I'm using TWRP recovery and I accidentally deleted the internal storage while trying to flash a custom ROM.
I have searched high and low for solutions but have found nothing.
I wanted to adb sideload a ROM but alas my computer (W8.1) will not detect the device. I know it's not a pc problem as it detects the ADB on my S6.
When I plug in my Mi3 in recovery mode, my computer just beeps and then nothing. No device found even if Device Manager. It still charges though.
When I plug it in in fastboot, the computer says usb not recognized.
Tried everything I could. Please help!
if you have a OTG pen drive or a pendrive with otg cable then format the pendrive with fat32 file system and then copy the ROM file in the pen drive which you want to flash. Now connect this pendrive with your phone and boot into twrp, this will detect the pendrive.
Now goto Advanced/File Manager
Goto /usbotg folder and copy the rom file and then paste it into /sdcard. Now the ROM file is ready to get flashed.
shadab007g said:
if you have a OTG pen drive or a pendrive with otg cable then format the pendrive with fat32 file system and then copy the ROM file in the pen drive which you want to flash. Now connect this pendrive with your phone and boot into twrp, this will detect the pendrive.
Now goto Advanced/File Manager
Goto /usbotg folder and copy the rom file and then paste it into /sdcard. Now the ROM file is ready to get flashed.
Click to expand...
Click to collapse
Thanks for the reply!
Is that my only option right now? I don't have a pendrive and would maybe buy it as a last option. But if it's the only way then so be it.
ilqs said:
Thanks for the reply!
Is that my only option right now? I don't have a pendrive and would maybe buy it as a last option. But if it's the only way then so be it.
Click to expand...
Click to collapse
okay so you can also try one more method.(but I am not sure if this will work with fastboot or not)
Download a software named as AdbDriverInstaller.exe into your PC .
Goto fastboot mode and connect your phone with pc then click "Install".
I hope this will install the Adb driver.
Note: As you are on w8.1 try to disable driver signature verification(google it if you dont know about it) if the above method fails and then try again.
shadab007g said:
okay so you can also try one more method.(but I am not sure if this will work with fastboot or not)
Download a software named as AdbDriverInstaller.exe into your PC .
Goto fastboot mode and connect your phone with pc then click "Install".
I hope this will install the Adb driver.
Note: As you are on w8.1 try to disable driver signature verification(google it if you dont know about it) if the above method fails and then try again.
Click to expand...
Click to collapse
I downloaded the file and connected my phone ion fastboot but the program does not recognize the device at all.
Thank you for the help though!
BTW did you tried opening the bat files after extracting the fastboot ROM? Instead of using any software I just use the bat files to flash ROM
Me_Ashish_ said:
BTW did you tried opening the bat files after extracting the fastboot ROM? Instead of using any software I just use the bat files to flash ROM
Click to expand...
Click to collapse
Sorry for sounding ignorant but can you link me to somewhere where I can learn to do that? A guide of some sort.
But the main problem is that I can't connect to whatever computer I can get my hands on.
Would doing this on Linux make a difference?
https://www.androidfilehost.com/?fid=9390355257214632011 this should be the zip I believe (I have the zip, but not downloaded from there). After extracting. In extracted folder press right click with shift to open command prompt in the folder. Connect phone in fastboot mode. Enter fastboot devices command in cmd to see if you can see the device
Related
one noob question..
how to install CWM-based Recovery 5.0.2.7-R2 by rusty?
try to flash through cwm..it said installation abort
march173 said:
try to flash through cwm..
Click to expand...
Click to collapse
So, you already have cwm (can`t flash cwm with cwm )... If you want this version, just download, connect phone to pc (usb debugging on), pick internal or external version and run install bat file (if you are on windows or choose another os). Or try via rom manager.
yup..older version of cwm..thanks..
march173 said:
yup..older version of cwm..thanks..
Click to expand...
Click to collapse
As he said, extract the zip file on your computer, plug your device without mounting USB mass storage (USB debug on),then double click on the *.bat file corresponding to the version you want to install (internal sdcard or external sdcard) and that's it. If you are under linux, check the permissions of th *.sh file (must be executable) and double click it or run it from terminal.
With Windows 7 run as administrator I think (I use linux so can't say).
Here is the story in a nutshell I flashed xdabbeb's bootstack, then his rom. Then I did something stupid such as wipe everything folks, I mean everything. So my phone then restarted and I am able to get into recovery twrp 2.7.
I have tried in twrp to sideload, mount neither which work.
I have my drivers installed it says in device manager when I plug the phone up for download mode
android- galaxy nexus adb
and under ports it says LGE AndroidNet for VZW ADB Interface com41
I tried lg flash tool, tried with old vs98010b rom
pid:
imei:
model:
dll: vs980
bin: vs98010b_13.tot
swv:
swov:
model information check fail!
00000000
I really need help guys, are there any adb commands I can type or are there any drivers I need to install
Ok when i hold the up and plug in it takes me to fastboot
[500] fastboot mode started
[550] udc_start()
[720] reset
[730] portcharge
[740] reset
[750] portcharge
and the device only registers as android under other on my computer
i've installed lg drivers
How can you fastboot flash? When I hold up and plug in for fastboot my computer wont register a driver just shows android what are the commands and how do I use fastboot
timenewton said:
How can you fastboot flash? When I hold up and plug in for fastboot my computer wont register a driver just shows android what are the commands and how do I use fastboot
Click to expand...
Click to collapse
Download mode is not going to work because the laf partition (this allows for download mode to work) is wiped when you flash xdabbeb's bootstack in favor of fastboot mode.
I suggest you pm xdabbeb; he will guide you on the steps to using the necessary fastboot commands to get your phone working again. He's already helped a few people that were in the same situation as you are in right now.
Fastboot is good because you can write certain partitons at a time without having to .tot and wipe your whole phone.
You could also flash his xdabbeb_vs98024a_laf.zip http://www.androidfilehost.com/?fid=23329332407586639 file in TWRP 2.7 to restore download mode, but you will end up wiping your whole phone by using the LG Flash Tool, even your sd card when you restore your phone.
You said you "wiped everything", I'm not sure if that means your sd card too, if so, then that might be the easiest thing to do since you still have access to recovery. You will need an otg cable and a flash drive to mount the flash drive in TWRP 2.7 and flash the file, unless you can side load the file with adb.
Either way, like I mentioned earlier, it might be a good idea to pm xdabbeb first.
Hey my phone is already wiped even sdcard, but the thing is i cant flash that file because I can not get it on my phone. So ill ask xdabbeb the fastboot commands. Yeah and I read about the otg cable, ordered one of those babies should be here this saturday and hopefully it will mount my flash drive in that case id be golden untill then ill see what mr xdabbeb has to say.
cant sideload
everytime i try to sideload the file it just says cant read file or something like that
And I really appreciate you responding. Always nice to get support from somebody when your just sitting here and your phone seems like it hasnt been working for an eternity. Almost depressing not hearing from anyhbody and just seeing all the views but no replys. Thank you
Hey there...Fastboot is about as basic/simple/reliable as it comes. If you have adb/fastboot set up properly then command is:
fastboot flash <partition> <filename>
for example:
fastboot flash recovery recovery.img
In your case, you claim to have a working recovery (twrp 2.7), but are unable to copy files from your computer to your phone. It sounds like you don't have the proper drivers installed so that you can use adb from recovery. This is a common/known issue with windows and I believe I replied to you in the rom thread already about this, but you need to install/use Koush's universal adb driver and simply copy the rom file over to your phone using the following command:
adb push <filename> /sdcard/
After you have the file there you can flash it as normal in recovery.
If you want to use a kdz/tot method to restore your phone, just download the laf zip file from my thread, extract the laf.img file from the zip, and use the following command to put it in place:
fastboot flash laf laf.img
Then you can go about the tot restore method described in the thread here. You don't need to put the tot file itself on your phone. It just needs to be on your computer.
I get to sdk and open cmd
type adb devices it says
List of devices attached
0215817d960ce580 sideload
Then I type adb push rom.zip /sdcard/
error: closed
When phone is plugged in for adb device manager says under android device- Google galaxy Nexus ADB Interface
I have universal drivers installed and I goto device manger to update drivers where clockworkmod is installed and it doesnt do anything
Fastboot it says in other devices in device manager
Android
PCI Data Acquisition and Signal Processing Controller
I type fastboot flash recovery laf.img
<waiting for device>
timenewton said:
I get to sdk and open cmd
type adb devices it says
List of devices attached
0215817d960ce580 sideload
Then I type adb push rom.zip /sdcard/
error: closed
When phone is plugged in for adb device manager says under android device- Google galaxy Nexus ADB Interface
I have universal drivers installed and I goto device manger to update drivers where clockworkmod is installed and it doesnt do anything
Fastboot it says in other devices in device manager
Android
PCI Data Acquisition and Signal Processing Controller
I type fastboot flash recovery laf.img
<waiting for device>
Click to expand...
Click to collapse
Wait, I'm confused here a little bit. Are you trying to do sideload mode in TWRP or are you using fastboot mode?
And the command you typed is not correct fastboot flash recovery laf.img...you don't want to do that...this would flash the laf.img in your recovery partition.
xdabbeb referenced two methods to you...one was pushing a Rom to your sdcard and then flashing that Rom in TWRP to get your phone booting...the other was to flash the laf.img file and do a .tot if that's what you prefer.
It seems like you want to do a .tot restore, so do the second method xdabbeb suggested.
Get into fastboot mode and type fastboot flash laf laf.img
Make sure you use the correct laf.img...you can extract it from the zip in my previous post/link.
After this your download mode should be working again.
I was trying either one
For fastboot I downloaded xdabbebs laf
the image file in his file is laf.img, if thats not the right file then where is the recovery.img
So the recovery.img would have been one that i made?
and laf is so I can us lg tool to tot flash?
Even when i try to flash the laf it keeps saying waiting for device. I have the drivers koushu installed and lg
timenewton said:
I was trying either one
For fastboot I downloaded xdabbebs laf
the image file in his file is laf.img, if thats not the right file then where is the recovery.img
So the recovery.img would have been one that i made?
and laf is so I can us lg tool to tot flash?
Click to expand...
Click to collapse
Yes, download xdabbeb's laf.img, it's the link I gave you originally. You will have to take out the laf.img file from the zip file that is called xdabbeb_vs98024a_laf.zip
The recovery command he gave was just an example, there was no need for you to use it.
Yes, flashing the laf.img will fix your download mode and you will be able to do the .tot method.
What am I suppose to do about it saying wiating for device, its not detecting it
timenewton said:
What am I suppose to do about it saying wiating for device, its not detecting it
Click to expand...
Click to collapse
That sounds like a driver issue. Reboot your computer and turn off the phone and start again. See if that helps. You can also remove the drivers and re-install...I suggest you reboot your computer every time you install new drivers.
EDIT:
Are you using a newer adb.exe from your android sdk? If you have ioroot25 installed on your computer I suggest you use the folder/files from there. It has a newer adb.exe in there; put your laf.img file in that folder too if you do use that instead, and run the command prompt from within that folder.
Ok when my phone is plugged into my comp, im on win 7 it shows up as android under other devices when started in fastboot mode. When I browse to the driver location to load for the android it says no driver found for it.
Yes i just installed the sdk like 2 days ago so I know its current.
As far as the driver situation, why would I need to uninstall if it isnt even installing a driver.
This is terrible
timenewton said:
Ok when my phone is plugged into my comp, im on win 7 it shows up as android under other devices when started in fastboot mode. When I browse to the driver location to load for the android it says no driver found for it.
Click to expand...
Click to collapse
timenewton said:
Yes i just installed the sdk like 2 days ago so I know its current.
As far as the driver situation, why would I need to uninstall if it isnt even installing a driver.
This is terrible
Click to expand...
Click to collapse
For me it shows up under "ADB Interface", but I don't have the universal driver installed.
I didn't realize it wasn't installing the driver for you.
You have to get that driver going or you won't be able to get your phone fixed. Maybe try a different usb port or a different computer.
Man yeah mine doesnt look at all like that. Im uninstalling lg driver and universal one and clearing temp folder. Then restart and reinstall maybe that will work. So its just the koushu driver that works for fastboot and adb right?
timenewton said:
Man yeah mine doesnt look at all like that. Im uninstalling lg driver and universal one and clearing temp folder. Then restart and reinstall maybe that will work. So its just the koushu driver that works for fastboot and adb right?
Click to expand...
Click to collapse
Yeah, it should work. I've read posts by others stating that it works.
Yep just reinstalled the universal drivers, plug phone up into fastboot and still get the same result
Can you perhaps send me that driver you have? Because I know if you have that one and it works for you it SHOULD work for me. Murphs law is killing me. I can pm you my email address
I had to use a factory reset to decrypt my phone. TWRP was asking a password (a known bug, nothing works) and I did a factory reset using TWRP. Now I get the message "No OS Installed! Are you sure you wish to reboot?".
What is the easiest way to install OS? I want to use CyanogenMod and I have the latest build zip file. M7 doesn't support SD cards but I have OTG USB stick and I've copied cm-11-20141112-SNAPSHOT-M12-m7.zip there. I don't know if TWRP can recognize the drive. Windows doesn't currently recognize my device.
I don't have a recovery backup because decrypting my memory (stock encryption) apparently wiped that out.
Please help me, I have to get my phone up and running again!
TWRP 2.8.6.0
I found the folder "usb-otg" but TWRP doesn't recognize CyanogenMod zip file. I'm on the install menu.
Is it safe to turn off my phone now? Maybe I just turn off the screen and connect the phone to charger.
Musicbee said:
I found the folder "usb-otg" but TWRP doesn't recognize CyanogenMod zip file. I'm on the install menu.
Is it safe to turn off my phone now? Maybe I just turn off the screen and connect the phone to charger.
Click to expand...
Click to collapse
The file you have is 18 months old
look in the developer forums for something newer
you doing it right just copy the zip to the OTG and plug it into your phone and install it
clsA said:
The file you have is 18 months old
look in the developer forums for something newer
you doing it right just copy the zip to the OTG and plug it into your phone and install it
Click to expand...
Click to collapse
Yeah, I just noticed that (does it matter?). Can you recommend me a relatively stable build?
What is usually the name for USB OTG device folder in file explorer? "Usb-otg" folder exists even when no device is connected to my phone. I don't think that TWRP recognizes the drive.
EDIT: I found my USB device!
Musicbee said:
Yeah, I just noticed that (does it matter?). Can you recommend me a relatively stable build?
What is usually the name for USB OTG device folder in file explorer? "Usb-otg" folder exists even when no device is connected to my phone. I don't think that TWRP recognizes the drive.
Click to expand...
Click to collapse
when the drive is plugged in just click storage and choose usb-otg
If you want a simple non sense rom I would use this
http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927
Please tell me if it's safe to reboot my device now?
CM is now working fine, haven't noticed any issues. I still need Google apps.
Hai guys...
This is a problem that i have encountered myself whrn using the phone Xiaomi Redmi Note 4g. I was trying to update my system using inbuilt system updater.. Don't know how but it suddenly finished installing and promted me to reboot.But after reboot i got stuck on the Fastboot screen..
I couldn't access my recovery options as well i had twrp already installed..
Since then i surfed the net and also XDA to find a solution to this..
Referring a lot of threads a found a way and made it work and i would like to share it with you..
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Code:
C:\\Program Files\Minimal Adb and Fastboot
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
Code:
fastboot devices
After executing you can see a device if have connected.. If this happens we can carry on
Then type
Code:
fastboot flash recovery twrp.img
After this twrp will install on ur phone..
Now this
Code:
fastboot boot twrp.img
This will take the phone directly to the TWRP
There first u need to click on wipe >>advanced wipe>>select everything except your external sd (if u have one)>> Swipe
After it is complete copy the rom files to the internal storage of the device(Now it will be connected to the pc)
After completely copying Click on Install>> select the rom from the internal >> swipe
Then wait for the rom to flash..
After flashing wipe the davlik cache..
Also flash Gapps.. if u want root u can also flash supersu as well
Now reboot the phone ..n ..enjoy
Hit the button if u liked my post and also feel free to comment if u have any doubts (quote me or i wont know)..
Here is download links
The rom i suggested CM14
https://forum.xda-developers.com/re...edmi-note4g-cm14-1-android-nougat7-1-t3499074
Open Gapps
http://opengapps.org/?download=true&arch=arm&api=7.1&variant=pico
TWRP
http://roms.gerrett84.de/dior/twrp/stable/
ADB
https://www.androidfilehost.com/?fid=745425885120698566
Screenshots after new ROM installation
Kudosss....
Thansk a lot. It worked well. But saddest thing is i couldnt find CM ROM which you recommended. But mobile started working.
manikumar1988 said:
Kudosss....
Thansk a lot. It worked well. But saddest thing is i couldnt find CM ROM which you recommended. But mobile started working.
Click to expand...
Click to collapse
You can find it in here.
Adarsh balu said:
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Code:
C:\\Program Files\Minimal Adb and Fastboot
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
Code:
fastboot devices
After executing you can see a device if have connected.. If this happens we can carry on
Then type
Code:
fastboot flash recovery twrp.img
After this twrp will install on ur phone..
Now this
Code:
fastboot boot twrp.img
This will take the phone directly to the TWRP
There first u need to click on wipe >>advanced wipe>>select everything except your external sd (if u have one)>> Swipe
After it is complete copy the rom files to the internal storage of the device(Now it will be connected to the pc)
After completely copying Click on Install>> select the rom from the internal >> swipe
Then wait for the rom to flash..
After flashing wipe the davlik cache..
Also flash Gapps.. if u want root u can also flash supersu as well
Now reboot the phone ..n ..enjoy
Hit the button if u liked my post and also feel free to comment if u have any doubts (quote me or i wont know)..
Click to expand...
Click to collapse
thank you so much. already tried many solution, and then i found yours and voila, worked like a charm. :good::good:
raizelvaizen said:
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
After executing you can see a device if have connected.. If this happens we can carry on
Then type
After this twrp will install on ur phone..
Now this
thank you so much. already tried many solution, and then i found yours and voila, worked like a charm. :good::good:
Click to expand...
Click to collapse
Happy to help
Hello, I did as you describe but it tell me I can't copy the rom because of not enough storage...what should I do ?
Adarsh balu said:
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Code:
C:\\Program Files\Minimal Adb and Fastboot
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
Code:
fastboot devices
After executing you can see a device if have connected.. If this happens we can carry on
Then type
Code:
fastboot flash recovery twrp.img
After this twrp will install on ur phone..
Now this
Code:
fastboot boot twrp.img
This will take the phone directly to the TWRP
There first u need to click on wipe >>advanced wipe>>select everything except your external sd (if u have one)>> Swipe
After it is complete copy the rom files to the internal storage of the device(Now it will be connected to the pc)
After completely copying Click on Install>> select the rom from the internal >> swipe
Then wait for the rom to flash..
After flashing wipe the davlik cache..
Also flash Gapps.. if u want root u can also flash supersu as well
Now reboot the phone ..n ..enjoy
Hit the button if u liked my post and also feel free to comment if u have any doubts (quote me or i wont know)..
Click to expand...
Click to collapse
Thanks man! You just saved my life
Adarsh balu said:
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Code:
C:\\Program Files\Minimal Adb and Fastboot
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
Code:
fastboot devices
After executing you can see a device if have connected.. If this happens we can carry on
Then type
Code:
fastboot flash recovery twrp.img
After this twrp will install on ur phone..
Now this
Code:
fastboot boot twrp.img
This will take the phone directly to the TWRP
There first u need to click on wipe >>advanced wipe>>select everything except your external sd (if u have one)>> Swipe
After it is complete copy the rom files to the internal storage of the device(Now it will be connected to the pc)
After completely copying Click on Install>> select the rom from the internal >> swipe
Then wait for the rom to flash..
After flashing wipe the davlik cache..
Also flash Gapps.. if u want root u can also flash supersu as well
Now reboot the phone ..n ..enjoy
Hit the button if u liked my post and also feel free to comment if u have any doubts (quote me or i wont know)..
Click to expand...
Click to collapse
Sir,what if i can still access twrp and recovery?
duypro247 said:
So first read my guide carefully if u are a noobie and wish to learn it step by step..
So first u need a pc..
Install abd drivers on pc,(i will provide all the download link later)
Now i shall say if this happens to u probably your whole Rom must be gone with ur internal data.So i suggest u use a new rom instead.Since i have tried a lot of roms in this section the one which looked good without any errors is the CM14 Rom..
So download it..If you are stuck in fastboot screen u cannot copy it yet onto your phone.
So now u got to download the latest version of TWRP into the folder where the ADB is installed...i.e inside the folder
Its default on Windows pc is
Ok if u have copied the twrp file into the adb folder u have to rename it as just "twrp" for ur convenience (ignore ")
Then open a command prompt there by pressing SHIFT and Right mouse button
Plug your phone into pc and just switch it on (since you have the problem you don't need to manually go to fastboot ..it will directly goto the fastboot)
Otherwise press the power button and the volume down button together for the fastboot screen
Just type
After executing you can see a device if have connected.. If this happens we can carry on
Then type
After this twrp will install on ur phone..
Now this
Sir,what if i can still access twrp and recovery?
Click to expand...
Click to collapse
Then i suppose there is no issue here ... You can directly change your rom.:laugh:
nana0 said:
Hello, I did as you describe but it tell me I can't copy the rom because of not enough storage...what should I do ?
Click to expand...
Click to collapse
You should wipe your storage.. :good:
Adarsh balu said:
You should wipe your storage.. :good:
Click to expand...
Click to collapse
hello i have the same issue here that i my phone only booted to fastboot and i cant intall twrp because my usb debugging is turned off before this happened. pls help me
keirth1 said:
hello i have the same issue here that i my phone only booted to fastboot and i cant intall twrp because my usb debugging is turned off before this happened. pls help me
Click to expand...
Click to collapse
Is there an alternative recovery in that device. Can give attach images because i don't have this device right now so I can't help you without seeing what's on the device
Redmi Note 5 same problem?
Man thanks for sharing... But what if i face the same problem with RedmiNote 5? Which files should I use?
"After it is complete copy the rom files to the internal storage of the device(Now it will be connected to the pc)"
How can I copy the Rom File since internal memory has no ROM and can't copy ROM file from PC to Mobile storage during TWRP and FASTBOOT state!
hi i have problem with cant load boot thingy, help???
Can't download CM14 from the link provided
Hey,
It seems that the link for CM14 doesn't work.. Could you lease send me the valid one? Many thanks!
Redmi note 5 pro(whyred) A sad story
Sir in my case I unlocked the bootloader and installed ressurection remix v7 using RedWolf recovery but the system did not boot up instead it kept on booting into fastboot mode. I thought of installing some other rom via rw recovery but I was unable to access the internal storage or external_sd via rw recovery.I even tried twrp recovery but my phone was not being detected in my pc..I want to know why...Why I was not able to use MTP to transfer files to my phone... Luckily I had an escape route feom my demise and it was the Mi Flash tool...I locked my bootloader again and now I am too scared to mess with anything on my phone....
Well, all of this started when i tried to install the MIUI EU rom by TWRP, the surprise will come when the phone didn't boot. I've tried this on January of this year.
I tried everything, change port, motherboard flex, usb cable, another PC but no works.
Today i found a folder on /dev/usb-ffs/fastboot and it's empty but the adb folder (/dev/usb-ffs/adb) contains three files (ep0, ep1 and ep2). I'm not a programmer but maybe that fastboot folder would have that files.
Reading the default.prop i found the "Redmi K30s Ultra" name on ro.product.model
All of this make me think on the posibility of my phone will never be recovered, the phone only boot on fastboot and twrp but don´t detect the PC maybe for the files which is needed to boot or recognized is lost.
The TWRP version is ( 3.5.2_10 by Master and the phone gets the E:Unable to decrypt data error)
This rom (muiu 13) can only be installed via fastboot method. You can't use twrp or update method...
zopostyle said:
This rom (muiu 13) can only be installed via fastboot method. You can't use twrp or update method...
Click to expand...
Click to collapse
zopostyle said:
This rom (muiu 13) can only be installed via fastboot method. You can't use twrp or update method...
Click to expand...
Click to collapse
I was talking about the Miui 12.5 update but it's good to know it
ZeroNoTime said:
Well, all of this started when i tried to install the MIUI EU rom by TWRP, the surprise will come when the phone didn't boot. I've tried this on January of this year.
I tried everything, change port, motherboard flex, usb cable, another PC but no works.
Today i found a folder on /dev/usb-ffs/fastboot and it's empty but the adb folder (/dev/usb-ffs/adb) contains three files (ep0, ep1 and ep2). I'm not a programmer but maybe that fastboot folder would have that files.
Reading the default.prop i found the "Redmi K30s Ultra" name on ro.product.model
All of this make me think on the posibility of my phone will never be recovered, the phone only boot on fastboot and twrp but don´t detect the PC maybe for the files which is needed to boot or recognized is lost.
The TWRP version is ( 3.5.2_10 by Master and the phone gets the E:Unable to decrypt data error)
Click to expand...
Click to collapse
I don't think there are any issues with the hardware
1. Are you sure that you have installed the correct drivers for the device in windows?
2. Have you tried using a different PC? Alternatively try to use Linux
3. Have you tried adb sideload method from TWRP? eg) adb sideload rom.zip
4. Have you tried simply formatting data from TWRP before attempting to boot?
Dobsgw said:
I don't think there are any issues with the hardware
1. Are you sure that you have installed the correct drivers for the device in windows?
2. Have you tried using a different PC? Alternatively try to use Linux
3. Have you tried adb sideload method from TWRP? eg) adb sideload rom.zip
Click to expand...
Click to collapse
Yep, i tried everything but doesn't work
I only have access to twrp and fastboot but the usb connection doesn't work
Dobsgw said:
4. Have you tried simply formatting data from TWRP before attempting to boot?
Click to expand...
Click to collapse
Yep but shows the message e: Unable to decrypt FBE device