Database Develop

[KERNEL][ARC/S] LuPuSv3 [CM9 BASED][LINARO][31-12-2012]

LuPuS Kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LuPuS-ARC/S-STOCK KERNEL HERE!!
LuPuS-JB-CM10/AOKP KERNEL HERE
Hi most of you already know my LuPuS-Stock kernel so thought i'd make one for you all that will work with any
cm9 based roms such as AOKP-by Supervenom and Paranoid Android, and obviously CM9 as well. Just wanna say a
big thanks to FXP - Jerpelea for pointing me in the rite direction for wifi to work
and of course the people who help me test besttt and sinkster for testing on both ARC-S and ARC
What i'm going to do is just update this by the end of the week to add everything else in.
So here is whats added so far but first it has to be done ------------
Disclaimer
Code:
[COLOR="DarkOrchid"]#include[/COLOR] [COLOR="Magenta"][/COLOR]
[COLOR="Blue"]/*
* Your warranty is now void.. LOL I guess you knew it already.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone
* bootloops and alarm does not go off. Please do some research if you have any
* concerns about features included in my kernel before using it! YOU and only
* YOU are choosing to make these modifications.
*/
[COLOR="Magenta"]#if[/COLOR]
You have a [COLOR="DarkGreen"]question[/COLOR] post it in the [COLOR="DarkRed"]thread[/COLOR],
Instead of [COLOR="DarkGreen"]Pm'ing me[/COLOR], as other users may
experience your [COLOR="DarkRed"]problems[/COLOR]
[COLOR="Magenta"]#endif[/COLOR][/COLOR]
What Works --
Wifi - (flash modules)
Data
Camera
Panorama
Video Recording (720p now works)
Video Playback
Front Camera
Bluetooth
Everything Else that works on FXP
What doesn't work --
Anything that doesn't work on FXP
Included in kernel
[/LIST]
Added Io-schedulers --
- Noop
- Anticipatory
- Deadline
- CFQ
- BFQ
- SIO
Added Governors --
- lagfree
- brazillianwax
- smoothass
- scary
- savagedzen
- smartass
- smartassv2
- interactivex
- minmax
- powersave
- performance
- conservative
- ondemand
- interactive
- userspace
+
Lulzactive - Thanks to Tegrak
Based on Interactive and Smartass. When workload is greater than or equal to 60%, the governor scales up
CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step.
When screen is off, frequency is locked to global scaling minimum frequency
Virtuous
Virtuous is a modded smartassV2 which gives even more battery time then smartassV2
Intellidemand - Thanks to faux123
This is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling,
and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such.
Intellidemand does not jump to highest frequency when screen is off.
Lazy - Thanks to Ezekeel
The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand.
Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state
on a step overriding sampling interval.
Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always
select the maximum frequency while the screen is off.
-Ondemandx:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.
-Lionheart:
Is a conservative-based governor. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
To 'experience' Lionheart using conservative, try these tweaks:
sampling_rate:10000 or 20000 or 50000, whichever you feel is safer. (transition latency of the CPU is something below 10ms/10,000uS hence using 10,000 might not be safe).
up_threshold:60
down_threshold:30
freq_step:5
Lionheart goes well with deadline i/o scheduler. When it comes to smoothness (not considering battery drain), a tuned conservative delivers more as compared to a tuned ondemand.
BadAss Governor:
Badass removes all of this "fast peaking" to the max frequency. Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1024Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
Superbad -
A "superbad" super smooth rendition of a highly optimized "smartass" governor!
Darkside -
A "slightly more agressive smart" optimized governor!
What else-----
-SLQB - (SLAB allocator with Queue)-(both)
This memory allocator is designed for small number of CPUs system (such as desktop or smart phone devices). This allocator is design to be simple and it is optimized for using order-0 pages as much as possible (order-0 pages are the simplest therefore quickest type of memory in a Linux system to allocate).
- Added Cleancache
- Supports ext 2,3
- Updated zRam
- Lzo compression/decompression speed has doubled on average.
- Init.d support
- Fudgeswap
- And much more
- O/C and stable upto 2ghz, although I do not recommend O/C to 2ghz for long periods of time, do so at your own risk.
Show your support for the kernel and my work by putting this in your signature, its only a quick one I done up with my limited time
Code:
http://i.imgur.com/xtWNL.png
Downloads in post 2
I would like to say a big thanks to -
FXP - Sources/help with wifi (thanks Jerpelea)
Cyanogenmod - Sources
DooMLoRD - for patches and all the work he has done for Xpeeria's
xeozus
NobodyAtAll
Faux123
Erasmus
Leedroid
Jerpelea
Anyone missing please PM me
Sinkster - Testing for ARC
besttt - testing for ARC-S
tempest918 - For the New Logo
Please Click Thanks :good:
Kernel sources -b ics
https://github.com/garwedgess/LuPuS-CM-iCs

Changelog
*** Previous changelog was messed up so I'll include everything in here ***
Code:
[B][U]v3[/U][/B]
- All previous boot issues / issues fixed
- Improved Battery Life alot :)
- Thumbee support
- EXT 2/3 & 4 supported
- Init.d supported
- Init.d scripts added (run at boot)
- SLQB Memory allocator
- ARM7 optimizations
- Brought OC back down to 1.6 max (no need for it above 1.6 unless u want to kill your device)
- Kernel sources completely reworked started from scratch o Sony xx.587 sources
- Tiny RCU
- Updatedd patched and fixed LZO
- lowered vfs cache pressure
- Increased Wifi- Range and added support for channel 14
- 0 % Battery patch - Thanks @ Bazoocaze
- Better memory copy
- Better memory move
- Deep sleep issue fixed
- LMK Optimizations (LowMemoryKiller)
- VDD support (voltage conrol)
- Linaro Optimzations
- Compaction added
- KSM
- CIFS (improved support)
- NTFS
- Updated to newest SIO Io-Scheduler
- Google Snappy Compress & Decompress
- Added Vibrate To Recovery (Notification to enter CWM)
- Wifi module size drasticly reduced
** Possibly missing a few things **
Downloads
If you like my work please consider buying me a beer or something else
by clicking the DONATE ME button, of course it isn't needed but greatly appreciated and keeps me motivated.
Thank you to members -
~ Frenchdroid
~ [user_99]
For your kind donations
ARC/S CM9 KERNEL
LuPuS-ARC-CM9.img
MD5 = 0638186df6b258457ed440e76991f6fa
Wifi modules in attachments
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Check your MD5 match the above if not re-download
Zram is not enabled by default- to enable it flash the zip below
If for whatever reason you want to disable it after you have flashed the .zip, just go to ect/init.d and delete 00zram :victory:

CIFS
The attached zip for CIFS is not a flashable zip read below
Make sure you download Cifs-v2 if your using v2 of kernel
What is CIFS???
Server Message Block (SMB) or Common Internet File System (CIFS) are normally used to provide shared access to files on a network, mostly involving computers running MS Windows.
It allows you to conveniently mount/unmount your network accessible file resources and access the files transparently via your favourite Android app (playing music / videos, accessing documents etc.) Settings are stored on your SD card with permissions to write also to your SD card.
Instructions
- extract cifsfile.zip from below
- save cifs,ko file to your sdcard
- in terminal emulator
- cd sdcard
- su
- insmod cifs.ko
Now download CifsManager or similar app and configure it

Ooh, was waiting for it. Gonna try that as soon as I get to office (home PC doesn't recognize fastboot mode :-\)
Sent from nowhere

tajimura said:
Ooh, was waiting for it. Gonna try that as soon as I get to office (home PC doesn't recognize fastboot mode :-\)
Sent from nowhere
Click to expand...
Click to collapse
try to install drivers for x10 from drivers folder in flashtool instalation folder.
i gotta try this kernel tomorow
Sent From Xperia Arc - CM10 Using Xda Premium!

Marchello1 said:
try to install drivers for x10 from drivers folder in flashtool instalation folder.
i gotta try this kernel tomorow
Sent From Xperia Arc - CM10 Using Xda Premium!
Click to expand...
Click to collapse
All drivers are in place, and I can use Flash mode, but when I connect in fastboot mode (blue led) Flashtool says "phone connected in flash mode" and fastboot itself complains that there are no connected devices.
Sent from nowhere

tajimura said:
All drivers are in place, and I can use Flash mode, but when I connect in fastboot mode (blue led) Flashtool says "phone connected in flash mode" and fastboot itself complains that there are no connected devices.
Sent from nowhere
Click to expand...
Click to collapse
Reinstalled flashtool recently, got that error, reinstalled the drivers one by one and it worked. For further help (from those that i'm sure know better than me) go to the flashtool sticky thread.

wi fi information
because your rom has the last modules from fxp kernel perhaps the signal is no so good do the follow
go to setings wifi delete from memory the pass and create it again and now wi fi is turbo i get from bencmark quadrand 2340 score with settings sio intelidemand oc min346 oc max 1800

seeing how there's an overwhelming amount of governors and schedulers lol can anyone recommend a combination for bother performance and battery?
btw why is there only 341 MB of ram instead of the usual 360 MB..

h.debnath said:
seeing how there's an overwhelming amount of governors and schedulers lol can anyone recommend a combination for bother performance and battery?
btw why is there only 341 MB of ram instead of the usual 360 MB..
Click to expand...
Click to collapse
Less ram because of 720p recording, was going to remove it but though people would want it, fxp have re-added it to fxp137, I can i Ilsa remove it for next release of people don't want it.
As for governors for performance I recommend intellidemand, superbad, darkside or battery life smartass, smartassv2 or virtuous. And keep SIO as scheduler it default in all my kernels
Sent from my GT-I9300

Left it overnight, 3g on, sync on, bad ass/noop. Battery drained 11% over 10 hours, which is great compared to any cm9 previously.

Someone tried this on Arc S with the cm9 wi-fi problem (getting ip address loop)?
Inviato dal mio Xperia Arc con Tapatalk 2

Disable BT.
Remove the two files from /data/misc/dhcp.
Reboot.
You're done

mekayzer said:
Disable BT.
Remove the two files from /data/misc/dhcp.
Reboot.
You're done
Click to expand...
Click to collapse
I know, but for me never worked, but thank you for your answer.
Xperia Arc S with aokp jb

Then, fix you ip adress and don't use dhcp.

Thank's for the kernel Wedgess, but can you post one based on CM7.2

mekayzer said:
Thank's for the kernel Wedgess, but can you post one based on CM7.2
Click to expand...
Click to collapse
No problem, unfortunately I do not plan on making one for CM7, I've had this request for the play also. CM9 is stable so no need for cm7. I do not have time to maintain any more kernels cm 10 kernel will be out this week and that will take my. Kernels to 10, I simply don't have the time, and besides I'll get in Trouble with the missus.......sorry
Sent from my GT-I9300

Running for approximately 6 hours, great so far. Using Virtuous gov., sio scheduler, 249-1130. Smooth, stable and battery friendly.
However, didn't test Wi-Fi yet.
Sent from nowhere

Just waiting for FXP137 to finish downloading then going to use this. Thanks.

wi fi problems
cm9.1 cm10 roms use kernels from 431 firmware dont use people baseband 77 only 72 with that roms.....if kernel changed we need other baseband

[KERNEL][P900-KitKat]CivZ-P900-REV4.4[25/05/2015]

Based on Samsung Official source​
CivZ-P900 Kernel Download Folder.​KERNEL FEATURES REV4.4 source
Install with custom recovery
KNOX removed (container service, SecureStorage)
SELINUX protection included but set at Permissive = No problems wit apps like Paragon and Titainium.
INIT.D Support
FRANDOM
ARCH Enabled
NEON @ Faux123
DYNAMIC FSYNC & [email protected] Faux123
POWERSUSPEND @ Faux123 & Yank555.lu
SPen BOOSTER CONTROL @ bonuzzz
INTERNAL & MEMORY VOLTAGE CONTROL @ Andreilux & halaszk
MEMORY Frequency up to 933MHz
OVERCLOCKING & VOLTAGE CONTROL CPU & GPU @ Andreilux & halaszk (CPU:200MHz up to 21000MHz / GPU: up to 677MHz)
BFQ SCHEDULER ADDED
ONDEMAND GOVERNOR TWEAK @ oloendithias
WOLFSON DAC SOUND CONTROL ( Speaker and Headphone equalizer) @ Andreilux & oloendithias
DIRTY WRITEBACK & DYNAMIC READ AHEAD
SAMSUNG DYNAMIC HOTPLUG CONTROL @ oloendithias
EXTRA TCP WIFI CONNECTION OPTIONS
SCREEN mDnie control @ Andreilux & Xluco
MEMCOPY & string @ Miao Xie
WORKQUEUE added = Power_efficient = Better battery stats.
NTFS READ WRITE SUPPORT (with paragon)
MODULES LOADABLE
SWAP/CLEANCACHE/FRONTSWAP
CIFS
COMPILED WITH GCC 4.7.4 Linaro
XZ COMPRESSED
GPU Qos control, added control in synapse @ UpInTheAir
UKSM = Ultra Kernel Samepage Merging, added control in synapse
FULL CONTROL WITH SYNAPSE APP (Thanks to Andreilux for the app and UpInTheAir for most of the layout)
Some screens of the Synapse:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
etc.........
Changelog KERNEL:
24/10/2014 Rev2.1 Released
26/10/2014 Release Rev2.3:
Optimized AES & SHA1 routines
F2FS
Google Snappy compression
Memcopy & string
Removed Intelli_Hotplug = causing shutdown when charging
Rework of the Samsung Dynamic Hotplug service
Sync tweaked
Workqueue added = Power_efficient = Better battery stats.
02/11/2014 Release Rev2.4:
GPU Overclock rework = 677MHz
Battery control removed = caused some charge problems = @ 100% auto shutdown
Samsung Hotplug service rework @ oloendithias
More control settings
GPU Min frequency is controlled by the hotplug service from now on.
GPU min freq is 100MHz when screen is OFF, when the screen is on it is 266MHz.
04/11/2014 Release Rev2.6:
ARM NEON Support @ Andreilux & Xluco
Screen mDnie control @ Andreilux & Xluco
CPUI Idle tweaks
Synapse options added.
13/11/2014 Release Rev2.9:
ARM NEON Activated now
Samsung Hotplug service tweaked and adjusted in Synapse
F2FS & Battery control removed
Min Screen ON frequency is now set at 177MHz by the hotplug driver
CIFS supported fixed ( my bad , forgot some stuff in the ramdisk)
14/11/2014 Release Rev3.0:
ARM NEON Activated now
Samsung Hotplug service tweaked and adjusted in Synapse
04/12/2014 Release Rev3.2:
Samsung Hotplug service tweaked and adjusted in Synapse
GPU governor tweaked
Removed useless drivers, swap, zwap, frontswap, cleancache, KSM , Joystick = All memory stuff like swap is not needed on a device with 3GB ram. This stuff is for devices with a low Ram. It only causes lagg caused by the needless swapping. = my opinion
09/02/2015 Release Rev3.3:
JoyStick support for the X-Box controller, (pc with usb connection) (Tested it with Skylander game)
OTG USB support activated in kernel
05/04/2015 Release Rev4.0:
Re based on Bonuzzz source + mine
Hotplugg control updated (synapse)
KSM added + control (synapse)
GPU control rework + control (synapse)
Gentle sleeper + control (synapse)
zswap + control (synapse)
LMK Whitelist + control (synapse)
Thermal control added (synapse)
Battery control added (synapse)
WIFI power control added (synapse)
Log control added (synapse)
18/04/2015 Release Rev4.1:
changed some compiling flags and settings = tip from bonuzzz.
05/05/2015 Release Rev4.2:
changed some compiling flags and settings = solved some random reboot problems.
25/05/2015 Release Rev4.4:
GPU Qos control, added control in synapse @ UpInTheAir
UKSM = Ultra Kernel Samepage Merging, added control in synapse
Some changes in the GPU OC code.
XDA:DevDB Information
CivZ-P900-KitKat-Kernel, Kernel for the Samsung Galaxy Note Pro 12.2
Contributors
civato
Kernel Special Features:
Version Information
Status: Stable
Created 2014-11-04
Last Updated 2015-05-25

Color control... nice addition!

dodo99x said:
Color control... nice addition!
Click to expand...
Click to collapse
Nice work, but androidfilehost dont work

Works fine for me

Can the op be updated to say what roms this will / won't work with? Will it work on CM11 or is it only for TW roms? Thanks!

jimbob_sf said:
Can the op be updated to say what roms this will / won't work with? Will it work on CM11 or is it only for TW roms? Thanks!
Click to expand...
Click to collapse
It's for TouchWiz only

Hi @civato . Can i flash this kernel on SM-p901 ?? it's the same as SM-P900 and both of them are exynos and the only difference is that SM-P901 has sim card slot and 3G capability ! would you please compare the kernel sources of sm-p900 and sm-p901 and if they are the same , i flash it on my SM-p901 ?? Thanks.

francesco totti said:
Hi @civato . Can i flash this kernel on SM-p901 ?? it's the same as SM-P900 and both of them are exynos and the only difference is that SM-P901 has sim card slot and 3G capability ! would you please compare the kernel sources of sm-p900 and sm-p901 and if they are the same , i flash it on my SM-p901 ?? Thanks.
Click to expand...
Click to collapse
You can always flash it, no harm will be done. However, it might be that some settings of the 3G capability is integrated in the kernel, and you will loose this. There is no verification in the kernel if you flash it on the right device. If there are any issues, just restore your stock rom.

13/11/2014 Release Rev2.9:
13/11/2014 Release Rev2.9:
ARM NEON Activated now
Samsung Hotplug service tweaked and adjusted in Synapse
F2FS & Battery control removed
Min Screen ON frequency is now set at 177MHz by the hotplug driver
CIFS supported fixed ( my bad , forgot some stuff in the ramdisk)
Tip:
Use the Screen option in synapse and enable register hook & the edge enhancement and see a real sharp image.

I just flashed this latest kernel and running great, I have a question about enable register hook and edge enhancement I did this and everything looks dull / washed out is there any other settings under the screen options I need to change?

Awesome work!
Thanks for the kernel! awesome
By the way with the lastest kernel i have still experimenting some lags. Is there a way to disable the synapse tool?
This happend me constantly so ist's a bit uncorfortable when i am writing and the tablet freezec for a moment (3 seconds)
thanks in advance

Keep getting signature errors, and cannot install
Hi, I tried to install this kernel, but keep getting signature errors, and it reverts back to restore.
I wiped cache, and all, and seem to be stuck. Is there any way to make a tar file for odin? I don't have Linux , and changing the extension only corrupts it.
I would like to change the stock kernel on my smp900, as the knox counter tripped with kies, and Samsung voided my warranty for (new tablet :crying: - even sent it in and they didn't reset it, after the had admitted it was a problem)
If you can't make it a tar file for odin, what is best to use to install this?
Thanks

19/11/2014 Release Rev3.0:
19/11/2014 Release Rev3.0:
Samsung Hotplug service tweaked and adjusted in Synapse

Can you make this kernel specifically for SM-T900? (TabPro12.2 WiFi)
I've flashed this kernel in my T900 because they're almost the same except for the Pen software and feature and every thing worked smooth and excellent but "rotation" breaks down, it doesn't work even on apps so no tilt function. Hope to hear an answer Thanks. It runs so smooth that I want some of the butter for my Behemoth Tablet lol

this should not be labelled as stable. it's the one and only kernel I've used that crashes n sometimes it will reboot while sometimes it needs to be done manually
about 3 to 5x a day on 8 to 10 hours of use a day

saruba said:
Can you make this kernel specifically for SM-T900? (TabPro12.2 WiFi)
I've flashed this kernel in my T900 because they're almost the same except for the Pen software and feature and every thing worked smooth and excellent but "rotation" breaks down, it doesn't work even on apps so no tilt function. Hope to hear an answer Thanks. It runs so smooth that I want some of the butter for my Behemoth Tablet lol
Click to expand...
Click to collapse
SM-T900 uses different hardware for screen rotation, can't make it work with this kernel.

Sterist said:
this should not be labelled as stable. it's the one and only kernel I've used that crashes n sometimes it will reboot while sometimes it needs to be done manually
about 3 to 5x a day on 8 to 10 hours of use a day
Click to expand...
Click to collapse
Not having it , your problem not mine. Running 24/7 stable. At 2.1GHz and 677MHz gpu.
so before *****|ng you should probably learn how to logcat and see what is causing your problem.
so this should be labeled as stable, you on the other hand?

Sterist said:
this should not be labelled as stable. it's the one and only kernel I've used that crashes n sometimes it will reboot while sometimes it needs to be done manually
about 3 to 5x a day on 8 to 10 hours of use a day
Click to expand...
Click to collapse
I have to agree with the previous poster - your experience is not typical. I have installed this kernel every time a new one is released and it gets more and more stable with every release.
You need to look at the tweaks you have made and what apps you have installed.
Asking for help and hints would be far more productive than a hit and run.

civato said:
Not having it , your problem not mine. Running 24/7 stable. At 2.1GHz and 677MHz gpu.
so before *****|ng you should probably learn how to logcat and see what is causing your problem.
so this should be labeled as stable, you on the other hand?
Click to expand...
Click to collapse
Have you considered building this kernel for the P905. Not sure if it is possible without having the specific device on-hand. Regardless, sounds like you have been able to improve performance for the P900 - congratulations on your work. Hope you have Happy Thanksgiving if you participate in turkey day activities.

civato said:
Not having it , your problem not mine. Running 24/7 stable. At 2.1GHz and 677MHz gpu.
so before *****|ng you should probably learn how to logcat and see what is causing your problem.
so this should be labeled as stable, you on the other hand?
Click to expand...
Click to collapse
Works great for me as well. No issues here, over clocked and undervolted.

[KERNEL][AOSP][7.0] N4-Revival for nougat r02 [2016-10-09]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lean, stable and buttersmooth.
These shall be the characteristics of my REVIVAL kernel for the Nexus 4 (MAKO).
Why should I use this kernel in my Nexus 4?
The "revival" kernel aims at bringing new life into your worn out NEXUS phone and is meant for those who prefer basic tweaking. This kernel will be the more conservative project, as I plan to put only the essential stuff into it like just a few governors and hotplug drivers, gamma control, UV, dt2w and some other basic stuff..
Note: This kernel is made for Android 6.0.1 (Marshmallow) and maybe later versions (who knows).
Features:
Linux 3.4.112 based on the latest sources of Semaphore kernel by Stratos Karafotis (Big thanks)
Removed lots of useless debugging and logs. Added tweaks/optimizations for increased performance. Some of the tweaks were hand-picked from kernels like Quanta-Mako (thanks zaclimon), TaUrUs_Kernel (thanks txuki2005), Unleashed (thanks ion-storm), kernel-Nexus4 (thanks motley-git), thunderzap (varunchitre15) and Mirage (thanks mgr666)
Compiled with the latest Cortex-A15 optimized UberTC 5.4.1 with some kernel based optimizations: graphite, NEON
Compatible to all Android 6.x ROMs based on AOSP and CM (incl. BeanStalk of course)
MultiROM compatible (Kexec patch)
ARM auto_hotplug (thanks thalamus; enhanced by motley) removed in r02
Alucard-hotplug (Alucard24)
AutoSMP-hotplug (Mgr666)
Dyn_hotplug set as default (stratosk)
mako_hotplug (franciscofranco)
msm-sleeper: upgrade to version 2 (flar2): allows to set a max screen off frequency
Linaro power oriented workqueues (thanks mrg666 & franciscofranco)
CPU Governors: ondemand (tweaked by stratosk; default), stockdemand (for those who like it stock and battery-friendly), yankdemand (a more battery-friendly derivative of ondemand), conservative, interactive (tweaked by franciscofranco), performance, userspace, powersave, elementalX (flar2), hellsactive (hellsgod), smartmax (maxwen)
GPU Governors: conservative, ondemand, performance, interactive (franciscofranco), simple (faux123)
GPU Overclocking (up to 487.5MHz) and ultra low IDLE frequency (27MHz)
IO schedulers: cfq, deadline, noop, sio, tripndroid
Customized in-kernel thermal solution smart scaling, dynamic polling, and configurable throttle temp
Gamma control by faux123 (with nougat r02) / gamma control by franciscofranco (marshmallow r03 until r08)
Dynamic management of dirty page writebacks (Christopher83)
Earlysuspend: speedup late resume (faster wakeup of the device)
Relaxed power savings from NVIDIA
Motorola MSM mcmcpy enhancements
Userspace CPU & GPU Voltage Control
Speaker Amp & Sound Control (faux123)
USB force fast charging (Chad Froebel/faux123)
DT2W/power suspend support and Touch wake (stratosk)
Exponential brightness driver (stratosk)
USB-OTG Support (ziddey/faux123)
Knobs for Arch Power and Gentle Fair Sleepers
Knobs for controlling wakeups: bluesleep, bluedroid_timer, wlan, sensor_ind and msm_hsic_host
Qualcomm Slimbus driver incl. tweaks
Partial-resume framework & quickwakeup driver
AIO optimization from Linux 3.8+ (faux123)
Tested on the following ROMs:
* Pure Nexus (AOSP)
* BeanStalk (CM-13 based)
Known issues (marshmallow release):
* Changing CPU governor to yankdemand, stockdemand or hellsactive doesn't work on latest Purity ROM, Resurrection Remix M v5.7.2, CM-13 and possibly on further CM-13 based custom ROMs. Therefore avoid those governors or your phone will freeze-in and then goes into a soft reboot.
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this Kernel before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Download:
Nougat releases (only AOSP for now):
N4-revival-nougat-r01.zip
N4-revival-nougat-r02.zip
Latest release for marshmallow:
N4-revival-marshmallow-r08-AOSP-UBERTC-5.4.zip
N4-revival-marshmallow-r08-CM-UBERTC-5.4.zip
Older releases:
>HERE<
Installation:
1. Wipe cache/dalvik cache
2. Flash kernel zip over stock kernel of the ROM
3. Wipe cache/dalvik cache again (optional)
4. Reboot system
Change Log:
r01 (2016-06-25)
* Initial release
r02 (2016-06-26)
* Replace auto_hotplug with mako_hotplug
* Added extra franco tweaks: use unbound wq, run the main work only once every second if special cases apply, increase the work schedule time when dual-core or quad-core mode is active, from 1 to 2 seconds
* Added 27MHz GPU idle frequency
* Added sensor_ind wakeup knob
r03 (2016-07-10)
* Revert squashed sound control commits and add back faux123 original sound control v3.6
* Add franciscofranco's gamma control
* [backport] Hotplug thread infrastructure
* softirq: Use hotplug thread infrastructure
* rcu: Yield simpler
* rcu: Use smp_hotplug_thread facility for RCUs per-CPU kthread
* Merge July bulletin fixes (thanks @txuki2005)
r04 test build (2016-07-17)
From Franco's release for Hammerhead:
- WiFi driver: improved battery life, performance & security updates
- cpufreq: interactive: set timer_rate to 60ms on screen off (previously 50ms)
- cfq-iosched: improvements
From Franco's release for Flo (thanks zaclimon):
- Performance improvements
- Faster boot up
r05 (2016-08-01)
* Sound: automatic gain control: increase max gain
* Enabled kernel AIO optimization from Linux 3.8+ (faux123)
* Upstream fixes from flo kernel (31st July)
* Reduce log spam messages
* I/O Boost (dorimanx) and optimizations (binder, futex, mutex, rtmutex)
* Added CPU governor stockdemand (unmodified version; for those who like it stock and battery-friendly)
Changes taken over from r04 test build:
* From Franco's release for Hammerhead:
- cpufreq: interactive: set timer_rate to 60ms on screen off (previously 50ms)
- cfq-iosched: improvements
* From Franco's release for Flo (thanks zaclimon):
- Performance improvements
- Faster boot up
r06 test (2016-08-06)
* Power-efficiency: series of power efficiency patches from NVIDIA
* Many tweaks for stability and to reduce lags/improve battery life
* Enable quickwakeup driver
* AIO: Optimization for SSD-only machines
* Security patches: crypto: arm/aes update NEON AES module to latest OpenSSL version
* RAM optimizations: enable KSM and KSM check page
* Disable OOB interrupt when WLAN is off
* dyn_hotplug: optimize it for decreasing lag and better sound quality (Credits @quentin2260)
* Ramdisk: new defaults: enable KSM; Decrease GPU default frequency to 200MHz to save energy (thanks zaclimon); CPU: Disable by default the 3rd and the 4th core; add script to reduce logcat spam: powerhal and disable mpdecision / thermald.
r07 (2016-08-12)
Addresses all of the r06 test (2016-08-06) changes as well as the following:
* Security update: Fix CVE-2016-5340 (Quadrooter Vulnerability)
* Compiled with -03
* Add CPU governor: yankdemand (a more battery-friendly derivative of ondemand)
* Add GPU governor: simple (faux123)
* Updated the kernel installer script to reduce logcat spam (powerhal) and to disable mpdecision / thermald
r08 (2016-08-14)
Addresses all of the r07 changes as well as the following:
* Rebased the kernel in order to leave faulty stuff behind as quite a few changes were in contradiction to battery-life and fluidness
* Added Improved framebuffer imageblit function
* Add toggle to control software CRC
* Here is a quick overview of what has been left behind: Linaro-power efficient wq, timer upstream updates and smp related updates)
r01 for nougat (2016-10-08)
* Initial AOSP compatible release with focus on Android 7.x (even though previous builds already worked in nougat ROMs)
* Remove toggleable software crc (potential reason for data loss and reboots)
* Set default i/o scheduler to NOOP for smoother boot animation and an increased overall performance
* Set max readahead value to 256KB (Fair enough for a bit more performance without sacrificing latency)
* Reintroduce Linaro-power efficient wq from Kernel 3.10 (directly picked from franciscofranco's hammerhead kernel)
* Add Latest Version of Alucard HotPlug (allows for energy savings)
* mako_hotplug: don't use an unbound wq (reverted a few things to better cope with our mako)
* mako_hotplug: use more accurately fitting defaults for mako (default CPU freq unplug limit: 1242MHz / default load_threshold: 70% for a slightly increased performance boost)
* cpufreq: interactive: remove hispeed_freq init restriction. How dare you to force me not to 'disable' hispeed_freq? (Thanks franciscofranco)
* DT2W: fire a small vibration when device is woken up (Ported from franciscofranco's shamu kernel)
r02 for nougat (2016-10-09)
* Replace franco's gamma control with the one by faux123
* Remove CPU governors being incompatible with this kernel (hellsactive, stockdemand, yankdemand)
* Introduce intelliactive CPU governor by faux123
Credits:
Special thanks to
- AOSP
- stratosk
- hellsgod
- zaclimon
- txuki2005
- yoinx
- Cl3Kener
- franciscofranco
- faux123
- eng.stk
- stratosk
- show-p1984
- mrg666
- Defconoi
- neobuddy89
- flar2
- CallMeAldy
- AK
- DespairFactor
- motley
- thalamus
- yank555-lu
- Tk-Glitch
- Christopher83
- yank555-lu
- and anyone else who is not listed here, but deserves my gratitude!
And thank you very much for your donation :good:
- @r4yN
XDA:DevDB Information
Nexus 4 Revival, Kernel for the Google Nexus 4
Contributors
spezi77
Source Code: https://github.com/spezi77/kernel_msm
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r02
Stable Release Date: 2016-10-09
Current Beta Version: r01
Beta Release Date: 2016-10-08
Created 2016-06-25
Last Updated 2016-10-08

Kernel tweaks illustrated

In order to use the tweaks included into this kernel, you can use:
1. KernelAdiutor-Mod (updated 2016/11/20):
--> My personal build which allows to select the semaphore dt2w profiles (exclusive feature not yet supported in the build by David 617)
--> KA-Mod build by David 617 which will provide the latest updates at some point in time
2. or install Synapse.

@spezi77, can you change min GPU freq to 27MHz and include mako hotplug in next build if it isn't ask much.
Btw, phone is smoother than ever now. Thanks, bro!

Cristiano Lira said:
@spezi77, can you change min GPU freq to 27MHz and include mako hotplug in next build if it isn't ask much.
Btw, phone is smoother than ever now. Thanks, bro!
Click to expand...
Click to collapse
I have expected that you will ask for something like mako hotplug.
I will consider it. Anyway, I have already prepared a few of the cpu governors for being used with it. I have seen quite a few variations of Franco's mako hotplug. Not sure yet, which would be the best choice.
Sent from my mako using XDA Labs

spezi77 said:
I have expected that you will ask for something like mako hotplug.
I will consider it. Anyway, I have already prepared a few of the cpu governors for being used with it. I have seen quite a few variations of Franco's mako hotplug. Not sure yet, which would be the best choice.
Sent from my mako using XDA Labs
Click to expand...
Click to collapse
You know me. I think the one used in Hellspawn is nice. And one thing I would like to report is that min cpu cores online setting from auto hotplug seems to not be working, at least in ka-mod.
Edit: tryed synapse and with it the situation is worse: there is not even a checkbox to activate auto hotplug.

@ spezi77 May I know the reason for another Kernel by you

knm1574 said:
@ spezi77 May I know the reason for another Kernel by you
Click to expand...
Click to collapse
1. Hellspawn is for hardcore tweakers cause it's got an insane amount of features and "Revival" has a limited amount for even better stability.
2. "Hellspawn" is based on "hellscore" while "Revival" is based on "semaphore". So they're 2 different kernels.
If you know that you'll tweak every single value of the kernel, or want to have those options there just in case, then Hellspawn is the kernel you want to use. But if you want to do some basic tweaking, "Revival" is the best for you.
Cheers !
Sent from my Nexus 4 using Tapatalk

Does kernel supported F2FS ?

darkmatterx said:
Does kernel supported F2FS ?
Click to expand...
Click to collapse
No, it doesn't. But don't worry. There's no improvement using f2fs, in any department. It's placebo. The benchmarks may show slightly better results but in real world use, the phone behaves exactly the same, it gives the exact same performance and battery life. That's the reason both Stratosk and Hellsgod didn't even bother adding f2fs to their kernels.
Sent from my Nexus 4 using Tapatalk

Cristiano Lira said:
You know me. I think the one used in Hellspawn is nice. And one thing I would like to report is that min cpu cores online setting from auto hotplug seems to not be working, at least in ka-mod.
Edit: tryed synapse and with it the situation is worse: there is not even a checkbox to activate auto hotplug.
Click to expand...
Click to collapse
Hum, I just had a look into the min/max cpu cores online setting. The problem does not originate from the kernel tweaker app(s). The app just reads and writes values from/into the sysfs path, and I didn't find any logical issues here. So, the min/max online cpus feature seems to be implemented in a slightly hacky way..
As of now, I have no idea how to improve this without getting a big headache.. :silly:
Simplest solution would be to ditch auto_hotplug and replace it with mako hotplug. :angel:
Edit: BTW, I did a fresh build (r02) with mako hotplug and 27MHz idle GPU freq.

Flashed today - everything looks nice and smooth so far. A think that its a little more stable and fast than HellSpawn
However I don't get all those colour profiles - where is my favourite alucard8888 and Mohit Galaxy Kehlu Mod?
I can't find the perfect colour settings

The kernel looks very nice @spezzi77. The only thing that's missing, is the gamma control from Hellspawn. The stock control doesn't really give us any tweaking options. I'm used to "Obsanity Amoled" so I can't really go without it or at least be able to tweak it the way I prefer. I'll be waiting for that to be added. Other than that, you should not add anything else cause everything is nice and stable this way.
Sent from my Nexus 4 using Tapatalk
---------- Post added at 01:24 AM ---------- Previous post was at 01:21 AM ----------
Jakub_Z. said:
Flashed today - everything looks nice and smooth so far. A think that its a little more stable and fast than HellSpawn
However I don't get all those colour profiles - where is my favourite alucard8888 and Mohit Galaxy Kehlu Mod?
I can't find the perfect colour settings
Click to expand...
Click to collapse
At the moment the kernel has Stratosk's gamma control which is very close to the stock one. Franco's control is what we want for us to be able to change profiles or tweak them. I'm sure spezzi will add that in a future build.
Sent from my Nexus 4 using Tapatalk

Glad to hear that!
Oh and one more thing - dunno if anyone else noticed that/has that bug/feature
LED notification sometimes is pulsing with all rainbow colours instead of those that are set in my ROM. I remember that happening on some kernel - but right now I can't remember which one

@spezi77, I'm feeling that battery is worse in r02 in comparison with r01, I was having some good results with r01 despite using ondemand and dyn with 2 cores min but now with r02 it's not that good even using smartmax. Thanks for your commitment.

Kernel Auditor got a new sweet material design update!!! OMGGGG

sidnoit22 said:
Kernel Auditor got a new sweet material design update!!! OMGGGG
Click to expand...
Click to collapse
The beta?
Sent from my Nexus 4 using Tapatalk

dragos281993 said:
The beta?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yeah man the Beta.

Any recommendations for good balance between battery life and performance :
CPU governor
I/O scheduler
GPU governor
Max GPU 487 MHz? Not too much...
Or stay like it is...
Wysłane z mojego Nexus 4 przy użyciu Tapatalka

sidnoit22 said:
Yeah man the Beta.
Click to expand...
Click to collapse
Yeah, it looks nice.
Sent from my Nexus 4 using Tapatalk

[KERNEL][N/MM/LP] Fuse-Kernel 3.10.107 For Android One 1st Gen

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on ThunderZap​
Features:
Upstremed to latest Linux Kernel 3.10.107
ThunderCharge Fast Charge Driver (enabled by default)(AC and USB current increased to 1000mA)
ThunderPlug CPU Hotplug replacement
exFAT support
Optimized SLUB
char: Add Frandom
Asynchronous Fsync: initial extraction of Async Fsync from
Overclocked CPU
Some some more minor tweaks
power: wakeup: add wakelock toggles
ThunderSonic Sound Control Engine
WiFi Power management control
Full GPU control
DoubleTap2Wake and Sweep2Wake
Dynamic Fsync Control
Improved filesystem mounting flags - NOATIME and NODIRATIME
ThunderQuake Engine 1.0 - Vibration Intensity Controller for MTK vibrators
Huge update to kernel.org mainline 3.10.89
init.d support
Automatic busybox installation
Disabled Gentle fair sleepers
Enabled arch power
Optimizations to SLUB memory allocator
Patches to block and mm to significantly improve ssd IO performance.
Dynamic entropy setting based on usage
Dynamic management of dirty page writebacks
block: Added SIO IOScheduler
block: Add BFQ IOScheduler
block: Add fiops scheduler
cpufreq: ThunderX power saving CPU governor
fs: added Samsung's F2FS support
Reduce logger device RAM allocation to 128K
Set MM Linux read ahead size to 256K
Patches from upstream to optimize memory writeback
Disabled CRC check in MMC for 30% extra performance with IO
Reduced VFS cache pressure for better battery
Optimized square root algorithm
Governors enabled: ondemand, interactive
Speedup /proc/net/unix interface access
Mali GPU cache Optimizations
Mali: Increase L2 cache max read size
Mali: Disable state tracking
Mali: Reduce GPU utilization timeout
Mali: increase kernel memory buffer size
Aggressive multicore power savings
ARM: Cortex A7 compiler optimizations
MTK: removed HUGE HUGE trail of stupid MTK kernel logging
ARM: Removed various debug traces
Requirements:
Must be on LP/MM/N based ROM (any ROM)
A custom recovery (TWRP, CWM, CTR) should be installed
How to flash:
Download the zip file of kernel from given below link
Boot your device into recovery mode
Select Kernel zip file
Flash the zip
Reboot
Downloads:
OverClocked
Non OverClocked
Sources:
Kernel Source
Changlog:
2017-09-06
exFAT support
Optimized SLUB
char: Add Frandom
Asynchronous Fsync: initial extraction of Async Fsync from
Overclocked CPU
Some some more minor tweaks
2017-09-01
Upstremed to latest Linux Kernel 3.10.107
ThunderCharge Fast Charge Driver (enabled by default)(AC and USB current increased to 1000mA)
power: wakeup: add wakelock toggles
XDAevDB Information
Fuse Kernel For Android One 1st Gen,Kernel for the OEM Cross Device Development
Contributors
@SamarV-121 @varun.chitre15
Source code: https://github.com/SamarV-121/fuse_kernel_google_sprout
Created 2017-09-01
Last Updated 2017-09-01

Is the thunder charge feature required to be used as a daily driver or only when we are in hurry to charge our device. Does it harms device hardware
. If it doesn't why Also can anyone share the experience using this kernel If it really optimises device performance and battery.
Simply Curious to know :laugh::laugh:
Sent from my Xiaomi Redmi Note 4 using XDA Labs

Thanx @Infra.Red for giving new hopes to sprout for experimenting nougat on this device in terms of new ROMs and kernel. Also thanx for kernel upstreamed to latest Linux kernel 3.10.107. It really decreased charging time and enhance battery power duration

Nikish21 said:
Is the thunder charge feature required to be used as a daily driver or only when we are in hurry to charge our device. Does it harms device hardware
. If it doesn't why Also can anyone share the experience using this kernel If it really optimises device performance and battery.
Simply Curious to know :laugh::laugh:
Sent from my Xiaomi Redmi Note 4 using XDA Labs
Click to expand...
Click to collapse
Thundercharge is completely safe. I've been using it for more than a year(since released) and there are simply no issues. Just avoid using phone while charging cuz it'll generate more heat
And yeah, it is much better than stock kernel :laugh:

utiwari914 said:
Thundercharge is completely safe. I've been using it for more than a year(since released) and there are simply no issues. Just avoid using phone while charging cuz it'll generate more heat
And yeah, it is much better than stock kernel :laugh:
Click to expand...
Click to collapse
Thanks @utiwari914
So I am currently on AOSP Extended By @Infra.Red v4.5. which is working great with some known bugs. My Usage is Very Simple: Most of the time it in locked without any usage. Some Occasional Calls And Bit Browsing, Google Maps and Wifi Connected Most of the Time and Also Sync(Google Photos). But Battery backup is not that great. So What Configuration of the Kernel like Governor, Other Settings would you suggest to Use.
Thanks in advance. :good::good::

Nikish21 said:
Thanks @utiwari914
So I am currently on AOSP Extended By @Infra.Red v4.5. which is working great with some known bugs. My Usage is Very Simple: Most of the time it in locked without any usage. Some Occasional Calls And Bit Browsing, Google Maps and Wifi Connected Most of the Time and Also Sync(Google Photos). But Battery backup is not that great. So What Configuration of the Kernel like Governor, Other Settings would you suggest to Use.
Thanks in advance. :good::good::
Click to expand...
Click to collapse
Use this with ThunderPlug with following settings for Max power savings. This will slightly affect the UI smoothness.
Hotplug Threshold: 85%
Touch Boost: Off
Laziness: 750ms
Endurance Mode: Dual Core
:good:

Not working as expected ...
Battery backup got worse, juice keeps on falling even when screen is off .....also .....no change in charging time !...any suggestions for me ?!

mr.nobodie said:
Not working as expected ...
Battery backup got worse, juice keeps on falling even when screen is off .....also .....no change in charging time !...any suggestions for me ?!
Click to expand...
Click to collapse
Simply Installing A Kernel Won't Improve Battery Life. You need to tweak it's settings to your liking and requirement. For Me I am using Thunderzap Control (You can use any). I have set Governor- Thunderx and thunderplug settings mentioned in previous post by @utiwari914. I works Great. Standby is damn good on AEX v4.5. Juice Doesn't keep falling when screen is off. It don't use Thunder Charge Because I am never in a Hurry To Charge My device and quite OK with Charging Time.

Thread closed.

[Kernel][Tissot][Oreo][P][Treble & Non-Treble][OC]eXtremeKernel V12 for MI A1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unleash The Power with the new eXtremeKernel V12
​
Afraid to install that high performance 3D Game because your device just won't take it ? ,Want to rock Asphalt Legends on Ultra Graphics? Got no time to charge your device on the run?
Or Maybe You Just Want to Embrace your Device Reborn. Behold!. "The eXtreme kernel" .. here to lift your desire for performance and battery beyond limits and measures.. and to the "eXtreme" you deserve more than" Stock ". you deserve "eXtreme" . unleash the true power of your device like never before, while you can. why live the stock life when u can go all the way "extreme!!".
​
-Latest Linux Version (3.18.124)
-Latest Wi-Fi driver (LA.UM.6.6.r1-09700-89xx.0)
-Latest Caf Tag (LA.UM.6.6.r1-09700-89xx.0)
-Compactible with Custom Roms (Treble/NonTreble Oreo and Pie),Stock Rom
-Compiled with Google Toolchain
-Auto Detect zip Treble and Not treble
-CPU OC to 2764 Mhz
-CPU Underclock to 345 Mhz
-Undervolt by -75 mV
-Undervolt some regulators for better battery life
-GPU OC to 1166 Mhz
-Adreno Idler
-DTS Eagle
-Audio Codec Tweaks
-HI-FI Mode
-Sound Control
-2500ma Fast Charge and USB Fast Charge (enable it on Kernel Aduitor)
-PowerSuspend
-Thermal Config by TheHitMan7
-Enhanced State Notifier
-F2FS Support
-Spectrum Support
-Fsync on/off support
-Boeffla Wakelock blocker
-Intelliactive CPU Governor
-Zzmoove CPU Governor
-Impulse CPU Governor
-Optimized Interactive Governor
-Maple IO Scheduler
-Fiops IO Scheduler
-SIO IO Scheduler
-Anxiety IO Scheduler
-Optimized CFQ IO Sched
-Optimized Deadline IO Sched
-and original ones
-KCAL color control
-Lot of TCP Algorithms (cubic,reno,bic,yeah,hybia...)
-Vibration intensity control for qpnp-haptics interface
-300 Hz Timer for best Battery and Performance
-Included OC Damage and Voltage Protection
-Added support for exfat and enabled ntfs.
-Optimized and Upstreamed ZRAM
-Optimized Boot Time
-Optimized Opening Apps Delay
-OPtimized ZRAM
-Updated binder and sdcardfs drivers
-Some Network Speed Tweaks
-Incresed GPU power lvl to 20
-Some essential patches that you can also find in Google kernels
-and Lot of more small Optimizations
​
Get it from our Download Center
OLD BUILDS
You can Donate with pressing Donate to Me Button or just VIsit this link
Development Group
Release Channel
OffTopic Group:​
XDA:DevDB Information
[Kernel][Tissot][Oreo][P][Treble & Non-Treble][OC]eXtremeKernel V12 for MI A1
Contributors
Alek Dev, Cheewaca, TheHitman
Source Code: https://gitlab.com/Cheewaca/Tissot_49_LS
Version Information
Status: Stable
Current Stable Version: 12.0
Stable Release Date: 2018-03-27
Created 2018-03-28
Last Updated 2018-11-14

Q: What ROMs are supported?
A: Custom Roms with and without Treble Support and Stock Roms
Q: Do my Soc will be damaged if i use OC?
A: No,All values are tested and safe
Q: What Governor to choose?
A:Read about them below
Cultivation
Description
A highly modified interactive-based governor with the intention of giving the user more control by providing more tuning options. Based on CAF 4.4 commits with parts coming from blu_active and XDA user Sultanxda.
ZZmoove
Description:
The ZZmoove Governor by ZaneZam is optimized for low power consumption when the screen off, with particular attention to the limitation of consumption applications in the background with the screen off, such as listening to music. The unique feature with ZZmoove is that it has predefined profiles and allows profile switching.
Blu_active
Description:
A governor developed by eng.stk (featured in his Code_Blue kernels) based on interactive with upstream caf patches and ondemand governor bits too. This governor is mainly focused on performance like the other things the developer creates but it is also well balanced for gaming and general usage.
Impulse
Description:
An improved version of interactive modified by neobuddy89. Impulse aims to have a balance between battery and performance just like interactive but has some tweaks to save battery.
​

Nice another kernel! Good work! Thankyou!

Thanks Man

More Features and Optimizations coming soon this is just begging[emoji41]
Sent from my Mi A1 using Tapatalk

Awesome mate.

Thanks. I want try maybe nexr update

wifi did not work. (can not enable)

Is it possible to add "click camera pic with fp sensor" function?

laihenyi said:
wifi did not work. (can not enable)
Click to expand...
Click to collapse
Working fine here.
Without problem.

All cores in 2016MHz
help, please

tiagokinder said:
help, please
Click to expand...
Click to collapse
For what ?

All cores in 2016MHz, in any cpu governor. CPU min freq don't change
All cores in 2016MHz, in any cpu governor. CPU min freq don't change

Double Tap to wake where find?

More choices in using a Kernel. This is great!

seinas said:
Double Tap to wake where find?
Click to expand...
Click to collapse
it's activated by default
Sent from my Mi A1 using Tapatalk

all 8 CPU core runs continuously at 2GHz

Alek Dev said:
Reserved Post
Click to expand...
Click to collapse
Thanks! Waiting for OC.

thankssss

DroiDMester said:
all 8 CPU core runs continuously at 2GHz
Click to expand...
Click to collapse
Its not normal??