Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This ROM is an unofficial build on CyanogenMod 12.1. Originaly (back in November 2014), the project was only about the kernel but I thought that a full ROM might a better.
So, why would you install this ROM ?
The main reason would be to upgrade significantly the kernel :
- get rid of the old LNX.LA.3.5.1 kernel base (from February 2014) and switch to a brand new LA.BF lollipop base
- to get a smoother experience of CyanogenMod
- to enjoy some CAF taste in all of his glory
- if you are an enthusiast
This ROM uses custom HALs so I'm not responsable of incompatibility with eventual custom kernels and I won't "Add support"
ROM Features :
- Based off latest generic CyanogenMod 12.1 nightly source
- OTA updates via built-in CMUpdater (LZMA Compressed)
- Vanilla CAF LA.BF.1.1.1.c5 display HAL (improved display performance)
- Vanilla CAF LA.BF.1.1.1.c5 media HAL (improved video performance)
- Vanilla CAF LA.BF.1.1.1.c5 audio HAL (improved audio performance)
- Latest Motorola LPB23.13-37 5.1 Vendor Files
- Latest kernel.org f2fs binaries
- Vanilla CAF LA.BF.1.1.1.c5 Media Codecs / Audio Policy / Bluetooth configs
- LZMA Compressed recovery images
- QCOM Bionic Optimizations
Kernel Features :
- Based off latest CAF LA.BF.1.1.1.c5 kernel source from Qualcomm
- As clean as possible, it matches CAF
- Vanilla CAF LA.BF.1.1.1.c5 Wi-Fi Prima driver (better wifi performance)
- Uses ZEN i/O Scheluder by default
- First Lollipop Overclock
- Underclocking
- Smartmax Governor
- My own akm8963 driver re-work for LPM/HBM mode
- The best is in comming
But, why is it in alpha ?:
It's in alpha state because not many people tested it and maybe there are some unknown bugs.
Speaking of bugs here they are :
Code:
[B]Known bugs[/B]
- 5 sec blackscreen at boot (doesn't affect bootime) [B][COLOR="red"][/COLOR]the first boot blackscreen is even longer so just wait and it will boot, builds or tested do not worry[/B]
- Offline charge is broken (same reason as blacksreen)
I released even if those bugs because they doesn't break the ROM experience itself (and because I wait for realeasing this ROM since ages)
They will, of course, fixed as soon as possible.
Download :
cm-12.1-20150909-UNOFFICIAL-h2o64-falcon.zip - 206.7 mo (AFH Mirror) #CHANGELOG
Old Downloads :
cm-12.1-20150827-UNOFFICIAL-h2o64-falcon.zip (AFH Mirror)
How to install ?
If you are coming from an official CM12.1 Nightlies you should dirty flash (flash my ZIP on top of your existing rom without too much issues). If you encounter any issues (report and) do the method detailled bellow.
1) Place ROM & Gapps in your virtual SD
2) Reboot in Bootloader Mode
3) Go to "Recovery" (Vol -) and confirm (Vol +)
4) Wipe Data/Factory Reset
5) Wipe Dalvik cache
6) Install the ROM zip
7) Install the Gapps zip
8) Install SuperSU zip
9) Reboot
Sources :
All repositories are on the cm-12.1-caf branch
device/motorola/falcon : https://github.com/h2o64/android_device_motorola_falcon
kernel/motorola/msm8226 : https://github.com/h2o64/kernel_msm
manifest and build instructions : https://github.com/h2o64/android_local_h2o64
Credits :
- CyanogenMod and its contributors
- CAF (aka Qualcomm)
- Motorola
XDA:DevDB Information
Unofficial Cyanogenmod 12.1 with CAF Kernel 3.4.0, ROM for the Moto G
Contributors
h2o64
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Alpha
Current Beta Version: 2015-09-09
Beta Release Date: 2015-09-09
Created 2015-08-27
Last Updated 2015-09-11
Changelogs
New build 20150616
Code:
- Initial release
Download :
cm-12.1-20150827-UNOFFICIAL-h2o64-falcon.zip (AFH Mirror)
Click to expand...
Click to collapse
@h2o64 Good work!
Flashhhh said:
@h2o64 Good work!
Click to expand...
Click to collapse
1000 posts YAY !
I'm not a fan of CM but my brain forces me to try this...
Can't try this ROM right now since I use my moto g as my daily driver but good to see some nice development going on!
pfufle said:
Can't try this ROM right now since I use my moto g as my daily driver but good to see some nice development going on!
Click to expand...
Click to collapse
It's fully stable, you just don't see 5 sec from the bootanimation.
I will install it and try it but I need to charge my Moto G Good job !!!
Damn, bootanimation doesnt show at all, i reflashed three times thinking something was wrong, and i lost patience thinking my phone turned off after google logo, but it booted. It works great btw, stable and all, and overall fast. Nice work. Now just remove the stupid cm theme engine and implement layers, and you have most custom unoffical cyanogenmod rom.
DeHuMaNiZeD said:
Damn, bootanimation doesnt show at all, i reflashed three times thinking something was wrong, and i lost patience thinking my phone turned off after google logo, but it booted. It works great btw, stable and all, and overall fast. Nice work. Now just remove the stupid cm theme engine and implement layers, and you have most custom unoffical cyanogenmod rom.
Click to expand...
Click to collapse
Yeah, the bootanimation bug is annoying, but you'll see that you get just a 5 sec blackscreen on reboots. It was just the first boot xD
Hmmm ... I don't think I will remove the CM Theme Engine : as I said, this project wasn't a ROM originally (I made a ROM to avoid HAL issues actually) I just wanted to make big background optimizations. So on the apparence/look part, I won't differ from CM.
My opinion (is still black screen after flashing). Just make optimizations and don't change the features or other things. To be just an optimized CM 12.1 ROM.
h2o64 said:
Yeah, the bootanimation bug is annoying, but you'll see that you get just a 5 sec blackscreen on reboots. It was just the first boot xD
Hmmm ... I don't think I will remove the CM Theme Engine : as I said, this project wasn't a ROM originally (I made a ROM to avoid HAL issues actually) I just wanted to make big background optimizations. So on the apparence/look part, I won't differ from CM.
Click to expand...
Click to collapse
Too bad, well i guess i'll stay with the stock theme then, because i seek for stability, and that's pretty rare nowadays.
---------- Post added at 12:27 PM ---------- Previous post was at 12:25 PM ----------
And we can expect updates on this project? I'm not asking for ETA, i just want to be shure this is not a one time thing
omg, thanks for this @h2o64.. gonna try it out...
Eurofighter_ty said:
My opinion (is still black screen after flashing). Just make optimizations and don't change the features or other things. To be just an optimized CM 12.1 ROM.
Click to expand...
Click to collapse
This 5 sec black screen will stay until I fixed SOL in MDSS.
DeHuMaNiZeD said:
Too bad, well i guess i'll stay with the stock theme then, because i seek for stability, and that's pretty rare nowadays.
And we can expect updates on this project? I'm not asking for ETA, i just want to be shure this is not a one time thing
Click to expand...
Click to collapse
All my working projects (AOSParadox, TWRP, or CM now) are getting continuous work and updates. I just don't like to post "empty" updates with an un-interessting changelog.
I just made the first stage of this project xD So much is about to come
Thanks for supporting
forgot to ask, if compile the kernel and use to latest nigtlies. it will be okay? @h2o64
hurtsky said:
forgot to ask, if compile the kernel and use to latest nigtlies. it will be okay? @h2o64
Click to expand...
Click to collapse
Sure
Oops
Forgot to add a kernel feature in the list
- My own akm8963 driver re-work for LPM/HBM mode
Click to expand...
Click to collapse
h2o64 said:
Forgot to add a kernel feature in the list
- My own akm8963 driver re-work for LPM/HBM mode
Click to expand...
Click to collapse
Dual sim working ? I mean this is cm so hopefully it is working .. But when I flashed it , it stays on black screen..... For almost 2 min
sachoosaini said:
Dual sim working ? I mean this is cm so hopefully it is working .. But when I flashed it , it stays on black screen..... For almost 2 min
Click to expand...
Click to collapse
Yes it should be supported
It's normal don't worry
Hi,
I installed all my apps about 30 apps and every app work without problems fc or other problems except one: Zonga - it's a music streaming app developed by Vodafone Romania and in other ROMs it's working but here it doesn't have sound and If I press play doesn't play from first I need to skip the track and the next one plays without music.
I will attach soon a logcat.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0.4 (ICS), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
BroadcomCM is based on the CyanogenMod Project. Our goal is to create ROMs based on CyanogenMod Sources for Broadcom BC21553 devices. All the source code for CyanogenMod is available in the broadcomCM Github repo. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATION
Click to expand...
Click to collapse
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 9.1 to your Galaxy Ace i, or coming from another ROM:
Iinstall ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)
Install the ROM from sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Upgrading/Downgrading from CM7/CM11?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)
Install the ROM from sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Upgrading from another build of CM9?
Do a Nandroid Backup!
Wipe always recommended but Optional.
Install the ROM from sdcard using ClockworkMod Recovery
DOWNLOADS
Click to expand...
Click to collapse
CyanogenMod 9.1 Downloads:
Current version:
Beta 5: http://www.mediafire.com/download/mdb16m1hgis6673/CM9_cooperve_Beta_05.zip
Old versions:
Beta 4: http://www.mediafire.com/download/sddn22iykpr3zzr/CM9_cooperve_Beta_04.zip
Beta 3: http://www.mediafire.com/download/2jbr4v2r3nmb1mh/CM9_cooperve_Beta_03.zip
Beta 2: http://www.mediafire.com/download/waltu1p2p5q5ut5/CM9_cooperve_Beta_02.zip
Beta 1: http://www.mediafire.com/download/701npw54ryzooi5/CM9_cooperve_Beta_01.zip
Alpha 1: http://www.mediafire.com/download/gtn8y9rzz78blys/CM9_cooperve_alpha_01.zip
Google Apps:
http://www.androidfilehost.com/?fid=23501681358561026
ClockworkMod Recovery:
Version 6.0.1.2: http://forum.xda-developers.com/gal.../cwm-clockworkmod-6-0-1-2-broadcomcm-t2805391
Version 5.0.2.8: http://forum.xda-developers.com/showthread.php?t=2649487
CHANGELOG
Click to expand...
Click to collapse
BETA 5:
Re-newed device tree from scratch
Optimized libgralloc and libhwcomposer
Fixed laggy bootanimation
Completly removed artifacts on screen due to bad HW drivers
Finally improved and fixed whole HW system
Imporved Nexus S audio libs
Fixed microphone
New liblight lib open source - future support of BLN
New camera library based on QCOM msm7x27 devices
Camera preview working
Camera pictures working too on native camera app
Added all propietary necessary camera libs
Panorama mode also working
New binary for get_macaddrs and patched libbrcm_ril.so
New WIFI configurations
FIxed WIFI signal bars
Fixed GPS, need more tests
Stop using old Bluetooth system, and swithced to CM9
Renewed and swithced to AOSP open offline charging
Vold now built from source, and faster media scanning
Fix battery capacity of some devices, and imrporved battery stats
Init and adb binaried built from source
Fixed whole adb system (adb shell, su)
Force adb to work on the first boot without debug options
CWM6 built from ICS source and integrated on kernel build
New kernel worked from 0 for all three devices
New ramdisk full compatible with CM9 and built from source
Common kernel is present on this build
Switched to Alcatel libv3d kernel drivers
Adapted cooperve camera drivers to common kernel
New recovery.fstab partitiont table
BETA 4:
Fixed RIL (2G and 3G/H+ working)
Fixed SMS / MMS sending and recieving
Added libbrcm_ril from CM7 device tree
IMEI fixed too
Added back libasound (deprecated on ICS) but called by RIL
Removed wrong configs for RIL on BoardConfig
New RIL build.prop tweak that was deprecated
Clean up overlay on device tree
Fixed more layout issues on LDPI overlay (tassve and totoro)
Fixed Orange weird animations on LDPI devices
Sensors fixed for Tassve
Fixed PRDOUCT_NAME on Tassve
Fixed battery stats (linear bar)
Fixed 1% battery bug (some users expierencing it, like me)
BETA 3:
Improved HW drivers implementation
Fixed Audio coming through speakers
New audio libs built from source (legacy ALSA - Nexus S)
Fixed USB Mass Storage (USB connected through PC)
Fixed torch (Cooperve) deleting dependency with Camera libs
Fixed Sensors adding memsicd to build and new Sensor libs
Fixed accelerometer (rotation screen, smooth effect)
Fixed proximity sensor (on calling)
First support of open-sourced liblights (future BLN support - not included)
First work done on fixing battery stats (Settings -> Battery, not working atm)
Fixed LDPI (tassve, totoro) values for trebuchet and framework
Added back small and simple file Manager (requested)
Deleted double de-fines on build.prop
New property overrides took from CM9 of msm7x27 devices (untested)
Improved stability of CM9 on BCM devices
Update-script like CM9 official (removing Kernel install)
Improved device tree
BETA 2:
Fully HW fixed thanks to Broadcom Drivers
Gralloc, HGL, hwcomposer built from source
FIxed Media Scanner due to HGL working
CRT animation, rotation... (all animations) working smooth
Fixed rotation animation
Reduced a lot of booting time with 4.0 Kernel
Updated overlay
As always, cleanup in device tree
BETA 1:
Fixed Bluetooth on CM9
FIxed Keyboard layout
Fixed RIL - Unusable due to no audio and really usntable
Fixed all FC's with phone app
Fixed all MDPI issues about layout
Fixed WIFI (bars not showing)
Fixed offline Charging
Fixed Bootanimation
Fixed Media Scanner (not 100% - not proper EGL)
Improved stabilty
Fixed colors ons swipe menus (up and down)
Completly new device tree on BroadcomCM
Faster than alpha 1 - it runs on EXT4!
Build compatible with CM7 SPecific Basic kernel 3.0 (it will have a CM9 kernel when many bugs fixed)
ALPHA 1:
Initial build, based on Galaxy Y ICS sources.
Build it from source, NOT PORTED
Phone deleted because it crashes the system
BUGLIST
Click to expand...
Click to collapse
Audio routing (Front Speaker and headphones not working)
Video Recording
Encoders (Hantro) - this mostly will never be fixed
Tethering
Flashlight
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
The broadcomCM team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 9.1 - BroadcomCM, ROM for the Samsung Galaxy Ace S5830
Contributors
bieltv.3, Alberto96, Psyke83, Spacecaker, Lopicl.00
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 5
Beta Release Date: 2014-07-14
Created 2014-07-14
Last Updated 2014-07-14
How to logcat:
Make sure you have ADB installed
Open CMD (Windows) or terminal (Linux) http://developer.android.com/sdk/index.html & http://developer.android.com/tools/help/adb.html
Type:
Code:
adb devices
Then type:
Code:
adb logcat -v long > logcat.txt
Then the file logcat.txt will be saved on the directory you're doing the commands
Paste it on pastebin.com and post it, we will thank you
Petition to release the drivers to Broadcom
I've made a video to show what will happen if we got the drivers comparing to s5830 which have the drivers of it.
Please all of you sign the petition to release it! https://www.change.org/petitions/br...u-kernel-etc-for-samsung-galaxy-ace-gt-s5830i
last one
Amazing Work Biel and the team If Only There Was A Way Which I Could Dontate To You But Keep Up The Amazing Work
Good Start TO ICS
Re: [ROM][DEV][UNOFFICIAL] CyanogenMod 9.1 - BroadcomCM [Alpha 1 - 26/01/2013]
Story:
As most of you all might know.
In the last month Broadcom was very kind to us and released the HW drivers for our devices ( BCM21553 )
These sources where based upon android 4.0.1 and thus not working on 4.0.4.
We as Team BroadcomCM (SpaceCaker and Bieltv.3) have been working from the release date till now to make these compatible with 4.0.4 ICS and tested these to make sure all edits where right.
During this we worked almost 24/7 to get it proper.
As first result we had it working on AOSP ICS 4.0.4 ( SpaceCaker Build ) But sadly on this we didn't had touchscreen working and Colors not proper.
Later we build on CM9 (Bieltv.3 build) and found out that colors as in previous build weren't proper.
After tons of work and such we found out that our problem was laying in something very simple, something we overlooked during the editing process. After Biel tried the fix it suddenly worked like it should and from then with our latest Team edits we managed to get the HW drivers ported the proper way.
Thanks to our amazing team we have got HW to work proper now.
Also A lot of thanks to Broadcom for releasing the initial drivers.
wow crazy man thankssss reserved
wah.
Finally sources released
Sweet ^^ like candy biel do you add setupwizard for cm9?
Thanks Biel!
Thanks Biel! been waiting for it for about a year!
Cyanogenmod, It's becoming Reality Gonna share this!
you r great man just love ur work
Re: [ROM][DEV][UNOFFICIAL] CyanogenMod 9.1 - BroadcomCM [Alpha 1 - 26/01/2013]
I knew itt !! I knew that ur surprise was CM9 .. As alucard discovered CM9 from galaxy y and as it worked without port you started work as it was possible to create a CM9 rom even if it is based on sources
Sent from my GT-S5830i using xda premium
Waho ICS coming Excellent job guys
R: [ROM][DEV][UNOFFICIAL] CyanogenMod 9.1 - BroadcomCM [Alpha 1 - 26/01/2013]
Why start a thread for CM9.1 when CM7.2 isn't finished? So now you have to control and develop for two different Android Version...
BTW keep up the AWESOME work!
Inviato dal mio Nexus 7 4.2.1
Quad-core POWER
Yesssssss ! The cm9.1 is coming for us ! We love ur work ! :d i just love it !
Is the hardware acceleration lib included already?
Also whitexp says that it's impossible to get audio working...
Biel, ur much faster than our thoughts :good::good:
thanks bro.. will test soon
Re: [ROM][DEV][UNOFFICIAL] CyanogenMod 9.1 - BroadcomCM [Alpha 1 - 26/01/2013]
Qeemi said:
Why start a thread for CM9.1 when CM7.2 isn't finished? So now you have to control and develop for two different Android Version...
BTW keep up the AWESOME work!
Inviato dal mio Nexus 7 4.2.1
Quad-core POWER
Click to expand...
Click to collapse
Thats because this way we could get morevhelp maybe ?
Sent from my ST25i using xda app-developers app
Re: [ROM][DEV][UNOFFICIAL] CyanogenMod 9.1 - BroadcomCM [Alpha 1 - 26/01/2013]
Wow..Awesome work.Hope you can find ways to solve some major bugs.Will test when I get time
GT S5830i-Rocking on Broadcoms gpu...
Official Omnirom for Sony Xperia V
OmniROM is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance, reliability and features over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
OmniROM is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
All the source code for OmniROM is available in the OmniROM Github repo.
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our intructions word by word
- are unfriendly
Even if you tell us that your problem is not related to your custom kernel /mod / magic => WE DON'T CARE!
Your mod => your problem!
Official OmniROM Wiki:
http://docs.omnirom.org
First time installing OmniROM to your Xperia V, or coming from another ROM:
- Read known issues and FAQs
- Copy GApps and OmniROM ZIPs to your SDCard
- Unlock Bootloader
- Flash boot.img with fastboot "fastboot flash boot boot.img"
- Boot into Recovery (push volume down on boot if you can see sony logo)
- Flash OmniROM zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of OmniROM:
- Copy the OmniROM ZIP to your SDCard
- Boot into Recovery
- Flash the OmniROM zip from SDCard
- Reboot
Issues:
- some users reported bluetooth pairing problem.
- offline charging no animation
- Miracast not working with unlocked bootloader
Changelog Omnirom:
Kernel source: omnirom - msm8960
Device tree: Link
Vendor files: Link
Download: http://dl.omnirom.org/tsubasa/
Gapps by BaNkS: Thread
Supersu by chainfire: Download and Thread
Big Thanks to tilal6991 and DooMLoRD
XDA:DevDB Information
Omnirom - Xperia V, ROM for the Sony Xperia V
Contributors
walter79
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: JB Sony 9.2.A.1.210
Version Information
Status: Stable
Created 2014-04-22
Last Updated 2014-06-22
Reserved
!!!
There is a bug in google play service that cause battery drain because phone can not enter deep sleep.
Workaround. clear data of this service after every reboot or disable wakelock
!!!!¡!
changelog official build:
2014-XX-XX - Changelog
2014-04-08 - first official nightly build
2014-04-30 - fix boot recovery
2014-04-28 - first build with "everything" work
2014-04-22 - initial build
Homebuilds:
!!!! Please switch to ondemand cpu gov with this build. Less battery drain. !!!
kernel source: click
Whats new in homebuilds ?
Re-added cpu hotplug and switch to ondemand cpu gov.
Rom is odexed (user build)
Download: /mobile phone/Xperia V/omnirom/4.4 or /Kitkat
omni-4.4.3-20140613-tsubasa-HOMEMADE.zip
Mirror 1 (Dev-Host)
Mirror 2 (MS-onedrive)
Next homebuild:
- CPU: intelli_plug with eco mod
Reserved
Current bugs:
- bluetooth pairing problems
- no charging animation if phone is powerd off
Old bugs:
- Wifi not working - fixed 28.04.2014
- gps not working - fixed 28.04.2014
- both Camera not working - fixed 28.04.2014
- screen did not switch off after push power button. - fixed 28.04.2014
- LED (RGB) not working - fixed 28.04.2014
- TWRP recovery works only via boot to recovery or adb "reboot recovery" fixed 30.04.2014
U R THE Man!
Here is a download link that worked for me:
http://d-h.st/users/walter79/?fld_id=35528#files
Sent from my Xperia V using Tapatalk
Hell Yeesssss
Thank you very very much. Gonna try it soon and I'll report
Been waiting forever for an omni rom port. Dling atm. Gonna test battery life and reboot frequency.
Sent from my GT-N7105 using Tapatalk
A question Herr Walter:
Any chance that the kernel would work on other ROM, such as AOKP?
And, if yes, can this be made into a flashable zip?
Thank you for your input.
Sent from my Xperia V using Tapatalk
Good to see this finally coming to the V. And no the kernel is not separable from the ROM so the kernel cannot be flashed onto another KK ROM.
As for reboots, there should be none - as with the T the new kernel should fix all instability issues.
Sent from my Xperia T using Tapatalk
vrl13 said:
A question Herr Walter:
Any chance that the kernel would work on other ROM, such as AOKP?
And, if yes, can this be made into a flashable zip?
Thank you for your input.
Sent from my Xperia V using Tapatalk
Click to expand...
Click to collapse
Kernel source can work for all roms but you need to update a lot of proporitary files.
walter79 said:
Kernel source can work for all roms but you need to update a lot of proporitary files.
Click to expand...
Click to collapse
Any chances you could provide a flashable zip that includes the kernel and those proprietary files you mentioned?
I'd be willing to give this a shot.
Sent from my Xperia V using Tapatalk.
Tested this for a couple of hours.
Except the wifi/gps/camera bugs everything else seems to work fine with ART on.
The Omni switch is a really nice feature
Sent from my Xperia V using Tapatalk
WhiteNeo said:
Any chances you could provide a flashable zip that includes the kernel and those proprietary files you mentioned?
I'd be willing to give this a shot.
Sent from my Xperia V using Tapatalk.
Click to expand...
Click to collapse
It's not as simple as a quick kernel and props flash - the system depends on the kernel that is being compiled alongside - the entire ROM needs to be compiled along with the kernel or you'll get breakage.
this sounds promising...
is there anymore work planned on this rom? i would love to have omnirom...or ANY real custom ROM
I switched to kernel source from sony. Maybe i can compile new rom later. Camera is fixed some firmeware file were missing. Still problems with Wlan and GPS
I am back to omni kernel.
Wifi works now. http://d-h.st/XVF
Use wifi firmware from kernel / mint (xperia t)
check /system/etc/firmware/wlan and replace files with files from Xperia T omni.
Edit:
Recovery fixed: use this in bootrec-device
export BOOTREC_EVENT_NODE="/dev/input/event7 c 13 72"
export BOOTREC_EVENT="/dev/input/event7"
Next Camera and GPS.
both camera fixed.
next step fix gps.
edit:
gps works partial now. It did not work if you have enabled wifi
walter79 said:
both camera fixed.
next step fix gps.
Click to expand...
Click to collapse
You're awesome bro
This sounds like the rom is now ready for daily usage, isn't it? :good:
By the way, are the bsod issues gone with the new kernel source? Have you been able to test this over some time?
Sent from my Xperia V using Tapatalk.
WhiteNeo said:
You're awesome bro
This sounds like the rom is now ready for daily usage, isn't it? :good:
By the way, are the bsod issues gone with the new kernel source? Have you been able to test this over some time?
Sent from my Xperia V using Tapatalk.
Click to expand...
Click to collapse
BSOD's are now as much as you should have on a stock rom, cause it is the same kernel. So rarely Should be really stable like I have on my Xperia T!
I have to update and test my source now. If everthing works well i will build a new test rom. Files from 9.2.A.1.210 official
I m back to omnirom kernel.
Kernel works well.
ArmaNineTSeven said:
BSOD's are now as much as you should have on a stock rom, cause it is the same kernel. So rarely Should be really stable like I have on my Xperia T!
Click to expand...
Click to collapse
That's awesome! :good:
Really looking forward to test this rom!
Sent from my Xperia V using Tapatalk.
About OmniROM
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This roms works for the Samsung Galaxy Music GT-S6010/L and probably the DUOS variants too but this rom won't get dual sim working (only cm 11). Also the rom is buggy.
Source
Tree: https://github.com/Alonso1398/android_device_samsung_ivoryss/tree/omni-4.4
Kernel: https://github.com/Alonso1398/muZic_kernel_ivoryss/tree/cm-11.0
Vendor files: https://github.com/Alonso1398/proprietary_vendor_samsung_ivoryss
Patches:
Patch to hardware/broadcom/libbt for bluetooth to work: https://gist.github.com/pawitp/7891380.
Patch to frameworks/native to workaround hwc issues: (first replace with the cyanogenmod source and edit slightly to avoid compilation errors, then apply the patches):https://gist.github.com/pawitp/7891444 (replace each time it says CAPRI with RHEA) and https://github.com/PAC-man/android_frameworks_native/commit/0c81fda74f6e7f9dc5f48bd00e4dbeaef12fdbc2.
Patch to frameworks/av to fix audio/video issues: https://gist.github.com/pawitp/7945188
Patch to hardware/libhardware/include/hardware/audio.h for microphone to work: https://gist.github.com/dhinesh77/7206ec7900bee32e4c51/revisions and https://gist.github.com/Alonso1398/5235627ad9c73692b1d0 to system/core
Credits/thanks
Dhinesh77's device tree and work
Pawitp's patches
Omnirom Team
XDA forum
Agaphetos for his mdpi/ldpi omniroom bootanimation
Requirements
-Have Stock 4.1 or other rom (but not stock 4.0)
-TWRP recovery. Not tested yet with cwm.
Installation Instructions
-Make a backup just in case
-Wipe data/factory reset
-Install the rom
-Optionally install gapps (choose the package that suits you better)
-Install optionally supersu and root
Bugs/What's not working?
-Probably other features I may not use frequently
-Bluetooth half working
-Screen recording
-Activity indicator option
Download links
MEGA: https://mega.nz/#!kBxHSZIY!FmVERxhKPb07Ww4HDYGB7jYCl7Dy4pfDfiDzoOzJgGk
Dropbox: https://www.dropbox.com/s/4gchpvhgho6f52x/Omnirom 4.4 ivoryss final release.zip?dl=0
You can download other versions here
Changelog
RC 4 (final release)
-Not sure what fixed, but rom is smoother now
-Use correct overscroll glow (grey) and text select handle (blue) instead the orange ones. I think they were used from gingerbread.
-Removed OpenDelta.apk because it was not necessary for us
RC 3
-Make lockscreen widget bigger (clock will now look complete)
-Enable lockscreen widget options in low ram mode
-Some kernel perfomance improvements
RC 2
-Fix microphone
RC 1
-Fixed ril related issues (fixes calls, network search and mobile network)
-Enabled low ram and enabled lock screen widgets on low ram mode
Beta 1
-Initial release
Some notes
-If you want to use the max widget on lock screen, you must disable low ram and after enabling it, you can enable low ram again
-There is no theme engine on this rom, however you can use xposed module hk themer however not all themes will work.
Ok, this is the first not CM based rom for our phone however it is not ready for daily use. If I were able to fix bugs and be as stable as CM 11, i think could bring other roms like slimkat, dirty unicorns, etc...
Also I haven't forgot lollipop, cwm for lollipop showed a black screen and then rebooted and the rom didn't flashed on twrp (I will have to update it and I hope that was the problem) so it won't be coming soon. Also I'm building omni 4.4 because I want omni 5.X, so I may learn to fix bugs before moving directly to 5.X
Edit: Fixed ril related problems (mobile network, calls and network search) (credits to k2wl). Still need to check video recording and also should apply patche to fix system update service wake lock. A RC will be available soon . Also about lollipop progress, updated twrp (will post it soon) but still gave flashing errors, I think I will try cm 12.0 instead of 12.1
Edit2: mmm I think the system update service thing wasn't on omnirom... also noticed that microphone is not working even with dhinesh77 patch :-/
ok fixed microphone and on cm 12 too. Now it is mostly stable and maybe the next attempt should be slimkat
Ok, posted RC 3 for Omnirom and sadly I think it'll be my last omni 4.4 version soon I will stop development because i won't have too much free time. So before that, I'll release a cm 11 version with the lockscreen widget bigger and kernel perfomance changes. Then I MAY release a cm 12.1 (just source updates) and omni 5.1 version. I won't bring marshmallow (sorry about that guys ). Then that would be my good bye. It was a pleasure trying to bring some excitement to this device and give alternatives to the stock touchwiz rom. Also sorry for not being able to fix bluetooth, it gave unusual problems.
Alonso1398 said:
Ok, posted RC 3 for Omnirom and sadly I think it'll be my last omni 4.4 version soon I will stop development because i won't have too much free time. So before that, I'll release a cm 11 version with the lockscreen widget bigger and kernel perfomance changes. Then I MAY release a cm 12.1 (just source updates) and omni 5.1 version. I won't bring marshmallow (sorry about that guys ). Then that would be my good bye. It was a pleasure trying to bring some excitement to this device and give alternatives to the stock touchwiz rom. Also sorry for not being able to fix bluetooth, it gave unusual problems.
Click to expand...
Click to collapse
Thank you! I had been thinking of asking you to do a CM11 refresh with a source update because there have been a lot of security fixes in the interim but I didn't because I know you're short on time (and RC5 does work perfectly apart from that lockscreen widget issue) but thank you for all your time, effort and hard work on this tiny little device. Brilliant work! :good:
Will be looking forward to that CM11 refresh. Thank you! :good:
rahimali said:
Thank you! I had been thinking of asking you to do a CM11 refresh with a source update because there have been a lot of security fixes in the interim but I didn't because I know you're short on time (and RC5 does work perfectly apart from that lockscreen widget issue) but thank you for all your time, effort and hard work on this tiny little device. Brilliant work! :good:
Will be looking forward to that CM11 refresh. Thank you! :good:
Click to expand...
Click to collapse
Posted new cm 11. And your welcome, I enjoyed working with this device:good:
Edit: There another few things I want to do with kitkat. I think I can fix the overscroll color (gray instead of orange) and maybe something related to smoothness
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications.
Prerequisites for Installation
- Must have an unlocked bootloader
- Must have working TWRP
Known Issues
- MINOR - On Apollo there is a small glitch in rotation animation when screen transitions between on->off state
- MEDIUM - Bluetooth, GPS and LTE need to be debugged
Tips
- For ROOT ACCESS see Question 1 on the Frequently asked questions
Fresh Installation
- Factory Reset
- Flash the ROM File
- Flash any 5.1, arm 32-bit version Open GAPPS of your choice.
- Reboot
- On first boot it will take about 15-30 seconds before the boot animation appears
Upgrading to new Version
- Flash the ROM File
- Reboot
Downloads
- APOLLO rom
- THOR rom
- GAPPS
Source Code
- Kernel Source and Device Trees are here.
Credits
- Cyanogenmod
- CodeAurora
- Hashcode
- Cpasjuste
- dpeddi
XDA:DevDB Information
SlimLP, ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
ggow
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader Only
Based On: Slimroms
Version Information
Status: Beta
Created 2015-09-04
Last Updated 2019-10-02
Release Notes / Changelog
2015-09-04
- Initial Release
- Kernel:
Based off Amazon Stock 4.5.5 for which we don't have the commit history so I have manually by hand done all the updates.
Rebased MDSS MDP Driver from CAF branch LA.BF.1.1.1.c4-03300-8x74.0
Upgraded a lot of code from the same CAF branch
More features coming soon
2015-09-05
Temporary Fix for Thor screen not coming out of standby correctly
Still a tiny bit more work needed in kernel for mdss mdsp driver
2015-09-15
Rebased mdss driver now fully working on Thor
Kernel has had a lot of work, see bitbucket page for changes
RRO Layers 2.1 have not been merged yet
Tried to cherry pick RRO Layers commits but received bad object errors
Updated to latest Slim 0.7 BETA code
Bluetooth is under investigation, sees devices but doesn't seem to pair
Switched bluetooth libs to been built from source
GPS is untested
LTE is untested
Battery Stats still needs to be fixed, needs investigation
2015-09-21
Update SlimLP code
Enable Sim Toolkit
Made changes based on provided logs to try to enable LTE
Recommended Gapps is now Open Gapps, linked in the OP.
2015-10-27
Update SlimLP Code
2015-11-07
Update SlimLP Code
2016-05-02
Updated kernel to the lastest CAF branch
Updated to latest SlimLP Code
Build bluetooth stack from source
Still working on Bluetooth - passkey pairing seems to be broken
Frequently Asked Questions
Question 1:
How do I get ROOT access?
Answer:
- Unlock developer options: "Settings" ➜ "About phone" ➜ Tap the build number 7 times
- Go back to "Settings" ➜ "Developer options" ➜ "root access" ➜ choose your desired option
Thank you so much for your and other developers hard work!
Will try this rom and give you a feedback ...
Hi, I wanna give you a quick feedback after 1 hour on the thor rom...
1) after the installation (did a factory reset) it comes with a bluethoot error and the service doesnt work.
I did a restart and switched it on ... off ... on ...off the first and secound time bluethooth seems to work (but did'nt make a link) but after that the service didnt come back.
2) After I switch off the display I have to reboot to get it back. So I only get a blackscreen with backlight.
3) Rotation works well but a few apps rotate in the wrong direction. But this is not a big thing!
4) Batteryusage didnt show apps and the graphic locks buggy
this are my first impressions
cocoon
cocoon4u said:
Hi, I wanna give you a quick feedback after 1 hour on the thor rom...
1) after the installation (did a factory reset) it comes with a bluethoot error and the service doesnt work.
I did a restart and switched it on ... off ... on ...off the first and secound time bluethooth seems to work (but did'nt make a link) but after that the service didnt come back.
2) After I switch off the display I have to reboot to get it back. So I only get a blackscreen with backlight.
3) Rotation works well but a few apps rotate in the wrong direction. But this is not a big thing!
4) Batteryusage didnt show apps and the graphic locks buggy
this are my first impressions
cocoon
Click to expand...
Click to collapse
- To be honest I developed this on apollo
- Didn't really test much on thor so probably problems in the kernel causing blackscreen for thor
- seems to work flawlessly on apollo
- will look into thor issues before next build
- thanks for the early feedback
- updated op known issues
Sent from my Fire Phone using Tapatalk
Thanks!
Excellent work @ggow, I just dirty flashed Apollo version, and must say I am pretty impressed, everything vent smoothly, the only FC I get was from clock app, but that was expected... :good:
Is there any recommended xposed version working with this ROM?
So far I found one small graphic glitch, you can see it on attached picture (you can see only half of the first notification)...
OK that's all for now, going to test how fast this can burn through hdx battery, so far every LP ROM I tested on my phones was really power hungry...
I've tried this ROM.. smooth as hell...
but if I not geting wrong, no LTE...( I am on Apollo)
Is that right? Or I made something wrong...
jeryll said:
Excellent work @ggow, I just dirty flashed Apollo version, and must say I am pretty impressed, everything vent smoothly, the only FC I get was from clock app, but that was expected... :good:
Is there any recommended xposed version working with this ROM?
So far I found one small graphic glitch, you can see it on attached picture (you can see only half of the first notification)...
OK that's all for now, going to test how fast this can burn through hdx battery, so far every LP ROM I tested on my phones was really power hungry...
Click to expand...
Click to collapse
- thanks, glad you like it
- I wouldn't recommend xposed with this rom. May not play nice as aosp
ka_putt said:
I've tried this ROM.. smooth as hell...
but if I not geting wrong, no LTE...( I am on Apollo)
Is that right? Or I made something wrong...
Click to expand...
Click to collapse
- I didn't think LTE would work
- that's gonna be a separate debugging exercise
How's Bluetooth? I know CM12 has some issues.
EncryptedCurse said:
How's Bluetooth? I know CM12 has some issues.
Click to expand...
Click to collapse
- Bluetooth will probably also need a bit work
ggow said:
- I didn't think LTE would work
- that's gonna be a separate debugging exercise
Click to expand...
Click to collapse
Ah OK. Good to know..
:good:
New Build For Thor
- This temporarily patches the problem on Thor with the screen not coming out of standby properly
What is the difference between this and the CM12 one that was updated the 15th of August?
DarkenedMatter said:
What is the difference between this and the CM12 one that was updated the 15th of August?
Click to expand...
Click to collapse
- Best to try it and find out.
- New kernel based on and modified from Stock 4.5.5 and latest MSM8974 CAF branch
- Rebased MDSS kernel driver is fully functional on Apollo Devices
Does the Apollo support otg? I just plugged my USB otg from my nexus 6, but stick mount says there isn't anything that needs mounted,
holeshot77 said:
Does the Apollo support otg? I just plugged my USB otg from my nexus 6, but stick mount says there isn't anything that needs mounted,
Click to expand...
Click to collapse
- OTG support isn't available at least at the moment.
- Not completely certain what the story is with OTG on Apollo and Thor
- I have seen various comments about this
- Some have said it might be a limitation of the hardware or a limitation imposed from the bootloader.
- Needs investigating to be sure of what can be done.
well xposed for LP actually works
ggow said:
...
- I wouldn't recommend xposed with this rom. May not play nice as aosp
Click to expand...
Click to collapse
I just had to try it and it's working! :laugh:
So if anyone wants to try xposed for lollipop, go for it (make sure you don't have any "xposed leftovers" from KitKat like me (gravity box i. e.) and uninstall them first)
be sure you did nandroid backup in TWRP before you flash xposed for lollipop in TWRP (yes, framework needs to be flashed)
I used xposed-v73-sdk22-arm.zip
Reboot into ROM and install XposedInstaller_3.0_alpha4.apk
That's it, happy hacking...
YouTube in FullHD
And I don't know what magic @ggow did this time, but we finally have here YouTube app where we can choose 1080p streaming ! Yay! This just made my day!
Or Google finally allowed this for every mobile users in latest YouTube app? Anyone on CM11 or Nexus 4 can check if its there too?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
RZ Kernel aims for as stock experience as possible. It is made from Samsung's stock kernel with stability updates thanks to great guys who made ELS (exynos-linux-stable) branch
It also attempts to increase overall multitasking performance while maintaining good battery life with proper settings
Features
Adapted new Samsung EMS scheduler from Samsung 4.14 kernel (with 16ms PELT)
Gaming optimizations (reduce heat while maintaining performance stability)
Disabled battery-hogging WAKELOCKS
WireGuard and DriveDroid support
Security patch fixes adapted
Thanks to corsicanu for helping me with initial kernel support
XDA:DevDB Information
RZ Kernel, Kernel for the Samsung Galaxy S9
Contributors
remilia15
Source Code: https://github.com/diepquynh/android_kernel_samsung_universal9810
Kernel Special Features:
Version Information
Status: Testing
Created 2020-04-11
Last Updated 2020-08-27
Download link: Drive folder
CHANGELOG:
20200412: Initial release
20200823 [FINAL]: Post #10
Notices and Q&A
The kernel is based on tw10-android-4.9-q branch of ELS, which is currently at stable state from my experience
Other related features of the kernel were picked from other sources. Credits belong to the owner
The kernel's energy costs table is remade in favor of new EMS scheduler
Questions and Answers (Q&A)
Q: AnTuTu scores please?
A: This kernel isn't made for benchmarks so let's not talk about it
Q: My phone gets hot while using this kernel?
A: Short answer: It's your own issue, fix it yourself. Nobody makes a kernel just to burn your hands
Long answer:
Install Termux app from Play Store
Enable screen rotation, open Termux in landspace mode
Type this command: su -c top -d 2
A list of processes will appear and refresh with 2s interval. Find which process consumes the most CPU usage with [%CPU] column and the package name in ARGS column. You should see the culprit of your issue
Reminder: There is no such thing as "I have nothing in background but the phone still heats up". There definitely something happen and 99% of the time it's some of the rogue apps running in background
Q: Can you add X Y Z feature to this kernel?
A: I want to keep the kernel clean and simple. However, if the feature is really useful, I'll consider adapting it with proper performance check before releasing
Q: Installation procedure?
A: Simply flash the kernel with supported ROM and forget. No Magisk reinstallation needed
Reversed for future usage
Another kernel for S9 devices, awesome.?
Thanks
Updated initial release with latest defconfig base for DTC5 vendor
Limit of downloadings from google...
Hey. Will this kernel Work with dtc4 vendor?
Build kernel from scratch
I need help with building kernel outside of android build system.
I have downloaded sources from here: https://github.com/LineageOS/android..._universal9810 , installed cross-compiler, configured with "make exynos9810-starlte_defconfig", build with "make". For now I have file arch/arm64/boot/Image .
How to build correct dtb and pack it with the Image file to bootable image?
Thank you.
Second public build is coming, and this will be the final build of the kernel project!
We have been going through lots of ups and downs in the testing group, so here are the results
Changes:
Fixes zram on boot
Adapted a new kernel scheduler, supporting 32/64-bit task scheduling
Critical scheduler performance fixes
Adapted newer vendor support
As this is the final build of the whole kernel project, I'd like to say thank you to all supporters/developers who helped me improving the kernel. The whole project hasn't lasted long, but it was a great time. This and the RZ Kernel project for Exynos 8895 will also be abandoned, unfortunately
Once again, thank you for all your support!
remilia15 said:
Second public build is coming, and this will be the final build of the kernel project!
We have been going through lots of ups and downs in the testing group, so here are the results
Changes:
Fixes zram on boot
Adapted a new kernel scheduler, supporting 32/64-bit task scheduling
Critical scheduler performance fixes
Adapted newer vendor support
As this is the final build of the whole kernel project, I'd like to say thank you to all supporters/developers who helped me improving the kernel. The whole project hasn't lasted long, but it was a great time. This and the RZ Kernel project for Exynos 8895 will also be abandoned, unfortunately
Once again, thank you for all your support!
Click to expand...
Click to collapse
Arigathanks! I've been using the kernel for quite sometime and I like how it's underclocked by default. What device would you be moving to?
Sad to see such a nice kernel getting abandoned.
What needs to be done to keep it updated and relevant? Would love to keep it alive.
Using this kernel with havoc os, all is good as a daily driver battery life with this combo is awesome
Revontheus said:
Arigathanks! I've been using the kernel for quite sometime and I like how it's underclocked by default. What device would you be moving to?
Click to expand...
Click to collapse
I'm still using my daily driver (S8+) and currently don't have plans buying any other devices
BackToAndroid said:
Sad to see such a nice kernel getting abandoned.
What needs to be done to keep it updated and relevant? Would love to keep it alive.
Click to expand...
Click to collapse
Perhaps you can clone my kernel repo and do something with it. The most contemplating thing is to handle future vendor updates from Samsung. The kernel might go unbootable on latest One UI at some point, so someone must be doing the stock defconfig update (that's the least requirement to boot One UI ROMs with newer vendor)
Hmmm....Usually I can verify that the kernel has been installed by checking it's build date. But it still shows the same like before. I'm running official LOS and flashed the kernel in LOS recovery. According to the log it went fine. Maybe it doesn't work with that recovery?
Edit: Ok, in TWRP it works fine.
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
It works without issues for the most part except for USB C audio output which stutters compared to stock kernel.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
I tried it. Some tweaks not working like showing download speed and reverted back the old power menu (no emergency call) which is baked in the rom and the settings menu changes like 2 battery options in the menu. One is fixed at maximum power saving and cant change while another is on the device health or something which can be change. I also found that sometimes it ramps up the clocks without any reason i still manage to get 4.5-5.3hrs of sot with light usage. The chrome is unusable since it bugged out like its inverted color and cant see sh*t.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
Just flashed it - seems to work fine with 1.8
UweRammelt said:
Just flashed it - seems to work fine with 1.8
Click to expand...
Click to collapse
How was the standby drain? What twrp did you use? I used 3.4.0.0 of TWRP. The chrome is super dark and cant see. Can you confirm this or im an isolated case? Do you think its because of not using twrp 3.3.1.1 that bugged mine? Hope you can help me. Thanks!