Related
Well most of you already know that NC's USB cable's tip is delicate & today I broke it
I Googled & found that those Non B&N cables take a lot of time compared to original ones. Is it true ? Or Cheap cables also work ?
Some Black Berry phone cables are also similar [USB Hot sync] can I use them ?
Problem is I am from India & importing original cable costs a bomb :-/
they still giving free cable replacement or stopped ? I know they never ship it to India
Cheap cables do not have the necessary extra pins. A cable at B&N is $15. I understand the shipping may be costly but other cables will barely work if at all.
I had great luck repairing mine with super glue. The outer shell had started to crack but did not completely shatter. Super glue bonded the connector shell back together and is holding the plug in place. Your mileage may vary.
B&N definitely need to redesign the connector though.
Sent from my NookColor using xda premium
Check out this http://forum.xda-developers.com/showthread.php?t=1090369
Sent from my NookColor using Tapatalk
avi! said:
Well most of you already know that NC's USB cable's tip is delicate & today I broke it
I Googled & found that those Non B&N cables take a lot of time compared to original ones. Is it true ? Or Cheap cables also work ?
Some Black Berry phone cables are also similar [USB Hot sync] can I use them ?
Problem is I am from India & importing original cable costs a bomb :-/
they still giving free cable replacement or stopped ? I know they never ship it to India
Click to expand...
Click to collapse
I'm from the Philippines, and Barnes&Noble had replaced my NC's USB cable free of charge TWICE now. The original USB cable broke after two weeks of using it. I called them through Skype, which didn't cost me anything. All you need to tell them is that your USB cable broke and you want a replacement. All NC's USB cables are covered by a 1 year warranty. Everyone knows how crappy the NCs USB cables are--even b&n admits it. Once you get them on the phone, all they would ask you is to provide the email you used to register your nook, the shipping address you put in your b&n account, and sometimes they ask you about the last four digits of your credit card if you put it in your b&n account as well. Lastly, of course, the serial no. of your NC which you can find in the NC's box or by logging in your b&n account. Your main problem is that b&n doesnt ship warranty items outside continental US. In my case, I had a friend in the US whom I made as the recipient of the USB cable, and had her ship it in the Philippines.
Sent from my NookColor using xda premium
elherr said:
I had great luck repairing mine with super glue. The outer shell had started to crack but did not completely shatter. Super glue bonded the connector shell back together and is holding the plug in place. Your mileage may vary.
B&N definitely need to redesign the connector though.
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
I totally agree with you, having had to call Barnes to replace my NC's USB cable twice now.
Sent from my NookColor using xda premium
Guys thank you for replying I will try free cable from nook color, will ask my friends....
What is amp rating of Nook cable ? What if I use my iPhone 4's charger with Nokia's mini USB cable ? Will that do ? or any harm ?
I am using the stock charger with Nokia's cable & I think it will take 10-15 hours for a full charge :-/
I also found a black berry mobile's cable whose rating is 0.5A.
Thank you !
Nothing will work, i am also from India. I tried everything, even root level kernel modifications to allow high current charging. In the end had to get a new one, someone here on xda was kind enough to ship it for me though. Seriously xda rocks...!!
What were they thinking when they designed the cable??
Sent from my ADR6350 using Tapatalk
les02jen17 said:
I called them through Skype, which didn't cost me anything.
Click to expand...
Click to collapse
Hey can you tell me how ?
avi! said:
Guys thank you for replying I will try free cable from nook color, will ask my friends....
What is amp rating of Nook cable ? What if I use my iPhone 4's charger with Nokia's mini USB cable ? Will that do ? or any harm ?
I am using the stock charger with Nokia's cable & I think it will take 10-15 hours for a full charge :-/
I also found a black berry mobile's cable whose rating is 0.5A.
Thank you !
Click to expand...
Click to collapse
Nook's AC adapter pumps out 1.9amps, most USB cables and adapters pump out around 1amp(at least most around my house). I can't say for sure how much the cable is rated for but considering the Nook's adapter pumps out 1.9amps I'd say it's about the same. If you don't have the Nook's AC adapter you'll have to use you're computer's USB port.
____________________________________________________
Sent from NookColor CM7 uSD using Tapatalk
I have it's adapter, it is working fine. But cable ? it is broke now. So I have to find a 1.9AMP cable ?
duplicate entry
avi! said:
I have it's adapter, it is working fine. But cable ? it is broke now. So I have to find a 1.9AMP cable ?
Click to expand...
Click to collapse
The Nook's cable is pretty much proprietary when it comes to charging(notice it isn't your average micro usb plug on the end). Normal micro usb cables work fine for data transfers and trickle charging(ie: takes forever to charge and will actually continue to loose charge if you use the Nook while charging) In the end I'd look into a way to get the official cable. If you aren't in the US you might try looking elsewhere online or ask someone here on XDA if they'd be kind enough to forward the package.
____________________________________________________
Sent from NookColor CM7 uSD using Tapatalk
I have everything planed out for my tab install for my Dodge Magnum. But since the Nexus 7 doesnt have a sd slot I need to find a cable that can charge the tablet and use my flash drive at same time.
My flash drive(Usb on dash, so its easily removable)
http://www.amazon.com/gp/product/B00812F7O8/ref=ox_sc_act_title_4?ie=UTF8&smid=ATVPDKIKX0DER
Plugging this into the usb otg cable
http://www.amazon.com/Black-4-Port-...qid=1348442221&sr=8-3&keywords=4+port+usb+hub
I would love host cable with 2 usb inputs but cant seem to find it and dont know if its even possible.
Any help would be appreciated.
I found this on the bay : item # 140839631580 (Can't post link I'm too new... I was a lurker for a while -_-)
i didn't think the N7 could support power and OTG
You want it for video or audio? You could try a wifi solution for audio. Or be the guy that gets the pins to work.
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
I have no clue what im doing but this is what im playing with at the moment. Its a old dock for sgs2 i believe but it has a dc and usb input on the back of it.
Im about to this because i have very little patience for china.
http://www.amazon.com/gp/product/B008CQKM2U/ref=ox_sc_act_title_1?ie=UTF8&smid=A24Y22QERZZ9SS
Would get the cheaper one but the juiced one has a flexible cable vs the fixed usb on the other one. Would this be pointless though?
Unfortunately OTG sends ground up the sense pin to trigger host mode. Once activated it sends 5V DOWN the USB cable to power your USB devices. Trying to send voltage up the cable at the same time to the Nexus would not be a good idea. The only way around it I can think of would be to hack the firmware to only activate the data pins in host mode and keep the power circuit seperate, then you could power the USB device from a modified dock/hub which sends power up the USB cable to the device.
A lot of work, and without the powered hub, OTG would be useless!
In the long run wouldn't it be easier to just plug in the power lead when needed and have the otg in the rest of the time? (or vice versa). It would mean you having to have easy access to the usb port but I can't see an easy non technical solution to connecting both at once.
Don't use the Nexus 7 for a car install. You can get an Acer Iconia A100 with a full-size USB port to connect to whatever external storage solution you want, and it's usually about the same price or cheaper than the Nexus 7.
earlyberd said:
Don't use the Nexus 7 for a car install. You can get an Acer Iconia A100 with a full-size USB port to connect to whatever external storage solution you want, and it's usually about the same price or cheaper than the Nexus 7.
Click to expand...
Click to collapse
Trying to sell tablet now. Going for galaxy tab 2
Sent from my SAMSUNG-SGH-I747 using xda premium
Wouldn't this work?
http://tobuygoods.com/product_info.php?language=en¤cy=USD&products_id=131
I have galaxy tab 2 for sale. Pm me for details...
erica_renee said:
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
Click to expand...
Click to collapse
Would it be possible to charge while using an OTG Cable for Keyboard/Mouse or does the same principle apply as inn data via OTG & charge?
Roland
Sent from my Nexus 7 using Tapatalk 2
Rolandh said:
Would it be possible to charge while using an OTG Cable for Keyboard/Mouse or does the same principle apply as inn data via OTG & charge?
Roland
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Same principle. In normal OTG host mode the tablet powers the peripherals. A USB keyboard/mouse will be no exception to that.
intruda119 said:
I have no clue what im doing but this is what im playing with at the moment. Its a old dock for sgs2 i believe but it has a dc and usb input on the back of it.
Im about to this because i have very little patience for china.
http://www.amazon.com/gp/product/B008CQKM2U/ref=ox_sc_act_title_1?ie=UTF8&smid=A24Y22QERZZ9SS
Would get the cheaper one but the juiced one has a flexible cable vs the fixed usb on the other one. Would this be pointless though?
Click to expand...
Click to collapse
Sorry to resurrect an old thread but was wondering if you ever ended up getting that Juiced systems adapter and if it worked well with the N7. Been looking at it but haven't found any success stories on XDA with the N7, just the few Amazon reviews...
That cable would work but u need specific kernel tweaks for otg + charge to work. Pm me if anyone needs it.
Sent from my Nexus 7 using xda app-developers app
sadde said:
That cable would work but u need specific kernel tweaks for otg + charge to work. Pm me if anyone needs it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Why PM you, why not just put it up here, Anyway here you guys go
http://forum.xda-developers.com/showthread.php?t=1835720
I am interested in this kernel patch quite a bit. I have a galaxy note 2 (sprint version). What are the odds someone has figured out how to get power and otg working on the note 2?
erica_renee said:
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
Click to expand...
Click to collapse
Ofcourse there is charge and otg at the same time by just simply shorting pins 4 and 5 with a resistor,in my case for xperia p , a 100k resistor does it.
Timurs USB ROM from another site is what you want. Has links and everything you need.
I was going to do a car install as well but after sourceing parts and work estimates ( I want clean install, like stock) just more hassle than its worth for me. Please post pics if you get an install going.
Sent from my Nexus 7 using XDA Premium HD app
Can anyone recommend a decent USB OTG that hangs down the side of the nexus 10 rather than sticks out?
Preferably one they've proven to work with an N10.
I appear to have lost my Samsung one I was hoping to use.
Thank you.
Swype'd at pace from my Galaxy S2
I have this one
http://www.amazon.com/gp/product/B005GI2VMG/ref=oh_details_o01_s00_i00
Works perfectly with my thumb drives and external hdd. Not only does it work, but the price was unbeatable.
Don't buy one of those $10+ cables as it does the same exact thing as this one.
I might add, you could possibly look into getting one that can charge the device at the same time it's using an external storage device. Unless you're okay with it.
Stickmount works with root on my devices
Nexus Media Importer works without root on my devices
GNex and N10.
Hope this helps!
Confirmed that my OTG cable works.
sunoryjim said:
Confirmed that my OTG cable works.
Click to expand...
Click to collapse
Can you still get to the headphone jack with that cable?
Is there any long (length wise) USB OTG Cable?
So I can just keep the flash drive or external drive in my messenger bag and use my phone or tablet LOL.
Also will USB 3.0 work with the devices?
Lumsdoni said:
Can anyone recommend a decent USB OTG that hangs down the side of the nexus 10 rather than sticks out?
Preferably one they've proven to work with an N10.
I appear to have lost my Samsung one I was hoping to use.
Thank you.
Swype'd at pace from my Galaxy S2
Click to expand...
Click to collapse
I bought both of these. Both connect with the larger portion of the USB connector towards the screen so they hang down the side of the tablet:
SANOXY Micro USB Host Mode OTG Cable - The connector for this one was flipped from the picture and hangs down the side of my N10.
eForCity Micro USB OTG to USB 2.0 Adapter - This one came just like it was pictured.
Both came from Hong Kong which took about 2 weeks in the mail however they cost just around $1.00 each and with free shipping not much to lose.
I use mine with a elago Mobile Nano II USB 2.0 microSDHC Flash Memory Card Reader and a 32GB card (my 64GB is in my S3). With the adapter in the OTG cable it barely hangs out the bottom and makes it very compact.
I have 2 kinds of OTG cables here, both working perfectly fine with my Galaxy Nexus. However on Nexus 10 when I connect a USB device to the OTG (or connect the OTG cable with a USB device already plugged in) the tablet turns off completly and I have to remove the OTG to be able to start it again.
OK -- Sorry to resurrect a glue'd horse, but does anyone have a link for one that ALWAYS ships the correctly sized (read not too long) OTG adapter? I've already ordered two of the OTG adapters through Amazon but they BOTH have too long of a connector and it basically sits loose in any device. Very lame.
bschrib said:
OK -- Sorry to resurrect a glue'd horse, but does anyone have a link for one that ALWAYS ships the correctly sized (read not too long) OTG adapter? I've already ordered two of the OTG adapters through Amazon but they BOTH have too long of a connector and it basically sits loose in any device. Very lame.
Click to expand...
Click to collapse
I'm looking for one as well. The cheap ones from eBay are too long. They work but the connection is loose. Do NOT buy the ones linked below.
http://pages.ebay.com/link/?nav=item.view&id=300803544652
I bought THIS one from monoprice for $1.43 last week its on its way...ill report back when it arrives. Monoprice stuff is usually pretty good quality, hoping it is nice and secure
http://www.amazon.com/dp/B008CQKM2U/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Has anyone tried this? Says it will work with the Nexus 7 so I'm assuming the 10 as well? Would be nice to have all in one.
Sent from my Nexus 4 using Tapatalk 2
egrims said:
http://www.amazon.com/dp/B008CQKM2U/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Has anyone tried this? Says it will work with the Nexus 7 so I'm assuming the 10 as well? Would be nice to have all in one.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Just an FYI I e-mailed Juiced Systems to see if this would work with the Nexus 10. Their response is below:
The adapter should work with 4 out of the 5 functions for the Nexus 10(MHL maybe not). I have yet to test it out personally. This is something we will test soon and will post online. The nexus 10 does have an HDMI mini port built into it already. If MHL doesn't work that is because google did not think it was necessary to make it MHL capable when it has an HDMI mini port. The Nexus 7 is not MHL capable either, not sure why they chose to do that. I will keep you posted once the nexus 10 testing comes back.
Thank you
sunoryjim said:
Confirmed that my OTG cable works.
Click to expand...
Click to collapse
confirming this one works, and its a really great fit, nice and tight not like the loose too long one.thanks for the link.
productofusa said:
confirming this one works, and its a really great fit, nice and tight not like the loose too long one.thanks for the link.
Click to expand...
Click to collapse
Can you still access the headphone jack with this OTG cable?
Can anyone tell me how an OTG cable can be better than another except of the price/length/design ??
Isn't that micro USB to USB cable just a normal cable connecting 5 pins which are either in a bigger or a smaller plug?
Why should such a cable not work (except of the situation that the cable is damaged)?
xeTaiz said:
Can anyone tell me how an OTG cable can be better than another except of the price/length/design ??
Isn't that micro USB to USB cable just a normal cable connecting 5 pins which are either in a bigger or a smaller plug?
Why should such a cable not work (except of the situation that the cable is damaged)?
Click to expand...
Click to collapse
I watched a video on how to make your own, if it was correct, they stated that one pin was unused and when it is connected to chassis ground tells the device to go into OTG mode.
So this OTG cable is not just connecting each pin? It's not just an adapter?
Okay then, good to know, thank you
lexlucas said:
Can you still access the headphone jack with this OTG cable?
Click to expand...
Click to collapse
If you took a razor knife to the strain relief part it would work, as it is you can stress it out of the way enough to fit a headphone jack but it puts a bit too much pressure on the USB port for my liking try it they're cheap!
i see most are using ones with a cable, is there an issue with ones like these?
http://www.overstock.com/Electronic...l?recSet=4e4a53cb-bea5-4a2e-aec6-88ea05c24288
http://www.ebay.com/itm/90d-right-A...160919848094?ssPageName=ADME:B:EOIBSA:SG:3160
I got 2 of this, works pretty well and sits close to the side of the tablet.
Only 2 issues, the connector itself is long so it's a little loose and it will block the earphone jack.
Has anyone tried this accessory with the GN2? Looks pretty useful, just want to make sure it works without rooting.
amazon . com/Samsung-S2-Multi-functional-Connection-Kit/dp/B006MJZOMW/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353387405&sr=1-2&keywords=Micro+USB+OTG
I have one and it works great. I've only used it for transferring in photos from my digicam and some files from a few thumbdrives, but it's worked perfectly thus far.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
benchi86 said:
Has anyone tried this accessory with the GN2? Looks pretty useful, just want to make sure it works without rooting.
amazon.com/Samsung-S2-Multi-functional-Connection-Kit/dp/B006MJZOMW/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353387405&sr=1-2&keywords=Micro+USB+OTG
Click to expand...
Click to collapse
I have one. No need to root as stock OTG support is fine, but will not read NTFS.
There are a couple issues I have with it used with Note2:
- it will not act as a dock... it will not charge your phone while it powers memory or USB devices.
- it cannot be used with a case, unless you also buy an extension cable... M/F micro USB
- mine feels a little weak, like it might break off in the micro USB port & is intermittent if moved.
It's easier & cheaper to use a OTG cable unless you need to power USB devices... then you could add a hub. If you use a smart dock, you get charging, 3x USB, audio, HDMI.
For the cost, it would have been nice to have it charge as stated for S2.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Thanks for the very helpful info!
benchi86 said:
Has anyone tried this accessory with the GN2? Looks pretty useful, just want to make sure it works without rooting.
amazon . com/Samsung-S2-Multi-functional-Connection-Kit/dp/B006MJZOMW/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353387405&sr=1-2&keywords=Micro+USB+OTG
Click to expand...
Click to collapse
Bought it for use with my Galaxy Note and now use it for my Galaxy Note 2.
Works great (yeah, not with a case on unless you have an extension cable), have used it with SD cards, Keyboard, mouse (yup, puts a mouse pointer on your screen!), external hard drive (but you have to plug in power (usb or wall charger) for that), I have even plugged in my Creative USB headphones and they work great! Awesome device.
If I was to make it, I would put a little sturdier plug on it (see other post for "flimsy feel") and make it so it had a VERY short plug (like a 1/4 inch longer) so it could be used without popping the bottom out of my TPU case).
If someone has a link to a SHORT m-f micro usb extender, SHARE please !!
:good:
rrackman said:
Bought it for use with my Galaxy Note and now use it for my Galaxy Note 2.
Works great (yeah, not with a case on unless you have an extension cable), have used it with SD cards, Keyboard, mouse (yup, puts a mouse pointer on your screen!), external hard drive (but you have to plug in power (usb or wall charger) for that), I have even plugged in my Creative USB headphones and they work great! Awesome device.
If I was to make it, I would put a little sturdier plug on it (see other post for "flimsy feel") and make it so it had a VERY short plug (like a 1/4 inch longer) so it could be used without popping the bottom out of my TPU case).
If someone has a link to a SHORT m-f micro usb extender, SHARE please !!
:good:
Click to expand...
Click to collapse
http://www.amazon.com/Juiced-Systems-MHL-Adapter-MicroSDHC/dp/B008CQKM2U/ref=wl_it_dp_o_pC_nS_nC
HDMI added, and the short extender you want.
Did anyone tried the version with the hdmi?If it works,it could be a good alternative to official smart dock (100$)
It seems that it doesn't charge the note, as per the reviews, when the usb host is used.
I want something that charges it, to use it in the car, sending video to my headrest screens FROM a USB thumb drive. So I'd need USB+HDMI out, plus charging. That would be great to have. But only playing videos from USB drive WHILE CHARGING it would be enough for me. Although there are dongles for the Note 2 that would allow HDMI+Charging, there is nothing AT ALL in the market that would allow USB HOST+Charging capabities. Not an Android phone, not a tablet (other than Toshiba/Acer with USB ports on the side).
johnko1 said:
Did anyone tried the version with the hdmi?If it works,it could be a good alternative to official smart dock (100$)
Click to expand...
Click to collapse
I think MHL will not work because the 11 pin vs 5 pin connector we have like the Galaxy S3
Found this comment on amazon:
This thing is magic! All of these different ports in one simple accessory is brilliant! They don't claim that MHL on this unit works with the Samsung Galaxy S3 and sure enough MHL does not. Everything else does though. Having all of these ports on one small accessory makes the most of any compatible smart phone.
Click to expand...
Click to collapse
But if you also use a Micro USB 5 Pin To 11 Pin (4$ from ebay) I guess it would work
SyCoQC said:
But if you also use a Micro USB 5 Pin To 11 Pin (4$ from ebay) I guess it would work
Click to expand...
Click to collapse
Yes, I'd think so. Still curious about using the USB host while charging.
---------- Post added at 10:52 AM ---------- Previous post was at 10:33 AM ----------
RipplingHurst said:
Yes, I'd think so. Still curious about using the USB host while charging.
Click to expand...
Click to collapse
Maybe not, from the Amazon reviews:
cannot charge and use usb device at the same time.
plug in charger and usb device is disabled.
fails on nexus 7 and galaxy note.
Click to expand...
Click to collapse
Chances that it would work on the Note 2 are slim I fear.
Anyway I will probably get the older version with the card reader and usb port,it is more portable!
http://www.amazon.com/Samsung-S2-Mu...qid=1354305907&sr=1-2&keywords=Juiced+Systems
and when the official smart dock will get cheaper,I will buy it for sure
Found a great angled OTG cable for my Nexus 10 that doesn't block the audio port. http://www.amazon.com/Electronics-Micro-Cable-Nexus-doesnt/dp/B00CHSRKGK/
Exact same as this cable, but angled the other way.
Great company, lifetime warranty, and their original OTG cable has TONS of great ratings on Amazon (I have several and they've never failed, I just lose them. lol). The nexus 10 flavor is the exact same, just goes the other way.
This is the only angled OTG cable I've found that doesn't block the audio port.
Hope this helps!
AspenMan said:
Found a great angled OTG cable for my Nexus 10 that doesn't block the audio port. http://www.amazon.com/Electronics-Micro-Cable-Nexus-doesnt/dp/B00CHSRKGK/
Exact same as this cable, but angled the other way.
Great company, lifetime warranty, and their original OTG cable has TONS of great ratings on Amazon (I have several and they've never failed, I just lose them. lol). The nexus 10 flavor is the exact same, just goes the other way.
This is the only angled OTG cable I've found that doesn't block the audio port.
Hope this helps!
Click to expand...
Click to collapse
Sup.
http://dx.com/p/micro-usb-5-pin-male-to-usb-female-otg-adapter-black-2-pcs-169535
I have the adapter from dx.com too and they are Great... Shipping to Germany costs time but they work and I haven't found a similar adapter in German stores
Great! I was looking for it but didn't find. Thanks for your report.
does it support usb 3G?
Welcome to December 2012.
lKBZl said:
Sup.
http://dx.com/p/micro-usb-5-pin-male-to-usb-female-otg-adapter-black-2-pcs-169535
Click to expand...
Click to collapse
Can you confirm that this does not block the audio port?
I'm sure that's why you posted it but just want to be sure.
Thanks.
Is it possible to connect an external SD-card reader using this cable? Well, I know it is possible, the question is : will it work? Will the nexus 10 mount the SD card?
Which other uses has this adaptor? A keyboard?
supahfly112 said:
Can you confirm that this does not block the audio port.
Click to expand...
Click to collapse
Based on the description and pictures, you get two adapters. One blocks the audio port (save it for another device) and the other doesn't. Looks like an excellent deal for $2.80.
As for me, I prefer the kind with a cable as it would seem to put less stress on the port.
---------- Post added at 04:31 PM ---------- Previous post was at 04:16 PM ----------
flyerdroid said:
Is it possible to connect an external SD-card reader using this cable? Well, I know it is possible, the question is : will it work? Will the nexus 10 mount the SD card?
Which other uses has this adaptor? A keyboard?
Click to expand...
Click to collapse
Yes, SD will work, but if you are not rooted, you will need Nexus Media Importer (https://play.google.com/store/apps/details?id=com.homeysoft.nexususb.importer). If root, you'll want StickMount (https://play.google.com/store/apps/details?id=eu.chainfire.stickmount) instead, as this gives you an actual mounted SD volume.
Depending on ROM, you can connect keyboard, mice, etc. With PA, I can even use a Logitech Universal Receiver and pair up with my various Logitech wireless devices. That said, I prefer to use my Bluetooth keyboard as I avoid abusing the ports when possible.
lKBZl said:
Sup.
http://dx.com/p/micro-usb-5-pin-male-to-usb-female-otg-adapter-black-2-pcs-169535
Click to expand...
Click to collapse
Does this work with the poetic slimline case? How much clearance is there between the body of the adapter and the tablet itself?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
DefinityX said:
Does this work with the poetic slimline case? How much clearance is there between the body of the adapter and the tablet itself?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry for the late response. I don't own this product, i just know someone who bought it. Btw, for it's price, I'd say it's worth a try.