Database Develop

Dualboot for i9295[a touch of Freedom] :)

IMPORTANT! This is NOT my work, all credits to the Genius chenxiaolong who made this available for all Galaxy S4 Variants
See original Thread [PATCHER][APP] Dual boot any ROM on all Galaxy S4 variants!
The Story:
I don´t like Touchwiz very much but for some Reasons I always have to come back to it. Maybe the Camera, sometimes the Allshare Features for Smart TV...Everybody has his Reasons to use/need it sometimes...
Untill today, I had to backup/restore between Sammy and Cyanogenmod a lot, It bugged me but I thought there is no choice till I found this Thread. First, I was a little afraid because there is a lot of Information in the OP and some stuff to do but then I thought, what may happen? Bootloop, Odin, Hard-brick,naaah, what´s Life without a little risk?
So I tried and it works !
If you want to do what I did, just follow these (very easy) Instructions.
Think about what your doing. This is your very own Device with your very own contract so please proceed at your very own risk! I have tested this exactly the way it is written down here and it worked. So if something goes wrong on your Device, don´t blame me or the Developer of this fantastic App!!
...Make sure your an owner of the international Samsung Galaxy S4 Active (i9295) (if not, tell me what happened )
...If your on a stock Sammy Rom, make sure that you are rooted and have a custom recovery installed...
...Also, you will need to delete some System Apps to free Space for secondary Rom but please don´t ask me which. There is enough Bloatware inside but a good start for me always is "HRS Hotels", "Google Maps/Mail/Plus" and so on...
1. Download the 3 Files from chenxiaolong´s Thread (not linked but you will find it...remember, this is NOT my work!)
- Dualboot Patcher
- Dualboot Switcher App
- Dualbootutility.zip
2. Download the custom Rom of your choice. In my case, I used
cm-10.2-20131227-UNOFFICIAL-jactiveltexx.zip
and official Gapps
3. Install the Dualboot Patcher and run it on your Device
4. Follow its Instructions to patch your custom Rom and, if needed, also the Gapps
5. Install the Dualboot Switcher App and run it
6. Set current Kernel as "Primary ROM´s Kernel"
7. Reboot into recovery
8. Flash your patched Rom File(s)
9. Reboot (the Device will NOW boot into secondary Rom!)
10. Install Dualboot Switcher App in 2nd Rom
11. Now you can choose between primary and secondary Rom to boot
12. Done
Please press THANKS in original Thread and, if you can, donate some to chenxiaolong because this is awesome!!!
Easy, isn´t it? Yes, it is. It is exactly what I was looking for because now I can use both worlds, the beautiful and the beast
English wasn´t my Mother´s language so please excuse me for mistakes you surely will find
Greetings
Thomas

I have uploaded patched Gapps and a patched Cyanogenmod Rom here. Feel free to use
cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot.zip
and
gapps-jb-20130813-signed_dualboot.zip
Greetings
Thomas

At what point to flash the 2nd ROM?
Hi,
To me the instructions are not very clear. At what point do I install/flash the 2nd rom. For example if my current ROM is CM10.2, how do I get a second rom (sammy) onto the phone?
Can you be a bit more precise on the steps?
Thank you very much

marcelser said:
Hi,
To me the instructions are not very clear. At what point do I install/flash the 2nd rom. For example if my current ROM is CM10.2, how do I get a second rom (sammy) onto the phone?
Can you be a bit more precise on the steps?
Thank you very much
Click to expand...
Click to collapse
Hey,
if you want to flash a Sammy Rom as 2nd Rom you need to have it as a flashable zip File (you will find them here in this Forum)
This should be the 2nd step in OP then, so just continue with the list
But don´t forget to delete some Files from /system of the Stock Rom to have enough Space for both Rom inside the /system Folder of your Device.
I hope that helped ?
Greetings
Thomas

ohwarumbloss said:
Hey,
if you want to flash a Sammy Rom as 2nd Rom you need to have it as a flashable zip File (you will find them here in this Forum)
I hope that helped ?
Greetings
Thomas
Click to expand...
Click to collapse
But i won't find a flashable zip of latest I9295XXUBML3 stock firmware in here? or can i make it myself (with Aroma)?

@d8389 posted mk3 here ( http://forum.xda-developers.com/showthread.php?p=45757227) and there are no big changes in ml3 I think.
But, why not flash Sammy as primary with Odin, makes things way easier
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app

ohwarumbloss said:
@d8389 posted mk3 here ( http://forum.xda-developers.com/showthread.php?p=45757227) and there are no big changes in ml3 I think.
But, why not flash Sammy as primary with Odin, makes things way easier
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
Sorry for not understanding:
I would love to do precisely that, but that way i will loose root and have to re-install CMW-recovery won't I?
I will try to figure out the steps to take:
1. Reboot into CWM and install DualBootUtilities
2 .Set CM10.2 somehow as Secondary ROM?
3. Flash your already patched CM10.2 ROM and GAPPS on 2nd ROM
4. Somehow set 1st ROM active and connect in Download-mode to ODin and Flash I9295XXUBML3.tar.md5 ?
Going in the right direction ??

ZeroZorro said:
Sorry for not understanding:
I would love to do precisely that, but that way i will loose root and have to re-install CMW-recovery won't I?
I will try to figure out the steps to take:
1. Reboot into CWM and install DualBootUtilities
2 .Set CM11 somehow as Secondary ROM?
3. Flash your already patched CM11 ROM and GAPPS on 2nd ROM
4. Somehow set 1st ROM active and connect in Download-mode to ODin and Flash I9295XXUBML3.tar.md5 ?
Going in the right direction ??
Click to expand...
Click to collapse
Let's say you've set up a Sammy Rom completely including root and cwm recovery. The normal way as usual.
If you downloaded the already patched Files, place them somewhere you can find em.
Now, install and start the "Dualboot Switcher" app and set first Rom as primary.
Boot into Recovery.
Install the patched Files the normal way.
Reboot, phone will boot into second Rom now by default.
Once, second Rom has booted, install and run the "Dualboot Switcher" app again. Inside the App you can now choose which Rom to boot, then push reboot Button inside the App.
Done
I hope that helped but feel free to ask!
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app

Thanks again for helping me/us...great!
Started with:
Rooted S4Active with cm-10.2-20131227-UNOFFICIAL-jactiveltexx, gapps-jb-20130813-signed and CWM installed.
1. Installed SwitcherApp in CM10.2
2. Reboot into recovery and flashed cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot and gapps-jb-20130813-signed_dualboot
- as you stated it reboots into 1st ROM and makes CM10.2 2nd
3. Rebooted into Download Mode
3. Used Odin 3.09 to install I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME.tar.md5
4. Rebooting now.... :fingers-crossed: I think it did not work. Looking at the Samsung glowing logo for some time now.
* This way i dit not remove files from /system so that could be the problem?
#FeelsLikeAlmostThere

ZeroZorro said:
Thanks again for helping me/us...great!
Started with:
Rooted S4Active with cm-10.2-20131227-UNOFFICIAL-jactiveltexx, gapps-jb-20130813-signed and CWM installed.
1. Installed SwitcherApp in CM10.2
2. Reboot into recovery and flashed cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot and gapps-jb-20130813-signed_dualboot
- as you stated it reboots into 1st ROM and makes CM10.2 2nd
3. Rebooted into Download Mode
3. Used Odin 3.09 to install I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME.tar.md5
4. Rebooting now.... :fingers-crossed: I think it did not work. Looking at the Samsung glowing logo for some time now.
* This way i dit not remove files from /system so that could be the problem?
#FeelsLikeAlmostThere
Click to expand...
Click to collapse
No, this way Odin will flash Sammy Rom and everything will be gone.
Now, after you flashed Sammy successfully, flash cwm recovery, root, delete some bloat and then (!) work down the list in OP
Then it will work. Without offense, you need to read more careful
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app

ohwarumbloss said:
No, this way Odin will flash Sammy Rom and everything will be gone.
Now, after you flashed Sammy successfully, flash cwm recovery, root, delete some bloat and then (!) work down the list in OP
Then it will work. Without offense, you need to read more careful
Greetings
Thomas
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
Yup... indeed, found that out but i think i can use my Nandroid of CM10.2 once everything is set. :silly::cyclops:

ZeroZorro said:
Yup... indeed, found that out but i think i can use my Nandroid of CM10.2 once everything is set. :silly::cyclops:
Click to expand...
Click to collapse
Yes, of course but you could even try the procedure right now
Sent from my GT-I9295 using xda app-developers app

ohwarumbloss said:
Yes, of course but you could even try the procedure right now
Sent from my GT-I9295 using xda app-developers app
Click to expand...
Click to collapse
LOL i think that won't work cause i put it on my Ext-SD so i first have to install the right CWM to access my Nandroid
But i will be fine, serious
I am just waiting for my apps to re-install...so i wondered...when i have 2 roms/dualboot, will the Samsung Update show me an update in the stock rom? So, like kitkat is coming next month? #ProbablyNot

Well... Back to single boot CM10.2 for now...
Didn't work out for me but I'll be back for a 2nd attempt soon.
Meanwhile: SammyStock won't update in dual boot setup (obvious)
Had to disable Knox along the way to be able to install some apps that required root privileges.
Sent from my GT-I9295 using Tapatalk 2

Before getting in the same mess as before:Using Nandroid restore will destroy the dualboot setup?
So titaniumbackup-restore is the way to go?
I am preparing a flasable zip of the latset firmware but i am not 100% sure it is working (still have some reading to do :laugh
Please correct me if i am wrong:
Stock-SammyROM (latest firmware: I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME )
1. Root with Odin
2. CWM-recovery with Odin
3. Enable Developer-mode
4. Disable Knox
5. Enable USB-debugging
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?)
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data

ZeroZorro said:
Before getting in the same mess as before:Using Nandroid restore will destroy the dualboot setup?
So titaniumbackup-restore is the way to go?
I am preparing a flasable zip of the latset firmware but i am not 100% sure it is working (still have some reading to do :laugh
Please correct me if i am wrong:
Stock-SammyROM (latest firmware: I9295XXUBML3_I9295PHNBML2_I9295XXUBML3_HOME )
1. Root with Odin
2. CWM-recovery with Odin
3. Enable Developer-mode
4. Disable Knox
5. Enable USB-debugging
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?)
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data
Click to expand...
Click to collapse
Yes, you are very close
I´d do it this way :
After a fresh install of your Sammy Stock Rom, let it set up. Then, turn of Device and restart into Download Mode
1. Root with Odin Flash this recovery with Odin
2. CWM-recovery with Odin After flash, Device will reboot, press Vol Up + Home, it will go into recovery
2a. Flash this from Recovery
2b. Reboot Device and Click on the SU App. Let it do it´s job (it will install stuff and disable KNOX)
3. Enable Developer-mode not needed
4. Disable Knox is done by SU App
5. Enable USB-debugging not needed
6. Enable 'Install unverfied apps' and disable Google unverified app install warning
7. (can't find ADB-settings in this ROM?) not there in stock and not needed
8. Install Dual Boot Switcher app
9. Set kernel 1st ROM as primary kernel
10. Remove some bloatware
10a. Apps like Google+, Maps, Samsung Bloat are good candidates for this as they are downloadable from store later or not needed at all
11. Reboot into recovery and flash patched zip files (CM10.2 + GAPPS)
12. Reboot and install Dual Boot Switcher app in 2nd ROM
13. Install Titanium backup and restore apps+app-data
Yes, there should be no Problems with TB even tho you´ll get warnings about SU. It works.
Good luck

Flashing in Step 1 and 2a the same file? Are you sure?
Or in Step2a CF-Auto-Root-jflte-jfltexx-gti9295.zip

ZeroZorro said:
Flashing in Step 1 and 2a the same file? Are you sure?
Click to expand...
Click to collapse
Of course not, sorry, give me one Minute lol
Edit: This is step 2a http://www.mediafire.com/?b0yud9r9pwq79aw
Sorry I was in a hurry!
Sent from my GT-I9295 using xda app-developers app

ZeroZorro said:
Flashing in Step 1 and 2a the same file? Are you sure?
Or in Step2a CF-Auto-Root-jflte-jfltexx-gti9509.zip
Click to expand...
Click to collapse
I've corrected the link above now, too
Sent from my GT-I9295 using xda app-developers app

Step 11 now...almost there...
Aargh... when trying to install the patched zip CM10.2 i get a Status 7 error
Went back and flashed CWM 6.0.4.5
But again...
------
NOT INSTALLING AS PRIMARY
symlink: some symlinks failed
E:Error in /data/media/0/Download/cm-10.2-20131227-UNOFFICIAL-jactiveltexx_dualboot.zip
(Status 7)
Installation aborted
-----
Any clue?
EDIT: Installing CMW 6.0.4.8 did the trick for me

[CM12S & CM12.1] Kali NetHunter For Lollipop

Kali Nethunter for OnePlus One Lollipop Roms
recently I ported and build with kali linux the lollipop kernels for my Oneplus one
Cyanogen OS 12S (5.0.2) (YNG1TAS0YL)
Instructions
1) download the cm12s kernel & the rootfs files
2) reboot to recovery
3) flash the rootfs zip first (should take 30 minutes)
4) flash the cm12s kernel second
5) wipe Dalvik & Chache
6) reboot and wait
Do Not Flash it on latest Cm12.1 nightlys it's not working anymore
Downloads
Mod Edit: links removed
Multirom not Supported Yet !!!!
Thanks to:
Offensive Security - Kali Linux NetHunter
anarkia1976(ak) - AK-Kernel
Binky Bear - Patches
Screenshots
View attachment 3267779 View attachment 3267780 View attachment 3267781 View attachment 3267782View attachment 3267787

Would this work with multiroom?

yep
I think it works I tried cm12.1 with multirom

Shapi300 said:
I think it works I tried cm12.1 with multirom
Click to expand...
Click to collapse
I tried and it didn't work for me.

This is awesome, been waiting for lollipop nethunter, Thank you!

download link not working
Tried to download rootfs for 5.0.2. It's not working

Try download on PC I think there's bug in a mobile version

I used nethunter cm11s for a while. Worked great but touch sensibility was definitely worse than plain cm11s or any other rom I've tried.
Is it still the same for nethunter cm12?
Its not that it is a huge problem but I find it annoying the need to swipe several times for something to work. Like unlocking the screen. Just to be clear, touch works much better with cm12 so this isn't the usual hardware issue with touch. I still have the casual ghost swipe but that's like once a day or something, doesn't bother the slightest.
Sent from my A0001 using XDA Free mobile app

cm12 nethunter encrypted phone
I am trying to update my encrypted OPO to CM12s. I have the latest TWRP, SuperSU and 05Q. I tried flashing CM12 YNG1TASOYL-signed-bacon.zip and fastbooting the CM11S 05Q files (.mbn, .img .bin) Both methods ended with a bootloop of the TWRP logo. Before I start again, I want to be sure that this method will work with an encrypted phone.

It does not work on 12.1

Finally Kali for lollipop.. But will try when it will be compatible to multirom..but thanks dev for this..!!
Sent from my A0001 using xda app-developers app

Very Clean Job!
Followed steps, and installed as described! keep up the good work and Thank you for this awesome port.

Shapi300 said:
Try download on PC I think there's bug in a mobile version
Click to expand...
Click to collapse
Gdrive link worked fine. Let me take the backup. Then, i'll flash it.

manish1ly said:
Gdrive link worked fine. Let me take the backup. Then, i'll flash it.
Click to expand...
Click to collapse
Flashed successful. Camera is forced closing...

Also get that the camera forced closing, any fix for this?

I tried on a CM 5.1 rom and it wouldn't boot, also getting the camera bug in CM12s. OP any recommendations as to what specific CM 12.1 Rom works or are you building them yourself? Curious if the camera works in CM12.1 vs CM12s

Stuck at boot
Everything went smoothly during the flash.
The last step mentions to reboot and wait, which I did.
Now my phone is at the boot screen of OnePlus One and nothing is happening.
How long should I wait? Thank you.

Thanks
Hello, thank you for your Kali Nethunter for OnePlus One Lollipop Roms. Installing!

6uRu0fSh1Va said:
Everything went smoothly during the flash.
The last step mentions to reboot and wait, which I did.
Now my phone is at the boot screen of OnePlus One and nothing is happening.
How long should I wait? Thank you.
Click to expand...
Click to collapse
These are the steps that worked for me, both cm-12.0-YNG1TAS0YL-bacon-signed and cm-12.0-YNG1TAS17L-bacon-signed work, but both give camera fcs.
1. flash cm12s rom, boot to desktop
2. reboot to recovery flash rootfs (takes about 15 mins)
3. flash nethunter kernel
4. wipe dalvik and cache
5. reboot
I used team win recovery.
I would say the boot process takes 3-5 minutes on first boot.

what does this do?

[ROM] 100% Stock - G920T_PD1_Stock_DeOdexed_ROM

Download:
- G920T_PD1_Stock_DeOdexed_ROM.zip
- G920T_PD1_Stock_DeOdexed_Debloated_ROM.zip (removed Google apps and a few Samsung apps)
Instructions:
1. Update to Official Tmo PD1 6.0 using this: http://forum.xda-developers.com/tmo...20t-android-6-0-1-marshmallow-update-t3356838
2. Download then Flash this version of TWRP via Odin: twrp-3.0.2-1-zeroflte.tar.md5
3. Place the ROM and the latest [BETA][2016.03.30] SuperSU.zip onto your device.
4. Flash the ROM with TWRP then immediately flash the SuperSu.zip (use system-less mode only) and reboot.
5. Once complete the ROM will pause on the T-Mobile splash screen for 10 - 15 mins before completely booting.
6. Done!
Notes:
1. The ROM will automatically wipe System and User Data for a clean install.
2. The ROM uses the stock PD1 kernel with Chainfire's sepolicy patch.
3. Flash SuperSu in "system-less" mode only. The ROM will bootloop if you flash SuperSu in "system" mode.

Cant wait
Sent from my SM-G920T using XDA-Developers mobile app

General_Mayhem said:
Cant wait
Sent from my SM-G920T using XDA-Developers mobile app
Click to expand...
Click to collapse
The link is now live. Enjoy!

muniz_ri said:
The link is now live. Enjoy!
Click to expand...
Click to collapse
Anyway to maybe remove the data wipe? or add two versions? System wipe makes sense obviously lol unless there's no way this would work over stock rooted lollipop

muniz_ri said:
Download:
G920T_PD1_Stock_DeOdexed_ROM.zip
Instructions:
1. Update to Official Tmo PD1 6.0 using this: http://forum.xda-developers.com/tmo...20t-android-6-0-1-marshmallow-update-t3356838
2. Download then Flash this version of TWRP via Odin: twrp-3.0.2-1-zeroflte.tar.md5
3. Place the ROM and the latest [BETA][2016.03.30] SuperSU.zip onto your device.
4. Flash the ROM with TWRP then immediately flash the SuperSu.zip and reboot.
5. Once complete the ROM will pause on the T-Mobile splash screen for 10 - 15 mins before completing booting.
6. Done!
Notes:
1. The ROM will automatically wipe System and User Data for a clean install.
2. The ROM uses the stock PD1 kernel with Chainfire's sepolicy patch.
Click to expand...
Click to collapse
May I ask what you used to Deodex? I have also Deodexed my device, but had to brutally debloat it. Settings.apk didn't function correctly, syscope, smartcardmanager and a couple of others forced closed repeatedly.. I'll take a look at this, but wondering what you used to Deodex this..

Zaphodspeaks said:
May I ask what you used to Deodex? I have also Deodexed my device, but had to brutally debloat it. Settings.apk didn't function correctly, syscope, smartcardmanager and a couple of others forced closed repeatedly.. I'll take a look at this, but wondering what you used to Deodex this..
Click to expand...
Click to collapse
Yes, I used this tool: http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025
I tried SuperR's Kitchen with no luck. Surprisingly, SVADEV's tool seemed to handle the job in a smarter way at least for this build.

muniz_ri said:
Yes, I used this tool: http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025
I tried SuperR's Kitchen with no luck. Suprisingly, SVADEV's tool seemed to handle the job in a smarter way at least for this build.
Click to expand...
Click to collapse
Super R was the first thing I tried.. In the Tools folder he has old and new oatdex files.. I tried both with little success.. I had to brutally debloat and lost my finger print scanner.. Setting.apk would force close on security settings..
Thanks for the link.. I'll take a look at it..
I don't have the time to flash the ROM, but I'll install it later on tonite..
Edit: you could copy the oat2dex file from that Deodexer script to Super R, in the Tool/Smali directory.. that should allow proper deodexing in Super R..

anaveragehuman said:
Does this ROM break encryption? Thanks!
Click to expand...
Click to collapse
My guess is that it will break encryption since the zip wipes data (data partition is encrypted)...but if it doesn't, who knows if the phone will boot. You will need a usb-otg to flash from since twrp wont be able to read the SD card partition.
I do know that I could not encrypt my phone with the patched kernel, I had to use the stock kernel. Once encrypted, I was able to flash super su to root the phone, but twrp was all kinds of red because it could not mount the data partition. Since it won't mount, you don't have a way to "nandroid backup" your phone.
Flashfire might be the solution for backing up encrypted phones, I made 2 backups with flashfire, though I haven't tried to restore. I think flashfire works with the encryption because it does not reboot until after its done, and it seems the phone is decrypted when it runs.
Sent from my SM-G925T using Tapatalk

Did a complete wipe, already had the updated bootloader and was previously on Stock 6.01. Did a total wipe in TWRP, flashed the ROM, wiped Dalvik/Art and Cache again to be sure.. Then rebooted.. Sitting on 20 mins and no boot... Stuck in a bootloop..

I got a boot loop when i flashed TWRP

anaveragehuman said:
I could have sworn TWRP had a way to mount encrypted partitions now. Did it ask you for a password when you entered TWRP?
Click to expand...
Click to collapse
it does not

yerimil said:
I got a boot loop when i flashed TWRP
Click to expand...
Click to collapse
Follow directions.

muniz_ri said:
Follow directions.
Click to expand...
Click to collapse
well i did... step 2 say flash TWRP.. step 3 then says download and then place rom on your phone. how can i place it if im in a boot loop.. im just following it in order bruh..

yerimil said:
well i did... step 2 say flash TWRP.. step 3 then says download and then place rom on your phone. how can i place it if im in a boot loop.. im just following it in order bruh..
Click to expand...
Click to collapse
The instructions tell you to use and links to a specific version of TWRP, yet you somehow missed that.
You stated in this post that you used Twrp 3.0 and only used the Twrp version linked in the instructions after you bootlooped, smh: http://forum.xda-developers.com/tmo...stuck-loop-t3360447/post66404317#post66404317

@muniz_ri hey mate good deblaoted rom do u by any chance have a flashable to return the volte files for tmobile thanks in advance

genuine55 said:
@muniz_ri hey mate good deblaoted rom do u by any chance have a flashable to return the volte files for tmobile thanks in advance
Click to expand...
Click to collapse
Thanks but I didn't realize that I removed volte. Can you see if it works with the non-debloated version?
Sent from my SM-G920T using XDA-Developers mobile app

muniz_ri said:
Thanks but I didn't realize that I removed volte. Can you see if it works with the non-debloated version?
Sent from my SM-G920T using XDA-Developers mobile app
Click to expand...
Click to collapse
I will check in a few and report back
Sent from my SM-G920T using Tapatalk

[Help] Need a fast and bug free daily driver ROM

I'm on CM13/RR from 7-8 months now. Still facing bugs like Hotspot bug which causes apps like share-it to not work properly.
So I need a bug free and fast ROM. I'm thinking about getting back to stock ROM or flashing CM11 snapshot. What do you recommend guys?
1. CM11 Snapshot
2. Stock MM (How to?)
3. Anything else ?

Flash flume 5.1.1R beta
---------- Post added at 05:50 PM ---------- Previous post was at 05:49 PM ----------
satish111 said:
Flash flume 5.1.1R beta
Click to expand...
Click to collapse
Sorry flyme Os

sumeet240 said:
I'm on CM13/RR from 7-8 months now. Still facing bugs like Hotspot bug which causes apps like share-it to not work properly.
So I need a bug free and fast ROM. I'm thinking about getting back to stock ROM or flashing CM11 snapshot. What do you recommend guys?
1. CM11 Snapshot
2. Stock MM (How to?)
3. Anything else ?
Click to expand...
Click to collapse
STOCK MM for me HAHAHA!
It's stable AF, been using STOCK MM from a month now.
If you want customizations, just flash xposed and use modules like gravity box / AndroidN-ify.
Use a custom kernel like Zeus / TZ for better battery.
That's it.
On a note flashing Stock MM Isn't difficult, just get the zip [Look below for links, choose according to your device Ie; sprout4 / sprout8] and reboot recovery [Twrp by 1cefire Recommended] performa a full wipe [ ie; advanced wipe > wipe system/ cache /dalvik] wipe everything except SD CARD .
Once the wiping process done, go back to the TWRP menu and install STOCK Rom zip, give it some time it'll take few minutes for installation, next reboot.
If you wanna retain twrp, then make sure to uncheck 'Mount system readonly' from twrp mount settings menu.
Or just flash a custom kernel followed by super su zip, then you're good to go!
Links >
Stock MOB31E Sprout4 Rom - AFH || Mirror2 [Google_drive]
Stock MOB31E Sprout8 Rom - AFH || Mirror2 [Google_drive]
Click to expand...
Click to collapse

sumeet240 said:
I'm on CM13/RR from 7-8 months now. Still facing bugs like Hotspot bug which causes apps like share-it to not work properly.
So I need a bug free and fast ROM. I'm thinking about getting back to stock ROM or flashing CM11 snapshot. What do you recommend guys?
1. CM11 Snapshot
2. Stock MM (How to?)
3. Anything else ?
Click to expand...
Click to collapse
sachin n said:
STOCK MM for me HAHAHA!
It's stable AF, been using STOCK MM from a month now.
If you want customizations, just flash xposed and use modules like gravity box / AndroidN-ify.
Use a custom kernel like Zeus / TZ for better battery.
That's it.
On a note flashing Stock MM Isn't difficult, just get the zip [Look below for links, choose according to your device Ie; sprout4 / sprout8] and reboot recovery [Twrp by 1cefire Recommended] performa a full wipe [ ie; advanced wipe > wipe system/ cache /dalvik] wipe everything except SD CARD .
Once the wiping process done, go back to the TWRP menu and install STOCK Rom zip, give it some time it'll take few minutes for installation, next reboot.
If you wanna retain twrp, then make sure to uncheck 'Mount system readonly' from twrp mount settings menu.
Or just flash a custom kernel followed by super su zip, then you're good to go!
Links >
Click to expand...
Click to collapse
Right go for stock. I am also using it from a month now. You know bug free life. Procedure already mentioned by sachin n sir. Just download zip and flash with custom recovery. Or use sp flash tools. I however preferred twrp for flashing. And I'm waiting for miracle from Google to give us official n update notification.
P.S. Soon.

Thanks bro. I did exactly same thing. You are awesome. Do you think our device will get any further updates ?

sumeet240 said:
Thanks bro. I did exactly same thing. You are awesome. Do you think our device will get any further updates ?
Click to expand...
Click to collapse
There is no news atm.
Infact we ain't got OCTOBER patch...
Let's see..
I think Google dropped support for sprout!

sachin n said:
There is no news atm.
Infact we ain't got OCTOBER patch...
Let's see..
I think Google dropped support for sprout!
Click to expand...
Click to collapse
Condition is more worse with second gen device LAVA PIXEL V1
September patch arrived in October
GOOGLE LOVES Qualcomm

Let's hope CM14 will be better.

Resurrection Remix vs Stock ROM ?

[Rom] [Ufirm_QE2_Hybrid_Nougat_Rom_FlashFire_Install][Status Official For All]

Latest Ufirm QE2 Nougat Firmware For The S7 Edge Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up​
Files To Download
Odin.zip
ADB_Root_G935U_QE2Files.zip
Mega Mirror Link
UFIRM_G935_Odin_Firmware.zip
Mega Mirror Link
FlashFire_Flashable_G935UFirmware.zip
Mega Mirror Link
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G935_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G935_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G935U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G935UFirmware.zip
7. Copy AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 to internal storage of your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip to internal storage of your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source

I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage

You are a big @jrkruse and I love what you build I will install it in a couple of hours I will return thanks
Sent from my SM-G935T using XDA-Developers Legacy app

Can there will be a stock android custom rom?
---------- Post added at 08:23 AM ---------- Previous post was at 08:22 AM ----------
Thanks for your work ?

Hey man! Awesome that you've got a ufirm rom thread here too.. now I don't have to go to the verizon forums

umaro said:
Hey man! Awesome that you've got a ufirm rom thread here too.. now I don't have to go to the verizon forums
Click to expand...
Click to collapse
I just updated all the OP's of the Ufirms I forgot to give you a shoutout for your work. Thanks again I am sure Tmobile and ATT people will agree. Even gave the Flat Tmobile and ATT some new roms to play with

Gohar___Nadeem said:
Can there will be a stock android custom rom?
---------- Post added at 08:23 AM ---------- Previous post was at 08:22 AM ----------
Thanks for your work
Click to expand...
Click to collapse
Not sure what your asking. But yes there is a custom stock tmobile rom as well

Sorry for my bad english....
I'm asking that!
Like lineage Os ,resurrection remix any of that kind rom will be available for t-mobile in future?

Gohar___Nadeem said:
Sorry for my bad english....
I'm asking that!
Like lineage Os ,resurrection remix any of that kind rom will be available for t-mobile in future?
Click to expand...
Click to collapse
Probably not

I've tried to install twice so far. Both times I make it as far as Aroma installer getting to "Wiping Data" then phone reboots to Splash screen and just sits. Doesn't make it to boot animation. Tried rebooting, then booting to recovery and wiping cache, then tried factory reset, but nothing helped.
Are there any things I should avoid in Aroma options?

radoo7701 said:
I've tried to install twice so far. Both times I make it as far as Aroma installer getting to "Wiping Data" then phone reboots to Splash screen and just sits. Doesn't make it to boot animation. Tried rebooting, then booting to recovery and wiping cache, then tried factory reset, but nothing helped.
Are there any things I should avoid in Aroma options?
Click to expand...
Click to collapse
Did you flash the Verizon Odin files first. Then root. The flashfire AP and Rom zip

jrkruse said:
Did you flash the Verizon Odin files first. Then root. The flashfire AP and Rom zip
Click to expand...
Click to collapse
Yup, I did everything exactly as listed. Since there was no directions for Aroma, I was wondering if I was picking a wrong option there. I choose full wipe, TMo stock kernel, modded ui, but it always fails at Wipe when it starts to install.

radoo7701 said:
Yup, I did everything exactly as listed. Since there was no directions for Aroma, I was wondering if I was picking a wrong option there. I choose full wipe, TMo stock kernel, modded ui, but it always fails at Wipe when it starts to install.
Click to expand...
Click to collapse
So you never get through aroma installer?

jrkruse said:
So you never get through aroma installer?
Click to expand...
Click to collapse
I get thru the options, then hit install. Installer starts at Wipe, the my phone just reboots to Splash screen the nothing. 3rd try I picked No Wipe and still same thing.
Downloading TMobile version to try that one tomorrow.

radoo7701 said:
I get thru the options, then hit install. Installer starts at Wipe, the my phone just reboots to Splash screen the nothing. 3rd try I picked No Wipe and still same thing.
Downloading TMobile version to try that one tomorrow.
Click to expand...
Click to collapse
Are you choosing to mount system when you choose the rom zip with flashfire

jrkruse said:
Are you choosing to mount system when you choose the rom zip with flashfire
Click to expand...
Click to collapse
Yup. To the best of my knowledge I've followed every step exactly. It may be possible I have a bad download. My internet has been acting up. I'll try again later after I talk with my service provider tomorrow. Thanks

radoo7701 said:
Yup. To the best of my knowledge I've followed every step exactly. It may be possible I have a bad download. My internet has been acting up. I'll try again later after I talk with my service provider tomorrow. Thanks
Click to expand...
Click to collapse
Could you tell me each mod you chose so I can see if I can recreate the problem. Also is te AP and zip on your phone storage or sdcard
Edit:Also ceck the md5 of your download

jrkruse said:
Could you tell me each mod you chose so I can see if I can recreate the problem. Also is te AP and zip on your phone storage or sdcard
Click to expand...
Click to collapse
I picked full wipe, TMo stock kernel, modded ui, NoName boot animation. Most of the S8 apps and custom debloat. I tried the dual speaker mod the first 2 times but not the 3rd.
Both files are on my sdcard.

radoo7701 said:
I picked full wipe, TMo stock kernel, modded ui, NoName boot animation. Most of the S8 apps and custom debloat. I tried the dual speaker mod the first 2 times but not the 3rd.
Both files are on my sdcard.
Click to expand...
Click to collapse
Do you remember what you chose in custom debloat. I just want to run your same config and try. I would check that md5 use and md5 checker program then check it against Android file host generated md5 for file. If its bad there is no need in doing all this

jrkruse said:
Do you remember what you chose in custom debloat. I just want to run your same config and try. I would check that md5 use and md5 checker program then check it against Android file host generated md5 for file. If its bad there is no need in doing all this
Click to expand...
Click to collapse
I don't remember exactly. One of the times I just chose the minimal debloat option (70 apps, I think)
Anyway, I'll have to try again tomorrow after work.