UPDATE 05/01/2016
Ok another update, havent managed to fix usb forced charge or otg yet but am looking at those, this build has got some interesting features though
Code:
Sound Control Mod to improve sound quality
Init.d Support
ZRAM Enabled, use one of te many apps in play store to activate it.
---------------------------------------------------------------------------------------------------------------------------------------------
MINOR UPDATE 04/01/2016
Only a small bugfix release, trying to fix usb force charge and fix a broken wifi. new build is up now at links below
TW Kernel
CM Kernel
-----------------------------------------------------------------------------------
UPDATE 03/01/2016
Yet another Update folks, this one is small and only adds a couple of things
Code:
Add USB Forced Fast Charging support (google for info)
Add a Build that works on Cyanogenmod also
for each version released (from 1.3) their will be 2 seperate zip files, one will have TW in the name and one will have CM
the TW Version WILL ONLY work on touchwiz roms
and the CM version will work on Cyanogenmod based roms
have tested on CM 12.1 and it works and seems to fix a few bugs aswell apprently
nice short one for today
any questions or requests are welcome and feel free to let others know about these kernels
zips are in the download section or available here :
TW 1.3 Build:
CM 1.3 Build:
--------------------
UPDATE 02/01/2016
New update Released today folks.
new features added
Code:
600mhz GPU Overclock
New I/O Schedulers added
New CPU Governors added
Added a few Different Hotplug drivers to hopefully aid Battery life
Entire kernel is built using the Hyper-Linaro 5.1.1 Toolchain with -O3 and graphite enabled for extra performance and general smoothness
Bit More coding has been worked on for OTG support but this is not working yet if anyone has any ideas or can help with OTG support please contact me as i am a bit stumped on this at moment
download zip file in the downloads tab or from :
currently 1.8ghz seems to be the highest Overclock possible on the cpu as anything more than that fails to boot. still looking into it
any questions or suggestions are welcome
donations are much appreciated also
--------------------------------------------------------
Hello All, and welcome to 2016
got a nice new update for the snapdragon variants of the S5 Mini (g800h/ds/hq etc) and this kernel is as far as im aware quite unique across any device using the msm822x cpu. so you are all going to be part of a very special group for trying this one, that group is going to be the serious overclock group, this kernel overclocks not to 1.6ghz, not to 1.7 ghz but all the way to 1.8 ghz currently, and unless someone can let me know otherwise this is the fastest speed i have seen from a msm8226/8 based device. even the 2nd generation moto g only has a 1.6ghz clock.
changelog overall for this kernel from stock is :
Code:
Boosted Notification LED Brightness as default is quite dim apprently
Added UKSM(Ultra-Kernel Samepage merging) for performance and memory management
added interactive cpu governor
Enabled Fading LED Notification Light
Removed pretty much all debugging junk from kernel as its not needed
switched to linaro 4.9.4 compile with cortex a7 optimization
[strong]1.8Ghz CPU Overclock[strong]
550mhz GPU Overclock
100mhz Base GPU Clock (battery saving FTW)
zzmoove CPU governor
Few different I/O governors including FIOPS and BFQ
SU supported and have disabled samsungs stupid rooting protection
thanks again to sasukesama for testing this one, and again risking his device for it.
check the downloads tab for the files, i have created an update zip aswell as the standard img file and replacement wlan.ko for those who want to do them manually, i HAVE NOT created an odin file for this.
please remember to backup before flashing and i can not promise it will work on your device due to the silicon lottery when it comes to cpus etc.
any questions please feel free to ask
THIS WILL WORK ON TOUCHWIZ 5.1.1 ONLY AT THE MOMENT
XDA:DevDB Information
TardisKernel 1.5, Kernel for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve, sasukesama
Source Code: https://github.com/DJSteve/g800h_custom_kernel
Kernel Special Features: Major CPU overclock, performance and powersaving tweaks
Version Information
Status: Testing
Created 2016-01-01
Last Updated 2016-11-20
Download link
luki2411 said:
Download link
Click to expand...
Click to collapse
Up in the download tap
have also added link to the zip file on my dropbox to the first post
1.8.. just wow. i'll make a backup and try this
can you make 600~mhz gpu o/c ?
edit// found some -things- in build.prop
mpq.audio.decode=true
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.sony.walkman.logger=1
persist.service.walkman.enable=1
ro.somc.clearphase.supported=true
persist.service.clearphase.enable=1
setprop htc.audio.global.state=0
htc.audio.lpa.a2dp=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.enable_dmic=1
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
ro.ril.enable.amr.wideband=1
ro.config.hw_dolby=true
lpa.releaselock=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
dolby.stereospeaker=true
dolby.flag=true
Click to expand...
Click to collapse
I havent looked at gpu oc yet theirs a few things gpu related i want to check out anyway so its next on list
Sent from my SM-G800F using Tapatalk
Ahmetay said:
1.8.. just wow. i'll make a backup and try this
can you make 600~mhz gpu o/c ?
edit// found some -things- in build.prop
Click to expand...
Click to collapse
Because my build.prop is in the zip :v he used it to disable secure storage
and my build.prop isnt stock
ive add those linse to use dsp + and dolby atom to increase the sound so dont mind :v nothing bad
sasukesama said:
Because my build.prop is in the zip :v he used it to disable secure storage
and my build.prop isnt stock
ive add those linse to use dsp + and dolby atom to increase the sound so dont mind :v nothing bad
Click to expand...
Click to collapse
i've edited it before flashing, but didn't deleted them..
i tried to use them but it didn't work, what did you use? can you send a link? i have a audiotechnica cks-77x, need to use it with full potential
so ill assume people are having success with this update
Ahmetay said:
i've edited it before flashing, but didn't deleted them..
i tried to use them but it didn't work, what did you use? can you send a link? i have a audiotechnica cks-77x, need to use it with full potential
Click to expand...
Click to collapse
antutu score:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bonus//
when i insert a usb-otg flash memory
and when i just.. wait.
Ahmetay said:
antutu score:
bonus//
when i insert a usb-otg flash memory
and when i just.. wait.
Click to expand...
Click to collapse
Ive used the barebone cleaner
it has some mods to install including the audio boost
new build is now up folks, see first post for changelog and download links
DJ_Steve said:
new build is now up folks, see first post for changelog and download links
Click to expand...
Click to collapse
Thanks its so smoth
luki2411 said:
Thanks its so smoth
Click to expand...
Click to collapse
Great to hear its an actual noticable improvment in smoothness
Sent from my SM-G800F using Tapatalk
Yes it is its fast like newer befor thanks
luki2411 said:
Yes it is its fast like newer befor thanks
Click to expand...
Click to collapse
Your most welcome
i would be interested to know how the battery life has changed with all the tweaks
Sent from my SM-G800F using Tapatalk
It's possible to implement a charger current control?
Vithalvess said:
It's possible to implement a charger current control?
Click to expand...
Click to collapse
I can certainly take a look at adding that
Sent from my SM-G800F using Tapatalk
Does this work on CyanogenMod for g800h ?
Its touchwiz only currently. Suppose ill have to make a version for cm at some point(i actually prefer stock over any form of cm. Cm is too bloated imo now
Sent from my SM-G800F using Tapatalk
Related
brisK Kernel
brisK is a KitKat kernel for stock-based ROMs for the Samsung Galaxy S4 mini LTE (GT-I9195).
It aims to be faster and more a bit more battery-friendly than the stock kernel, while retaining its stability.
To prevent bloat I will only apply useful features like BLN. Adding 10 random governors and schedulers is not useful in my eyes, and is also not the goal of this kernel.
Goals
Stability: The original Samsung kernel is stable, so let's not go too far away from it. This kernel doesn't need bleeding edge code - it just works(TM).
Efficiency: Less power consumption by faster computation.
Battery: A battery drain patch is included, which is not in Samsungs original code.
Speed: Minor changes, for example: Trade some screen smoothness for less kernel overhead. Should not be noticeable, though. Also lowers power consumption slightly.
Changelog
v6 (brisk_kk-stock_2015-07-28_15-07-08_64d9234.zip)
Removed more KNOX stuff (--> This fixed some random reboots!)
Finally upgraded to new toolchain: Linaro GCC 4.9.4-2015.06 (Cortex-A15)
Thanks @impactor and @SilviuMik for providing help!
v5
Revert default IO scheduler back to CFQ
Apply changes from new released kernel source (GT-I9195_EUR_KK_Opensource.zip - I9195XXUCOA2)
Apply changes from new released kernel source (GT-I9195_EUR_KK_Opensource.zip - I9195XXUCOE4)
Older versions
v4
Fixed USB-to-PC problems by re-enabling some debugging code
v3
Users reported: USB-to-PC (MTP) doesn't work? (Logfiles appreciated)
Apply changes from Samsungs GT-I9195_EUR_KK_Opensource_Update1.zip
Replace stock Wlan module with kk_2.7_rb1.43
Various kernel config changes:
Disable various unused and debugging features
Re-enable heap randomization
Enable "Optimize very unlikely/likely branches"
Set default IO scheduler to noop
Reduce preemption from "Low-latency desktop" to "Desktop"
Disable Samsungs Rooting Restriction
Added init.d support
v2
Added OTG support (UNTESTED) - Edit: NOT WORKING YET
Removed TIMA
Change to XZ compression
Add BLN support (UNTESTED) - Edit: NOT WORKING YET
v1
Added battery drain patches
Optimize kernel for speed, not size
Preparation for init.d support
Permissive SELinux
Future plans
Add proper Prima WLAN driver - Done!
Add a few more optimizations - Done!
Add init.d - Done!
JellyBean Kernel
The old JellyBean kernel is no longer maintained, but it is stable and its uptime was above 2000 hours on my device. I published it here too, in case someone is happy with their JellyBean ROM and wants this.
Features: BLN, Battery drain patches, kernel config optimized, most debugging code deactivated
Source: https://github.com/TheBootloader/android_kernel_samsung_msm8930-common/tree/jb-stock
Awesome people
@SilviuMik for helping me getting started and providing useful tips - You rock!
@Christopher83 for his toolchains
@F4k for providing source code where I can snoop around
@junkyde for his kernel and his OTG and BLN patches
@arco68 for being another great resource
Downloads & Sources
Source code is on my GitHub.
Releases are at the bottom of this post and on GitHub.
See 2nd post if you need checksums.
PLEASE MAKE FULL BACKUP (/system TOO!) BEFORE FLASHING ANYTHING. The strangest things can happen if you don't have a backup - even if it *should* work.
Downloads are ordered from oldest to newest, so the newest release is at the bottom.
Checksums
brisK JB (brisk_jb_2014-05-16_16-40-39.zip)
MD5: 0f916929e85ae1f8d7b2d1aa8c4e5e1f
SHA256: 8cb1b01358eeb6bc7fb68bbb2fd641d5cda852b78d7e22605ffb28eba6da4156
brisK KK v1 (brisk_kk_2014-08-19_17-33-50_cd36751.zip)
MD5: 8edf28d8a2d1d89d40f8a8f1863d7b57
SHA256: aed1caf0d13ada04888e7c3a020fa6b679fc0fc36ad89678e617ae9a36d637e6
brisK KK v2 (brisk_kk-stock_2014-08-21_01-04-03_765f3f6.zip)
MD5: c004e49779f21f706e76a00233f8fb80
SHA256: df57729a66d425a970d8c8ef222edf6073e4cfc562d8dccea96f12ac0eac7aef
brisK KK v3 (brisk_kk-stock_2014-12-07_00-57-00_23da34c.zip)
MD5: d64b2c7049339eaed9d14bafdc8a9ee3
SHA256: 47741a492077d3e385e120c3596bf6df63426930fffcaa7aa84c924ff43fee91
brisK KK v4 (brisk_kk-stock_2014-12-07_15-31-03_1091455.zip)
MD5: d5fb48434fe9a206a9544968081ee654
SHA256: 122189fb11068be07e6d24cbe179ed57a9872944664e028d0d288fcf804ea4d2
brisK KK v5 (brisk_kk-stock_2015-07-23_23-57-24_518a15c.zip)
MD5: 2a5086c1354e6f475d73b77b41bcfe40
SHA256: 7dce6a173c9e6ddf6f573c802cc8aea7900239a2253ca31722e651e791bb6e6e
brisK KK v6 (brisk_kk-stock_2015-07-28_15-07-08_64d9234.zip)
MD5: 567d7e6ea8762559d218bb092c4cdac4
SHA256: b5b3b41fa7ed10210e4964fa2cd98d14d4572a30b68f7b939e945a3458063a43
Samsungs stock JellyBean Kernel (samsung_jb.zip)
Description: Reverts all changes made by brisK JB by overwriting it with Samsungs original JB kernel (extracted from I9195XXUBML4).
MD5: 388336cec2e9686e258985d0dded0dc9
SHA256: 35777926edee3558208175d5359ef1c466dc3d4dbb1276e233f6727d64b83aa3
Samsungs stock KitKat Kernel (samsung_kk2.zip)
Description: Reverts all changes made by brisK KK by overwriting it with Samsungs original KK kernel and files (extracted from I9195XXUCNE6).
MD5: c71112214620a50841731f4899dd2ca2
SHA256: d2d70f212ee898cf1cedef2d84b3e6345e2388a13579a7112181a254a2c2f3de
Installing
To flash any of these zip-files, you need to install a custom recovery on your phone. (For example: http://forum.xda-developers.com/showthread.php?t=2364980 )
Put zip file on your phone or on its microSD
Boot into recovery: Hold "Volume UP", "Home Button", and "Power Button" when it is off or rebooting
MAKE A FULL BACKUP BY USING THE BACKUP-MENU
Select "Install from zip" or something similar
Navigate to your zip file, select it, and flash it
Reboot your phone
Uninstalling
If you want to go back to Samsungs stock kernel or flash another kernel, you need to install "samsung_jb.zip" or "samsung_kk.zip" first.
brisK uses custom kernel modules. When you run on brisK and then directly install another custom kernel which has no custom modules, you will probably experience issues with WLAN and other stuff. To solve this, flash "samsung_jb.zip" or "samsung_kk.zip" (which flashes the stock modules), and THEN flash whatever custom kernel you want. - Of course you do NOT need to do this if you update to a newer version of brisK.
thank !
GREAT !!!
but for governors and schedulers , i agree with you in half ... but "few" of them are very useful !
what do you think about the recent "zen" ...or "row" ( by default in all customs like cyanogenmod ) ?
for you ,what are the "best" (more adapted ) for better compromise in performance/baterry save ?
why you don't add just 1 or 2 among the best of ones ?
Now running on brisK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Loulou-13 said:
but for governors and schedulers , i agree with you in half ... but "few" of them are very useful !
Click to expand...
Click to collapse
I agree that some governors might actually improve performance, but there isn't much information available, some people say governor A is better, some say B is best...
But also: Kernel goal nr. 1 is stability, and ondemand is well tested. That's why I probably won't add any new governor before testing them a lot.
Can you suggest any governors? And do you have proof or URLs why they are better? Thanks!
If you want more features, more governors, etc, f4k will probably release a stock kernel soon. So keep an eye out for that!
Loulou-13 said:
what do you think about the recent "zen" ...or "row" ( by default in all customs like cyanogenmod ) ?
for you ,what are the "best" (more adapted ) for better compromise in performance/baterry save ?
why you don't add just 1 or 2 among the best of ones ?
Click to expand...
Click to collapse
Zen: I don't know what this does different than other schedulers, I have to read about this first.
I considered "row" when I had an Evo 3D, but I didn't notice a difference between "noop" and "row" in normal daily usage, so I'm not sure yet if I will include it or not - needs more testing.
ladislav.heller said:
Now running on brisK
Click to expand...
Click to collapse
Awesome!
If you have any problems, please report them here. And if you don't have any problems at all, please report that here too!
TheBootloader said:
I agree that some governors might actually improve performance, but there isn't much information available, some people governor A is better, some say B is best...
But also: Kernel goal nr. 1 is stability, and ondemand is well tested. That's why I probably won't add any new governor before testing them a lot.
Can you suggest any governors? And do you have proof or URLs why they are better? Thank!
If you want more features, more governors, etc, f4k will probably release a stock kernel soon. So keep an eye out for that!
Zen: I don't know what this does different than other schedulers, I have to read about this first.
I considered "row" when I had an Evo 3D, but I didn't notice a difference between "noop" and "row" in normal daily usage, so I'm not sure yet if I will include it or not - needs more testing.
Click to expand...
Click to collapse
Same thinking as me ...
ondemand for CPU Gov / No-op for I/O sched , they work great and don`t cause problems
SilviuMik said:
Same thinking as me ...
ondemand for CPU Gov / No-op for I/O sched , they work great and don`t cause problems
Click to expand...
Click to collapse
Yes, my experience too!
Although, when I copy big files with "noop", android freezes for the duration of the copy process. That's the nature of "noop", but "row" might actually fix that. But then again: I rarely need to copy big files, so "noop" is okay for now.
TheBootloader said:
Awesome!
If you have any problems, please report them here. And if you don't have any problems at all, please report that here too!
Click to expand...
Click to collapse
No problems, everything works well.
Please add support for USB Host with additional power supply, is very necessary !!!!
killov1982 said:
Please add support for USB Host with additional power supply, is very necessary !!!!
Click to expand...
Click to collapse
+1 for USB OTG support.
Working good so far
Thanks
TheBootloader said:
Yes, my experience too!
Although, when I copy big files with "noop", android freezes for the duration of the copy process. That's the nature of "noop", but "row" might actually fix that. But then again: I rarely need to copy big files, so "noop" is okay for now.
Click to expand...
Click to collapse
NOOP hangs in general when the read/write task becomes too intensive. Consider CFQ if you're going to do a bit write operation, else ROW is better. That my two cent when I tried on my S3 with Boffela kernel.
PS. ZEN hangs even worse than NOOP.
ladislav.heller said:
+1 for USB OTG support.
Click to expand...
Click to collapse
I second that
thank for your work...
is your kernel working with old knox-free bootloaders like Silviumik's kernel?
thanks
battery life compared with carbon 4.4.4 ? PLEASE
s.goten said:
thank for your work...
is your kernel working with old knox-free bootloaders like Silviumik's kernel?
thanks
Click to expand...
Click to collapse
For now i think no, because he did not remove Knox reference from source, i could be wrong tho !
I just released a new version!
A lot people asked for OTG, so here you go! I added OTG and BLN (untested!!!), thanks to junkyDE!
The highest kernel goal is stability, but I don't have time to test these features right now - maybe I can do one quick emergency fix tomorrow if something breaks, but after that I will probably not respond for 2 weeks or more.
So, have fun and enjoy!
brisK v2
Added OTG support (UNTESTED)
Removed TIMA
Change to XZ compression
Add BLN support (UNTESTED)
-----
s.goten said:
thank for your work... is your kernel working with old knox-free bootloaders like Silviumik's kernel?
Click to expand...
Click to collapse
SilviuMik said:
For now i think no, because he did not remove Knox reference from source, i could be wrong tho !
Click to expand...
Click to collapse
I removed TIMA in brisK v2, so.... it -should- work now right?
If it doesn't boot, just restore your boot partition from a backup or re-flash your previous kernel if you had any.
-----
TNCS said:
NOOP hangs in general when the read/write task becomes too intensive. Consider CFQ if you're going to do a bit write operation, else ROW is better. That my two cent when I tried on my S3 with Boffela kernel. PS. ZEN hangs even worse than NOOP.
Click to expand...
Click to collapse
Thanks a lot for your input! Now I know I don't need to consider ZEN, and will stay with NOOP, and aim for ROW when I have time to add it.
I9192?
Sent from my GT-I9192 using XDA Premium 4 mobile app
SilviuMik made a 9192 kernel:
http://forum.xda-developers.com/showthread.php?t=2592308
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
- Compiled with Linaro GCC 4.9-2015.03 thanks to christopher83
-frandom support
-Added optimized ARM RWSEM algorithm
-zram bringup
-added input touch boost from franco
-added cpu-boost
-added smartassv2 governer[more will may or may not be added]
-selinux fixes
-fixed memory leak on some places
-speed up FITRIM((more info)
-entropy tweaks
-varies optimizations for speed and stability
-using lz4 compression and decompression
-check my commits here
-using any kernel installer by kaush so compatible with all lollipop roms
CHANGELOG
-monster r1 bringup
DOWNLOAD
click here
INSTRUCTIONS
To install this KERNEL you will need to have a latest custom Recovery such as TWRP 2.8.6.0 or PhilZ installed
Copy the downloaded KERNEL.zip to your phone.
Boot into your recovery
FLASH THE KERNEL
XDA:DevDB Information
monster kernel, Kernel for the Samsung Galaxy Grand Duos i9082
Contributors
coderdroid
Source Code: https://github.com/rishi1998/android_kernel_samsung_i9082
Kernel Special Features:
Version Information
Status: Stable
Created 2015-07-06
Last Updated 2015-07-31
Q: Will you add feature "X" to your kernel?
A: There is one chance that I add it to my kernel. simply post this question in the thread and if I find it usefull, I will implement it. Otherwise not.
Q: What are the best settings for a balanced using between battery saving and performance?
A: This settings are already the default ones. Because this default values are my personal settings, so this will be the best balance between power and battery .
Q: When is the next update coming?
A: As soon as possible. I am working really hard on bringing you a good update. That means also I have to test everything etc. I wont deliver you updates with big bugs! I better take my time and make everything working
mine
mine again
what are you looking at??
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Can I flash it on RR ROM?
Can I flash it on RR ROM?
FINALLY A KERNEL FOR OUR GRAND !
I'll download , test and will report after couple of hours
Thanks
---------- Post added at 07:35 AM ---------- Previous post was at 07:34 AM ----------
hemant4409 said:
Can I flash it on RR ROM?
Click to expand...
Click to collapse
Yes
compatible with all lollipop roms
Click to expand...
Click to collapse
thnQ bro and we will try it but i have a question i have RR and if the kernel is not completely with rom or i didn't like it how i can back to previous one that is included with rom !
and its better than the included with the rom ?
sry about my bad english :'(
Smooth ( using smartassV2 ) but doesn't have too much customization options
I mean Only 6 governor ( smartassV2 , performance , interactive , conservation , ondemand , powersave )
Overclocking limited to 1300
No new I/O Schedulers ( cqf , noop , row , deadline )
advantages: Z-RAM , UKMS
What suggested configuration?
Akash M. said:
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Click to expand...
Click to collapse
+1
Yousef Mohamed said:
Smooth ( using smartassV2 ) but doesn't have too much customization options
I mean Only 6 governor ( smartassV2 , performance , interactive , conservation , ondemand , powersave )
Overclocking limited to 1300
No new I/O Schedulers ( cqf , noop , row , deadline )
advantages: Z-RAM , UKMS
Click to expand...
Click to collapse
use kernel adiutor app to control the kernel
i will not going to add all that fancy stuff which might break the kernel in my stable releases(why anyone would use my kernel if it breaks things ) i have added the most stable stuff in this and for governers take this example i will add 15 to 16 goverers some is causing random reboots ,some heating up the device and some just behaves strangely so will you use my kernel for that? i am not saying i am not going to add the features,i am just saying i will add the feature which i think would be stable but still if you want that stuff i will make some experimental builds
Akash M. said:
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Click to expand...
Click to collapse
this thing breaks the kernel and cannot be called stable but still for you guys as you don't have this feature i will try to bring this to you (no promises as i don't know how it goes)
hemant4409 said:
Can I flash it on RR ROM?
Click to expand...
Click to collapse
yes
an0x said:
thnQ bro and we will try it but i have a question i have RR and if the kernel is not completely with rom or i didn't like it how i can back to previous one that is included with rom !
and its better than the included with the rom ?
sry about my bad english :'(
Click to expand...
Click to collapse
dirty flash the rom again
Please add swap ram support and GPU tweak
@coderdroid
Quick personal opinion, is it better to have standard CPU steps (350-600-800-1200...) or will it be an advantage to have more steps (300-400-500-600...), and how about under clocking, is it possible for our device? As I can't find any kernel did it,yet. Also the GPU tweaking, seems like mostly non doable on our device?
BTW, am dloading your kernel,will report if none did yet(any bugs or anything).
Osm kernel plz add swap support too
Sent from my GT-I9082 using XDA Forums PRO
HOW TO ?
hI,
Please help me I didn't find setting in CM 12.1 , please let me known where to find the kernal settings
Thanks in advance
Elvis
evilrulez said:
hI,
Please help me I didn't find setting in CM 12.1 , please let me known where to find the kernal settings
Thanks in advance
Elvis
Click to expand...
Click to collapse
Install Kernel Auditor app form the Play store
thanks
Yousef Mohamed said:
Install Kernel Auditor app form the Play store
Click to expand...
Click to collapse
thank you very much
Awesome and fastest kernel ever
coderdroid said:
this thing breaks the kernel and cannot be called stable but still for you guys as you don't have this feature i will try to bring this to you (no promises as i don't know how it goes)
Click to expand...
Click to collapse
Thnxx bro..and your kernel is too good...best kernel ever...and this enough for me that you will work on #DoubleTap2WakeUp:angel:...keep working for our grand... and now I'm really feel lucky that I'm having galaxy grand duos:fingers-crossed:
Hello all together, this is HydraKernel for Note 7 roms on the S7 Edge!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports Note 7 based roms form BPI4 and higher
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
If you want to take my work and need it somewhere, or do other things with it, ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
I release 2 different kernel versions here. One is for sony sensors, since they never have a problem, go for the *Mode* version, you got all working modes there but on sammy sensor you got washed out colors. So I made a second zip which has *Quality* in name, which has stock quality BUT not all camera modes are working. This works on: HydraRom, Sacs Rom, Renovate, everything else needs to be tested
Features of this Kernel:
- Build with latest sabermod Toolchain 7.0
- Build with BPI7 kernel source!
- F2FS compatible
- Choose kernel between quality or modes
- Latest Linux version 3.18.42, is always up to date
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative
- Built with latest ramdisk sources from samsung (BPH7)
- I/O schedulers: CFQ (Default), ROW, No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, and SIOplus
- Fixed power efficient wq permission
- Critical TCP bug fixed
- Thermal drivers updated
- Selinux updates merged by google
- Zram LZ4 enabled
- Allow ADB-Insecure
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- SeLinux is set to permissive
- All samsung related configs disabled (as knox, tima, restrict rooting)
- force encryption by samsung disabled!
Download:
V1.3 available on AndroidFilehost
Bugs/Problems:
- Camera with washed out colors or with not working modes (depends on your choice)
Instructions:
0. Make a full backup of your phone just in case!
1. Install a custom recovery for your phone, like this one here: TWRP
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your phone
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Now, flash your kernel you put onto the phone
6. Flash supersu, phh's root or xposed, just all things that modify your boot.img
7. Wipe cache and dalvik cache (recommand)
8. Reboot
If you wanna join the beta tester group, download yourself telegram and click on the chat link: Telegram Group
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
PayPal
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- arter97
- Jesec for initial fingerprint patch method on s7
- dorimanx
- AndreiLux
- halaskz
- neobuddy83
XDA:DevDB Information
HydraKernel for hero2lte, Kernel for the Samsung Galaxy S7 Edge
Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/HydraKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.3
Stable Release Date: 2016-10-07
Created 2016-10-07
Last Updated 2016-10-20
Reserved
Reserved
Nice work bro :good: another addition to your list
running it on renovate rom, smooth and slick.
comera still sucks with samsung sensor.
tnx dev!!!
Game0vr said:
Nice work bro :good: another addition to your list
Click to expand...
Click to collapse
Thank you!
weedeater84 said:
running it on renovate rom, smooth and slick.
comera still sucks with samsung sensor.
tnx dev!!!
Click to expand...
Click to collapse
Thanks
You have chosen quality camera zip?
Tkkg1994 said:
Thank you!
Thanks
You have chosen quality camera zip?
Click to expand...
Click to collapse
i'm using flat, didnt see quality zip for 930, only 935
Here is a sample pic of the difference from stock Samsung camera quality to Luca's Hydra kernel quality zip
The top pic is Luca's fix and bottom stock Samsung
weedeater84 said:
i'm using flat, didnt see quality zip for 930, only 935
Click to expand...
Click to collapse
Why do you post in the edge thread instead of the flat one? Sure I don't have them here for s7
Game0vr said:
Here is a sample pic of the difference from stock Samsung camera quality to Luca's Hydra kernel quality zip
The top pic is Luca's fix and bottom stock Samsung
View attachment 3896921
Click to expand...
Click to collapse
Yeah it works pretty well
Small question, which cpu Governo do you think goes for the best battery saving in your kernel? (dont care about gaming)
However, Appreciate your great work! Thanks dear!
yamensati said:
Small question, which cpu Governo do you think goes for the best battery saving in your kernel? (dont care about gaming)
However, Appreciate your great work! Thanks dear!
Click to expand...
Click to collapse
Default one, interactive
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Default one, interactive
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
:good: thanks
One problem in quality kernel lagging in camera when taking picture. Is it possible to solve the problem.
saxena1 said:
One problem in quality kernel lagging in camera when taking picture. Is it possible to solve the problem.
Click to expand...
Click to collapse
Using s7 camera
Sent from my SuperMan powered SM-G930F
i have n issue since flashing last nite my phone has had 3 or 4 random reboots any idea why??
ruudbwoi said:
i have n issue since flashing last nite my phone has had 3 or 4 random reboots any idea why??
Click to expand...
Click to collapse
Which rom?
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Which rom?
Click to expand...
Click to collapse
jesec rom im now back using prometheus kernel which is i like it but i do prefer hydra kernel its snappier
ruudbwoi said:
jesec rom im now back using prometheus kernel which is i like it but i do prefer hydra kernel its snappier
Click to expand...
Click to collapse
Only confirmed working on, sac, renovate and hydra
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Only confirmed working on, sac, renovate and hydra
Click to expand...
Click to collapse
ah well that be why then lol shame i did like the kernel
can i use this ROM for snapdragon chip
This kernel is made based on @bauner's CM 12.1 NightOwl ROM, LineageOS 13 with a few changes,. Originally based on my preference in what features I want added, I thought the rest of the Note 1 users might benefit from a bit more variety on his projects.
Just flash the kernel and you're done, make sure you're on the latest ROMs by bauner. As always, I'm not responsible if you brick your device due to some freak accident.
What's new:
V3
Merged kernel patches from bauner's commits
Redo some optimisation flags
V2
Did some optimisations
Tweak Interactive codes
Fix possible memory leaks
Please refer to my commits for more detailed info
V1.5
Set Westwood as TCP default
V1
Set Interactive as the default governor
Undervolt by 50mV
13-step CPU frequency
Download links:
CM 12.1
LineageOS 13
I did not test LineageOS 13, so please have a copy of the original NightOwl kernel on standby before flashing.
Credits:
bauner for his amazing work with the Note 1
Christopher83 for those toolchains
GeeckoDev for the War Kernel r3 sources
XDA:DevDB Information
Manjuu Kernel for CM 12.1 / LineageOS 13, Kernel for the Samsung Galaxy Note GT-N7000
Contributors
AutumQueen92
Source Code: https://github.com/AngryManjuu/android_kernel_samsung_tw_n7000/tree/cm-12.1
Kernel Special Features: Compiled with GCC toolchain optimised for our CPU (ARMv7 Cortex-A9)
Version Information
Status: Stable
Current Stable Version: V3
Stable Release Date: 2017-03-17
Created 2017-02-15
Last Updated 2017-03-21
Some kernel tweaks you might like:
Download Kernel Adiutor Mod since it's easier for this.
Set governor as Interactive and in CPU Governor Tunables, add according to this screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The target loads do not need to make a new line, one spacing for each of them is the way it is written.
For example, write it as: 95 200000:60 300000:33 and so on.
For better multitasking:
I'm getting lags on MM, too. Might just "upgrade" back to LP and give your kennel a try...
may i ask where the download link is ?
dreamteam said:
may i ask where the download link is ?
Click to expand...
Click to collapse
At the top, there is a tab for downloads.
AutumQueen92 said:
At the top, there is a tab for downloads.
Click to expand...
Click to collapse
???
Must be blind...
temporarium said:
???
Must be blind...
Click to expand...
Click to collapse
You can see it in the attached image
bauner said:
You can see it in the attached image
Click to expand...
Click to collapse
So I can't download it using the XDA Labs app? Ok. Will use a browser....
Could you add some more CPU Governor in the future releases?
surVfate said:
Could you add some more CPU Governor in the future releases?
Click to expand...
Click to collapse
It depends. What governor, where is the commit for it, what makes it so special.
Updated to V2, refer to my commits for detailed changed/additions
AutumQueen92 said:
Updated to V2, refer to my commits for detailed changed/additions
Click to expand...
Click to collapse
Hi AutumQueen92,
I would like to ask you a few questions, if you don't mind...
- Have you tried a Forest-LP kernel ?
- If „Yes“, what is the difference between those two... ?
- Is your kernel overclocked ?
- What is your experience between those three kernels when you compare them (Bauner's, Forest-LP and your own) ?
- Don't be too polite and then not to write about your kernel too... [emoji2]
Thanks in advance.
Cheers ! [emoji481] [emoji481]
Sent from my GT-N7000 using XDA-Developers Legacy app
Oh my, double posting is amazing
Boombastical said:
Hi AutumQueen92,
I would like to ask you a few questions, if you don't mind...
- Have you tried a Forest-LP kernel ?
- If „Yes“, what is the difference between those two... ?
- Is your kernel overclocked ?
- What is your experience between those three kernels (Bauner's, Forest-LP and your own) ?
- Don't be too polite and then not to write about your kernel too... [emoji2]
Thanks in advance.
Cheers ! [emoji481] [emoji481]
Sent from my GT-N7000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
1. Yeah I've tried it.
2. If you mean this kernel and his, we both used different toolchains (compilers). I'm not sure what UberTC does but the one I used is made to optimise the Note's CPU itself so it works better. But then Forest's kernel has some kind of overclocked display panel, I'm not sure what that is. It's been a long time since I used his kernel so mine is more updated since it's based on Bauner's.
3. Nope, I don't want overclock. Apps these days are made for quad-core CPUs, so overclock will do nothing except hurt your hardware.
4. I haven't been using Forest's kernel very long, I preferred War kernel or Bauner's stock kernel better. By combining those two to make mine, I feel that it's faster now although I want to do a longer usage without rebooting. Lately I've been rebooting a lot to stabilise the kernel and make some fixes, but the first usage is already showing good results. I'm trying to implement my custom tweaks, if I can't embed it into the kernel I'll post a small section for it in next month's update. Right now battery usage is about the same but better performance.
5. ??? You mean I should post a more detailed explanation about the kernel?
AutumQueen92 said:
1. Yeah I've tried it.
2. If you mean this kernel and his, we both used different toolchains (compilers). I'm not sure what UberTC does but the one I used is made to optimise the Note's CPU itself so it works better. But then Forest's kernel has some kind of overclocked display panel, I'm not sure what that is. It's been a long time since I used his kernel so mine is more updated since it's based on Bauner's.
3. Nope, I don't want overclock. Apps these days are made for quad-core CPUs, so overclock will do nothing except hurt your hardware.
4. I haven't been using Forest's kernel very long, I preferred War kernel or Bauner's stock kernel better. By combining those two to make mine, I feel that it's faster now although I want to do a longer usage without rebooting. Lately I've been rebooting a lot to stabilise the kernel and make some fixes, but the first usage is already showing good results. I'm trying to implement my custom tweaks, if I can't embed it into the kernel I'll post a small section for it in next month's update. Right now battery usage is about the same but better performance.
5. ??? You mean I should post a more detailed explanation about the kernel?
Click to expand...
Click to collapse
No, thanks !
Everything is clear now !
I already have downloaded your kernel last week and I'm gonna flash it now, cause I'm already few months using Forest-LP OC kernel and it is very stable kernel ... With no „reboots“ at all...
I'll report my experience after few weeks with your kernel...
Thanks again for explaining your work. [emoji106]
Sent from my GT-N7000 using XDA-Developers Legacy app
Boombastical said:
No, thanks !
Everything is clear now !
I already have downloaded your kernel last week and I'm gonna flash it now, cause I'm already few months using Forest-LP OC kernel and it is very stable kernel ... With no „reboots“ at all...
I'll report my experience after few weeks with your kernel...
Thanks again for explaining your work. [emoji106]
Sent from my GT-N7000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
After less than a day of using your kernel I'm amazed with working of it, but I use „performance“ governor and it works great. How difficult for you is to OC this one to 1,6 GHz ?
Sent from my GT-N7000 using XDA-Developers Legacy app
Boombastical said:
After less than a day of using your kernel I'm amazed with working of it, but I use „performance“ governor and it works great. How difficult for you is to OC this one to 1,6 GHz ?
Sent from my GT-N7000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
That's very hard to believe because performance governor just clocks your CPU at max frequency the entire time. Also very impossible, I don't want OC on the Note 1. If you want it so badly you can try building your own kernel and adding it.
Boombastical said:
After less than a day of using your kernel I'm amazed with working of it, but I use „performance“ governor and it works great. How difficult for you is to OC this one to 1,6 GHz ?
Sent from my GT-N7000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
The performance governor is not a good idea.
As @AutumQueen92 said it will run the cpu at the highest clock all the time.
After a very short time it will reach the thermal throttling temperature and then it will constantly switch between 800 and 1400Mhz
You can see it with this app
https://play.google.com/store/apps/details?id=com.yanyan.cputemp
Using V1 right now and it is very stable, should I flash the V2? Also one more thing is it possible to tweak the minimum brightness value to 1 without changing the source value and rebuild the whole kernel afterward? Thanks!
bauner said:
The performance governor is not a good idea.
As @AutumQueen92 said it will run the cpu at the highest clock all the time.
After a very short time it will reach the thermal throttling temperature and then it will constantly switch between 800 and 1400Mhz
You can see it with this app
https://play.google.com/store/apps/details?id=com.yanyan.cputemp
Click to expand...
Click to collapse
I know that thermal throttling is something what can be a problem but I have monitoring app which show me all the time what is a current temperature of processor and untill now I have no problem at all except that battery life is half of what it should be normaly...
Actually, when I wrote last post I was on „Ineractive“ governor and now I use „Performance“ governor and „cfq“ scheduler with 256 kb „read ahead“ value on the internal memory and also on the SD card. So I'll update you how far I will be satisfied with this combo. In the next few weeks I also will flash new from the scratch again your LP rom and again test it with your kernel and then again with Forest LP kernel and then at least with this one kernel...
Sent from my GT-N7000 using XDA-Developers Legacy app
Noob Kernel
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app
failed. Please do some research if you have any concerns about
features included in this ROM before flashing it! YOU are
choosing to make these modifications, and if you point
the finger at me for messing up your device, I will laugh at
you. If you dont like this rom, Stay away from this thread!
I don't like large threads. My old espresso needs an up, so where we go.
It's based on latest omap4 common by unlegancy-android with these changes:
Note: Anyone who is facing bootloop on 22nd build, try using 20th build, it should work and lemme know
New 22-01-2019
Download here
20-01-2019
Download Here 20-01-2019
Btw is anyone interested for kitkat?
Notes:
Give a few minutes after reboot for the tablet to show its speed.
Choose lulzactive I think its good! use exkm or smart pack kernel auditor
Btw I never got any feedback on the kernel
Changes in new Build 22-01-2019
Enabled CPU slight overclock to 1200 MHz (Please give feedback on what you think)
Added Darkness gov
Added Frandom support
Improved SIO i/o scheduler
Improved Touch Boost
Changes in New Build 20-01-2019:
Added SIO i/o scheduler
Improved lulzactive gov
Improved Interactive gov
Switched to UberTC
Lot of patches and fixes
Switched to UberTC
[*]Compiled with custom Linaro GCC by @Christopher83.
Touch boost by sultanxda. ( Enable this using kernel manager like EXKM in cpu settings)
LULZACTIVE GOV
PEGASUSQ GOV
Sio i/o scheduler
Will add more stuff
Lemme know anything about these in comments, as i am just starting to learn.
I am still a noob, just tried something to learn and pass time.
Any suggetions are welcome.
If you have problems please tell me with logs.
All credits to Android Andi, Ziyan, tuxafgmur, And so many others!
Mini-FAQ:
Q: It works on all ROMs? Nougat?
R: It should work on any recent ROM who use omap4 common by unlegancy-android.
Quote:
Q: All variants?
R: IDK it should,
Works on my p3100 running smart-T RR.
Q: Works with ramdisk mods? (Magisk)
R: Yes, by AnyKernel2.
XDA:DevDB Information
Noob Kernel, Kernel for the Samsung Galaxy Tab 2
Contributors
bipindr123, Android-Andi, Ziyan, tuxafgmur, dcastro172, so many others!
Source Code: https://github.com/Unlegacy-Android/android_kernel_ti_omap4
Kernel Special Features:
Version Information
Status: Stable
Created 2019-01-18
Last Updated 2019-02-10
Reserved.
IDK what it means tho
Okay for anyone who dosent know how to use touch boost, open smart pack kernel auditor or exkm app and use these settings. Tweak them as you like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bipindr123 said:
Reserved.
IDK what it means tho
Click to expand...
Click to collapse
When you reserve a post you can edit it later if needed :good:
Sent from my Samsung SM-A300H using XDA Labs
Hey there, will this work on my P3100 running SlimRom Nougat? Thanks!
Thanks!
Will test ASAP and report here!
Idea: is it possible to get some build with 1.4 or 1.5 GHZ like MM or LP kernels we had previously for this tab ? maybe it could boot at 1.2GHZ but with the proper tools (like setcpu) this higher levels would be possible as the user would test this possibility in each device! This boost is the only way to get updated apps and games to run properly in these tabs today and even battery savings can be reached with the right tweaking!
tasnim_tamim said:
Hey there, will this work on my P3100 running SlimRom Nougat? Thanks!
Click to expand...
Click to collapse
It should!
galoneta said:
Thanks!
Will test ASAP and report here!
Idea: is it possible to get some build with 1.4 or 1.5 GHZ like MM or LP kernels we had previously for this tab ? maybe it could boot at 1.2GHZ but with the proper tools (like setcpu) this higher levels would be possible as the user would test this possibility in each device! This boost is the only way to get updated apps and games to run properly in these tabs today and even battery savings can be reached with the right tweaking!
Click to expand...
Click to collapse
Yes I could but not sure how much it will effect CPU life, Android Andi said he dosent want to burn his CPU, but I can make a test build with those frequencies and try it out and tweak voltages to get some idea
Bootloop on latest ressurection remix
Thanks for this kernel my tab now feels a lot smoother.:highfive:
here also bootloop with latest AICP on my p5110
jori55 said:
here also bootloop with latest AICP on my p5110
Click to expand...
Click to collapse
Send me a pm I wanna test with your device.
lukigno95 said:
Bootloop on latest ressurection remix
Click to expand...
Click to collapse
Is yours p5100? If yes then send me a pm
Cuz I am running ressuruction remix on my p3100 with no issues
On Lineage 13 - p5113
20-01-2019 build > works!
22-01-2019 build > bootloops
BachuArg said:
Booloop on Lineage 13 - p5113
Click to expand...
Click to collapse
Could you try the Build 20th and tell me if that boots?
bipindr123 said:
Is yours p5100? If yes then send me a pm
Cuz I am running ressuruction remix on my p3100 with no issues
Click to expand...
Click to collapse
I'm on p5100 3g
bipindr123 said:
Could you try the Build 20th and tell me if that boots?
Click to expand...
Click to collapse
Yes!
It worked!
Do you have any recommendations to configure the kernel to get the tablet run faster and smoother? I dont care much about battery.
BachuArg said:
Yes!
It worked!
Do you have any recommendations to configure the kernel to get the tablet run faster and smoother? I dont care much about battery.
Click to expand...
Click to collapse
Thanks for the info,
You can enable touch boost with the settings i provided in the the second post, just change the boot duration to 1000 or 500 ms!
Switch to SIO i/o in IO scheduler settings.
Switch to LULZACTIVE GoV
Also do you use telegram?
Getting a boot loop on the kernel from 22/01/2019, but boots fine with the kernel from 20/01/2019.
Using P5110 with OmniROM with Android 7.1.
Am I missing much on the older version?
evolutionqy7 said:
Getting a boot loop on the kernel from 22/01/2019, but boots fine with the kernel from 20/01/2019.
Using P5110 with OmniROM with Android 7.1.
Am I missing much on the older version?
Click to expand...
Click to collapse
Dont worry I will be dropping a new build soon.
Seems to me like the bootloop on p5XX devices is caused by Overclocking to 1200Mhz :/
Hi.
I have both: P3110 and P5110 and both run 1.52GHZ fine with CandySiX-espressowifi-1.1.1-UNOFFICIAL-0320.zip + DhollmenM-Espresso_Kernel_20160629-P5110.zip OR DhollmenM-Espresso_Kernel_20160629-P3110.zip !
It is this limit I would like to test with updated ROMs and your kernel!
Thanks again.
PS: I can test your kernel builds with this updated frequencies if you need!