[Kernel Source] [LG-F600] [S/K/L] - LG V10 Android Development

Here the Kernel source for LG-F600 all variants S/K/L
Link

wolfgart said:
Here the Kernel source for LG-F600 all variants S/K/L
Link
Click to expand...
Click to collapse
also here http://opensource.lge.com/osSch/list?types=ALL&search=lgf600

wolfgart said:
Here the Kernel source for LG-F600 all variants S/K/L
Link
Click to expand...
Click to collapse
SO this means AOSP builds are now possible right?

Hopefully as least some cpu governer can be added!

tramane said:
SO this means AOSP builds are now possible right?
Click to expand...
Click to collapse
cm usually has our source merged into, in our case msm8992. We also need to set up the device tree.

Request for a ported CWM recovery for LG-F600 all variants S/K/L, thanks.

Lg v10 f600 l - re-flash
Hai,
i am here for a technical solution,
i live in Dubai, middle east . couple of weeks before i bought an LG V10 online.. (F600L-Korean version). after inserting sim card i found that its seldom receiving incoming calls...when you try calling it says phone is switched off. not always, but most of the times. the rest everything works fine like outgoing calls, sms etc.
when i contacted the store in Hongkong they said its a minor OS issue , can be resolved by re-flashing the device.
Has anyone experienced similar issue?
Is the firmware for above mentioned device available?
Can i go for a self re-flash?
Waiting for your technical guidance...as my phone is still resting in the box.. i want to start using it ASAP
Thanks.

jishadmajeed said:
Hai,
i am here for a technical solution,
i live in Dubai, middle east . couple of weeks before i bought an LG V10 online.. (F600L-Korean version). after inserting sim card i found that its seldom receiving incoming calls...when you try calling it says phone is switched off. not always, but most of the times. the rest everything works fine like outgoing calls, sms etc.
when i contacted the store in Hongkong they said its a minor OS issue , can be resolved by re-flashing the device.
Has anyone experienced similar issue?
Is the firmware for above mentioned device available?
Can i go for a self re-flash?
Waiting for your technical guidance...as my phone is still resting in the box.. i want to start using it ASAP
Thanks.
Click to expand...
Click to collapse
Try to type in 5457#*600# — Multi Band Selection — Check the suitable band frequency for your location — APPLY

ok so io have downloaded the source code... now how to put it in my lg v10 f600l.... sorry im a newibe and im trying to root my phone which i am not able to do so.

hoi_lai said:
Try to type in 5457#*600# — Multi Band Selection — Check the suitable band frequency for your location — APPLY
Click to expand...
Click to collapse
My wifi connection signal very weak my phone model lg v10 f600s i don't know why can you help me
Sent from my LGE LG-F600S using XDA Labs

is there any advancing
i see on the site they included kernel source code for f600x nougat too

Related

[INFO] Roms Fully Sprint Functional UPDATE:01/11/14 fix in second post

Hey guys so this was brought to my attention by another user, @daftlush . Dating back to my OGEvo4g we were conditioned to believe Update PRL/Profile could not be done in AOSP, specifically on Sprint. This was somewhat debunked when the Nexus came out to Sprint because it had this feature in AOSP. @daftlush brought up in another thread asking about this and I assumed like before it just wasnt in AOSP, except Google has it working. So I wanted to compile a list of roms that are fully Sprint functional that include Update PRL/Profile.
First, I noticed on roms where it does work it will finish Activating Data you dont have to press skip. I dont know if it is just a coincidence but the one rom I found this feature actually working, I did not have to hit skip once i saw LTE instead it finished and moved onto the next step.
If you know of a rom where this does work, please list it and I will update the list. I am hoping we can track down the necessary code to get this fully working on all AOSP roms.
UPDATE: 01/11/14
I was able to get the fix from team slim it is located in the second post
UPDATE 01/09/14
Newest Slimkat build has the feature confirmed working. (http://forum.xda-developers.com/showpost.php?p=49278373&postcount=3240)
I have sent a PM to the OP of the AOSPA thread to see if they can work on getting this going as well. Still waiting to hear back from AOKP since the first conversation. Lets help spread this info so we can enjoy our hammerhead! If you can help find the code needed on gerrit please let me know I have been looking but I dont have much experience in reviewing code, if it is found I can update post #2 with the detail for all devs to utilize.
UPDATE 01/06/14
I have passed on this information to a few days and so far, AOKP, SLIM, CNA have stated they will look into the code from Vanir and Cyanogenmod to see what they did in order to get these options working. Slim says it is a current WIP for them and last I talked to someone from AOKP they said they would look into it and we should have it working. CNA also said they would look into it.
Unfortunately OMNI doesnt look to be working on it, I did not get this info from someone on team omni but many posts have stated they dont want to include any closed source items from stock, i didnt know sprint hidden menu and prl/profile updates were closed source but that is unfortunate as I know a lot of us Sprint users would love to run OMNI, but for me no prl/profile updates make it hard to run as a DD (fellow Sprint users probably understand as prl updates sometimes fix our data issue)
Full working on Sprint (Activate data works, Update PRL/Profile works):
Vanir
Cataclysm
Stock Google
Anything based off Stock Image
Cyanogenmod
CM Based Variants
Slimkat (fixed per dev http://forum.xda-developers.com/showpost.php?p=49226687&postcount=3155) / now confirmed working as of 1/9 (http://forum.xda-developers.com/showpost.php?p=49278373&postcount=3240)
BobcatRom - confirmed working (http://forum.xda-developers.com/showpost.php?p=49284722&postcount=18)
AOKP 1/12/14 (http://forum.xda-developers.com/showpost.php?p=49340913&postcount=306)
AOSPA - the fix has been merged but no build put out since then, this is as of 1/11/14 future builds after this date should work (http://forum.xda-developers.com/showpost.php?p=49343381&postcount=303) (http://forum.xda-developers.com/showpost.php?p=49346234&postcount=313 confirmed Update PRL/Profile works as well)
Custom Raskat by @soccerfan6768 (http://forum.xda-developers.com/showpost.php?p=49412543&postcount=2624) he said hell pass on the fix to the raskatdevs for officials
Purity
Sprint data works w/o APN hack, but no update PRL/Profile(once you see LTE icon you must hit skip on activating data):
OMNI
Codename Android
Sprint data works with APN hack only:
PSX
First and foremost I want to give a very big THANK YOU to @cordell12 for putting up with my constant nagging surrounding this subject and to @kufikugel from slimteam for figuring it out. I hope cordell12 doesnt mind me posting their fix.
Per cordell12 "yes, it is blobs. those who do not have it(prl/profile update) working are using blobs from google website. those who do(prl/profile update) are using extracted blobs from stock build/device"
here is a link to the slimteams gerrit with the fix that made it work on their rom: https://gerrit.slimroms.net/#/c/1714/
i was told by another member that this fix also needed to be implemented https://gerrit.slimroms.net/#/c/1717/
Help me spread the word to the devs of non-fully functional roms on sprint.
So i have updated the list again today, CM has it working as do a few others. I am not good with git or code, does anyone know what the commit is that fixes this so i can help spread the word to other devs?
whats the sprint hack?? im on sprint and i always wanted to try rastakat rom
P.Mobile said:
whats the sprint hack?? im on sprint and i always wanted to try rastakat rom
Click to expand...
Click to collapse
The sprint. Zip file that allows you to get past the welcome screen on some roms and have data connection enabled, i few roms will be unusable if you don't flash this after the rom and the gapps,i think
Sent from my Nexus 5 using Tapatalk
On the fully compatible ROMs are you also able to access the Sprint Hidden Dialer Menu(*#*#3282#*#*)? I really hope Sprint users can get full compatibility across all ROMs.
AndrasLOHF said:
On the fully compatible ROMs are you also able to access the Sprint Hidden Dialer Menu(*#*#3282#*#*)? I really hope Sprint users can get full compatibility across all ROMs.
Click to expand...
Click to collapse
The roms that are fully working, have the hidden menu. I just checked for you and it does work, this is only tested on those that PRL/Profile update work!
MY goal of this thread is to figure out what code is missing from the roms so we(sprint users) can enjoy all the goodies.
P.Mobile said:
whats the sprint hack?? im on sprint and i always wanted to try rastakat rom
Click to expand...
Click to collapse
The Sprint hack enables the correct APNs for Sprint so you can have data, otherwise you get no data which makes our phones useless
Just a heads up, Update PRL/Profile is FIXED on SlimKat and will be included in our next Official build :good:
cordell12 said:
Just a heads up, Update PRL/Profile is FIXED on SlimKat and will be included in our next Official build :good:
Click to expand...
Click to collapse
That's great, Thanks. I have a Sprint-purchased Nexus 5 and I haven't ran into any problems so far, which is amazing. I'm glad it's the same phone hardware-wise as the unlocked version.
nerv8765 said:
That's great, Thanks. I have a Sprint-purchased Nexus 5 and I haven't ran into any problems so far, which is amazing. I'm glad it's the same phone hardware-wise as the unlocked version.
Click to expand...
Click to collapse
I really hope this catches on, one device = all providers.
cordell12 said:
I really hope this catches on, one device = all providers.
Click to expand...
Click to collapse
I do too, it's so nice to know that I have the option of going with a prepaid service like T-Mobile or At&t. Basically, anything except Verizon will fully work (and I don't really miss Verizon any.)
thanks to this thread i found about Vanir and will never turn back to anything else!
Tons of great info here, thanks OP!
Thank you cordell for giving us an update!!
I have sent a message to the hammerhead maintainer of AOSPA to see if they will also implement this "fix"
Has anyone been able to see the code from either CM, Slim, or Vanir? I want to update post #2 with that info so the other devs can easily access them.
BobcatRom works flawlessly on sprint, and is an amazing ROM. I highly recommend people to check it out. Its beautiful.
sent from my Hammerhead Nexus
CRIME INC. said:
BobcatRom works flawlessly on sprint, and is an amazing ROM. I highly recommend people to check it out. Its beautiful.
sent from my Hammerhead Nexus
Click to expand...
Click to collapse
can you confirm Update PRL/Profile work?
Circaflex said:
can you confirm Update PRL/Profile work?
Click to expand...
Click to collapse
Yes I can:thumbup:
sent from my Hammerhead Nexus
CRIME INC. said:
Yes I can:thumbup:
sent from my Hammerhead Nexus
Click to expand...
Click to collapse
thanks added to the list
cordell12 said:
I really hope this catches on, one device = all providers.
Click to expand...
Click to collapse
@cordell12: is it at all possible for you to link me to the changes on gerrit that were made to get this feature working, i have receieved answers from a few other rom devs asking me for the code, i tried looking on slimsgerrit but i have no experience in reviewing code and i am not sure what i am looking for exactly. thank you for any help you can provide.

[ROM][4.4.4][UNOFFICIAL] SlimKat Condor [Single Sim Only]

SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimKat, ROM for the Moto E
Contributors
cybojenix
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2014-06-27
Last Updated 2014-06-27
Latest Build
V1.0, SlimKat 4.4.4 Build 6
Mobile data Doesn't work Confirmed
Auto Brightness doesn't work confirmed SlimRoms bug. It's only being polled every 10 seconds.
As far as I know, everything else is fine
I will upload the device folders at a later point closer to when SlimKat goes official for condor.
The kernel is pretty much stock, with minor edits to make camcorder work, and modules load.
Information and Requests
Firstly I'd like to massively apologise for not uploading this till now.
As some of you will already know, I have been somewhat ill due to the amount of work I have been putting in to my projects (no not for moto e).
To make up for this, I am posting a build now as a taster on the aosp qcom sources, rather than the newer caf based qcom sources. It's a daily usable rom, however later builds will have better performance.
I am also releasing a build of cm11 shortly.
XT1022 Is not supported as neither sim will work.
Now for the requests. at some point in the future (a few days, maybe a week), I will need access to the dual sim variant of the Moto E running stock. Ideally I will need access via TeamViewer to a windows or linux based pc with adb already set up, and an unlocked/rooted device that wants cm11.
I repeat.
Dual Sim is coming soon. Please stop asking
Thank you for being patient with me, but it will all soon pay off
from now on, If a question is asked that is answered already in the first page, or the last ten posts, or one that is easy to find with the search bar, please link this post to them.
Yay!! Thanks for your hard work! Will try this tomorrow
Just one question: Dual sim is supported?
Gogeta said:
Yay!! Thanks for your hard work! Will try this tomorrow
Just one question: Dual sim is supported?
Click to expand...
Click to collapse
Please read the third post.
Also SlimRoms does not support dual sim, and has no intention to any time soon.
Thanks for the work
Thanks for the work... can you send me patches for this..
xperiafan13 said:
Thanks for the work... can you send me patches for this..
Click to expand...
Click to collapse
No but I'll say the approach you should take to fix it.
To build, there is an error that shows from qcom/media. To fix that you had to patch a kernel header. Use git to find the commit the definition is made, and that will fix camera.
To fix bt, check the bt loading script in etc. You will notice there are two blobs missing. Running these blobs will show there is another blob missing.
What other bugs do you have?
cybojenix said:
no but i'll say the approach you should take to fix it.
To build, there is an error that shows from qcom/media. To fix that you had to patch a kernel header. Use git to find the commit the definition is made, and that will fix camera.
To fix bt, check the bt loading script in etc. You will notice there are two blobs missing. Running these blobs will show there is another blob missing.
What other bugs do you have?
Click to expand...
Click to collapse
ok thanks... Im check this... Thanks in advance
you rockss!!!
Mobile data
cybojenix said:
Mobile data untested but probably works (can't test as no sim in)
Auto Brightness doesn't work confirmed SlimRoms bug. It's only being polled every 10 seconds.
As far as I know, everything else is fine
I will upload the device folders at a later point closer to when SlimKat goes official for condor.
The kernel is pretty much stock, with minor edits to make camcorder work, and modules load.
Click to expand...
Click to collapse
Mobile data doesn't work, good work on everything else.
Kind Regards.
First of all congrats man
Here are some of the doubts
Since I have a Indian version moto e (dual sim) as per the given information it won't support so my doubt is if I install this ROM will at least one sim work I don't care about other sim and hate dual sim and do I need to replace any files from stock ROM?
Thanks in advance
cybojenix said:
Firstly I'd like to massively apologise for not uploading this till now.
As some of you will already know, I have been somewhat ill due to the amount of work I have been putting in to my projects (no not for moto e).
To make up for this, I am posting a build now as a taster on the aosp qcom sources, rather than the newer caf based qcom sources. It's a daily usable rom, however later builds will have better performance.
I am also releasing a build of cm11 shortly.
Now for the requests. at some point in the future (a few days, maybe a week), I will need access to the dual sim variant of the Moto E running stock. Ideally I will need access via TeamViewer to a windows or linux based pc with adb already set up, and an unlocked/rooted device that wants cm11.
Thank you for being patient with me, but it will all soon pay off
Click to expand...
Click to collapse
I've got the dual sim version.
Also, have team viewer, adb, fast boot, and a rooted stock ROM (not by choice) ready. Let me know when you need access.
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
im always ready to help!!
Hetalk said:
I've got the dual sim version.
Also, have team viewer, adb, fast boot, and a rooted stock ROM (not by choice) ready. Let me know when you need access.
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
cybojenix said:
Firstly I'd like to massively apologise for not uploading this till now.
As some of you will already know, I have been somewhat ill due to the amount of work I have been putting in to my projects (no not for moto e).
To make up for this, I am posting a build now as a taster on the aosp qcom sources, rather than the newer caf based qcom sources. It's a daily usable rom, however later builds will have better performance.
I am also releasing a build of cm11 shortly.
Now for the requests. at some point in the future (a few days, maybe a week), I will need access to the dual sim variant of the Moto E running stock. Ideally I will need access via TeamViewer to a windows or linux based pc with adb already set up, and an unlocked/rooted device that wants cm11.
Thank you for being patient with me, but it will all soon pay off
Click to expand...
Click to collapse
i do have Teamviewer, Windows 8.1 (ADB), Moto E XT1022 (Stock, Rooted, TWRP)
Hetalk said:
I've got the dual sim version.
Also, have team viewer, adb, fast boot, and a rooted stock ROM (not by choice) ready. Let me know when you need access.
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Same as above here ^
Contact anyone of us who are online.
not even single sim working in Moto E XT1022
cybojenix said:
Please read the third post.
Also SlimRoms does not support dual sim, and has no intention to any time soon.[/Q]
woah woaaah woaahhh.... its awwwesommmeeee... loved it but sad thing not even single sim working
atleast make single sim to work!!!
anyway awesome work :good::good::good:
Click to expand...
Click to collapse
iblaziner786 said:
cybojenix said:
Please read the third post.
Also SlimRoms does not support dual sim, and has no intention to any time soon.[/Q]
woah woaaah woaahhh.... its awwwesommmeeee... loved it but sad thing not even single sim working
atleast make single sim to work!!!
anyway awesome work :good::good::good:
Click to expand...
Click to collapse
Slim builds are always awesome.
I use them a lot on my gnexus.
Sent from my XT1022 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok thankyou to all the people who replied regarding dual sim. You truly are the best community I've been in so far.
Once I've got cm11 rolling I'll contact one of you to set up a build.
I know the fact that slim doesn't support dual sim is a disappointment, so here's the deal. If I get hold of a dual sim moto e, I will bring support for dual sim devices to Slim (probably unofficially).
cybojenix said:
Ok thankyou to all the people who replied regarding dual sim. You truly are the best community I've been in so far.
Once I've got cm11 rolling I'll contact one of you to set up a build.
I know the fact that slim doesn't support dual sim is a disappointment, so here's the deal. If I get hold of a dual sim moto e, I will bring support for dual sim devices to Slim (probably unofficially).
Click to expand...
Click to collapse
Exactly, you can do a weekly(or bi-weeklies) unofficial builds and post them in the same thread.
That would be awesome.:good:
Ok before any mods start messaging me/closing thread, I forgot to push the patched kernel source last night. I get on a computer in an hour or so. Sorry for the inconvenience.
Does it support dual Sim variant as no ROM support dual sim variant
Sent from my XT1022 using XDA Free mobile app
gtsfreak said:
Does it support dual Sim variant as no ROM support dual sim variant
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
Please read first page or at least few previous posts always before posting. It should answer your questions.

[ROM] CyanogenMod 13.0 has arrived!

Hi, I'll try to keep it short, between yesterday and today, I have been researching CM13, I thought it was a really hard project, but the results look promising so far, I am not ready to release anything at the moment, but I'll let you see some screenshots. This is just a side project, and I'll keep working on AOSP. I'll update this post whenever I feel like the ROM is kind of finished.
PS: This is Android 6.0.1, EMUI is just on 6.0.0 Isn't that exciting?
http://imgur.com/a/kbybk
See you!
PS2: No PMs about this please, you'll have it as soon as it's finished
CM 13 For HUAWEI P8 Lite?
I solve art/runtime error
wow this is great,i wish you all the best in these projects !
When will be this finished? I can't wait!??❤
Sent from my ALE-L21 using XDA-Developers mobile app
just wondering something, how much space uses system from CM13 and AOSP? for example, on stock Huawei roms almost always they use 2GB+
EDIT: and anyways im asking because, i use Honor 4X/Gplay, and its the same phone that the P8 lite, except internal storage, so that's why im wondering, anyways i think i used your AOSP, that had some bugs like no signal, no wifi, etc (im not sure if you made it), the thing is that rom worked it in my phone too lol
You're just awesome dude! We are all very excited about this project. This is just awesome!
Finally someone who is making ROMs for this phone (and unlike someone doesn't say he'll delete everything "because of noobs")
Sent from my ALE-L21 using XDA-Developers mobile app
Sounds great! If you want someone who can help you testing, i can do that!
Yay, i bought p8lite 2 days ago and i love it!
Great work btw
dude this is awesome !!! so there is no more ril problem this is just great thank you very much !!!!
Hi @XePeleato first of all Good Job and second as i can see into the screenshots the RIL problem is persistent or you didn't insert the SIM . I'm following your work on github if u need someone who test the ROM call me
Spineshankumb said:
Hi @XePeleato first of all Good Job and second as i can see into the screenshots the RIL problem is persistent or you didn't insert the SIM . I'm following your work on github if u need someone who test the ROM call me
Click to expand...
Click to collapse
Hi, The SIM is there, the thing is that I need to patch the framework in order to include the Huawei Java classes that enable the RIL stack. I'll release a testing version soon, since I want to include things to test, it wouldn't make sense to upload a rom with 1 or 2 features working, there would be nothing to test
XePeleato said:
Hi, The SIM is there, the thing is that I need to patch the framework in order to include the Huawei Java classes that enable the RIL stack. I'll release a testing version soon, since I want to include things to test, it wouldn't make sense to upload a rom with 1 or 2 features working, there would be nothing to test
Click to expand...
Click to collapse
Sure! what about the camera? i think is not possible to port the Snap camera feature on HiSi
panchovix said:
just wondering something, how much space uses system from CM13 and AOSP? for example, on stock Huawei roms almost always they use 2GB+
EDIT: and anyways im asking because, i use Honor 4X/Gplay, and its the same phone that the P8 lite, except internal storage, so that's why im wondering, anyways i think i used your AOSP, that had some bugs like no signal, no wifi, etc (im not sure if you made it), the thing is that rom worked it in my phone too lol
Click to expand...
Click to collapse
Wifi worked fine on my 5.1 AOSP version, The system.img weighs roughly 800MB, I don't know exactly how much will it take, since CM13 didn't erase my internal storage.
NeedleGames said:
Finally someone who is making ROMs for this phone (and unlike someone doesn't say he'll delete everything "because of noobs")
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
Well, sokkoban recieved a LOT of input about his roms, there were a lot of questions and stuff, it can get really annoying, these open source projects come "As is, without warranty of any kind" - quoting the GPL so actually, trying to give some decent support on this forums is really kind.
Spineshankumb said:
Sure! what about the camera? i think is not possible to port the Snap camera feature on HiSi
Click to expand...
Click to collapse
The Snap app is included, however since I haven't included the camera HAL yet, I don't know for sure if it will work.
--
I'll be off like a week or so, I have compiled my own kernel, with some CPU governors to try, and I have fixed the screen DPI so far, there's still some serious patching needed.
@XePeleato yeah it worked, but if im not mistaken, with static wifi, but interesting, if the system is 800MB i think i will be fine, thanks for all about this
This is just my mind. But i would be more happier if i got fully working cm13 marshmallow than aosp lollipop. If i was you. I would take cm as a primary mission. But do as you want. Aosp is great news too
Keep it up man!
Vika__ said:
This is just my mind. But i would be more happier if i got fully working cm13 marshmallow than aosp lollipop. If i was you. I would take cm as a primary mission. But do as you want. Aosp is great news too
Keep it up man!
Click to expand...
Click to collapse
Sure, your opinion matters. Luckily, if I apply a patch to CM, it's also valid on AOSP, the same applies for the kernel.
XePeleato said:
Hold on I said nothing about the RIL stack, I don't know if it will work or not, but that's the last thing I am going to try to fix since I don't know if I am going to be able to fix it at all.
Click to expand...
Click to collapse
holly crap I thought this problem is finally solved :/ , okey I hope it can be fixed then , good luck !!!
Great!If I port this for Honor 4C,will it work?Sorry for my bad English.
来自华为荣耀畅玩4C CHM-TL00H -天生急性子 Android 小楼阁

[DISCUSSION] Nougat AOSP for ZE500KL ?

I was thinking: since we have an unlocked bootloader and custom roms, how hard would be to port AOSP Nougat?
There is any tecnical difficulty, like kernel version, that can block us?
Not much, I would imagine.
As far as I can tell, it'd just take a dev that's interested in putting in the effort.
Yes, this counts as my "yes, please" vote for Z00T.
I am votting with yes
I was thinking about do a try and compile it straight away, but i fear i'm not experienced enough to make something bootable
I don't think that the kernel or other thing will block it, but we got a custom ROM so late and I don't think we'll have a CM14 very soon
Cm14 should be prettt easy since we have cm 13, the point is that right now is not worth it because it's still in early stage, so a fully fledged cm13 would be more usefull.
AOSP is another talk because it's so barebone
Jhyrachy said:
Cm14 should be prettt easy since we have cm 13, the point is that right now is not worth it because it's still in early stage, so a fully fledged cm13 would be more usefull.
AOSP is another talk because it's so barebone
Click to expand...
Click to collapse
Umm, thanks for your thoughts about trying to bring N, it seem you got the answer yourself
from what i look at Z00L/T source, other than some fix and caf one, they could bring N to L/T with some borrowed libs. And looking from our source, I still found some line with L/T on it, so, yes, dev may bring N to this device, just hope that libs going to work with this devices.
But as you said, a fully fledged cm13 would be useful, using RR build for 3 days, and got the problem as they says. Plus, for me, front camera isn't working (called arclib or something, front camera effect when using asus camera, it's working fine with other camera because they didn't load that lib). Constant lag when using GPS other than "gps only" (might RR only problem). etc..
Either way, I hope that you could join the team (or, is he a one man army?) maintaining this device, fixing things come first, upgrade when everything is fine. At least "ok".
I don't know about AOSP, but many say choose CM because of CM broad compatibility layer. If that's true, then AOSP might slightly harder...
or... not really.
Sent from my ASUS_Z00RD using XDA Labs
Interesting, I'm not developer but I think this is possibke, Android 7.0 supports S410, maybe CM14 will better than AOSP.
yeah i still waiting ??
Sent from my ASUS_Z00ED using Tapatalk
Who wants to test BeanStalk 6.25 for Z00RD/Z00E?
imjohncarlo9 said:
Who wants to test BeanStalk 6.25 for Z00RD/Z00E?
Click to expand...
Click to collapse
I, but it will be possible tonight because now i working , phone at home
imjohncarlo9 said:
Who wants to test BeanStalk 6.25 for Z00RD/Z00E?
Click to expand...
Click to collapse
i will try tomorrow ...good for this ??
Sent from my ASUS_Z00ED using Tapatalk
Some news?
waiting :victory:
Waiting for some USEFUL news.
Today I try to compile it, but do not know if I aim, because I'm not a developer and I have no experience, but I try the same, stay connected, sorry for my bad english
I can't download the sources because it me give an errore i can't compile a ROM,sorry
Still waiting for news.
I tried to compile it myself, I downloaded all the sources, but since the Z00ED / RD is not officially supported by CyanogenMod, and then the repository and everything else must be manually added, I tried but I get error during compilation. Now we must wait for some developer is able to have time to complete it, because basically if you have created for the Z00L / Z00T do not see why you can not fill because they have the same processor. Sorry for my bad English
kurnalcool said:
I tried to compile it myself, I downloaded all the sources, but since the Z00ED / RD is not officially supported by CyanogenMod, and then the repository and everything else must be manually added, I tried but I get error during compilation. Now we must wait for some developer is able to have time to complete it, because basically if you have created for the Z00L / Z00T do not see why you can not fill because they have the same processor. Sorry for my bad English
Click to expand...
Click to collapse
Hi! Could this help you in some way? I don't know how, but I hope there is something usefull. This is a link to a russian forum where CM13 for ZE500KL was first posted by his original creator. Is in russian but I think you can use google translate to read the forum http://4pda.ru/forum/index.php?showtopic=766921

Any way of getting Qualcomm DIAG drivers on my custom rom ?

Greets,
I have a custom rom installed on my phone and majisk rooted. I want to install this app snoopsnitch (Android app that collects and analyzes mobile radio data to make you aware of your mobile network security and to warn you about threats like fake base stations (IMSI catchers), user tracking and over-the-air updates.)
However the app gives an error :
Your device is not compatible
REASON: Could not initialize DIAG interface
Visit the project website for details (https://opensource.srlabs.de/projects/snoopsnitch)
Click to expand...
Click to collapse
On the website itself it sais amongsts others :
Unsupported. Devices with custom ROM such as CyanogenMod which lacks the Qualcomm DIAG kernel driver (DIAG_CHAR)
Click to expand...
Click to collapse
My phone is Lenovo ZUK Z2 pro with latest AOSP Extended.
Is this given only to manufacturers or is there a chance i can get this compiled for my phone as well ?
Probably not. It would be nice though.
Probably not going to see it in a custom kernel or probably not going to find it as in source code ?
any clues as to where i could get more info on this issue ?
hash02 said:
Probably not going to see it in a custom kernel or probably not going to find it as in source code ?
any clues as to where i could get more info on this issue ?
Click to expand...
Click to collapse
I probably know less about this than you. But I doubt you can import it into a custom ROM.

Categories

Resources