I flashed a boot animation zip got from xda using cwm recovary, now when switching on the phone nothing showing on display and it vibrating in some intervals, i tried entering fastboot by pressing keys it succeed after several try, and entered recovary but i cant even clear cash because recovary closing and phone restarting immediately after i select any operation. after sometime i found a solution; entering fastboot and selecting factory is leading to bootup and there boot animation is showing and after it showing optimising apps and all my apps are done and phone is booted but next time when i restarting my phone the old thing is happening. how can i solve this, please help
Related
So I flashed a recovery from terminal emulator, pressed reboot to recovery, the phone showed blank black screen, shut down and it kept on doing this for a loooong time.
After that I tried download mode, but it's stuck at setup connection. Any things I can still try before JIG/JTAG?
EDIT: The panic was bigger than the problem. Pulled out SIM, SD card, tried to boot it, it displayed a logo showing that there is a problem with the connection to the PC, then I booted to download mode and flashed a 4 package ROM, as it can override the boot thingy. So it's all good now.
My out of the box Nexus 6 is now stuck looping on and off at the Google boot screen after it tried to install the system update.
I've used the toolkit 1.9.8 to go back to stock. It goes thru the steps appearing to show OKAY and finished at each step. It never reboots the phone at the end. I try to force reboot after waiting for several minutes and it still boot loops. I try again the process again and sometimes it loops and a few times it actually starts up to the welcome screen. However, if I try to root or update recovery (using the toolkit), I get the boot looping again.
Did google bork my phone during a failed update? Is there anything else I can do to completely restore the phone? I've also downloaded the images on google and flashed---same boot loop.
Ultimately, my phone is now booting up to the welcome screen as expected and shows LRX21O. BUT, if I try to do anything (root or recovery), boot loop results again.
(I was able to unlock the phone and know about the usb debug and OEM unlock settings in dev menu, fyi).
Just got my XT1095 last week and unlocked the bootloader and rooted the phone (still on 4.4.4). Was playing around with the boot animations last night and all of a sudden my phone froze at one frame of the animation. The weird thing is my phone still works, I can feel the haptic feedback when I press buttons and Moto Voice works too, but I just can't see anything on the screen except the frozen boot animation. After restarting the phone several times, the same thing happens.
Tried to push some stuff to phone and realized i might not have re enabled usb debug after unlocking bootloader..
Friend suggested updating to 5.0 and see if that resets boot, but I can't even fully load Moto Device Manager it says "Update is Already in Progress" and closes.
Any ideas how to reset everything or restore stock boot animation?
Hey guys,
I was using my phone today and decided to turn it off. I am currently on 5.1 and I am rooted on stock. When I turned it back on, I was kind of stuck on a boot loop but I can usually bypass this by holding down the power button until I feel a quick vibrate and then my phone starts doing the "Optimizing Apps...". However, it didn't do that this time so I decided to reboot my phone into recovery, wipe the cache and dalvik and restart. Again, stuck on the boot animation screen. So I just let it run its course and then all of a sudden I see my phone go to the home screen but my launcher is reset and I am running out of cache space. I decide to connect my phone to my computer and backup some files. As I backup the last of my DCIM folder, my phone reboots and all of a sudden I have the new Motorola boot animation with the stitching I guess. But then I'm stuck at the bootloop again.
Anyone else experience this or know how I can fix this? I reaaallly don't want to factory reset.
I recently did a reset via settings on a gen 1. No change in boot animation. I then did a reset via stock recovery and got the new animation. I then did another reset via settings and during the first boot it had the old animation but subsequent boots have the new animation.
Here's the deal, I have a sprout8 device (the Indonesian Nexian Journey One) running stock 6.0 with some xposed mods installed on it. Suddenly the device shuts down and when I try to boot it up it only goes halfway through the bootanimation when it shuts down again. I wasn't too worried as I thought it was just a conflicting system issue and I also thought it was time to re-flash fresh stock 6.0 to freshen up my phone anyway. So I went ahead and did it.
Here's where the problems start to show up, I had a hard time booting to recovery through the power + volume up combination. The phone suddenly shuts down on its own as it boots up. I tried it a few times and finally got to recovery. After that, as I flashed stock 6.0 the phone shut down again. I thought it was an issue with my recovery so I tried wiping everything through fastboot and re-flashed recovery through fastboot aswell. From there I tried again to flash stock 6.0 through recovery and again, the phone shut down. I tried a different ROM thinking it was a ROM issue but still got the same results.
After hours of trying to flash a ROM through recovery (retrying over and over as it suddenly shut down while flashing), I finally got a ROM installed. Then I rebooted my phone, but again it freezes halfway through the bootanimation (literally freezing the bootanimation) and refused to do anything. I took off the battery and booted up the phone countless tries trying to get it to boot up. When it finally booted up, I filled in all the Google startup credentials and finally got started on a fresh stock 6.0. However, I tried to restore my previous application data through Android's application recovery on startup but everytime the device installs a new application it would freeze up and shut down. This happened countless times. Then the phone, once again, shut down and could not start the ROM. It would freeze up on the bootanimation.
Then things started to get weird, when the phone turns on it should show the "Nexian" logo in all its glory before going to bootanimation. But here the screen gets all distorted and shows these weird horizontal (and sometimes vertical) lines. Nothing's wrong with my phone screen so I assume it is a system error. From here on, the phone refused to boot. It just shows the Nexian logo and restarts over and over. The same thing happens even after I re-flashed both my recovery and ROM. I even tried using SP Flash Tool to re-flash stock but still the same results.
Now, the device wouldn't even turn on. But when I connect it using USB to a Windows computer, it still gets detected through device manager as an ordinary MediaTek device.
I'm assuming now that it may be a problem with the /system parition where we install our ROMs in. The partition may be (partially) corrupt. Seeing as the device could still boot the ROM a few hours ago but freezing upon updates to the stated partition.
If you guys have any other ideas/solutions I'm all ears.