Related
Notice: Probably won't be keeping up with this much longer. CM has a slew of other commits, but I've only been including the two responsible for the discoloration...
Franco:
I've compiled franco's kernel with two cherrypicks from CM's github: c53fb6d134 and 07cbfb9a9c
These are required for recent nightlies of CM and its derivatives (caveat: if your rom specifically has commits reverted to not require such a workaround, then of course this isn't pertinent to you).
No changes to ramdisk or .config. Compiled using arm-linux-androideabi-4.7 from android ndk r9.
It should go without saying that you shouldn't flash this unless you understand what those commits are for and have a need for them. Those using the "colorfix" zip or otherwise reverting to an earlier liboverlay.so will find that method no longer "works" with newer builds (it spewed errors in dmesg nonstop when it worked).
IMPORTANT: Make sure you update to the new liboverlay.so if you're currently using the old one or you will have problems. Flash this on a rom that doesn't have the corresponding rom-side commits and you will of course have problems too (and I will laugh at you). As well, make sure to remove any addon.d script that you may have been using, if applicable. I don't know if there are multiple "colorfix" zips in circulation, but the one that I came across looks like it creates /system/addon.d/95-cm.sh. After deleting this file, you should be able upgrade/reflash the rom to bring liboverlay.so back up to date. Or if you're lazy/inept, wipe /system and reflash your rom+gapps.
Because of ramdisk customizations (incompatibilities) among roms/kernels, this zip will attempt to patch your existing ramdisk with franco's changes during flash. Things can obviously go wrong, so be ready.
4.4: 2013.11.29 1411ET: [franco-r195-cm-ziddey.zip]
4.4: 2013.11.25 0257ET: [franco-r194-cm-ziddey.zip]
4.3: 2013.10.26 2049ET r193: [JWR] [JSS/JLS]
-------------------------------------
Faux:
I built faux's kernel with the two commits as well.
4.4.1/4.4.2:
Faux: [030u-CM] [030m-CM]
4.4:
Faux: [029u-CM] [029m-CM]
4.3:
Faux: [028u-JSS] [028m-JSS] [028u-JWR] [028m-JWR]
Faux: [027u-JSS] [027m-JSS] [027u-JWR] [027m-JWR]
Note this is an "anykernel" and uses whatever the existing ramdisk is. If switching from Franco (or another kernel that includes a ramdisk), a "reset" kernel is recommended (reflash rom).
Built with arm-linux-androideabi-4.7, with bfd linker instead of gold.
Same as cm10_colorfix.zip?
Thanks alot! I will see if I can comment on any improvement in battery life or performance.
Sent from my Nexus 4 using Tapatalk
I don't think that these two patches will improve performance or battery life.
droidjam said:
I don't think that these two patches will improve performance or battery life.
Click to expand...
Click to collapse
But the use of incompatible library and the constant stream of errors caused by it may impact negatively on them.
Sent from my Nexus 4 using Tapatalk
Thanks alot for doing this.
Will be flashing this soon, all of @ziddey's mods have worked great!
Using this kernel for a while now. Working good if not better.
Thanks ziddey , for filling in such gaps whenever needed. That helps in keeping the ecosystem open to choices
Sent from my Nexus 4
Just flashed will test battery ect
Sent from my Nexus 4 using xda app-developers app
Is there a specific build I should be on when using PAC? I'm on the 16 and even with colorfix I can only use one other kernel that I know of, hells core. Others don't let me pass the boot animation. The same thing happens with this kernel. No colorfix and I used jss
Sent from my Nexus 4 using Tapatalk 4
Thanks a lot, it works great! I hope you will keep this updated when Franco releases a new version.. I should definitely learn how to compile it by myself
Inviato dal mio Nexus 4 con Tapatalk 4
NUNsLAUGHTER92 said:
Is there a specific build I should be on when using PAC? I'm on the 16 and even with colorfix I can only use one other kernel that I know of, hells core. Others don't let me pass the boot animation. The same thing happens with this kernel. No colorfix and I used jss
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
link to kernel source for pac
ziddey said:
link to kernel source for pac
Click to expand...
Click to collapse
RoliSoft said:
According to this https://github.com/PAC-man/android_vendor_pac/blob/cm-10.2/dependencies/mako.dependencies dependency list, the complied kernel for mako is this: https://github.com/zyonee/android_kernel_google_msm
Click to expand...
Click to collapse
And you said as of which build did it stop working, 10/16? There haven't been any new kernel commits since 10/3: https://github.com/zyonee/android_kernel_google_msm/commits/cm-10.2
Further, here's the cm kernel git for comparo: https://github.com/CyanogenMod/android_kernel_google_msm/commits/cm-10.2
https://github.com/PAC-man/android_vendor_pac/blob/cm-10.2/dependencies/mako.dependencies
It uses cm's mako repo.
ziddey said:
And you said as of which build did it stop working, 10/16? There haven't been any new kernel commits since 10/3: https://github.com/zyonee/android_kernel_google_msm/commits/cm-10.2
Further, here's the cm kernel git for comparo: https://github.com/CyanogenMod/android_kernel_google_msm/commits/cm-10.2
https://github.com/PAC-man/android_vendor_pac/blob/cm-10.2/dependencies/mako.dependencies
It uses cm's mako repo.
Click to expand...
Click to collapse
I haven't been able to since I used the 10/9 nightly. If there haven't been any other changes then I don't know why it won't work. I wiped data before going to the nightly on the 16th and it would boot if I didn't flash a different kernel, but if I did then it'd stay on the boot animation forever. It does that for the 20th too, although I didn't wipe data before going to the nightly.
Sent from my Nexus 4 using Tapatalk 4
Thank you thank you thank you!
Stock camera wont start with this kernel for me on latest 2013-10-21 nightly for me.
Fine here. Referring to gallerygoogle and not gallery2
Sent from my phone. Please forgive typos and brevity.
build r192 is available on Franco's thread
http://forum.xda-developers.com/showpost.php?p=46663872&postcount=50533
Uh huh
Sent from my phone. Please forgive typos and brevity.
NEXT RELEASE: 27 AUGUST 2014 GMT+8 0900
With the introduction of so many kernels in the forums, every user just wants his/her phone to enjoy the crisp experience of their device. With ASKP, you get to enjoy the brilliant works of all developers into one small kernel. ASKP, is a modified kernel that merges many tweaks together, just like P.A.C.
ASKP is only run by me and pattyboi for now. Please bear with the slow speed of updates. I'm working on 3.4 for the Galaxy Nexus and also for you guys at the same time.
I promised before, ALL ROMS WILL BE SUPPORTED. But when I say ASKP is fully released. For now, I'll be releasing slowly. So please bear with me.
Supporting Devices:
LG G2
Samsung Galaxy Nexus
Variants of ASKP released for per-ROM basis statuses: http://forum.xda-developers.com/showpost.php?p=53569650&postcount=6
READ THIS FIRST
- There's always a name in each file right? The word at the end is the most important. And of course, make sure the model number is correct.
ONLY TWO WORDS ARE GIVEN FOR SIMPLICITY. STOCK and CAF.
- CAF kernels are for AOSP ROMs. A N/CAF (Non-CAF AOSP) Kernel will also be present upon full release of ASKP.
- ASKP has just started venturing into G2's development, please be patient if there is no support for your ROM yet.
- I am not responsible for any problems incurred on your device. This kernel is not fit to be a daily driver YET. Still in pre-alpha stage.
Changelog To Be Released after Alphas.
Downloads: http://forum.xda-developers.com/devdb/project/?id=4678#downloads
Savoca's Mirror: http://savoca.co/Amperific
Source: https://github.com/AmperificSuperKANG/G2-Kernel.git
Credits:
Everyone. From XDA.
As well as savoca for his awesome file transfer access to me.
Special Thanks to Dorimanx for the help in packing up the boot.img.
Based on: Dorimanx's Stock v20D Source. (Pulled from him as the internet connection I have is incapable of pushing a 1GB+ Source). This is a CLEAN LG Source.
I also want to thank him for his own build script, without it, I couldn't have built kernels as fast as before.
If you'd like to donate to me, Please do so, It'll be used for creating a tracker and an FTP site.
So you're buying yourself a beer. Heheh.
I really thank you!
Donors Hall of Fame:
- nope
XDA:DevDB Information
Amperific SuperKang Project, Kernel for the LG G2
Contributors
Amperific, Dorimanx, pattyboi
Kernel Special Features: Advanced Memory Hotplugging System
Version Information
Status: Testing
Created 2014-06-21
Last Updated 2014-06-21
XDA:DevDB Information
Amperific SuperKang Project, Kernel for the LG G2
Contributors
Amperific, Dorimanx, pattyboi
Kernel Special Features: Advanced Memory Hotplugging System
Version Information
Status: Alpha
Created 2014-06-21
Last Updated 2014-08-26
Nice! And the important advice for You right now: You REALLY SHOULD write which ROMs do You support and which G2 variants.
There are some ROMs based on dr87 sources like SlimKat, and Mahdi ROM itself, there is CarbonROM and PA which use other sources.
Aaand there is CM which didn't even get updated to KK sources, lol.
reas0n said:
Nice! And the important advice for You right now: You REALLY SHOULD write which ROMs do You support and which G2 variants.
There are some ROMs based on dr87 sources like SlimKat, and Mahdi ROM itself, there is CarbonROM and PA which use other sources.
Aaand there is CM which didn't even get updated to KK sources, lol.
Click to expand...
Click to collapse
I don't care. Like I said. I'm a welfare guy, EVERYONE GETS THEIR ASKP DESSERT.
For now, on wich ROMs will this work? I am a noob and don't know about sources and compatibilities...
Sent from my G2 running CloudyG3 on ART
reas0n said:
Nice! And the important advice for You right now: You REALLY SHOULD write which ROMs do You support and which G2 variants.
There are some ROMs based on dr87 sources like SlimKat, and Mahdi ROM itself, there is CarbonROM and PA which use other sources.
Aaand there is CM which didn't even get updated to KK sources, lol.
Click to expand...
Click to collapse
Amperific said:
I don't care. Like I said. I'm a welfare guy, EVERYONE GETS THEIR ASKP DESSERT.
Click to expand...
Click to collapse
NEO2598 said:
For now, on wich ROMs will this work? I am a noob and don't know about sources and compatibilities...
Sent from my G2 running CloudyG3 on ART
Click to expand...
Click to collapse
I think that this is for stock roms as its based on dori's sources.
Sent from my LG-D801 using Tapatalk
NEO2598 said:
For now, on wich ROMs will this work? I am a noob and don't know about sources and compatibilities...
Sent from my G2 running CloudyG3 on ART
Click to expand...
Click to collapse
You're using Cloudy's G3 eh. You're on luck. That's the first one.
Releases In order for Stock G2 and Ported G3 ROMs,
D802 (Released)
D800 (Released)
D801 (Released)
D803
VS980
LS980
After this,
Releases for All devices for Paranoid.
Then,
Releases for All devices for CM.
Also,
Releases for All devices under Mahdi's Sources.
Finally,
Releases for the next MOST requested ROM.
After this, expect features to fly in.
@nimrodsv Go ahead and ask him.
Guys, once again. THIS IS NOT A COPY OF DORIMANX.
I only copied his RAMDisk with his permission. Without it, I wouldn't be able to boot on the majority of ROMs.
The kernel source itself will be different from his indefinitely.
Wow, I am so lucky ☺
I will test it and let you know how is it. Thanks for replying.
Sent from my G2 running CloudyG3 on ART
Can't wait for the d800 PA release. Going to flip my ****.
Sent from my LG-D800 using XDA Premium 4 mobile app
@Amperific i flashed the kernel on CloudyG3 and I see that it has everything what @dorimanx kernel has... Also STweaks.
Sorry to say that, but for now it looks like the Dorimanx Kernel with other name
EDIT: not only STweaks. Governors, Hotplugs, etc, everything is the same, I think You should delete it for now. I think that STweaks can be used by everyone, but well, for now it looks like u copied his kernel and changed the name lol
reas0n said:
@Amperific i flashed the kernel on CloudyG3 and I see that it has everything what @dorimanx kernel has... Also STweaks.
Click to expand...
Click to collapse
Sigh. STweaks is from his ramdisk. And I'm reverting all his commits. by r5, Whatever I don't want won't be there.
Sent from my LG-D802 using Tapatalk
Please read up guides on what comes with a ramdisk and a zImage itself. A boot.img is made from a ramdisk and a zImage. Even though the STweaks app exists, it doesn't mean everything works. I don't have Intelli features inside. so use your eyes please. I'm trying to be kind and patient.
reas0n said:
@Amperific i flashed the kernel on CloudyG3 and I see that it has everything what @dorimanx kernel has... Also STweaks.
Sorry to say that, but for now it looks like the Dorimanx Kernel with other name
EDIT: not only STweaks. Governors, Hotplugs, etc, everything is the same, I think You should delete it for now. I think that STweaks can be used by everyone, but well, for now it looks like u copied his kernel and changed the name lol
Click to expand...
Click to collapse
Amp is a well known dev in the galaxy nexus forum (last that's where I know him and his work from) he's already stated he's using Dorimanx ram disk. So telling this guy to delete his thread is a **** move.
Sent from my LG-D800
YoungDaddy said:
Amp is a well known dev in the galaxy nexus forum (last that's where I know him and his work from) he's already stated he's using Dorimanx ram disk. So telling this guy to delete his thread is a **** move.
Sent from my LG-D800
Click to expand...
Click to collapse
Thank you.
But if you really don't appreciate my work, It's fine. I'll stop.
Not like I don't have other plans.
Anyways, Every development has its start. I admit. I have some dorimanx's commits. I'm reverting them currently till r5. Once we go past r5, I'll start working on pushing commits in.
If you see my development style in tuna, I do things part by part, in a systematic way.
YoungDaddy said:
Amp is a well known dev in the galaxy nexus forum (last that's where I know him and his work from) he's already stated he's using Dorimanx ram disk. So telling this guy to delete his thread is a **** move.
Sent from my LG-D800
Click to expand...
Click to collapse
You guys misunderstood me, meh. I didn't even say anything about the THREAD. It's the first one. The second one is, I just report to the dev what I see, I didn't say that it's a steal or anything, I just said that situation like that exists. Because i saw that there's everything like in dorimanx kernel, than maybe something went wrong with making the kernel.
Oh and about Intelli features, i see there are Intellidemand/Intelliactive govs, EcoMode, Intelli HotPlug, I REPORT it, REPORT, not ACCUSE.
Dang i hate misunderstandings. I appreciate every work and never want to make someone stop his work. Duh.
If dorimanx allowed to share everything with features he added like this now, then it's alright, I just reported in case he didn't allow it and You wouldn't see that or something.
So @Amperific keep going and sorry that u understood me wrong
Finally. We need more kernel devs. Thanks for joining the party!
Amperific said:
Thank you.
But if you really don't appreciate my work, It's fine. I'll stop.
Not like I don't have other plans.
Anyways, Every development has its start. I admit. I have some dorimanx's commits. I'm reverting them currently till r5. Once we go past r5, I'll start working on pushing commits in.
If you see my development style in tuna, I do things part by part, in a systematic way.
Click to expand...
Click to collapse
Keep on doing what you do bro. Can't wait to try some askp goodness on my d800 [emoji1]
Sent from my LG-D800
Sorry. Apologies from me too.
Next few builds,
- Mitigate commits that are not needed
- Bring in ASKP's tweaks
Sent from my LG-D802 using Tapatalk
Amperific, please don't stop your build. Coming from a gnex us users know your kernels are gold. I can't wait to try it out. I'm sure once non gnex users install the kernel they will see the magic. My request for you is a kernel that works with vanir on my d800. I'm a flashaholic so I jump from vanir, aicp, mahdi ect but just can't wait to try this bastard out??????
Sent from my LG-D800 using XDA Premium 4 mobile app
Guys before I sleep,
All Stock variants are up.
And I apologise about the CAF guide.
I briefly scanned through the source and realised that there are different variations of CAF. CMs, and etc. Even LG.
So all variations will be made available as well.
Nights
Do I need to go back on dalvik before flashing this kernel?
Currently i am on ART. If I stay on ART installation is the same? (wipe cache and dalvik then flash the kernel).
Thanks.
Sent from my G2 running CloudyG3 on ART
I was told that dalvik /ART is rom related not kernel
Sent from my VS980 4G using XDA Free mobile app
July 24: this is my build with Dorimanx kernel compiled with Linaro 4.9 arm-eabi and the rest compiled with Linaro 4.9 arm-linux-eabi. In short, all facets of this ROM are compiled with Linaro 4.9.
Link here: AOSB_All_Linaro
I use this as my daily driver. Works perfectly so far!
As always, I'm not responsible for any damage or problems you may experience with this ROM
ishyesh said:
This is my compiled version of AOSB 1.3.6 with two different 4.4.2 Kernels: JackpotCalvin's and Dorimanx'
JackpotCalvin:
aosb_kk_1.3.6_vs980.zip
Dorimanx:
aosb_kk_1.3.6_vs980_dorimanx.zip
I haven't had a chance to flash these yet.
As always, I'm not responsible for any damage or problems you may experience with this ROM
Click to expand...
Click to collapse
Where did u find dorimax that can run asop roms? Bout to load and flash...
Sent from my VS980 4G using Tapatalk
kenbrownstone said:
Where did u find dorimax that can run asop roms? Bout to load and flash...
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Bart from vanir patched it to make it work.
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Flashed the JC version. So far so good. Still loading up apps.
@ishyesh
Thanks again for the builds. Still haven't flashed your jackpotclavin build, I downloaded the dorimanx version, I'll give that a flash first.
Edit, nvm, I forgot Mahdi uses n5 sounds versus lg
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Running dorimanx version and it is running great. Thanks!
Lawlrus said:
@ishyesh
Thanks again for the builds. Still haven't flashed your jackpotclavin build, I downloaded the dorimanx version, I'll give that a flash first.
Edit, nvm, I forgot Mahdi uses n5 sounds versus lg
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Click to expand...
Click to collapse
So far the JC build is great. I forget how much I miss AOSP. I'm loving the hover and having Halo again. I installed V4A and the volume is great.
After running for awhile, I wasn't able to get the ROM to sleep at all. Wakelock detector really didn't show anything and neither did better battery stats.
fordmanck said:
So far the JC build is great. I forget how much I miss AOSP. I'm loving the hover and having Halo again. I installed V4A and the volume is great.
After running for awhile, I wasn't able to get the ROM to sleep at all. Wakelock detector really didn't show anything and neither did better battery stats.
Click to expand...
Click to collapse
I can confirm on the dorimanx build, that the same thing is keeping it from sleeping as well.
Seems like a lot of cm base Roms are having the issue. Gotta love cm butchering commits.
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Do core 3 and 4 not respond to any changes in CPU frequency governors? The best way to test would be to try and change the governor from conservative to performance. What should happen is that core 3 and 4 should be going full blast on the performance governor but not the conservative governor.
Thanks!
Lawlrus said:
I can confirm on the dorimanx build, that the same thing is keeping it from sleeping as well.
Seems like a lot of cm base Roms are having the issue. Gotta love cm butchering commits.
Sent from my Vs980 running Jackpotclavins Cm11 4.4.4
Click to expand...
Click to collapse
ishyesh said:
Do core 3 and 4 not respond to any changes in CPU frequency governors? The best way to test would be to try and change the governor from conservative to performance. What should happen is that core 3 and 4 should be going full blast on the performance governor but not the conservative governor.
Thanks!
Click to expand...
Click to collapse
I actually tried both builds and it didn't sleep on either. I won't have time tonight but I'll restore tomorrow and give it a whirl.
Sent from my VS980 4G using Tapatalk
ishyesh said:
Do core 3 and 4 not respond to any changes in CPU frequency governors? The best way to test would be to try and change the governor from conservative to performance. What should happen is that core 3 and 4 should be going full blast on the performance governor but not the conservative governor.
Thanks!
Click to expand...
Click to collapse
Seems like cm pushed a fix for the sleep issue, at least on crDroid. I had an issue with it not sleeping, then after the build today, no issues at all.
Sent from my Vs980 running crDroid 4.4.4
Lawlrus said:
Seems like cm pushed a fix for the sleep issue, at least on crDroid. I had an issue with it not sleeping, then after the build today, no issues at all.
Sent from my Vs980 running crDroid 4.4.4
Click to expand...
Click to collapse
Good to know. I'll flash this over when there's a new build. I'd prefer the JC kernel if possible just because I won't have to redo anything on my backup. I've commenced operation "Drink Beer" already so it won't happen today. Happy 4th to all!
Sent from my VS980 4G using Tapatalk
Thanks for the update! I'll hunt down the commit and compile soon! Enjoy July 4th =)
I'm running though some trouble with SystemUI repetitive force closing on my latest AOSB builds...I have a hard time tracing what's wrong. Whenever I get a build running properly, I'll post it right away!
New builds!
Alright everyone, I've posted new builds for the vs980 with the Dorimanx and the Render kernels. I haven't had a chance to test these out yet, my phone is getting back from warranty replacement.
Also, you'll notice there are d800 builds present. I'm not going to start a thread in the LG G2 AT&T forums because AOSB officially supports d800. However, please feel free to use these. I haven't yet tested out the d800 builds either.
EDIT: I haven't seen any changes on the Beanstalk github page, so I'm going to focus my efforts on compiling AOSB for now.
ishyesh said:
Alright everyone, I've posted new builds for the vs980 with the Dorimanx and the Render kernels. I haven't had a chance to test these out yet, my phone is getting back from warranty replacement.
Also, you'll notice there are d800 builds present. I'm not going to start a thread in the LG G2 AT&T forums because AOSB officially supports d800. However, please feel free to use these. I haven't yet tested out the d800 builds either.
EDIT: I haven't seen any changes on the Beanstalk github page, so I'm going to focus my efforts on compiling AOSB for now.
Click to expand...
Click to collapse
I'll download and give them a whirl tomorrow. Have you read anything about mms issues? I know I was seeing it and I've read others were too.
Sent from my VS980 4G using Tapatalk
I downloaded and installed the render version, constant system.ui errors on the set up screen.
mjones73 said:
I downloaded and installed the render version, constant system.ui errors on the set up screen.
Click to expand...
Click to collapse
Guess i'll be holding off then. Lol
Thanks
Hi all, new build is up which is compiled with ALL linaro 4.9 toolchains. I have a vs980 in hands now, and have tested it out. ROM works flawlessly. Kernel, even more so =D
ishyesh said:
Hi all, new build is up which is compiled with ALL linaro 4.9 toolchains. I have a vs980 in hands now, and have tested it out. ROM works flawlessly. Kernel, even more so =D
Click to expand...
Click to collapse
Have you tried booting in art? Can't seem to get it working for me after removing xposed and app settinga
Sent from my LG-VS980
So does this mean cyanogenmod will be coming to us soon since we have root and recovery?
I also wanna know if now that we have root can we fix touch screen issues?
Sent from my LG-H811 using Tapatalk
Look at this:
http://forum.xda-developers.com/g4/development/discussion-project-cm12-1-h815-eur-t3150533
First tries, but now where many us-devs have t-mobile unlocked bootloaders they can start experimenting.
I been looking for the kernel tree. Once i get it i will biuld many roms. The problem they have there is that the kernel they are using is not the one for the device. I think i can bring at least cm12.1, validus, tesla, dirty unicorns, broken and blisspop just to mention few. But again i need the device tree to start building.
Slicktune said:
I also wanna know if now that we have root can we fix touch screen issues?
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Look for SGS Touchscreen Booster, install it from Play, slide the top bar all the way to the left, and click all of the apply buttons. It's fixed my touchscreen issues.
Sent from my toaster
Hopefully once ROMs start to flow in, we won't have continuous bluetooth issues like we did with the G3.
Sent from my LG-H811 using Tapatalk
TecknoFreak said:
I been looking for the kernel tree. Once i get it i will biuld many roms. The problem they have there is that the kernel they are using is not the one for the device. I think i can bring at least cm12.1, validus, tesla, dirty unicorns, broken and blisspop just to mention few. But again i need the device tree to start building.
Click to expand...
Click to collapse
I wanna start getting into more in-depth android phone stuff. Would you help me out with a way to get started
Sent from my LG-H811 using Tapatalk
Give it time. The M9 dev community is still working out the bugs in the beta CM12.1 builds.
Sent from my toaster
TecknoFreak said:
I been looking for the kernel tree. Once i get it i will biuld many roms. The problem they have there is that the kernel they are using is not the one for the device. I think i can bring at least cm12.1, validus, tesla, dirty unicorns, broken and blisspop just to mention few. But again i need the device tree to start building.
Click to expand...
Click to collapse
I'm coming over from the g2 and want to encourage a BlissPop build once the kernel tree allows you to start building.
TecknoFreak said:
I been looking for the kernel tree. Once i get it i will biuld many roms. The problem they have there is that the kernel they are using is not the one for the device. I think i can bring at least cm12.1, validus, tesla, dirty unicorns, broken and blisspop just to mention few. But again i need the device tree to start building.
Click to expand...
Click to collapse
Isn't this the kernel tree for the T-mobile LG G4 H811? I know these open source vendor repos don't always build easily without tweaks (and sometimes big time makeovers), but this is where I was going to start with some hobby builds.
http://opensource.lge.com/osSch/list?types=NAME&search=H811
TecknoFreak said:
I been looking for the kernel tree. Once i get it i will biuld many roms. The problem they have there is that the kernel they are using is not the one for the device. I think i can bring at least cm12.1, validus, tesla, dirty unicorns, broken and blisspop just to mention few. But again i need the device tree to start building.
Click to expand...
Click to collapse
I'd also love to see BlissPop on the G4. I spent a little time with it when I had the G3, and I loved its interface.
anyone else facing bluetooth issues?
---------- Post added at 12:53 PM ---------- Previous post was at 12:36 PM ----------
it keeps disconnecting from my headset and I have to connect it back manually.
what is this?
cm + kernel/tree/vendor specific optimizations
instructions:
flash firmware (if coming from miui)
flash rom (dl link in 2nd post)
flash gapps
source: cm-fk
this would not have been possible if it weren't for:
umang96, thestrix, banmeifyouwant, cyanogenmod, themuppets
rules: be nice & off-topic is <3 here.
latest release (cm14 ambient display back ported!)
Seems interesting. Will report back soon.
Sent from my Redmi Note 3 using Tapatalk
thakurneel said:
Seems interesting. Will report back soon.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Please do, i have been using this as my daily driver for about a day now and it delivers.
Goodix FP supported on this ROM ??
bravonova said:
Goodix FP supported on this ROM ??
Click to expand...
Click to collapse
if it does not work for you on official CM13, it won't work here unfortunately, sorry :/
Nice, will try it, also, don't use uber/saber/other tc, stock one works best and very stable.
Umang96 said:
Nice, will try it, also, don't use uber/saber/other tc, stock one works best and very stable.
Click to expand...
Click to collapse
Thanks
Yeah i was a bit skeptical on saber tc and all the other tc's and that's why i made my first build with the stock tc, but i might make a personal build later and compare.
DiamondBond said:
Thanks
Yeah i was a bit skeptical on saber tc and all the other tc's and that's why i made my first build with the stock tc, but i might make a personal build later and compare.
Click to expand...
Click to collapse
Also try to do odex all apps, there is an unofficial odexed cm13 available for OP3 in xda forum, also, you can directly build with radon if you want, just clone radon-cm branch of my kernel instead of stock cm source.
Umang96 said:
Also try to do odex all apps, there is an unofficial odexed cm13 available for OP3 in xda forum.
Click to expand...
Click to collapse
I'll have a look into odexing during builds (idk if that's possible), but from past experiences, it does not really offer much, it just saves device storage space (which is why it was so heavily used back in 2010-2012 on those ~1gb internal storage devices lol)
flashing, will review
RaunakRM said:
flashing, will review
Click to expand...
Click to collapse
thanks
Just flashed it, first impression the ROM is smooth. But would you also provide the ones compiled using UBERTC4.9 or Linaro4.9? I would be glad to be the first one who tried it. Even if it causing errors and whatsnot.
interesting project .Just curious, your build is base on snapshot or nightly cm13 build ?
If this rom uses radon kernel in-built for future builds.... It would be like a best rom+ will narrow down any bugs arising due to rom or kernel
MOVZX said:
Just flashed it, first impression the ROM is smooth. But would you also provide the ones compiled using UBERTC4.9 or Linaro4.9? I would be glad to be the first one who tried it. Even if it causing errors and whatsnot.
Click to expand...
Click to collapse
As I discussed above, I might make a second build soon with Uber TC but optimizing all apks by hand literally takes me an entire 5-6 hours (of which I sit infront of my computer decompiling apk's and optimizing each and every .PNG inside of them then recompiling them and sending them to my device to make sure I have not messed up any graphics in those apk's, hence why this was built 23/8/16 but I only finished the optimizations by today.
thanhnvt194 said:
interesting project .Just curious, your build is base on snapshot or nightly cm13 build ?
Click to expand...
Click to collapse
It's based on the latest cm13 sources from 23/8/16 so I guess you could say it's based on nightly sources lol
Dr. Joy Das said:
If this rom uses radon kernel in-built for future builds.... It would be like a best rom+ will narrow down any bugs arising due to rom or kernel
Click to expand...
Click to collapse
I'll speak with Umang and see if he will let me compile with Radon kernel
Just flashed it,
Rom is smooth
N everything works fine
Battery is decent have to test more with full charge
Awesome bro
Sent from my Redmi Note 3 using XDA-Developers mobile app
Could i update nightly by system updater? Or you must upload new build?
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka
Not able to download the ROM from the given link..can u please provide me a different download link?..thank you
hitesh1792 said:
Not able to download the ROM from the given link..can u please provide me a different download link?..thank you
Click to expand...
Click to collapse
Same problem. Webpage not available.
Please upload on other website.