Google now reminders ignoring Interruptions settings in Priority mode? - Nexus 6 Q&A, Help & Troubleshooting

I'm on 5.1. I want to set priority mode so that it behaves similarly to the old silent mode on prior Android versions. For example, when I'm sleeping, I want to set up priority mode so that I ONLY get alarms (no sound or vibrate for calls, messages, reminders, other app notifications, etc.).
Anyway, I have configured the following settings:
When calls and notifications arrive -> Allow only priority interruptions
Priority interruptions:
Events and reminders -> ***OFF***
Calls -> OFF
Messages -> OFF
My problem is that, even though "Events and reminders" is set to OFF, I STILL get a notification sound and vibration for reminders set within Google Now. However, this DOESN'T happen for reminders attached to notes within Google Keep. I haven't yet tested all the other possibilities with Calendar events and reminders.
In the "App notifications" settings for the "Google App", Priority is OFF.
What is the expected behavior?
This seems like a bug to me.
As an additional comment, it seems like it would be useful to have customizable presets for the Interruptions settings. Depending on the situation, I may want to configure interruption settings differently. For example, sleep vs. in-a-meeting vs. driving vs. in-a-movie-theater, etc. Rather than having a single "Priority" mode, there could be a drop-down where you select from an arbitrary number of customized presets.
Finally, how do the per-app notification priority settings interact with the Interruptions settings? For example, what is supposed to happen if I turn on Priority in the per-app notifications settings for Hangouts, but have Messages OFF in the Interruptions settings. What happens when I get an SMS?

thomase00 said:
I'm on 5.1. I want to set priority mode so that it behaves similarly to the old silent mode on prior Android versions. For example, when I'm sleeping, I want to set up priority mode so that I ONLY get alarms (no sound or vibrate for calls, messages, reminders, other app notifications, etc.).
Anyway, I have configured the following settings:
When calls and notifications arrive -> Allow only priority interruptions
Priority interruptions:
Events and reminders -> ***OFF***
Calls -> OFF
Messages -> OFF
My problem is that, even though "Events and reminders" is set to OFF, I STILL get a notification sound and vibration for reminders set within Google Now. However, this DOESN'T happen for reminders attached to notes within Google Keep. I haven't yet tested all the other possibilities with Calendar events and reminders.
In the "App notifications" settings for the "Google App", Priority is OFF.
What is the expected behavior?
This seems like a bug to me.
As an additional comment, it seems like it would be useful to have customizable presets for the Interruptions settings. Depending on the situation, I may want to configure interruption settings differently. For example, sleep vs. in-a-meeting vs. driving vs. in-a-movie-theater, etc. Rather than having a single "Priority" mode, there could be a drop-down where you select from an arbitrary number of customized presets.
Finally, how do the per-app notification priority settings interact with the Interruptions settings? For example, what is supposed to happen if I turn on Priority in the per-app notifications settings for Hangouts, but have Messages OFF in the Interruptions settings. What happens when I get an SMS?
Click to expand...
Click to collapse
Have you checked the settings in the Google Now app itself? Notifications are set up as either priority or none for the app. Looks like they are set to priority by default. Google Now> tap the 3 lines and select settings> Now Cards.... see the screenshots below.

I have Ringtone set to silent and vibrate turned on. In priority mode, I still get a sound for reminders. I don't really understand what these settings do.
Sent from my XT1060 using Tapatalk

Related

Is there a way to turn off alerts/alarms coming from the S planner?

Is there a way to turn off alerts/alarms coming from the S planner?
I'm planning on using Calengoo.
Won't the alerts double? One coming from S-planner and the other coming from Calengoo?
I cannot turn of the calendars in S planner as Calengoo seems to need it to be able to get calendar data from my google account (I don't want to give Calengoo my login details, thus it is syncing from my Android device which is syncing to my Google Account)
Thanks for what enlightenment you guys can give.
I, too, would love some advice on this issue. Just using Outlook and the S Calendar. What I would like to do is to turn off the spoken notifications but still receive an event notification in the notification bar. And I still want the phone to ring.
What about "Set alarms and notifications" option in s planner options accessible after pressing menu key? I can set "Alarm", "Notification", "Disabled". There is another menu entry for vibration...
Thanks. But the problem with choosing to disable it is that I no longer receive any notification. I would like a notice in the notification bar - I just don't want my notification bar speaking. I tried changing the notification sound volume to zero. That worked to silence notifications about texts (but I still get the vibrate). But my calender still speaks.
Well, I found a fix for my problem, but it won't help the OP. Turns out the phone was in driving mode and that overrode application settings.

[Q] Vibrate mode overrides individual app settings

Just picked up a Droid Turbo. I noticed when I have the phone in vibrate mode, I get a double buzz for EVERY notification on my phone, even on apps where I've specifically made sure to not enable vibrate.
For example, in the Messaging app, I've selected a notification sound, enabled notifications, but did not check the box next to vibrate. When I get a text, I get the double vibrate.
Is there something I'm missing, or is this a Moto bug/"feature"?
Unless you disabled notification sounds as well for the apps you are mentioning, you are describing the expected functionality for Android. Vibrate mode replaces all notification sounds with a vibrate patter. It does not simply disable sounds and leave only vibration preferences active.
Sent from my XT1254 using XDA Free mobile app
Strange, I've had an LG and an HTC in the past and both behaved that way, where when vibrate mode was selected, it responded to each apps preferences.
Example scenario.
Gmail vibrate on notify, play sound on notify.
Google plus no vibration on notify, play sound on notify.
When in vibrate mode, id get buzzed for gmail as well as a notification icon, but for google plus id only get the notification icon.

[Q] Downtime, Priority Mode, Sleep Mode with Moto Assist in Lollipop

Hey guys,
I don't own a Motorola device running Lollipop, but I'm curious as to how Moto Assist handles the Priority Mode in Lollipop.
If I'm not mistaken, in KitKat, Assist's 'Sleep Mode' will switch the phone into Silent Mode, depending on the time you've set. Also, you get the option for certain contacts to be able to get to you while the Sleep Mode is on (with the choice of None, Starred Contacts, Everyone in your phone book). I can't remember if there's the option to let Messages from the white-listed contacts to ring during Sleep Mode period, or even an auto-reply for all calls/text rejected during Sleep Mode.
I'm curious… how does Moto Assist handle this Priority Mode/None/All found in Lollipop?
If I'm not mistaken, if you've set Sleep Mode in Assist, it will turn on Priority Mode. Are you limited to the same options, as to how Contacts white-listing are handled (choice of None, Starred and Everyone?). Does Assist offer a more granular control or finer tuning in comparison to the native Interruption settings? Is Assist not a replacement for the native Priority Mode, and it only acts as something that turns on Priority Mode (separate from the native Downtime setting)
Setting up Meeting Mode, will also turn on Priority Mode. Is the Auto-Reply feature still there? Same with the above point on whitelisting contacts/notification types.
Is this conflicting with Android's own/built-in settings in Settings > Sounds and notifications > Interruption. Particularly the type of notifications that are let through (Calls, Messages, Alarms), and which contacts are being let through? (None, Starred Contacts Only, Everyone)
I guess if you can upload screenshots/video how Assist looks in L, that would help answer some of the questions I have!
Thanks!
OK, sleep is the same as no calls (although, I seem to remember it will ring if a favourite calls you more than once in quick succession).
Meeting is none or favourites for auto reply.
Is it conflicting? No. Works fine.

Trying to make a sleep mode profile for my oneplus 7 pro.....

There is so much do not disturb customization in this version of android or perhaps specific to oneplus. I am not sure which. That I'm not sure how to make this do what I'm used to it doing on my previous device LG G4. During the day I have it more or less as follows I may be forgetting some things:
Only ring if the phone call is from someone in my contacts.
Text messages always sound etc no matter who sent them.
Email always sounds.
Calendar always sounds.
What I need is the profile to silence everything while I sleep. To do this on the LG G4 I had a sleep profile from 12am to 12pm that set all volume controls to zero. And somehow though I can't remember ended that sleep profile early if I had an alarm go off during that time frame so that I could be disturbed because I was no longer sleeping after the alarm went off. The reason for the 12am to 12pm time frame was to give leeway to time going to bed and also time for waking up without an alarm. The idea was so that I didn't forget to silence things before going to be and forget to undo that once I was awake.
So typically DND settings built into android allow at least close to this level of control. I'm not sure how Oxygen OS is configured, but on a Pixel I can configure DND to ring only for starred contacts, but allow text and other notifications through. Or, silence everything.
All of that said, you should be able to manage volume levels through Tasker, reject (send to voicemail) calls that are not in your contacts.
If you import your old profile, doesn't it work on the OnePlus?
ktmom said:
So typically DND settings built into android allow at least close to this level of control. I'm not sure how Oxygen OS is configured, but on a Pixel I can configure DND to ring only for starred contacts, but allow text and other notifications through. Or, silence everything.
All of that said, you should be able to manage volume levels through Tasker, reject (send to voicemail) calls that are not in your contacts.
If you import your old profile, doesn't it work on the OnePlus?
Click to expand...
Click to collapse
Stupid me I forgot to backup my old tasker stuff so I have to start from scratch again.
In the do not disturb setting UI of the settings UI there are the following:
Toggle DND on/off: this is toggled on and is set to stay on all the time.
Behavior heading
Notifications: tapping it opens a new UI giving you some default choices for notifications in general. I have this set to no sound at all. And override DND in specific areas outside of this part of settings regarding notifications from SMS/MMS messages, email, voicemail, calendar alarms. Might be one or two I am forgetting to mention.
Exception heading
Calls: tapping here brings up settings to allow calls from (anyone, contacts only, starred contacts only, none.) I have this set to contacts only.
Messages: same detail as calls. Set same as calls.
Other sounds: toggles to allow alarms, media, and touch sounds. I have these toggled to allow.
As for the other stuff that overrides DND I accessed that setting from within each of the apps settings. Not sure if that was a redirect from the app settings to a system settings area that I'm not aware of how to get to otherwise. So what I need is a profile that will mute everything while I sleep and return to how everything is currently set. On the LG G4 I accomplished this by turning all volumes to zero for sleep and then restored them all to 100% upon either the end time trigger of the sleep profile on upon an alarm I set to get up before the end of the timeframe of the profile.
What I was wondering if this was the way to go or if a more simple toggle one setting would accomplish it. I didn't see any DND setting in the system setting for no interruptions at all despite the overrides set. What I'm thinking is the same approach as before and set media, notification, ringer, and system volumes to zero and restore to 100% at end. The part I can't remember how I did it was ending the sleep profile when an alarm goes off that I set to a time prior to the end of the timeframe of the profile. Any idea how I would have done that?
I think which ever way gets you where you want to be is the way to go [emoji6]
On my Google phone, that's the ability to mute everything except alarms. There is also a toggle to disable DND when an alarm goes off.
As far as using tasker to turn volumes back up when an alarm goes off, my way of doing that is to intercept the notification for the alarm. Again, I'm using Google clock, and the way the notifications work may be different on your device.
Here is a taskernet share of a basic project using a notification intercept of the Google Clock alarm. Because there can be namespace collisions with imported projects, I append a variant of my username into variables, task and project names.
For everything to work the way it did I would need the sleep profile to end when an alarm goes off. The problem is I can't remember how that was done. I don't see an end condition that can be added to the sleep profile. The actual sleep profile is the only part I can remember enough to have replicated at this point. It being a from 12am to 12pm with a start task that turns all the volumes down to zero and an end task that turns them all back up. The alarm part I can't recall how it was done.
What was wrong with the notification intercept I shared?
That particular project was to put a large dismiss/snooze on the screen for a low vision individual, but it intercepts the alarm firing notification (for Google clock) and as I already said, intercepting the notification is the way I would do it.
It looks like it is a nice project, but it is requiring a plug-in. However the toggle was made before didn't require any additional things to be added. Isn't there a native event or state that a profile can trigger when an alarm goes off?
I assumed you tried using the native alarm clock or alarm done events in a profile and those didn't work. If you haven't, then try them. They don't work on my devices.
You could research java functions to get the next alarm and use the native java function action to then set a profile time context.
Remembered that tasker was designed to be a framework into which functionality could be added through plugins.
One of those is probably what was used on my LG G4. Now to figure out if this was a part of the one profile or a separate profile. I assume 2nd profile as I don't see any way of adding a 2nd end condition to the first. I remember when it was originally designed the conversation arriving at a solution to function as wanted was a long one. What bothered me is that the thread it took place in is missing from the forum it took place in. I even attempted to inquire there again about making it but after a week of no response I figured it was no longer a good place to post at.
StoneRyno said:
One of those is probably what was used on my LG G4. Now to figure out if this was a part of the one profile or a separate profile. I assume 2nd profile as I don't see any way of adding a 2nd end condition to the first. I remember when it was originally designed the conversation arriving at a solution to function as wanted was a long one. What bothered me is that the thread it took place in is missing from the forum it took place in. I even attempted to inquire there again about making it but after a week of no response I figured it was no longer a good place to post at.
Click to expand...
Click to collapse
What do you mean "2nd end condition"? A second context (condition) in the profile? Long press the first context.
The sleep profile uses time condition 12am to 12pm. I only need a 2nd condition that ends it but doesn't impact the start. I know for sure I can do that with a second profile now that I know what I needed to use to as event trigger. I can run a task that toggles off the sleep profile and toggles it back on some hours later to trigger again at 12am. I wasn't sure if the alarm event could be an alternative condition for end so that the sleep profile was 12am to alarm done or 12pm.

Question Gmail app will not show notifications

Hi all,
I'm having to resort to posting here before I pull all of my hair out.
I'm running stock MIUI 13(.0.10). In the Gmail app, my account settings have notifications set to 'all'. The 'manage notifications' button that brings up the system settings has notifications enabled (sound, vibrate on). Sync is set to last 30 days, and enabled. General settings > manage notifications has everything enabled through the system settings as well. Apps > Gmail > Battery Saver is set to no restrictions.
What am I missing? It's not that it's not alerting to notifications but they still appear, they are just not present at all. I manage multiple inboxes through my primary Gmail account, and this is hugely annoying.

Categories

Resources