Code:
/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
banner credits goes to : @misfitpierce
Kernel Features:kernel.org Version : 3.10.101 (latest stable version)
Built with custom(self compiled) GCC 5.2.1 linaro toolchain
Alucard Hotplug
Nethunter Support (use nethunter kernels)
USB Ethernet Support
USB Adapter Drivers
Xbox One Support
Overcolcking-Underclocking (thanks to @TheSSJ)
CPU Optimizations
Interactive Governor from fugu
Intel powerclamp driver
Async FSync from HTC
BLX implemented (thanks to @TheSSJ)
BLK-throttle improvements
ZRAM support
LZ4 Compression
exfat support
ntfs r/w support
Set minimum brightness to 2 instead of 15 percent (thanks to @TheSSJ )
sweep2sleep (on by default )
UKSM
True Dynamic Fsync [faux123]
KSM optimized
PowerSuspend [Yank555.lu]
CPU Governors:
- Intel
- Alucard
- Lagfree
- ConverativeX
- BioShock
- LionHeart
- YankActive
- Adaptive
- Wheatley
- Darkness
- Hotplug
IO schedulers:
- row
- sio
- zen
- vr
- fifo
- fiops
- tripndroid
TCP congestion algorithms :
-westwood (default, much faster speed)
-cubic
-reno
-bic
-highspeed
-htcp
-vegas
-veno
-Illinois
EXTRA Features :
added init.d support
Implemented quickwake for better response
Power efficient Work queues for better battery
Tweaked Memory management
Downloads
builds :
Download
Nethunter Kernels:
Download
FLASH THE ZIP VIA TWRP
kernel source :
https://github.com/Zenfone2-Dev/kernel-FlareM
if you want me to add any new feature leave a post
Credits:
@TheSSJ for his work on the stock kernel
@deadman96385 for his work on the CM 12.1 kernel
@crpalmer, @jrior001 for bringing up the zf2 and its kernel
@osm0sis for his work on anykernel.zip
_____________________________________________________________________________________________________________
XDA:DevDB Information
[kERNEL]FlareM[Linaro][CM-13.0]ZE551ML/ZE550ML, Kernel for the Asus ZenFone 2
Contributors
say99, [URL="http://forum.xda-developers.com/member.php?u=3520901]eoghan2t7[/URL]
Kernel Special Features: more governors, I/O shedulers, better memory managment, Async Fsync and more..
Version Information
Status: Stable
Current Version: FlareM_v16
Created 2015-12-12
Last Updated 2016-04-20
Reserved
roadmap :
add support for sweep2wake # working on that
see for possible solutions for tweaking sound
implement kernel-based thermal control
fix interactiveX and smartmax, smartmax seems to reboot the phone after third suspend and 10 secs
and more
for now :
use Interactive governor and deadline as I/O scheduler
limit max frequency to 1333Mhz for more battery and nice performance
Changelog:
v16 04/20/2016
GPU tweaks
CM updates
selinux set to enforcing by default (XOSP uses permissive )
Binder tweaks
enabled experimental configs
added tweaked simple ondemand GPU governor
mainline F2FS with encryption
compiled with GCC linaro 5.3.1
fixed all MM issues
optimized KSM
added deferred timer sysfs entry to control it.
and more underhead tweaks
improved stability.
v15 03/19/2016
kernel.org version 3.10.101
fixed selinux
smartassH3 governor
RTL8152/8150 support
Xbox one controller Support
fixed stability
Fixed reboots
QF9700 chip support
F2FS from mainline
Optimized Binder
more Atom optimization Flags
and much more
v14 02/22/2016
Build with my own linaro-gcc 5.2.1 toolchain
fixed all linux related issues
proper 3.10.96 linux
added back UKSM
Added alucard hotplug
atom optimizations
alucard min cpu online=2
v14OC build with OC
v14KVM build with KVM (No OC)
v14 without KVM and OC
More LZ4 work and compression and decompression
more power efficient work queues
added PowerSuspend
Tweaked L1 and L2 cache
fixed cpuset for hotplugging
Link Time Optimizations
Zen-tune for snappiness
Added Intel Cpu governor
Support for displaylink drivers (as module)
and more under-head tweaks
v13 02/04/2016
updated to latest kernel.org version : 3.10.96
v13k with KVM support
faster kernel decompression
added hotplug governor for real time hotplugging
Build with GCC 5.3.0
lockless wakeups for sched and futex
Hot plugging for the ram
Forced hot plugging on cpu0 no matter the governor
CPU workload consolidation
more underhead tweaks
better stability
v12 01/24/2016
updated to latest kernel.org version : 3.10.95
Introduced Intel power-clamp driver
Fixed MTP related issues
Cleaned a lot things
More USB ETHER drivers
Frankenstein Governor (based on interactive with hot plugging) # use with caution
Improved more on Stability
and more tweaks
v11 01/14/2016
improved stability
improved memory management(KSM)
Optimized KSM
Introduced power suspend
added darkness governor
updated to latest CM sources
USB HID keyboard/Mouse support
Kali Nethunter Support (working on bringing it up)
updated with latest ASUS source codes (MR912-v2.20.40)
Under hook tweaks
Reduced Latency
Decreased time to enter sleep
True Dynamic Fsync
Cleaned lot things
Applied grays patch to improve a bit of speed
fixed up upgrading
updated codecs and many other drivers
v10 01/06/2016
updated kernel.org version (3.10.94)
improved stability
improved battery backup (as per I have noticed)
UKSM
nothing more
more underhead tweaks
v9 01/01/2016
fixed ROW IO scheduler
fixed TripNDroid IO scheduler
fixed permission for workqueue
used O3 optimizations
improved wakelock.c (wakes up faster now)
ZRAM tweaks
many more underhead tweaks
v8 12/28/15
implemented sweep2sleep
unlocked gpu
fixed simpleondemand GPU governor for better scaling
tweaked readahead (a bit faster now)
fixed ext4 use Frandom
init.d is automatically created if it's not there
more tweaks . . . .
v7b 12/25/15 (Santa's gift )
decreased minimum brightness
a bit busy today cant do any more
v7 12/24/15
added tripndroid I/O scheduler
implemented blx
readahead tweaks
exfat support (module)
ntfs read write support (module)
v6b 12/21/15
fixed multi-core issue
used anykernel zip to make flashable zips (thanks to @eoghan2t7)
fixed issue of kernel not booting on recent cm builds (I am on todays build)
common zips for Z00A and Z008 from now
v6 12/20/15
added quickwake back
implemented google's snappy compression
implemented frandom to generate random no. much faster
enabled zram
synced with latest cm codes
tweaked interactive a bit
v5 12/18/15
added alucard governor and fixed it # phone seems better on alucard governor
added deadline as default for external card
updated to latest base code by CM (thanks to @jrior001 and @crpalmer)
v4b 12/14/15
enabled exfat support (had forgot to enable it in previous build)
added stock gpu drivers
no gpu unlocking for now
v4 12/13/15
added exfat support
added TCP congestion algorithms
westwood set as default
BLK-throttle improvements
renamed z008 version correctly
v3 12/12/15
added init.d support
implemented Async Fsync
improved work queue for better battery life
unlocked GPU for better scaling (thanks to @TheSSJ)
Improved memory management
v2 12/12/15
added UC(thanks to @TheSSJ)
v1 12/12/15
added several I/O shedulers and Governors
screenshots :
A good start buddy!
With some optimizations, it would be a great kernel. :good:
krasCGQ said:
A good start buddy!
With some optimizations, it would be a great kernel. :good:
Click to expand...
Click to collapse
thanks bro
next version will hopefully have UC
Good luck with this kernel, I'm very happy to see some guys like you support the ZF2 ! @say99 :good:
UC implemented flareM V2
Any chance for CM 12 version ?
Sent from my ASUS_Z00A using Tapatalk
tuilalnvinh said:
Any chance for CM 12 version ?
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
well yes but only for Z00A aka ZE551ML
but will need a tester cause I will testing cm 13 kernels for now
nothing for Z00D??
cieffe54 said:
nothing for Z00D??
Click to expand...
Click to collapse
will need a tester
pm if someone wants to be
say99 said:
well yes but only for Z00A aka ZE551ML
but will need a tester cause I will testing cm 13 kernels for now
Click to expand...
Click to collapse
Ok, i can be a tester, i'm using ze551ml 2GB Ram
Sent from my ASUS_Z00A using Tapatalk
tuilalnvinh said:
Ok, i can be a tester, i'm using ze551ml 2GB Ram
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
will pm you the link as soon as I finish adding features and compilation
Wil it work on Z008 build running cm13??
kjinx01 said:
Wil it work on Z008 build running cm13??
Click to expand...
Click to collapse
uploaded a test build #v2_z00D
k I will flash z00D build in my z008 and will report u.. And in case if it don't work wt do I need to do??
kjinx01 said:
k I will flash z00D build in my z008 and will report u.. And in case if it don't work wt do I need to do??
Click to expand...
Click to collapse
bro in the drive you will see a file named as flareMv2z00D.zip
flash that one its for z00D
Kk... I was asking for z008 build?? U compiled kernel for z008 running on cm13 pp
kjinx01 said:
Kk... I was asking for z008 build?? U compiled kernel for z008 running on cm13 pp
Click to expand...
Click to collapse
yes bro
test kernel z00A cm 12 up
testers can flash
Related
ATTACKED-KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING THIS KERNEL WORKS IN STOCK LOLLIPOP 5.0.2 ONLY
Hi all, im not a DEV, so please go easy on me, im still learning...
This kernel works in STOCK LOLLIPOP 5.0.2 Roms... DOESNT WORK CM / AOSP BASED ROMs !!
The main goal is to have a stable and optimized Kernel, with usefull features ...
The features Are :
Compiled Using Linaro 4.9.3 Cortex A7 Optimized
Reclaimed RAM from loggers
Added Power Suspend 1.5
CPU Underclocking
Enabled Power Eficcient Worqueues
Added SmartMax Governor
Added Yankactive Governor
Added Alucard Governor
Added Intellimm Governor
Added Impulse Governor
Added Zzmoove Governor
Added TripNdroid I/O Schreduler
Added SIO I/O Schreduler
Added ZEN I/O Schreduler
Added fiops I/O Schreduler
Some Kernel Optimizations
GPU Overclock (533Mhz) (thanks to pinkflozd)
GPU Underclock (100Mhz) (thanks to pinkflozd)
Added Conservative GPU Governor
Permissive SElinux
Added LCD_KCAL
Added -02 optimization flags
Enabled Kernel NEON Mode
Init.d Support
Added Optimized ARM RWSEM algorithm
Added USB Fast Charge V2
Added KEXEC HARDBOOT PATCH
Added MSM HotPlug
Added Bricked HotPlug
Added Intelli HotPlug
Added Alucard Hotplug
Enabled On/Off Support for ARCH_POWER & GENTLE FAIR SLEEPERS
Added PegasusQ Governor
Added Fauxs Sound
Added High Performance Headphone Mode
Added Fsync On/Off Support
Updated CPU Boost Driver
Lots Of Tweaks and Optimizations
Update linux kernel 3.4.42 >> 3.4.107
Added DT2W & S2W VERSION
This kernel has now inbuilt SYNAPSE suport :highfive: , Big thanks and credits to @apb_axel for UKM
To tweak you will have to download Synapse from PlayStore created by Andrei Lux it includes all kernel features...
DOWNLOAD
ATTACKED-KERNEL V8
ATTACKED-KERNEL V8 (DT2W & S2W VERSION)
OLD DOWNLOADS
STOCK KERNEL FOLDER
XDA:DevDB Information
ATTACKED KERNEL - STOCK, Kernel for the Moto G
Contributors
attack11, attack11, faux123, savoca, varun chitre , pinkflozd ,franciscofranco ,shivamk11, ion-storm, alin23, anarkia1976, neobuddy89 ,blechd0se ,myfluxy, F4k, hurtsky
Source Code: https://github.com/attack11/kernel-msm-lollipop
Kernel Special Features: Simple & Stable Kernel
Version Information
Status: Stable
Current Stable Version: V8
Stable Release Date: 2015-05-26
Created 2015-04-06
Last Updated 2015-06-08
Reserved
Changelog:
06-04-15
First Release
07-04-15
Second Release
Added Init.d Support
Added Optimized ARM RWSEM algorithm
Fixed Governors
Other changes check Git
09-04-15
Third Release
Added Alucard Governor
Added Fast Charge V2
Added KEXEC HARDBOOT PATCH (test please)
Fixed version not showing in settings
Tweaked SmartMax more battery friendly
Fixed weird frequencies
Disabled 96MHz overclock frequency (seems to work better at minimum 192 MHz)
Updated MSM HotPlug, It works a lot better now
Enabled ARCH_POWER and disabled GENTLE FAIR SLEEPERS
14-04-15
Fourth Release
Added Inbuilt SYNAPSE support (read OP)
Enabled On/Off Support for ARCH_POWER & GENTLE FAIR SLEEPERS
Added PegasusQ Governor
Added Fauxs Sound
Added Fsync On/Off Support
Lots Of Tweaks and Optimizations
Disabled CPU boost & SmartMax Governor for now (was causing issues)
22-04
Fiveth Release
Improved Synapse a little more for our device
Fixed some bugs
Added back SmartMax Governor
Added Alucard Governor
Added Intellimm Governor
Added Impulse Governor
Added Zzmoove Governor
Added back CPU Boost On/Off Support
02-05
Sixth Release
Update linux kernel 3.4.42 >> 3.4.107
Added DT2W
Added S2W
Added Alucard Hotplug
Disabled MPdecision & Touch Boost
Updated Installer script to install busybox & others...
04-05
Seventh Release
Reverted DT2W
Reverted S2W
Reverted Disabled MPdecision & Touch Boost
Updated Installer script & others...
26-05
Built From the scratch
Updates from Motorola & CM sources
New Updated Installer Script
Updated msm_hotplug
Added intelli_hotplug
Added Bricked_hotplug
Updated Cpu Boost Driver
Updated Interactive & Ondemand CPU Governor
Updated simple_ondemand GPU Governor
Added High Performance Headphone Mode
Update UKM with more stuff
Update S2W & DT2W VERSION
Some other stuff... Check git !
The Governors are working fine now !
Love u
Really waiting for it
Beauty!! I'm waiting long time for stock kernel
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Awesome! I have been waiting for so long, does it have fauxsound support?
Cjit26 said:
Awesome! I have been waiting for so long, does it have fauxsound support?
Click to expand...
Click to collapse
No, read op, not in that list
init.d support? WIP or already included?
iDynamics said:
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Click to expand...
Click to collapse
Is your /data partition ext4 or f2fs?
iDynamics said:
Thanks!
Flashed it on 5.1 GPE and it seems to be working well so far. Will report if I encounter any issues.
Click to expand...
Click to collapse
Great! so it works on GPE 5.1 too, Thanks!
Cjit26 said:
Awesome! I have been waiting for so long, does it have fauxsound support?
Click to expand...
Click to collapse
No, im not planning to add that feature yet, maybe its better to wait faux new kernel
celikbasm said:
init.d support? WIP or already included?
Click to expand...
Click to collapse
I am working on it, hopefully today i release a new version with fixed governors and init.d support
Oh okay, it works great so far man,good job :good:
attack11 said:
ATTACKED-KERNEL
Click to expand...
Click to collapse
This guy is making lot of good contribution to the Moto G XDA community in the recent past.
I think we can repay him with a little gesture of appreciation.
I thought of making him a new sig.. Hope you like it attack11.. If no, let me know what changes you need.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for your kernels.
Cheers!!
The /data partition is ext4.
hmnk said:
This guy is making lot of good contribution to the Moto G XDA community in the recent past.
I think we can repay him with a little gesture of appreciation.
I thought of making him a new sig.. Hope you like it attack11.. If no, let me know what changes you need.
Thanks for your kernels.
Cheers!!
Click to expand...
Click to collapse
Wow, Thanks a lot! Its Perfect!
V2 its Out !
Changes:
Added Init.d Support
Added Optimized ARM RWSEM algorithm
Fixed Governors
Other changes check Git
There are some weird issues with some frequencies, please test, Cheers!
I cant able to download this kernel from AFH . I have no idea why this happens
I'll flash this on stock 5.0.2 later today and report in case i run into any issues. I wish that this version for stock roms becomes as good as the version for aosp / cm
Well for me on 5.1 GPE the camera gets broken and now when getting back to stock kernel the Wi-fi won't turn on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
KernelUltra for Moto E
Hello guys, I present the KernelUltra for condor
Features
-Compiled with SaberMod 4.9 GCC
-CRC check disabled
-Swappiness reducided of 60 to 40
-SLUB optimized
-Enabled aggressive multi-core power savings
-Enabled pipe flag
-ext4: more speed
-Reclaim RAM from loggers
-Added 2 gonernators: Smartmax and Wheatley
-Added governators Alucard and Lionheart
-Update adreno.c
-Added some tweaks great
-Added graphite flags
-Added optimized ARM RWSEM algorithm
-Added ondemandplus governor
-Added DT2W (DoubleTap2Wake)
-Optimized sfck compression
-Network speed tweak added
-Disabled gentle fair sleepers
-Lowered latency of vm for reduced lags
-Noatime and Noridatime by default in namespace
-WiFi driver updated
-Added simple GPU algorithm
-Added support fsync dinamic
-Added intelliplug
-Tweaks for best perfomance in cfp iosched
-Frandom support
-Kernel Version Linux update to 3.4.108 with the last patchs
-Powersuspend added
-MPdesicion disabled
-Added intelliactive governor
-Added intellidemand governor
-Added news Shedulers:
ZEN
SIO
FIFO
VR
-Sound Control 3 support (thanks faux123)
-Enable headset in high performance in the auriculars (best sound!)
-build only with adreno a3xx, a2xx suprimed
-deadline sheduler tweaked for best perfomance
-Support for ROMs based in AOSP
-Added KCAL support
-Added support exFat
-Compilation builded with neon mode and VFP
-VM min/max increment
-Optimize square root algorithm
-Optimized AES & SHA1 routines
-Use XZ and LZ4 compression
-Stereo call recording support
-Support asycn in fsync
-Optimize cpufreq
-Remove DT2W (only R8)
-Support async added
-Support exfat added
-lib/memcopy: use glibc version (most perfomance)
-lib/string: use glibc version (perfomance for mem copy)
-optimize memory allocation in check_partition()
-clean up some dead code
-Initial port of Fast Charge USB
-set default mtu to 64K in TCP
-Allow 0ms deadline latency, increase the read speed in deadline
-Revert commit of VM for problems with lag
-Enable ARCH_POWER
Changelogs
Code:
Release 1:
-Compiled with Linaro 4.9
-CRC check disabled
-Swappiness reduced of 60 to 40
-SLUB optimized
-Enabled aggressive multi-core power savings
-Enabled pipe flag
-ext4: more speed
Release 2:
-Reclaim RAM from loggers
-Added 2 gonernators: Smartmax and Wheatley
Release 3:
-Added governators Alucard and Lionheart
-Update adreno.c
-Added some tweaks great
-Added graphite flags
-Added optimized ARM RWSEM algorithm
Release 4:
-Added ondemandplus governor
-Added DT2W (DoubleTap2Wake)
-Optimized sfck compression
-Network speed tweak added
-Disabled gentle fair sleepers
-Lowered latency of vm for reduced lags
-improve fairness efficiency in fair
-Noatime and Noridatime by default in namespace
-WiFi driver updated
Release 5:
-Added simple GPU algorithm
-Added support fsync dinamic
-Added intelliplug
-Tweaks for best perfomance in cfp iosched
-Frandom support
-Kernel Version Linux update to 3.4.108 with the last patchs
-Powersuspend added
-MPdesicion disabled
Release 5.1:
-Reverted: improve fairness efficiency in fair
-Lags fixed
-Kernel ClenUp
Release 6:
-Added intelliactive governor
-Added intellidemand governor
-Added news Shedulers:
ZEN
SIO
FIFO
VR
-Sound Control 3 support (thanks faux123)
-Enable headset in high performance in the auriculars (best sound!)
-build only with adreno a3xx, a2xx suprimed[/SIZE]
-deadline sheduler tweaked for best perfomance
-[COLOR="black"]Compiled with Saber Mod GCC 4.9[/COLOR]
-Added suport for ROMs AOSP
Release 7:
-Added KCAL support
-Added support exFat
-Compilation builded with neon mode and VFP
-VM min/max increment
-Optimize square root algorithm
-Optimized AES & SHA1 routines
-Use XZ and LZ4 compression
-Stereo call recording support
-Support asycn in fsync
-Optimize cpufreq
Release 8:
-Remove DT2W (only R8)
-Support async added
-Support exfat added
-lib/memcopy: use glibc version (most perfomance)
-lib/string: use glibc version (perfomance for mem copy)
-optimize memory allocation in check_partition()
-clean up some dead code
-Initial port of Fast Charge USB
-set default mtu to 64K in TCP
-Allow 0ms deadline latency, increase the read speed in deadline
-Revert commit of VM for problems with lag
-Enable ARCH_POWER
Downloads
Release 1
Release 2
Release 3
Release 4
Release 5
Release 5.1
Release 6
Release 7
Release 8
Credits
-CyanogenMod by the source
[email protected] by the great help
[email protected] for helped to fix the bug with the WiFi
[email protected] for the commits
[email protected]
[email protected] by the banner
[email protected]
How to install
-Reboot to recovery
-Flash the zip (without wipes)
-Reboot your phone and enjoy the UltraKernel
XDA:DevDB Information
KernelUltra, Kernel for the Moto E
Contributors
TechnoAnder, srfarias
Source Code: https://github.com/Ander-Alvarez/UltraKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R8
Stable Release Date: 2015-09-11
Created 2015-08-16
Last Updated 2015-09-11
Good job
Does this kernel support loop features??
Sent from my Moto E using XDA Free mobile app
Work on AOSP ?
funnyboy1234 said:
Does this kernel support loop features??
Sent from my Moto E using XDA Free mobile app
Click to expand...
Click to collapse
No, these features not be in the Kernel.
Gilmar Mess said:
Work on AOSP ?
Click to expand...
Click to collapse
This Kernel is for ROMs based un CM-12.1.
New update with some features excellents.
Code:
Changelog Edition 1.0
-Compiled with Linaro 4.9
-CRC check disabled
-Swappiness reducided of 60 to 40
-SLUB optimized
-Enabled aggressive multi-core power savings
-Enabled pipe flag
-ext4: more speed
Changelog Edition 1.1
-Reclaim RAM from Loggers
-Added new governators
*Wheatley
*Smartmax
Changelog Edition 1.2
-Added alucard governator
-Added lionheart governator
-Added many tweaks great
-Added optimized ARM RWSEM algorithm
-Added graphite flags
-Update adreno.c
Changelog Edition 1.3
-Added ondemandplus governor
-Added DT2W (DoubleTap2Wake)
-Optimized sfck compression
-Network speed tweak added
-Disabled gentle fair sleepers
-Lowered latency of vm for reduced lags
-improve fairness efficiency in fair
-Noatime and Noridatime by default in namespace
-WiFi driver updated
I have flashed this kernel and my playstore stopped working, any suggestion ? I have already wiped the cache in recovery but still not much preogress.
Thanks
...
dileep.betha said:
I have flashed this kernel and my playstore stopped working, any suggestion ? I have already wiped the cache in recovery but still not much preogress.
Thanks
Click to expand...
Click to collapse
The problem is probably that be of the ROM that installed, reinstall the Kernel and share you experience of new.
Sent from my Moto E using XDA Free mobile app
¡Friends!, New update of this Kernel very good, fast and very optimized.
I will try. I hope always bring news.
testing the new update
brundark said:
testing the new update
Click to expand...
Click to collapse
Very Good, I hope you like.
Sent from my Moto E using XDA Free mobile app
So far it is the best I've ever used kernel. Optimizations for ext4 leave everything faster especially when installing apps.
Good work,but i love the dtw feature and thats missing here,so i stick to fenom beta,keep it up.Thanx
STAY ADDICTED!!!
-CALIBAN666- said:
Good work,but i love the dtw feature and thats missing here,so i stick to fenom beta,keep it up.Thanx
STAY ADDICTED!!!
Click to expand...
Click to collapse
Probably I will add the DT2W in the edition 1.2, because much people enjoy this feature.
Sent from my Moto E using XDA Free mobile app
Sounds good.
STAY ADDICTED!!!
Just waiting for DTW
Sent from my Moto E using XDA Free mobile app
I'm loving this kernel!!! now my link2sd auto link, is working very fast! Optimizations of ext4 very good,
(Sorry my bad english, i use translate)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void. Nah! Just kidding No warranty is void in YU. :)
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Reloaded Kernel was build keeping in mind the the stability and performance of your device.
A lots of battery Saving tweaks also applied to keep the battery consumption minimal.
Experience your zeus like never before.
Features
CPU Governors
ElementalX
Conservative
Darkness
Impulse
Intelliactive
Interactive
Ondemand
Performance
Powersave
Smartmax_eps
CPU Hotplug
ThunderPlug
Alucard
IO Schedulers
BFQ
FIOPS
NOOP
ROW
DEADLINE
CFQ
SIO
SIOPLUS
ZEN
Common
Kernel Upstream to 3.10.104
OverClocked Big Cluster upto 1.71GHz
OverClocked Little Cluster upto 1.21GHz
CPU Optimization
GPU Optimization
Kexec and F2FS Support
Added support for zRAM and zsmAlloc with LZ4 Compression
Reloaded Thermal System (Based on IntelliThermal v3.1)
KCal(Screen/Vibrance-Control) v2
PowerSuspend Drivers v1.7
Tweaks for better Performance and Battery life
Optimization on Interactive Governor
Support for Fast Charging (ThunderCharge 2.1)
Support for Adreno Idler
Support for Dynamic Sync
Support for Power Efficient Work Queues
WakeLock Toggles
Vibration Controller
Low-Memory Killer
Wake-Up Gestures
Interactive init.d script for better performance
Credits
CM Team
YU Televentures
Shoaib05 (for kernel upstream and many important commits)
Aayushrd7 (For Helping)
darshan1205 (For helping)
If you like my work, consider buying me a cup of coffee
XDA:DevDB Information
Reloaded Kernel, Kernel for the YU Yureka
Contributors
riteshsaxena, CM Team, Yu Televentures, Sanyam Jain, Aayush Bucha, Shoaib Anwar, Darshan Manjrekar
Source Code: https://github.com/RiteshSaxena/Reloaded_tomato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: X6
Stable Release Date: 2017-05-08
Created 2017-02-15
Last Updated 2017-05-08
Notes
Use Kernel Adiutor-MOD to apply settings! Download Link for Kernel Adiutor-MOD--https://github.com/yoinx/kernel_adiutor/raw/master/download/app/app-release.apk
Changelogs and Downloads
X6
Changelogs and Download
X5
Changelogs and Download
X4
Changelogs and Download
X3
Changelogs and Download
X2
Changelogs and Download
Old Build available here:http://forums.yuplaygod.com/threads...ed-mn-n-f2fs-kexec-random-reboot-fixed.46152/
Recommended Settings
===============PERFORMANCE===============
CPU Tab
Big Cluster
Max-1700MHz
Min-800MHz
Governor-intelliactive
Little Cluster
Max-1200MHz
Min-800MHz
Governor-intelliactive
GPU
Max-550
Min-220
Governor-msm-adreno-tz
Adreno Idler-> OFF
============BALANCED (BAISED TOWARDS PERFORMANCE)============
CPU Tab
Big Cluster
Max-1700MHz
Min-200MHz
Governor-interactive with init.d tweaks
Little Cluster
Max-1200MHz
Min-200MHz
Governor-interactive with init.d tweaks
GPU
Max-550
Min-220
Governor-msm-adreno-tz
Adreno Idler- ON
============BALANCED (BAISED TOWARDS BATTERY)============
CPU Tab
Big Cluster
Max-1500MHz
Min-200MHz
Governor-smartmax_eps
Little Cluster
Max-1000MHz
Min-200MHz
Governor-impulse
GPU
Max-465
Min-220
Governor-Simple ondemand
=============EXTREME BATTERY===============
CPU Tab
Big Cluster
Max-600MHz
Min-200MHz
Governor-Smartmax_eps
Little Cluster
Max-800MHz
Min-200MHz
Governor-smartmax_eps
GPU
Max-400
Min-220
Governor-Simple ondemand
===============COMMON===============
CPU Hotplug
As Per your Preference
Thermal
Set Temp limit to 50
Wake Locks
Turn off all. Enable them if any problem arises.
Power and Battery
Enable Charge Rate
Charge Rate -> 1250
IO Scheduler
ZEN for Internal and BFQ for External
Wake Controls
As per your Preference.
Misc
Turn off android logging
Turn on Dynamic Fsync
Update: Reloaded X2Changelogs
*Merge Latest Lineage upstream
*Merge latest CAF Code i.e., Branch 1.11
*Fixed Random Reboot on low Wi-Fi
*Completely Removed Sound Mod
*Removed GPU OC
*Better interactive init.d script added.
*Removed the Optimize for size flag, so that means improved performance.
*Proper -O3 Optimizations for GPU, much better gaming
*More Optimizations for Fluid Performance
*Battery Tweaks
*Removed many useless tweaks
Downloads
[SIZE="4"]http://ouo.io/FEwnSS[/SIZE]
Will it work with resurrection remix v5.8.0?
ndasarathy said:
Will it work with resurrection remix v5.8.0?
Click to expand...
Click to collapse
Yes.
riteshsaxena said:
Yes.
Click to expand...
Click to collapse
Download link not working, could you please provide a mediafire or androidhost link?
KuntalBiswas said:
Download link not working, could you please provide a mediafire or androidhost link?
Click to expand...
Click to collapse
Click on skip ad and you will be redirected to android file host
Work in Cm 12.1???
Update: Reloaded X3
Changelogs
*latest lineage upstream
*more balanced interactive script
*minor bug fixes
*more optimization for smoothness.
*Added TripNDroid IOSCHED
*Faux Sound Mod v3.6 (Optional)
Downloads
Without Sound Mod: http://ouo.io/H0Gpt
Sound Mod: http://ouo.io/7Dyg1
Enjoy the Fluidity
Regards,
Ritesh
will it work in lineage 0s 14.1?
Jeet Joshi said:
will it work in lineage 0s 14.1?
Click to expand...
Click to collapse
Yep
Thnx
Will try X3 on RR5.8.2
riteshsaxena said:
Changelogs
*latest lineage upstream
*more balanced interactive script
*minor bug fixes
*more optimization for smoothness.
*Added TripNDroid IOSCHED
*Faux Sound Mod v3.6 (Optional)
Downloads
Without Sound Mod: http://ouo.io/H0Gpt
Sound Mod: http://ouo.io/7Dyg1
Enjoy the Fluidity
Regards,
Ritesh
Click to expand...
Click to collapse
Thx for the X3
What is the functionality of the Sound Mod. Does it require any additional changes?
Can u guide on this
Im gonna use it on Official RR5.8.2 (for your reference)
It can be used to alter sound volumes beyond the system available values.
mohammad.nomaan said:
Thx for the X3
What is the functionality of the Sound Mod. Does it require any additional changes?
Can u guide on this
Im gonna use it on Official RR5.8.2 (for your reference)
Click to expand...
Click to collapse
It can be used to alter sound volumes beyond the system available values. You need kernel auditor to use it.
riteshsaxena said:
It can be used to alter sound volumes beyond the system available values. You need kernel auditor to use it.
Click to expand...
Click to collapse
Thnx for the information
I flashed X3 on YU+ RR5.8.2 official ROM
Settings to be edited via Kernel auditor app.
Can u share settings
Thnx
Sent from my YU5510 using Tapatalk
mohammad.nomaan said:
Thnx for the information
I flashed X3 on YU+ RR5.8.2 official ROM
Settings to be edited via Kernel auditor app.
Can u share settings
Thnx
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Its there in the second post.
riteshsaxena said:
Its there in the second post.
Click to expand...
Click to collapse
Thnx
I used the settings for Performance and Common as per 2nd post in the Kernel adiutor app.
Can't find settings for sound mod.
Do I need to do any extra settings???
Sent from my SM-N920C using Tapatalk
Update: Reloaded X4Changelogs
*Latest Lineage upstream
*F2FS Fixed and tested
*Reverted smartmax to its original values, means better battery.
*Removed intellithermal due to heating issues.
*Added temp limit in msm thermal
*Updated the interactive script
*Re-added lionfish cpu governor and VR iosched
*Lot of internal changes and minor bug fixes.
Downloads
Without Sound Mod: https://www.androidfilehost.com/?fid=817550096634751128
With Sound Mod: https://www.androidfilehost.com/?fid=817550096634751129
This is the most stable and battery efficient version of Reloaded but still the performance isn't sacrificed.
Will it work with CRdroid v2.3 & resolve random boot issue on wifi??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, I'm GhaithCraft, presenting my custom kernel for Galaxy A7/A5 2017 with tons of tweaks and handy features.
This kernel does not at all drain your battery. (PS: until and unless you don't make some wrong configurations through AKM).
Although this kernel works on custom ROMs it is best optimized for Stock ROMs.
Kernel Info
Linux: 3.18.86
Toolchain: UberTC 6.3.1
Some Feature Highlights
Activated Interactive Governor
GPU Voltage Control through AKM
30+ CPU Governors
I/O Schedulers
LZ4 Compression
Disabled KNOX & TIMA
Powersuspend (Saves Battery)
One click SELinux status change through OKM
NTFS support (Needs testing)
State Notifier
Reduce time to sleep
Dynamic FSync (Improves performance)
Frandom (Faster than the stock random driver)
TCP Algorithms
Working S-Health
ARCH POWER
Disabled CRCs (30% performance boost)
Enable NTFS support
Disabled Forced File Encryption
Disabled Secure Storage
Disabled DM_VERITY
Fake knox 0x0
Ramdisk Tweaked for improve battery and performance
Disabled Logging (Improves performance)
Zen-Tune v4.10 (memmory optimisation)
Add Thunderplug Driver
Improve the ram & battery
Safetynet Green
Enable F2FS support
Private mode
[*]ADB FIXED &Logcat Working at boot (also for a5 2017)
Aroma Installer with advanced tweaking options
With many under the hood optimisation!!!
AROMA INSTALLER OPTIONS
Root through Magisk or SuperSU
Alphabet Kernel Manager (AKM)
Set SELinux to Permissive or Enforcing
ADVANCED OPTIONS: CPU Governor, IO Scheduler, and TCP Congestion Algorithm
CPU Governors
alucard
barry_allen
bioshock
blu_active
cafactive
conservative
dancedance
darkness
electrodemand
HYPER
impulse
intelliactive
intellidemand
intellimm
interactive
ironactive
lionheart
nightmare
ondemand
ondemandplus
ondemand_x
pegasusq
performance
powersave
smartass2
smartmax
smartmax_eps
userspace
wheatley
yankactive
zzmoove
IO Schedulers
fifo
fiops
sio
sioplus
tripndroid
vr
zen
[*]row
[*]bfq
NOTE:This kernel removes forced encryption, if you face "encryption process failed" error upon reboot then you need to format /data. This is generally needed if you are installing this kernel on stock rom
You will need to use AKM(Alphabet Kernel Manager) app to take the most out of the kernel like CPU/GPU overclock, I/O schedulers and plenty of other stuff
Credits
@DarkLord1731 help and support
Samsung Open Source Center for the Source code
@osm0sis for Android Image Kitchen and AnyKernel2
@djb77 for Aroma Installer and various commits from his source
@DarkLord1731 Aroma Installer and various commits from his source
@morogoku for MTweaks
Everyone others who are credited on Github
KEEP THIS DEVELOPMENT ALIVE BY REPORTING BUGS(if any) OR ANY OTHER THING BELOW
HIT THANKS IF YOU LIKE MY WORK:victory:
XDA:DevDB Information
[KERNEL][7.0][A5/7 2017] Alphabet Kernel (B), Kernel for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
GhaithCraft
Source Code: https://github.com/GhaithCraft/Alphabet-Kernel-Universal-7880
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: D
Stable Release Date: 2017-12-16
Created 2017-10-30
Last Updated 2017-12-16
Telegram Group : t.me/A2017GROUP
Downloads
Alphabet Kernel: (All version in Google drive)
Go to #Downloads:Click Here
Or From Google Drive : Click Here
Changelogs :
16/12/17
ADB for a5 2017
Disable a lot more debugging
Upstreamed to Linux 3.18.86
Enable F2FS
Remove default wakelocks
Built with latest UberTC GCC6 Stable To improve battery
Private mode working (but need rom supports)
More tweak in ramdisk
Interactive improved
can see more in source :fingers-crossed:
25/11/17
Update AKM to V2
Enable Boeffla Wakelock Blocker
Add init.d tweak in ramdisk
More upstream
update to 3.18.81
update to latest source and ramdisk
BFQ IO scheduler optimisations
To see more see the source
To see more see the source
Add Thunderplug Driver
ADB FIXED (Logcat Working at boot )
12/11/17
LZ4 Optimisations
Allow toggle CRCs through AKM
Enabled support for ARCH_POWER
Merged with the latest 3.18.79 upsream kernel
Reduce time to sleep
Deadline IO scheduler optimisations
Some ramdisk tweaks
Enabled "Optimise for performance instead of size"
Update Blu_active Governor
Updated toolchain
Disabled All Logging
Disabled OOM
Google Services Doze
Deep sleep optimisations
optimize Kernel Samepage Merging (KSM)
Disable I/O Stats and Add Random
sched: Disable gentle fair sleepers
Fix all bugs in Aroma And AKM APP
30/10/17
Initial Release
First! And thanks. I've been waiting for a custom kernel for the A5 2k17 Nougat! :victory:
Finally,tnx gaith because you has returned the life of development of a5 2017❤
Note:sorry for my bad english
GhaithCraft said:
Hi, I'm GhaithCraft, presenting my custom kernel for Galaxy A7/A5 2017 with tons of tweaks and handy features.
This kernel does not at all drain your battery. (PS: until and unless you don't make some wrong configurations through AKM).
Although this kernel works on custom ROMs it is best optimized for Stock ROMs.
Click to expand...
Click to collapse
any chance for A3 users having this kernel?
Thank you, hoping you continue.
broky said:
any chance for A3 users having this kernel?
Click to expand...
Click to collapse
Coming aoon
Thank you for your work. Can you edit the download link for Alphabet Kernel Manager please? Because it doesn't work.
Nice! Thank you very much! hows the battery life with this kernel? We just need fully working LO Rom and it will be great!.
Hi! First of all: I'm glad to see that the development for this device is not dead!
With that out of the way: Flashed it and it's working great ! Looking forward to future updates !
EDIT: Apply on boot doesn't seem to be working in your kernel manager... I have to set everything manually at every boot :/
Kernel
GhaithCraft said:
Hi, I'm GhaithCraft, presenting my custom kernel for Galaxy A7/A5 2017 with tons of tweaks and handy features.
This kernel does not at all drain your battery. (PS: until and unless you don't make some wrong configurations through AKM).
Although this kernel works on custom ROMs it is best optimized for Stock ROMs.
Kernel Info
Thank you brother! It works! Do please minimum CPU 343 A7:good:
---------- Post added at 02:20 PM ---------- Previous post was at 02:16 PM ----------
Click to expand...
Click to collapse
Everything works perfect thank you so much for this , Love you
I got some prop errors at installing but it works perfect and stable without any problems thanks you so much
Help please! Install kernel first and format data or format data and install kernel? Thanks
fahric74 said:
Help please! Install kernel first and format data or format data and install kernel? Thanks
Click to expand...
Click to collapse
Format DATA > Flash the kernel > Flash no-verity-no-encrypt patch by ashyx. You're good to go
Thanks for your work! Can I use Samsung Pay with Alphabet Kernel cauze fake knox 0x0?
Isn't there way to enable all the cores because this fu***ng big.LITTLE qualcomm cpus annoys me so much. I just want to set the governon
My knox is still void???
Trillian_123 said:
Hi! First of all: I'm glad to see that the development for this device is not dead!
With that out of the way: Flashed it and it's working great ! Looking forward to future updates !
EDIT: Apply on boot doesn't seem to be working in your kernel manager... I have to set everything manually at every boot :/
Click to expand...
Click to collapse
you need wait 10 sec or can change this from settings
GhaithCraft said:
you need wait 10 sec or can change this from settings
Click to expand...
Click to collapse
Still nothing. Waited for around 10+ min. Also tried execute as shell script :/
Unfortunately doesn't seem to work on Lineage 14, sat around for a while but was stuck on a bootloop.
Code:
Do not ask for ETA's.
I am not responsible for bricked devices, dead SD cards, thermonuclear war,
or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this Kernel before flashing it!
YOU are choosing to make these modifications,
and if you point the finger at me for messing up your device, I will laugh at you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MiNT Kernel
A fork of voidKernel designed to increase battery life.
Code:
[I]voidKernel Features[/I]
Based on the latest CAF tag (LA.UM.6.6.r1-09000-89xx.0)
Up to date with the latest Linux version (3.18.114)
WireGuard VPN tunnel support included
LZ4 compression for ZRAM enabled by default
KCAL color control
Vibration intensity control for qpnp-haptics interface
Some essential patches that you can also find in Google kernels
Westwood TCP congestion algorithm enabled by default
No excessive and useless bloat
Code:
[I]MiNT Features[/I]
100HZ for best battery and performance
20mV global CPU undervolt
Adreno Idler
Boeffla wakelock blocker
DT2W (Double tap to wake)
Frandom RNG driver
Intellithermal v3.1
Power Suspend
Qnovo charging driver for maintaining temperature
State notifier
Tuned input & output audio
USB Fast Charge
Tweaked Interactive, Blu_Active, Impulse, & Relaxed [B](Default)[/B]
Autosmp Hotplug, & Optimized Lazyplug Hotplug [B](Default, for it to be aggressive select the Lazy Profile in CPU Hotplug in Kernel Auditor.)[/B]
Maple I/O [B](Default)[/B]
Under the hood changes
And more to come!
New builds are at the bottom of the list.
For Custom ROMS
For Stock ROM
flex1911
franciscofranco
frap129
gougous3
LazerL0rd
sayeed99
Sultanxda
userisamonkey
Some more people I cherry picked commits from
Feel free to cherry pick commits from the kernel's git! Lets push our devices development by keeping things open source!
XDA:DevDB Information
MiNT Kernel, Kernel for the Xiaomi Mi A1
Contributors
GamingDevilsCC, flex1911, mountaser halak
Source Code: https://github.com/GamingDevilsCC/android_kernel_xiaomi_msm8953
Kernel Special Features: Improved Battery Life
Version Information
Status: No Longer Updated
Created 2018-03-18
Last Updated 2018-11-17
Changelog
I no longer have time to maintain this project, sorry everyone.
Upcoming Build (unreleased)
Catch up to voidKernel r29
Code:
r29 (014.09.2018):
Linux 3.18.122
Merged LA.UM.6.6.r1-09700-89xx.0 CAF tag
Initial treble support
r28 (0.9.09.2018):
Linux 3.18.121
r27 (01.09.2018):
Updated to 8.1 Xiaomi base
Linux 3.18.120
Merged LA.UM.6.6.r1-09600-89xx.0 CAF tag
Updated Wi-Fi driver to LA.UM.6.6.r1-09600-89xx.0 (custom version only)
r26 (19.08.2018):
Linux 3.18.119
r25 (09.08.2018):
Linux 3.18.118
Merged LA.UM.6.6.r1-09500-89xx.0 CAF tag
Updated Wi-Fi driver to LA.UM.6.6.r1-09500-89xx.0 (custom version only)
r24 (28.07.2018):
Linux 3.18.117
Merged LA.UM.6.6.r1-09400-89xx.0 CAF tag
Updated Wi-Fi driver to LA.UM.6.6.r1-09400-89xx.0 (custom version only)
r23 (22.07.2018):
Linux 3.18.116
Merged LA.UM.6.6.r1-09200-89xx.0 CAF tag
Updated Wi-Fi driver to LA.UM.6.6.r1-09200-89xx.0 (custom version only)
r22 (12.07.2018):
Linux 3.18.115
Added DTS-Eagle driver support. DTS-Eagle is an audio effect which simulates surround sound similar to what Dolby does, however, it is considered more "premium" and provides a much deeper level of immersion. This is an experimental implementation.
Add fsync on/off support.
Readded S2W/S2S.
Undervolt by another 5mv, to a total of a 25mv global undervolt.
Optimized audio codec.
Under the hood changes.
Build 20180706 (July 6, 2018)
Current Issues
On latest build, I've accidentally removed a commit that made the Relaxed governor as default. To switch your governor to Relaxed, use an app called Kernel Auditor until next build is released with fix.
Catch up to voidKernel r21
Code:
r21 (03.07.2018):
Linux 3.18.114
Merged LA.UM.6.6.r1-09000-89xx.0 CAF tag
Updated Wi-Fi driver to LA.UM.6.6.r1-09000-89xx.0 (custom version only)
r20 (18.06.2018):
Merged LA.UM.6.6.r1-08900-89xx.0 CAF tag
Updated Wi-Fi driver to LA.UM.6.6.r1-08900-89xx.0 (custom version only)
r19 (14.06.2018):
Linux 3.18.113
r18.1 (03.05.2018):
Linux 3.18.112 (basically has no changes that affect us)
Update Wi-Fi driver to LA.UM.6.6.r1-08600-89xx.0
r18 (30.05.2018):
Linux 3.18.111
Merged LA.UM.6.6.r1-08600-89xx.0 CAF tag
r17.1 (29.05.2018):
Fixed Wi-Fi MAC address on custom ROMs
r17 (27.05.2018):
Linux 3.18.109
Linux 3.18.110
Merged LA.UM.6.6.r1-08500-89xx.0 CAF tag
Added BFQ scheduler as an option (maple is still enabled by default)
Minor fixes
r16 (02.05.2018):
Linux 3.18.108
Added 20mV global CPU undervolt.
Removed Overclocking. GPU & CPU overclocking will no longer be added in the kernel, as it is not effective in this kernel, and also reduces battery life.
Removed Fingerprint Boost Driver. While it is not useless, we want strive to maximize battery life as much as possible and removing this helps.
Tuned lazyplug for MSM8953.
Tuned input & output audio.
Reworked DT2W. It will now work like Meta Phoenix's implementation.
Removed S2W/S2S.
Under the hood changes.
20180430 (April 30,2018)
Catch up to voidKernel r15
Code:
r15 (29.04.2018):
Linux 3.18.107
r14 (28.04.2018):
Merged LA.UM.6.6.r1-08300-89xx.0 CAF tag
Added GPU overclocking & correctly implement CPU overclocking with higher voltages? (These WILL use more battery. I do not recommend the higher voltages as overvolting uses more power, and reduces the lifespan of your device.)
Changed default governor to Relaxed. Relaxed is based on chill (which is based on conservative), and has been altered in order to achieve more gradual frequency boosting providing battery life benefits.
Build 20180427 (April 27, 2018)
Catch up to voidKernel r13
Code:
r13 (24.04.2018):
Linux 3.18.106
r12.1 (18.04.2018):
Enabled TTL target support
r12 (14.04.2018):
Linux 3.18.105
r11 (13.04.2018):
Linux 3.18.104
Merged LA.UM.6.6.r1-07400-89xx.0 CAF tag
Built with the latest GCC snapshot from AOSP
Added Lazyplug hotplug by @arter97. (Cherrypicked from ProjectK by @khusika)
Added Relaxed governor.
Added under/overclocking with cmdline option? (Power savings would be minimal as the voltage is not changing.)
Build 20180411 (April 11, 2018)
Catch up to voidKernel r10
Code:
r10 (08.04.2018):
Linux 3.18.103
Attempted to fix baseband issues with Magisk installed
Various minor kernel updates for LZ4 routines, BT, display etc.
Linux 3.18.104 from voidKernel commits.
Converted Adreno Idler to State Notifier.
Changed the initial GPU freq to 133MHz. This allows Adreno Idler to idle on the lowest frequency of 133MHz, instead of fluctuating between 216MHz - 320MHz.
Fixed Impulse governor.
Under the hood changes such as tuned tcp_westwood.
Build 20180408 (April 8, 2018)
Added Boeffla wakelock blocker.
Added frandom RNG driver.
Added State notifier.
Fixed Impulse governor.
Reverted "Fast Charge to 2500ma".
Under the hood changes.
Build 20180405 (April 5, 2018)
Added Intellithermal v3.1
Added Qnovo charging driver for maintaining temperature
Added Impulse governor. (Impulse aims to have a balance between battery and performance just like interactive but has some tweaks to save battery.)
Under the hood changes.
Build 20180330 (March 30, 2018)
Catch up to voidKernel r9
Code:
r9 (30.03.2018):
Merged LA.UM.6.6.r1-07200-89xx.0 CAF tag
Enabled BALANCE_ANON_FILE_RECLAIM for better ZRAM performance
r8 (27.03.2018):
Linux 3.18.102
Reverted back to 100Hz timer (less scheduler overhead and power consumption)
Built with -O2 optimizations (this slightly improves boot performance and binder throughput)
Reverted back to the stock wlan module
Introduced cmdline hacks for SafetyNet (now kernel passes cts test and reports proper status even without Magisk)
r7 (22.03.2018):
Linux 3.18.101
Raised timer frequency to 300Hz to avoid severe latencies under high-load conditions
Updated touchscreen driver for the custom version to properly support features like DT2W and key disabler
Added
USB Fast Charge
Fast Charge to 2500ma
Fingerprint Boost Driver
Maple I/O (Default)
Interactive (Default) & Blu_Active
& some under the hood changes
Build 20180319 (March 19, 2018)
Catch up to voidKernel r6
Code:
r6 (19.03.2018):
Linux 3.18.100
Updated configuration per AOSP recommendations
Enabled various of recommended HID drivers
General cleanup
r5.1 (18.03.2018):
Fixed ft5435 touchscreen driver power management
Removed a huge chunk of useless and harming debugging code from Xiaomi
Added DT2W thanks to the help of sayeed99!
Build 20180318 (March 18, 2018)
Added Adreno Idler
Added Power Suspend
Added Autosmp Hotplug
Q&A
Q: Why is DTS-Eagle not working for me?
A: This kernel only has wcd9335 DTS-Eagle support cherrypicked from here. The rest of compatibility will have to depend on ROM support for it. So far no Mi A1 ROMs work with it.
AutoSMP ? Will test as soon as I can
In case you plan to ditch it, I'd recomend PegasusQ
Hey, you'll be making the kernel for stock too??
---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------
DT2W...?
prabhjot-singh said:
Hey, you'll be making the kernel for stock too??
---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------
DT2W...?
Click to expand...
Click to collapse
Stock release will come in the next update, along with more features!
Great, works so far, void gave me a very good battery/performance, let's see tomorrow what mint will do. Big thanks for sharing and spending your time on this.
Btw: kernel version is shown as unavailable under system.
coremania said:
Great, works so far, void gave me a very good battery/performance, let's see tomorrow what mint will do. Big thanks for sharing and spending your time on this.
Btw: kernel version is shown as unavailable under system.
Click to expand...
Click to collapse
I'll see what I can do about that! :good:
Please making for stock rom! ?
Will DT2W be added at some point?
Thank you for sharing, will have a look, I will try to build an 8.x ROM with this kernel
black_arashi said:
Thank you for sharing, will have a look, I will try to build an 8.x ROM with this kernel
Click to expand...
Click to collapse
Just be sure to credit @flex1911, because MiNT is a fork of voidKernel, and without him this kernel wouldn't be possible!
Hope you add OC soon! Thanks
t0per666 said:
Hope you add OC soon! Thanks
Click to expand...
Click to collapse
I'm trying too!
ProchyGaming said:
Will DT2W be added at some point?
Click to expand...
Click to collapse
Have the same question in mind
arjunbalan1994 said:
Have the same question in mind
Click to expand...
Click to collapse
I'm wanting to as I used to use DT2W but I'll need to see if our device supports it fully. Our chipset definitely does, but I'll need to check about the display and maybe some others too.
GamingDevilsCC said:
I'm wanting to as I used to use DT2W but I'll need to see if our device supports it fully. Our chipset definitely does, but I'll need to check about the display and maybe some others too.
Click to expand...
Click to collapse
Take your own time Dev No rushing
Mido has that feature out of box so it will be nice to have that for tissot too will wait for your progress
Does instal custom kernel will overwrite magisk and twrp permanent?
exodius48 said:
Does instal custom kernel will overwrite magisk and twrp permanent?
Click to expand...
Click to collapse
No it won't
GamingDevilsCC said:
Stock release will come in the next update, along with more features!
Click to expand...
Click to collapse
Hello waiting for stock very thanks
regards