As the title says, it would be nice to have a clicky pen
itrof61 said:
As the title says, it would be nice to have a clicky pen
Click to expand...
Click to collapse
I wanna know to lol
Even it works I think it wont fit in note 4
Yes it works, yes it fits (loosely), yes it clicks, yes I tried it.
rosedog said:
Yes it works, yes it fits (loosely), yes it clicks, yes I tried it.
Click to expand...
Click to collapse
Loosely like it falls out?
Squilchi said:
Loosely like it falls out?
Click to expand...
Click to collapse
Like it's in there but there is some play and I would not trust it to hold.
rosedog said:
Like it's in there but there is some play and I would not trust it to hold.
Click to expand...
Click to collapse
I want the click. Thanks for the info
Squilchi said:
I want the click. Thanks for the info
Click to expand...
Click to collapse
Hi, you can apply a little bit of clear plastic tape and then it will fit tightly and the click works too Plus the build quality and precision of the note 5 spen is supurb :good:
What's happens when you put it into the note 4 backwards?
Related
Take a look
youtube.com/watch?v=8UzrmEL-whw
Click to expand...
Click to collapse
Seen this looks nice |Looks like it doesn't have a flimsy back either
Seen this looks nice |Looks like it doesn't have a flimsy back either
Click to expand...
Click to collapse
Why would Giorgio sell it with a flimsy back....
Wow...
Next up, Louis Vuitton Nexus S!
I would really like to buy one of those backplates to replace my Captivate backplate....
JPS81 said:
I would really like to buy one of those backplates to replace my Captivate backplate....
Click to expand...
Click to collapse
whats that bad about urs ?
souljaboy said:
whats that bad about urs ?
Click to expand...
Click to collapse
Plastic... I think
Any one try it?
especially hard case
Afaik they're identical..
I've owned a Seidio Case for IS and yes they are identical.
LoGaY said:
Any one try it?
especially hard case
Click to expand...
Click to collapse
The Inc2 BodyGlove case is a great fit on my IncS.
yes you can
darkidz555 said:
yes you can
Click to expand...
Click to collapse
Yes we can!
Yes you can
Like everyone said, the answer is yes. My brother ordered a Droid 2 case and it works great with his S.
Hi Friends
Can anyone suggest a good bumper for Xperia Z. I could not any good one anywhere. Have seen my mate with the official Roxfit one which is very bulky and reduces the look of the beautiful phone.
Any suggestions please?
Thanx
http://www.ebay.com/itm/Aluminum-Al...se-for-Sony-Xperia-Z-L36h-Black-/221206945309
I bought this one and I'm very happy with it
FSN Can you please post some photo with this bumper ? want to buy also but i want to see how big will be phone in hand with this. Thank you
FSN said:
http://www.ebay.com/itm/Aluminum-Al...se-for-Sony-Xperia-Z-L36h-Black-/221206945309
I bought this one and I'm very happy with it
Click to expand...
Click to collapse
Hi, thanks. Can you tell me how long did it take to arrive? I am in UK
X-doria bump and updated poetic borderline are otw.. Will post reviews then onwards
Go either for X-Doria or MetalSlim I prefer X-Doria though,MetalSlim is bulky(more protective though)
EDIT 1: (Uploading pictures)
EDIT 2 : https://www.dropbox.com/sh/yqau4lz2s2fgm92/89jQC5OOnL (Sorry if its posted at dropbox)
Enjoy,Hope you can pick the right one
Hmm, mby will buy it too, thank you
FSN said:
I bought this one and I'm very happy with it
Click to expand...
Click to collapse
I have that one and it's beautiful compared to non aluminum bumpers but less comfortable due to being bulky and very hard
Won't it scratch the phone? Especially the plastics on the phone?
X-doria bumper on my white XZ
Sent from my GT-N8000 using Tapatalk 2
arkaz99 said:
FSN Can you please post some photo with this bumper ? want to buy also but i want to see how big will be phone in hand with this. Thank you
Click to expand...
Click to collapse
I'm sorry, was not online for some days For pictures, I think you can refer to the pictures from
kist32 said:
http://dx-box.com/aluminium-alloy-hard-faceplate-bumper-for-sony-xperia-z-l36h-l36i.html
Click to expand...
Click to collapse
what's also to say is:
heythem said:
I have that one and it's beautiful compared to non aluminum bumpers but less comfortable due to being bulky and very hard
Click to expand...
Click to collapse
but "less comfortable" doesn't mean "not comfortable"
ram11 said:
Hi, thanks. Can you tell me how long did it take to arrive? I am in UK
Click to expand...
Click to collapse
It took something like 5-6 working days, after the payment was accepted. (to Switzerland)
nazrin313 said:
Won't it scratch the phone? Especially the plastics on the phone?
Click to expand...
Click to collapse
There's some kind of rubber on the inside, which holds the phone tight and prevents it from scratching. Until now everything looks still fine. (for the rubber, refer to the pictures on the post from kist32, quoted above.
Why would it? It's supposed to fit like a glove, so it wouldn't be able to achieve any kind of friction.
Tom Fagerland said:
Why would it? It's supposed to fit like a glove, so it wouldn't be able to achieve any kind of friction.
Click to expand...
Click to collapse
Well my friend, metal n plastic doesnt go to well especially when u take it out n in all the time. But i didnt realise that the bumper had rubber so its all good
thx 4 links
I chose this one as with the screen protector front and back both antishatter sheets are protected, however the back generally gets abused from general use. This one has a semi flexible acrylic back panel which is clear
http://www.mobilefun.co.uk/sony-xperia-z-sma4127b-gel-shell-case-black-p38573.htm
Sent from my C6603 using Tapatalk 2
Excellent kickstand mechanism, very slippery but retains the exact ergonomics as the devices original design.
Does the kickstand on this case use a magnet to keep it closed? I read somewhere the the magnet will have an adverse affect on the signal.
Chuckd610 said:
Does the kickstand on this case use a magnet to keep it closed? I read somewhere the the magnet will have an adverse affect on the signal.
Click to expand...
Click to collapse
I heard that too but this is a second revision. That and the spen issue have been resolved. Everything is perfect
This ACTUALLY looks legit. Where did you pick this up at?
FormeriPhoney said:
Excellent kickstand mechanism, very slippery but retains the exact ergonomics as the devices original design.
Click to expand...
Click to collapse
Chuckd610 said:
Does the kickstand on this case use a magnet to keep it closed? I read somewhere the the magnet will have an adverse affect on the signal.
Click to expand...
Click to collapse
FormeriPhoney said:
I heard that too but this is a second revision. That and the spen issue have been resolved. Everything is perfect
Click to expand...
Click to collapse
sebastianraven said:
This ACTUALLY looks legit. Where did you pick this up at?
Click to expand...
Click to collapse
I have two colors for this case from reviewing it. I love this case however I find the buttons are very stiff and hard to press. Anyone else have this experience?
Iskateforfree said:
I have two colors for this case from reviewing it. I love this case however I find the buttons are very stiff and hard to press. Anyone else have this experience?
Click to expand...
Click to collapse
That's weird bc I think these are one of the best button feedback of any case I have.. Besides the UAG
sebastianraven said:
This ACTUALLY looks legit. Where did you pick this up at?
Click to expand...
Click to collapse
Amazon
FormeriPhoney said:
That's weird bc I think these are one of the best button feedback of any case I have.. Besides the UAG
Click to expand...
Click to collapse
Really? Wow. I must have installed it incorrectly or something. I'll double check it again in a few minutes and report back.
Iskateforfree said:
Really? Wow. I must have installed it incorrectly or something. I'll double check it again in a few minutes and report back.
Click to expand...
Click to collapse
No joke. This thing is a pain in the ass to get on right. You have to make sure the inner trim is in the volume and power key then put the power side in first, then press the bottom in hard. Ridiculous lol
FormeriPhoney said:
No joke. This thing is a pain in the ass to get on right. You have to make sure the inner trim is in the volume and power key then put the power side in first, then press the bottom in hard. Ridiculous lol
Click to expand...
Click to collapse
Just installed the case like you described. The buttons feel a little bit better but I wonder if these are the types of buttons that need a "break in" period. I know cases have that and the buttons feel a lot better after some time.
How slippery?
Sent from my SM-N920T using Tapatalk
The bottom near the charging port is messed up...
Sent from my SM-N920P using Tapatalk
A nice case. I like the clear case look to it and mos def cool kick stand. I as well as the a few comments above, would like to know how slippery is the case in hand?
david_b01 said:
The bottom near the charging port is messed up...
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
I didn't push it down all the way.. It's flush now
tw1n5nak35 said:
A nice case. I like the clear case look to it and mos def cool kick stand. I as well as the a few comments above, would like to know how slippery is the case in hand?
Click to expand...
Click to collapse
If you think the device is slippery naked then yes. The bottom and lip are you so that helps
FormeriPhoney said:
If you think the device is slippery naked then yes. The bottom and lip are you so that helps
Click to expand...
Click to collapse
That helps alot in making my descion for a case. I work with diesel engines on the regular and cant do slippery.
So, my new satin finish Razer Phone 2 is on the way to me from China.
For dev purposes, should I consider this phone an exact match for the current unlocked RP2?
I wonder if it will have a slightly different model number in the settings...
It should be the exact same specs
blackknightavalon said:
It should be the exact same specs
Click to expand...
Click to collapse
Confirmed.
Satin RP2 on build number P-MR1-RC003-RZR-190305.3110
gboybama said:
Confirmed.
Satin RP2 on build number P-MR1-RC003-RZR-190305.3110
Click to expand...
Click to collapse
Have any pics of the satin? I've not seen a hands on for it yet.
Rox598 said:
Have any pics of the satin? I've not seen a hands on for it yet.
Click to expand...
Click to collapse
I mean, it doesn't show much, but see attached.
The satin is exactly what I was hoping for. Seems just about impervious to fingerprints.
gboybama said:
I mean, it doesn't show much, but see attached.
The satin is exactly what I was hoping for. Seems just about impervious to fingerprints.
Click to expand...
Click to collapse
But not to the Spigen case marks XD
Thanks for the picture!
Rox598 said:
But not to the Spigen case marks XD
Thanks for the picture!
Click to expand...
Click to collapse
Good eye and you are correct! :good: