Related
I just unrooted my moto g xt1068 and flashed stock rom. But for some reasons i am unable to relock the bootloader. Just want to know that will I be able to receive OTA updates even when the bootloader is unlocked or should i have to relock the bootloader?
why nobody answered my questions yet? Plz reply soon
sandy1636 said:
I just unrooted my moto g xt1068 and flashed stock rom. But for some reasons i am unable to relock the bootloader. Just want to know that will I be able to receive OTA updates even when the bootloader is unlocked or should i have to relock the bootloader?
Click to expand...
Click to collapse
Unlocked bootloader, doesn't matter with updates, or system flash..only when one needs Root, then the bootloader needs unlocked, unless a Root exploit is used..
sent by my
5.0_22.11.6 Lollipop (Rooted)
TWRP v2.8.0.1-titan
UPDATE-SuperSU-v2.16
XT1064 Moto G (2nd Gen.)
http://waynekent.com/page6.html
"Praise Jah" YOU people.!
Try this:
Flash Stock firmware using these commands in this order:
Code:
[B]mfastboot.exe oem lock begin[/B]
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
[B]mfastboot.exe oem lock[/B]
mfastboot.exe reboot
Hope this helps
KrishnaSagar said:
Flash Stock firmware using these commands in this order:
Code:
[B]mfastboot.exe oem lock begin[/B]
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
[B]mfastboot.exe oem lock[/B]
mfastboot.exe reboot
Hope this helps
Click to expand...
Click to collapse
i have already entered all these commands and successfully flashed stock rom. But when i enter mfastboot.exe oem lock, its shows as (bootloader) sst lock failure.
That is the standard procedure, but if you are getting errors then please refer to this thread:
http://forum.xda-developers.com/moto-g-2014/general/guide-explaining-boot-loader-locking-t2933827
KrishnaSagar said:
That is the standard procedure, but if you are getting errors then please refer to this thread:
http://forum.xda-developers.com/moto-g-2014/general/guide-explaining-boot-loader-locking-t2933827
Click to expand...
Click to collapse
I have followed the exact steps as mentioned in this thread. But still unable to relock the bootloader.
But I read somewhere that i can still get OTA updates even if bootloader is unlocked as long as i am in stock firmware and recovery. Is that true?
sandy1636 said:
I have followed the exact steps as mentioned in this thread. But still unable to relock the bootloader.
But I read somewhere that i can still get OTA updates even if bootloader is unlocked as long as i am in stock firmware and recovery. Is that true?
Click to expand...
Click to collapse
Yes. OTA updates are available on Unlocked Bootloader as long as you dont Root or change the recovery.
Thread hijack: If you have an unlocked bootloader and rooted xt1068 (and using Philz kernel) on the stock ROM, can you expect to get the OTA update?
I'm finding conflicting responses to this on searching and if I need to go back to stock recovery would happily do that, but I don't want to wipe my device.
grayme said:
Thread hijack: If you have an unlocked bootloader and rooted xt1068 (and using Philz kernel) on the stock ROM, can you expect to get the OTA update?
I'm finding conflicting responses to this on searching and if I need to go back to stock recovery would happily do that, but I don't want to wipe my device.
Click to expand...
Click to collapse
We shall see when the OTA is pushed to blighty. My advice would be to backup the boot, recovery and system partitions in their factory state before tinkering. I just rooted the stock ROM by booting from a TWRP image via fastboot, installed SuperSU and then used dd to image /boot, /recovery and /system to an external SD. If the OTA fails due to me having installed Xposed and removed system apps, I'll just restore the /system image and remove SuperSU... A wipe of the /data partition shouldn't be required.
If the OTA fails for you, I'd suggest flashing back the stock boot, recovery, and system images from the stock retgb firmware zip using fastboot and then trying the OTA upgrade process again.
rufflove said:
We shall see when the OTA is pushed to blighty. My advice would be to backup the boot, recovery and system partitions in their factory state before tinkering. I just rooted the stock ROM by booting from a TWRP image via fastboot, installed SuperSU and then used dd to image /boot, /recovery and /system to an external SD. If the OTA fails due to me having installed Xposed and removed system apps, I'll just restore the /system image and remove SuperSU... A wipe of the /data partition shouldn't be required.
If the OTA fails for you, I'd suggest flashing back the stock boot, recovery, and system images from the stock retgb firmware zip using fastboot and then trying the OTA upgrade process again.
Click to expand...
Click to collapse
It's probably a bit late for me to use dd before I installed Xposed. Thankfully I did back up using CWM before I wiped in installing Lollipop from a thread on here. I think I'll just wait till Motorola decides to push OTA over here.
grayme said:
It's probably a bit late for me to use dd before I installed Xposed. Thankfully I did back up using CWM before I wiped in installing Lollipop from a thread on here. I think I'll just wait till Motorola decides to push OTA over here.
Click to expand...
Click to collapse
Aye, but you should be able to flash back the stock system image from the 4.4.4 release using Motorola's fastboot. I dunno if the standard fastboot or any of custom recovery distros support sparse images. There must also be some way of converting the partial, sparse files into a normal image, too... I guess the questions is whether it's more of faff to start from a formatted data partition, or not.
rufflove said:
Aye, but you should be able to flash back the stock system image from the 4.4.4 release using Motorola's fastboot. I dunno if the standard fastboot or any of custom recovery distros support sparse images. There must also be some way of converting the partial, sparse files into a normal image, too... I guess the questions is whether it's more of faff to start from a formatted data partition, or not.
Click to expand...
Click to collapse
I used to understand these phones, but everything just seems so much more complicated these days!
I'm getting old.
Hi,
I have a Brazilan version XT1097, bootloader unlocked but no root yet.
I cannot install anything from play store because I get an error that does not say much.
All I did was trying to root using a guide I found that tells you to use CF-Autoroot, but it just did not work.
Then I installed TWRP to see if there was any ROMs available since I came from the Nexus 5 and was used to see tons of ROMs on xda to grab and flash.
To my surprise, none is available so far.
Now I am trying to find the original 1097 images to flash on my device and go back to stock.
Might even give up on root, if necessary, but I need the phone back
Any ideas on how to proceed?
A different problem now
The user seco2004 (http://forum.xda-developers.com/member.php?u=4946010) has provided me with his backup image.
I followed the steps on the motorola website to flash all the files but my phone is stuck at the bootloader warning message, that one that says that the bootloader is unlocked.
When I entered TWRP to wipe all over again, it says there is no system installed...
Any pointers are most welcome!
leandroqm said:
The user seco2004 (http://forum.xda-developers.com/member.php?u=4946010) has provided me with his backup image.
I followed the steps on the motorola website to flash all the files but my phone is stuck at the bootloader warning message, that one that says that the bootloader is unlocked.
When I entered TWRP to wipe all over again, it says there is no system installed...
Any pointers are most welcome!
Click to expand...
Click to collapse
I'm not sure if this is what you tried before, but there's pretty much no chance of anything going wrong if you follow the commands:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img (maybe you missed this part? instead of the "system.img", you need to flash the system files one at a time, something like: mfastboot flash system systemfile_1.img, the mfastboot flash system systemfile_2.img, and then proceed with the commands below)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
After all this the phone should boot normally into stock 4.4.4. Sorry for the delay, Tapatalk didn't notify me , hope you got it fixed already.
seco2004 said:
I'm not sure if this is what you tried before, but there's pretty much no chance of anything going wrong if you follow the commands:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img (maybe you missed this part? instead of the "system.img", you need to flash the system files one at a time, something like: mfastboot flash system systemfile_1.img, the mfastboot flash system systemfile_2.img, and then proceed with the commands below)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
After all this the phone should boot normally into stock 4.4.4. Sorry for the delay, Tapatalk didn't notify me , hope you got it fixed already.
Click to expand...
Click to collapse
Yes, I dit it that same night (morning, I should say) by the very same process you described.
Thank you a lot for the images and responses!
leandroqm said:
Yes, I dit it that same night (morning, I should say) by the very same process you described.
Thank you a lot for the images and responses!
Click to expand...
Click to collapse
Did you get it working?
Sent from my XT1097 using Tapatalk
seco2004 said:
Did you get it working?
Sent from my XT1097 using Tapatalk
Click to expand...
Click to collapse
Yes, absolutely!
I upgraded it to lollipop and rooted right afterwards
How did you get a 1097 stock Lollipop image?
TheAquanox said:
How did you get a 1097 stock Lollipop image?
Click to expand...
Click to collapse
secco2004 shared me his backups
But is it 1097 lollipop or 1095 with the módem from 1097? Can you share dais backup? I'm Being unable to tether and would like to find out if it is the rom or the phone.
Greetings !
It was actually the KK 4.4.4 original images.
I had to update to lollipop right after via OTA.
IDK if secco2004 allows me to share it. Could you PM him, please?
He posted recently on the topic.
Yeah, it was actually the 4.4.4 Brazilian firmware, feel free to share it. For lollipop I have just the flasheable zip.
Sent from my XT1097 using Tapatalk
Since secco2004 said it is ok to share, tell me if you want me to sent it somewhere...
It is the XT1097 4.4.4 brazilian original images.
hey, can I have XT1097 stock images please?
I also need it
I flashed NX CM12.1 v3.0 rom and lost gps.
Someone in the thread said that i have to go back to stock, verify gps is working properly... blah, blah, blah.....
So the thing is that i don´t know what stock image to use on my phone and where to get it.
It is a XT1097.
Can any of you guys help me?
Need help please
I've flashed ATT_XT1097_5.0.2_system_ ext4_ root.zip using Mofo.exe and followed directions to the T but soon as its done flashing I reboot back into fastboot mode to wipe the cache but gives me error hab check failed for recovery failed to validate recovery image boot up failed. Please any help would be a life savor i'm lost. Anyone know where to find recovery.img file for Moto X XT1097 stock image file maybe I can flash in fastboot mode? I just hope I Dont have a bricked device. I am stuck in bootloop mode and can't wipe cache.
Thanks!
I really thank you, it worked for me! :good:
Hi All!
Here is my situation, I have a moto g xt1072 (Jan 2016) which came with a faulty problem, no sound after 5 seconds of been started. I checked everything (Factory reset via recovery), including both speakers, (both working at 7.5 ohms). Do you think a firmware change or a different ROM can help or it's time to let it go?
Base band: M8926_309101.02.03.19R THEA_EMEA_CUST
Kernel: 3.4.42-gef77327 [email protected] #1
System Version: 24.41.34.thea_retes.retesall.en.EU retes
Complation numer: MPB24.65-34
Everything is stock, no changes were made.
Thanks in advance!!!
@lost101
did you look here
http://forum.xda-developers.com/moto-g-lte
sd_shadow said:
did you look here
http://forum.xda-developers.com/moto-g-lte
Click to expand...
Click to collapse
Yep, if you are familliar with this process could you mind writing me a list of steps in order? I'll investigate 1 by 1 later, I've found so much info that's confusing. My phone is unlcock for any cellphone company, but It's not root, it's stock.
I used to install custom ROM's on my old Defy + but I things are very different now for what I'm seening. :S
Fastboot flash the latest full factory firmware image for your model.
mfastboot download: https://www.androidfilehost.com/?fid=24052804347778493
XT1072 Retail Spain Android 6.0 Factory Firmware Image: https://www.androidfilehost.com/?fid=24533103863143791
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219 (See specific fastboot commands below)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
murrayhawk said:
Yep, if you are familliar with this process could you mind writing me a list of steps in order? I'll investigate 1 by 1 later, I've found so much info that's confusing. My phone is unlcock for any cellphone company, but It's not root, it's stock.
I used to install custom ROM's on my old Defy + but I things are very different now for what I'm seening. :S
Click to expand...
Click to collapse
please dont mess up the flash.. because then you're pretty much ****ed.. as far ive seen and read and heard and tried, there will be no fix..
lost101 said:
Fastboot flash the latest full factory firmware image for your model.
mfastboot download: https://www.androidfilehost.com/?fid=24052804347778493
XT1072 Retail Spain Android 6.0 Factory Firmware Image: https://www.androidfilehost.com/?fid=24533103863143791
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219 (See specific fastboot commands below)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Click to expand...
Click to collapse
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
ora69 said:
please dont mess up the flash.. because then you're pretty much ****ed.. as far ive seen and read and heard and tried, there will be no fix..
Click to expand...
Click to collapse
I don't have anything to lose, this phone is rebooting itselft every 2 minutes.
murrayhawk said:
I don't have anything to lose, this phone is rebooting itselft every 2 minutes.
Click to expand...
Click to collapse
please, if anything gives a fail, post it on the thread! I myself have hard bricked this device, and now im trying to find the testpoint for it, ive already invested hours into this.. and i have no progress!, its worth it to post it on a thread
murrayhawk said:
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
Click to expand...
Click to collapse
The guide I linked to is not about downgrading. Ignore references to Android 4.3 - it still applies to Android 6.0. It sounds like you have not installed the usb drivers for your phone in Windows. This is a prerequisite. These Moto G drivers will also work for your phone:
Moto G USB Drivers (WinXP/7/8/10 32Bit-64Bit)
Test Fastboot is working by typing: fastboot devices
You may also be able to use RSD Lite - but this again will require you have installed USB drivers for your phone.
murrayhawk said:
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
Click to expand...
Click to collapse
my opinion is use RSD lite first, unless there is not a specific firmware file for your carrier/region...
or there is a high rate of flashing failure with the firmware available.
if RSD lite fails, best to post errors from pc and phone here
before try again, if there's not an obvious fix
then try mfastboot.exe
fastboot.exe is generic android, mfastboot.exe is Motorola specific, for moto's unique system.img...
avoid usb 3.0 ports
make sure the firmware downloaded is correct size, verified MD5 is best.
verify drivers are correct when the device is in fastboot mode
I have generic moto instructions in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
sd_shadow said:
my opinion is use RSD lite first, unless there is not a specific firmware file for your carrier/region...
or there is a high rate of flashing failure with the firmware available.
if RSD lite fails, best to post errors from pc and phone here
before try again, if there's not an obvious fix
then try mfastboot.exe
fastboot.exe is generic android, mfastboot.exe is Motorola specific, for moto's unique system.img...
avoid usb 3.0 ports
make sure the firmware downloaded is correct size, verified MD5 is best.
verify drivers are correct when the device is in fastboot mode
I have generic moto instructions in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
i think the tip you gave to avoid usb 3.0 ports will really help, didnt realize i was using the usb 3.0 port
Ok, this is what I did so far: (I'm running Windows 7 64b).
1. RSD Lite 6.2.4: Installed
2. Motorola Mobile Drivers Installation 6.4.0: Installed
3. Motorola Device Manager: Installed
1. I started the mobile into the recovery mode
2. Connected the moto cable to the pc
3. Opened RSD Lite, loaded the new firmware and hit start boton
4. The process reached a "please reboot manually...."
5. The phone starts but with the old firmware in it.
More Updates: I ran mfastboot sequence and every command returned OKAY. The issue still remains intact, sound works for 5 seconds, and the firmware has not been updated.
Any thoughts?
murrayhawk said:
More Updates: I ran mfastboot sequence and every command returned OKAY. The issue still remains intact, sound works for 5 seconds, and the firmware has not been updated.
Any thoughts?
Click to expand...
Click to collapse
I want to see a full and complete log of the fastboot flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
lost101 said:
I want to see a full and complete log of the fastboot flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Click to expand...
Click to collapse
Ok, please check the attachment.
It looks increasingly like your issue is hardware, not software related. The only remaining software option I can suggest is via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22
lost101 said:
It looks increasingly like your issue is hardware, not software related. The only remaining software option I can suggest is via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22
Click to expand...
Click to collapse
Can you explain why does it retain the original firmware after mfastboot commandas ran well?
Just a quick reminder. This moto g XT1702 Jan2016, is not rooted, bootloader is locked and has everything stock, it came with Android 6.0 installed.
murrayhawk said:
Can you explain why does it retain the original firmware after mfastboot command as ran well?
Click to expand...
Click to collapse
How do you mean original Firmware? You are flashing a Stock Android 6.0 firmware image.
lost101 said:
How do you mean original Firmware? You are flashing a Stock Android 6.0 firmware image.
Click to expand...
Click to collapse
What I have right now is : System Version: 24.41.34.thea_retes.retesall.en.EU retes and after flashing to XT1072_THEA_RETES_6.0_MPB24.65-34_cid7_subsidy-DEFAULT_CFC.xml. I'm still having 24.41.34.thea_retes.retesall.en.EU retes.
hello all right with you, I hope so, I am Brazilian, and I would take a doubt on the bike variant g2 xt1078 of my region (Brazil).
Accidentally I Flashed the ROM xt1068 on my mobile xt1078, and now the first command "mfastboot.exe flash partition gpt.bin" shows the error "GPT Version Downgrade". And then camndo "mfastboot.exe flash system system.img_sparsechunk.0" It also shows the error "Image is too large" with this system partition has been reduced or changed, I wonder if this has repair, and that any suggestion and welcome.
@lost101
@Kamin4ri
@VitaTaf
@parrotgeek1
l.rochas
Is your Bootloader unlocked?
lost101 said:
Is your Bootloader unlocked?
Click to expand...
Click to collapse
yes unlocked.
What is the exact name of the XT1078 firmware image your are currently trying to flash?
lost101 said:
What is the exact name of the XT1078 firmware image your are currently trying to flash?
Click to expand...
Click to collapse
this and the image of factory with august patch
XT1078_THEA_RETBR_DS_6.0_MPBS24.65-34-5_cid12_subsidy-DEFAULT_CFC.xml
mfastboot flash partition gpt.bin
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
And the rest of the commands operates normally
@l.rochas - Do commands in this order:
mfastboot flash motoboot motoboot.img
mfastboot flash partition gpt.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Use this version of mFastboot: https://www.androidfilehost.com/?fid=24052804347778493
lost101 said:
@l.rochas - Do commands in this order:
mfastboot flash motoboot motoboot.img
mfastboot flash partition gpt.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Use this version of mFastboot: https://www.androidfilehost.com/?fid=24052804347778493
Click to expand...
Click to collapse
@lost101
does not work, same mistakes previously said
lost101 said:
@l.rochas - Do commands in this order:
mfastboot flash motoboot motoboot.img
mfastboot flash partition gpt.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Use this version of mFastboot: https://www.androidfilehost.com/?fid=24052804347778493
Click to expand...
Click to collapse
@lost101
does not work, same mistakes previously said
l.rochas said:
@lost101
does not work, same mistakes previously said
Click to expand...
Click to collapse
The issue appears to be that you have flashed the XT1068 Bootloader and this cannot be simply undone by flashing the motoboot.img via mfastboot.
This thread describes the process for unbricking an XT1068, but may also be applicable for your handset. You will need another user with an XT1078 to provide you with the partition backups:
http://forum.xda-developers.com/moto-g-lte/help/moto-g-xt1068-aka-moto-g-2nd-generation-t3435052
There is a risk that this won't work and your phone will never turn on again.
If you prefer, you could just flash a custom Stock MM ROM (if available) or CM/AOSP ROM via TWRP.
lost101 said:
The issue appears to be that you have flashed the XT1068 Bootloader and this cannot be simply undone by flashing the motoboot.img via mfastboot.
This thread describes the process for unbricking an XT1068, but may also be applicable for your handset. You will need another user with an XT1078 to provide you with the partition backups:
http://forum.xda-developers.com/moto-g-lte/help/moto-g-xt1068-aka-moto-g-2nd-generation-t3435052
There is a risk that this won't work and your phone will never turn on again.
If you prefer, you could just flash a custom Stock MM ROM (if available) or CM/AOSP ROM via TWRP.
Click to expand...
Click to collapse
It seems to be a very risky method, but not hurt to try.
l.rochas said:
It seems to be a very risky method, but not hurt to try.
Click to expand...
Click to collapse
You already almost completely destroyed your handset by flashing the wrong bootloader. You don't exactly have many options here.
lost101 said:
The issue appears to be that you have flashed the XT1068 Bootloader and this cannot be simply undone by flashing the motoboot.img via mfastboot.
This thread describes the process for unbricking an XT1068, but may also be applicable for your handset. You will need another user with an XT1078 to provide you with the partition backups:
http://forum.xda-developers.com/moto-g-lte/help/moto-g-xt1068-aka-moto-g-2nd-generation-t3435052
There is a risk that this won't work and your phone will never turn on again.
If you prefer, you could just flash a custom Stock MM ROM (if available) or CM/AOSP ROM via TWRP.
Click to expand...
Click to collapse
I've tried this method.
After a backup of all partitions on another default XT1078, the restore process on my phone finished with error only on /system or /data (I don't remember well).
Then I've tried to boot, but it had boot loop, just blinking very fast the Warning screen of unlocked bootloader.
It didn't work. :/
The only working method was merging XT1068 and XT1078 ROMs. Now Wifi and Mobile Data are working.
Now I can't change this ROM. Lineage or the whole XT1078 stock can't be installed.
The problem was that I didn't realize I was applying a XT1068 ROM on a XT1078 phone.
As all partitions were changed by flashing gpt.bin, the correct gpt.bin of XT1078 can't be applied.
Any solution????
I am afraid that there is no solution right now. You already permanently ****ed up your machine by flashing a wrong motoboot.img and GPT, that is, by not using a correct ROM file. You were careless, because mfastboot is a DANGEROUS tool that requires CARE and a wrong use of this tool can turn your Moto device into a fancy black paperweight. It has no security measures that prevent you from flashing a stock ROM for a wrong device, which is what you did by not making sure that you were using a correct (or at least compatible) firmware.
I am afraid that your device is now crippled for life unless you somehow can force the correct motoboot and GPT in your phone (impossible AFAIK) or you get a new Thea motherboard and replace the current one. You are very lucky that you can still boot it, because most people in your situation are left with a permanent hard brick. Can you get into fastboot and is your bad bootloader unlocked? If so, you can try installing TWRP and LineageOS for Titan (then the worst you risk is a soft brick) or leave the "stock" franken-ROM that "works".
IMO you should get a spare XT1078 motherboard, unlock it's bootloader (AND NEVER TOUCH IT AGAIN UNLESS OTHERWISE SPECIFIED), flash TWRP and IMMEDIATELY flash LineageOS+GApps so you never have to deal with stock ROMs and the dangers they carry when handled carelessly. With custom AOSP based ROMs and recoveries the worst thing you risk is a soft brick, which you can fix by reflashing a proper custom ROM in TWRP and/or wiping partitions. No recovery? You still have a working fastboot to flash another TWRP. Messing with /system is MUCH SAFER than messing with your bootloader.
I hope you have learned a lesson about the real risk of flashing smartphone firmwares without doing enough research first. It's no game, a wrong step and no more phone for you.
benjausen said:
I am afraid that there is no solution right now. You already permanently ****ed up your machine by flashing a wrong motoboot.img and GPT, that is, by not using a correct ROM file. You were careless, because mfastboot is a DANGEROUS tool that requires CARE and a wrong use of this tool can turn your Moto device into a fancy black paperweight. It has no security measures that prevent you from flashing a stock ROM for a wrong device, which is what you did by not making sure that you were using a correct (or at least compatible) firmware.
I am afraid that your device is now crippled for life unless you somehow can force the correct motoboot and GPT in your phone (impossible AFAIK) or you get a new Thea motherboard and replace the current one. You are very lucky that you can still boot it, because most people in your situation are left with a permanent hard brick. Can you get into fastboot and is your bad bootloader unlocked? If so, you can try installing TWRP and LineageOS for Titan (then the worst you risk is a soft brick) or leave the "stock" franken-ROM that "works".
IMO you should get a spare XT1078 motherboard, unlock it's bootloader (AND NEVER TOUCH IT AGAIN UNLESS OTHERWISE SPECIFIED), flash TWRP and IMMEDIATELY flash LineageOS+GApps so you never have to deal with stock ROMs and the dangers they carry when handled carelessly. With custom AOSP based ROMs and recoveries the worst thing you risk is a soft brick, which you can fix by reflashing a proper custom ROM in TWRP and/or wiping partitions. No recovery? You still have a working fastboot to flash another TWRP. Messing with /system is MUCH SAFER than messing with your bootloader.
I hope you have learned a lesson about the real risk of flashing smartphone firmwares without doing enough research first. It's no game, a wrong step and no more phone for you.
Click to expand...
Click to collapse
Nice answer, benjausen.
I've done a lot of things on more than 10 different mobile phone models, but for the first time I think there is no complete solution.
My only solution was using a mix of XT1068 and XT1078 Stock ROMs, flashing one component per time. The only bug is on screen rotation that is rotating to the wrong side. The rest is fine.
I'd like to install LineageOS, but flashing isn't being possible. It is giving error.
Only the way I mentioned was successful. Is there any manual way to flash components separated instead of using a .zip file?
peacehope said:
Nice answer, benjausen.
I've done a lot of things on more than 10 different mobile phone models, but for the first time I think there is no complete solution.
My only solution was using a mix of XT1068 and XT1078 Stock ROMs, flashing one component per time. The only bug is on screen rotation that is rotating to the wrong side. The rest is fine.
I'd like to install LineageOS, but flashing isn't being possible. It is giving error.
Only the way I mentioned was successful. Is there any manual way to flash components separated instead of using a .zip file?
Click to expand...
Click to collapse
I don't have a lot of advice for you, as a previous post states your options are pretty much limited. Try flashing individual .img files from a LineageOS ROM. Try downloading one for Titan and patching the images inside it.
benjausen said:
I don't have a lot of advice for you, as a previous post states your options are pretty much limited. Try flashing individual .img files from a LineageOS ROM. Try downloading one for Titan and patching the images inside it.
Click to expand...
Click to collapse
I don't have now a LineageOS ROM to check, but if I'm not wrong, it doesn't have each separated file as Stock ROM. Am I wrong?
I've flashed many Stock ROMs manually file by file, but never with custom ROMs.
Can you please provide any link teaching this with custom ROMs? I really want to try this.
Maybe this can be a solution, and if it works we will help many people here.
Hello,
I have unlocked Motorola X (2nd Gen) XT-1097.
System version : 23.201.3.victara_att.att.en.US.att
What is the best way to update my device to Android Marshmallow without broke the carrier unlock?
Thank You
Since you are carrier unlocked, you should choose one of the unlocked firmwares, example RETLA (Retail Latin America).
You should be safe if you follow instructions from
http://forum.xda-developers.com/moto-x-2014/general/retail-marshmallow-xt1097-mpe24-49-18-t3275894
&
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Proceed at your own risk. Good luck
Hi renzs,
What is the different between these firmware?
@chasanb OK. I had a chance to re-read the attached posts and I find that somethings missing. So below is my steps that I do to flash stock marshmallow firmware on my phone.
Before anything, download motorola drivers & install, download latest twrp, and download mfastboot plus stock marshmallow firmware & unzip to d:/mfastboot or wherever.
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!IkEVHRxS
1. unlock bootloader
2. install latest twrp recovery
3. reboot recovery
4. wipe all
5. reboot bootloader
6. run 1 by 1 below steps
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot reboot
Click to expand...
Click to collapse
7. Done :good:
chasanb said:
Hi renzs,
What is the different between these firmware?
Click to expand...
Click to collapse
Model number XT1092/XT1097/XT1095 and Country/Carrier/Version (RETBR is Retail Brazil, RETLA is Retail Latin America, RETGB is Retail Great Britain, ATT is AT&T, TMO is T-Mobile, 6.0 is marshmallow, 5.1 is Lollipop, etc.)
Again, please proceed at your own risk. You "sound" like you don't know what you're getting yourself into. Apologies if I'm wrong.
Actualy I am zero about this renzs, :laugh:
In your opinion, How many percentage for your guide to work without broke the carrier unlock?
And, If this step fails, do you know step to unlock the carrier?
Hi,
Maybe, there was no Marshmallow firmware for my smartphone (AT&T XT-1097). At file that I downloaded the file name just contain version 5.1. VICTARA_ATT_XT1097_5.1_LPE23.32-21.9_cid1_CFC.xml.
I am afraid that firmware not update my smartphone to Marshmallow.
And I more afraid If try another firmware (non ATT firmware).
what is your opinion?
Thank you.