lenovo k3 note died - K3 Note Q&A, Help & Troubleshooting

Hello I wanted to upgrade the phone to the latest version vibeui 2.8 (2.5 my) just flashed it with flash quiver but it was rum Chinese would google play I decided to change it and I took off the needrom K50 -T5_USR_ST2511_5.444.1_1503111505-Lang-PK4 but instead I download only selected firmware upgrade telephone no longer includes not charging does not want to flash it gives brom error s_ft_da_no_response (4001) by plugging in the laptop detects it (media tek usb vcom android com6) but not charged. is there a way to fix?

Download the official stock ROM and flash using SPF tool.

freelancer81 said:
Download the official stock ROM and flash using SPF tool.
Click to expand...
Click to collapse
I tried but did not work

adp flashtool?

Download the rom from the index thread and use the version of SP Flash Tool that comes packed inside that rom archive. That will surely work.

I did it with the correct drivers and stock rom thanks to godji_1 big thanks

Related

[Q] [URGENT] help needed with flashing stock rom from lewa rom

I was currently having lewa rom in my galaxy ace.. I decided to flash stock rom again. I had the latest indian rom from samfirmware.. i selected ops file then one package. It installed fine to the point of downloading system.rfs butnow its stuck on system.rfs in odin.. What should i do now please help immediately.
i removed my phone... it can go into download ,ode but when i again tried to flash the firmware it was stuck on something called download mibib.. what should i do now
hellrider0411 said:
i removed my phone... it can go into download ,ode but when i again tried to flash the firmware it was stuck on something called download mibib.. what should i do now
Click to expand...
Click to collapse
Try flashing the multi package one from any stock firmware. Then flash the one package of the region you use.

I'm In A Bad Situation...

Hi guys,
So this morning I found that an AOSP-based Android 5.0 ROM was available for my S3 mini. I knew that this ROM would have several issues (no camera, GPS, 3G etc.) but I really didn't expect to get into the situation that I'm currently in...
Probably because of compatibility reasons, I can no longer access my recovery (TWRP v2.7.10). This means that I'd need to use Odin to flash a new ROM. However, when I connect my phone to the PC, it doesn't show up in Windows Explorer, and I get a message saying that the device malfunctioned, and that I should try reconnecting it (which, of course, I tried about 173 times).
So it seems that it is now impossible for me to install a new ROM.
Would any of you guys have the faintest idea of what I can do now?
Thanks
Extra Info: My phone's WiFi works, but since I don't have Gapps installed, I've only got the stock browser, which crashes about 3 seconds after I open it, so accessing the internet on my phone is practically impossible. I also don't have any file explorer installed, since I'm on completely stock Android and don't have Play Store access.
androidkitty4427 said:
Hi guys,
So this morning I found that an AOSP-based Android 5.0 ROM was available for my S3 mini. I knew that this ROM would have several issues (no camera, GPS, 3G etc.) but I really didn't expect to get into the situation that I'm currently in...
Probably because of compatibility reasons, I can no longer access my recovery (TWRP v2.7.10). This means that I'd need to use Odin to flash a new ROM. However, when I connect my phone to the PC, it doesn't show up in Windows Explorer, and I get a message saying that the device malfunctioned, and that I should try reconnecting it (which, of course, I tried about 173 times).
So it seems that it is now impossible for me to install a new ROM.
Would any of you guys have the faintest idea of what I can do now?
Thanks
Extra Info: My phone's WiFi works, but since I don't have Gapps installed, I've only got the stock browser, which crashes about 3 seconds after I open it, so accessing the internet on my phone is practically impossible. I also don't have any file explorer installed, since I'm on completely stock Android and don't have Play Store access.
Click to expand...
Click to collapse
Turn of your phone and enter Download Mode (Power+VolumeDown+Home) and flash the Odin Version of CM11 via ODIN. When it gets to the part when it autoreboots enter recovery(Power+VolumeUp+Home). Restore your backup or do whatever you need to do.
TheScriptKitty said:
Turn of your phone and enter Download Mode (Power+VolumeDown+Home) and flash the Odin Version of CM11 via ODIN. When it gets to the part when it autoreboots enter recovery(Power+VolumeUp+Home). Restore your backup or do whatever you need to do.
Click to expand...
Click to collapse
Can't do that since my PC doesn't recognise the phone
androidkitty4427 said:
Can't do that since my PC doesn't recognise the phone
Click to expand...
Click to collapse
What do you mean? Can Odin see it when its in download mode?
TheScriptKitty said:
What do you mean? Can Odin see it when its in download mode?
Click to expand...
Click to collapse
Nope.
Update: I used a different cable, and the phone is now recognised by Odin and ADB, but still not recognised by Windows Explorer. This is a huge relief, because at least now it's possible to install new ROMs. I'd still like to get Windows to recognise it though.
You don't need Windows Explorer to flash with odin
Gesendet von meinem GT-I8190 mit Tapatalk
mkruseonline said:
You don't need Windows Explorer to flash with odin
Gesendet von meinem GT-I8190 mit Tapatalk
Click to expand...
Click to collapse
True, but you can't use Odin to install zips.
androidkitty4427 said:
True, but you can't use Odin to install zips.
Click to expand...
Click to collapse
Well if Odin recognizes install the stock rom better grab it from sammobile or flash cm from novafusion.pl site in s3 mini downloads they offer odin versión too
STRATOS99KINGZ said:
Well if Odin recognizes install the stock rom better grab it from sammobile or flash cm from novafusion.pl site in s3 mini downloads they offer odin versión too
Click to expand...
Click to collapse
So I should be fine for installing new ROMS then. What about when Gapps is released for 5.0? Will I be able to convert that to an Odin package?
androidkitty4427 said:
So I should be fine for installing new ROMS then. What about when Gapps is released for 5.0? Will I be able to convert that to an Odin package?
Click to expand...
Click to collapse
flash a custom rom via odin, after that download the NovaFusion's TWRP Recovery v2.8.0.0 20140911 from here (download odin version) and flash it via odin.
After that you can flash GApps with TWRP - very simple
moonryder said:
flash a custom rom via odin, after that download the NovaFusion's TWRP Recovery v2.8.0.0 20140911 from here (download odin version) and flash it via odin.
After that you can flash GApps with TWRP - very simple
Click to expand...
Click to collapse
Small problem: Recovery mode has been inaccessible since installing 5.0.
androidkitty4427 said:
Small problem: Recovery mode has been inaccessible since installing 5.0.
Click to expand...
Click to collapse
ok then you must go the "hard way":
Download the rom "I8190 серв. укр.rar" from here.
Unpack .rar and open Odin.
Select the goldenxx.pit to [PIT]
CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md 5 to [PDA]
CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_lo w_ship.tar.md5 to [CSC]
Put your phone in download-mode and connect it to computer.
Hit [Start] when device is detected by Odin.
You will end up with a "La'Fleur" branded phone, but no worries!
Just go to download mode again and flash your choice of firmware and the custom recovery as well.
The three button combo will still work!
And one tipp at last: forget lollipop until it is stable and for daily use ...

[ROM]Samsung Galaxy Grand Prime 4G(SM-531F)Android5.1.1 APA1 simplified ROOT

This rom is for Samsung Galaxy Grand Prime 4G(SM-531F) and is suitable for this device with baseband version G531FDDU1APA1. If your device's baseband version doesn't match, please think twice befor flashing this rom for this may lead to WIFI problems.
This rom is made from the files that backed up from my device.
Stock, a few of google apps deleted.
ROOT, SuperSU2.16
Suitable for device with baseband version G531FDDU1APA1
To flash this rom, the twrp recovery is needed, the download link is below. You may need odin tool to flash it.
May be you could use this tool to flash this rom automatically. This tool will download the recovery,rom and flash it automatically for you if the network is reachalbe.
TWRP recovery download: http://pan.baidu.com/s/1gfdMwYR
ROM Download: http://pan.baidu.com/s/1bp5ETyR
Won't work with SM-G530t1?
redeyezzjay4148 said:
Won't work with SM-G530t1?
Click to expand...
Click to collapse
I don't have the device SM-G530t for testing. And I don't suggest flash this rom to device SM-G530t. For the baseband version does not match may lead to wifi can't be opened problem.
HansonZhang said:
This rom is for Samsung Galaxy Grand Prime 4G(SM-531F) and is suitable for this device with baseband version G531FDDU1APA1. If your device's baseband version doesn't match, please think twice befor flashing this rom for this may lead to WIFI problems.
This rom is made from the files that backed up from my device.
Stock, a few of google apps deleted.
ROOT, SuperSU2.16
Suitable for device with baseband version G531FDDU1APA1
To flash this rom, the twrp recovery is needed, the download link is below. You may need odin tool to flash it.
May be you could use this tool to flash this rom automatically. This tool will download the recovery,rom and flash it automatically for you if the network is reachalbe.
TWRP recovery download: http://pan.baidu.com/s/1gfdMwYR
ROM Download: http://pan.baidu.com/s/1bp5ETyR
Click to expand...
Click to collapse
Now there is a convenient tool to flash this rom. You can download it from here
This tool will do every procedure for you, including download compatiable recovery, flash recovery, flash rom. All you need to to is just install this tool and then connect your phone to this tool and choose the rom you like. Then this tool will download the rom and flash it automatically for you. May be you will like it!
Guys any custom rom for samsung galaxy grand prime sm g531f??
PLease quote the links need it very eagerly
thanks in advance
Its directing to an apk link. Which is completely in chinese.
I am not able to download the rom. Please guide me.
Hello,
Would be possible to have the files in a different server? Like Mega for instance?
I´m trying to download the binaries but they are too slow and after a while the connection fails.
I would be so glad.
Thanks in advance

Issues flashing roms:(

HI!
I have a BIG issue...... i coud not flash ANY custom rom via TWRP..... only original firmware by Odin,
my phone is on EPG2 now but before in 5.1.1 LP, i did downgraded my device by flashing LP BL and modem via Odin before then flash a LP original firmware. I upgraded via ODIN to EPG2 (now again) and could not flash custom roms in EPG2. i tried via Kies and same too.... i wait to finish the kies procedure to done and when flash TWRP (3020) and intend to flash any rom.......said corrupt file again:crying: I don know what i need to do. Maybe need flash a .pit file? or change the TWRP?
any sugest????? help!
Hey there, I ran into a similar problem and my problem was the reactivation lock under settings, security, I had it turned on. I'm not sure about your case but if you do have it on.....turn it off. Good luck.
Sent from my SM-N915T using XDA-Developers mobile app
wilsonmd said:
HI!
I have a BIG issue...... i coud not flash ANY custom rom via TWRP..... only original firmware by Odin,
my phone is on EPG2 now but before in 5.1.1 LP, i did downgraded my device by flashing LP BL and modem via Odin before then flash a LP original firmware. I upgraded via ODIN to EPG2 (now again) and could not flash custom roms in EPG2. i tried via Kies and same too.... i wait to finish the kies procedure to done and when flash TWRP (3020) and intend to flash any rom.......said corrupt file again:crying: I don know what i need to do. Maybe need flash a .pit file? or change the TWRP?
any sugest????? help!
Click to expand...
Click to collapse
Try to download rom files again and flash latest version of twrp and turn off reactivation lock.
Trex888 said:
Try to download rom files again and flash latest version of twrp and turn off reactivation lock.
Click to expand...
Click to collapse
I did it everithing........activation lock off, twrp last version, and unknow source checked too! I downloaded the same file 4, 5 times....

Updating to One UI 2.0 from PIE AOSP ROM

Curently I'm using the LOS 17 rom, and I wonder if anyone can show me the way to install the one UI 2.0? thanks
B1nz said:
Curently I'm using the LOS 17 rom, and I wonder if anyone can show me the way to install the one UI 2.0? thanks
Click to expand...
Click to collapse
There are two ways.
1. Install an official Samsung rom
Note that in the official rom you can't hide your Knox status, so you won't ever be able to use e.g. Samsung Health
- Download the stock firmware for your country from Sammobile
- Install Odin (there are official download links here on XDA, just search for it)
- Unzip the downloaded rom
- Open Odin, connect your device in download mode and place the unzipped files in the right slots (use CSC instead of HOME_CSC in the CSC slot to reset your phone, it's safer)
- Flash
2. Install a custom rom based on stock
- Clean flash a rom like the one of AlexisXDA in TWRP, you probably know how it works

Categories

Resources