OJ7 root. - T-Mobile Samsung Galaxy S6

After reading dozens of threads I'm at a loss.
1. Can I root?
2. If I root, is my phone still going to work? Or will it become the latest victim of my Beowolf.

Odin twrp then install unikernel inside twrp. Will trip Knox so Samsung pay won't work anymore.

tyrone1 said:
Odin twrp then install unikernel inside twrp. Will trip Knox so Samsung pay won't work anymore.
Click to expand...
Click to collapse
Ok thanks. Not concerned with Sam pay. Citibank and Wells aren't supported.

It works with Citibank cards

stncldtex said:
After reading dozens of threads I'm at a loss.
1. Can I root?
2. If I root, is my phone still going to work? Or will it become the latest victim of my Beowolf.
Click to expand...
Click to collapse
I finally found a routine and the right files needed to successfully acquire root, twrp, and custom ROM. Although, the only custom ROM Iv'e been able to boot and setup with all T-Mobile services intact and even the finger print security feature working, is the "OZOP_EDGE_v11_DOJ7.zip, thanks to stangdriver44".
Just remember you should back up the EFS and backup the phone using Samsung smart switch. If you need help, pm me. Id lay out the exact steps I took to get root originally and what it took to get out of a bricked phone, and finally to root and install a custom ROM.
I will type up what I did later today or tomorrow and post it in case anyone does the same thing to gets bootloops and bricks.
I have to attend to other chores now before I go back to work tomorrow, since I spent every evening for the last week and all day and night yesterday, trying to bring this phone out of brick.
chevy383surfing

tyrone1 said:
It works with Citibank cards
Click to expand...
Click to collapse
Sorry Capital One not Citi.

stncldtex said:
After reading dozens of threads I'm at a loss.
1. Can I root?
2. If I root, is my phone still going to work? Or will it become the latest victim of my Beowolf.
Click to expand...
Click to collapse
chainfire's systemless root BETA v2.61 works flawlessly: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3

pm me.
Id like to know the steps you took to root your s6. pm me whenever possible. Thanks.
chevy383surfing said:
I finally found a routine and the right files needed to successfully acquire root, twrp, and custom ROM. Although, the only custom ROM Iv'e been able to boot and setup with all T-Mobile services intact and even the finger print security feature working, is the "OZOP_EDGE_v11_DOJ7.zip, thanks to stangdriver44".
Just remember you should back up the EFS and backup the phone using Samsung smart switch. If you need help, pm me. Id lay out the exact steps I took to get root originally and what it took to get out of a bricked phone, and finally to root and install a custom ROM.
I will type up what I did later today or tomorrow and post it in case anyone does the same thing to gets bootloops and bricks.
I have to attend to other chores now before I go back to work tomorrow, since I spent every evening for the last week and all day and night yesterday, trying to bring this phone out of brick.
chevy383surfing
Click to expand...
Click to collapse

andrey1186 said:
Id like to know the steps you took to root your s6. pm me whenever possible. Thanks.
Click to expand...
Click to collapse
I will get a write up of the steps. I'll pm you tomorrow afternoon. I planned to do it tonight, but I have a case of the Mondays!

muniz_ri said:
chainfire's systemless root BETA v2.61 works flawlessly: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
How do you flash it?

stncldtex said:
How do you flash it?
Click to expand...
Click to collapse
Install twrp on stock oj7 then flash supersu v2.61 in twrp. that's it.

muniz_ri said:
chainfire's systemless root BETA v2.61 works flawlessly: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
Does this trip KNOX?

chip.hughes said:
Does this trip KNOX?
Click to expand...
Click to collapse
of course

stncldtex said:
How do you flash it?
Click to expand...
Click to collapse
You'd have to setup Cygwin software to make the zip an 'Odin flashable .tar.md5 type file', which I have not had time to play with, in order to flash supersu zip files onto the samsung phones.
I am working on a worksheet right now explaining what I had to do to install 5.1.1 firmware and root the phone. I am still looking back to remember exactly how I unlocked the bootloader. I did have to use an android terminal to map out the twrp recovery manual on the phone itself. I do know it would wise for anyone interested in this to backup the EFS before anything. I had to download a specific windows DOS software that does it in a couple seconds and stores it on your computer. It works for a number of other phones as well. Also need to download the newest Odin 3.10.7 software in order to work with 5.1.1 firmware without any problems. Also need to do a backup of whole phone with samsung smart switch "takes place of Kies software now". When I get home tonight I will get names and locations of everything and inform everyone. If you download the wrong DOJ7 software or firmware you'll mess up your device. It took me a week to find the right software downloads related to 5.1.1 in order to make everything work right. And I did everything within 15 minutes. Once I figured out the routine.
Once you update to 5.1.1 I know of no way to downgrade.
I do recommend going over to serio22's post -[Firmware][Bootloader & Modems][Odin] - G920T - DOJ7-
And download DOJ7 BL and DOJ7 modem and G920TUVU3DOJ7 (firmware). Download Chainfire's latest beta super su.

You can just flash unikernel to get root.
Possibly any of the other kernels too

stncldtex said:
After reading dozens of threads I'm at a loss.
1. Can I root?
2. If I root, is my phone still going to work? Or will it become the latest victim of my Beowolf.
Click to expand...
Click to collapse
Yes you can root .. by flashing unikernel .. and phone will still be working ...

Tried flashing Uni through Odin with no luck. I get this in Odin.
Get PIT for mapping.
Write operation failed.
Any idea's?

stncldtex said:
Tried flashing Uni through Odin with no luck. I get this in Odin.
Get PIT for mapping.
Write operation failed.
Any idea's?
Click to expand...
Click to collapse
I recommend you root with the latest Supersu beta v2.62-3 zip. It will patch the stock kernel which was designed for your specific build unlike the unikernel. Just flash via twrp.

muniz_ri said:
I recommend you root with the latest Supersu beta v2.62-3 zip. It will patch the stock kernel which was designed for your specific build unlike the unikernel. Just flash via twrp.
Click to expand...
Click to collapse
TWRP gives off the same error.

stncldtex said:
TWRP gives off the same error.
Click to expand...
Click to collapse
More accurately trying to Odin TWRP.

Related

[How-To] Root G870AUCU1ANG3 (GS5 Active)

**Make certain that your reactivation lock in security settings is off before beginning this process**
1. Take the NG3 OTA update.
2. Download and install Towelroot-v3.apk(this version does not require internet access).
3. Place your phone into "Download Mode" (press and hold the Home, Volume Down, and Power keys until the phone powers on and displays warning screen, then press Volume Up key) and flash the G870A_NE4_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+).
4. Open the Towelroot app from your app drawer and press "Make it Rain" to root your device.
5. Power off then boot into "Download Mode" again and flash the G870A_NG3_Stock_Kernel also in Odin's PDA slot(AP in Odin v3.09+).
6. Download SuperSu to manage root access. Done!
Troubleshooting:
1. If the NG3 OTA update fails consider flashing the G870AUCU1ANE4_Full_Odin.tar to return to stock then take the NG3 OTA update, (or place the G870A_NE4toNG3_OTA.zip onto your ext-sdcard and sideload from stock recovery). Once updated to NG3 continue to Step 2 above.
2. The most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure.
Notes:
1. After flashing the NE4 kernel your phone may run a little wonky and towelroot may not root on the first try. If that happens reboot and try towelroot once again. Once rooted and after flashing the NG3 kernel your phone will once again run like a champ!
2. The above process will not affect your User Data or Knox Warranty Flag.
Credits:
@lordmorphous - Tester
Gonna try this... Thanks! :beer:
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Yes this worked. Thank you very much.......
Are we going to trip Knox using the method above ???
Just wanna be sure about this. ...g
gregsarg said:
Are we going to trip Knox using the method above ???
Just wanna be sure about this. ...g
Click to expand...
Click to collapse
Nope.
Does anyone have a list of the benefits of updating to NG3?
I just rooted my new phone on NE4 and I want to know whether it's worth taking the time.
Thanks for the How-to! Worked great for me!
Any benefits on ng3 over stock?
Root possible for 'straight out-of-the-box' G870AUCU1ANG3???
I've looked and looked around the forums here and have come to the conclusion that the AT&T S 5 I recently picked up is, sadly, unable to be rooted. Does anyone here know if this is true? As the title suggests, my phone seems to have come loaded with G870AUCU1ANG3. Is it possible that it came with the previous iteration (NE4, I think??) and I didn't avoid an update, thus meaning I can flash the earlier version? Can I even tell whether it's possible to 'revert' to NE4 (or whatever it would be)? Is any of this even possible without having been previously rooted, or am I wasting my time searching this out? Naive but earnest questions... sorry if I'm in the wrong place here. I promise, I poked around the site for a few days in search of clarity before posting.
papayajelly said:
I've looked and looked around the forums here and have come to the conclusion that the AT&T S 5 I recently picked up is, sadly, unable to be rooted. Does anyone here know if this is true? As the title suggests, my phone seems to have come loaded with G870AUCU1ANG3. Is it possible that it came with the previous iteration (NE4, I think??) and I didn't avoid an update, thus meaning I can flash the earlier version? Can I even tell whether it's possible to 'revert' to NE4 (or whatever it would be)? Is any of this even possible without having been previously rooted, or am I wasting my time searching this out? Naive but earnest questions... sorry if I'm in the wrong place here. I promise, I poked around the site for a few days in search of clarity before posting.
Click to expand...
Click to collapse
There shouldn't be any reason why you can't follow the instructions in the 1st post of this thread starting with step 2.

			
				
I've been searching for a while and can't find anything about using this root method and then being able to install safestrap. Has anyone been successful in doing this? Do I need to downgrade before and does anybody have the downgrade file? FYI Just bought my phone last night and was successful in rooting.
rescuedad said:
I've been searching for a while and can't find anything about using this root method and then being able to install safestrap. Has anyone been successful in doing this? Do I need to downgrade before and does anybody have the downgrade file? FYI Just bought my phone last night and was successful in rooting.
Click to expand...
Click to collapse
Never mind, I figured it out. If you have the active you need to downgrade the kernel to NE4 like you do if you need root. Then you install Safestrap 3.75. I'm doing a Nandroid backup as I type. I'm going to re-flash the NG3 stock kernel when I'm done and hopefully that will be fine.
If it bricks, I can always take it back since I blocked the knox counter... BTW I'm on At&T
I downgraded to the NE4 to root. Along with others here I have to ask, what are, if any, benefits to upgrading the kernel?
panthersdzynes said:
I downgraded to the NE4 to root. Along with others here I have to ask, what are, if any, benefits to upgrading the kernel?
Click to expand...
Click to collapse
Not sure I understand the question but I will take a shot......typically the kernel, modules, and non-hlos.bin have to match or else you may experience issues such as no wifi, lag, etc. The NE4 and NG3 kernel and modules may be similar enough that you will not experience issues immediately but they may develop later unless you reflash the NG3 kernel to match your modules and non-hlos.
muniz_ri said:
Not sure I understand the question but I will take a shot......typically the kernel, modules, and non-hlos.bin have to match or else you may experience issues such as no wifi, lag, etc. The NE4 and NG3 kernel and modules may be similar enough that you will not experience issues immediately but they may develop later unless you reflash the NG3 kernel to match your modules and non-hlos.
Click to expand...
Click to collapse
I see. Thank you, that answers my question.
THanks XDA
Been away along time. Had iphones for the last 6 years. Use to go here all the time in the Kaiser days (Att Tilt) if any of you remember. I see XDA has still been kicking ass while I've been gone! Glad to be back and Thank You everyone especially first poster for the guide to root my Att GS5 Active.
THANK YOU
Working perfectly. ..thank you. ..g
There was a small update released today. Can someone that is rooted grab it from their fota/cache folder and send to me so that I can update this guide? Thanks.
WORKED! AWESOME!
Now... I have installed SuperSU. Was that left out of the first post?
Also, if I do not flash the NG3 Stock Kernel back afterwards, will I experience funkiness?
Thanks again!

[Q] Att Note 3 on Lollipop

I have a note 3, that I'd like to root and install a non Att OS.. it's no longer a covered phone..and I don't care about tripping knox.. Searching for Root and Note 3 and ATT find all kind of way to root and install safestrap.. is that the only way to custom rom this phone?
crysallis said:
I have a note 3, that I'd like to root and install a non Att OS.. it's no longer a covered phone..and I don't care about tripping knox.. Searching for Root and Note 3 and ATT find all kind of way to root and install safestrap.. is that the only way to custom rom this phone?
Click to expand...
Click to collapse
What are you running right now Kitkat, Lollipop? If you are on N900AUCUCNC2, you can use Towel root https://towelroot.com/ or Kingo root http://www.kingoapp.com/ The only way to install custom rom is to have Safestrap install as the bootloader is locked.
Rooted i747 said:
What are you running right now Kitkat, Lollipop? If you are on N900AUCUCNC2, you can use Towel root or Kingo root
Click to expand...
Click to collapse
I'm not the OP, but I have the same question: I have a stock Note 3 with Lollipop (N900AUCUEOC1). I'd love to root it. Is there a step-by-step guide, or better yet a tap-and-go app to achieve root?
Hiram_Q_Pustule said:
I'm not the OP, but I have the same question: I have a stock Note 3 with Lollipop (N900AUCUEOC1). I'd love to root it. Is there a step-by-step guide, or better yet a tap-and-go app to achieve root?
Click to expand...
Click to collapse
You can't root OC1, but you can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613. Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604
Brilliant! I'm rooted on Lollipop, and loving my Note 3 all over again. Thanks for the easy-to-follow instructions, that made it a breeze!
lil differant way
To shorten the process, I downloaded Chainfires app called FlashFire, Then Downloaded full OC1 odin tar and Full N2 Odin tar. I flashed Note 3 back to N2 with pc odin, I then transferred OC1 to my sd card installed Flashfire and used flash Fire to do a complete flash to OC1 while choosing to inject everroot. Saved tons of time and in my mind a lot cleaner. I also have ROM PRO TOOL BOX and Chainfires CF-Bench after installing all the apps I wanted and setting up my personal settings on the phone all together, I installed BusyBox Pro and did a smart install, then rebooted and performed a benchmark. Then opened Rom Pro Tool box and went to cpu and then the benchmark it recognized the benchmark from chainfires cf-bench app so I choose it and also clicked apply at boot. Rebooted and this Note is fast as light and reliable. FlashFire will make back ups for you if your worried about recovery and always a good Idea to have Helium and or Titanium to make a nandriod and a completed setup back up to store on your pc and cloud just in case. :fingers-crossed:
Does anyone know if Rooting directly from OC1 without a wipe is being worked on? :fingers-crossed: or should I just stop whining and just do one of the above options? :victory:
debugrr said:
Does anyone know if Rooting directly from OC1 without a wipe is being worked on? :fingers-crossed: or should I just stop whining and just do one of the above options? :victory:
Click to expand...
Click to collapse
Do from post #4
Help! Stuck on AT&T load screen after Odin
Followed post 4 instructions, but after Odin (which said PASS!), phone is now stuck on white boot screen with AT&T logo. Checked md5, everything checks out. What do you think went wrong?
camkatastrophe said:
Followed post 4 instructions, but after Odin (which said PASS!), phone is now stuck on white boot screen with AT&T logo. Checked md5, everything checks out. What do you think went wrong?
Click to expand...
Click to collapse
What was you running before, Lollipop? If you was, you need to do all four files not the All-In-One to change your boot loader back to NC2.
so much simpler
Thanks for making this simpler! If all goes well then you will be donated to good sir! now if you could just get someone on my at&t s5 active!
dwillimon said:
now if you could just get someone on my at&t s5 active!
Click to expand...
Click to collapse
I have a s5active and just love the hell out of it. I'm still kinda green with the rooting but have done several successful roots, but development is way out of my wheelhouse. Unfortunately I haven't found a developer that had been working on the active. I'm still looking though. Thanks for doing the outstanding organization you did for the note 3. I'm going to be doing it as soon as the laptop comes back from the shop. My wife will like fire cat I think. I just found the thread I needed for my active lol only one rim but better than nothing.
Hey all, I've been away since the Skyrocket days. For ODIN, what state does the phone need to be in. I have USB debugging Enabled, but the ODIN says Failed. I downloaded all 4 files. Nevermind, had to put the phone in download mode.
i used KingoRoot to "root" it said it was sucessful, but when i try SuperSU it said "SuperSu Binary needs to be updated. Continue"? when i click continue, i click on normal and it says "Installing, please wait" then it returns failed.. SuperSu binary is not updating what is the fix for this?
Kid27085 said:
i used KingoRoot to "root" it said it was sucessful, but when i try SuperSU it said "SuperSu Binary needs to be updated. Continue"? when i click continue, i click on normal and it says "Installing, please wait" then it returns failed.. SuperSu binary is not updating what is the fix for this?
Click to expand...
Click to collapse
I would install Root Checker https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en to see if your root is properly installed. You might have to use KingoRoot again. I usually stick with Towelroot.
i tried superuser and that said it might not have installed properly. I tried flashing the ODIN files again and now it says failed. I think i've bricked my phone and now im really frustrated
Kid27085 said:
i tried superuser and that said it might not have installed properly. I tried flashing the ODIN files again and now it says failed. I think i've bricked my phone and now im really frustrated
Click to expand...
Click to collapse
Can you get into download mode?
Rooted i747 said:
Can you get into download mode?
Click to expand...
Click to collapse
ok i have just gotten mad and constantly click on the start button in ODIN until it seemed to have worked. Well.. glad to say, my phone is up and running with 4.4.2 , rooted with TowelRoot, Installed SuperSu and installed BusyBox... now to find a cool rom to run it on. Thanks for all the help guys.
Rooted i747 said:
You can't root OC1, but you can use Odin to downgrade to NC2 and root it. Odin v.3.10.6 http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613. Once you Odin back you can use Towel root or Kingo root (links are posted above your post). Then install Supersu https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and run it, install Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en open and install it, then Safestrap http://forum.xda-developers.com/devdb/project/dl/?id=7216. (You should make a backup once Safestrap is installed before you flash any Roms). Once you're done you can pick a Rom for your Note 3 http://forum.xda-developers.com/note-3-att/development Now you ever use Odin? http://www.samsungodindownload.com/odin-tutorial/ (The site only shows flashing the All-In-One file so you know). Use all 4 Odin files, N900AUCUCNC2 ODIN Files, BL https://www.androidfilehost.com/?fid=96042739161891602 AP https://www.androidfilehost.com/?fid=96042739161891890 CP https://www.androidfilehost.com/?fid=96042739161891603 CSC https://www.androidfilehost.com/?fid=96042739161891604
Click to expand...
Click to collapse
Thanks for this.
My note 3 is on OC2 and running Android 5.0.
Does this instruction work for my phone?
Thanks

[Q] Anyway to root the new G920TUVU4EPF1 Build?

Running stock 6.0.1 on my G920T, updated OTA. I've tried flashing TWRP, but ends up stuck at the Samsung Logo...
The new firmware prevents downgrading too, so I can't really downgrade without doing some changes...
If I can't root, are there any root kernels/custom roms available? (That support the EPF1 update)
Any help would be greatly appreciated.
msoza1 said:
Running stock 6.0.1 on my G920T, updated OTA. I've tried flashing TWRP, but ends up stuck at the Samsung Logo...
The new firmware prevents downgrading too, so I can't really downgrade without doing some changes...
If I can't root, are there any root kernels/custom roms available? (That support the EPF1 update)
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Google cf auto root and go to their website and then find the right file for the s6 (should be zerofltemo or something like that). Download the latest version of odin if you don't already have it. Click the ap button once odin is open and select the cf auto root file you downloaded. Put your phone into download mode and connect it to your computer and hit start in odin. If everything goes well it will install root then you can flash twrp via odin also. There's a thread with more detailed instructions on here if you search for it
kenpachi100 said:
Google cf auto root and go to their website and then find the right file for the s6 (should be zerofltemo or something like that). Download the latest version of odin if you don't already have it. Click the ap button once odin is open and select the cf auto root file you downloaded. Put your phone into download mode and connect it to your computer and hit start in odin. If everything goes well it will install root then you can flash twrp via odin also. There's a thread with more detailed instructions on here if you search for it
Click to expand...
Click to collapse
I've already looked through CF's auto root, there isn't one (fully) compatible with build #G920TUVU4EPF1. I've tried using an eariler build (MMB29K.G920TUVU3EPD1 of auto root), which softbricked my phone, it's fine now but I'm not risking that again. Thanks for the help anyway!
msoza1 said:
I've already looked through CF's auto root, there isn't one (fully) compatible with build #G920TUVU4EPF1. I've tried using an eariler build (MMB29K.G920TUVU3EPD1 of auto root), which softbricked my phone, it's fine now but I'm not risking that again. Thanks for the help anyway!
Click to expand...
Click to collapse
You're right there isn't one for our specific build but that one will work because it's the one I used. You have to enable your developer options and turn on oem unlock and it won't soft brick. Sorry forgot to mention that part lol
msoza1 said:
I've already looked through CF's auto root, there isn't one (fully) compatible with build #G920TUVU4EPF1. I've tried using an eariler build (MMB29K.G920TUVU3EPD1 of auto root), which softbricked my phone, it's fine now but I'm not risking that again. Thanks for the help anyway!
Click to expand...
Click to collapse
Let me know if it works after doing that
Sent from my SM-G920T using XDA-Developers mobile app
Look at Post #7, I expanded on everything you need to do to root it. http://forum.xda-developers.com/tmo...w-to-root-samsung-galaxy-s6-sm-g920t-t3382856
Thanks everyone! I'm Rooted. I looked at everyone's solutions, but decided to take my own. Using Idlekernel TWRP, I was able to install TWRP & Root from there.
msoza1 said:
Thanks everyone! I'm Rooted. I looked at everyone's solutions, but decided to take my own. Using Idlekernel TWRP, I was able to install TWRP & Root from there.
Click to expand...
Click to collapse
Can you let me know which one you use , i have G920T PF1

root

hi,
I would love to root my sm-g800f.
Which guide should I follow?
Thanks
What ROM? You can try flashing the correct CF Auto Root for your phone model and Android version using Odin if it using the latest Lollipop.
lfom said:
What ROM? You can try flashing the correct CF Auto Root for your phone model and Android version using Odin if it using the latest Lollipop.
Click to expand...
Click to collapse
I have to look, so, for 'CF Auto Root' for G800FXXU1BPC3 Lollipop MR1 and
Odin.
Odin goes on PC and
CF Auto Root goes on device.
Am I right?
Both files go on PC, you used Odin to flash CF Auto Root into mobile. Seek for the files in the official page:
https://autoroot.chainfire.eu/
There are many videos on YouTube about it as most Samsung phones are rooted this way. Just make sure you use the correct file for your phone (G800F).
Backup everything you can first in case something goes wrong you may need to wipe mobile data and reflash stock ROM.
The other option is to use Odin to flash TWRP and then flash SuperSU zip from Chainfire. First, TWRP goes on PC then SuperSU Zip on phone, that you flash using TWRP. I am sure there are tutorials here about it, just pick TWRP for G800F, SuperSU is universal but some version may be needed according to your Android version. Can't help more because I have G800H and not rooted as Marshmallow was released for it and it has all I need. Good luck.
lfom said:
Both files go on PC, you used Odin to flash CF Auto Root into mobile. Seek for the files in the official page:
https://autoroot.chainfire.eu/
There are many videos on YouTube about it as most Samsung phones are rooted this way. Just make sure you use the correct file for your phone (G800F).
Backup everything you can first in case something goes wrong you may need to wipe mobile data and reflash stock ROM.
The other option is to use Odin to flash TWRP and then flash SuperSU zip from Chainfire. First, TWRP goes on PC then SuperSU Zip on phone, that you flash using TWRP. I am sure there are tutorials here about it, just pick TWRP for G800F, SuperSU is universal but some version may be needed according to your Android version. Can't help more because I have G800H and not rooted as Marshmallow was released for it and it has all I need. Good luck.
Click to expand...
Click to collapse
first way, I think, should be more simple.
How silly, I would root to change fonts on device.
And of course to free space, delete junkie and have control of my device.
Marshmallow is going to make me regret rooting?
You can change fonts using atock, no root needed. Also use Debloater to disable junk, no root needed either.
You can't use OTA to upgrade to MM when it arrives as it usually won't install or bootloops, so you will need to flash MM to go back to stock and upgrade then root again. Flashfire from Chainfire would be able to install OTAKU and keep root, but support to S5 mini is unkonwm, and no reports of success as far as I know.
Last but not least, flashing anything other than stock ROM through Odin will trip a Knox security counter and you'll lose warranty.
lfom said:
You can change fonts using atock, no root needed. Also use Debloater to disable junk, no root needed either.
You can't use OTA to upgrade to MM when it arrives as it usually won't install or bootloops, so you will need to flash MM to go back to stock and upgrade then root again. Flashfire from Chainfire would be able to install OTAKU and keep root, but support to S5 mini is unkonwm, and no reports of success as far as I know.
Click to expand...
Click to collapse
I don' t uderstand.
I'm stock. If I'll root I'll not be anymore stock.
If I don't root, will MM arrive OTA?
lfom said:
Last but not least, flashing anything other than stock ROM through Odin will trip a Knox security counter and you'll lose warranty.
Click to expand...
Click to collapse
I know
dezuha said:
I don' t uderstand.
I'm stock. If I'll root I'll not be anymore stock.
If I don't root, will MM arrive OTA?
Click to expand...
Click to collapse
Yes, when it's available for your phone model, as long as you're stock. Sorry, wasn't clear before.
lfom said:
Yes, when it's available for your phone model, as long as you're stock. Sorry, wasn't clear before.
Click to expand...
Click to collapse
you are joking!
You are very nice in answering to my questions.
''fonts using atock'', I think I can't.
I can only use payment monotype fonts
dezuha said:
you are joking!
You are very nice in answering to my questions.
''fonts using atock'', I think I can't.
I can only use payment monotype fonts
Click to expand...
Click to collapse
This is using stock MM on my G800H, I don't remember on Lollipop but I'm almost sure there was a similar option:
http://forum.xda-developers.com/galaxy-s5-mini/general/guide-easiest-method-root-g800h-t3340949
http://forum.xda-developers.com/galaxy-s5-mini/general/sm-g800f-rooting-guide-t3164859
I have found these two guides.
Which one do I have to follow?
lfom said:
This is using stock MM on my G800H, I don't remember on Lollipop but I'm almost sure there was a similar option:
Click to expand...
Click to collapse
I have those 5 ones.
But I would like other fonts.

Root for people on G920TUVU5EQC2

Okay, so thanks to this thread here: https://forum.xda-developers.com/tmo...t3382856/page6 and the person who did it (to my knowledge) @AZWildcat
Copy & pasted @ktrinh4213
1) Update Your Samsung Galaxy S6 SM-G920T T Mobile to Marshmallow If You Didn't Done Yet -- CF-Auto Root works on all versions of Android thus far. "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.zip"
2) Download CF-Auto-Root Samsung Galaxy S6 SM-G920T T Mobile 6.0.1 Marshmallow.Just Search it in Google And download From Chainfire
3) Download And Install the Samsung USB Driver in your PC.
4) Extract the CF-Auto-Root files in your PC.
5) Go to Settings->About Device->Tap Build Number until Developer Options is unlocked.
6) Go back to Settings-> Developer Options-> Toggle OEM Unlock. This will prevent your device from being soft-bricked (and save you time downloading and reinstalling the OEM ROM).
7) Switch off your Mobile. Enter into Download mode->Volume Down+Home+Power Buttons.
8) After entering into Download Mode it will say Warning Press Volume Up button to continue.
9) Connect Your Mobile With PC via USB Cable.
10) Launch Odin Application.It Will Show the message "ADDED!!!". If you did not get this message Repeat the above steps.
11) After Getting Added Message Select PDA Button then Browse for the CF-Auto-Root file. If using Odin 10.x, look for the AP button, and search for the CF-Auto Root file. Select it. Where the messages populate, go to the Options tab. Tick the Auto reboot. THIS WILL TRIP KNOX.
12) Press Start wait for the tasks to complete.It may enter into Recovery mode to add the SuperSu permissions.
13) Reboot again.
You can See the Superuser after the Reboot in your Applications list.
Sorry if I did tagging wrong I usually lurk
Flash TWRP and then the SuperSU ZIP.
Also auto root still work. At least it did on mine phone
britchel said:
Also auto root still work. At least it did on mine phone
Click to expand...
Click to collapse
The baseband isn't listed on Autoroot which is why I've not used it.
Obievil said:
The baseband isn't listed on Autoroot which is why I've not used it.
Click to expand...
Click to collapse
That is the same reason I havent either ;-;
EncryptedCurse said:
Flash TWRP and then the SuperSU ZIP.
Click to expand...
Click to collapse
sorry it has been a long time since i rooted my phone i know how to install twrp and supersu but how does just installing supersu root my phone i thought you had to have a rooted phone to install supersu
britchel said:
Also auto root still work. At least it did on mine phone
Click to expand...
Click to collapse
what was your base?
timspotatochips said:
sorry it has been a long time since i rooted my phone i know how to install twrp and supersu but how does just installing supersu root my phone i thought you had to have a rooted phone to install supersu
Click to expand...
Click to collapse
Super SU does require root. I was confused by his answer as well. I wondered if I could use the latest Base for my phone from Autoroot but I'm not willing to risk it without knowing for sure.
Obievil said:
Super SU does require root. I was confused by his answer as well. I wondered if I could use the latest Base for my phone from Autoroot but I'm not willing to risk it without knowing for sure.
Click to expand...
Click to collapse
Yeah haha well i dont mind testing it in a few weeks and I can let you know unbricking usually isnt hard just flashing stock usually will fix it I was also curious if I could downgrade by flashing stock roms cause i dont care about knox
timspotatochips said:
what was your base?
Click to expand...
Click to collapse
EQC1, I think... the one before this one... there's actually a tread on how to root s6 with mm
britchel said:
EQC1, I think... the one before this one... there's actually a tread on how to root s6 with mm
Click to expand...
Click to collapse
oh okay do you have the link please and thank you ))?
timspotatochips said:
Yeah haha well i dont mind testing it in a few weeks and I can let you know unbricking usually isnt hard just flashing stock usually will fix it I was also curious if I could downgrade by flashing stock roms cause i dont care about knox
Click to expand...
Click to collapse
My phone is out of contract so I don't care about knox anymore, It's been so long I am still a little afraid of bricking it. the last phone I rooted was the Galaxy S3, believe it or not lol!
Obievil said:
My phone is out of contract so I don't care about knox anymore, It's been so long I am still a little afraid of bricking it. the last phone I rooted was the Galaxy S3, believe it or not lol!
Click to expand...
Click to collapse
oh dang last phone I rooted was my nexus 6 and knox is useless im sure you can still encrypt your phone without it and well samsung pay is ass and you can get a new kernal for fingerprint scanner if it no longer works but ill let you know if I am able to root my phone I assume youre on the same firmware as me?
timspotatochips said:
oh dang last phone I rooted was my nexus 6 and knox is useless im sure you can still encrypt your phone without it and well samsung pay is ass and you can get a new kernal for fingerprint scanner if it no longer works but ill let you know if I am able to root my phone I assume youre on the same firmware as me?
Click to expand...
Click to collapse
Yes I am, it's how I landed on this thread.
Obievil said:
Yes I am, it's how I landed on this thread.
Click to expand...
Click to collapse
haha i assumed so just wanted to clarify
Just out of stupidity, and morbid curiosity I tried to Autoroot the last known good rom from that site. And it failed with a FRP lock error message. I'm surprised it didn't brick.
Hey why don't you make your own rom. Pretty easy... you customize it to your like, I made mine and it's pretty stable. And it roots it from pc
britchel said:
Also auto root still work. At least it did on mine phone
Click to expand...
Click to collapse
britchel said:
Hey why don't you make your own rom. Pretty easy... you customize it to your like, I made mine and it's pretty stable. And it roots it from pc
Click to expand...
Click to collapse
I don't think you understand. The rom isn't the issue here, It's getting root access that's the problem.
Okay, so thanks to this thread here: https://forum.xda-developers.com/tm...oot-samsung-galaxy-s6-sm-g920t-t3382856/page6 and the person who did it (to my knowledge) @AZWildcat
Copy & pasted @ktrinh4213
1) Update Your Samsung Galaxy S6 SM-G920T T Mobile to Marshmallow If You Didn't Done Yet -- CF-Auto Root works on all versions of Android thus far. "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.zip"
2) Download CF-Auto-Root Samsung Galaxy S6 SM-G920T T Mobile 6.0.1 Marshmallow.Just Search it in Google And download From Chainfire
3) Download And Install the Samsung USB Driver in your PC.
4) Extract the CF-Auto-Root files in your PC.
5) Go to Settings->About Device->Tap Build Number until Developer Options is unlocked.
6) Go back to Settings-> Developer Options-> Toggle OEM Unlock. This will prevent your device from being soft-bricked (and save you time downloading and reinstalling the OEM ROM).
7) Switch off your Mobile. Enter into Download mode->Volume Down+Home+Power Buttons.
8) After entering into Download Mode it will say Warning Press Volume Up button to continue.
9) Connect Your Mobile With PC via USB Cable.
10) Launch Odin Application.It Will Show the message "ADDED!!!". If you did not get this message Repeat the above steps.
11) After Getting Added Message Select PDA Button then Browse for the CF-Auto-Root file. If using Odin 10.x, look for the AP button, and search for the CF-Auto Root file. Select it. Where the messages populate, go to the Options tab. Tick the Auto reboot. THIS WILL TRIP KNOX.
12) Press Start wait for the tasks to complete.It may enter into Recovery mode to add the SuperSu permissions.
13) Reboot again.
You can See the Superuser after the Reboot in your Applications list.
Sorry if I did tagging wrong I usually lurk
This worked, I just rooted my device! Thank you for linking this!

Categories

Resources