Related
does anyone know what i need to type in recovery console so i can mount my g1 to the computer
nevermind i figured it out..
ThaBoyC said:
does anyone know what i need to type in recovery console so i can mount my g1 to the computer
nevermind i figured it out..
Click to expand...
Click to collapse
Please remember to edit the title of your post with [SOLVED] so that it can be closed and locked. Thank you.
Please could someone help me i did the erase all on fastboot and now my imei number is 0
So could someone send me a backup of there hub dhub
open cmd and type these
su
cat dev/block/mmcblk0p19 >/sdcard/hub.img
cat dev/block/mmcblk0p20 >/sdcard/dhub.img
then go to sdcard and zip the 2 files and send them over by pm
Please it would mean alot to me
Please someone help me!
here you go
KennyWuLee said:
here you go
Click to expand...
Click to collapse
thanks could you do this and upload to
su
cat dev/block/mmcblk0p22 >/sdcard/fsc.img and upload to
rickwyatt said:
thanks could you do this and upload to
su
cat dev/block/mmcblk0p22 >/sdcard/fsc.img and upload to
Click to expand...
Click to collapse
done
Could i ask witch moto 2014 you got as mine is dual sim
rickwyatt said:
Could i ask witch moto 2014 you got as mine is dual sim
Click to expand...
Click to collapse
I have the xt1063
i think need a xt1086 hub dhub anyone
XT1068 dual INDIAN
You recovered succedfully your IMEI? If you did can you please make a little tutorial how you managed that? Just in case it would be helpfull to other people.
Did not work imei still 0 I think it has something to fsc as the image is blank
I think imei doesnt stored into these hub dhub or fsc partitions..,
Imei and other private informations are stored in pds partitions and every device has its own pds partition.
rickwyatt said:
Please could someone help me i did the erase all on fastboot and now my imei number is 0
Click to expand...
Click to collapse
That's bad. If the moto g 1st gen threads are an indicator, then you are screwed.
There's still no way of recovering a lost imei if "fastboot erase all" was executed. (Who in the world told you to do that? It is well known that this command will permanently brick moto g). And even if you could somehow get an imei through flashing someone's backups, your provider would kick you out of the network because of an falsified imei (it's a unique number, assigned to the phone).
cyb3rillusion said:
Imei and other private informations are stored in pds partitions
Click to expand...
Click to collapse
Yes. The system will report imei=unknown if pds is corrupt, read-only or in any way not accessible to the system. Then there it's a good chance of restoring the imei. But after "fastboot erase all" the system will report imei=0 and that is the end of the story. Motorola doesn't give any tools or information on how to manipulate imei.
Visit service center if imei loss
K1Ng0r.fTw~ said:
Visit service center if imei loss
Click to expand...
Click to collapse
That's probably the only solution. They will most certainly put a new board into the device. Won't be cheap.
You don't have pds partition backup?
Yes I do PDS is perfect
vikasb32 said:
You don't have pds partition backup?
Click to expand...
Click to collapse
Doesn't help with "fastboot erase all"
i think
it isnt
cat dev/block/mmcblk0p22 >/sdcard/fsc.img
it should be
dd if=/dev/block/mmcblk0p22 of=/sdcard/fsc.img
Dont know how
but my imei is still 0 but my signal returned and all is working again i reflashed partition hub before it has worked again i used the one provided here my g is healed <3
I have the factory restore utility available for the 3T but not sure how to upload it or link to it since it exceeds the allowable upload size limit. It's a 1.2GB 7z file.
Split it up with WinRAR and then upload it to gdrive, Mega, mediafire... The server is up to you!
guisantes said:
I have the factory restore utility available for the 3T but not sure how to upload it or link to it since it exceeds the allowable upload size limit. It's a 1.2GB 7z file.
Click to expand...
Click to collapse
Please try the attached torrent file.
guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
I'm trying it. It's just a matter of time before I need something like this ;
I'm ~30% done so should be downloaded for me in ~60-80 minutes+.
Thanks.
---------- Post added at 04:51 PM ---------- Previous post was at 04:09 PM ----------
hachamacha said:
I'm trying it. It's just a matter of time before I need something like this ;
I'm ~30% done so should be downloaded for me in ~60-80 minutes+.
Thanks.
Click to expand...
Click to collapse
I've got the file downloaded, unpacked, and am wondering if there's a README that came with it? I can see a lot of the usual ways to use the components via fastboot, etc, but thought this was meant to be a .. "utter disaster recovery tool" ;. Or am I missing something?
Yes, it is and utter disaster recovery tool.
You may need the qualcomm drivers - 64 bit windows driver is attached. I believe mine autoinstalled without needing the files
**** NOTE: This procedure will completely wipe your entire device ****
To use the recovery tool.
1. With the phone turned off, press and hold the volume up button while inserting the USB cable attached to your PC.
2. Windows will recognize the Qualcomm driver and if you're lucky will auto install the driver.
3. Run the MsmDownloadTool V3.0.exe file with administrator privileges (right click and run as administrator)
4. One of the lines in the window should show COMM or something that is not "No Device" when your phone is attached and recognized as the Qualcomm loader
5. Click on that line item, then select Start
6. The whole procedure should take about 5 minutes and the line item will turn green when completed.
guisantes said:
Yes, it is and utter disaster recovery tool.
You may need the qualcomm drivers. I believe these can be easily found but if not, then I can upload them as well.
**** NOTE: This procedure will completely wipe your entire device ****
To use the recovery tool.
1. With the phone turned off, press and hold the volume up button while inserting the USB cable attached to your PC.
2. Windows will recognize the Qualcomm driver and if you're lucky will auto install the driver.
3. Run the MsmDownloadTool V3.0.exe file with administrator privileges (right click and run as administrator)
4. One of the lines in the window should show COMM or something that is not "No Device" when your phone is attached and recognized as the Qualcomm loader
5. Click on that line item, then select Start
6. The whole procedure should take about 5 minutes and the line item will turn green when completed.
Click to expand...
Click to collapse
Thanks, that seems very useful. Thanks for making it available here.
hachamacha said:
Thanks, that seems very useful. Thanks for making it available here.
Click to expand...
Click to collapse
No problem.
I've used a very similar tool previously for my oneplus one which would not power up Hopefully I won't need it for my 3T !
Here are the missing Qualcomm 64 bit drivers.
Can we make this a sticky or mention in the OP the recovery procedure from post #5? I know this will become invaluable later on as the few devs that bought this phone start fully getting into test mode.
Delete fixed. Never mind.
You should place this in general with the guides in the op with some pictures , I think many will benefit rather than diving through the QnA section for it
if i restore factory mode.what's the next?
---------- Post added at 07:35 PM ---------- Previous post was at 07:29 PM ----------
guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
when i restore, after reboot, have some error, it says: md5 checksum failed!
help me!
mgbotoe said:
You should place this in general with the guides in the op with some pictures , I think many will benefit rather than diving through the QnA section for it
Click to expand...
Click to collapse
I agree: Over on OP and here, I find myself recommending this guide and software nearly each day to someone that just "bricked" their phone. It's really good. As was just said, sticky it in "Guides" area. Thanks.
guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
Do you have the password from the OnePlus support?
FYI.. OP3T finally has an official section on the OP downloads page
http://downloads.oneplus.net/
martinklaus said:
Do you have the password from the OnePlus support?
Click to expand...
Click to collapse
There is no password on this archive.
mahonlee said:
if i restore factory mode.what's the next?
---------- Post added at 07:35 PM ---------- Previous post was at 07:29 PM ----------
when i restore, after reboot, have some error, it says: md5 checksum failed!
help me!
Click to expand...
Click to collapse
I used it without issue on my 3T. Are you still seeing the problem?
I uploaded it on megaNZ but I can't send links in here, so if you want it, send me a message. Btw: Thanks for the torrent, works perfectly!
guisantes said:
There is no password on this archive.
Click to expand...
Click to collapse
Yes, but on the original file from the support.
That's correct. I repackaged the files without a password after tech support extracted them via a remote session on my PC. Their archive password was very long with lots of non alpha-numeric characters.
Hello, anyone have a working mehtod to enable diag port on this device?
I have tried many code, script and standard method (adb shell and setpro), but all of this failed.
I think that kernel does not support diag mode, because in init.asus.usb.rc i have not found diag,adb option.
There is a way to put this option in file init? Or there is another way to enable diag port?
This phone have imei 0 and i want to restore it
Thanks in advance
I need too
me too please someone share wit' us..
only hardware method found by me
I have unlocked the bootloader but when I boot into Twrp recovery and Format the Data then I am unable to Enable the USB in the Enable MTP section . So, because of this I am unable to transfer any files and I am unable to root my phone . Please help me . Thank you .
I have the same issue. Even if I disable and then again enable mtp, the internal storage isn't displayed on my computer. I had formatted data. Because of this I cannot even load any OS zip and my phone is just with no OS. It's not working on any version of twrp posted in the official twrp page for the x526. Can anyone help? It's urgent.
How can I transfer files from my PC to x526 when it's in TWRP? Reinstalling Twrp or Full device wipe didn't help either.
Disabling/Enabling MTP makes the disconnection/connection sound on my PC ,but No x526 data disk is displayed.
Can anyone please reply? Is MTP transfer working fine for everyone else?
RandomDelta said:
Can anyone please reply? Is MTP transfer working fine for everyone else?
Click to expand...
Click to collapse
Why mtp when you can do with otg
Prince4le said:
Why mtp when you can do with otg
Click to expand...
Click to collapse
1. Usb type C otg cables are costly
2. I'm not looking forward to an added hassle of moving files into a flash drive when there is an option to directly put files in root memory.
Here is the solution :-
1 open twrp recovery in your phone
2 connect the data cable to your phone and your computer
3 in the recovery click on ENABLE MTP option
4 after that download MINIMAL ADB AND FASTBOOT SOFTWARE IN YOUR COMPUTER i will post the link
5 install it on your pc and copy any file you wanna past and past it in the c drive programme files x86 minimal adb folder
6 than open the cmd by shift and right click open cmd here
7 in cmd type 1st command - adb devices hit enter
2nd. adb push (file name) without breakets /sdcard/.
Done your file will be copied to twrp and now you can easily flash a rom , file etc.
---------- Post added at 05:53 PM ---------- Previous post was at 05:52 PM ----------
shaikiffu said:
I have unlocked the bootloader but when I boot into Twrp recovery and Format the Data then I am unable to Enable the USB in the Enable MTP section . So, because of this I am unable to transfer any files and I am unable to root my phone . Please help me . Thank you .
Click to expand...
Click to collapse
Solution posted
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
Minimal adb and fastboot link
https://forum.xda-developers.com/showthread.php?t=2317790
Prince4le said:
Here is the solution :-
1 open twrp recovery in your phone
2 connect the data cable to your phone and your computer
3 in the recovery click on ENABLE MTP option
4 after that download MINIMAL ADB AND FASTBOOT SOFTWARE IN YOUR COMPUTER i will post the link
5 install it on your pc and copy any file you wanna past and past it in the c drive programme files x86 minimal adb folder
6 than open the cmd by shift and right click open cmd here
7 in cmd type 1st command - adb devices hit enter
2nd. adb push (file name) without breakets /sdcard/.
Done your file will be copied to twrp and now you can easily flash a rom , file etc.
---------- Post added at 05:53 PM ---------- Previous post was at 05:52 PM ----------
Solution posted
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
Minimal adb and fastboot link
https://forum.xda-developers.com/showthread.php?t=2317790
Click to expand...
Click to collapse
It's a very roundabout way of doing a simple thing.
Does mtp work for you on your x526?
If yes which version /variant of twrp are you on?
RandomDelta said:
It's a very roundabout way of doing a simple thing.
Does mtp work for you on your x526?
If yes which version /variant of twrp are you on?
Click to expand...
Click to collapse
I had a Chinese recovery and a new also both works
If your mtp is not showing in latest try Chinese recovery maybe it works
Mi sim network does not work what can I do? For Brazil
RandomDelta said:
Can anyone please reply? Is MTP transfer working fine for everyone else?
Click to expand...
Click to collapse
I have the same problem as you have with my cm 14 version of my Ray. I just hear the USB-off sound when plugging in and out the USB cable but never saw a drive symbol on my laptop (Windows 7).
I would wish to find the answer why it doesn't work.
However, I found a way out:
The only file transfer method that works fine is USB-OTG.
Hope that helped...
Best wishes.
shaikiffu said:
I have unlocked the bootloader but when I boot into Twrp recovery and Format the Data then I am unable to Enable the USB in the Enable MTP section . So, because of this I am unable to transfer any files and I am unable to root my phone . Please help me . Thank you .
Click to expand...
Click to collapse
Try ADB push command it works.
Prince4le said:
Here is the solution :-
1 open twrp recovery in your phone
2 connect the data cable to your phone and your computer
3 in the recovery click on ENABLE MTP option
4 after that download MINIMAL ADB AND FASTBOOT SOFTWARE IN YOUR COMPUTER i will post the link
5 install it on your pc and copy any file you wanna past and past it in the c drive programme files x86 minimal adb folder
6 than open the cmd by shift and right click open cmd here
7 in cmd type 1st command - adb devices hit enter
2nd. adb push (file name) without breakets /sdcard/.
Done your file will be copied to twrp and now you can easily flash a rom , file etc.
---------- Post added at 05:53 PM ---------- Previous post was at 05:52 PM ----------
Solution posted
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
Minimal adb and fastboot link
https://forum.xda-developers.com/showthread.php?t=2317790
Click to expand...
Click to collapse
Just wanted to let you know you saved my life. 3 Years gone but still helpful. Thanks a heck ton!
For me, it worked by using a USB2 port instead of USB3.