Database Develop

I think I bricked my Tab?

It is showing a small round mobile phone, 2 dots, a ! inside an orange triangle, 2 more dots, and a computer.
This is the first time I'm seeing this screen.
Edit: Just to give some insight as to what I was doing...
I was using a SGT7 build of CM9, and I noticed USB Tethering wasn't working (native nor Wired Tether 1.4 worked). I had to run to a friends house for the night real fast, so I figured I'd just go back to Stock firmware and use that for a few hours just so my desktop could get Internet.
I am also using Windows 8 Release Preview. Odin could see my device fine, but upon pressing Start to start the flashing process, it did nothing (I'm guessing Odin or Samsung's drivers don't work well on W8RP). No progress was made on either Odin or my tab for about 5 minutes. Since nothing was done, I figured I could close Odin, and restart my Tab. Now I only get this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I immediately went to the "How To Unbrick Your Galaxy Tab!" thread, but didn't find mention of the screen I described in this post, and then I made this post in panic.
When I went back to Windows 7, Odin was able to reflash my tab successfully, and USB Tethering was working fine. So perhaps Windows 8 has some weird incompatibility with Samsung Drivers? In any case, this might serve as a warning to anyone trying to use Odin in Windows 8.

I think it was mentioned in a few threads.
Many confirmed that it is another download mode.
You just have to make sure it is fully charged, and keep trying Odin restocking. It will go through.
(I never experienced it myself)
Edit: many reference, just search in here fore "phone exclamation pc"

Yea it would seem it's another download mode. I was able to flash with Odin just fine in Windows 7, so all is well again

i have said this in many threads. this is the result of faulty flashing. just use the latest version of odin
please thank me if you found this helpful

[SOLVED] PROBLEM - Tampered - Relocked - S-On

Hello ,
I hope this is the right place to open this thread.
Well I'll cut it short,
I had a touch screen problem with my HTC One M7 , and after a lot of research I decided to give it a shot and install a different ROM. Which I did so. But the problem continued.
I installed a different ROM but this time the SIM was locked and I had no status bar and got the - Unfortunately, System UI has stopped error.
So I decided to flash all back. But....
I don't know how I got this far, but this is the last situation and 2 days already I can not fix it.
I have no ROM installed, no back-ups at all...
Print screens will tell more than words I think :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
since I have no ROM or USB Debugging is not enabled , ADB does not see device but fastboot does.
Please help !!!!
Thanks in advance

strangedenial said:
since I have no ROM or USB Debugging is not enabled , ADB does not see device but fastboot does.
Click to expand...
Click to collapse
USB debuggin is only needed to use ADB commands when the phone is booted to the OS. Only fastboot will work when in bootloader mode and this is normal.
You can restore your phone using the 7.19.401.102 ruu.zip posted here: http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
*5th file from the bottom
instruction how to flash in the same thread.

alray said:
USB debuggin is only needed to use ADB commands when the phone is booted to the OS. Only fastboot will work when in bootloader mode and this is normal.
You can restore your phone using the 7.19.401.102 ruu.zip posted here: http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
*5th file from the bottom
instruction how to flash in the same thread.
Click to expand...
Click to collapse
Works perfect!
Thank you a lot !

14 days for an unlock code?

trying to get an unlock bootloader code for my mate S .... keep gettiing "The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days."
do i really have to wait 2 weeks before i can root my phone?

hey,
i did not have to wait at all.
i followed a guide posted in a german forum where they point out going here first:
http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=list
on the top right you can see "download", click that.
you should see an "unlock bootloader" link. check the pic below to see what i mean:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
on the following page check the "remember ID" box and click the facebook button leaving everything else empty (you need a facebook account to log on at the following site of course). see the pic!
you should then see an "unlocking agreement". accept it and then enter the data as required in this pic.
upon entering my data there i instantly had the bootloader unlock code on my screen.
try it out, hope it works for you!
greetz,
vercetti.

thanks for the reply, but i still get the same message....."The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days.".....guess ill have to wait a couple of weeks....

unlocking bootloader
I am as well unable to get the unlocked code, kept saying the same message. Do you really have to wait 14 days? Did you get any luck, I see the other post about DC-Unlocker, don't know how to go about it. I had my phone for quite awhile just haven't happen to unlock it yet, however it is already SIM unlocked, just not the bootloader.
***update
So i went ahead and used DC-unlocker; paid the $4.59 for it and was able to get the code and unlocked the bootloader and was able to install a custom recovery, I couldn't wait/stand for Huawei website, it was frustrating me, so buggy and unresponsive.
After all that just search google, "root mate s TWRP recovery", a lot of helpful content out there, that'll explain how.
By the way, I have the model CRR-L00, it was already network unlocked when i bought it and came with google play already installed.
TWRP recovery i used - twrp-2.8.7.0-carrera.img (searched it on google)
root i used- BETA-SuperSU-v2.68-20160228150503
A complete guide would be here, very straightforward: http://www.android.gs/root-install-twrp-recovery-huawei-mate-s/ It states that it was done on a crr-l09, I've tested on mines it works as well.

Little brother messed up his phone... and I'm too dumb to fix.

Hello new friends.
My little brother and his inventive mind were messing around with his phone and this started to show up:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(btw, I tried what it says on the screen.. did nothing.. also trying to flash a new rom did nothing)
I know little about Motorola phones and rooting in general... all i can do is "root" samsung with silly Odin software (easymode right?)
I gave the phone to a friend and after some examination he said that somehow my little brother managed to "delete and/or corrupt" the phones main partition. whatever that means... He was unable to do a hard reset because at some point the phone said there was a problem with one of the partitions.
Now.. while I dont know much about android and motorola, im great following directions.
is there a humanly possible way to fix this?
I can get to this menu below, but everything I touch goes back to bootloader message:
Additional info with numbers mumblejumble:
Thanks in advance,
Dan.

Try this: forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657

dangadelha said:
Hello new friends.
My little brother and his inventive mind were messing around with his phone and this started to show up:
(btw, I tried what it says on the screen.. did nothing.. also trying to flash a new rom did nothing)
I know little about Motorola phones and rooting in general... all i can do is "root" samsung with silly Odin software (easymode right?)
I gave the phone to a friend and after some examination he said that somehow my little brother managed to "delete and/or corrupt" the phones main partition. whatever that means... He was unable to do a hard reset because at some point the phone said there was a problem with one of the partitions.
Now.. while I dont know much about android and motorola, im great following directions.
is there a humanly possible way to fix this?
I can get to this menu below, but everything I touch goes back to bootloader message:
Additional info with numbers mumblejumble:
Thanks in advance,
Dan.
Click to expand...
Click to collapse
as I understand it this is only the bootloader unlocked, the phone works regularly only that at the time the alert you. There are two ways to avoid this annoying message:
1 relock the bootloader
2 use an alternative screen that hides the annoying warning.
before re-locking take a deep DELETE and uses a script to reload a ROM from scratch
Find it all on xda !!!! look!

[RESOLVED] Redmi Note 9 Hard Hard Hard Bricked Help?

Okkaayy guys, so, i'll take you to the end of the whole thing which is, I installed and downgraded 2 versions in stock rom, which was V12.5.1.0 worked like a charm, then I updated the version with Xiaomi's original it's own system updater to newer version and it was still fine then I updated it to Android 12, MIUI 13 and it bootlooped.
So, I wasn't able to get into recovery, trieedd soo many times and neither I was able to get in to fastboot mode. What did I do? Flashed it again with Format All + Download option. I got the bar and everything but I waited a bit and nothing happened. I'm like, is this working? And I did the mistake. I pulled the plug. And here I am. Surely I've 60+ battery. Besides that I charged it for more than 15 minutes. No power button works, no fastboot, no recovery. Nothing "HAPPENS". Literally. No matter what I do, how long I press to any button, device won't turn on in any sort of way. Libusb still detects it as Mediatek driver but I can't use SP Flash Tool because simply device won't turn on. Bypass utility stays like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Held power button for 5 min (literally I did) nothing happened
No fastboot or recovery
SP Flash Tool simply can't do the trick because device doesn't turn on
I have 60+ battery %100 surely.
USBLIB still able to detect the port.
What do? Is it even possible to rescue this poor guy? It was my main phone btw...
EDIT - UPDATE: I have no idea how but I was playing around with SP Flash Tool, trying to do some things, nothing was actually happening but like after few minutes phone just gone back into bootloop, It turned on, I genuinely don't know how and just for confirmation, after I installed stock rom back my charge is %73 so surely it wasn't related to my battery. IDK this devices are weird. Sorry for the topic mods..