Hi everyone , I have a Behavior my phone ( a motorola milestone ) is blocked in bootloader mode. but it does has not worked , I tried with the Motorola software update but it does not detect my phone , it displays : IMEI serial Number: N / A model Number: N / a, Operator: N / A . So I would need help to try to re- work my phone.
Here is displayed by my phone
bootloader
90.78
Battery OK
OK to Program
Transfer Mode :
USB
I've never believed a phone can be irreparably bricked but with this P10, I'm beginning to wonder...
My P10 can now only connect via Fastboot (reading "PHONE Locked"). Normal boot just lasts around 10 seconds before it reboots - and just a black screen, not even the Huawei logo. I can boot into the EMUI recovery screen but that's a fat lot of good...!
I can't get the unlock code from Huawei as you need the ID that's only available via Android, which I can boot into...
Any thoughts on what I can do next? I've even got to the point where I might even go down the Funky Huawei route! Here are some of the Fastboot details if it helps anyone with ideas:-
fastboot oem get-product-model:
(bootloader) VKY-LO9
fastboot oem get-build-number:
(bootloader): NRD90M test-keys
fastboot oem get-psid:
(bootloader) SN:6PQ0217313002222
(bootloader) IMEI:861956xxxxxxxxx
(bootloader) IMEI1:861956xxxxxxxxx
Thanks,
I would recommend Funky Huawei Club, saved my phone and gives you enough credits to rebrand to a model that gets more updates.
Just out of curiosity, how did you brick it?
You haven't unlocked BL or flashed a custom ROM yet, what happened?
You can rebrand it for free without Funky, I posted about my P10 (L29) and how I fixed it, look for my post.
VKY-LO9 is huawei p10 plus. this thread is about huawei p10. But anyway. we need to know who it happened and what you did that you ended with a bricked device. My experiences are, that 80% of bricks can be fixed.
I am from Canada and here there is a carrier Called Rogers and they also own a company called Fido. I bought the phone from Fido and because they are owned by Rogers I thought it would be safe to use Rogers firmware as it was getting more updates and I used the https://forum.xda-developers.com/ge...n-firmware-t3506404/post73255938#post73255938 method to flash any variant and then got stuck on a boot loop to erecovery, this happened on my p10lite as well.
JeremyHTCA9 said:
I am from Canada and here there is a carrier Called Rogers and they also own a company called Fido. I bought the phone from Fido and because they are owned by Rogers I thought it would be safe to use Rogers firmware as it was getting more updates and I used the https://forum.xda-developers.com/ge...n-firmware-t3506404/post73255938#post73255938 method to flash any variant and then got stuck on a boot loop to erecovery, this happened on my p10lite as well.
Click to expand...
Click to collapse
just go t ofastboot mode, reflash your rogers firmware and reboot.
I dont know the exact names of your original firmware and the one you flashed, so i cannot help. 90% it is your fault by messing with wrong firmware.
to the thread ybout the flashing any variant.....it is quite new and still no post about sucessfull flash. so if you ar enot experienced user, don´t try it
After some digging around, I can confirm the phone is a P10 - it's just that someone flashed P10 plus firmware on it!
I now have the bootloader unlock code and have unlocked it. However, the following fastboot results aren't promising:-
fastboot oem get-psid: FAILED (remote: Read IMEI failure)
fastboot devices: 0123456789ABCDEF
fastboot oem get-build-number: NRD90M test-keys
fastboot oem get-product-model: VKY
I'm convinced, however, the model is really a VTR-L09. I have access to DC-Phoenix but there isn't a VTR-L09 firmware (I've just posted a request for one, however). Any other ideas on what to try? HCU Util seems out as you need to boot into Android first to set it to Manufacturer's Mode.
Ah - some progress. I managed to flash a Canadian Rom via DC Phoenix and can boot into a basic Android. Here are some details:-
Device Name: ONYX D189
Build Number: NRD90M test-keys
EMUI Version: 3.1
Android Version: 5.1
IMEI: 00000000000000000
I tried to force and update with (unzipped) file "update_full_VTR-L09_hw_eu.zip" but the update failed at 5%
petepeters said:
Ah - some progress. I managed to flash a Canadian Rom via DC Phoenix and can boot into a basic Android. Here are some details:-
Device Name: ONYX D189
Build Number: NRD90M test-keys
EMUI Version: 3.1
Android Version: 5.1
IMEI: 00000000000000000
I tried to force and update with (unzipped) file "update_full_VTR-L09_hw_eu.zip" but the update failed at 5%
Click to expand...
Click to collapse
you need to disconnect the USB while trying to update, from my experience, it won't work anyway. Try using Team MT tools.
ok so you are 100% sure you have Huawei P10 and still you flash huawei P10 plus (onyx D189) firmware on it?
You probably deserve that your device is bricked and now even without IMEI
Here you can download some firmware.
huafan.cz
Pro-teammt.ru
I assume you have to flash the original firmware for your device (Huawei P10 vith cust that match your phone VTR-L?9C???B???)
Hurrah, it's fixed. All thanks to Mutahhar who supplies a service via this site:-
http://ministryofsolutions.com/2017/09/huawei-phones-unbrick-service-soft-bricked.html
It took a while and mainly involved DC Phoenix & HCU client but we got there in the end - and 'upgraded' it to the Dual-SIM L29 in the process! Highly recommended after many fruitless hours trying to fix this myself.
petepeters said:
After some digging around, I can confirm the phone is a P10 - it's just that someone flashed P10 plus firmware on it!
I now have the bootloader unlock code and have unlocked it. However, the following fastboot results aren't promising:-
fastboot oem get-psid: FAILED (remote: Read IMEI failure)
fastboot devices: 0123456789ABCDEF
fastboot oem get-build-number: NRD90M test-keys
fastboot oem get-product-model: VKY
I'm convinced, however, the model is really a VTR-L09. I have access to DC-Phoenix but there isn't a VTR-L09 firmware (I've just posted a request for one, however). Any other ideas on what to try? HCU Util seems out as you need to boot into Android first to set it to Manufacturer's Mode.
Click to expand...
Click to collapse
Mind telling me how you unlocked the bootloader without access to android? I have the exact same problem. If I got the blcode I can restore it with no problems whatsoever.
porkslapchop90 said:
Mind telling me how you unlocked the bootloader without access to android? I have the exact same problem. If I got the blcode I can restore it with no problems whatsoever.
Click to expand...
Click to collapse
I honestly don't remember now. I know it was by using DC Phoenix or HCU Util. Get in touch Mutahhar - for just the bootlock code I think the cost was $10, something like that.
Hello, My Huawei GR3 2017 (PRA-LX2) full brick with FRP and Bootloader lock condition for that I have purchased DC-Phoenix + HCU 3 Days license. I have successfully write phone firmware by DC-Phoenix, but after that flashing in upgrade mode, I get VERLIST partition for that I have to repair Huawei phone country & vendor with HCU but HCU not detecting my phone.
Please help me how I can unbrick it?
Hello.
Help me get the code to unlock the bootloader on the Honor 4C device.
Serial Number: A8K4C15724008701
IMEI: 866778029027251
Product ID: 50763430
Model: HUAWEI Honor 4C (CHM-U01)
Thankful
Hey, check this thread, you can unlock your bootloader using this method. Root access is needed. No internet connection required, easy peasy!
Need help on how to unlock bootloader
hello everyone pls i need a firmware i cant find it i try many other firms but the problem still the same
Checking fastboot device.....OK
Reading info.....OK
Device Model: VOG-L29
Device Firmware: :VOG-L29 12.0.0.139(C431E3R2P2)
Base Firmware: :VOG-LGRP2-OVS 102.0.0.139
Custom Firmware: :VOG-L29-CUST 102.0.0.3(C431)
Preload Firmware: :VOG-L29-PRELOAD 102.0.0.2(C431R2)
Device FB Lock: LOCKED
Device USER Lock: LOCKED
Device Lock: locked
note /
i have eft pro account
unlock tool
thank you
Hi,try to explain your problem with more details