asking about cyanogenmod for ZR C5502 - Sony Xperia ZR

Hello everybody
I have a big problem with C5502 Xperia ZR Storage after upgrade to lollipop Stock Rom
now i have unlock my bootloader
when i try to download my device CM Rom via this link
download.cyanogenmod.org/?device=dogo
i was check the Device Wiki and i have found that is C5503 dogo
wiki.cyanogenmod.org/w/Dogo_Info
the 1st question is : can i install the C5503 for My C5502 ??
the 2nd question is : if i can install it that is mean i will have more space after install CM ?
Thanks for every XDA-Developers Members

You can install it. Not sure about the available space, but the size of /data remains as 4.59 GB (for 8 GB version); since CM doesn't have any pre-installed user apps, more of would be available to you on a fresh install.
Sent from my LG-D855 using Tapatalk

SirVer said:
You can install it. Not sure about the available space, but the size of /data remains as 4.59 GB (for 8 GB version); since CM doesn't have any pre-installed user apps, more of would be available to you on a fresh install.
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Thanks for reply me
the FTF Stock is 1.1 GB
The Whole CM maybe 500 MB Max
i think it will effect the 4.59 GB
can any one tell me about this ?

No, that only takes up space in the /system partition, does not affect user accessible internal storage at all. It's only relevant if you plan on installing a lot of apps as system apps (not advised) and/or flashing a lot of mods (like PureAudio or Social Camera and things like that). It also affects the size of your nandroid backups, if that's important to you.
Sent from my LG-D855 using Tapatalk

Related

[ROM][CM10] Unofficial CM10+Fuse for P990

- What is FUSE?
Here: http://forum.xda-developers.com/showthread.php?t=1970138
- First of all know that:
There will be a full DATA WIPE will erase the internal memory also.
I am not responsible for any damage that may occur.
I have performed this operation more than 20 times and have not had any problems.
Once this flashing the ROM, do not unplug the cable to complete the operation.
- About this ROM
This ROM is based on CM10 "20121030-NIGHTLY-P990" and has got CWM 6.0.1.5.
It's exactly the same except for the change in the ramdisk and the file "storage_list.xml".
- How to install the ROM?
In this case we can not use CWM, since before we partition the EMMC.
We follow the following steps:
· Unzip the file. ZIP
· Turn off the device.
· Remove the battery.
· Press Vol + and Vol-and connect the USB cable.
· Double-click the file flash.bat and wait about 3 minutes.
· Unplug the USB cable.
· Insert the battery.
· Switch on the device
· Optionally: Boot in recovery mode and install last gapps
- I can go back to the state before partitioning?
Yes, I'll upload another file to return to the previous, still using nVFlash that is posted on this forum you can also return to the previous state.
http://forum.xda-developers.com/showthread.php?t=1975274
- I can still install CM nightly?
No, because if it is an upgrade, be crushed file "storage_list.xml" and ramdisk. As a result, you can still use the phone, but will not recognize the internal partition.
If one accepts this change in the repository of P990, we can make updates as always.
- First install? Download this:
http://progmaq.com/cm10/progmaq-newfuse.zip
- Updates? Yeah, this is last build (Install by CWM):
http://progmaq.com/cm10/cm-10-20121108-FUSE-p990.zip
Credits:
- CM for CM10.
- RC for p990 repo.
- And me for implement fuse in CM10.
First blood .
Can you please give us some specs about the rom
Sent from my LG-P990 using Tapatalk
Did you do with this a larger system partition?
and maybe you can give some credits...
Trying...........Thanks
pablo86ht said:
Did you do with this a larger system partition?
and maybe you can give some credits...
Click to expand...
Click to collapse
No system partition fuse!
New partition is DATA + EMMC.
Screenshot:
http://imageshack.us/photo/my-images/90/screenshot2012110410465.png/
http://imageshack.us/photo/my-images/12/screenshot2012110410462.png/
Wow, this looks awesome
But can you use the external sd, of for example 16GB as data+sdcard?
ProgMaq said:
No system partition fuse!
New partition is DATA + EMMC.
Screenshot:
http://imageshack.us/photo/my-images/90/screenshot2012110410465.png/
http://imageshack.us/photo/my-images/12/screenshot2012110410462.png/
Click to expand...
Click to collapse
I understand your explanation about merging both DATA and EMMC partition. But I am asking if you have modified the size of the system partition, which is a bighandicap in CM10.
And I repeat myself again: you should give credits.
pablo86ht said:
I understand your explanation about merging both DATA and EMMC partition. But I am asking if you have modified the size of the system partition, which is a bighandicap in CM10.
And I repeat myself again: you should give credits.
Click to expand...
Click to collapse
Credits?
To CM for CM10, RC for p990 repo and me for implement fuse in cm10.
System partition has 384 mb now. (+34 mb)
Cache partition has 128 mb now (+64 mb)
With this, full paranamic photos don't crash for me
I really like the idea and wish it was the default :good:
I also wish you'd put the credits in the first post, it's not that hard :highfive:
Grettings.
Can you make a version with 1104 nightly as it have fixed a couple of things.
Cheers
Sent from LG 2X using Tapatalk 3 Beta
Rayman96 said:
Can you make a version with 1104 nightly as it have fixed a couple of things.
Cheers
Sent from LG 2X using Tapatalk 3 Beta
Click to expand...
Click to collapse
No problem
Downloading 1104 now.
Size of system and cache is OK for next build?
This rom have the same bugs as the cm10 nightly?
yes
when it´s done why new nightle I try it! thank u
maharu567 said:
This rom have the same bugs as the cm10 nightly?
Click to expand...
Click to collapse
The answer is no. This ROM has bugs from CM10 + bugs introduced by the KANG itself.
So please when using this KANG never report bugs to CM10 thread because bugs should come from KANG.
Also if you want to contribute to CM10 debugging avoid using KANG till end of the month. I am talking as an anonymous user who is willing a robust CM10 ROM as fast as possible : you certainly understand that KANG introduce debugging noise.
Otherwise ProgMaq thank you for your efforts.
Sent from my LG-P990 using xda premium
To be honest I prefer UMS over FuseFS
But that's just my opinion
Sent from my Galaxy Nexus using XDA Premium HD app
owain94 said:
To be honest I prefer UMS over FuseFS
But that's just my opinion
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
+1
Good to see you here, though you left. Will you be Kanging any CM10 roms in the near future?
owain94 said:
To be honest I prefer UMS over FuseFS
But that's just my opinion
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Hope to hear news of your g2x project soon
Sent from my LG-P999 using Tapatalk 2
Can fuse be combined with stock based custom roms?
Good development
This is nice. I will test it on the weekend.
Can you provide an CWM flashable file just for the changes on ramdisk and storage_list.xml?
This way, after flashing the first time with nVFlash, we can update nightlies as usual and flash the file after that.
Maybe the storage_list.xml file can be kept just by placing it on the custom_backup_list.txt file. But I dont know how to keep ramdisk when flasing a new nightly.

[ROM][2.3.4] XPERIA SLIM [V2.20] [Arc(s)/Neo(v)/Pro/Ray]

Xperia Slim Version 2.20
Features List
Based on 4.0.2.A.0.62
Running Android 2.3.4(GB)
Camera tweaks
New build.prop
Some init.d tweaks
All bloatware removed
Latest SuperSU
Deepsleep working perfectly
Faster networking(2g/3g/wifi)
Fast
Stable
Smooth
Small in size
Loads of free RAM
Loads of free internal storage
Antutu score of over 7000
No widgets - a pack will be created
Tweaked Camera
Bug free
Click to expand...
Click to collapse
Why choose this ROM?
This ROM is so light (Under 90mb) but is lightening fast and amazingly smooth! This ROM is perfect for those who use add-onn packs to make their device look better or function better. This ROM is a perfect GB base for all of your modding needs. With amazing battery life and the smoothest experience of your ROM history! No frills, just performance and battery life!
What devices does this support?
Xperia Arc
Xperia Arc S
Xperia Neo
Xperia Neo V
Xperia Pro
Xperia Ray
Click to expand...
Click to collapse
Screenshots
Changelog
V1.00
Initial release
V2.00
Bug fixes
Faster
Aroma installer
V2.10
Made even faster
New build.prop
new init.d
Fixed a bug
removed aroma
V2.20
Fixed camera bug
Downloads
ROM
ROM V2.20 - http://www.mediafire.com/download/8ufh01nd28y437n/XperiaSlim-signed.zip
Patches
LT18i Arc S - http://www.mediafire.com/download/dj1yjc4353c361v/arcs-patch-xperia-slim.zip
MK16i Pro - http://www.mediafire.com/download/9sa4f8fgtpdb1v8/pro-patch-xperia-slim.zip
MT15i Neo - http://www.mediafire.com/download/2ri6mqd0p9fd2lk/neo-patch-xperia-slim.zip
MT11i Neo V - http://www.mediafire.com/download/95xo32v4bh8zs9l/neov-patch-xperia-slim.zip
ST18i Ray - http://www.mediafire.com/download/kx85p58g9842wdw/ray-patch-xperia-slim.zip
Known issues
None
Best baseband/kernel
Arc:
Kernel: DoomKernel v22
Baseband: 83
Arc S :
Kernel: DoomKernel v22
Baseband: 83
Pro
Kernel: Stock
Baseband: 77
Neo
Kernel: NightElf Experimental 10.1 Version
Baseband: 77
Neo V
Kernel: NightElf Experimental 10.1 Version
Baseband: 77
Ray
Kernel: DoomKernel
Baseband: 64
How to install from another ROM
Copy the .zip files to your CD card
Boot into CM recovery
Make a backup
Factory Reset
Format system
Format dalvik cache
flash the .zip packages (ROM > patch if needed > wifi modules > baseband libs)
Reboot (Remember, first boot ALWAYS takes the longest)
Go through the setup process
leave to settle for 5-15 minutes
Open super user and update the binary files
Reboot
Your ready to go!
How to make this ROM Better/Faster
Remove setup guide once the ROM is installed (it uses 2.1MB of RAM and a super small amount of CPU power)
Disable ALL animations (Animations take about 0.2 seconds to complete, remove them to load menus instantly)
Update SuperSU apk using the app store
Update SuperSU binary files from within the app
Fix permissions
Credits
DooMLoRD
FXP
Sony
doomed151
OmenHTX
limeunlimited
DooMLoRD
papayayoghurt
buidoidaihiep
FlamEmo
Chainfire
OmenHTX's
FlorinXstyle's
pajoneer's
marangoni
Click to expand...
Click to collapse
Click thanks if you like my ROM - Please leave feedback too! - Please donate if you can! My ROM development is so hard as I only have an Arc which is broken! The touch screen is faulty in places so if you donate I can test more and make many more stuff for you all!
Is all bloatware deleted? All Sony applications like Play golf or play now or like that? All ROM GB I find have lot of useless applications and I've no more space for my applications!
TheJurassien said:
Is all bloatware deleted? All Sony applications like Play golf or play now or like that? All ROM GB I find have lot of useless applications and I've no more space for my applications!
Click to expand...
Click to collapse
read the description and yes!
Ok where can I download basebands? Im on 56..
And what differences betwen this ROM and xperia Plus? Your other ROM?
TheJurassien said:
Ok where can I download basebands? Im on 56..
And what differences betwen this ROM and xperia Plus? Your other ROM?
Click to expand...
Click to collapse
Look in the general section, you will see it there, or just google "xperia arc baseband collection xda"
This ROM is pure speed and nothing special. It has the normal music player. Its basic excluding battery percentage and quick toggles. You can then install add-ons to make it unique for you
apmartin1991 said:
Look in the general section, you will see it there, or just google "xperia arc baseband collection xda"
This ROM is pure speed and nothing special. It has the normal music player. Its basic excluding battery percentage and quick toggles. You can then install add-ons to make it unique for you
Click to expand...
Click to collapse
Okay thanks a lot!
Last question: MX player is included? This player is juste perfect.. more than perfect.
I'll try your ROM now, I hope I'll not be deceived =P do you want some back?
TheJurassien said:
Okay thanks a lot!
Last question: MX player is included? This player is juste perfect.. more than perfect.
I'll try your ROM now, I hope I'll not be deceived =P do you want some back?
Click to expand...
Click to collapse
Nope, the normal music player is included. MX player can be added by yourself. plenty of flashable zips for that
hem I've a lot of useless applications...
xperia hot shots
lets golf
wisepilot
mcAfee
optain games
neoreader
officesuite
UEFA
Update center
Gams and applications
LiveWare manager
Forget it sorry!
For the moment, really fast! Good ROM!
...
TheJurassien said:
hem I've a lot of useless applications...
xperia hot shots
lets golf
wisepilot
mcAfee
optain games
neoreader
officesuite
UEFA
Update center
Gams and applications
LiveWare manager
Forget it sorry!
For the moment, really fast! Good ROM!
...
Click to expand...
Click to collapse
None of those are in this ROM
Sent from my Nexus 4 using xda app-developers app
TheJurassien said:
hem I've a lot of useless applications...
xperia hot shots
lets golf
wisepilot
mcAfee
optain games
neoreader
officesuite
UEFA
Update center
Gams and applications
LiveWare manager
Forget it sorry!
For the moment, really fast! Good ROM!
...
Click to expand...
Click to collapse
Don't put false information about my ROM. Those apps are NOT in this ROM. You need to flash system, data, dalvik and flash my ROM....
Sent from my Nexus 4 using xda app-developers app
hi, does this ever need supercharger?
jtdc said:
hi, does this ever need supercharger?
Click to expand...
Click to collapse
Nope
thanks! i am curious so i tried installing this, but i wasn't successful. i put doomkernel v22, format data/cache/dalvik, and installed the rom.
however after the progress bar gets filled, its just hanged (see attached pic).
long press on the power restores control back in CWM main menu, and i did format data/cache/dalvik again, then finally reboot.
after that, the phone just remains hanged on the doomkernel logo.
EDIT : i tried Xperia Plus Version 9, and the same issue happens. just for isolation i tried reinstall arconium 8.2 and it installs without that problem.
any suggestion?
jtdc said:
thanks! i am curious so i tried installing this, but i wasn't successful. i put doomkernel v22, format data/cache/dalvik, and installed the rom.
however after the progress bar gets filled, its just hanged (see attached pic).
long press on the power restores control back in CWM main menu, and i did format data/cache/dalvik again, then finally reboot.
after that, the phone just remains hanged on the doomkernel logo.
EDIT : i tried Xperia Plus Version 9, and the same issue happens.
any suggestion?
Click to expand...
Click to collapse
Your not giving it long enough. Install either again and leave it for 5 minutes. The status bar is setup badly so it shows its complete when its not
I am trying to fix it in v10 of xperia plus and v1.10 of xperia slim. Just testing v1.10 now
thanks! i think i rather wait for 1.10. believe me i waited 5 minutes and more. a very slim 90MB install shouldn't take that unusually long, don't you think?
jtdc said:
thanks! i think i rather wait for 1.10. believe me i waited 5 minutes and more. a very slim 90MB install shouldn't take that long, don't you think?
Click to expand...
Click to collapse
Takes a few minutes to install. v1.10 will be out soon. Ironing out a few bugs.
apmartin1991 said:
Don't put false information about my ROM. Those apps are NOT in this ROM. You need to flash system, data, dalvik and flash my ROM....
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Yeah I'm sorry, because of a fail during format /system, those apps stayed in the ROM. I reformated all and now no one of those apps are in the ROM.
That's why I said "forget it sorry"!
TheJurassien said:
Yeah I'm sorry, because of a fail during format /system, those apps stayed in the ROM. I reformated all and now no one of those apps are in the ROM.
That's why I said "forget it sorry"!
Click to expand...
Click to collapse
No worries, I am going to modify my install script to format the system and dalvik before flashing the ROM to help avoid problems
apmartin1991 said:
No worries, I am going to modify my install script to format the system and dalvik before flashing the ROM to help avoid problems
Click to expand...
Click to collapse
A only bug in the ROM I saw: When, in notification bar, you swipe a notification to delete it, notification bar-process stop.
TheJurassien said:
A only bug in the ROM I saw: When, in notification bar, you swipe a notification to delete it, notification bar-process stop.
Click to expand...
Click to collapse
Fixed in v1.10 Which is being tested right now. Few new things. Few new looks too!

Best way for increase memory in CM10

Hello,
If you know in cm10 xperia x8 have few space, can any one tell me which method is better for increase space?
An which rom 4.1+ i now better?
Thanks for reply!
chrissykess said:
Hello,
If you know in cm10 xperia x8 have few space, can any one tell me which method is better for increase space?
An which rom 4.1+ i now better?
Thanks for reply!
Click to expand...
Click to collapse
Search for jb odex,it should provide some extra space.
Try using minicm10,or jellybean by davee,they are most developed roms.
Btw. odex won't work with any davee's rom or with based on it (so probably all roms from yari too). For me litecm10 is great, it's just lighter minicm10. It's usable but only if you are not going to listen to music from phone, 4.1+x8+music=lags everywhere. But if you want jb look and fast rom just wait some time for optimus nexus me v6 - I've seen screens on facebook and it will be very very jelly
The best way to increase free space:
- drop every sh!t from the rom
- odex it
- remove all languages from the rom
- check how many mb used in /system and compile the kernel with new partition sizes
You can gain 20-25 mb after removing the languages (go into the minicm10 faq thread, I wrote earlier how to do it), you also gain another 40-50 mb additional space after changing the gigantic latinime and trebuchet to any normal sized app and removed the trash (wallpapers, ringtones, etc...)
You lost some space on /system after odexing, but you win lot of space on /data.
You can shrink the /system partition size in the kernel config to make bigger /data partition (and remove the /recovery partition, this is useless, only 10 mb wasted space).
If you do these steps, you can get free space on /data partition up to 250 mb.
Sent from my Xperia Z using xda app-developers app
pilu1978 said:
The best way to increase free space:
- drop every sh!t from the rom
- odex it
- remove all languages from the rom
- check how many mb used in /system and compile the kernel with new partition sizes
You can gain 20-25 mb after removing the languages (go into the minicm10 faq thread, I wrote earlier how to do it), you also gain another 40-50 mb additional space after changing the gigantic latinime and trebuchet to any normal sized app and removed the trash (wallpapers, ringtones, etc...)
You lost some space on /system after odexing, but you win lot of space on /data.
You can shrink the /system partition size in the kernel config to make bigger /data partition (and remove the /recovery partition, this is useless, only 10 mb wasted space).
If you do these steps, you can get free space on /data partition up to 250 mb.
Sent from my Xperia Z using xda app-developers app
Click to expand...
Click to collapse
Ćan you tell me best way for odex rom. I find some thead, but what kind you prefer?

[MOD][Alpha v4 for bone stk now]SD Swap flash + initd For JB 4.1.2

I polished this for the xt907. It should work as is on the unlocked mb866. I have used Photon Q recovery & Rom Manager since I learned it was the first usable recovery for the Atrix HD.
Be sure to back up as it is untested on a mb866.
Adds initd support & SD swap. All storage defaults to storage0 (your real SD card) which is the way it should have been from Motorola, well closer anyway.
This internal SD ("data/media") memory now has no purpose. You can move what you want to your real SD & delete everything else to let the phone use it all.
UpDate I did not Know that TWRP 263 fails where Philz v6 succeeds.
Just go here to get Philz v6 & swap v3 :
http://forum.xda-developers.com/showthread.php?p=48398998#post48398998
Download zip & flash with Philz v6, Wipe dalvik & cache only
Oh & let me know if it works or not?
Old thread with similar mod.
aviwdoowks said:
I polished this for the xt907. It should work as is on the unlocked mb866. I have used Photon Q recovery & Rom Manager since I learned it was the first usable recovery for the Atrix HD.
Be sure to back up as it is untested on a mb866.
My Thread for instructions on the odexed (good for deodexed roms too) version.
Odexed ver is for any rom as there is no UI or Framework mod. Just the initd & scripts
There is a problem with attachments today so go to the above link and it from there.
See attachments NOT WORKING
Here is the direct link:
https://mega.co.nz/#!tBhAmIYS!NKAob5kjKsk0--28a0IWAsLukz6BR5wKYy1fjRskZKc
md5: 2ee7f410551fbb62a5d0375a9b0f26c2
Download zip & follow instructions at above link.
Please DL from this post rather than the XT907.
Oh & let me know if it works.
Old thread with similar mod.
Click to expand...
Click to collapse
I'm not exactly sure what this mod does, even looking the other thread... Can you provide a description, please? Thanks!
mauchito said:
I'm not exactly sure what this mod does, even looking the other thread... Can you provide a description, please? Thanks!
Click to expand...
Click to collapse
Adds initd support & SD swap. All storage defaults to storage0 (your real SD card) which is the way it should have been from Motorola, well closer anyway.
I have revised my SD swap method. Now you can flash this to any stock rom as you like. Wipe dalvik & cache only. Good for SafeStrap roms too. Not for cm based, multuser, or anything but 4.1.2 stock roms!
This internal SD ("data/media") memory now has no purpose. You can move what you want to your real SD & delete everything else to let the phone use it all. All storage defaults to storage0 (your real SD card) which now is the way it should have been from Motorola, well closer anyway.
Always use Plilz v6 as it works as well as TWRP 263.
Always choose any NO when rebooting from CWMR.
Known issues:
Two things will Kill the SD swap: (by messing with install-recovery.sh)
1)Using TWRP older then v2.6 Or cwmr other than Philz v6.
2)If you boot from CWMR and choose yes to "disable recovery flash".
Also) If you mess with multiuser roms feel free to delete 0 , obb & legacy folders in internal sd (storage1).
One more) It is expected for your settings-storage info to be out of whack.
Finally) Create folder in root of the phone with Root Explorer results in an error but is the same as the Rabbit's version & of no consequence. The folder does get created anyway. All else works in the root of the phone.
Does that help?
Very good option for the stock lovers.
Thanks for sharing
SVLAN said:
Very good option for the stock lovers.
Thanks for sharing
Click to expand...
Click to collapse
To everyone:
Is it working? I do not have an Atrix HD. Please give some feedback.
v3 up. No twrp allowed.
aviwdoowks said:
v3 up. No twrp allowed.
Click to expand...
Click to collapse
If I did not already have an SD Swap already running,(I am on Holoblur with his sd swap) I would test this out. Do you think there is a chance for this to work on cm 11?
PeteSeiler2010 said:
If I did not already have an SD Swap already running,(I am on Holoblur with his sd swap) I would test this out. Do you think there is a chance for this to work on cm 11?
Click to expand...
Click to collapse
No way.
Is your separate?
It appears it is.
Sent from my Atrix HD using XDA Premium 4 mobile app
V4 up. Much improved.
aviwdoowks said:
I polished this for the xt907. It should work as is on the unlocked mb866. I have used Photon Q recovery & Rom Manager since I learned it was the first usable recovery for the Atrix HD.
Be sure to back up as it is untested on a mb866.
Adds initd support & SD swap. All storage defaults to storage0 (your real SD card) which is the way it should have been from Motorola, well closer anyway.
This internal SD ("data/media") memory now has no purpose. You can move what you want to your real SD & delete everything else to let the phone use it all.
UpDate I did not Know that TWRP 263 fails where Philz v6 succeeds.
Just go here to get Philz v6 & swap v3 :
http://forum.xda-developers.com/showthread.php?p=48398998#post48398998
Download zip & flash with Philz v6, Wipe dalvik & cache only
Oh & let me know if it works or not?
Old thread with similar mod.
Click to expand...
Click to collapse
Is there anyway to make this work for 4.2.2 or 4.3? I would love to be able to use the SD swap on pacman.
Sent from my Atrix HD using XDA Premium 4 mobile app
PeteSeiler2010 said:
Is there anyway to make this work for 4.2.2 or 4.3? I would love to be able to use the SD swap on pacman.
Sent from my Atrix HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will eventually make a flash out of the script posted for 4.3. There is an alpha I just through together.
aviwdoowks said:
I will eventually make a flash out of the script posted for 4.3. There is an alpha I just through together.
Click to expand...
Click to collapse
Sweet, I will test it when you make it available.
Sent from my Atrix HD using XDA Premium 4 mobile app
PeteSeiler2010 said:
Sweet, I will test it when you make it available.
Sent from my Atrix HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is there still a chance at having a 4.3 or 4.4 version of this SD Swap? I would be a test monkey for you if you need.
PeteSeiler2010 said:
Is there still a chance at having a 4.3 or 4.4 version of this SD Swap? I would be a test monkey for you if you need.
Click to expand...
Click to collapse
Did you try this diy version:
http://forum.xda-developers.com/showpost.php?p=48437512&postcount=4
I may go to Miui which is based on 4.2.2 & work a mod for that.
aviwdoowks said:
Did you try this diy version:
http://forum.xda-developers.com/showpost.php?p=48437512&postcount=4
I may go to Miui which is based on 4.2.2 & work a mod for that.
Click to expand...
Click to collapse
I did not try that, thanks for the information. I like Miui, please keep me posted if you do and if you need testers.

increase ram using SDcard????

As you know all the apps are getting bigger and bigger and Xperia so with it's poor memory of can't handle all of the apps.
Recently I have some bad time with the ram memory (see the attachment)
I read about an app called "ROEHSOFT RAM Expander (SWAP)" it's paid app that use partition from sdcard on ram and it needs a kernal that support swap.
Does anyone tried that app ??
Is there any chance of a hardbrick??
Device : C5303
ROM : Official CM13
Kernal: helium v24.
Thanks in advance
I don't recommend, this will brick your sd card more soon than natural time
n78 shadow said:
As you know all the apps are getting bigger and bigger and Xperia so with it's poor memory of can't handle all of the apps.
Recently I have some bad time with the ram memory (see the attachment)
I read about an app called "ROEHSOFT RAM Expander (SWAP)" it's paid app that use partition from sdcard on ram and it needs a kernal that support swap.
Does anyone tried that app ??
Is there any chance of a hardbrick??
Device : C5303
ROM : Official CM13
Kernal: helium v24.
Thanks in advance
Click to expand...
Click to collapse
No you won't get hardbricked but you'd be doing yourself a deservice as the act of using SWAP is CPU intensive and will degrade your SD Card to a large extent due to many r/w operations that are required.

Categories

Resources