have a GS3 i9305T. I can install and run any official rom without any problem up to 4.4.4. but when i install TWRP and then install any by any I mean every single custom rom on android 5.x.x it will just show the boot logo of CyanogenMod or nameless or any other one! nothing after that!
What i have tried is
Done factory reset before installing, Done after that, or didnt even do that.
installed rom with Gapps and without gapps
installed a fresh Stock rom and then installed the custom roms
tried couple of different Kernels as below
3 Jun 2015] [AGNi][CM] 03-06-2015 AGNi pureCM v4.4.5 I9305 (ULTRA SMOOTH)
[20 Apr 2015] [AOSP] [ArchiToolchain] [14/04/15] ArchiKernel V2.X
[21 Mar 2015] [CM12.0] Boeffla 3.0-alpha10 - 21.03.2015
[02 Feb 2015] HboKernel v0.3 - 02.02.2015 (NamelessRom 5.0)
I have done everything that i could so please as you know my problem is not the factory reset! please advise me what should i do?
did you install twrp 2.8.7.0? If yes, that one is faulty. Flash stock rom again, flash 2.8.5.0 and everything is working.
I have installed the rom using TWRP 3different version, Philz recovery, CWM none work!
you didn't answer my question though.
Hello shamid202,
please use this odin-flashable Recovery:
openrecovery-twrp-2.8.7.0-alpha17-i9305.tar
problem is data part format should be changed.
shamid202 said:
problem is data part format should be changed.
Click to expand...
Click to collapse
I have exactly the same problem, I try to flash SlimLP is booting but stuck on rom boot logo. I try to flash PAC rom same issue.
I use twrp 2.8.7.0 and openrecovery-twrp-2.8.7.0-alpha17-i9305.
@shamid202 do you have resolved the issue ?
Solved for me
After having problem with weird usb cable, I finally success to install SlimLP F2FS Rom with this procedure:
Flash TWRP VERSION 2.8.5.0 recovery with heimdall (or odin) heimdall --RECOVERY twrp2.8.5.0.img --no-reboot
Reboot in recovery mode
Flash from recovery Twrp openrecovery 2.8.7.0 alpha17 zip
Reboot in recovery mode
Go to Wipe/advanced and format /system /cache /data partitions to F2FS
Then finally flash SlimLP F2FS ROM zip
Twrp 2.8.7.0 work but I was unable to flash alpha17 after installing this version ...
Recovery Thread http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
Hi everybody! I wanted a better battery life for my Z1 (1 screen hour at 75% :crying: ) so i flashed the CM11 latest snapshot, (as we all know, the LP builds has a very horrible battery management) and it worked, but when i switched from MX ROM to CM11 i lost my recovery (dual recovery) and it were replaced with CWM, i tried to install TWRP with some apps like Rashr, Flashify, ROM manager, Multirom manager and many others but it wasnt successful, and now im trying to flash a stock build of LP but flashtool gives to me this error:
- root this bundle is not valid -
I tried with a KK build but it was the same result. So I am stuck in CM, i dont know what more can i do... Can anyone help me?
The Bankshooter said:
Hi everybody! I wanted a better battery life for my Z1 (1 screen hour at 75% :crying: ) so i flashed the CM11 latest snapshot, (as we all know, the LP builds has a very horrible battery management) and it worked, but when i switched from MX ROM to CM11 i lost my recovery (dual recovery) and it were replaced with CWM, i tried to install TWRP with some apps like Rashr, Flashify, ROM manager, Multirom manager and many others but it wasnt successful, and now im trying to flash a stock build of LP but flashtool gives to me this error:
- root this bundle is not valid -
I tried with a KK build but it was the same result. So I am stuck in CM, i dont know what more can i do... Can anyone help me?
Click to expand...
Click to collapse
KK custom roms have recovery inside kernel. You have recovery in your FOTA or Recovery partition. The in-kernel recovery won't let you start Fota recovery, no matter what you try to install. Latest LP roms, as well as MM don't have recovery in kernel. So, you want to fastboot an LP kernel that has no recovery: fastboot flash boot boot.img. Then fastboot TWRP: fastboot flash recovery recovery.img. After that, you can boot into TWRP recovery and install whatever you want...
optimumpro said:
KK custom roms have recovery inside kernel. You have recovery in your FOTA or Recovery partition. The in-kernel recovery won't let you start Fota recovery, no matter what you try to install. Latest LP roms, as well as MM don't have recovery in kernel. So, you want to fastboot an LP kernel that has no recovery: fastboot flash boot boot.img. Then fastboot TWRP: fastboot flash recovery recovery.img. After that, you can boot into TWRP recovery and install whatever you want...
Click to expand...
Click to collapse
Thanks a lot! Ill try it
Nwver had problem like that, but I canno manage it on my own.
What I have:
rooted E1 Single (e2005),
kernel with Philx Touch,
zip with FalconSS Revamp R2,
zips with TWRP 2 and TWRP 3.
What I do:
Flash kernel with Philz.
Copy zips to E1.
Boot to Philz.
Flash FalconSS.
Flash either of TWRPs.
WIpe Cache and Dalvik.
Bootloop on Sony logo.
Should I use normal Falcon? (will try it in a moment)
Or maybe other stock firmware? (have 20.1.A.2.19)
All I want is working TWRP with support for Nougat.
Ok. Normal Falcon was what I needed. Now LOS14.1 is booting