So i have successfully installed a custom recovery on my phone running Marshmallow and also unlocked the bootloader!
Its quite simple actually!
I am not responsible for any damage you make to your phone!
Steps-
1. Download the zip file from the link and extract it.
2. Install both the drivers and then proceed!(The drivers are universal and work for Windows 98,xp,vista,7,8,8.1,10 but in 8,8.1,10 you might need to turn off the digital signature verification-Make good use of google)
3.After installing the drivers , connect your phone in switched on and remember to turn on usb debugging in the dev options!
4. Open the unlock_bootloader_... and run the .bat file and follow the on screen steps( All the data will be formatted so make a backup beforehand)
5.After doing this you will void your warranty so make sure you know what you are doing!
6. Open the one click installer folder and replace the recovery.img with any recovery that you want.
7. Now again connect your phone in switched on mode and usb debugging on and run the .bat file of recovery installer.. and follow the on screen steps!
8.As soon as the the recovery installation is over do not let teh phone reboot just press the vol up button as the installation process stops and then go to recovery!
9.Boom!! Now you have a phone with unlocked bootloader and a custom recovery installed on marshmallow!!
10.Flash custom Kernels,Boot Animations, Logos and root your phone running marshmallow and brag!
Downloads--
Bootloader and Recovery.zip(27.4 MB)
Press Thanks:good: if this helped and if you have any querries just use the section below!
Recovery Kernel?
Hi bro just a quick question did you use the MM kernel in the custom recovery?
On our None AOSP standard Mediatek devices the rom does a Kernel check to ensure both the boot and recovery Kernels are of the same version eg KK boot = KK Recovery LP boot = LP Recovery so I just wondered if the MM Kernel still works in the Philz recovery or are you still using a kernel from a older version of android eg KK or LP.
Hope that makes sense to you :laugh:
How to open the unlock_bootloader ??? There is no such option
how about rooting? what method did you use?
bigrammy said:
Hi bro just a quick question did you use the MM kernel in the custom recovery?
On our None AOSP standard Mediatek devices the rom does a Kernel check to ensure both the boot and recovery Kernels are of the same version eg KK boot = KK Recovery LP boot = LP Recovery so I just wondered if the MM Kernel still works in the Philz recovery or are you still using a kernel from a older version of android eg KK or LP.
Hope that makes sense to you :laugh:
Click to expand...
Click to collapse
Actually i didn't work on the recovery, i just made the one click thing, i inserted any random recovery i found working on 6.0 .
cheeze.keyk said:
how about rooting? what method did you use?
Click to expand...
Click to collapse
i flashed a custom kernel and then the super su beta zip
akash.kotwani said:
How to open the unlock_bootloader ??? There is no such option
Click to expand...
Click to collapse
in the zip you will find a .bat file, open that and follow on screen instructions
How to relock bootloader if I ever want to?
net_freak said:
How to relock bootloader if I ever want to?
Click to expand...
Click to collapse
Well i did not make anything that can do that but you'll probably find it in other threads. You can also flash bootloader.using the stock rom file via sp flash tools to relock it just untick everything else but bootloader!
Unlocking bootloader is necessary? Can I not just do it with it locked bootloader?
net_freak said:
Unlocking bootloader is necessary? Can I not just do it with it locked bootloader?
Click to expand...
Click to collapse
You can but unlocking the bootloader opens up many other things for devs!
divyesh bansal said:
You can but unlocking the bootloader opens up many other things for devs!
Click to expand...
Click to collapse
Will the fastboot method to flash twrp work ? I'm on Android 6.0
net_freak said:
Will the fastboot method to flash twrp work ? I'm on Android 6.0
Click to expand...
Click to collapse
Yes it does, the tool is also all about it. In the one click recovery intaller folder replace the recovery.img with your twrp(you will have to rename twrp.img file to recovery.img) and follow the steps in the first post in this thread!
divyesh bansal said:
Yes it does, the tool is also all about it. In the one click recovery intaller folder replace the recovery.img with your twrp(you will have to rename twrp.img file to recovery.img) and follow the steps in the first post in this thread!
Click to expand...
Click to collapse
Thanks. . can I use all in one tool kit by @Faiyaz5yaz for the same
Related
I have xperia zr with 4.4.2 official rom that is rooted and it's bootloader is unlocked. I dont have rocovery. all of the recovery need to be flash with recovery!
just I found xzrecovery that when i press istall recovery said ''remount system fail'.
and ZR-lockeddualrecovery2.7.124-BETA.installer that i install from pc in debug mod. it need root . all instalation step seemed ok but steel no recovery.
how can i have a recovery?
ayene said:
I have xperia zr with 4.4.2 official rom that is rooted and it's bootloader is unlocked. I dont have rocovery. all of the recovery need to be flash with recovery!
just I found xzrecovery that when i press istall recovery said ''remount system fail'.
and ZR-lockeddualrecovery2.7.124-BETA.installer that i install from pc in debug mod. it need root . all instalation step seemed ok but steel no recovery.
how can i have a recovery?
Click to expand...
Click to collapse
ZR-lockeddualrecovery2.7.124-BETA.installer is for locked bootloaders. read OP before doing anything otherwise you will brick your phone.
You can flash recovery kernel. see in dev forum
recovery
sourabhp said:
ZR-lockeddualrecovery2.7.124-BETA.installer is for locked bootloaders. read OP before doing anything otherwise you will brick your phone.
You can flash recovery kernel. see in dev forum
Click to expand...
Click to collapse
my phone does not start in recovery mode...
so what can i do?my phone was flashed.and not installed any rom.
Dev patel said:
my phone does not start in recovery mode...
so what can i do?my phone was flashed.and not installed any rom.
Click to expand...
Click to collapse
which ROM you are using? custom roms come with recovery.
roms
sourabhp said:
which ROM you are using? custom roms come with recovery.
Click to expand...
Click to collapse
cyanogenmod 11 for htc
Dev patel said:
cyanogenmod 11 for htc
Click to expand...
Click to collapse
CM11 Rom for HTC on Xperia ZR? how would that work?
ayene said:
I have xperia zr with 4.4.2 official rom that is rooted and it's bootloader is unlocked. I dont have rocovery. all of the recovery need to be flash with recovery!
just I found xzrecovery that when i press istall recovery said ''remount system fail'.
and ZR-lockeddualrecovery2.7.124-BETA.installer that i install from pc in debug mod. it need root . all instalation step seemed ok but steel no recovery.
how can i have a recovery?
Click to expand...
Click to collapse
use [Nut]'s recovery from here http://nut.xperia-files.com/
this is the latest link for our device from it's official http://nut.xperia-files.com/?dlid=WlItbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjE1NC1CRVRBLmluc3RhbGxlci56aXA=
sijav said:
use [Nut]'s recovery from here http://nut.xperia-files.com/
this is the latest link for our device from it's official http://nut.xperia-files.com/?dlid=WlItbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjE1NC1CRVRBLmluc3RhbGxlci56aXA=
Click to expand...
Click to collapse
@sijav isnt NUT's recovery for locked BL? correct me.
sourabhp said:
@sijav isnt NUT's recovery for locked BL? correct me.
Click to expand...
Click to collapse
what's differences between BL and UL for you guys?
UL can flash kernel.
BL cannot flash kernel!
what's recovery?
some binary files that should be called before calling and starting system so it's pretty good to start in kernel before trying to start system.
but what if we can't modify the kernel?
yet we can modify the system and put some binary files in stock chargemon (when the phone trying to figure whether goes to offline charging or not) so it starts first in whole system and wait for a key, if pressed just execute the recovery!
so again, can something that specifically build for LB be flashed or run on UB?? my answer is mostly yes.
can something that needs flashing kernel or other things than system and data on LB? my answer is mostly NO
is [NUT] recovery for both ub and lb? yes! if you don't have recovery on kernel. ( or else you have two recovery one in kernel and one in system and 3 seconds delay in each starting nothing else)
Hey,
You want to revert to stock recovery?
You are on wright thread
Download This Zip File And unzip it (use 7zip)
Download zip | dev-host
Place Stockrecovery img in sdcard And Flash It From CWM/TWRP/PHILZ or use mobile uncle tool
Boot into recovery and you will get stock recovery
Press THANKS button
Buy Me a drink (donate)
SMARTY BOY said:
Hey,
You want to revert to stock recovery?
You are on wright thread
Download This Zip File And unzip it (use 7zip)
Download zip | dev-host
Place Stockrecovery img in sdcard And Flash It From CWM/TWRP/PHILZ or use mobile uncle tool
Boot into recovery and you will get stock recovery
Press THANKS button
Buy Me a drink (donate)
Click to expand...
Click to collapse
Will this work with Micromax Canvas A1 also ??
iremofaisal said:
Will this work with Micromax Canvas A1 also ??
Click to expand...
Click to collapse
Its posted in the android one group so I think it should work with an android one phone.
What do you think?
akhilnarang said:
Its posted in the android one group so I think it should work with an android one phone.
What do you think?
Click to expand...
Click to collapse
is it working with canvas a1 ?
srikantrn said:
is it working with canvas a1 ?
Click to expand...
Click to collapse
Yes
Sent from my A1 using XDA Free mobile app
After flashing the imei lost or something blunder happen with phone pls tell yr i have canvas a1
ashesshubham said:
After flashing the imei lost or something blunder happen with phone pls tell yr i have canvas a1
Click to expand...
Click to collapse
Had you created a backup with custom recovery?
Yes
ashesshubham said:
Yes
Click to expand...
Click to collapse
Ok. Which custom recovery did you use to create the backup?
Just boot into recovery and restore from the backup you created .
But bro i have locked bootloader and unrooted stock rom backup but iwant ota update when it realse and someone stock recovery important for that
ashesshubham said:
But bro i have locked bootloader and unrooted stock rom backup but iwant ota update when it realse and someone stock recovery important for that
Click to expand...
Click to collapse
Okay. You can try the steps below:
1) Unlock bootloader
2) Flash custom recovery
3) Root your phone
4) Boot into recovery and restore from there
5) Reboot your phone to see if the problem is solved.
If the problem that you were facing is solved then
6) Full unroot you device
7) Reflash stock recovery
8) Relock the bootloader *
Done! And now, you will be able to install the OTA updates .
--------
*If you are not rooted and have stock recovery in your phone already, I don't think locking your bootloader is necessary to install the OTA updates.
----
Please "thumbs up" if I helped.
Bro i dont have stock recovery ihave custom recovery and iam on stock rom un rooted and locked oem so i want know that i will receive ota in my phone
ashesshubham said:
Bro i dont have stock recovery ihave custom recovery and iam on stock rom un rooted and locked oem so i want know that i will receive ota in my phone
Click to expand...
Click to collapse
No. But you will be able to download the OTA updates but it will not be installed on your phone.
Installing OTA updates require Stock Recovery.
You need to unlock your bootloader and then flash the stock recovery for your phone.
So how i install stock recovery bro pls tell
ashesshubham said:
So how i install stock recovery bro pls tell
Click to expand...
Click to collapse
Alright. I will upload the required tools and stock recovery by tomorrow evening.
Yes bro do that a great help bro pls upload bro and jusy post a rply a great help bro
How did you flash custom recovery with locked bootloader???
Sent from my A1 using XDA Free mobile app
Follow the instructions below.
1) Backup all your important data
2) Download the zip file from the attachment and extract it into a folder of your choice
3) Enable USB Debugging on your phone and connect it to your PC via USB cable
4) Open the folder where you extracted the downloaded attachment
5) Run "Unlock Bootloader.bat" file. Follow the on-screen instructions. This will unlock your bootloader and will factory reset your phone. Your phone will now reboot automatically.
6) Go to Settings >> About Phone >> Tap on Build Number 10 times >> Go back to Settings >> Developer Mode >> Allow USB Debugging . A pop-up message will appear on your screen asking you to confirm USB Debugging from your PC. Tap on Allow.
7) Now, connect your phone again by enabling USB Debugging mode.
8) Run "Recovery Installer.bat" from the extracted folder. Now, your phone has stock recovery (for Micromax Canvas A1). Your phone will now reboot automatically.
9) Again, Run "Lock Bootloader.bat" file from the extracted folder. This will relock your bootloader.
---------------------
Now, your bootloader is locked and you have stock recovery in your phone. You can confirm this by booting your phone into recovery.
Now, you'll be able to install the OTA Updates.
DONE!
Moreover the official image file here: Android One Stock Recovery.img (KitKat) can be used to flash the stock recovery from fastboot mode or using flashify app in rooted phone.
nope that dosent work
iremofaisal said:
Okay. You can try the steps below:
1) Unlock bootloader
2) Flash custom recovery
3) Root your phone
4) Boot into recovery and restore from there
5) Reboot your phone to see if the problem is solved.
If the problem that you were facing is solved then
6) Full unroot you device
7) Reflash stock recovery
8) Relock the bootloader *
Done! And now, you will be able to install the OTA updates .
--------
*If you are not rooted and have stock recovery in your phone already, I don't think locking your bootloader is necessary to install the OTA updates.
----
Please "thumbs up" if I helped.
Click to expand...
Click to collapse
been there done that that but it can't install
Hi guys, today I am going to share this simple tutorial on how to root without unlocking bootloader of sprout.. Many people asked me how to do so I am here to create a simple tut for everyone..
Requirements
1. Any custom recovery for sprout (I prefer philz http://forum.xda-developers.com/cro...e-general/sprout-philz-touch-v6-57-9-t2887574 )
2. Fastboot files (google for minimal fastboot) and fastboot drivers
3. Supersu update zip (http://download.chainfire.eu/supersu)
Proceedure
1. Install fastboot drivers and fastboot files..
2. Rename the custom recovery as "recovery.img"
3. Place the recovery.img within fastboot directory (where the fastboot.exe located)
4. Put supersu.zip in root of your phone's sd card
5. Connect your android one device to pc using usb cable in fastboot mode (switch off phn and press power+vol up and then select fastboot)
6. Use the following fastboot command
Code:
fastboot boot recovery.img
This command will not flash the recovery, it will just let your phone boot into recovery and it will work on locked bootloader
7. You will get the recovery menu then. Install the previously downloader supersu.zip from external sd card using the recovery menu.
8. Congratulation, You have successfully rooted your android one device without unlocking bootloader...:good:
Here is a video guide created by @thesaurabh7777, u can check it..
https://www.youtube.com/watch?v=DxlowF80deY&list=UUAWTixiBL7GqKAZB5OLAwDA
Credit
1. @varun.chitre15 for custom recovery
2. @Chainfire for supersu.zip
thanks
Thank you. Just what i wanted.
Anyone tried? And how to unroot if needed ?
UPDATE : I tried. It works and works like charm. I have created CWM backup of my stock ROM, rooted device and installed xposed also.
You can always unroot from settings in SuperSu - Which essentially removes itself and su binaries.
coolkoushik07 said:
Hi guys, today I am going to share this simple tutorial on how to root without unlocking bootloader of sprout.. Many people asked me how to do so I am here to create a simple tut for everyone..
Requirements
1. Any custom recovery for sprout (I prefer philz http://forum.xda-developers.com/crossdevice-dev/android-one-general/sprout-philz-touch-v6-57-9-t2887574 )
2. Fastboot files (google for minimal fastboot) and fastboot drivers
3. Supersu update zip (http://download.chainfire.eu/supersu)
Proceedure
1. Install fastboot drivers and fastboot files..
2. Rename the custom recovery as "recovery.img"
3. Place the recovery.img within fastboot directory (where the fastboot.exe located)
4. Put supersu.zip in root of your phone's sd card
5. Connect your android one device to pc using usb cable in fastboot mode (switch off phn and press power+vol up and then select fastboot)
6. Use the following fastboot command
Code:
fastboot boot recovery.img
This command will not flash the recovery, it will just let your phone boot into recovery and it will work on locked bootloader
7. You will get the recovery menu then. Install the previously downloader supersu.zip from external sd card using the recovery menu.
8. Congratulation, You have successfully rooted your android one device without unlocking bootloader...:good:
Credit
1. @varun.chitre15 for custom recovery
2. @Chainfire for supersu.zip
Click to expand...
Click to collapse
This method applicable for moto G??
after rooting using this methord can i install cwm recovery without unlocking the bootloader? i want to backup my rom
austinpinto said:
after rooting using this methord can i install cwm recovery without unlocking the bootloader? i want to backup my rom
Click to expand...
Click to collapse
U can but u need flashable zip of recovery.. And u can backup and restore ur rom by booting into custom recovery too..
Sent from my Xperia Z1 Compact
coolkoushik07 said:
U can but u need flashable zip of recovery.. And u can backup and restore ur rom by booting into custom recovery too..
Sent from my Xperia Z1 Compact
Click to expand...
Click to collapse
can i boot into custom recovery and backup my entire rom without root or unlocking the bootloader?
austinpinto said:
can i boot into custom recovery and backup my entire rom without root or unlocking the bootloader?
Click to expand...
Click to collapse
Yes u can
Sent from my Xperia Z1 Compact
archies20 said:
This method applicable for moto G??
Click to expand...
Click to collapse
Please dont quote whole op...
And no, it will not work in moto..
Sent from my Xperia Z1 Compact
successfully rooted but how to check weather boot loader is locked r unlocked,with root can i get ota update(if the provide any in the near future )r else should i have do any thing to lock bootloader... thank you bro for the tut...:good::good:
how to unroot?
Can the device be unrooted by simple using the option in SuperSU to receive OTA update?
mknits said:
Can the device be unrooted by simple using the option in SuperSU to receive OTA update?
Click to expand...
Click to collapse
Yes and ota update depends on what modification u have done to ur phn while being rooted..
Sent from my Xperia Z1 Compact
coolkoushik07 said:
Yes and ota update depends on what modification u have done to ur phn while being rooted..
Sent from my Xperia Z1 Compact
Click to expand...
Click to collapse
Hi, if I root my device this way, just to backup some apps via TB, and not modify the system any other way, are you sure just unrooting will be enough to safely apply the Kitkat to Lollipop OTA?
I've read about this new "verified boot" thing in Lollipop, which essentially means if you modify system partition in any way, even if just to add the SU app/binaries, the OTA will fail (where it obviously didn't use to, before lollipop). I'm not sure if this verified boot thing will apply to the OTA for Kitkat to Lollipop too, or just updates From Lollipop to future versions.
(AP did an article just a couple of weeks back, check it out here: http://www.androidpolice.com/2014/1...e-means-update-will-fail-system-modified-way/ )
I have made a backup of Stock ROM before rooting it,so when LOLLIPOP arrives and in case i have changes some system files, i can simply restore the stoock ROM to recieve the updates right???
Rahil S said:
I have made a backup of Stock ROM before rooting it,so when LOLLIPOP arrives and in case i have changes some system files, i can simply restore the stoock ROM to recieve the updates right???
Click to expand...
Click to collapse
Yes u can.. In fact I also did the same..
Sent from my Xperia Z1 Compact
coolkoushik07 said:
Yes u can.. In fact I also did the same..
Sent from my Xperia Z1 Compact
Click to expand...
Click to collapse
Thanks.
And even if i unlock bootloader, flashing the stock rom back with lock the bootloader again right or do i need to do it manually???
Rahil S said:
Thanks.
And even if i unlock bootloader, flashing the stock rom back with lock the bootloader again right or do i need to do it manually???
Click to expand...
Click to collapse
If u unlock bootloader, u have to lock bootloader manually after flashing stock rom..
Sent from my Xperia Z1 Compact
coolkoushik07 said:
If u unlock bootloader, u have to lock bootloader manually after flashing stock rom..
Sent from my Xperia Z1 Compact
Click to expand...
Click to collapse
I have not unlocked bootloader just rooted it. Now do i need to flash stock rom back or removing supersu will make it stock?? I have only used SuperSu and link2sd app. Will be very helpfull if you can guide me. Thanks
Rahil S said:
I have not unlocked bootloader just rooted it. Now do i need to flash stock rom back or removing supersu will make it stock?? I have only used SuperSu and link2sd app. Will be very helpfull if you can guide me. Thanks
Click to expand...
Click to collapse
Yes it will
Sent from my Xperia Z1 Compact
Nice
---------- Post added at 04:16 PM ---------- Previous post was at 04:15 PM ----------
Good work
So today I embarked on what seemed to be a fruitless journey as I tried to root the Infinix Hot 2 on the latest build (December Security Patch of course) and I observed the following:
1. Flashing TWRP Recovery that was previously made for this device doesn't Flash. SP/Infinix Flash Tool flashes the recovery quite alright but booting to recovery with ADB afterwards gives a "No command" screen.
2. Kingroot (PC & Mobile) can't root this device as of yet :'(
3. I think the bootloader can be unlocked using the Android One Toolkit that was created for 1st Gen Android One devices. Reason being the fact it booted to fastboot and prompted me with the option to accept bootloader unlock or not.
Should you come come successful with flashing recovery or rooting this latest build, please comment your method. Thank you...
Link to Android One Toolkit:
http://forum.xda-developers.com/crossdevice-dev/android-one-general/toolbox-android-one-toolkit-one-click-t3030165
recovery partition is protected, it will get back to stock recovery if you boot the system. so you really need to boot recovery as the first thing you do after flashing.
which because of the similar bug we can't unlock our bootloader, is impossible to do with default setting. flash your lk partition with this:
http://www80.zippyshare.com/v/X4etwppD/file.html
taken from: http://forum.xda-developers.com/hot-2/development/android-one-rom-recovery-twrp-root-sp-t3227682
sabcpj said:
recovery partition is protected, it will get back to stock recovery if you boot the system. so you really need to boot recovery as the first thing you do after flashing.
which because of the similar bug we can't unlock our bootloader, is impossible to do with default setting. flash your lk partition with this:
http://www80.zippyshare.com/v/X4etwppD/file.html
taken from: http://forum.xda-developers.com/hot-2/development/android-one-rom-recovery-twrp-root-sp-t3227682
Click to expand...
Click to collapse
Thanks I will try this in the morning...
One more question... Does this mean after flashing recovery I can boot directly into TWRP using key combo?
iAmWiz said:
Thanks I will try this in the morning...
One more question... Does this mean after flashing recovery I can boot directly into TWRP using key combo?
Click to expand...
Click to collapse
yes, you should be. and you need to
Alright then
sabcpj said:
yes, you should be. and you need to
Click to expand...
Click to collapse
there is no scatter file for the lk-recovery.. I do not think I can flash it directly with Flash Tool without the scatter file
iAmWiz said:
there is no scatter file for the lk-recovery.. I do not think I can flash it directly with Flash Tool without the scatter file
Click to expand...
Click to collapse
why do you think you need another scatter file. you already tried flashing twrp right? use that one. then change the location of partition named "lk" to point this file. that's all.
sabcpj said:
why do you think you need another scatter file. you already tried flashing twrp right? use that one. then change the location of partition named "lk" to point this file. that's all.
Click to expand...
Click to collapse
Alright. If I cannot get a workaround on this, I'll just Flash Infinix 5.1 ROM and wait till M
Try using towel root
https://towelroot.com/
Mysteryagr said:
Try using towel root
https://towelroot.com/
Click to expand...
Click to collapse
Thanks but towelroot didn't work out.
Root achieved... More at
http://forum.xda-developers.com/hot-2/development/root-recovery-xposed-successfully-t3276420
please can you help me sp flashtool stuck at 0 and nothing happens
ATTENTION!
You MUST read all the guide BEFORE doing it, if you do it without reading all of it first you may ends up bricking your phone!
Prerequisites:
Asus ZE500KL (may work on ZE500KG, but haven't tested, do it on your own risk) on Marshmallow, NOT LOLLIPOP!
Also, it must have fully booted AT LEAST one time, otherwise, you'll soft-brick it.
If your phone is not on Marshmallow, you can use THIS guide insteadDownload and put the unlocker zip file and the SuperSu zip file in the phone
How To:
1 - Install adb and fastboot driver (follow THIS guide)
Now you can connect the phone to your computer2 - Reboot in fastboot mode with one of the following method:
a -Volume Up while booting upb -With adb, after enabling USB debugging in developer settings, using:
Code:
adb reboot bootloader
Now that you are in bootloader, you have to boot in TWRP,
download THIS recovery (is the twrp one) and boot in to it, using this command:
IMPORTANT: DON'T FLASH IT OR YOU WILL GET BOOTLOOP!!!
Code:
fastboot boot TWRP-x-x-x-x.img
(Obviusly the recovery name must be the one you downloaded)
IMPORTANT: DON'T FLASH IT OR YOU WILL GET BOOTLOOP!!!
It should automaticaly enter in recovery.
Now you MUST flash FIRST ZE500KL_BootloaderUnlock.zip, otherwise you'll brick your phone
Btw, the recovery will mount your phone's memory, so you can put now the files in the phone, if you forgot to do it before
AFTER you installed the unlocker zip, you can install the SuperSu zip
When the install is complete, clear the cache and reboot your phone, now you can enjoy your root!
Downloads:
Latest @MiauLightouch TWRP - 3.0.0.2 Mirror
Latest SuperSu zip - 2.65 Mirror
Bootloader Unlocker (from @MiauLightouch original post) - Mirror
Credits:
@MiauLightouch for pretty much everything
@LuK1337 , @luca020400 and everyone on #titandev for being awesome
So.. I'm thinking of buying a ZE500KL and I've been doing some reading on this phone on the forums.. did it really just get unlocked like yesterday? does that mean custom roms from now on?
MuzgontarAco said:
So.. I'm thinking of buying a ZE500KL and I've been doing some reading on this phone on the forums.. did it really just get unlocked like yesterday? does that mean custom roms from now on?
Click to expand...
Click to collapse
I would recommend Z00L/T, you will get cm13, official unlock at least.
You Say " May Work On ZE500KG" Is ze500kg already receive Marshmallow Update?
MiauLightouch said:
I would recommend Z00L/T, you will get cm13, official unlock at least.
Click to expand...
Click to collapse
thanks for the advice but my choices are poor with about 5 phones in this price range with this one looking waay better.. getting it via contract so yeah..
How to install supersu zip? Tia.
Working! Have you tried to flash Viper4Android? On lollipop this will break Call recording and FM Radio, maybe this will not be a problem on MM?
Seanjhon027 said:
How to install supersu zip? Tia.
Click to expand...
Click to collapse
Inside TWRP there is a big "Install" button, press it and select the zip
what is the meaning of booted
mohamedelkholy said:
what is the meaning of booted
Click to expand...
Click to collapse
context?
until you saw the lock screen, that's what "booted".
stuck waiting for device
C:\Users\Clynt\Desktop\Android M>adb reboot bootloader
C:\Users\Clynt\Desktop\Android M>fastboot boot twrp.img
< waiting for device >
Ok I don't know where I get wrong but I got this error.
Img file name is ok because I renamed it.
Drivers were installed already.
Developers mode is enabled already.
Windows 7 64bit
Tried rooting this using lollipop and everything went well.
thanks!
UPDATE: i got it. it has something to do with the drivers.
Without opening the bootloader.
Notice. I have not tried it.
http://www.asus-zenfone.com/2016/05/how-to-root-asus-zenfone-2-laser-ze50kl-marshmallow.html?m=1
thanl you man i have rooted my zenfone 2 laser
Thanks very much for this guide and your work.
Can I install the new update v13.10.7.1 when I opened bootloader.
The twrp recovery is temporary or permanent? If permanent how to go back to stock recovery? Tia
thanks
thks TS
now my phone its rooted
Muminek111 said:
Without opening the bootloader.
Notice. I have not tried it.
No... when trace a perequisite link Given..
you really need to unlock bootloader first
wulfe13 said:
The twrp recovery is temporary or permanent? If permanent how to go back to stock recovery? Tia
Click to expand...
Click to collapse
i think isnt permanent, this step is needed to boot into twrp then flashing a unlockBL..
to make permanent.. the command must "fastboot flash recovery twrp_X.X.X.X.img"
but make sure to unlock bootloader first...
CMIIW
Click to expand...
Click to collapse
Is it me or everytime I reboot the device after rooted, it's going back to unrooted?
Root is a success tho, great job, OP!
Edit: okay, not every reboot, but after several reboots, then it went back unrooted