So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Sonicboom9004 said:
So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Click to expand...
Click to collapse
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
xmayhemreturnsx said:
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
I've downloaded the T-mobile 5.1.1 version because I have not found a MetroPCS version. I hope that is the version I had before.
I downloaded it from here: http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387 (the first link)
EDIT: Currently going to try this out. I'll let you know if it works or not: http://forum.xda-developers.com/tmo...x-recovery-seandroid-enforcing-error-t3144011
EDIT 2: Doesn't work it just says md5 file invalid. Binary Check Failed.
EDIT 3: FIXED MY PHONE I just used the latest version of 5.1.1. Thanks for pointing me in the right direction xmayhemreturnsx. Link for the latest version for anyone else who needs help:http://forum.xda-developers.com/tmo...firmware-g920tuvu3doi1-g920tuvu2doh6-t3213001
Related
This is resolved (I simply pulled battery, and tried again.)
Hello,
Quick backstory. Prior to the last OTA from ATT I could actually get, I had used towerlroot and everything worked fine. I then updated and lost root(naturally). Now I could not get my S5 to OTA to the most recent update (currently running G900AUCU2ANG3) and tried to use ODIN to flash the original Stock firmware. This process failed. Any suggestions on how I can start over?
Edit to add:It is soft bricked now. Can only load into the "Kies" recovery screen
Here is ODIN output: <ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Leon
Hi All
ATM I have a bootloop but can connect using Odin to flash.
I was on Nameless ROM
Having trouble finding ANY suitable roms in .md5.tar format
Any help would be great, dont wanna lose this little beauty
HB
Hamsterboy2000 said:
Hi All
ATM I have a bootloop but can connect using Odin to flash.
I was on Nameless ROM
Having trouble finding ANY suitable roms in .md5.tar format
Any help would be great, dont wanna lose this little beauty
HB
Click to expand...
Click to collapse
Would it be ok to ask a ROM DEV to make a version I could flash with Odin?
Hamsterboy2000 said:
Would it be ok to ask a ROM DEV to make a version I could flash with Odin?
Click to expand...
Click to collapse
Just download stock rom from sammobile.com, extract the .zip then flash the .tar file with odin
Thanks so much
Done alot of flashin but haven't used Odin since I rooted .
Cheers for the advice.....off to SAMMY I go
HB
Ok well everything was going great upto the last few seconds where Odin failed...
Message log was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> tz.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried repeating it but no joy.
Anyone got an idea where I go next?
Cheers
HB
Ok managed to flash Philz_touch and it looked like it's just a matter of choosing a rom on the sd card and installing just like CWM but all the roms fail saying something similar to......
"ApplyParsedPerms: lsetfilecon os /system/lost+found to ubject_r:system_file:s0 failed: Operation not supported on transport endpoint
set_metadata_recursive: some changed failed
E: Error in /external_sd/ROMS/nameless-5.0.2-20150318-i9305.zip
(Status 7)
Installation aborted
press any key to continue"
Is there anything else I can do to get a rom on this device.
Try another ROM maybe?
Cheers for any help
HB
What version of philz are you using? You need to be using one of the latest ones Cwm 6.0.4.4 at least. I only say this because status 7 error is normally because of an outdated recovery.
Sent from my GT-I9305 using XDA Free mobile app
Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Great.
A littlr more information would help us help you.
Which version of Odin, what is failing, what if any messages are Odin or the device giving you?
kvadde said:
Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Click to expand...
Click to collapse
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
The only reason why you would get issues flashing a stock firmware with odin is if the firmware isn't intended for your device.
Odin is quite smart and can prevent you from bricking your device.
I try to flash this one T810XXU1BOH7_T810XAR1BOH7_HOME.tar, Now i have flash custom rom so my tab si working but cant flash to stock rom.
Sorry my bad english :/
lakingslayer said:
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you its work
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
One more with problems when having CM. Try flashing TW ROM and then run Odin with stock firmware. BTW why ur odin is not checking MD5? What file did you download?
shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
hidden.img
recovery.img
sboot.bin
system.img
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Select repartition when flashing stock rom.
Coming out of an old build of Maximum Overdrive from last year, I felt the need to update. Wiped, found base/build epj2, flashed and rooted that. I guess that wasnt the latest build, it think it was released in oct 2016. Had major issues with this firmware, So i rewiped, reflashed epj2, and just let tmobile ota's take over. Now Im on baseband/ build N910T3UVS3EQE2, which is the latest firmware to date.
My problem, flashing twrp does nothing. Im getting no errors in odin, (see text below) when I reboot into recovery after flashing, I still have stock recovery. First time Ive encountered this. If its relevant, Ive tried odin 3.12.3 and 3.12.7, and twrp 3.0.2 and 3.1.1. Im out of ideas at this point, and my searches have turned up nothing related to specifically root issues related to eqe2 firmware.
Any tips would be appreciated Thanks!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
scoogots said:
Coming out of an old build of Maximum Overdrive from last year, I felt the need to update. Wiped, found base/build epj2, flashed and rooted that. I guess that wasnt the latest build, it think it was released in oct 2016. Had major issues with this firmware, So i rewiped, reflashed epj2, and just let tmobile ota's take over. Now Im on baseband/ build N910T3UVS3EQE2, which is the latest firmware to date.
My problem, flashing twrp does nothing. Im getting no errors in odin, (see text below) when I reboot into recovery after flashing, I still have stock recovery. First time Ive encountered this. If its relevant, Ive tried odin 3.12.3 and 3.12.7, and twrp 3.0.2 and 3.1.1. Im out of ideas at this point, and my searches have turned up nothing related to specifically root issues related to eqe2 firmware.
Any tips would be appreciated Thanks!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
Click to expand...
Click to collapse
TWRP Recovery might be Released within a few months for this base, now if you can downgrade to epj2 then do it and redo the twrp if you cant then try to downgrade to 5.1.1 and then upgrade to epj2
I'm on the same build but I'm able to install TWRP and it works. I can even install different versions of TWRP. The problem I have after is no matter what ROM I try to flash after I get either error 7, error 6, or errors about the zip file. When I try to Odin it just crashes. I wonder if this build is more secure than others?
scoogots said:
Coming out of an old build of Maximum Overdrive from last year, I felt the need to update. Wiped, found base/build epj2, flashed and rooted that. I guess that wasnt the latest build, it think it was released in oct 2016. Had major issues with this firmware, So i rewiped, reflashed epj2, and just let tmobile ota's take over. Now Im on baseband/ build N910T3UVS3EQE2, which is the latest firmware to date.
My problem, flashing twrp does nothing. Im getting no errors in odin, (see text below) when I reboot into recovery after flashing, I still have stock recovery. First time Ive encountered this. If its relevant, Ive tried odin 3.12.3 and 3.12.7, and twrp 3.0.2 and 3.1.1. Im out of ideas at this point, and my searches have turned up nothing related to specifically root issues related to eqe2 firmware.
Any tips would be appreciated Thanks!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Are you unchecking Auto reboot befour flashing twrp?...pulling the battery and booting directly into recovery to make it stick?
Hey Everyone,
New to this, so excuse my ignorance, but I was attempting to remove the FRP lock from a tablet E (SM-T377P) I purchased from a few from a company that used them.. Flashed it with stock firmware thinking it would just remove the lock (again, new) and clearly that isn't the case. Did some searching and found some firmware on here that actually put 5.1.1 and since I wasn't thinking, flashed that version on the tablet with odin 3.14. Device now only goes into factory mode and I cannot flash with either the combination file or stock firmware for 6 or 7, getting error Fused 3/Binary 2). Not really sure where to go from here, if anywhere, if there is anyone that could offer any help that would be great. (Not new to computers or tech, so I am pretty literate with any questions).
Odin Error is...
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 2360 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Still looking for some help, thanks!
Update: Was able to find a fix and its working now!