Infinix hot 2 X510 Touch Screen Issues - Infinix HOT 2

I was very excited that Android one has come to Africa.
I was constantly searching for its availability in Jumia stores
The sole online seller in Nigeria and after three weeks I got mine
#1 At first boot it couldn't load. Of course, removing the
Battery and putting it back solved the issue. It booted with
Nice boot animation.
Before I go into the touchscreen issues you might want to read this
GOING IN TO RECOVERY, FASTBOOT AND FACTORY MODE.
#A RECOVERY
To enter Recovery
#1 power off the phone
#2 press the volume up and power button together
#3 select boot mode will show in a dark screen. Follow the
Appropriate info on the screen and select recovery. But that's
Not all. Once you select recovery, Infinix will appear on the
Screen and only an empty Android logo will appear on screen
#4 now press and hold the power and volume up button
Together. It will move you into the stock recovery.
The usual normal stock recovery but this one has additional
Root integrity check - which should check if the system
Has been tempered with.
You can also view logs from the recovery and interestingly
You can view the last-kmsg from the recovery.
#B FASTBOOT
You can go into the fastboot mode (bootloader) from
The recovery. But if you are not in the recovery, hard keys
Can take you there too.
#1 press the volume up button Together with the power (for like 5 seconds)
#2 a dark screen with three options will come up
#3 select fastboot mode.
#C FACTORY MODE
#1 Press the power and volume down together for like 5 seconds
You can do some hardware test and other tests with it.
#TOUCHSCREEN TROUBLESHOOTING
IF YOU HAVE THE OPPORTUNITY TO TEST THE PHONE BEFORE
YOU BECAREFUL to check the touchscreen response.
#1 touch the screen from all the edges -
Top-right
Top-centre
Top-left
Bottom-left, middle, right
#2 Check the centre of the the screen and there about
In a white background, be on the lookout for almost an
Invincible horizontal line across the middle areas, if you
See any test how sensitive touch is around it.
#3 if everything seems OK then you should try out a complex
Lock screen pattern. This will confirm that your screen is ok
I've installed two other X510 from the carton, luckily for
Me mine touch screen is ok but the other two I configured
Lags in touch sensitivity in some of the screen areas.
My take is this is a good phone for the price.
2GB Ram and 16GB ROM is really a handful....
Will be updating more....

thanks for this information. looking forward to try it out!

nothing happen when press the volume up and power button together. (infinix x510 android one - indonesia)
any solution

ArticK said:
nothing happen when press the volume up and power button together. (infinix x510 android one - indonesia)
any solution
Click to expand...
Click to collapse
Same here.

anarchtic said:
Same here.
Click to expand...
Click to collapse
Use CPU X app and check the full name of your
Kernel, if it contains [email protected] then know that it's
The same AndroidOne firmware Uploaded by infinix
That was installed by default on Indonesia version.
Google stock firmware contains Google in the kernel
Name

Bolumstar said:
Use CPU X app and check the full name of your
Kernel, if it contains [email protected] then know that it's
The same AndroidOne firmware Uploaded by infinix
That was installed by default on Indonesia version.
Google stock firmware contains Google in the kernel
Name
Click to expand...
Click to collapse
Where I can find google stock firmware, the link please

ArticK said:
nothing happen when press the volume up and power button together. (infinix x510 android one - indonesia)
any solution
Click to expand...
Click to collapse
There's a solution for this, I'll post it tomorrow still
Busy now

My hot 2 lags and its frustrating.

Mine lags also and its frustrating. I have 1GB RAM (2GB version isn't available here). I uninstalled/froze a few apps and use Greenify, both of which seem to reduce lag some. I also installed Nova Launcher (free version) from the Play Store, and it significantly increased scrolling speed. Finally, you might want to check these articles:
https://www.androidpit.com/increase-phone-ram
https://www.androidpit.com/why-is-my-android-device-running-slow
Touch screen: when I scroll down or up and it hits the middle of screen, it absolutely blacks out: a total black screen. When I continue scrolling past this point right in the middle of the screen, the interface returns. Anyone else have this problem?

Related

need help in am ron

Rooting nexus one with cyanogen and am ron.
everything went good until I got to the part about making a backup.got to the green screen and went to scroll down using volume down and the highlighted bar would not move, . shows amron recovery at bottom of screen had to remove battery to get it to reboot into regular mode, any help have cyanogen and add ons on the sd card and ready to go
thanks
Did you read the top of that screen? It says to press Volume Down to return to previous screen. The trackball is what navigates the menu items.

[RECOVERY] ClockworkMod TOUCH 5.5.0.4 v1

Im working on porting gweedo767's touch recovery to the incredible. I do not own an incredible so i need people to give me feedback so i know what to change. Once i get a good working fakeflash i will release an installable recovery image. If anyone wants to donate to me for me to get my own incredible that would be much appreciated and will make the process quicker.
Here is a youtube video I made of how it works: ------> VIDEO
4 ways to use recovery:
volume rockers
soft keys on bottom of screen
capacitive buttons
swipe gestures (up/down = scroll && left = back && right = select)
This will not install ANYTHING on your phone. It is just a test drive to see what it is like. This loads the files into the ram and runs them from there. As soon as you reboot everything will be back to the way it was. This does not change/alter ANY files on your phone.
I need to know what sort of things i need to change like:
swipe sensitivity
font size
order of soft keys on bottom of screen
anything else......
Please let me know how i can make this better
Click to expand...
Click to collapse
Here is the link to a FAKEFLASH: --------> http://sk8erwitskil.com/guest/skyrocket/CWMRT/inc/cwmrt-inc.zip (flash in CWM)
There is a known bug in ClockworkMod 5.5.0.4 that long file names can POSSIBLY cause backups to hang. There is a solution/workaround:
boot into recovery
try to make a backup (no matter if it passes or fails proceed to next step)
either through terminal emulator or through adb run the following command EXACTLY:
Code:
touch /sdcard/clockworkmod/.hidenandroidprogress
NOTICE THE PERIOD AND LACK OF EXTENSION.
and it is .hidenandroidprogress NOT .hideandroidprogress __notice the letter "n"__
Click to expand...
Click to collapse
Hello i tried your recovery and it has a few issues one being major. First off the up scroll button (the one that looks like a house) seems to select items instead of scroll up in the list. Also while on the subject of the buttons imho there a little small, and would look better more rounded, perhaps just putting a ring arround them.
If you swipe to the right on the screen it reboots the phone.
Ok now on to the major issue, it only backed up boot, system, and recovery. It did not back up data, datadata, cache, sd-ext, android.secure, or generate an md5 sum.
Other that that its good. It is not what i was expecting when i tried it. I was expecting to touch on the menu where the options are instead of using softkeys to navigate and select, but i still like this better than having to use vol keys and trackball, great job so far.
cmlusco said:
Hello i tried your recovery and it has a few issues one being major. First off the up scroll button (the one that looks like a house) seems to select items instead of scroll up in the list. Also while on the subject of the buttons imho there a little small, and would look better more rounded, perhaps just putting a ring arround them. Ok now on to the major issue, it only backed up boot, system, and recovery. It did not back up data, datadata, cache, sd-ext, android.secure, or generate an md5 sum. Other that that its good. It is not what i was expecting when i tried it. I was expecting to touch on the menu where the options are instead of using softkeys to navigate and select, but i still like this better than having to use vol keys and trackball, great job so far.
Click to expand...
Click to collapse
It is touch... You swipe to scroll. Swipe your finger up and down to scroll. Swipe right to select and SWIPE LEFT to go back. And thank you for your feedback.
Edit: and also that backup issue is a bug in clockworkmod. You have to put a file call:
.hidenandroidprogress in the /sdcard/clockworkmod/ folder. Notice the period and lack of extension.
Sent from my SAMSUNG-SGH-I727 using XDA App
sk8erwitskil said:
It is touch... You swipe to scroll. Swipe your finger up and down to scroll. Swipe right to select and SWIPE LEFT to go back. And thank you for your feedback.
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Ok i see let me try this again.
Ok now i get it. Lol ok then heres my bug report.
Swipe left and right are way to sensitive. When scrolling up and down if you go just the slightest bit to the left or right, it either goes back or selects an item.
As i said earlier the up softkey selects items instead of moving up in the list.
Also as i said earlier not backing up everything or generating an md5.
Other than that it seems great.
cmlusco said:
Ok now i get it. Lol ok then heres my bug report.
Swipe left and right are way to sensitive. When scrolling up and down if you go just the slightest bit to the left or right, it either goes back or selects an item.
As i said earlier the up softkey selects items instead of moving up in the list.
Also as i said earlier not backing up everything or generating an md5.
Other than that it seems great.
Click to expand...
Click to collapse
i added the fix to the backup problem in the OP. add that file and itll solve that issue. that is a known issue in the base code of clockworkmod 5.x, im working on making a code fix for that. the workaround works fine for now tho. can you tell me what the "home" "menu" "back" & "search" capacitive buttons do in recovery? that way i can re-arrange the soft keys to line up with the corresponding capacitive button.
im guessing back = go back, search = select, but does home = scroll up or scroll down?
thanks
sk8erwitskil said:
i added the fix to the backup problem in the OP. add that file and itll solve that issue. that is a known issue in the base code of clockworkmod 5.x, im working on making a code fix for that. the workaround works fine for now tho. can you tell me what the "home" "menu" "back" & "search" capacitive buttons do in recovery? that way i can re-arrange the soft keys to line up with the corresponding capacitive button.
im guessing back = go back, search = select, but does home = scroll up or scroll down?
thanks
Click to expand...
Click to collapse
Home scrolls down, menu does nothing just vibes, back goes back, search selects. Also the on screen back key seems to select instead of go back like the on screen up key does.
EDIT: actually the menu button seems to go back also. Its hard to tell. I think when hitting home, menu, back, search, it is also picking up my finger slightly moving left or right when i hit it.
Also for the backup fix, that is just creating a file called .hiddenandroidprogress right? That file was already present in my cwm folder before i ever even tried this recovery. I ran the command anyways and tried to back up again but still only boot recovery and system.
cmlusco said:
Home scrolls down, menu does nothing just vibes, back goes back, search selects. Also the on screen back key seems to select instead of go back like the on screen up key does.
EDIT: actually the menu button seems to go back also. Its hard to tell. I think when hitting home, menu, back, search, it is also picking up my finger slightly moving left or right when i hit it.
Click to expand...
Click to collapse
ok i updated the file. the soft keys on screen should be fixed to at least be the right keys. im going to re-arrange the order to those of the capacitive once i get to my work computer tomoro. also, i made the left/right sensitivity lower. see how it works.
cmlusco said:
Also for the backup fix, that is just creating a file called .hiddenandroidprogress right? That file was already present in my cwm folder before i ever even tried this recovery. I ran the command anyways and tried to back up again but still only boot recovery and system.
Click to expand...
Click to collapse
yes .hidenandroidprogress. what it does is stop cwm from enumerating the file list that it is backing up. if it gets stuck after that then i have to go in and debug the filesystem points i have probably as they are wrong for data, etc.
sk8erwitskil said:
ok i updated the file. the soft keys on screen should be fixed to at least be the right keys. im going to re-arrange the order to those of the capacitive once i get to my work computer tomoro. also, i made the left/right sensitivity lower. see how it works.
Click to expand...
Click to collapse
Still to sensitive left to right, and the on screen up key still goes back instead of up in the list.
cmlusco said:
Still to sensitive left to right, and the on screen up key still goes back instead of up in the list.
Click to expand...
Click to collapse
Agreed, havent totally tested though.
Nice having a touch option. Desire has CWmod touch and another one.
Sent from my Droid Incredible using Tapatalk
72ls1 said:
Agreed, havent totally tested though.
Nice having a touch option. Desire has CWmod touch and another one.
Sent from my Droid Incredible using Tapatalk
Click to expand...
Click to collapse
My wifes evo 4g has it too, but its where you touch the words on the screen instead of swiping or using soft or on screen keys.
im updating the base code to fix alot of bug fixes. will update soon
sk8erwitskil said:
im updating the base code to fix alot of bug fixes. will update soon
Click to expand...
Click to collapse
When you make updates, can you provide change log with dates so we know when you updated it.
Thanks
72ls1 said:
When you make updates, can you provide change log with dates so we know when you updated it.
Thanks
Click to expand...
Click to collapse
Yes definitely. I have actually stopped doing anything for now since I'm getting an incredible in a few days so I can do my own testing. It was getting too difficult doing all my testing over the Internet lol. I'll be back with another version in about a week. So until then....
Sent from my SAMSUNG-SGH-I727 using XDA App
sk8erwitskil said:
Yes definitely. I have actually stopped doing anything for now since I'm getting an incredible in a few days so I can do my own testing. It was getting too difficult doing all my testing over the Internet lol. I'll be back with another version in about a week. So until then....
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
cant wait to see what you come up with.
Trying this, may I ask what to do if I don't like this? How would one go back to the regular CWM?
Sent from my HTC Droid Incredible -
Clutch 3.5 - Sense 4.0 Theme
withbloodskies said:
Trying this, may I ask what to do if I don't like this? How would one go back to the regular CWM?
Sent from my HTC Droid Incredible -
Clutch 3.5 - Sense 4.0 Theme
Click to expand...
Click to collapse
Try re flashing from ROM Manager.
withbloodskies said:
Trying this, may I ask what to do if I don't like this? How would one go back to the regular CWM?
Sent from my HTC Droid Incredible -
Clutch 3.5 - Sense 4.0 Theme
Click to expand...
Click to collapse
This is only a bootable test, it changes nothing on your phone. You flash this it temp boots to the touch recovery, and then when you exit the touch recovery you will be exactly the way it was before flashing it. It is not permanent.

How do I take a screen shot of an open program?

so, I haven't rooted yet, and am trying to take screen shots of some open programs. I know you are supposed to either hold the power button and volume down together, but its impossible with my fat fingers to do that properly; I also saw that holding home and power is supposed to work, but that doesn't either.
Also, the quick memo program, which supposedly does that too, doesn't do it; when I invoke that, I just get a blank, yellow page to show up, not the open screen of the open program..
Am I missing something?
thanks!
wase4711 said:
so, I haven't rooted yet, and am trying to take screen shots of some open programs. I know you are supposed to either hold the power button and volume down together, but its impossible with my fat fingers to do that properly; I also saw that holding home and power is supposed to work, but that doesn't either.
Also, the quick memo program, which supposedly does that too, doesn't do it; when I invoke that, I just get a blank, yellow page to show up, not the open screen of the open program..
Am I missing something?
thanks!
Click to expand...
Click to collapse
I have big hands too. Try pushing the middle area between the Vol down and Power with one finger. Just a pretty quick push. Works for me your results may vary.
thanks man, it took a few tries but I got it to work! :good::good:
sn707 said:
I have big hands too. Try pushing the middle area between the Vol down and Power with one finger. Just a pretty quick push. Works for me your results may vary.
Click to expand...
Click to collapse
it make me so mad every time i try the volume go down it was more easy with the buttons on the side, i just use the QuicMemo on the top settings screen then i click save to galery
if you are rooted, there are some programs in the market that will help...
Apps for taking screenshots
Apps are available in Google Play Store, that allow to take screenshots of your phone's screen.
With root, Install Xposed framework- gravity box. Then enable screenshot option on power menu.
Sent from my LG-D959 using XDA Premium 4 mobile app
Try "Screenshot Ultimate" from "Ice Col Apps"

[Q] soft keys have progressively failed

My soft keys have all seemed to fail and not responding to touch. It started with the back button and then I went into settings and rearranged the buttons and all was good for about a week. Now the home and menu buttons are not responsive or you have to tap like 20 times until it registers. I haven't dropped the phone or got it wet and I have the quick window case on it. Anyone else experience this issue? Is it fixable or is my digitizer most likely going bad? As of right now, the only option I have is to use the phone in landscape mode with the buttons on the left side of the screen. I will most likely reinstall factory recovery, unroot, save all of my music and pics and then factory reset. I even have the issue when booted into TWRP which leads me to believe that the digitizer is going bad.
lostsoul77 said:
My soft keys have all seemed to fail and not responding to touch. It started with the back button and then I went into settings and rearranged the buttons and all was good for about a week. Now the home and menu buttons are not responsive or you have to tap like 20 times until it registers. I haven't dropped the phone or got it wet and I have the quick window case on it. Anyone else experience this issue? Is it fixable or is my digitizer most likely going bad? As of right now, the only option I have is to use the phone in landscape mode with the buttons on the left side of the screen. I will most likely reinstall factory recovery, unroot, save all of my music and pics and then factory reset. I even have the issue when booted into TWRP which leads me to believe that the digitizer is going bad.
Click to expand...
Click to collapse
Sounds like DEFINITELY a digitizer problem. The fact that it still does it in TWRP really proves that IMO
Sent from my LG-D950 using XDA Premium 4 mobile app
Try going to your hidden settings menu thru the phone's dial pad. How? - just dial 3845#*???# replace the "???" With whichever variant yours is. I'm T-Mobile so mine is the D959 so I use 3845#*959# … you don't have to hit send or do anything … it will automatically open up a menu list. In this list you will see a "Settings" option. Click it. Then in the next window, scroll down it's list towards the bottom and you'll see an option for "Update Touch Firmware". Select it. … you're phone will be froze and unresponsive for about 5 -10 seconds. Once it becomes responsive again just exit via the "back" key or "home" key or however you want. You won't see anything happen or anything change or notifying you that its updating or that it finished/or worked. It just does. Not sure if this will help you , but it heps fix mine when the knock to wake stops working. Just a idea give it a shot. It won't hurt anything. And don't mess with anything else in that hidden menu if you're not sure what your default setting is or know what it does. You can really mess it up in there. Good luck.
mattwheat said:
Try going to your hidden settings menu thru the phone's dial pad. How? - just dial 3845#*???# replace the "???" With whichever variant yours is. I'm T-Mobile so mine is the D959 so I use 3845#*959# … you don't have to hit send or do anything … it will automatically open up a menu list. In this list you will see a "Settings" option. Click it. Then in the next window, scroll down it's list towards the bottom and you'll see an option for "Update Touch Firmware". Select it. … you're phone will be froze and unresponsive for about 5 -10 seconds. Once it becomes responsive again just exit via the "back" key or "home" key or however you want. You won't see anything happen or anything change or notifying you that its updating or that it finished/or worked. It just does. Not sure if this will help you , but it heps fix mine when the knock to wake stops working. Just a idea give it a shot. It won't hurt anything. And don't mess with anything else in that hidden menu if you're not sure what your default setting is or know what it does. You can really mess it up in there. Good luck.
Click to expand...
Click to collapse
I gave that a shot and nothing happens after dialing the code; i'm on the sprint version. Was going to try flashing back to stock and see if that helps; trying to find the thread to do so and to download the .tot files.
http://forum.xda-developers.com/showthread.php?t=2644083
Flash back to stock thread
mattwheat said:
http://forum.xda-developers.com/showthread.php?t=2644083
Flash back to stock thread
Click to expand...
Click to collapse
I flashed back to stock and upgraded to KK. The button problem sorta went away; acts funny in some apps to where home or menu won't respond and takes a few taps for back button to register. I found the correct way to access the hidden menu for the sprint variant and screen test is showing a dead area when doing the drawing test:
The Secret code to access hidden menu on LG G Flex LS995 is different.
Dial 5689#*995# , You will access the hidden menu on G Flex.
How to Troubleshoot Problems Using the hidden menu on LG G Flex (LS995).
1. Dialer 5689#*995# ->
2. Select Device Test ->
3. Press Power Button & Select AATFULL(+power key) ->
4. Select All Auto Test – Full.
lostsoul77 said:
I flashed back to stock and upgraded to KK. The button problem sorta went away; acts funny in some apps to where home or menu won't respond and takes a few taps for back button to register. I found the correct way to access the hidden menu for the sprint variant and screen test is showing a dead area when doing the drawing test:
The Secret code to access hidden menu on LG G Flex LS995 is different.
Dial 5689#*995# , You will access the hidden menu on G Flex.
How to Troubleshoot Problems Using the hidden menu on LG G Flex (LS995).
1. Dialer 5689#*995# ->
2. Select Device Test ->
3. Press Power Button & Select AATFULL(+power key) ->
4. Select All Auto Test – Full.
Click to expand...
Click to collapse
That's what I meant when I posted
3845#*???# and replace the "???" With your variant number.
mattwheat said:
That's what I meant when I posted
3845#*???# and replace the "???" With your variant number.
Click to expand...
Click to collapse
I understood what you meant but that 3845 code doesn't work with the Sprint variant...have to use 5689....

Home button single press not working sometimes

Since I recently switched to a Galaxy S10+, I donated my Mi A2 to my girlfriend. After I fully wiped my phone, she installed it like any other new phone and finished the wizard. All her apps got reinstalled nicely and everything looked nice.
But now the home button (3 button nav) sometimes just stops responding to a single press. When I hold the button I do get the Google Assistant as expected, but single press doesn't take me to the home screen. After a reboot everything is back to normal, but only for a while. The button does show the colored dots when I press it.
What could be wrong? It looks a bit like some process is blocking it to prevent exiting a wizard or something (I had it once on a Pixal tablet, which thought I had the setup wizard open), but the back button does work as expected and I can navigate using different methods.
amelsfort said:
Since I recently switched to a Galaxy S10+, I donated my Mi A2 to my girlfriend. After I fully wiped my phone, she installed it like any other new phone and finished the wizard. All her apps got reinstalled nicely and everything looked nice.
But now the home button (3 button nav) sometimes just stops responding to a single press. When I hold the button I do get the Google Assistant as expected, but single press doesn't take me to the home screen. After a reboot everything is back to normal, but only for a while. The button does show the colored dots when I press it.
What could be wrong? It looks a bit like some process is blocking it to prevent exiting a wizard or something (I had it once on a Pixal tablet, which thought I had the setup wizard open), but the back button does work as expected and I can navigate using different methods.
Click to expand...
Click to collapse
you need to.provide more info to get the right answer ..just use full screen navigation ...in settings try reassigning it different actions to see what happens ...but sounds like the delay between single press / long press for assistant is what is screwing you ...i disabled long press for assistant cos it kept giving me the assistant when i was trying to get home ....
but still.hard to say since you have 0 info about your problem here
The problem is that I don't have much more information as well. It's hard to reproduce the issue. We tried pinning and unpinning an app, opening different apps, changing the gestures, but nothing seems to trigger the issue.
I also tried gesture navigation, but that doesn't have a gesture for going directly back home. Also I think it's not possible to reassign the buttons on stock rom.
When I used the phone I never had this issue.
amelsfort said:
The problem is that I don't have much more information as well. It's hard to reproduce the issue. We tried pinning and unpinning an app, opening different apps, changing the gestures, but nothing seems to trigger the issue.
I also tried gesture navigation, but that doesn't have a gesture for going directly back home. Also I think it's not possible to reassign the buttons on stock rom.
When I used the phone I never had this issue.
Click to expand...
Click to collapse
on my phone if i swipe up from bottom i go straight home ... by more info i mean
1. device/rom/version/root status/ launcher/ ...stuff like that
2.relevant fixes you tried ...
3. short video of when it happens
anyway .. i don't understand because you can choose what actions you want to happen in relation to the gestures ..so if you wanna go home in one shot assign that action to a specific gesture
have you ACTUALLY tried my fix of disabling google assistant ..so you don't trigger assistant or freeze by holding home button too long ..
try assigning double tap on home to go home ..as a workaround
The phone has no customizations at all: stock rom (Android One), no root, default Xiaomi launcher.
Version: Android 10, march security update (up to date according to Xiaomi)
With the gestures I can choose between:
- navigation using gestures
- navigation using 2 buttons (this is selected)
- navigation using 3 buttons
I have tried the first option. Swiping up does indeed go to the home screen when I'm in an app. But not to my default screen. Like when I swiped right to a different home screen page, it doesn't return to the first one.
I will try disabling opening the Assistant using the home button.
amelsfort said:
The phone has no customizations at all: stock rom (Android One), no root, default Xiaomi launcher.
Version: Android 10, march security update (up to date according to Xiaomi)
With the gestures I can choose between:
- navigation using gestures
- navigation using 2 buttons (this is selected)
- navigation using 3 buttons
I have tried the first option. Swiping up does indeed go to the home screen when I'm in an app. But not to my default screen. Like when I swiped right to a different home screen page, it doesn't return to the first one.
I will try disabling opening the Assistant using the home button.
Click to expand...
Click to collapse
you should downgrade to pie because in 10 many people have lag , ui feezing and later on random reboots.. i think you will find in a month or two the UI will freeze up ..like what is happening now may be a "mini" freeze
pie is stable.. im on miui 12 official pie for wayne and wow am glad i dithed android1 and gave up my obsession of having 10 ..
I just upgraded because Xiaomi pushed the upgrade. And my girlfriend doesn't know how to downgrade.
Besides, I have been using the same phone with the same Android version for a few months without any issues. It's only since she started using it. That's why I was thinking about some wizard/setup preventing the use of the home button, which we had a few years ago on a tablet. But that was blocking more buttons then, so not exactly the same.
amelsfort said:
I just upgraded because Xiaomi pushed the upgrade. And my girlfriend doesn't know how to downgrade.
Besides, I have been using the same phone with the same Android version for a few months without any issues. It's only since she started using it. That's why I was thinking about some wizard/setup preventing the use of the home button, which we had a few years ago on a tablet. But that was blocking more buttons then, so not exactly the same.
Click to expand...
Click to collapse
ok no worries... maybe the work around will work ..have tried to plau around with lawnchair as launcher and using its own built in gestures to trigger home

Categories

Resources