p8 lite error driver - P8lite General

I can not solve the problem of drivers, I tried to install on my PC with windows7 all drivers that I found around on p8 lite huawey but not solve think I have a problem give me a solution, when attacking the USB cable phone me sees it as generic device and automatic part Hilite but I always say that the phone device is not connected
In the window of device in control panel Tmp is present with a yellow triangle

maximil_98 said:
I can not solve the problem of drivers, I tried to install on my PC with windows7 all drivers that I found around on p8 lite huawey but not solve think I have a problem give me a solution, when attacking the USB cable phone me sees it as generic device and automatic part Hilite but I always say that the phone device is not connected
In the window of device in control panel Tmp is present with a yellow triangle
Click to expand...
Click to collapse
Have you installed on your PC HiSuite?

Javiertl said:
Have you installed on your PC HiSuite?
Click to expand...
Click to collapse
yes but problem not resolved

Be honest. Is your phone a brand new one, with its original stock rom, without any attempt to change anything? Or have you already done something? If you have, let us know. If not, send your phone to service.

arviit said:
Be honest. Is your phone a brand new one, with its original stock rom, without any attempt to change anything? Or have you already done something? If you have, let us know. If not, send your phone to service.
Click to expand...
Click to collapse
my phone is unlocked and rooted
on the computer of a friend of mine just connect the USB application hisuite and after a few seconds to connect the well, on my computer installs drivers tmp In the window of the device in the control panel TMP is present with a yellow triangle

Related

Problem with connecting X1 to computer

I have bought a Xperia X1, but I can´t connect it to my computer running Windows 7. When I connect the phone to the computer it starts to charge. The computer does not see any device. I have tried to install Windows Mobile Device Center, but it tries to install drivers and then it stands "The device is disconnected" or something.
When i have looking around on the internet, I have realised that there is some kind of CD with something to install. Maybe I need to download that stuff? Please help me!
(Sorry for my BAD english)
Emolinho said:
(...) The computer does not see any device. (...) I have realised that there is some kind of CD with something to install. (...)
Click to expand...
Click to collapse
Try this program USBDeview and see if your windows detects anything when you connect your X1 by a USB cable. If not, then try another cable because it could be broken, also try different USB slots. Well you say that you have tried to installed the Windows Mobile Device Center and USB drivers, so there is nothing more on the CD that you need or anything that you cannot download from the internet
USB Drivers
silmavein said:
Well you say that you have tried to installed the Windows Mobile Device Center and USB drivers, so there is nothing more on the CD that you need or anything that you cannot download from the internet
Click to expand...
Click to collapse
I have not tried to install USB drivers manually, it is just WMDC that tries to install them but fails every single time. Can you please link to them (the drivers)?
USB problem
Hi,
I've the same problem with my x1. I think that this is a physical problem with one of electronic component.
mihaja.navalona said:
Hi,
I've the same problem with my x1. I think that this is a physical problem with one of electronic component.
Click to expand...
Click to collapse
So do you think that the problem will be solved by buying a new USB cable?

[Q] Q: Back to stock?

So I know XDA is full of answers to this one, but it seems everyone either has some snarky comment like, "they won't check' or whatever. There are also some ok answers and tuts but some of it's confusing and a lot of the threads go off topic. So i'd like to ask, how do i get my phone back to stock? i have to mail my device back in for a warranty exchange as the speakers and camera stopped working suddenly.
My device is stock rooted, odex rom w/ TWRP. unlocked bootloader. Super CID and S-off. Tampered message gone in boot loader. My laptop runs Windows 8, which I'm having an issue getting the HTC manager to stay open for some reason, even after an uninstall/ reinstall of the manager and drivers. The drivers themselves seemed to have installed fine as my device is recognized as "my HTC" though when in fastboot, my comp will tell me the device is unrecognized. Using the stock usb plug that came with my phone and I've plugged in to both usb 3.0 and 2.0 ports. And yes, I do have ADB in the root of my computer, though I'm wondering if i need a different type of ADB since this is the one i used with windows 7 a while back..or does it matter?
I'd like to get things back to stock as much as possible and would be very appreciative. Thanks!
whitetiger_0603 said:
So I know XDA is full of answers to this one, but it seems everyone either has some snarky comment like, "they won't check' or whatever. There are also some ok answers and tuts but some of it's confusing and a lot of the threads go off topic. So i'd like to ask, how do i get my phone back to stock? i have to mail my device back in for a warranty exchange as the speakers and camera stopped working suddenly.
My device is stock rooted, odex rom w/ TWRP. unlocked bootloader. Super CID and S-off. Tampered message gone in boot loader. My laptop runs Windows 8, which I'm having an issue getting the HTC manager to stay open for some reason, even after an uninstall/ reinstall of the manager and drivers. The drivers themselves seemed to have installed fine as my device is recognized as "my HTC" though when in fastboot, my comp will tell me the device is unrecognized. Using the stock usb plug that came with my phone and I've plugged in to both usb 3.0 and 2.0 ports. And yes, I do have ADB in the root of my computer, though I'm wondering if i need a different type of ADB since this is the one i used with windows 7 a while back..or does it matter?
I'd like to get things back to stock as much as possible and would be very appreciative. Thanks!
Click to expand...
Click to collapse
if your problem is adb have you tried to add it in the "Environment Variables" ?
have you enabled USB debugging in your phone ?
i have windows 8 too and i don't have this kind of problem
I use windows 8 and it has mostly been trouble free for me. However I did have problems with my laptop recognising my phone when in recovery. It eventually worked on it's own but I found this after:
http://forum.xda-developers.com/showthread.php?t=2232799
Maybe try installing the windows 8 drivers above.
Ardmanz said:
I use windows 8 and it has mostly been trouble free for me. However I did have problems with my laptop recognising my phone when in recovery. It eventually worked on it's own but I found this after:
http://forum.xda-developers.com/showthread.php?t=2232799
Maybe try installing the windows 8 drivers above.
Click to expand...
Click to collapse
Yeah i saw that thread, but my phone was already showing up in devices. It just won't be recognized in bootloader or fastboot.
whitetiger_0603 said:
Yeah i saw that thread, but my phone was already showing up in devices. It just won't be recognized in bootloader or fastboot.
Click to expand...
Click to collapse
Mine was recognised everywhere (including recovery). I'd get the beep from windows 8 and the driver would initialise but it wasn't recognised by adb.
If you haven't tried installing the above drivers yet it certainly wouldn't hurt to try.
Ardmanz said:
Mine was recognised everywhere (including recovery). I'd get the beep from windows 8 and the driver would initialise but it wasn't recognised by adb.
If you haven't tried installing the above drivers yet it certainly wouldn't hurt to try.
Click to expand...
Click to collapse
I gave it a shot while in bootloader. Thanks tons. Just a question though, my cope recognizes my phone however when i input "adb devices" in CMD, nothing shows up. Just wondering if that is an issue before i continue.
Rayskull said:
if your problem is adb have you tried to add it in the "Environment Variables" ?
have you enabled USB debugging in your phone ?
i have windows 8 too and i don't have this kind of problem
Click to expand...
Click to collapse
I glanced at something about the environmental variables but i can't find it again. Yeah i have all the correct settings marked to do this

Phone in USB Host Mode

Hello!,
I got my phone into a weird situation, every time I try to connect to my PC, it's saying "Phone is in USB host mode", the PC tries to recognizes and nothing happens, after that the phone won't charge and stays like that until I rebooted, I can charge it with the original charger after this.
My device:
HTC One AT&T 32GB
ROM: ARHD 41.0
I also tried this method with no results: http://forum.xda-developers.com/showthread.php?t=2481211
Anyone with this situation too?
lumogox said:
Hello!,
I got my phone into a weird situation, every time I try to connect to my PC, it's saying "Phone is in USB host mode", the PC tries to recognizes and nothing happens, after that the phone won't charge and stays like that until I rebooted, I can charge it with the original charger after this.
My device:
HTC One AT&T 32GB
ROM: ARHD 41.0
I also tried this method with no results: http://forum.xda-developers.com/showthread.php?t=2481211
Anyone with this situation too?
Click to expand...
Click to collapse
You mean it's showing up as QHSUSB_DLOAD in Device Manager?
Unfortunately that would indicate a hard brick, no fix, as far as I am aware of.
Welcome to the group of unfortunate people.
I guess the best option would be to send it back for warranty repairs, mine is the same and I'm 99.99% sure it has to do with the charging port.
Unfortunately for me I'm out of the US so warranty shipping is not an option at the moment.
There are other threads about this problem, but so far the only ones I heard that solved this problem was by repair or replace.
You mean it's showing up as QHSUSB_DLOAD in Device Manager?
Unfortunately that would indicate a hard brick, no fix, as far as I am aware of.
Click to expand...
Click to collapse
No, it's not bricked it works ok but only charges through wall charger and if you plug it up to a pc it gets into "USB Host Mode" and then you have to reboot to be able to charge from the wall charger.
My HTC showed the same message. Saying it can not charge into host mode.
HTC only charges powered off.
ferincr said:
Welcome to the group of unfortunate people.
I guess the best option would be to send it back for warranty repairs, mine is the same and I'm 99.99% sure it has to do with the charging port.
Unfortunately for me I'm out of the US so warranty shipping is not an option at the moment.
There are other threads about this problem, but so far the only ones I heard that solved this problem was by repair or replace.
No, it's not bricked it works ok but only charges through wall charger and if you plug it up to a pc it gets into "USB Host Mode" and then you have to reboot to be able to charge from the wall charger.
Click to expand...
Click to collapse
Indeed man, same situation here, I'm actually in Colombia, so not an option to send it, as I can't go back to factory settings without connecting it to the PC.
@nkk71 The device is fully functional, it's just not getting detected on my pc.
lumogox said:
Indeed man, same situation here, I'm actually in Colombia, so not an option to send it, as I can't go back to factory settings without connecting it to the PC.
@nkk71 The device is fully functional, it's just not getting detected on my pc.
Click to expand...
Click to collapse
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
nkk71 said:
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
Click to expand...
Click to collapse
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
nkk71 said:
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
Click to expand...
Click to collapse
lumogox said:
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
Click to expand...
Click to collapse
Steps 8-15 of my guide show how to set up adb/fastboot in Ubuntu 32bit and to check if your device is recognized. You don't have to install Ubuntu just select to try it. I think that's what scares everyone off, is thinking they have to install the OS...It seems like a lot of work but it really isn't and compared to what you've gone through, it can't hurt....good luck
lumogox said:
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
Click to expand...
Click to collapse
Win 7 and XP are pretty much OK with any drivers & hboot & firmware/rom, but what is it exactly showing you when you say "USB Host Mode"?
Have you considered uninstalling everything with HTC.... in control panel, and installing newer version: http://forum.xda-developers.com/showthread.php?t=2089508
then see if you get MTP (Media Transfer Protocol) working again.
USB Host Mode (as in Qualcomm High Speed USB Download Mode) is NOT a good sign! it's a brick about to happen.
maybe try changing the cable you are using to your PC!!!
EDIT: and make sure you're phone's USB port is not dirty or similar
nkk71 said:
Win 7 and XP are pretty much OK with any drivers & hboot & firmware/rom, but what is it exactly showing you when you say "USB Host Mode"?
Have you considered uninstalling everything with HTC.... in control panel, and installing newer version: http://forum.xda-developers.com/showthread.php?t=2089508
then see if you get MTP (Media Transfer Protocol) working again.
USB Host Mode (as in Qualcomm High Speed USB Download Mode) is NOT a good sign! it's a brick about to happen.
maybe try changing the cable you are using to your PC!!!
EDIT: and make sure you're phone's USB port is not dirty or similar
Click to expand...
Click to collapse
1. "Phone is in USB mode" appears as a notification on the phone when plugged to the computer.
2. Installed 3 different ROMs with the same result, uninstall everything, and nothing.
3. Don't know how to get back MTP.
4. Brick??
5. I try to charge it, but same thing happens.
6. Clean the port, and nothing.
lumogox said:
1. "Phone is in USB mode" appears as a notification on the phone when plugged to the computer.
2. Installed 3 different ROMs with the same result, uninstall everything, and nothing.
3. Don't know how to get back MTP.
4. Brick??
5. I try to charge it, but same thing happens.
6. Clean the port, and nothing.
Click to expand...
Click to collapse
let's take this down a notch, we dont care what your phone says, we care what shows up in Windows 7 Device Manager (or XP, maybe even Win8):
for example
I really haven't explored what steps are needed to get it back to stock, but mine connects to the pc as long as it's in bootloader so I can flash stuff like Fw but nothing that need to get into the sd card. (as far as I know).
nkk71 said:
let's take this down a notch, we dont care what your phone says, we care what shows up in Windows 7 Device Manager (or XP, maybe even Win8):
for example
Click to expand...
Click to collapse
Well, it's says nothing... doesn't appear anymore on Win 7 devices.
Try cleaning your USB ports?
Sent from my HTC One using Tapatalk
n1234d said:
Try cleaning your USB ports?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I'm thinking this a port issue, is damage somehow, however, I hope to find a software solution.
New Firmware
Phone that was purchased was not recognized by my computer in recovery and was locked with no S-Off and did not have a Super CID, but assuming that you have all of those things already and are developing these issues then I would try updating the firmware. For some reason, after flashing the 5.11.1540.9 firmware from http://forum.xda-developers.com/showthread.php?t=2485651 and updating to ARHD 71.1 the charging issue all has seemed to disappear. If anyone wants the full run down of how I got from my original non-functioning and unrecognized phone to where it is now I can put in details, but as far as I can tell the issue is just with the firmware if you find yourself being able to intermittently charge in different scenarios when it is off.
Loading New Firmware
Also, for some reason, computer would not recognize phone with TWRP recovery yet I could push files through adb when using CWM recovery. So what happened for me was loading up CWM and pushing the files that I needed into the data folder and flashing TWRP to then install it or rebooting the phone as normal and finding the file with something like a root file explorer. I feel like I may not be very clear with this so post if there needs to be more clarification.
it's a strange issue ,i think it is a hardware problem,happen to me and i try everything possible,without success,than i charge phone when power of and it was the only way ,but led was flashing so it was intermittent charging,i was able to charge only to 97%..i use my phone and somehow next day i was able to charge phone,but then problem occur again...and wired thing is that fastboot devices list is not empty but adb devices list is empty,so phone is not fully recognized by computer,and i forgot to say that day when i was able to charge phone,adb command worked...that day i flashed firmware recovery and rom again ,because i thought it will resolve the problem...
---------- Post added at 11:35 PM ---------- Previous post was at 11:23 PM ----------
ricehoshi said:
Phone that was purchased was not recognized by my computer in recovery and was locked with no S-Off and did not have a Super CID, but assuming that you have all of those things already and are developing these issues then I would try updating the firmware. For some reason, after flashing the 5.11.1540.9 firmware from http://forum.xda-developers.com/showthread.php?t=2485651 and updating to ARHD 71.1 the charging issue all has seemed to disappear. If anyone wants the full run down of how I got from my original non-functioning and unrecognized phone to where it is now I can put in details, but as far as I can tell the issue is just with the firmware if you find yourself being able to intermittently charge in different scenarios when it is off.
Click to expand...
Click to collapse
And do have same problem again after flashing new firmware?
The phone was a gift for my dad and it has been running fine since my last post. No charging issues and the phone does not go into host mode randomly anymore.
Well i also had the same problem...but i did factory reset on the phone and flashed it to completly stock ...and since then no problem..
Sent from my HTC One using XDA Free mobile app

[Q] Very puzzling USB phone issue-please help

I have the sprint htc one m7, I have been connecting it to my PC widows 7 64bit for the past year without any issues. I have the proper drivers installed on the pc. Now when I plug in via usb I get an immediate error message= on the pc it says DEVICE DRIVER SOFTWARE NOT SUCCESSFULLY INSTALLED, on the phone it says USB HOST CABLE IS PLUGGED IN UNABLE TO CHARGE.
I think the problem is with the phone because I have tried two computers different usb ports and cables and get the same. I also tried my wife’s phone and it works as it should. She has the same phone only difference is mine is rooted (stock4.4.2) and hers is not rooted.
I have tried uninstalling the drivers and reinstalling and get the same thing.
This is really bugging me because I don’t know what changed on my phone to cause this.
Please Please help if you can. I have searched for the solution without any luck
THANKS
Doug
Quick note=Under the driver software was not successfully installed message on my pc it says MTP USB DEVICE then has a red X with DEVICE UNPLUGGED next to it?
It is however able to see the phone when i put it in Fastboot= Fastbootusb.
What the heck is going on???
another note= after plugging it into the computer and getting the errors, when i plug it in to the wall charger it will not charge. Unless i reboot it then it will charge.
Anybody got an idea?
dug13 said:
I have the sprint htc one m7, I have been connecting it to my PC widows 7 64bit for the past year without any issues. I have the proper drivers installed on the pc. Now when I plug in via usb I get an immediate error message= on the pc it says DEVICE DRIVER SOFTWARE NOT SUCCESSFULLY INSTALLED, on the phone it says USB HOST CABLE IS PLUGGED IN UNABLE TO CHARGE.
I think the problem is with the phone because I have tried two computers different usb ports and cables and get the same. I also tried my wife’s phone and it works as it should. She has the same phone only difference is mine is rooted (stock4.4.2) and hers is not rooted.
I have tried uninstalling the drivers and reinstalling and get the same thing.
This is really bugging me because I don’t know what changed on my phone to cause this.
Please Please help if you can. I have searched for the solution without any luck
THANKS
Doug
Quick note=Under the driver software was not successfully installed message on my pc it says MTP USB DEVICE then has a red X with DEVICE UNPLUGGED next to it?
It is however able to see the phone when i put it in Fastboot= Fastbootusb.
What the heck is going on???
another note= after plugging it into the computer and getting the errors, when i plug it in to the wall charger it will not charge. Unless i reboot it then it will charge.
Anybody got an idea?
Click to expand...
Click to collapse
This is probably the most drastic method to fix it but the most likely way to fix it. Flash a RUU it reverts EVERYTHING to stock and deletes everything you had in the phone.
Since the computer recongizes it in fastboot RUU will work. Make a backup and if you are S-On then you have to relock bootloader first
Thanks for the reply, i thought about RUU and will probably have to attempt it. Im just not sure if its a software or a hardware issue? Everything else on the phone seems to be working fine. It just will not show up on any computer, i have tried 3 different computers and even installed HTC sync software on one and I still get the same error message.
Does this sound like a software issue or a hardware?
What do you think?
dug13 said:
Thanks for the reply, i thought about RUU and will probably have to attempt it. Im just not sure if its a software or a hardware issue? Everything else on the phone seems to be working fine. It just will not show up on any computer, i have tried 3 different computers and even installed HTC sync software on one and I still get the same error message.
Does this sound like a software issue or a hardware?
Click to expand...
Click to collapse
What do you think?
dug13 said:
What do you think?
Click to expand...
Click to collapse
sounds like a software problem since if it was hardware it wouldnt show up in fastboot either.
PLEASE HElp RUU failed to fix???????
ok as stated in the OP my HTC one wont connect to my pc. The only time is connected was in fastboot, so i did an RUU to attempt to fix the problem. After a successful RUU I still have the same problem= usb debugging is on i plug it in, it says installing drivers. Then I get the red X and the error message says =HTC MTP DEVICE IS UNPLUGGED & HTC MTP DEVICE FAILED.
I know everything else is working because my wife's phone connects no problem- so its not the usb port or cable my setting are the same.
ANYBODY GOT A SOLUTION?
PLEASE HELP- TIA
DOUG
dug13 said:
ok as stated in the OP my HTC one wont connect to my pc. The only time is connected was in fastboot, so i did an RUU to attempt to fix the problem. After a successful RUU I still have the same problem= usb debugging is on i plug it in, it says installing drivers. Then I get the red X and the error message says =HTC MTP DEVICE IS UNPLUGGED & HTC MTP DEVICE FAILED.
I know everything else is working because my wife's phone connects no problem- so its not the usb port or cable my setting are the same.
ANYBODY GOT A SOLUTION?
PLEASE HELP- TIA
DOUG
Click to expand...
Click to collapse
try talking to htc offical live chat
dont mention anything about being s-off or being rooted though they wont help you then.
as long as you are ruu you should have everything stock

No USB recognition at all, HELP.!

Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
mrmazak said:
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
Click to expand...
Click to collapse
I tried with diferents usb cables, and nothing happened.
mykrov said:
I tried with diferents usb cables, and nothing happened.
Click to expand...
Click to collapse
Do you know if any of them are sync cables??
codyalan said:
Do you know if any of them are sync cables??
Click to expand...
Click to collapse
They are USB cables that i use on others phones (lg 4x HD and Honor 6X) and work fine with those phones but not on my R1Hd
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
elcarmi said:
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
Click to expand...
Click to collapse
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
mykrov said:
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
Click to expand...
Click to collapse
As far as I know downgrading is not possible without making the phone unusable. If by any chance that is possible maybe an update from an SD Card can work.

Categories

Resources